From patchwork Tue Jan 19 17:45:27 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AngeloGioacchino Del Regno X-Patchwork-Id: 12030923 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5C021C433E9 for ; Tue, 19 Jan 2021 21:50:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0BEEE230FE for ; Tue, 19 Jan 2021 21:50:24 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730098AbhASVpL (ORCPT ); Tue, 19 Jan 2021 16:45:11 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38352 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390804AbhASRu6 (ORCPT ); Tue, 19 Jan 2021 12:50:58 -0500 Received: from relay06.th.seeweb.it (relay06.th.seeweb.it [IPv6:2001:4b7a:2000:18::167]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 09855C061382; Tue, 19 Jan 2021 09:45:32 -0800 (PST) Received: from IcarusMOD.eternityproject.eu (unknown [2.237.20.237]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r2.th.seeweb.it (Postfix) with ESMTPSA id 9FA0B3F1D8; Tue, 19 Jan 2021 18:45:30 +0100 (CET) From: AngeloGioacchino Del Regno To: nks@flawful.org Cc: bjorn.andersson@linaro.org, agross@kernel.org, robh+dt@kernel.org, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org, konrad.dybcio@somainline.org, marijn.suijten@somainline.org, martin.botka@somainline.org, jeffrey.l.hugo@gmail.com, AngeloGioacchino Del Regno Subject: [PATCH v4 1/3] soc: qcom: cpr: Move common functions to new file Date: Tue, 19 Jan 2021 18:45:27 +0100 Message-Id: <20210119174529.227074-2-angelogioacchino.delregno@somainline.org> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> References: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org In preparation for implementing a new driver that will be handling CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new file. Signed-off-by: AngeloGioacchino Del Regno --- drivers/soc/qcom/Makefile | 2 +- drivers/soc/qcom/cpr-common.c | 382 +++++++++++++++++++++++++++++ drivers/soc/qcom/cpr-common.h | 113 +++++++++ drivers/soc/qcom/cpr.c | 441 +++------------------------------- 4 files changed, 523 insertions(+), 415 deletions(-) create mode 100644 drivers/soc/qcom/cpr-common.c create mode 100644 drivers/soc/qcom/cpr-common.h diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index ad675a6593d0..8d1262a2e23c 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src) obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o -obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_OCMEM) += ocmem.o diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c new file mode 100644 index 000000000000..70e1e0f441db --- /dev/null +++ b/drivers/soc/qcom/cpr-common.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cpr-common.h" + +int cpr_read_efuse(struct device *dev, const char *cname, u32 *data) +{ + struct nvmem_cell *cell; + ssize_t len; + char *ret; + int i; + + *data = 0; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) { + if (PTR_ERR(cell) != -EPROBE_DEFER) + dev_err(dev, "undefined cell %s\n", cname); + return PTR_ERR(cell); + } + + ret = nvmem_cell_read(cell, &len); + nvmem_cell_put(cell); + if (IS_ERR(ret)) { + dev_err(dev, "can't read cell %s\n", cname); + return PTR_ERR(ret); + } + + for (i = 0; i < len; i++) + *data |= ret[i] << (8 * i); + + kfree(ret); + dev_dbg(dev, "efuse read(%s) = %x, bytes %zd\n", cname, *data, len); + + return 0; +} + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners) +{ + struct fuse_corner *end = fuse_corner + num_fuse_corners; + u32 data; + int ret; + + for (; fuse_corner < end; fuse_corner++, cpr_fuse++) { + ret = cpr_read_efuse(dev, cpr_fuse->ring_osc, + &data); + if (ret) + return ret; + fuse_corner->ring_osc_idx = data; + } + + return 0; +} + +int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, + int adj, int step_volt, const char *init_v_efuse, + struct device *dev) +{ + int steps, uV; + u32 bits = 0; + int ret; + + ret = cpr_read_efuse(dev, init_v_efuse, &bits); + if (ret) + return ret; + + steps = bits & (BIT(init_v_width - 1) - 1); + /* Not two's complement.. instead highest bit is sign bit */ + if (bits & BIT(init_v_width - 1)) + steps = -steps; + + uV = ref_uV + steps * step_size_uV; + + /* Apply open-loop fixed adjustments to fused values */ + uV += adj; + + return DIV_ROUND_UP(uV, step_volt) * step_volt; +} + +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, + int num_fuse_corners) +{ + struct cpr_fuse *fuses; + int i; + + fuses = devm_kcalloc(dev, num_fuse_corners, + sizeof(struct cpr_fuse), + GFP_KERNEL); + if (!fuses) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < num_fuse_corners; i++) { + char tbuf[50]; + + snprintf(tbuf, sizeof(tbuf), "cpr%d_ring_osc%d", tid, i + 1); + fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].ring_osc) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), + "cpr%d_init_voltage%d", tid, i + 1); + fuses[i].init_voltage = devm_kstrdup(dev, tbuf, + GFP_KERNEL); + if (!fuses[i].init_voltage) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), "cpr%d_quotient%d", tid, i + 1); + fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, sizeof(tbuf), + "cpr%d_quotient_offset%d", tid, i + 1); + fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, + GFP_KERNEL); + if (!fuses[i].quotient_offset) + return ERR_PTR(-ENOMEM); + } + + return fuses; +} + +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step) +{ + int uV, ret; + + /* Populate uV */ + uV = cpr_read_fuse_uV(init_v_width, init_v_step, + fdata->ref_uV, fdata->volt_oloop_adjust, + step_volt, cpr_fuse->init_voltage, dev); + if (uV < 0) + return uV; + + /* + * Update SoC voltages: platforms might choose a different + * regulators than the one used to characterize the algorithms + * (ie, init_voltage_step). + */ + fdata->min_uV = roundup(fdata->min_uV, step_volt); + fdata->max_uV = roundup(fdata->max_uV, step_volt); + + fuse_corner->min_uV = fdata->min_uV; + fuse_corner->max_uV = fdata->max_uV; + fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV); + + /* Populate target quotient by scaling */ + ret = cpr_read_efuse(dev, cpr_fuse->quotient, &fuse_corner->quot); + if (ret) + return ret; + + fuse_corner->quot *= fdata->quot_scale; + fuse_corner->quot += fdata->quot_offset; + fuse_corner->quot += fdata->quot_adjust; + + return 0; +} + +/* + * Returns: Index of the initial corner or negative number for error. + */ +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners) +{ + unsigned long rate; + struct corner *iter, *corner; + const struct corner *end; + unsigned int ret = 0; + + if (!cpu_clk) + return -EINVAL; + + end = &corners[num_corners - 1]; + rate = clk_get_rate(cpu_clk); + + /* + * Some bootloaders set a CPU clock frequency that is not defined + * in the OPP table. When running at an unlisted frequency, + * cpufreq_online() will change to the OPP which has the lowest + * frequency, at or above the unlisted frequency. + * Since cpufreq_online() always "rounds up" in the case of an + * unlisted frequency, this function always "rounds down" in case + * of an unlisted frequency. That way, when cpufreq_online() + * triggers the first ever call to cpr_set_performance_state(), + * it will correctly determine the direction as UP. + */ + for (iter = corners; iter <= end; iter++) { + if (iter->freq > rate) + break; + ret++; + if (iter->freq == rate) { + corner = iter; + break; + } + if (iter->freq < rate) + corner = iter; + } + + if (!corner) { + dev_err(dev, "boot up corner not found\n"); + return -EINVAL; + } + + dev_dbg(dev, "boot up perf state: %u\n", ret); + + return ret; +} + +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid) +{ + struct device_node *np; + u32 fc; + + np = dev_pm_opp_get_of_node(opp); + if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fc)) { + pr_debug("%s: missing 'qcom,opp-fuse-level' property\n", + __func__); + fc = 0; + } + + of_node_put(np); + + return fc; +} + +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev) +{ + u64 rate = 0; + struct device_node *ref_np; + struct device_node *desc_np; + struct device_node *child_np = NULL; + struct device_node *child_req_np = NULL; + + desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!desc_np) + return 0; + + ref_np = dev_pm_opp_get_of_node(ref); + if (!ref_np) + goto out_ref; + + do { + of_node_put(child_req_np); + child_np = of_get_next_available_child(desc_np, child_np); + child_req_np = of_parse_phandle(child_np, "required-opps", 0); + } while (child_np && child_req_np != ref_np); + + if (child_np && child_req_np == ref_np) + of_property_read_u64(child_np, "opp-hz", &rate); + + of_node_put(child_req_np); + of_node_put(child_np); + of_node_put(ref_np); +out_ref: + of_node_put(desc_np); + + return (unsigned long) rate; +} + +int cpr_calculate_scaling(const char *quot_offset, + struct device *dev, + const struct fuse_corner_data *fdata, + const struct corner *corner) +{ + u32 quot_diff = 0; + unsigned long freq_diff; + int scaling; + const struct fuse_corner *fuse, *prev_fuse; + int ret; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + if (quot_offset) { + ret = cpr_read_efuse(dev, quot_offset, "_diff); + if (ret) + return ret; + + quot_diff *= fdata->quot_offset_scale; + quot_diff += fdata->quot_offset_adjust; + } else { + quot_diff = fuse->quot - prev_fuse->quot; + } + + freq_diff = fuse->max_freq - prev_fuse->max_freq; + freq_diff /= 1000000; /* Convert to MHz */ + scaling = 1000 * quot_diff / freq_diff; + return min(scaling, fdata->max_quot_scale); +} + +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata) +{ + unsigned long f_high, f_low, f_diff; + int uV_high, uV_low, uV; + u64 temp, temp_limit; + const struct fuse_corner *fuse, *prev_fuse; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + f_high = fuse->max_freq; + f_low = prev_fuse->max_freq; + uV_high = fuse->uV; + uV_low = prev_fuse->uV; + f_diff = fuse->max_freq - corner->freq; + + /* + * Don't interpolate in the wrong direction. This could happen + * if the adjusted fuse voltage overlaps with the previous fuse's + * adjusted voltage. + */ + if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) + return corner->uV; + + temp = f_diff * (uV_high - uV_low); + do_div(temp, f_high - f_low); + + /* + * max_volt_scale has units of uV/MHz while freq values + * have units of Hz. Divide by 1000000 to convert to. + */ + temp_limit = f_diff * fdata->max_volt_scale; + do_div(temp_limit, 1000000); + + uV = uV_high - min(temp, temp_limit); + return roundup(uV, step_volt); +} + +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f) +{ + int ret; + + ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV); + if (!ret) { + dev_err(dev, "min uV: %d not supported by regulator\n", + f->min_uV); + return -EINVAL; + } + + ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV); + if (!ret) { + dev_err(dev, "max uV: %d not supported by regulator\n", + f->max_uV); + return -EINVAL; + } + + return 0; +} diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h new file mode 100644 index 000000000000..83a1f7c941b8 --- /dev/null +++ b/drivers/soc/qcom/cpr-common.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include +#include + +enum voltage_change_dir { + NO_CHANGE, + DOWN, + UP, +}; + +struct fuse_corner_data { + int ref_uV; + int max_uV; + int min_uV; + int range_uV; + /* fuse volt: closed/open loop */ + int volt_cloop_adjust; + int volt_oloop_adjust; + int max_volt_scale; + int max_quot_scale; + /* fuse quot */ + int quot_offset; + int quot_scale; + int quot_adjust; + /* fuse quot_offset */ + int quot_offset_scale; + int quot_offset_adjust; +}; + +struct cpr_fuse { + char *ring_osc; + char *init_voltage; + char *quotient; + char *quotient_offset; +}; + +struct fuse_corner { + int min_uV; + int max_uV; + int uV; + int quot; + int step_quot; + const struct reg_sequence *accs; + int num_accs; + unsigned long max_freq; + u8 ring_osc_idx; +}; + +struct corner { + int min_uV; + int max_uV; + int uV; + int last_uV; + int quot_adjust; + u32 save_ctl; + u32 save_irq; + unsigned long freq; + bool is_open_loop; + struct fuse_corner *fuse_corner; +}; + +struct corner_data { + unsigned int fuse_corner; + unsigned long freq; +}; + +struct acc_desc { + unsigned int enable_reg; + u32 enable_mask; + + struct reg_sequence *config; + struct reg_sequence *settings; + int num_regs_per_fuse; +}; + +struct cpr_acc_desc { + const struct cpr_desc *cpr_desc; + const struct acc_desc *acc_desc; +}; + + +int cpr_read_efuse(struct device *dev, const char *cname, u32 *data); +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners); +int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, + int adj, int step_volt, const char *init_v_efuse, + struct device *dev); +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, + int num_fuse_corners); +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step); +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid); +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev); +int cpr_calculate_scaling(const char *quot_offset, + struct device *dev, + const struct fuse_corner_data *fdata, + const struct corner *corner); +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata); +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f); diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c index b24cc77d1889..29121567956b 100644 --- a/drivers/soc/qcom/cpr.c +++ b/drivers/soc/qcom/cpr.c @@ -25,6 +25,7 @@ #include #include #include +#include "cpr-common.h" /* Register Offsets for RB-CPR and Bit Definitions */ @@ -124,45 +125,12 @@ #define FUSE_REVISION_UNKNOWN (-1) -enum voltage_change_dir { - NO_CHANGE, - DOWN, - UP, -}; - -struct cpr_fuse { - char *ring_osc; - char *init_voltage; - char *quotient; - char *quotient_offset; -}; - -struct fuse_corner_data { - int ref_uV; - int max_uV; - int min_uV; - int max_volt_scale; - int max_quot_scale; - /* fuse quot */ - int quot_offset; - int quot_scale; - int quot_adjust; - /* fuse quot_offset */ - int quot_offset_scale; - int quot_offset_adjust; -}; - struct cpr_fuses { int init_voltage_step; int init_voltage_width; struct fuse_corner_data *fuse_corner_data; }; -struct corner_data { - unsigned int fuse_corner; - unsigned long freq; -}; - struct cpr_desc { unsigned int num_fuse_corners; int min_diff_quot; @@ -184,44 +152,6 @@ struct cpr_desc { bool reduce_to_corner_uV; }; -struct acc_desc { - unsigned int enable_reg; - u32 enable_mask; - - struct reg_sequence *config; - struct reg_sequence *settings; - int num_regs_per_fuse; -}; - -struct cpr_acc_desc { - const struct cpr_desc *cpr_desc; - const struct acc_desc *acc_desc; -}; - -struct fuse_corner { - int min_uV; - int max_uV; - int uV; - int quot; - int step_quot; - const struct reg_sequence *accs; - int num_accs; - unsigned long max_freq; - u8 ring_osc_idx; -}; - -struct corner { - int min_uV; - int max_uV; - int uV; - int last_uV; - int quot_adjust; - u32 save_ctl; - u32 save_irq; - unsigned long freq; - struct fuse_corner *fuse_corner; -}; - struct cpr_drv { unsigned int num_corners; unsigned int ref_clk_khz; @@ -801,95 +731,16 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain, return ret; } -static int cpr_read_efuse(struct device *dev, const char *cname, u32 *data) -{ - struct nvmem_cell *cell; - ssize_t len; - char *ret; - int i; - - *data = 0; - - cell = nvmem_cell_get(dev, cname); - if (IS_ERR(cell)) { - if (PTR_ERR(cell) != -EPROBE_DEFER) - dev_err(dev, "undefined cell %s\n", cname); - return PTR_ERR(cell); - } - - ret = nvmem_cell_read(cell, &len); - nvmem_cell_put(cell); - if (IS_ERR(ret)) { - dev_err(dev, "can't read cell %s\n", cname); - return PTR_ERR(ret); - } - - for (i = 0; i < len; i++) - *data |= ret[i] << (8 * i); - - kfree(ret); - dev_dbg(dev, "efuse read(%s) = %x, bytes %zd\n", cname, *data, len); - - return 0; -} - -static int -cpr_populate_ring_osc_idx(struct cpr_drv *drv) -{ - struct fuse_corner *fuse = drv->fuse_corners; - struct fuse_corner *end = fuse + drv->desc->num_fuse_corners; - const struct cpr_fuse *fuses = drv->cpr_fuses; - u32 data; - int ret; - - for (; fuse < end; fuse++, fuses++) { - ret = cpr_read_efuse(drv->dev, fuses->ring_osc, - &data); - if (ret) - return ret; - fuse->ring_osc_idx = data; - } - - return 0; -} - -static int cpr_read_fuse_uV(const struct cpr_desc *desc, - const struct fuse_corner_data *fdata, - const char *init_v_efuse, - int step_volt, - struct cpr_drv *drv) -{ - int step_size_uV, steps, uV; - u32 bits = 0; - int ret; - - ret = cpr_read_efuse(drv->dev, init_v_efuse, &bits); - if (ret) - return ret; - - steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1); - /* Not two's complement.. instead highest bit is sign bit */ - if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1)) - steps = -steps; - - step_size_uV = desc->cpr_fuses.init_voltage_step; - - uV = fdata->ref_uV + steps * step_size_uV; - return DIV_ROUND_UP(uV, step_volt) * step_volt; -} - static int cpr_fuse_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; - const struct cpr_fuse *fuses = drv->cpr_fuses; + const struct cpr_fuse *cpr_fuse = drv->cpr_fuses; const struct acc_desc *acc_desc = drv->acc_desc; - int i; - unsigned int step_volt; struct fuse_corner_data *fdata; struct fuse_corner *fuse, *end; - int uV; const struct reg_sequence *accs; - int ret; + unsigned int step_volt; + int i, ret; accs = acc_desc->settings; @@ -902,24 +753,16 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) end = &fuse[desc->num_fuse_corners - 1]; fdata = desc->cpr_fuses.fuse_corner_data; - for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) { - /* - * Update SoC voltages: platforms might choose a different - * regulators than the one used to characterize the algorithms - * (ie, init_voltage_step). - */ - fdata->min_uV = roundup(fdata->min_uV, step_volt); - fdata->max_uV = roundup(fdata->max_uV, step_volt); - - /* Populate uV */ - uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage, - step_volt, drv); - if (uV < 0) - return uV; + for (i = 0; fuse <= end; fuse++, cpr_fuse++, i++, fdata++) { + ret = cpr_populate_fuse_common( + drv->dev, fdata, cpr_fuse, + fuse, step_volt, + desc->cpr_fuses.init_voltage_width, + desc->cpr_fuses.init_voltage_step); + if (ret) + return ret; - fuse->min_uV = fdata->min_uV; - fuse->max_uV = fdata->max_uV; - fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV); + fuse->step_quot = desc->step_quot[fuse->ring_osc_idx]; if (fuse == end) { /* @@ -931,16 +774,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) end->max_uV = max(end->max_uV, end->uV); } - /* Populate target quotient by scaling */ - ret = cpr_read_efuse(drv->dev, fuses->quotient, &fuse->quot); - if (ret) - return ret; - - fuse->quot *= fdata->quot_scale; - fuse->quot += fdata->quot_offset; - fuse->quot += fdata->quot_adjust; - fuse->step_quot = desc->step_quot[fuse->ring_osc_idx]; - /* Populate acc settings */ fuse->accs = accs; fuse->num_accs = acc_desc->num_regs_per_fuse; @@ -957,25 +790,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) else if (fuse->uV < fuse->min_uV) fuse->uV = fuse->min_uV; - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->min_uV, - fuse->min_uV); - if (!ret) { - dev_err(drv->dev, - "min uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->min_uV, i); - return -EINVAL; - } - - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->max_uV, - fuse->max_uV); - if (!ret) { - dev_err(drv->dev, - "max uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->max_uV, i); - return -EINVAL; - } + ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse); + if (ret) + return ret; dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n", @@ -986,126 +803,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) return 0; } -static int cpr_calculate_scaling(const char *quot_offset, - struct cpr_drv *drv, - const struct fuse_corner_data *fdata, - const struct corner *corner) -{ - u32 quot_diff = 0; - unsigned long freq_diff; - int scaling; - const struct fuse_corner *fuse, *prev_fuse; - int ret; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - if (quot_offset) { - ret = cpr_read_efuse(drv->dev, quot_offset, "_diff); - if (ret) - return ret; - - quot_diff *= fdata->quot_offset_scale; - quot_diff += fdata->quot_offset_adjust; - } else { - quot_diff = fuse->quot - prev_fuse->quot; - } - - freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; - return min(scaling, fdata->max_quot_scale); -} - -static int cpr_interpolate(const struct corner *corner, int step_volt, - const struct fuse_corner_data *fdata) -{ - unsigned long f_high, f_low, f_diff; - int uV_high, uV_low, uV; - u64 temp, temp_limit; - const struct fuse_corner *fuse, *prev_fuse; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - f_high = fuse->max_freq; - f_low = prev_fuse->max_freq; - uV_high = fuse->uV; - uV_low = prev_fuse->uV; - f_diff = fuse->max_freq - corner->freq; - - /* - * Don't interpolate in the wrong direction. This could happen - * if the adjusted fuse voltage overlaps with the previous fuse's - * adjusted voltage. - */ - if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) - return corner->uV; - - temp = f_diff * (uV_high - uV_low); - do_div(temp, f_high - f_low); - - /* - * max_volt_scale has units of uV/MHz while freq values - * have units of Hz. Divide by 1000000 to convert to. - */ - temp_limit = f_diff * fdata->max_volt_scale; - do_div(temp_limit, 1000000); - - uV = uV_high - min(temp, temp_limit); - return roundup(uV, step_volt); -} - -static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) -{ - struct device_node *np; - unsigned int fuse_corner = 0; - - np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); - - of_node_put(np); - - return fuse_corner; -} - -static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev) -{ - u64 rate = 0; - struct device_node *ref_np; - struct device_node *desc_np; - struct device_node *child_np = NULL; - struct device_node *child_req_np = NULL; - - desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (!desc_np) - return 0; - - ref_np = dev_pm_opp_get_of_node(ref); - if (!ref_np) - goto out_ref; - - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); - child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); - - of_node_put(child_req_np); - of_node_put(child_np); - of_node_put(ref_np); -out_ref: - of_node_put(desc_np); - - return (unsigned long) rate; -} - static int cpr_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -1143,7 +840,7 @@ static int cpr_corner_init(struct cpr_drv *drv) opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level); if (IS_ERR(opp)) return -EINVAL; - fc = cpr_get_fuse_corner(opp); + fc = cpr_get_fuse_corner(opp, 0); if (!fc) { dev_pm_opp_put(opp); return -EINVAL; @@ -1219,7 +916,7 @@ static int cpr_corner_init(struct cpr_drv *drv) corner->uV = fuse->uV; if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) { - scaling = cpr_calculate_scaling(quot_offset, drv, + scaling = cpr_calculate_scaling(quot_offset, drv->dev, fdata, corner); if (scaling < 0) return scaling; @@ -1257,47 +954,6 @@ static int cpr_corner_init(struct cpr_drv *drv) return 0; } -static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv) -{ - const struct cpr_desc *desc = drv->desc; - struct cpr_fuse *fuses; - int i; - - fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners, - sizeof(struct cpr_fuse), - GFP_KERNEL); - if (!fuses) - return ERR_PTR(-ENOMEM); - - for (i = 0; i < desc->num_fuse_corners; i++) { - char tbuf[32]; - - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); - fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].ring_osc) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); - fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].init_voltage) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); - fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].quotient) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); - fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].quotient_offset) - return ERR_PTR(-ENOMEM); - } - - return fuses; -} - static void cpr_set_loop_allowed(struct cpr_drv *drv) { drv->loop_disabled = false; @@ -1329,54 +985,6 @@ static int cpr_init_parameters(struct cpr_drv *drv) return 0; } -static int cpr_find_initial_corner(struct cpr_drv *drv) -{ - unsigned long rate; - const struct corner *end; - struct corner *iter; - unsigned int i = 0; - - if (!drv->cpu_clk) { - dev_err(drv->dev, "cannot get rate from NULL clk\n"); - return -EINVAL; - } - - end = &drv->corners[drv->num_corners - 1]; - rate = clk_get_rate(drv->cpu_clk); - - /* - * Some bootloaders set a CPU clock frequency that is not defined - * in the OPP table. When running at an unlisted frequency, - * cpufreq_online() will change to the OPP which has the lowest - * frequency, at or above the unlisted frequency. - * Since cpufreq_online() always "rounds up" in the case of an - * unlisted frequency, this function always "rounds down" in case - * of an unlisted frequency. That way, when cpufreq_online() - * triggers the first ever call to cpr_set_performance_state(), - * it will correctly determine the direction as UP. - */ - for (iter = drv->corners; iter <= end; iter++) { - if (iter->freq > rate) - break; - i++; - if (iter->freq == rate) { - drv->corner = iter; - break; - } - if (iter->freq < rate) - drv->corner = iter; - } - - if (!drv->corner) { - dev_err(drv->dev, "boot up corner not found\n"); - return -EINVAL; - } - - dev_dbg(drv->dev, "boot up perf state: %u\n", i); - - return 0; -} - static const struct cpr_desc qcs404_cpr_desc = { .num_fuse_corners = 3, .min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF, @@ -1564,8 +1172,9 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, if (ret) goto unlock; - ret = cpr_find_initial_corner(drv); - if (ret) + ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners, + drv->num_corners); + if (ret < 0) goto unlock; if (acc_desc->config) @@ -1650,6 +1259,7 @@ static int cpr_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; struct cpr_drv *drv; + const struct cpr_desc *desc; int irq, ret; const struct cpr_acc_desc *data; struct device_node *np; @@ -1665,6 +1275,7 @@ static int cpr_probe(struct platform_device *pdev) drv->dev = dev; drv->desc = data->cpr_desc; drv->acc_desc = data->acc_desc; + desc = drv->desc; drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners, sizeof(*drv->fuse_corners), @@ -1705,11 +1316,13 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv); + drv->cpr_fuses = cpr_get_fuses(drv->dev, 0, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); - ret = cpr_populate_ring_osc_idx(drv); + ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners, + drv->cpr_fuses, + desc->num_fuse_corners); if (ret) return ret; From patchwork Tue Jan 19 17:45:28 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AngeloGioacchino Del Regno X-Patchwork-Id: 12030925 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3B89CC433E0 for ; Tue, 19 Jan 2021 21:50:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id EF3F3230FE for ; Tue, 19 Jan 2021 21:50:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727996AbhASVol (ORCPT ); Tue, 19 Jan 2021 16:44:41 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38354 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1732015AbhASRu6 (ORCPT ); Tue, 19 Jan 2021 12:50:58 -0500 Received: from relay07.th.seeweb.it (relay07.th.seeweb.it [IPv6:2001:4b7a:2000:18::168]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1557EC061385; Tue, 19 Jan 2021 09:45:32 -0800 (PST) Received: from IcarusMOD.eternityproject.eu (unknown [2.237.20.237]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r2.th.seeweb.it (Postfix) with ESMTPSA id E96B93F1D5; Tue, 19 Jan 2021 18:45:30 +0100 (CET) From: AngeloGioacchino Del Regno To: nks@flawful.org Cc: bjorn.andersson@linaro.org, agross@kernel.org, robh+dt@kernel.org, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org, konrad.dybcio@somainline.org, marijn.suijten@somainline.org, martin.botka@somainline.org, jeffrey.l.hugo@gmail.com, AngeloGioacchino Del Regno Subject: [PATCH v4 2/3] dt-bindings: avs: cpr: Convert binding to YAML schema Date: Tue, 19 Jan 2021 18:45:28 +0100 Message-Id: <20210119174529.227074-3-angelogioacchino.delregno@somainline.org> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> References: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Convert the qcom,cpr.txt document to YAML schema and place it in the appropriate directory, since this driver was moved from power/avs to soc/qcom, but forgets to move the documentation. Fixes: a7305e684fcf ("PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers") Signed-off-by: AngeloGioacchino Del Regno --- .../bindings/power/avs/qcom,cpr.txt | 131 +------------- .../bindings/soc/qcom/qcom,cpr.yaml | 167 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 169 insertions(+), 131 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt index ab0d5ebbad4e..2ada8cd08949 100644 --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt @@ -1,130 +1 @@ -QCOM CPR (Core Power Reduction) - -CPR (Core Power Reduction) is a technology to reduce core power on a CPU -or other device. Each OPP of a device corresponds to a "corner" that has -a range of valid voltages for a particular frequency. While the device is -running at a particular frequency, CPR monitors dynamic factors such as -temperature, etc. and suggests adjustments to the voltage to save power -and meet silicon characteristic requirements. - -- compatible: - Usage: required - Value type: - Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404 - -- reg: - Usage: required - Value type: - Definition: base address and size of the rbcpr register region - -- interrupts: - Usage: required - Value type: - Definition: should specify the CPR interrupt - -- clocks: - Usage: required - Value type: - Definition: phandle to the reference clock - -- clock-names: - Usage: required - Value type: - Definition: must be "ref" - -- vdd-apc-supply: - Usage: required - Value type: - Definition: phandle to the vdd-apc-supply regulator - -- #power-domain-cells: - Usage: required - Value type: - Definition: should be 0 - -- operating-points-v2: - Usage: required - Value type: - Definition: A phandle to the OPP table containing the - performance states supported by the CPR - power domain - -- acc-syscon: - Usage: optional - Value type: - Definition: phandle to syscon for writing ACC settings - -- nvmem-cells: - Usage: required - Value type: - Definition: phandle to nvmem cells containing the data - that makes up a fuse corner, for each fuse corner. - As well as the CPR fuse revision. - -- nvmem-cell-names: - Usage: required - Value type: - Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2", - "cpr_quotient_offset3", "cpr_init_voltage1", - "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1", - "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1", - "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision" - for qcs404. - -Example: - - cpr_opp_table: cpr-opp-table { - compatible = "operating-points-v2-qcom-level"; - - cpr_opp1: opp1 { - opp-level = <1>; - qcom,opp-fuse-level = <1>; - }; - cpr_opp2: opp2 { - opp-level = <2>; - qcom,opp-fuse-level = <2>; - }; - cpr_opp3: opp3 { - opp-level = <3>; - qcom,opp-fuse-level = <3>; - }; - }; - - power-controller@b018000 { - compatible = "qcom,qcs404-cpr", "qcom,cpr"; - reg = <0x0b018000 0x1000>; - interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; - clocks = <&xo_board>; - clock-names = "ref"; - vdd-apc-supply = <&pms405_s3>; - #power-domain-cells = <0>; - operating-points-v2 = <&cpr_opp_table>; - acc-syscon = <&tcsr>; - - nvmem-cells = <&cpr_efuse_quot_offset1>, - <&cpr_efuse_quot_offset2>, - <&cpr_efuse_quot_offset3>, - <&cpr_efuse_init_voltage1>, - <&cpr_efuse_init_voltage2>, - <&cpr_efuse_init_voltage3>, - <&cpr_efuse_quot1>, - <&cpr_efuse_quot2>, - <&cpr_efuse_quot3>, - <&cpr_efuse_ring1>, - <&cpr_efuse_ring2>, - <&cpr_efuse_ring3>, - <&cpr_efuse_revision>; - nvmem-cell-names = "cpr_quotient_offset1", - "cpr_quotient_offset2", - "cpr_quotient_offset3", - "cpr_init_voltage1", - "cpr_init_voltage2", - "cpr_init_voltage3", - "cpr_quotient1", - "cpr_quotient2", - "cpr_quotient3", - "cpr_ring_osc1", - "cpr_ring_osc2", - "cpr_ring_osc3", - "cpr_fuse_revision"; - }; +This file has been moved to ../../soc/qcom/qcom,cpr.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml new file mode 100644 index 000000000000..f58dc6c138a6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Core Power Reduction (CPR) + +description: | + CPR (Core Power Reduction) is a technology to reduce core power on a CPU + or other device. Each OPP of a device corresponds to a "corner" that has + a range of valid voltages for a particular frequency. While the device is + running at a particular frequency, CPR monitors dynamic factors such as + temperature, etc. and suggests adjustments to the voltage to save power + and meet silicon characteristic requirements. + +maintainers: + - Niklas Cassel + +properties: + compatible: + items: + - enum: + - qcom,qcs404-cpr + - const: qcom,cpr + + reg: + description: Base address and size of the RBCPR register region + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref + + clocks: + items: + - description: CPR reference clock + + vdd-apc-supply: + description: Autonomous Phase Control (APC) power supply + + '#power-domain-cells': + const: 0 + + acc-syscon: + description: phandle to syscon for writing ACC settings + + nvmem-cells: + minItems: 9 + maxItems: 32 + description: Cells containing the fuse corners and revision data + + nvmem-cell-names: + minItems: 9 + maxItems: 32 + + operating-points-v2: true + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - vdd-apc-supply + - "#power-domain-cells" + - nvmem-cells + - nvmem-cell-names + - operating-points-v2 + +additionalProperties: false + +examples: + - | + #include + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x100>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr0_quotient_offset1", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_fuse_revision"; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index ad9abb42f852..66052be495fb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14763,7 +14763,7 @@ M: Niklas Cassel L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt +F: Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml F: drivers/soc/qcom/cpr.c QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 From patchwork Tue Jan 19 17:45:29 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AngeloGioacchino Del Regno X-Patchwork-Id: 12030931 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 969CBC433E0 for ; Tue, 19 Jan 2021 21:59:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 57699230FE for ; Tue, 19 Jan 2021 21:59:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728416AbhASV7D (ORCPT ); Tue, 19 Jan 2021 16:59:03 -0500 Received: from relay05.th.seeweb.it ([5.144.164.166]:54059 "EHLO relay05.th.seeweb.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389488AbhASRrK (ORCPT ); Tue, 19 Jan 2021 12:47:10 -0500 Received: from IcarusMOD.eternityproject.eu (unknown [2.237.20.237]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r2.th.seeweb.it (Postfix) with ESMTPSA id 3A9D93F1DA; Tue, 19 Jan 2021 18:45:31 +0100 (CET) From: AngeloGioacchino Del Regno To: nks@flawful.org Cc: bjorn.andersson@linaro.org, agross@kernel.org, robh+dt@kernel.org, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org, konrad.dybcio@somainline.org, marijn.suijten@somainline.org, martin.botka@somainline.org, jeffrey.l.hugo@gmail.com, AngeloGioacchino Del Regno Subject: [PATCH v4 3/3] arm64: qcom: qcs404: Change CPR nvmem-names Date: Tue, 19 Jan 2021 18:45:29 +0100 Message-Id: <20210119174529.227074-4-angelogioacchino.delregno@somainline.org> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> References: <20210119174529.227074-1-angelogioacchino.delregno@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The CPR driver's common functions were split and put in another file in order to support newer CPR revisions: to simplify the commonization, the expected names of the fuses had to be changed in order for both new and old support to use the same fuse name retrieval function and keeping the naming consistent. The thread id was added to the fuse name and, since CPRv1 does not support threads, it is expected to always read ID 0, which means that the expected name here is now "cpr0_(fuse_name)" instead of "cpr_(fuse_name)": luckily, QCS404 is the only user so change it accordingly. Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790ba585d..f9350b028435 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1168,19 +1168,19 @@ cpr: power-controller@b018000 { <&cpr_efuse_ring2>, <&cpr_efuse_ring3>, <&cpr_efuse_revision>; - nvmem-cell-names = "cpr_quotient_offset1", - "cpr_quotient_offset2", - "cpr_quotient_offset3", - "cpr_init_voltage1", - "cpr_init_voltage2", - "cpr_init_voltage3", - "cpr_quotient1", - "cpr_quotient2", - "cpr_quotient3", - "cpr_ring_osc1", - "cpr_ring_osc2", - "cpr_ring_osc3", - "cpr_fuse_revision"; + nvmem-cell-names = "cpr0_quotient_offset1", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_fuse_revision"; }; timer@b120000 {