From patchwork Tue Nov 27 16:52:14 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700843 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A21B214BD for ; Tue, 27 Nov 2018 16:53:24 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 8F0622C308 for ; Tue, 27 Nov 2018 16:53:24 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 8CBFD2C303; Tue, 27 Nov 2018 16:53:24 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id F001F2C2D2 for ; Tue, 27 Nov 2018 16:53:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729507AbeK1Dvr convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:47 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:63251 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726492AbeK1DvP (ORCPT ); Tue, 27 Nov 2018 22:51:15 -0500 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmkSH013996; Tue, 27 Nov 2018 17:52:15 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw9x1dk8-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:15 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 3ABF4353; Tue, 27 Nov 2018 17:51:47 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node3.st.com [10.75.127.18]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id DCFC2533F; Tue, 27 Nov 2018 16:52:14 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE3.st.com (10.75.127.18) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:14 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:14 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 1/8] dt-bindings: mfd: document stpmic1 Thread-Topic: [PATCH v6 1/8] dt-bindings: mfd: document stpmic1 Thread-Index: AQHUhnGMf/l0g7QUAE+jxET/KlSvqA== Date: Tue, 27 Nov 2018 16:52:14 +0000 Message-ID: <1543337529-22301-2-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet Reviewed-by: Rob Herring Acked-for-MFD-by: Lee Jones --- changes in v6: * fix commit message .../devicetree/bindings/mfd/st,stpmic1.txt | 61 ++++++++++++++++++++++ include/dt-bindings/mfd/st,stpmic1.h | 50 ++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt create mode 100644 include/dt-bindings/mfd/st,stpmic1.h diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt new file mode 100644 index 0000000..afd45c0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt @@ -0,0 +1,61 @@ +* STMicroelectronics STPMIC1 Power Management IC + +Required properties: +- compatible: : "st,stpmic1" +- reg: : The I2C slave address for the STPMIC1 chip. +- interrupts: : The interrupt line the device is connected to. +- #interrupt-cells: : Should be 1. +- interrupt-controller: : Marks the device node as an interrupt controller. + Interrupt numbers are defined at + dt-bindings/mfd/st,stpmic1.h. + +STPMIC1 consists in a varied group of sub-devices. +Each sub-device binding is be described in own documentation file. + +Device Description +------ ------------ +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt + +Example: + +#include + +pmic: pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + }; diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h new file mode 100644 index 0000000..321cd087 --- /dev/null +++ b/include/dt-bindings/mfd/st,stpmic1.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard , + * Pascal Paillet for STMicroelectronics. + */ + +#ifndef __DT_BINDINGS_STPMIC1_H__ +#define __DT_BINDINGS_STPMIC1_H__ + +/* IRQ definitions */ +#define IT_PONKEY_F 0 +#define IT_PONKEY_R 1 +#define IT_WAKEUP_F 2 +#define IT_WAKEUP_R 3 +#define IT_VBUS_OTG_F 4 +#define IT_VBUS_OTG_R 5 +#define IT_SWOUT_F 6 +#define IT_SWOUT_R 7 + +#define IT_CURLIM_BUCK1 8 +#define IT_CURLIM_BUCK2 9 +#define IT_CURLIM_BUCK3 10 +#define IT_CURLIM_BUCK4 11 +#define IT_OCP_OTG 12 +#define IT_OCP_SWOUT 13 +#define IT_OCP_BOOST 14 +#define IT_OVP_BOOST 15 + +#define IT_CURLIM_LDO1 16 +#define IT_CURLIM_LDO2 17 +#define IT_CURLIM_LDO3 18 +#define IT_CURLIM_LDO4 19 +#define IT_CURLIM_LDO5 20 +#define IT_CURLIM_LDO6 21 +#define IT_SHORT_SWOTG 22 +#define IT_SHORT_SWOUT 23 + +#define IT_TWARN_F 24 +#define IT_TWARN_R 25 +#define IT_VINLOW_F 26 +#define IT_VINLOW_R 27 +#define IT_SWIN_F 30 +#define IT_SWIN_R 31 + +/* BUCK MODES definitions */ +#define STPMIC1_BUCK_MODE_NORMAL 0 +#define STPMIC1_BUCK_MODE_LP 2 + +#endif /* __DT_BINDINGS_STPMIC1_H__ */ From patchwork Tue Nov 27 16:52:14 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700845 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 376B414BD for ; Tue, 27 Nov 2018 16:53:26 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 25C602C326 for ; Tue, 27 Nov 2018 16:53:26 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 23C662C308; Tue, 27 Nov 2018 16:53:26 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id B95352C3E7 for ; Tue, 27 Nov 2018 16:53:24 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731575AbeK1Dvx convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:53 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:5649 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729727AbeK1DvP (ORCPT ); Tue, 27 Nov 2018 22:51:15 -0500 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmkVY014002; Tue, 27 Nov 2018 17:52:16 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw9x1dkc-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:16 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id A2DE2383; Tue, 27 Nov 2018 17:51:47 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node2.st.com [10.75.127.17]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 56B3B533F; Tue, 27 Nov 2018 16:52:15 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE2.st.com (10.75.127.17) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:15 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:15 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver Thread-Topic: [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver Thread-Index: AQHUhnGMe+GJA41hxEW0/vURul2iAQ== Date: Tue, 27 Nov 2018 16:52:14 +0000 Message-ID: <1543337529-22301-3-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet --- changes in v6: * replace i2c_device_id by of_device_id * fix commit message and Kconfig description drivers/mfd/Kconfig | 16 ++++ drivers/mfd/Makefile | 1 + drivers/mfd/stpmic1.c | 213 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 442 insertions(+) create mode 100644 drivers/mfd/stpmic1.c create mode 100644 include/linux/mfd/stpmic1.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11841f4..0677bac 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1855,6 +1855,22 @@ config MFD_STM32_TIMERS for PWM and IIO Timer. This driver allow to share the registers between the others drivers. +config MFD_STPMIC1 + tristate "Support for STPMIC1 PMIC" + depends on (I2C=y && OF) + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on + key, watchdog and regulator functionalities which are supported via + the relevant subsystems. This driver provides core support for the + STPMIC1. In order to use the actual functionaltiy of the device other + drivers must be enabled. + + To compile this driver as a module, choose M here: the + module will be called stpmic1. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5856a94..76fff14 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -232,6 +232,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o +obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c new file mode 100644 index 0000000..7dfbe89 --- /dev/null +++ b/drivers/mfd/stpmic1.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define STPMIC1_MAIN_IRQ 0 + +static const struct regmap_range stpmic1_readable_ranges[] = { + regmap_reg_range(TURN_ON_SR, VERSION_SR), + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(BST_SW_CR, BST_SW_CR), + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4), + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), + regmap_reg_range(INT_MASK_R1, INT_MASK_R4), + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4), + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4), + regmap_reg_range(INT_SRC_R1, INT_SRC_R1), +}; + +static const struct regmap_range stpmic1_writeable_ranges[] = { + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(BST_SW_CR, BST_SW_CR), + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4), + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4), +}; + +static const struct regmap_range stpmic1_volatile_ranges[] = { + regmap_reg_range(TURN_ON_SR, VERSION_SR), + regmap_reg_range(WCHDG_CR, WCHDG_CR), + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4), + regmap_reg_range(INT_SRC_R1, INT_SRC_R4), +}; + +static const struct regmap_access_table stpmic1_readable_table = { + .yes_ranges = stpmic1_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges), +}; + +static const struct regmap_access_table stpmic1_writeable_table = { + .yes_ranges = stpmic1_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges), +}; + +static const struct regmap_access_table stpmic1_volatile_table = { + .yes_ranges = stpmic1_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges), +}; + +const struct regmap_config stpmic1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = PMIC_MAX_REGISTER_ADDRESS, + .rd_table = &stpmic1_readable_table, + .wr_table = &stpmic1_writeable_table, + .volatile_table = &stpmic1_volatile_table, +}; + +static const struct regmap_irq stpmic1_irqs[] = { + REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01), + REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02), + REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04), + REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08), + REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10), + REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20), + REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40), + REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80), + + REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01), + REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02), + REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04), + REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08), + REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10), + REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20), + REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40), + REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80), + + REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01), + REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02), + REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04), + REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08), + REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10), + REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20), + REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40), + REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80), + + REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01), + REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02), + REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04), + REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08), + REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40), + REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80), +}; + +static const struct regmap_irq_chip stpmic1_regmap_irq_chip = { + .name = "pmic_irq", + .status_base = INT_PENDING_R1, + .mask_base = INT_CLEAR_MASK_R1, + .unmask_base = INT_SET_MASK_R1, + .ack_base = INT_CLEAR_R1, + .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS, + .irqs = stpmic1_irqs, + .num_irqs = ARRAY_SIZE(stpmic1_irqs), +}; + +static int stpmic1_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct stpmic1 *ddata; + struct device *dev = &i2c->dev; + int ret; + struct device_node *np = dev->of_node; + u32 reg; + + ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + i2c_set_clientdata(i2c, ddata); + ddata->dev = dev; + + ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ); + if (ddata->irq < 0) { + dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq); + return ddata->irq; + } + + ret = regmap_read(ddata->regmap, VERSION_SR, ®); + if (ret) { + dev_err(dev, "Unable to read PMIC version\n"); + return ret; + } + dev_info(dev, "PMIC Chip Version: 0x%x\n", reg); + + /* Initialize PMIC IRQ Chip & associated IRQ domains */ + ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq, + IRQF_ONESHOT | IRQF_SHARED, + 0, &stpmic1_regmap_irq_chip, + &ddata->irq_data); + if (ret) { + dev_err(dev, "IRQ Chip registration failed: %d\n", ret); + return ret; + } + + return devm_of_platform_populate(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int stpmic1_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + + disable_irq(pmic_dev->irq); + + return 0; +} + +static int stpmic1_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + int ret; + + ret = regcache_sync(pmic_dev->regmap); + if (ret) + return ret; + + enable_irq(pmic_dev->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume); + +static const struct of_device_id stpmic1_of_match[] = { + { .compatible = "st,stpmic1", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stpmic1_of_match); + +static struct i2c_driver stpmic1_driver = { + .driver = { + .name = "stpmic1", + .of_match_table = of_match_ptr(stpmic1_of_match), + .pm = &stpmic1_pm, + }, + .probe = stpmic1_probe, +}; + +module_i2c_driver(stpmic1_driver); + +MODULE_DESCRIPTION("STPMIC1 PMIC Driver"); +MODULE_AUTHOR("Pascal Paillet "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h new file mode 100644 index 0000000..fa3f99f --- /dev/null +++ b/include/linux/mfd/stpmic1.h @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard , + * Pascal Paillet for STMicroelectronics. + */ + +#ifndef __LINUX_MFD_STPMIC1_H +#define __LINUX_MFD_STPMIC1_H + +#define TURN_ON_SR 0x1 +#define TURN_OFF_SR 0x2 +#define ICC_LDO_TURN_OFF_SR 0x3 +#define ICC_BUCK_TURN_OFF_SR 0x4 +#define RREQ_STATE_SR 0x5 +#define VERSION_SR 0x6 + +#define SWOFF_PWRCTRL_CR 0x10 +#define PADS_PULL_CR 0x11 +#define BUCKS_PD_CR 0x12 +#define LDO14_PD_CR 0x13 +#define LDO56_VREF_PD_CR 0x14 +#define VBUS_DET_VIN_CR 0x15 +#define PKEY_TURNOFF_CR 0x16 +#define BUCKS_MASK_RANK_CR 0x17 +#define BUCKS_MASK_RESET_CR 0x18 +#define LDOS_MASK_RANK_CR 0x19 +#define LDOS_MASK_RESET_CR 0x1A +#define WCHDG_CR 0x1B +#define WCHDG_TIMER_CR 0x1C +#define BUCKS_ICCTO_CR 0x1D +#define LDOS_ICCTO_CR 0x1E + +#define BUCK1_ACTIVE_CR 0x20 +#define BUCK2_ACTIVE_CR 0x21 +#define BUCK3_ACTIVE_CR 0x22 +#define BUCK4_ACTIVE_CR 0x23 +#define VREF_DDR_ACTIVE_CR 0x24 +#define LDO1_ACTIVE_CR 0x25 +#define LDO2_ACTIVE_CR 0x26 +#define LDO3_ACTIVE_CR 0x27 +#define LDO4_ACTIVE_CR 0x28 +#define LDO5_ACTIVE_CR 0x29 +#define LDO6_ACTIVE_CR 0x2A + +#define BUCK1_STDBY_CR 0x30 +#define BUCK2_STDBY_CR 0x31 +#define BUCK3_STDBY_CR 0x32 +#define BUCK4_STDBY_CR 0x33 +#define VREF_DDR_STDBY_CR 0x34 +#define LDO1_STDBY_CR 0x35 +#define LDO2_STDBY_CR 0x36 +#define LDO3_STDBY_CR 0x37 +#define LDO4_STDBY_CR 0x38 +#define LDO5_STDBY_CR 0x39 +#define LDO6_STDBY_CR 0x3A + +#define BST_SW_CR 0x40 + +#define INT_PENDING_R1 0x50 +#define INT_PENDING_R2 0x51 +#define INT_PENDING_R3 0x52 +#define INT_PENDING_R4 0x53 + +#define INT_DBG_LATCH_R1 0x60 +#define INT_DBG_LATCH_R2 0x61 +#define INT_DBG_LATCH_R3 0x62 +#define INT_DBG_LATCH_R4 0x63 + +#define INT_CLEAR_R1 0x70 +#define INT_CLEAR_R2 0x71 +#define INT_CLEAR_R3 0x72 +#define INT_CLEAR_R4 0x73 + +#define INT_MASK_R1 0x80 +#define INT_MASK_R2 0x81 +#define INT_MASK_R3 0x82 +#define INT_MASK_R4 0x83 + +#define INT_SET_MASK_R1 0x90 +#define INT_SET_MASK_R2 0x91 +#define INT_SET_MASK_R3 0x92 +#define INT_SET_MASK_R4 0x93 + +#define INT_CLEAR_MASK_R1 0xA0 +#define INT_CLEAR_MASK_R2 0xA1 +#define INT_CLEAR_MASK_R3 0xA2 +#define INT_CLEAR_MASK_R4 0xA3 + +#define INT_SRC_R1 0xB0 +#define INT_SRC_R2 0xB1 +#define INT_SRC_R3 0xB2 +#define INT_SRC_R4 0xB3 + +#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4 + +#define STPMIC1_PMIC_NUM_IRQ_REGS 4 + +#define TURN_OFF_SR_ICC_EVENT 0x08 + +#define LDO_VOLTAGE_MASK GENMASK(6, 2) +#define BUCK_VOLTAGE_MASK GENMASK(7, 2) +#define LDO_BUCK_VOLTAGE_SHIFT 2 + +#define LDO_ENABLE_MASK BIT(0) +#define BUCK_ENABLE_MASK BIT(0) + +#define BUCK_HPLP_ENABLE_MASK BIT(1) +#define BUCK_HPLP_SHIFT 1 + +#define STDBY_ENABLE_MASK BIT(0) + +#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0) +#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0) +#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0) +#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0) +#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0) +#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0) +#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0) + +#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK1_PULL_DOWN_MASK BIT(0) +#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK2_PULL_DOWN_MASK BIT(2) +#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK3_PULL_DOWN_MASK BIT(4) +#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK4_PULL_DOWN_MASK BIT(6) + +#define LDO1_PULL_DOWN_REG LDO14_PD_CR +#define LDO1_PULL_DOWN_MASK BIT(0) +#define LDO2_PULL_DOWN_REG LDO14_PD_CR +#define LDO2_PULL_DOWN_MASK BIT(2) +#define LDO3_PULL_DOWN_REG LDO14_PD_CR +#define LDO3_PULL_DOWN_MASK BIT(4) +#define LDO4_PULL_DOWN_REG LDO14_PD_CR +#define LDO4_PULL_DOWN_MASK BIT(6) +#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO5_PULL_DOWN_MASK BIT(0) +#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO6_PULL_DOWN_MASK BIT(2) +#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR +#define VREF_DDR_PULL_DOWN_MASK BIT(4) + +#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0) +#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0) + +#define LDO_BYPASS_MASK BIT(7) + +/* Main PMIC Control Register + * SWOFF_PWRCTRL_CR + * Address : 0x10 + */ +#define ICC_EVENT_ENABLED BIT(4) +#define PWRCTRL_POLARITY_HIGH BIT(3) +#define PWRCTRL_PIN_VALID BIT(2) +#define RESTART_REQUEST_ENABLED BIT(1) +#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0) + +/* Main PMIC PADS Control Register + * PADS_PULL_CR + * Address : 0x11 + */ +#define WAKEUP_DETECTOR_DISABLED BIT(4) +#define PWRCTRL_PD_ACTIVE BIT(3) +#define PWRCTRL_PU_ACTIVE BIT(2) +#define WAKEUP_PD_ACTIVE BIT(1) +#define PONKEY_PU_INACTIVE BIT(0) + +/* Main PMIC VINLOW Control Register + * VBUS_DET_VIN_CRC DMSC + * Address : 0x15 + */ +#define SWIN_DETECTOR_ENABLED BIT(7) +#define SWOUT_DETECTOR_ENABLED BIT(6) +#define VINLOW_ENABLED BIT(0) +#define VINLOW_CTRL_REG_MASK GENMASK(7, 0) + +/* USB Control Register + * Address : 0x40 + */ +#define BOOST_OVP_DISABLED BIT(7) +#define VBUS_OTG_DETECTION_DISABLED BIT(6) +#define SW_OUT_DISCHARGE BIT(5) +#define VBUS_OTG_DISCHARGE BIT(4) +#define OCP_LIMIT_HIGH BIT(3) +#define SWIN_SWOUT_ENABLED BIT(2) +#define USBSW_OTG_SWITCH_ENABLED BIT(1) +#define BOOST_ENABLED BIT(0) + +/* PKEY_TURNOFF_CR + * Address : 0x16 + */ +#define PONKEY_PWR_OFF BIT(7) +#define PONKEY_CC_FLAG_CLEAR BIT(6) +#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0) +#define PONKEY_TURNOFF_MASK GENMASK(7, 0) + +/* + * struct stpmic1 - stpmic1 master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @irq: main IRQ number + * @regmap_irq_chip_data: irq chip data + */ +struct stpmic1 { + struct device *dev; + struct regmap *regmap; + int irq; + struct regmap_irq_chip_data *irq_data; +}; + +#endif /* __LINUX_MFD_STPMIC1_H */ From patchwork Tue Nov 27 16:52:15 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700865 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9477D14BD for ; Tue, 27 Nov 2018 16:53:52 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 84B622B6CF for ; Tue, 27 Nov 2018 16:53:52 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 78F032BB77; Tue, 27 Nov 2018 16:53:52 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 084D12B6CF for ; Tue, 27 Nov 2018 16:53:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731254AbeK1DvN convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:13 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:63810 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726492AbeK1DvN (ORCPT ); Tue, 27 Nov 2018 22:51:13 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmpV9029029; Tue, 27 Nov 2018 17:52:16 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw02hg0r-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:16 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 05EDC34A; Tue, 27 Nov 2018 17:51:48 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node3.st.com [10.75.127.18]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id BB2C2533F; Tue, 27 Nov 2018 16:52:15 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE3.st.com (10.75.127.18) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:15 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:15 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators Thread-Topic: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators Thread-Index: AQHUhnGMXziu4rqWSUmQ9+/ALvBZeg== Date: Tue, 27 Nov 2018 16:52:15 +0000 Message-ID: <1543337529-22301-4-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The STPMIC1 regulators supply power to the application processor as well as to the external system peripherals such as DDR, Flash memories and system devices. Signed-off-by: Pascal Paillet Reviewed-by: Rob Herring --- changes in v6: * remove interrupt parent .../bindings/regulator/st,stpmic1-regulator.txt | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt new file mode 100644 index 0000000..5adc938 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -0,0 +1,66 @@ +STMicroelectronics STPMIC1 Voltage regulators + +Regulator Nodes are optional depending on needs. + +Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + +Switches are fixed voltage regulators with only enable/disable capability. + +Optional properties: +- st,mask-reset: mask reset for this regulator: the regulator configuration + is maintained during pmic reset. +- regulator-pull-down: enable high pull down + if not specified light pull down is used +- regulator-over-current-protection: + if set, all regulators are switched off in case of over-current detection + on this regulator, + if not set, the driver only sends an over-current event. +- interrupts: index of current limit detection interrupt +- -supply: phandle to the parent supply/regulator node + each regulator supply can be described except vref_ddr. +- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. + +Example: +regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + interrupts = ; + st,mask-reset; + regulator-pull-down; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + interrupts = ; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; +}; From patchwork Tue Nov 27 16:52:15 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700835 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id F0007109C for ; Tue, 27 Nov 2018 16:53:03 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D49F42C33B for ; Tue, 27 Nov 2018 16:53:03 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id D135C2C3AA; Tue, 27 Nov 2018 16:53:03 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7B3B62C37A for ; Tue, 27 Nov 2018 16:53:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731485AbeK1DvZ convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:25 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:8490 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731490AbeK1DvY (ORCPT ); Tue, 27 Nov 2018 22:51:24 -0500 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmn6k014015; Tue, 27 Nov 2018 17:52:17 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw9x1dkf-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:17 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id B8A3033C; Tue, 27 Nov 2018 17:51:48 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node1.st.com [10.75.127.16]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 5B591533F; Tue, 27 Nov 2018 16:52:16 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE1.st.com (10.75.127.16) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:15 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:16 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 4/8] regulator: stpmic1: add stpmic1 regulator driver Thread-Topic: [PATCH v6 4/8] regulator: stpmic1: add stpmic1 regulator driver Thread-Index: AQHUhnGNWSZrT/J9SkyT5WGS9KR6aw== Date: Tue, 27 Nov 2018 16:52:15 +0000 Message-ID: <1543337529-22301-5-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The stpmic1 PMIC embeds several regulators and switches with different capabilities. Signed-off-by: Pascal Paillet --- changes in v6: nothing drivers/regulator/Kconfig | 12 + drivers/regulator/Makefile | 1 + drivers/regulator/stpmic1_regulator.c | 667 ++++++++++++++++++++++++++++++++++ 3 files changed, 680 insertions(+) create mode 100644 drivers/regulator/stpmic1_regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6e96ef1..026d480 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -803,6 +803,18 @@ config REGULATOR_STM32_VREFBUF This driver can also be built as a module. If so, the module will be called stm32-vrefbuf. +config REGULATOR_STPMIC1 + tristate "STMicroelectronics STPMIC1 PMIC Regulators" + depends on MFD_STPMIC1 + help + This driver supports STMicroelectronics STPMIC1 PMIC voltage + regulators and switches. The STPMIC1 regulators supply power to + an application processor as well as to external system + peripherals such as DDR, Flash memories and system devices. + + To compile this driver as a module, choose M here: the + module will be called stpmic1_regulator. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index eac4d79..300bc4c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o +obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c new file mode 100644 index 0000000..c96edcd --- /dev/null +++ b/drivers/regulator/stpmic1_regulator.c @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet for STMicroelectronics. + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/** + * stpmic1 regulator description + * @desc: regulator framework description + * @mask_reset_reg: mask reset register address + * @mask_reset_mask: mask rank and mask reset register mask + * @icc_reg: icc register address + * @icc_mask: icc register mask + */ +struct stpmic1_regulator_cfg { + struct regulator_desc desc; + u8 mask_reset_reg; + u8 mask_reset_mask; + u8 icc_reg; + u8 icc_mask; +}; + +/** + * stpmic1 regulator data: this structure is used as driver data + * @regul_id: regulator id + * @reg_node: DT node of regulator (unused on non-DT platforms) + * @cfg: stpmic specific regulator description + * @regmap: point to parent regmap structure + */ +struct stpmic1_regulator { + unsigned int regul_id; + struct device_node *reg_node; + struct stpmic1_regulator_cfg *cfg; + struct regmap *regmap; +}; + +static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode); +static unsigned int stpmic1_get_mode(struct regulator_dev *rdev); +static int stpmic1_set_icc(struct regulator_dev *rdev); +static unsigned int stpmic1_map_mode(unsigned int mode); + +enum { + STPMIC1_BUCK1 = 0, + STPMIC1_BUCK2 = 1, + STPMIC1_BUCK3 = 2, + STPMIC1_BUCK4 = 3, + STPMIC1_LDO1 = 4, + STPMIC1_LDO2 = 5, + STPMIC1_LDO3 = 6, + STPMIC1_LDO4 = 7, + STPMIC1_LDO5 = 8, + STPMIC1_LDO6 = 9, + STPMIC1_VREF_DDR = 10, + STPMIC1_BOOST = 11, + STPMIC1_VBUS_OTG = 12, + STPMIC1_SW_OUT = 13, +}; + +/* Enable time worst case is 5000mV/(2250uV/uS) */ +#define PMIC_ENABLE_TIME_US 2200 + +struct regulator_linear_range buck1_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 30, 25000), + REGULATOR_LINEAR_RANGE(1350000, 31, 63, 0), +}; + +struct regulator_linear_range buck2_ranges[] = { + REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), + REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), + REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), + REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0), + REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0), + REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0), + REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), + REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), + REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), + REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), + REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), +}; + +struct regulator_linear_range buck3_ranges[] = { + REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), + REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), + REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), + REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0), + REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0), + REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000), + REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), +}; + +struct regulator_linear_range buck4_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), + REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), + REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), + REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), + REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), + REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000), + REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), +}; + +struct regulator_linear_range ldo1_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), + REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), + REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), +}; + +struct regulator_linear_range ldo2_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), + REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), + REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), +}; + +struct regulator_linear_range ldo3_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), + REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), + REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), + /* with index 31 LDO3 is in DDR mode */ + REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), +}; + +struct regulator_linear_range ldo5_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), + REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), + REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), +}; + +struct regulator_linear_range ldo6_ranges[] = { + REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), + REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), +}; + +static struct regulator_ops stpmic1_ldo_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_pull_down = regulator_set_pull_down_regmap, + .set_over_current_protection = stpmic1_set_icc, +}; + +static struct regulator_ops stpmic1_ldo3_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_iterate, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_pull_down = regulator_set_pull_down_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, + .set_over_current_protection = stpmic1_set_icc, +}; + +static struct regulator_ops stpmic1_ldo4_fixed_regul_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .set_pull_down = regulator_set_pull_down_regmap, + .set_over_current_protection = stpmic1_set_icc, +}; + +static struct regulator_ops stpmic1_buck_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_pull_down = regulator_set_pull_down_regmap, + .set_mode = stpmic1_set_mode, + .get_mode = stpmic1_get_mode, + .set_over_current_protection = stpmic1_set_icc, +}; + +static struct regulator_ops stpmic1_vref_ddr_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .set_pull_down = regulator_set_pull_down_regmap, +}; + +static struct regulator_ops stpmic1_boost_regul_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .set_over_current_protection = stpmic1_set_icc, +}; + +static struct regulator_ops stpmic1_switch_regul_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .set_over_current_protection = stpmic1_set_icc, + .set_active_discharge = regulator_set_active_discharge_regmap, +}; + +#define REG_LDO(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 32, \ + .ops = &stpmic1_ldo_ops, \ + .linear_ranges = base ## _ranges, \ + .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = ids##_ACTIVE_CR, \ + .vsel_mask = LDO_VOLTAGE_MASK, \ + .enable_reg = ids##_ACTIVE_CR, \ + .enable_mask = LDO_ENABLE_MASK, \ + .enable_val = 1, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .pull_down_reg = ids##_PULL_DOWN_REG, \ + .pull_down_mask = ids##_PULL_DOWN_MASK, \ + .supply_name = #base, \ +} + +#define REG_LDO3(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 32, \ + .ops = &stpmic1_ldo3_ops, \ + .linear_ranges = ldo3_ranges, \ + .n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = LDO3_ACTIVE_CR, \ + .vsel_mask = LDO_VOLTAGE_MASK, \ + .enable_reg = LDO3_ACTIVE_CR, \ + .enable_mask = LDO_ENABLE_MASK, \ + .enable_val = 1, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .bypass_reg = LDO3_ACTIVE_CR, \ + .bypass_mask = LDO_BYPASS_MASK, \ + .bypass_val_on = LDO_BYPASS_MASK, \ + .bypass_val_off = 0, \ + .pull_down_reg = ids##_PULL_DOWN_REG, \ + .pull_down_mask = ids##_PULL_DOWN_MASK, \ + .supply_name = #base, \ +} + +#define REG_LDO4(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 1, \ + .ops = &stpmic1_ldo4_fixed_regul_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 3300000, \ + .fixed_uV = 3300000, \ + .enable_reg = LDO4_ACTIVE_CR, \ + .enable_mask = LDO_ENABLE_MASK, \ + .enable_val = 1, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .pull_down_reg = ids##_PULL_DOWN_REG, \ + .pull_down_mask = ids##_PULL_DOWN_MASK, \ + .supply_name = #base, \ +} + +#define REG_BUCK(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .ops = &stpmic1_buck_ops, \ + .n_voltages = 64, \ + .linear_ranges = base ## _ranges, \ + .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = ids##_ACTIVE_CR, \ + .vsel_mask = BUCK_VOLTAGE_MASK, \ + .enable_reg = ids##_ACTIVE_CR, \ + .enable_mask = BUCK_ENABLE_MASK, \ + .enable_val = 1, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .of_map_mode = stpmic1_map_mode, \ + .pull_down_reg = ids##_PULL_DOWN_REG, \ + .pull_down_mask = ids##_PULL_DOWN_MASK, \ + .supply_name = #base, \ +} + +#define REG_VREF_DDR(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 1, \ + .ops = &stpmic1_vref_ddr_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 500000, \ + .fixed_uV = 500000, \ + .enable_reg = VREF_DDR_ACTIVE_CR, \ + .enable_mask = BUCK_ENABLE_MASK, \ + .enable_val = 1, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .pull_down_reg = ids##_PULL_DOWN_REG, \ + .pull_down_mask = ids##_PULL_DOWN_MASK, \ + .supply_name = #base, \ +} + +#define REG_BOOST(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 1, \ + .ops = &stpmic1_boost_regul_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 0, \ + .fixed_uV = 5000000, \ + .enable_reg = BST_SW_CR, \ + .enable_mask = BOOST_ENABLED, \ + .enable_val = BOOST_ENABLED, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .supply_name = #base, \ +} + +#define REG_VBUS_OTG(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 1, \ + .ops = &stpmic1_switch_regul_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 0, \ + .fixed_uV = 5000000, \ + .enable_reg = BST_SW_CR, \ + .enable_mask = USBSW_OTG_SWITCH_ENABLED, \ + .enable_val = USBSW_OTG_SWITCH_ENABLED, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .supply_name = #base, \ + .active_discharge_reg = BST_SW_CR, \ + .active_discharge_mask = VBUS_OTG_DISCHARGE, \ + .active_discharge_on = VBUS_OTG_DISCHARGE, \ +} + +#define REG_SW_OUT(ids, base) { \ + .name = #ids, \ + .id = STPMIC1_##ids, \ + .n_voltages = 1, \ + .ops = &stpmic1_switch_regul_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 0, \ + .fixed_uV = 5000000, \ + .enable_reg = BST_SW_CR, \ + .enable_mask = SWIN_SWOUT_ENABLED, \ + .enable_val = SWIN_SWOUT_ENABLED, \ + .disable_val = 0, \ + .enable_time = PMIC_ENABLE_TIME_US, \ + .supply_name = #base, \ + .active_discharge_reg = BST_SW_CR, \ + .active_discharge_mask = SW_OUT_DISCHARGE, \ + .active_discharge_on = SW_OUT_DISCHARGE, \ +} + +struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = { + [STPMIC1_BUCK1] = { + .desc = REG_BUCK(BUCK1, buck1), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(0), + .mask_reset_reg = BUCKS_MASK_RESET_CR, + .mask_reset_mask = BIT(0), + }, + [STPMIC1_BUCK2] = { + .desc = REG_BUCK(BUCK2, buck2), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(1), + .mask_reset_reg = BUCKS_MASK_RESET_CR, + .mask_reset_mask = BIT(1), + }, + [STPMIC1_BUCK3] = { + .desc = REG_BUCK(BUCK3, buck3), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(2), + .mask_reset_reg = BUCKS_MASK_RESET_CR, + .mask_reset_mask = BIT(2), + }, + [STPMIC1_BUCK4] = { + .desc = REG_BUCK(BUCK4, buck4), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(3), + .mask_reset_reg = BUCKS_MASK_RESET_CR, + .mask_reset_mask = BIT(3), + }, + [STPMIC1_LDO1] = { + .desc = REG_LDO(LDO1, ldo1), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(0), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(0), + }, + [STPMIC1_LDO2] = { + .desc = REG_LDO(LDO2, ldo2), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(1), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(1), + }, + [STPMIC1_LDO3] = { + .desc = REG_LDO3(LDO3, ldo3), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(2), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(2), + }, + [STPMIC1_LDO4] = { + .desc = REG_LDO4(LDO4, ldo4), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(3), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(3), + }, + [STPMIC1_LDO5] = { + .desc = REG_LDO(LDO5, ldo5), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(4), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(4), + }, + [STPMIC1_LDO6] = { + .desc = REG_LDO(LDO6, ldo6), + .icc_reg = LDOS_ICCTO_CR, + .icc_mask = BIT(5), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(5), + }, + [STPMIC1_VREF_DDR] = { + .desc = REG_VREF_DDR(VREF_DDR, vref_ddr), + .mask_reset_reg = LDOS_MASK_RESET_CR, + .mask_reset_mask = BIT(6), + }, + [STPMIC1_BOOST] = { + .desc = REG_BOOST(BOOST, boost), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(6), + }, + [STPMIC1_VBUS_OTG] = { + .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(4), + }, + [STPMIC1_SW_OUT] = { + .desc = REG_SW_OUT(SW_OUT, pwr_sw2), + .icc_reg = BUCKS_ICCTO_CR, + .icc_mask = BIT(5), + }, +}; + +static unsigned int stpmic1_map_mode(unsigned int mode) +{ + switch (mode) { + case STPMIC1_BUCK_MODE_NORMAL: + return REGULATOR_MODE_NORMAL; + case STPMIC1_BUCK_MODE_LP: + return REGULATOR_MODE_STANDBY; + default: + return REGULATOR_MODE_INVALID; + } +} + +static unsigned int stpmic1_get_mode(struct regulator_dev *rdev) +{ + int value; + + regmap_read(rdev->regmap, rdev->desc->enable_reg, &value); + + if (value & STPMIC1_BUCK_MODE_LP) + return REGULATOR_MODE_STANDBY; + + return REGULATOR_MODE_NORMAL; +} + +static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int value; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + value = STPMIC1_BUCK_MODE_NORMAL; + break; + case REGULATOR_MODE_STANDBY: + value = STPMIC1_BUCK_MODE_LP; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + STPMIC1_BUCK_MODE_LP, value); +} + +static int stpmic1_set_icc(struct regulator_dev *rdev) +{ + struct stpmic1_regulator *regul = rdev_get_drvdata(rdev); + + /* enable switch off in case of over current */ + return regmap_update_bits(regul->regmap, regul->cfg->icc_reg, + regul->cfg->icc_mask, regul->cfg->icc_mask); +} + +static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data) +{ + struct regulator_dev *rdev = (struct regulator_dev *)data; + + mutex_lock(&rdev->mutex); + + /* Send an overcurrent notification */ + regulator_notifier_call_chain(rdev, + REGULATOR_EVENT_OVER_CURRENT, + NULL); + + mutex_unlock(&rdev->mutex); + + return IRQ_HANDLED; +} + +#define MATCH(_name, _id) \ + [STPMIC1_##_id] = { \ + .name = #_name, \ + .desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \ + } + +static struct of_regulator_match stpmic1_matches[] = { + MATCH(buck1, BUCK1), + MATCH(buck2, BUCK2), + MATCH(buck3, BUCK3), + MATCH(buck4, BUCK4), + MATCH(ldo1, LDO1), + MATCH(ldo2, LDO2), + MATCH(ldo3, LDO3), + MATCH(ldo4, LDO4), + MATCH(ldo5, LDO5), + MATCH(ldo6, LDO6), + MATCH(vref_ddr, VREF_DDR), + MATCH(boost, BOOST), + MATCH(pwr_sw1, VBUS_OTG), + MATCH(pwr_sw2, SW_OUT), +}; + +static int stpmic1_regulator_register(struct platform_device *pdev, int id, + struct of_regulator_match *match, + struct stpmic1_regulator *regul) +{ + struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent); + struct regulator_dev *rdev; + struct regulator_config config = {}; + int ret = 0; + int irq; + + config.dev = &pdev->dev; + config.init_data = match->init_data; + config.of_node = match->of_node; + config.regmap = pmic_dev->regmap; + config.driver_data = regul; + + regul->regul_id = id; + regul->reg_node = config.of_node; + regul->cfg = &stpmic1_regulator_cfgs[id]; + regul->regmap = pmic_dev->regmap; + + rdev = devm_regulator_register(&pdev->dev, ®ul->cfg->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s regulator\n", + regul->cfg->desc.name); + return PTR_ERR(rdev); + } + + /* set mask reset */ + if (of_get_property(regul->reg_node, "st,mask-reset", NULL) && + regul->cfg->mask_reset_reg != 0) { + ret = regmap_update_bits(regul->regmap, + regul->cfg->mask_reset_reg, + regul->cfg->mask_reset_mask, + regul->cfg->mask_reset_mask); + if (ret) { + dev_err(&pdev->dev, "set mask reset failed\n"); + return ret; + } + } + + /* setup an irq handler for over-current detection */ + irq = of_irq_get(regul->reg_node, 0); + if (irq > 0) { + ret = devm_request_threaded_irq(&pdev->dev, + irq, NULL, + stpmic1_curlim_irq_handler, + IRQF_ONESHOT | IRQF_SHARED, + pdev->name, rdev); + if (ret) { + dev_err(&pdev->dev, "Request IRQ failed\n"); + return ret; + } + } + return 0; +} + +static int stpmic1_regulator_probe(struct platform_device *pdev) +{ + struct stpmic1_regulator *regul; + int i, ret; + + ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches, + ARRAY_SIZE(stpmic1_matches)); + if (ret < 0) { + dev_err(&pdev->dev, + "Error in PMIC regulator device tree node"); + return ret; + } + + regul = devm_kzalloc(&pdev->dev, ARRAY_SIZE(stpmic1_regulator_cfgs) * + sizeof(struct stpmic1_regulator), + GFP_KERNEL); + if (!regul) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) { + ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i], + regul); + if (ret < 0) + return ret; + regul++; + } + + dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n"); + + return 0; +} + +static const struct of_device_id of_pmic_regulator_match[] = { + { .compatible = "st,stpmic1-regulators" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, of_pmic_regulator_match); + +static struct platform_driver stpmic1_regulator_driver = { + .driver = { + .name = "stpmic1-regulator", + .of_match_table = of_match_ptr(of_pmic_regulator_match), + }, + .probe = stpmic1_regulator_probe, +}; + +module_platform_driver(stpmic1_regulator_driver); + +MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver"); +MODULE_AUTHOR("Pascal Paillet "); +MODULE_LICENSE("GPL v2"); From patchwork Tue Nov 27 16:52:16 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700833 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4C618109C for ; Tue, 27 Nov 2018 16:52:49 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 3BEA52C2E6 for ; Tue, 27 Nov 2018 16:52:49 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 39ECF2C331; Tue, 27 Nov 2018 16:52:49 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id BA4D52C3AC for ; Tue, 27 Nov 2018 16:52:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731483AbeK1DvQ convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:16 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:43499 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731419AbeK1DvP (ORCPT ); Tue, 27 Nov 2018 22:51:15 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmpVA029029; Tue, 27 Nov 2018 17:52:17 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw02hg0t-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:17 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 04F04353; Tue, 27 Nov 2018 17:51:48 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node2.st.com [10.75.127.17]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id AF6C25340; Tue, 27 Nov 2018 16:52:16 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE2.st.com (10.75.127.17) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:16 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:16 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 5/8] dt-bindings: input: document stpmic1 pmic onkey Thread-Topic: [PATCH v6 5/8] dt-bindings: input: document stpmic1 pmic onkey Thread-Index: AQHUhnGNict2cWlKfU6PSCQfboX0hg== Date: Tue, 27 Nov 2018 16:52:16 +0000 Message-ID: <1543337529-22301-6-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The stpmic1 pmic is able to manage an onkey button. It can be configured to shut-down the power supplies on a long key-press with an adjustable duration. Signed-off-by: Pascal Paillet Reviewed-by: Rob Herring --- changes in v6: nothing .../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt new file mode 100644 index 0000000..4494613 --- /dev/null +++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt @@ -0,0 +1,28 @@ +STMicroelectronics STPMIC1 Onkey + +Required properties: + +- compatible = "st,stpmic1-onkey"; +- interrupts: interrupt line to use +- interrupt-names = "onkey-falling", "onkey-rising" + onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic + onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic + +Optional properties: + +- st,onkey-clear-cc-flag: onkey is able power on after an + over-current shutdown event. +- st,onkey-pu-inactive: onkey pull up is not active +- power-off-time-sec: Duration in seconds which the key should be kept + pressed for device to power off automatically (from 1 to 16 seconds). + see See Documentation/devicetree/bindings/input/keys.txt + +Example: + +onkey { + compatible = "st,stpmic1-onkey"; + interrupt-parent = <&pmic>; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; +}; From patchwork Tue Nov 27 16:52:16 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700839 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2078B14BD for ; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0C2EC2C3CA for ; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 08E012C3A2; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 465522C3C1 for ; Tue, 27 Nov 2018 16:53:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731486AbeK1DvV convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:21 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:10591 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731419AbeK1DvU (ORCPT ); Tue, 27 Nov 2018 22:51:20 -0500 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmkSI013996; Tue, 27 Nov 2018 17:52:18 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw9x1dkh-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:18 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 9155034A; Tue, 27 Nov 2018 17:51:49 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node2.st.com [10.75.127.17]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 4B5A4533F; Tue, 27 Nov 2018 16:52:17 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE2.st.com (10.75.127.17) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:16 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:16 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 6/8] input: stpmic1: add stpmic1 onkey driver Thread-Topic: [PATCH v6 6/8] input: stpmic1: add stpmic1 onkey driver Thread-Index: AQHUhnGNx9xapEwxb0OS+O1uY2ETDQ== Date: Tue, 27 Nov 2018 16:52:16 +0000 Message-ID: <1543337529-22301-7-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The stpmic1 pmic is able to manage an onkey button. This driver exposes the stpmic1 onkey as an input device. It can also be configured to shut-down the power supplies on a long key-press with an adjustable duration. Signed-off-by: Pascal Paillet Acked-by: Dmitry Torokhov --- changes in v6: nothing drivers/input/misc/Kconfig | 11 +++ drivers/input/misc/Makefile | 2 + drivers/input/misc/stpmic1_onkey.c | 198 +++++++++++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+) create mode 100644 drivers/input/misc/stpmic1_onkey.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index ca59a2b..279fb02 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA To compile this driver as a module, choose M here. The module will be called sc27xx_vibra. +config INPUT_STPMIC1_ONKEY + tristate "STPMIC1 PMIC Onkey support" + depends on MFD_STPMIC1 + help + Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey + can be used to wakeup from low power modes and force a shut-down on + long press. + + To compile this driver as a module, choose M here: the + module will be called stpmic1_onkey. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 9d0f9d1..1b44202 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o +obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o @@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o + diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c new file mode 100644 index 0000000..7b49c99 --- /dev/null +++ b/drivers/input/misc/stpmic1_onkey.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet for STMicroelectronics. + +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * struct stpmic1_onkey - OnKey data + * @input_dev: pointer to input device + * @irq_falling: irq that we are hooked on to + * @irq_rising: irq that we are hooked on to + */ +struct stpmic1_onkey { + struct input_dev *input_dev; + int irq_falling; + int irq_rising; +}; + +static irqreturn_t onkey_falling_irq(int irq, void *ponkey) +{ + struct stpmic1_onkey *onkey = ponkey; + struct input_dev *input_dev = onkey->input_dev; + + input_report_key(input_dev, KEY_POWER, 1); + pm_wakeup_event(input_dev->dev.parent, 0); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static irqreturn_t onkey_rising_irq(int irq, void *ponkey) +{ + struct stpmic1_onkey *onkey = ponkey; + struct input_dev *input_dev = onkey->input_dev; + + input_report_key(input_dev, KEY_POWER, 0); + pm_wakeup_event(input_dev->dev.parent, 0); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static int stpmic1_onkey_probe(struct platform_device *pdev) +{ + struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct input_dev *input_dev; + struct stpmic1_onkey *onkey; + unsigned int val, reg = 0; + int error; + + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling"); + if (onkey->irq_falling < 0) { + dev_err(dev, "failed: request IRQ onkey-falling %d\n", + onkey->irq_falling); + return onkey->irq_falling; + } + + onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising"); + if (onkey->irq_rising < 0) { + dev_err(dev, "failed: request IRQ onkey-rising %d\n", + onkey->irq_rising); + return onkey->irq_rising; + } + + if (!device_property_read_u32(dev, "power-off-time-sec", &val)) { + if (val > 0 && val <= 16) { + dev_dbg(dev, "power-off-time=%d seconds\n", val); + reg |= PONKEY_PWR_OFF; + reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK); + } else { + dev_err(dev, "power-off-time-sec out of range\n"); + return -EINVAL; + } + } + + if (device_property_present(dev, "st,onkey-clear-cc-flag")) + reg |= PONKEY_CC_FLAG_CLEAR; + + error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR, + PONKEY_TURNOFF_MASK, reg); + if (error) { + dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error); + return error; + } + + if (device_property_present(dev, "st,onkey-pu-inactive")) { + error = regmap_update_bits(pmic->regmap, PADS_PULL_CR, + PONKEY_PU_INACTIVE, + PONKEY_PU_INACTIVE); + if (error) { + dev_err(dev, "ONKEY Pads configuration failed: %d\n", + error); + return error; + } + } + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "Can't allocate Pwr Onkey Input Device\n"); + return -ENOMEM; + } + + input_dev->name = "pmic_onkey"; + input_dev->phys = "pmic_onkey/input0"; + + input_set_capability(input_dev, EV_KEY, KEY_POWER); + + onkey->input_dev = input_dev; + + /* interrupt is nested in a thread */ + error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL, + onkey_falling_irq, IRQF_ONESHOT, + dev_name(dev), onkey); + if (error) { + dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL, + onkey_rising_irq, IRQF_ONESHOT, + dev_name(dev), onkey); + if (error) { + dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Can't register power button: %d\n", error); + return error; + } + + platform_set_drvdata(pdev, onkey); + device_init_wakeup(dev, true); + + return 0; +} + +static int __maybe_unused stpmic1_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) { + enable_irq_wake(onkey->irq_falling); + enable_irq_wake(onkey->irq_rising); + } + return 0; +} + +static int __maybe_unused stpmic1_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) { + disable_irq_wake(onkey->irq_falling); + disable_irq_wake(onkey->irq_rising); + } + return 0; +} + +static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm, + stpmic1_onkey_suspend, + stpmic1_onkey_resume); + +static const struct of_device_id of_stpmic1_onkey_match[] = { + { .compatible = "st,stpmic1-onkey" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match); + +static struct platform_driver stpmic1_onkey_driver = { + .probe = stpmic1_onkey_probe, + .driver = { + .name = "stpmic1_onkey", + .of_match_table = of_match_ptr(of_stpmic1_onkey_match), + .pm = &stpmic1_onkey_pm, + }, +}; +module_platform_driver(stpmic1_onkey_driver); + +MODULE_DESCRIPTION("Onkey driver for STPMIC1"); +MODULE_AUTHOR("Pascal Paillet "); +MODULE_LICENSE("GPL v2"); From patchwork Tue Nov 27 16:52:17 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700841 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EB4EF109C for ; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D99EA2C3C6 for ; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id CDAEA2C3BD; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.3 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI,URIBL_SBL autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7DF7C2C39A for ; Tue, 27 Nov 2018 16:53:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731547AbeK1Dvi convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:38 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:59631 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731484AbeK1DvV (ORCPT ); Tue, 27 Nov 2018 22:51:21 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmrjW029059; Tue, 27 Nov 2018 17:52:18 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw02hg0u-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:18 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 05F7833C; Tue, 27 Nov 2018 17:51:50 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node3.st.com [10.75.127.18]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id AD23B533F; Tue, 27 Nov 2018 16:52:17 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE3.st.com (10.75.127.18) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:17 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:17 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog Thread-Topic: [PATCH v6 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog Thread-Index: AQHUhnGOUS9VHPjeJ0S/nbFcuyiRtQ== Date: Tue, 27 Nov 2018 16:52:17 +0000 Message-ID: <1543337529-22301-8-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The stpmic1 PMIC embeds a watchdog which is disabled by default. In case of watchdog, the PMIC goes off. Signed-off-by: Pascal Paillet Reviewed-by: Rob Herring Reviewed-by: Guenter Roeck --- changes in v6: nothing Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt new file mode 100644 index 0000000..7cc1407 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt @@ -0,0 +1,11 @@ +STMicroelectronics STPMIC1 Watchdog + +Required properties: + +- compatible : should be "st,stpmic1-wdt" + +Example: + +watchdog { + compatible = "st,stpmic1-wdt"; +}; From patchwork Tue Nov 27 16:52:17 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pascal Paillet X-Patchwork-Id: 10700837 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 57C9914BD for ; Tue, 27 Nov 2018 16:53:05 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 436E92C37E for ; Tue, 27 Nov 2018 16:53:05 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 37A892C3B3; Tue, 27 Nov 2018 16:53:05 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.3 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI,URIBL_SBL autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 71DE62C2E5 for ; Tue, 27 Nov 2018 16:53:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731504AbeK1DvV convert rfc822-to-8bit (ORCPT ); Tue, 27 Nov 2018 22:51:21 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:46345 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731485AbeK1DvV (ORCPT ); Tue, 27 Nov 2018 22:51:21 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id wARGmoap029026; Tue, 27 Nov 2018 17:52:18 +0100 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2nxw02hg0y-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 27 Nov 2018 17:52:18 +0100 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6F0E4353; Tue, 27 Nov 2018 17:51:50 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node1.st.com [10.75.127.16]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 296CC533F; Tue, 27 Nov 2018 16:52:18 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE1.st.com (10.75.127.16) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Tue, 27 Nov 2018 17:52:17 +0100 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Tue, 27 Nov 2018 17:52:17 +0100 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" , "axel.lin@ingics.com" CC: Pascal PAILLET-LME Subject: [PATCH v6 8/8] watchdog: stpmic1: add stpmic1 watchdog driver Thread-Topic: [PATCH v6 8/8] watchdog: stpmic1: add stpmic1 watchdog driver Thread-Index: AQHUhnGOZ65hVM0yOEigq3OCl6naug== Date: Tue, 27 Nov 2018 16:52:17 +0000 Message-ID: <1543337529-22301-9-git-send-email-p.paillet@st.com> References: <1543337529-22301-1-git-send-email-p.paillet@st.com> In-Reply-To: <1543337529-22301-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-11-27_14:,, signatures=0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The stpmic1 PMIC embeds a watchdog which is disabled by default. As soon as the watchdog is started, it must be refreshed periodically otherwise the PMIC goes off. Signed-off-by: Pascal Paillet Reviewed-by: Guenter Roeck --- changes in v6: nothing drivers/watchdog/Kconfig | 12 ++++ drivers/watchdog/Makefile | 1 + drivers/watchdog/stpmic1_wdt.c | 139 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 drivers/watchdog/stpmic1_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 5ea8909..6d2ffef 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -806,6 +806,18 @@ config STM32_WATCHDOG To compile this driver as a module, choose M here: the module will be called stm32_iwdg. +config STPMIC1_WATCHDOG + tristate "STPMIC1 PMIC watchdog support" + depends on MFD_STPMIC1 + select WATCHDOG_CORE + help + Say Y here to include watchdog support embedded into STPMIC1 PMIC. + If the watchdog timer expires, stpmic1 will shut down all its power + supplies. + + To compile this driver as a module, choose M here: the + module will be called spmic1_wdt. + config UNIPHIER_WATCHDOG tristate "UniPhier watchdog support" depends on ARCH_UNIPHIER || COMPILE_TEST diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index bf92e7b..2649cf3 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -217,3 +217,4 @@ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o +obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o diff --git a/drivers/watchdog/stpmic1_wdt.c b/drivers/watchdog/stpmic1_wdt.c new file mode 100644 index 0000000..ad431d8 --- /dev/null +++ b/drivers/watchdog/stpmic1_wdt.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet for STMicroelectronics. + +#include +#include +#include +#include +#include +#include +#include +#include + +/* WATCHDOG CONTROL REGISTER bit */ +#define WDT_START BIT(0) +#define WDT_PING BIT(1) +#define WDT_START_MASK BIT(0) +#define WDT_PING_MASK BIT(1) +#define WDT_STOP 0 + +#define PMIC_WDT_MIN_TIMEOUT 1 +#define PMIC_WDT_MAX_TIMEOUT 256 +#define PMIC_WDT_DEFAULT_TIMEOUT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct stpmic1_wdt { + struct stpmic1 *pmic; + struct watchdog_device wdtdev; +}; + +static int pmic_wdt_start(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_START_MASK, WDT_START); +} + +static int pmic_wdt_stop(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_START_MASK, WDT_STOP); +} + +static int pmic_wdt_ping(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_PING_MASK, WDT_PING); +} + +static int pmic_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + wdd->timeout = timeout; + /* timeout is equal to register value + 1 */ + return regmap_write(wdt->pmic->regmap, WCHDG_TIMER_CR, timeout - 1); +} + +static const struct watchdog_info pmic_watchdog_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "STPMIC1 PMIC Watchdog", +}; + +static const struct watchdog_ops pmic_watchdog_ops = { + .owner = THIS_MODULE, + .start = pmic_wdt_start, + .stop = pmic_wdt_stop, + .ping = pmic_wdt_ping, + .set_timeout = pmic_wdt_set_timeout, +}; + +static int pmic_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct stpmic1 *pmic; + struct stpmic1_wdt *wdt; + + if (!pdev->dev.parent) + return -EINVAL; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) + return -EINVAL; + + wdt = devm_kzalloc(&pdev->dev, sizeof(struct stpmic1_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->pmic = pmic; + + wdt->wdtdev.info = &pmic_watchdog_info; + wdt->wdtdev.ops = &pmic_watchdog_ops; + wdt->wdtdev.min_timeout = PMIC_WDT_MIN_TIMEOUT; + wdt->wdtdev.max_timeout = PMIC_WDT_MAX_TIMEOUT; + wdt->wdtdev.parent = &pdev->dev; + + wdt->wdtdev.timeout = PMIC_WDT_DEFAULT_TIMEOUT; + watchdog_init_timeout(&wdt->wdtdev, 0, &pdev->dev); + + watchdog_set_nowayout(&wdt->wdtdev, nowayout); + watchdog_set_drvdata(&wdt->wdtdev, wdt); + + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev); + if (ret) + return ret; + + dev_dbg(wdt->pmic->dev, "PMIC Watchdog driver probed\n"); + return 0; +} + +static const struct of_device_id of_pmic_wdt_match[] = { + { .compatible = "st,stpmic1-wdt" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, of_pmic_wdt_match); + +static struct platform_driver stpmic1_wdt_driver = { + .probe = pmic_wdt_probe, + .driver = { + .name = "stpmic1-wdt", + .of_match_table = of_pmic_wdt_match, + }, +}; +module_platform_driver(stpmic1_wdt_driver); + +MODULE_DESCRIPTION("Watchdog driver for STPMIC1 device"); +MODULE_AUTHOR("Pascal Paillet "); +MODULE_LICENSE("GPL v2");