From patchwork Mon Oct 11 19:55:01 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Denis Pauk X-Patchwork-Id: 12550981 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0D3A0C433FE for ; Mon, 11 Oct 2021 19:55:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id EA44461076 for ; Mon, 11 Oct 2021 19:55:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234776AbhJKT54 (ORCPT ); Mon, 11 Oct 2021 15:57:56 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35026 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234343AbhJKT5z (ORCPT ); Mon, 11 Oct 2021 15:57:55 -0400 Received: from mail-ed1-x52b.google.com (mail-ed1-x52b.google.com [IPv6:2a00:1450:4864:20::52b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F2C68C061570; Mon, 11 Oct 2021 12:55:54 -0700 (PDT) Received: by mail-ed1-x52b.google.com with SMTP id ec8so22304679edb.6; Mon, 11 Oct 2021 12:55:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=BQwQs8ACE6juMznQ2I0/KPgDidGXAy3Ywn2y2AP87lI=; b=pvVomB8Q17P2QtmlYSIPIWdm2gv7va6vqmiPKvhczpx5PwITWJO/MD5lLjI1FW2cvm +wklAh97OessKbj9IQOiwfAa9/tHBjc1D++i6CFYtlKuMyzVLbU2C3V2PQ9OklvvpTiG Kdy+piuE5IjxK6R/2+CJZmAKIkjoUIFVZ/haWZqV+T03lCSlyKxNSeSUVQsHnIGHZ2oU b/sbb4N90SYYxNWMvM0cbwqT4B7Lywv4mneJBBJqyhqtuXPbrNm/bW5QR+iL9ydJNaxF 9sFQykaNUOFUeYSi0RbLAw6MKBgC5q89lc+qK2U2XGhx0vc1LakVM9xA5ha9clCEj4EO 7iwA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=BQwQs8ACE6juMznQ2I0/KPgDidGXAy3Ywn2y2AP87lI=; b=WFR4V6MvSBuFLkonT9blYWjmh+PmQ/RGOowyQCd+VS227VtNV+UXN2ePu3OVYoAAcM f6z7VgRxFRhgZg5fmTo0JPCQF5n/uuvlYlzg62zdeEdhPPgv5QjhJzYRFQKxbzgnb14q nHHynNiOHrK9Zs4v1cprEQd0CYc549J1/ytw/YCmF1XUubs5mz3uqgK8dr3p0sE3feAP 0IVat3Mk74gVeS02lSPvpj/3lIdUnTMbyKjs4t6UvKci3CshvLIDi+goQ/z3tn/VJ6Hr pZMdPZkMftKBJ9aL9qdXVBar4LsgqetaT7RfhQnnU1yGrwW2JhAK4ECdf596JNY2HvHH qelg== X-Gm-Message-State: AOAM530U1dM8hbq9a5ssQCwX/krZf4+Br+dTMWL2iyiy4WyJiRsZBT0Y mGvFUx3JsPiw8MYYvvZqgKw= X-Google-Smtp-Source: ABdhPJwdYftJc/uIt7f6uDXUxSyzsKSVXhdAewnvvnX3UOTy54eq5ANR1blukC2zQrUklYQoX6PBVg== X-Received: by 2002:a05:6402:3587:: with SMTP id y7mr44201492edc.182.1633982153359; Mon, 11 Oct 2021 12:55:53 -0700 (PDT) Received: from localhost.localdomain ([94.179.1.5]) by smtp.gmail.com with ESMTPSA id r3sm4654762edo.59.2021.10.11.12.55.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 11 Oct 2021 12:55:53 -0700 (PDT) From: Denis Pauk Cc: eugene.shalygin@gmail.com, andy.shevchenko@gmail.com, pauk.denis@gmail.com, platform-driver-x86@vger.kernel.org, Tor Vic , kernel test robot , Jean Delvare , Guenter Roeck , Jonathan Corbet , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 1/2] hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI. Date: Mon, 11 Oct 2021 22:55:01 +0300 Message-Id: <20211011195503.23153-2-pauk.denis@gmail.com> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20211011195503.23153-1-pauk.denis@gmail.com> References: <20211011195503.23153-1-pauk.denis@gmail.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Linux HWMON sensors driver for ASUS motherboards to read sensors from the embedded controller. Many ASUS motherboards do not publish all the available sensors via the Super I/O chip but the missing ones are available through the embedded controller (EC) registers. This driver implements reading those sensor data via the WMI method BREC, which is known to be present in all ASUS motherboards based on the AMD 500 series chipsets (and probably is available in other models too). The driver needs to know exact register addresses for the sensors and thus support for each motherboard has to be added explicitly. The EC registers do not provide critical values for the sensors and as such they are not published to the HWMON. Supported motherboards: * PRIME X570-PRO * ROG CROSSHAIR VIII HERO * ROG CROSSHAIR VIII DARK HERO * ROG CROSSHAIR VIII FORMULA * ROG STRIX X570-E GAMING * ROG STRIX B550-E GAMING Signed-off-by: Denis Pauk Co-developed-by: Eugene Shalygin Signed-off-by: Eugene Shalygin Tested-by: Tor Vic Reported-by: kernel test robot --- Changes in v5: - Fixes build issue reported by kernel test robot with disabled ACPI_WMI. Changes in v4: - implement wmi driver instead platform driver. Changes in v3: - Use MODULE_DEVICE_TABLE for match devices. - Use get_unaligned_be32 instead incorrectly used get_unaligned_le32. - Add documentaion for driver. Changes in v2: - Use utf8s_to_utf16s/utf16s_to_utf8s instead handmade fuctions. - Use post increment. - Use get_unaligned* for convert values. - Use PTR_ERR_OR_ZERO. - Specify per-board sensors in a declarative way (by Eugene Shalygin). --- Documentation/hwmon/asus_wmi_ec_sensors.rst | 35 ++ MAINTAINERS | 7 + drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 1 + drivers/hwmon/asus_wmi_ec_sensors.c | 648 ++++++++++++++++++++ 5 files changed, 702 insertions(+) create mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst create mode 100644 drivers/hwmon/asus_wmi_ec_sensors.c diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst new file mode 100644 index 000000000000..e4f603804a82 --- /dev/null +++ b/Documentation/hwmon/asus_wmi_ec_sensors.rst @@ -0,0 +1,35 @@ +Kernel driver asus-wmi-ec-sensors +================================= + +Supported boards: + * PRIME X570-PRO, + * Pro WS X570-ACE, + * ROG CROSSHAIR VIII DARK HERO, + * ROG CROSSHAIR VIII FORMULA, + * ROG CROSSHAIR VIII HERO, + * ROG STRIX B550-E GAMING, + * ROG STRIX X570-E GAMING. + +Authors: + Eugene Shalygin + +Description: +------------ +ASUS mainboards publish hardware monitoring information via Super I/O +chip and the ACPI embedded controller (EC) registers. Some of the sensors +are only available via the EC. + +ASUS WMI interface provides a method (BREC) to read data from EC registers, +which is utilized by this driver to publish those sensor readings to the +HWMON system. The driver is aware of and reads the following sensors: + +1. Chipset (PCH) temperature +2. CPU package temperature +3. Motherboard temperature +4. Readings from the T_Sensor header +5. VRM temperature +6. CPU_Opt fan RPM +7. Chipset fan RPM +8. Readings from the "Water flow meter" header (RPM) +9. Readings from the "Water In" and "Water Out" temperature headers +10. CPU current diff --git a/MAINTAINERS b/MAINTAINERS index cc5eaf4e65dc..05448435991d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2937,6 +2937,13 @@ W: http://acpi4asus.sf.net F: drivers/platform/x86/asus*.c F: drivers/platform/x86/eeepc*.c +ASUS WMI HARDWARE MONITOR DRIVER +M: Eugene Shalygin +M: Denis Pauk +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/asus_wmi_ec_sensors.c + ASUS WIRELESS RADIO CONTROL DRIVER M: João Paulo Rechi Vita L: platform-driver-x86@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7fde4c6e1e7f..430a438432a0 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2215,6 +2215,17 @@ config SENSORS_ATK0110 This driver can also be built as a module. If so, the module will be called asus_atk0110. +config SENSORS_ASUS_WMI_EC + tristate "ASUS WMI B550/X570" + help + If you say yes here you get support for the ACPI embedded controller + hardware monitoring interface found in B550/X570 ASUS motherboards. + This driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_wmi_sensors_ec. + endif # ACPI endif # HWMON diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index baee6a8d4dd1..aae2ff5c7335 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o # APCI drivers obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o +obj-$(CONFIG_SENSORS_ASUS_WMI_EC) += asus_wmi_ec_sensors.o # Native drivers # asb100, then w83781d go first, as they can override other drivers' addresses. diff --git a/drivers/hwmon/asus_wmi_ec_sensors.c b/drivers/hwmon/asus_wmi_ec_sensors.c new file mode 100644 index 000000000000..f9d8a0be7bea --- /dev/null +++ b/drivers/hwmon/asus_wmi_ec_sensors.c @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * HWMON driver for ASUS B550/X570 motherboards that publish sensor + * values via the embedded controller registers. + * + * Copyright (C) 2021 Eugene Shalygin + * Copyright (C) 2018-2019 Ed Brindley + * + * EC provides: + * Chipset temperature, + * CPU temperature, + * Motherboard temperature, + * T_Sensor temperature, + * VRM temperature, + * Water In temperature, + * Water Out temperature, + * CPU Optional Fan RPM, + * Chipset Fan RPM, + * Water Flow Fan RPM, + * CPU current. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" +#define ASUSWMI_METHODID_BLOCK_READ_EC 0x42524543 /* BREC */ + +#define ASUS_WMI_BLOCK_READ_REGISTERS_MAX 0x10 /* from the ASUS DSDT source */ +/* from the ASUS_WMI_BLOCK_READ_REGISTERS_MAX value */ +#define ASUS_WMI_MAX_BUF_LEN 0x80 +#define MAX_SENSOR_LABEL_LENGTH 0x10 + +static u32 hwmon_attributes[] = { + [hwmon_chip] = HWMON_C_REGISTER_TZ, + [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, + [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL, + [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL, + [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL, +}; + +struct asus_wmi_ec_sensor_address { + u8 index; + u8 bank; + u8 size; +}; + +#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) \ + { .size = size_i,\ + .bank = bank_i,\ + .index = index_i} + +struct ec_sensor_info { + char label[MAX_SENSOR_LABEL_LENGTH]; + enum hwmon_sensor_types type; + struct asus_wmi_ec_sensor_address addr; +}; + +#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) \ + { .label = sensor_label,\ + .type = sensor_type, \ + .addr = MAKE_SENSOR_ADDRESS(size, bank, index) \ + } + +enum known_ec_sensor { + SENSOR_TEMP_CHIPSET, + SENSOR_TEMP_CPU, + SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, + SENSOR_TEMP_VRM, + SENSOR_FAN_CPU_OPT, + SENSOR_FAN_CHIPSET, + SENSOR_FAN_WATER_FLOW, + SENSOR_CURR_CPU, + SENSOR_TEMP_WATER_IN, + SENSOR_TEMP_WATER_OUT, + SENSOR_MAX +}; + +/* + * All the known sensors for ASUS EC controllers + */ +static const struct ec_sensor_info known_ec_sensors[] = { + [SENSOR_TEMP_CHIPSET] = EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a), + [SENSOR_TEMP_CPU] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b), + [SENSOR_TEMP_MB] = EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c), + [SENSOR_TEMP_T_SENSOR] = EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d), + [SENSOR_TEMP_VRM] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e), + [SENSOR_FAN_CPU_OPT] = EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0), + [SENSOR_FAN_CHIPSET] = EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4), + [SENSOR_FAN_WATER_FLOW] = EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc), + [SENSOR_CURR_CPU] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4), + [SENSOR_TEMP_WATER_IN] = EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00), + [SENSOR_TEMP_WATER_OUT] = EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01), +}; + +struct asus_wmi_data { + const enum known_ec_sensor known_board_sensors[SENSOR_MAX + 1]; +}; + +/* boards with EC support */ +static struct asus_wmi_data sensors_board_PW_X570_P = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM, + SENSOR_FAN_CHIPSET, + SENSOR_MAX + }, +}; + +static struct asus_wmi_data sensors_board_PW_X570_A = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM, + SENSOR_FAN_CHIPSET, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +static struct asus_wmi_data sensors_board_R_C8H = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT, + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, SENSOR_FAN_WATER_FLOW, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +/* Same as Hero but without chipset fan */ +static struct asus_wmi_data sensors_board_R_C8DH = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, + SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT, + SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +/* Same as Hero but without water */ +static struct asus_wmi_data sensors_board_R_C8F = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, + SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +static struct asus_wmi_data sensors_board_RS_B550_E_G = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, + SENSOR_FAN_CPU_OPT, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +static struct asus_wmi_data sensors_board_RS_X570_E_G = { + .known_board_sensors = { + SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, + SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM, + SENSOR_FAN_CHIPSET, + SENSOR_CURR_CPU, + SENSOR_MAX + }, +}; + +static struct asus_wmi_data *board_sensors; + +static int __init asus_wmi_dmi_matched(const struct dmi_system_id *d) +{ + board_sensors = d->driver_data; + return 0; +} + +#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) \ + { \ + .callback = asus_wmi_dmi_matched, \ + .matches = { \ + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, \ + "ASUSTeK COMPUTER INC."), \ + DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \ + }, \ + .driver_data = sensors, \ + } + +static const struct dmi_system_id asus_wmi_ec_dmi_table[] = { + DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G), + {} +}; +MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table); + +struct ec_sensor { + enum known_ec_sensor info_index; + u32 cached_value; +}; + +/** + * struct asus_wmi_ec_info - sensor info. + * @sensors: list of sensors. + * @read_arg: UTF-16 string to pass to BRxx() WMI function. + * @read_buffer: decoded output from WMI result. + * @nr_sensors: number of board EC sensors. + * @nr_registers: number of EC registers to read (sensor might span more than + * 1 register). + * @last_updated: in jiffies. + */ +struct asus_wmi_ec_info { + struct ec_sensor sensors[SENSOR_MAX]; + char read_arg[((ASUS_WMI_BLOCK_READ_REGISTERS_MAX * 4) + 1) * 2]; + u8 read_buffer[ASUS_WMI_BLOCK_READ_REGISTERS_MAX]; + unsigned int nr_sensors; + unsigned int nr_registers; + unsigned long last_updated; +}; + +struct asus_wmi_sensors { + /* lock access to instrnal cache */ + struct mutex lock; + struct asus_wmi_ec_info ec; +}; + +static int asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec) +{ + const enum known_ec_sensor *bsi; + struct ec_sensor *s = ec->sensors; + int i; + + if (!board_sensors) + return -ENODEV; + + bsi = board_sensors->known_board_sensors; + ec->nr_sensors = 0; + ec->nr_registers = 0; + + for (i = 0; i < SENSOR_MAX && bsi[i] != SENSOR_MAX; i++) { + s[i].info_index = bsi[i]; + s[i].cached_value = 0; + ec->nr_sensors++; + ec->nr_registers += known_ec_sensors[bsi[i]].addr.size; + } + + return 0; +} + +/* + * The next four functions converts to/from BRxx string argument format + * The format of the string is as follows: + * The string consists of two-byte UTF-16 characters + * The value of the very first byte int the string is equal to the total length + * of the next string in bytes, thus excluding the first two-byte character + * The rest of the string encodes pairs of (bank, index) pairs, where both + * values are byte-long (0x00 to 0xFF) + * Numbers are encoded as UTF-16 hex values + */ +static void asus_wmi_ec_decode_reply_buffer(const u8 *inp, u8 *out) +{ + unsigned int len = ACPI_MIN(ASUS_WMI_MAX_BUF_LEN, inp[0] / 4); + char buffer[ASUS_WMI_MAX_BUF_LEN * 2]; + const char *pos = buffer; + const u8 *data = inp + 2; + unsigned int i; + + utf16s_to_utf8s((wchar_t *)data, len * 2, UTF16_LITTLE_ENDIAN, buffer, len * 2); + + for (i = 0; i < len; i++, pos += 2) + out[i] = (hex_to_bin(pos[0]) << 4) + hex_to_bin(pos[1]); +} + +static void asus_wmi_ec_encode_registers(u16 *registers, u8 len, char *out) +{ + char buffer[ASUS_WMI_MAX_BUF_LEN * 2]; + char *pos = buffer; + unsigned int i; + u8 byte; + + *out++ = len * 8; + *out++ = 0; + + for (i = 0; i < len; i++) { + byte = registers[i] >> 8; + *pos = hex_asc_hi(byte); + pos++; + *pos = hex_asc_lo(byte); + pos++; + byte = registers[i]; + *pos = hex_asc_hi(byte); + pos++; + *pos = hex_asc_lo(byte); + pos++; + } + + utf8s_to_utf16s(buffer, len * 4, UTF16_LITTLE_ENDIAN, (wchar_t *)out, len * 4); +} + +static void asus_wmi_ec_make_block_read_query(struct asus_wmi_ec_info *ec) +{ + u16 registers[ASUS_WMI_BLOCK_READ_REGISTERS_MAX]; + const struct ec_sensor_info *si; + int i, j, register_idx = 0; + + /* + * if we can get values for all the registers in a single query, + * the query will not change from call to call + */ + if (ec->nr_registers <= ASUS_WMI_BLOCK_READ_REGISTERS_MAX && + ec->read_arg[0] > 0) { + /* no need to update */ + return; + } + + for (i = 0; i < ec->nr_sensors; i++) { + si = &known_ec_sensors[ec->sensors[i].info_index]; + for (j = 0; j < si->addr.size; + j++, register_idx++) { + registers[register_idx] = (si->addr.bank << 8) + si->addr.index + j; + } + } + + asus_wmi_ec_encode_registers(registers, ec->nr_registers, ec->read_arg); +} + +static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out) +{ +#if IS_ENABLED(CONFIG_ACPI_WMI) + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, + NULL }; + struct acpi_buffer input; + union acpi_object *obj; + acpi_status status; + + /* the first byte of the BRxx() argument string has to be the string size */ + input.length = (acpi_size)query[0] + 2; + input.pointer = query; + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, + &output); + if (ACPI_FAILURE(status)) + return -EIO; + + obj = output.pointer; + if (!obj || obj->type != ACPI_TYPE_BUFFER) { + if (!obj) + acpi_os_free(output.pointer); + + return -EIO; + } + asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, out); + acpi_os_free(output.pointer); + return 0; +#else + return -EOPNOTSUPP; +#endif +} + +static int asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info *ec) +{ + const struct ec_sensor_info *si; + struct ec_sensor *s; + + int status; + u8 i_sensor, read_reg_ct; + + asus_wmi_ec_make_block_read_query(ec); + status = asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC, + ec->read_arg, + ec->read_buffer); + if (status) + return status; + + read_reg_ct = 0; + for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) { + s = &ec->sensors[i_sensor]; + si = &known_ec_sensors[s->info_index]; + + switch (si->addr.size) { + case 1: + s->cached_value = ec->read_buffer[read_reg_ct]; + break; + case 2: + s->cached_value = get_unaligned_be16(&ec->read_buffer[read_reg_ct]); + break; + case 4: + s->cached_value = get_unaligned_be32(&ec->read_buffer[read_reg_ct]); + break; + default: + s->cached_value = 0; + } + read_reg_ct += si->addr.size; + } + return 0; +} + +static int asus_wmi_ec_scale_sensor_value(u32 value, int data_type) +{ + switch (data_type) { + case hwmon_curr: + case hwmon_temp: + case hwmon_in: + return value * KILO; + default: + return value; + } +} + +static int asus_wmi_ec_find_sensor_index(const struct asus_wmi_ec_info *ec, + enum hwmon_sensor_types type, int channel) +{ + int i; + + for (i = 0; i < ec->nr_sensors; i++) { + if (known_ec_sensors[ec->sensors[i].info_index].type == type) { + if (channel == 0) + return i; + + channel--; + } + } + return -EINVAL; +} + +static int asus_wmi_ec_get_cached_value_or_update(int sensor_index, + struct asus_wmi_sensors *state, + u32 *value) +{ + int ret; + + if (time_after(jiffies, state->ec.last_updated + HZ)) { + ret = asus_wmi_ec_update_ec_sensors(&state->ec); + if (ret) + return ret; + + state->ec.last_updated = jiffies; + } + + *value = state->ec.sensors[sensor_index].cached_value; + return 0; +} + +/* + * Now follow the functions that implement the hwmon interface + */ + +static int asus_wmi_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); + int ret, sidx, info_index; + u32 value = 0; + + sidx = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); + if (sidx < 0) + return sidx; + + mutex_lock(&sensor_data->lock); + ret = asus_wmi_ec_get_cached_value_or_update(sidx, sensor_data, &value); + mutex_unlock(&sensor_data->lock); + if (ret) + return ret; + + info_index = sensor_data->ec.sensors[sidx].info_index; + *val = asus_wmi_ec_scale_sensor_value(value, + known_ec_sensors[info_index].type); + + return ret; +} + +static int asus_wmi_ec_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); + int sensor_index; + + sensor_index = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); + *str = known_ec_sensors[sensor_data->ec.sensors[sensor_index].info_index].label; + + return 0; +} + +static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + int index; + const struct asus_wmi_sensors *sensor_data = drvdata; + + index = asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel); + + return index == 0xff ? 0 : 0444; +} + +static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan, + struct device *dev, int num, + enum hwmon_sensor_types type, u32 config) +{ + u32 *cfg; + + cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + asus_wmi_hwmon_chan->type = type; + asus_wmi_hwmon_chan->config = cfg; + memset32(cfg, config, num); + + return 0; +} + +static const struct hwmon_ops asus_wmi_ec_hwmon_ops = { + .is_visible = asus_wmi_ec_hwmon_is_visible, + .read = asus_wmi_ec_hwmon_read, + .read_string = asus_wmi_ec_hwmon_read_string, +}; + +static struct hwmon_chip_info asus_wmi_ec_chip_info = { + .ops = &asus_wmi_ec_hwmon_ops, +}; + +static int asus_wmi_ec_configure_sensor_setup(struct device *dev, + struct asus_wmi_sensors *sensor_data) +{ + struct hwmon_channel_info *asus_wmi_hwmon_chan; + const struct hwmon_channel_info **ptr_asus_wmi_ci; + int nr_count[hwmon_max] = { 0 }, nr_types = 0; + const struct hwmon_chip_info *chip_info; + const struct ec_sensor_info *si; + enum hwmon_sensor_types type; + struct device *hwdev; + int i, ret; + + ret = asus_wmi_ec_fill_board_sensors(&sensor_data->ec); + if (ret) + return ret; + + if (!sensor_data->ec.nr_sensors) + return -ENODEV; + + for (i = 0; i < sensor_data->ec.nr_sensors; i++) { + si = &known_ec_sensors[sensor_data->ec.sensors[i].info_index]; + if (!nr_count[si->type]) + nr_types++; + nr_count[si->type]++; + } + + if (nr_count[hwmon_temp]) { + nr_count[hwmon_chip]++; + nr_types++; + } + + asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, + sizeof(*asus_wmi_hwmon_chan), + GFP_KERNEL); + if (!asus_wmi_hwmon_chan) + return -ENOMEM; + + ptr_asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, + sizeof(*ptr_asus_wmi_ci), GFP_KERNEL); + if (!ptr_asus_wmi_ci) + return -ENOMEM; + + asus_wmi_ec_chip_info.info = ptr_asus_wmi_ci; + chip_info = &asus_wmi_ec_chip_info; + + for (type = 0; type < hwmon_max; type++) { + if (!nr_count[type]) + continue; + + ret = asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev, + nr_count[type], type, + hwmon_attributes[type]); + if (ret) + return ret; + + *ptr_asus_wmi_ci++ = asus_wmi_hwmon_chan++; + } + + dev_dbg(dev, "board has %d EC sensors that span %d registers", + sensor_data->ec.nr_sensors, + sensor_data->ec.nr_registers); + + hwdev = devm_hwmon_device_register_with_info(dev, KBUILD_MODNAME, + sensor_data, chip_info, NULL); + + return PTR_ERR_OR_ZERO(hwdev); +} + +static int asus_wmi_probe(struct wmi_device *wdev, const void *context) +{ + struct asus_wmi_sensors *sensor_data; + struct device *dev = &wdev->dev; + + if (!dmi_check_system(asus_wmi_ec_dmi_table)) + return -ENODEV; + + sensor_data = devm_kzalloc(dev, sizeof(struct asus_wmi_sensors), + GFP_KERNEL); + if (!sensor_data) + return -ENOMEM; + + mutex_init(&sensor_data->lock); + + dev_set_drvdata(dev, sensor_data); + + /* ec init */ + return asus_wmi_ec_configure_sensor_setup(dev, + sensor_data); +} + +static const struct wmi_device_id asus_ec_wmi_id_table[] = { + { ASUSWMI_MONITORING_GUID, NULL }, + { } +}; + +static struct wmi_driver asus_sensors_wmi_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .id_table = asus_ec_wmi_id_table, + .probe = asus_wmi_probe, +}; +module_wmi_driver(asus_sensors_wmi_driver); + +MODULE_AUTHOR("Ed Brindley "); +MODULE_AUTHOR("Eugene Shalygin "); +MODULE_DESCRIPTION("Asus WMI Sensors Driver"); +MODULE_LICENSE("GPL"); From patchwork Mon Oct 11 19:55:02 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Denis Pauk X-Patchwork-Id: 12550983 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 35FEDC433F5 for ; Mon, 11 Oct 2021 19:56:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1F5B161078 for ; Mon, 11 Oct 2021 19:56:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234788AbhJKT6D (ORCPT ); Mon, 11 Oct 2021 15:58:03 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35046 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234783AbhJKT57 (ORCPT ); Mon, 11 Oct 2021 15:57:59 -0400 Received: from mail-ed1-x52d.google.com (mail-ed1-x52d.google.com [IPv6:2a00:1450:4864:20::52d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 978C7C061570; Mon, 11 Oct 2021 12:55:58 -0700 (PDT) Received: by mail-ed1-x52d.google.com with SMTP id w14so20231305edv.11; Mon, 11 Oct 2021 12:55:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=YLuKc+YZIeZnDY0o5sqrgDcvuo4NqW578FCZ1ONlohw=; b=H2sEM6uCBrtUREKxB8ilIOWJiPh2DBdKGhI4ZhNfNRIBMFfng6PMV1kxvPQm/Ovy7A LwOAcOHYJVK/yicAadk9rwAY6BPk8vFJbXM974dWCtfsnxZ/XwWL8T4ecbDGFOgsoDF4 H7tCbBIm/BS5gdRBwd1a3OX0RC/f6syDwrTIuwkooja3Blx9yH9o2gA2NXkEL7QX1psB tBdFTAM+GN+rR+eTiytfDY3LmkYnJ1AxYCeMg4CV+1ltWVcMTXQt+Kbd85NFnxLR3+8N NdqfE6z+I45Mf/dAuUB5uI5BnVr/Dt+dJ6S6P5/el+b6DMJH+9fL895B5Tl/B5E6GqM9 WE7Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=YLuKc+YZIeZnDY0o5sqrgDcvuo4NqW578FCZ1ONlohw=; b=Jl3uR8R8Kf1Pi2xvgvo81sNNqj4qdrQXSwA3EbIg7/UTB3ZIa12+NiSYFp7Chq01O1 OGyejhqOdAO85jz6rUxo+WwKMyuIge0LyWHlgaUS1XI0S1B7mIm53pD2s+QKq8r6BVtm pad+pbVTFsgJMg+uFhxCG+pFN8az8XKLEmRcpAxjov1QVlNKBMHHbU0R2ZwkfsZ66arN cGbynL+WGOdwzJhHZRYp9XVrt1q5Du/5F1VEiZ/btkhrIEMRKtS9s38NkeU/p+REbasF CfVksGy2oFDUxPP5w7Lk63sfL7aZWAbkCz64C5vEfgYoNGSzOwm3cPCHUZkkEORatr// rQZg== X-Gm-Message-State: AOAM533RCRU3YwuZZSN4raxQj5kOJOFIShp90ndrxTb5Sri9JbMbeCux RDNQKMxkRLRwW2o6CDrTzFc= X-Google-Smtp-Source: ABdhPJyO1oKOfFQMHWJVdomTQb4A6xlkvrCN8CnevTLvTNaxqRde4yIPh7QIYVeE0kT5L8+d7arcaA== X-Received: by 2002:a50:bf02:: with SMTP id f2mr44548598edk.226.1633982156997; Mon, 11 Oct 2021 12:55:56 -0700 (PDT) Received: from localhost.localdomain ([94.179.1.5]) by smtp.gmail.com with ESMTPSA id r3sm4654762edo.59.2021.10.11.12.55.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 11 Oct 2021 12:55:56 -0700 (PDT) From: Denis Pauk Cc: eugene.shalygin@gmail.com, andy.shevchenko@gmail.com, pauk.denis@gmail.com, platform-driver-x86@vger.kernel.org, Ed Brindley , kernel test robot , Jean Delvare , Guenter Roeck , Jonathan Corbet , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 2/2] hwmon: (asus_wmi_sensors) Support X370 Asus WMI. Date: Mon, 11 Oct 2021 22:55:02 +0300 Message-Id: <20211011195503.23153-3-pauk.denis@gmail.com> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20211011195503.23153-1-pauk.denis@gmail.com> References: <20211011195503.23153-1-pauk.denis@gmail.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Provides a Linux kernel module "asus_wmi_sensors" that provides sensor readouts via ASUS' WMI interface present in the UEFI of X370/X470/B450/X399 Ryzen motherboards. Supported motherboards: * ROG CROSSHAIR VI HERO, * PRIME X399-A, * PRIME X470-PRO, * ROG CROSSHAIR VI EXTREME, * ROG CROSSHAIR VI HERO (WI-FI AC), * ROG CROSSHAIR VII HERO, * ROG CROSSHAIR VII HERO (WI-FI), * ROG STRIX B450-E GAMING, * ROG STRIX B450-F GAMING, * ROG STRIX B450-I GAMING, * ROG STRIX X399-E GAMING, * ROG STRIX X470-F GAMING, * ROG STRIX X470-I GAMING, * ROG ZENITH EXTREME, * ROG ZENITH EXTREME ALPHA. Signed-off-by: Denis Pauk Co-developed-by: Ed Brindley Signed-off-by: Ed Brindley Reported-by: kernel test robot --- Changes in v5: - Fixes build issue reported by kernel test robot with disabled ACPI_WMI. - Remove sensor->name check as always eevaluated to true. Changes in v4: - Implement wmi driver instead platform driver. - Update documentation. Changes in v3: - Use MODULE_DEVICE_TABLE for match devices. - Add documentaion for driver. Changes in v2: - Add module for boards with support of WMI interface returned sensor name and value of sensor.. --- Documentation/hwmon/asus_wmi_sensors.rst | 74 +++ MAINTAINERS | 1 + drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 1 + drivers/hwmon/asus_wmi_sensors.c | 621 +++++++++++++++++++++++ 5 files changed, 708 insertions(+) create mode 100644 Documentation/hwmon/asus_wmi_sensors.rst create mode 100644 drivers/hwmon/asus_wmi_sensors.c diff --git a/Documentation/hwmon/asus_wmi_sensors.rst b/Documentation/hwmon/asus_wmi_sensors.rst new file mode 100644 index 000000000000..e32bfb74289f --- /dev/null +++ b/Documentation/hwmon/asus_wmi_sensors.rst @@ -0,0 +1,74 @@ +Kernel driver asus-wmi-sensors +================================= + +Supported boards: + * PRIME X399-A, + * PRIME X470-PRO, + * ROG CROSSHAIR VI EXTREME, + * ROG CROSSHAIR VI HERO, + * ROG CROSSHAIR VI HERO (WI-FI AC), + * ROG CROSSHAIR VII HERO, + * ROG CROSSHAIR VII HERO (WI-FI), + * ROG STRIX B450-E GAMING, + * ROG STRIX B450-F GAMING, + * ROG STRIX B450-I GAMING, + * ROG STRIX X399-E GAMING, + * ROG STRIX X470-F GAMING, + * ROG STRIX X470-I GAMING, + * ROG ZENITH EXTREME, + * ROG ZENITH EXTREME ALPHA. + +Authors: + Ed Brindley + +Description: +------------ +ASUS mainboards publish hardware monitoring information via WMI interface. + +ASUS WMI interface provides a methods to get list of sensors and values of +such, which is utilized by this driver to publish those sensor readings to the +HWMON system. The driver is aware of and reads the following sensors: + * CPU Core Voltage, + * CPU SOC Voltage, + * DRAM Voltage, + * VDDP Voltage, + * 1.8V PLL Voltage, + * +12V Voltage, + * +5V Voltage, + * 3VSB Voltage, + * VBAT Voltage, + * AVCC3 Voltage, + * SB 1.05V Voltage, + * CPU Core Voltage, + * CPU SOC Voltage, + * DRAM Voltage, + * CPU Fan RPM, + * Chassis Fan 1 RPM, + * Chassis Fan 2 RPM, + * Chassis Fan 3 RPM, + * HAMP Fan RPM, + * Water Pump RPM, + * CPU OPT RPM, + * Water Flow RPM, + * AIO Pump RPM, + * CPU Temperature, + * CPU Socket Temperature, + * Motherboard Temperature, + * Chipset Temperature, + * Tsensor 1 Temperature, + * CPU VRM Temperature, + * Water In, + * Water Out, + * CPU VRM Output Current. + +Known Issues: +* The WMI implementation in some of Asus' BIOSes is buggy. This can result in + fans stopping, fans getting stuck at max speed, or temperature readouts + getting stuck. This is not an issue with the driver, but the BIOS. The Prime + X470 Pro seems particularly bad for this. The more frequently the WMI + interface is polled the greater the potential for this to happen. Until you + have subjected your computer to an extended soak test while polling the + sensors frequently, don't leave you computer unattended. Upgrading to new + BIOS version with method version greater than or equal to two should + rectify the issue. +* A few boards report 12v voltages to be ~10v. diff --git a/MAINTAINERS b/MAINTAINERS index 05448435991d..46036c184330 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2943,6 +2943,7 @@ M: Denis Pauk L: linux-hwmon@vger.kernel.org S: Maintained F: drivers/hwmon/asus_wmi_ec_sensors.c +F: drivers/hwmon/asus_wmi_sensors.c ASUS WIRELESS RADIO CONTROL DRIVER M: João Paulo Rechi Vita diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 430a438432a0..461328c4b00a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2215,6 +2215,17 @@ config SENSORS_ATK0110 This driver can also be built as a module. If so, the module will be called asus_atk0110. +config SENSORS_ASUS_WMI + tristate "ASUS WMI X370/X470/B450/X399" + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in X370/X470/B450/X399 ASUS motherboards. This driver + will provide readings of fans, voltages and temperatures through the system + firmware. + + This driver can also be built as a module. If so, the module + will be called asus_wmi_sensors. + config SENSORS_ASUS_WMI_EC tristate "ASUS WMI B550/X570" help diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index aae2ff5c7335..656a6191a0f8 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o # APCI drivers obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o +obj-$(CONFIG_SENSORS_ASUS_WMI) += asus_wmi_sensors.o obj-$(CONFIG_SENSORS_ASUS_WMI_EC) += asus_wmi_ec_sensors.o # Native drivers diff --git a/drivers/hwmon/asus_wmi_sensors.c b/drivers/hwmon/asus_wmi_sensors.c new file mode 100644 index 000000000000..a45fbec4e319 --- /dev/null +++ b/drivers/hwmon/asus_wmi_sensors.c @@ -0,0 +1,621 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * HWMON driver for ASUS motherboards that provides sensor readouts via WMI + * interface present in the UEFI of the X370/X470/B450/X399 Ryzen motherboards. + * + * Copyright (C) 2018-2019 Ed Brindley + * + * WMI interface provides: + * CPU Core Voltage, + * CPU SOC Voltage, + * DRAM Voltage, + * VDDP Voltage, + * 1.8V PLL Voltage, + * +12V Voltage, + * +5V Voltage, + * 3VSB Voltage, + * VBAT Voltage, + * AVCC3 Voltage, + * SB 1.05V Voltage, + * CPU Core Voltage, + * CPU SOC Voltage, + * DRAM Voltage, + * CPU Fan RPM, + * Chassis Fan 1 RPM, + * Chassis Fan 2 RPM, + * Chassis Fan 3 RPM, + * HAMP Fan RPM, + * Water Pump RPM, + * CPU OPT RPM, + * Water Flow RPM, + * AIO Pump RPM, + * CPU Temperature, + * CPU Socket Temperature, + * Motherboard Temperature, + * Chipset Temperature, + * Tsensor 1 Temperature, + * CPU VRM Temperature, + * Water In, + * Water Out, + * CPU VRM Output Current. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" +#define ASUSWMI_METHODID_GET_VALUE 0x52574543 +#define ASUSWMI_METHODID_UPDATE_BUFFER 0x51574543 +#define ASUSWMI_METHODID_GET_INFO 0x50574543 +#define ASUSWMI_METHODID_GET_NUMBER 0x50574572 +#define ASUSWMI_METHODID_GET_VERSION 0x50574574 + +#define ASUS_WMI_MAX_STR_SIZE 32 + +#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name) \ + { \ + .matches = { \ + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, \ + "ASUSTeK COMPUTER INC."), \ + DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \ + }, \ + } + +static const struct dmi_system_id asus_wmi_dmi_table[] = { + DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X399-A"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X470-PRO"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VI EXTREME"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VI HERO"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VI HERO (WI-FI AC)"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VII HERO"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VII HERO (WI-FI)"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B450-E GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B450-F GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B450-I GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X399-E GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X470-F GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X470-I GAMING"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG ZENITH EXTREME"), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG ZENITH EXTREME ALPHA"), + {} +}; +MODULE_DEVICE_TABLE(dmi, asus_wmi_dmi_table); + +enum asus_wmi_sensor_class { + VOLTAGE = 0x0, + TEMPERATURE_C = 0x1, + FAN_RPM = 0x2, + CURRENT = 0x3, + WATER_FLOW = 0x4, +}; + +enum asus_wmi_location { + CPU = 0x0, + CPU_SOC = 0x1, + DRAM = 0x2, + MOTHERBOARD = 0x3, + CHIPSET = 0x4, + AUX = 0x5, + VRM = 0x6, + COOLER = 0x7 +}; + +enum asus_wmi_type { + SIGNED_INT = 0x0, + UNSIGNED_INT = 0x1, + SCALED = 0x3, +}; + +enum asus_wmi_source { + SIO = 0x1, + EC = 0x2 +}; + +static enum hwmon_sensor_types asus_data_types[] = { + [VOLTAGE] = hwmon_in, + [TEMPERATURE_C] = hwmon_temp, + [FAN_RPM] = hwmon_fan, + [CURRENT] = hwmon_curr, + [WATER_FLOW] = hwmon_fan, +}; + +static u32 hwmon_attributes[] = { + [hwmon_chip] = HWMON_C_REGISTER_TZ, + [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, + [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL, + [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL, + [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL, +}; + +/** + * struct asus_wmi_sensor_info - sensor info. + * @id: sensor id. + * @data_type: sensor class e.g. voltage, temp etc. + * @location: sensor location. + * @name: sensor name. + * @source: sensor source. + * @type: sensor type signed, unsigned etc. + * @cached_value: cached sensor value. + */ +struct asus_wmi_sensor_info { + u32 id; + int data_type; + int location; + char name[ASUS_WMI_MAX_STR_SIZE]; + int source; + int type; + u32 cached_value; +}; + +struct asus_wmi_wmi_info { + u8 buffer; + unsigned long source_last_updated[3]; /* in jiffies */ + int sensor_count; + + const struct asus_wmi_sensor_info **info[hwmon_max]; + struct asus_wmi_sensor_info **info_by_id; +}; + +struct asus_wmi_sensors { + /* lock access to instrnal cache */ + struct mutex lock; + struct asus_wmi_wmi_info wmi; +}; + +/* + * Universal method for calling WMI method + */ +static int asus_wmi_call_method(u32 method_id, u32 *args, struct acpi_buffer *output) +{ +#if IS_ENABLED(CONFIG_ACPI_WMI) + struct acpi_buffer input = {(acpi_size) sizeof(*args), args }; + acpi_status status; + + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, output); + if (ACPI_FAILURE(status)) + return -EIO; + + return 0; +#else + return -EOPNOTSUPP; +#endif +} + +/* + * Gets the version of the ASUS sensors interface implemented + */ +static int asus_wmi_get_version(u32 *version) +{ + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 args[] = {0, 0, 0}; + union acpi_object *obj; + int err; + + err = asus_wmi_call_method(ASUSWMI_METHODID_GET_VERSION, args, &output); + if (err) + return err; + + obj = output.pointer; + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -EIO; + + *version = obj->integer.value; + + return 0; +} + +/* + * Gets the number of sensor items + */ +static int asus_wmi_get_item_count(u32 *count) +{ + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 args[] = {0, 0, 0}; + union acpi_object *obj; + int err; + + err = asus_wmi_call_method(ASUSWMI_METHODID_GET_NUMBER, args, &output); + if (err) + return err; + + obj = output.pointer; + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -EIO; + + *count = obj->integer.value; + + return 0; +} + +static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan, + struct device *dev, int num, + enum hwmon_sensor_types type, u32 config) +{ + u32 *cfg; + + cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + asus_wmi_hwmon_chan->type = type; + asus_wmi_hwmon_chan->config = cfg; + memset32(cfg, config, num); + + return 0; +} + +/* + * For a given sensor item returns details e.g. type (voltage/temperature/fan speed etc), bank etc + */ +static int asus_wmi_sensor_info(int index, struct asus_wmi_sensor_info *s) +{ + union acpi_object name_obj, data_type_obj, location_obj, source_obj, type_obj; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 args[] = {index, 0}; + union acpi_object *obj; + int err; + + err = asus_wmi_call_method(ASUSWMI_METHODID_GET_INFO, args, &output); + if (err) + return err; + + s->id = index; + + obj = output.pointer; + if (!obj || obj->type != ACPI_TYPE_PACKAGE) + return -EIO; + + if (obj->package.count != 5) + return 1; + + name_obj = obj->package.elements[0]; + + if (name_obj.type != ACPI_TYPE_STRING) + return 1; + + strncpy(s->name, name_obj.string.pointer, sizeof(s->name) - 1); + + data_type_obj = obj->package.elements[1]; + + if (data_type_obj.type != ACPI_TYPE_INTEGER) + return 1; + + s->data_type = data_type_obj.integer.value; + + location_obj = obj->package.elements[2]; + + if (location_obj.type != ACPI_TYPE_INTEGER) + return 1; + + s->location = location_obj.integer.value; + + source_obj = obj->package.elements[3]; + + if (source_obj.type != ACPI_TYPE_INTEGER) + return 1; + + s->source = source_obj.integer.value; + + type_obj = obj->package.elements[4]; + + if (type_obj.type != ACPI_TYPE_INTEGER) + return 1; + + s->type = type_obj.integer.value; + + return 0; +} + +static int asus_wmi_update_buffer(u8 source) +{ + u32 args[] = {source, 0}; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + + return asus_wmi_call_method(ASUSWMI_METHODID_UPDATE_BUFFER, args, &output); +} + +static int asus_wmi_get_sensor_value(u8 index, u32 *value) +{ + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 args[] = {index, 0}; + union acpi_object *obj; + int err; + + err = asus_wmi_call_method(ASUSWMI_METHODID_GET_VALUE, args, &output); + if (err) + return err; + + obj = output.pointer; + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -EIO; + + *value = obj->integer.value; + + return 0; +} + +static void asus_wmi_update_values_for_source(u8 source, struct asus_wmi_sensors *sensor_data) +{ + int ret = 0; + int value = 0; + int i; + struct asus_wmi_sensor_info *sensor; + + for (i = 0; i < sensor_data->wmi.sensor_count; i++) { + sensor = sensor_data->wmi.info_by_id[i]; + if (sensor && sensor->source == source) { + ret = asus_wmi_get_sensor_value(sensor->id, &value); + if (!ret) + sensor->cached_value = value; + } + } +} + +static int asus_wmi_scale_sensor_value(u32 value, int data_type) +{ + /* FAN_RPM and WATER_FLOW don't need scaling */ + switch (data_type) { + case VOLTAGE: + return DIV_ROUND_CLOSEST(value, 1000); + case TEMPERATURE_C: + return value * 1000; + case CURRENT: + return value * 1000; + } + return value; +} + +static int asus_wmi_get_cached_value_or_update(const struct asus_wmi_sensor_info *sensor, + struct asus_wmi_sensors *sensor_data, + u32 *value) +{ + int ret; + + if (time_after(jiffies, sensor_data->wmi.source_last_updated[sensor->source] + HZ)) { + ret = asus_wmi_update_buffer(sensor->source); + if (ret) + return -EIO; + + sensor_data->wmi.buffer = sensor->source; + + asus_wmi_update_values_for_source(sensor->source, sensor_data); + sensor_data->wmi.source_last_updated[sensor->source] = jiffies; + } + + *value = sensor->cached_value; + return 0; +} + +/* + * Now follow the functions that implement the hwmon interface + */ + +static int asus_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + int ret; + u32 value = 0; + const struct asus_wmi_sensor_info *sensor; + + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); + + sensor = *(sensor_data->wmi.info[type] + channel); + + mutex_lock(&sensor_data->lock); + ret = asus_wmi_get_cached_value_or_update(sensor, sensor_data, &value); + mutex_unlock(&sensor_data->lock); + if (!ret) + *val = asus_wmi_scale_sensor_value(value, sensor->data_type); + + return ret; +} + +static int asus_wmi_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + const struct asus_wmi_sensor_info *sensor; + struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev); + + sensor = *(sensor_data->wmi.info[type] + channel); + *str = sensor->name; + + return 0; +} + +static umode_t asus_wmi_hwmon_is_visible(const void *drvdata, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + const struct asus_wmi_sensor_info *sensor; + const struct asus_wmi_sensors *sensor_data = drvdata; + + sensor = *(sensor_data->wmi.info[type] + channel); + if (sensor) + return 0444; + + return 0; +} + +static const struct hwmon_ops asus_wmi_hwmon_ops = { + .is_visible = asus_wmi_hwmon_is_visible, + .read = asus_wmi_hwmon_read, + .read_string = asus_wmi_hwmon_read_string, +}; + +static struct hwmon_chip_info asus_wmi_chip_info = { + .ops = &asus_wmi_hwmon_ops, + .info = NULL, +}; + +static int asus_wmi_configure_sensor_setup(struct device *dev, + struct asus_wmi_sensors *sensor_data) +{ + int err; + int i, idx; + int nr_count[hwmon_max] = {0}, nr_types = 0; + struct device *hwdev; + struct hwmon_channel_info *asus_wmi_hwmon_chan; + struct asus_wmi_sensor_info *temp_sensor; + enum hwmon_sensor_types type; + const struct hwmon_channel_info **ptr_asus_wmi_ci; + const struct hwmon_chip_info *chip_info; + + sensor_data->wmi.buffer = -1; + temp_sensor = devm_kcalloc(dev, 1, sizeof(*temp_sensor), GFP_KERNEL); + if (!temp_sensor) + return -ENOMEM; + + for (i = 0; i < sensor_data->wmi.sensor_count; i++) { + err = asus_wmi_sensor_info(i, temp_sensor); + if (err) + return -EINVAL; + + switch (temp_sensor->data_type) { + case TEMPERATURE_C: + case VOLTAGE: + case CURRENT: + case FAN_RPM: + case WATER_FLOW: + type = asus_data_types[temp_sensor->data_type]; + if (!nr_count[type]) + nr_types++; + nr_count[type]++; + break; + } + } + + if (nr_count[hwmon_temp]) + nr_count[hwmon_chip]++, nr_types++; + + asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, + sizeof(*asus_wmi_hwmon_chan), + GFP_KERNEL); + if (!asus_wmi_hwmon_chan) + return -ENOMEM; + + ptr_asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, + sizeof(*ptr_asus_wmi_ci), GFP_KERNEL); + if (!ptr_asus_wmi_ci) + return -ENOMEM; + + asus_wmi_chip_info.info = ptr_asus_wmi_ci; + chip_info = &asus_wmi_chip_info; + + sensor_data->wmi.info_by_id = devm_kcalloc(dev, sensor_data->wmi.sensor_count, + sizeof(*sensor_data->wmi.info_by_id), + GFP_KERNEL); + + if (!sensor_data->wmi.info_by_id) + return -ENOMEM; + + for (type = 0; type < hwmon_max; type++) { + if (!nr_count[type]) + continue; + + asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev, + nr_count[type], type, + hwmon_attributes[type]); + *ptr_asus_wmi_ci++ = asus_wmi_hwmon_chan++; + + sensor_data->wmi.info[type] = devm_kcalloc(dev, + nr_count[type], + sizeof(*sensor_data->wmi.info), + GFP_KERNEL); + if (!sensor_data->wmi.info[type]) + return -ENOMEM; + } + + for (i = sensor_data->wmi.sensor_count - 1; i >= 0 ; i--) { + temp_sensor = devm_kzalloc(dev, sizeof(*temp_sensor), GFP_KERNEL); + if (!temp_sensor) + return -ENOMEM; + + err = asus_wmi_sensor_info(i, temp_sensor); + if (err) + continue; + + switch (temp_sensor->data_type) { + case TEMPERATURE_C: + case VOLTAGE: + case CURRENT: + case FAN_RPM: + case WATER_FLOW: + type = asus_data_types[temp_sensor->data_type]; + idx = --nr_count[type]; + *(sensor_data->wmi.info[type] + idx) = temp_sensor; + sensor_data->wmi.info_by_id[i] = temp_sensor; + break; + } + } + + dev_dbg(dev, "board has %d sensors", + sensor_data->wmi.sensor_count); + + hwdev = devm_hwmon_device_register_with_info(dev, KBUILD_MODNAME, + sensor_data, chip_info, NULL); + + return PTR_ERR_OR_ZERO(hwdev); +} + +static int asus_wmi_probe(struct wmi_device *wdev, const void *context) +{ + struct asus_wmi_sensors *sensor_data; + struct device *dev = &wdev->dev; + u32 version = 0; + + if (!dmi_check_system(asus_wmi_dmi_table)) + return -ENODEV; + + sensor_data = devm_kzalloc(dev, sizeof(struct asus_wmi_sensors), + GFP_KERNEL); + if (!sensor_data) + return -ENOMEM; + + if (asus_wmi_get_version(&version)) + return -ENODEV; + + if (asus_wmi_get_item_count(&sensor_data->wmi.sensor_count)) + return -ENODEV; + + if (sensor_data->wmi.sensor_count <= 0 || version < 2) { + dev_info(dev, "version: %u with %d sensors is unsupported\n", + version, sensor_data->wmi.sensor_count); + + return -ENODEV; + } + + mutex_init(&sensor_data->lock); + + dev_set_drvdata(dev, sensor_data); + + return asus_wmi_configure_sensor_setup(dev, + sensor_data); +} + +static const struct wmi_device_id asus_wmi_id_table[] = { + { ASUSWMI_MONITORING_GUID, NULL }, + { } +}; + +static struct wmi_driver asus_sensors_wmi_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .id_table = asus_wmi_id_table, + .probe = asus_wmi_probe, +}; +module_wmi_driver(asus_sensors_wmi_driver); + +MODULE_AUTHOR("Ed Brindley "); +MODULE_DESCRIPTION("Asus WMI Sensors Driver"); +MODULE_LICENSE("GPL");