From patchwork Thu Oct 14 10:52:36 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Niklas_S=C3=B6derlund?= X-Patchwork-Id: 12558289 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D2E75C433EF for ; Thu, 14 Oct 2021 10:52:48 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A595C60F41 for ; Thu, 14 Oct 2021 10:52:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230063AbhJNKyw (ORCPT ); Thu, 14 Oct 2021 06:54:52 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46536 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229513AbhJNKyw (ORCPT ); Thu, 14 Oct 2021 06:54:52 -0400 Received: from mail-wr1-x42b.google.com (mail-wr1-x42b.google.com [IPv6:2a00:1450:4864:20::42b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5EE89C061570 for ; Thu, 14 Oct 2021 03:52:47 -0700 (PDT) Received: by mail-wr1-x42b.google.com with SMTP id r18so18115616wrg.6 for ; Thu, 14 Oct 2021 03:52:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ragnatech-se.20210112.gappssmtp.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=MUFaHH4gg5sozbz20I6J7Qg54c+OLtg963wUCphPgGQ=; b=tq5Wkjl3q/Jtu0QAxrYPmQ0rvP76lyqZqJjUDk8T/CGxjmIEPswkJeWQN3gMAQuI8K 54+BM/bY8oqcMAxfaJP4n3J1hAErPUN+lsvD4VxK1CxdtefDi0W1OR/nOOi3zdJ6K4vR PM2bX69hytedAX20Rdjx0rFv7+qtmFJG1R7BHMfGa/br442QkHtT3khUKPSf4KA3iaWO VNV6loNjdZZt7WJQIyQQVNZFuCRDvbd6xzjBBfqmn72aKJWx6JCfihc1btLQQSkMlvoI vo+8a2humDFh7qwSRQFilHUWuaZ1hoTJ3TUSdyMN4WtSmd/4DVZnnJDLTFzPARxwLd1W NHuA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=MUFaHH4gg5sozbz20I6J7Qg54c+OLtg963wUCphPgGQ=; b=pb1fdgJxuJ18Zf2wxX+2NhUeGGDr/yNbZVIUPju80eZcAsCMEBAiXt0SZwh0KXx1cD P6ILtmOD6hJDGwllM/VJwvHdhoQKrFv5sNbmmvsXSFo9ZP1hXLMPA+Bi6eLTf2qXtyjL 9oSwjTNdZAjPRoGU3uOrejTKZfbdsnwBLgcIEFvffnA7VkQgQ2IPmZTqEAbzZu8HEHqy BVErs4DBFP+kTu4OteNTfqWguYKtbSBIoJSjjQ2AXVxiP8DMMhi6WDHMNu7QohBBP6Ae xxuNujKWZFkCMDKwmp/2iiY/BhjKDgQN6DvboZ+1Xnh0JVcbe1571BdJ9dUovArIZTQI 8maw== X-Gm-Message-State: AOAM532U5JwuKFxBRFEEBsu+lz1y7v5nq3PHlsgXOB1R82foYfib2Qql qy67zBRKNw/A5mi6CczrufPusw== X-Google-Smtp-Source: ABdhPJxc28Na7lOt55YnTSJbEizzROqxgVR8D05GCE61S91l3O3xkSMyytrBST00cj4PokOa5Aa9kQ== X-Received: by 2002:a1c:a401:: with SMTP id n1mr5139085wme.162.1634208765878; Thu, 14 Oct 2021 03:52:45 -0700 (PDT) Received: from bismarck.berto.se (p54ac5892.dip0.t-ipconnect.de. [84.172.88.146]) by smtp.googlemail.com with ESMTPSA id h1sm1848072wmb.7.2021.10.14.03.52.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 14 Oct 2021 03:52:45 -0700 (PDT) From: =?utf-8?q?Niklas_S=C3=B6derlund?= To: Rob Herring , Kieran Bingham , devicetree@vger.kernel.org, linux-media@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org, =?utf-8?q?Niklas_S=C3=B6derlund?= , Geert Uytterhoeven Subject: [PATCH v2] dt-bindings: adv748x: Convert bindings to json-schema Date: Thu, 14 Oct 2021 12:52:36 +0200 Message-Id: <20211014105236.1947798-1-niklas.soderlund+renesas@ragnatech.se> X-Mailer: git-send-email 2.33.0 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Convert ADV748X analog video decoder documentation to json-schema. While converting the bindings extend it to enforce that all port@n nodes shall be encapsulated inside a ports node. This change do not effect drivers parsing the ports@n nodes. Signed-off-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Reviewed-by: Kieran Bingham --- * Changes since v1 - Update commit message to mention the added ports node. Hello, This conversion revealed a problem with the Renesas DTSI files for the adv7482 nodes. A fix for that have been submitted in a separate patch, [PATCH] arm64: dts: renesas: Add ports node to all adv7482 nodes Kind Regards, Niklas Söderlund --- .../devicetree/bindings/media/i2c/adv748x.txt | 116 ---------- .../bindings/media/i2c/adv748x.yaml | 211 ++++++++++++++++++ 2 files changed, 211 insertions(+), 116 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/adv748x.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/adv748x.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt deleted file mode 100644 index 4f91686e54a6b939..0000000000000000 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ /dev/null @@ -1,116 +0,0 @@ -* Analog Devices ADV748X video decoder with HDMI receiver - -The ADV7481 and ADV7482 are multi format video decoders with an integrated -HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB -from three input sources HDMI, analog and TTL. - -Required Properties: - - - compatible: Must contain one of the following - - "adi,adv7481" for the ADV7481 - - "adi,adv7482" for the ADV7482 - - - reg: I2C slave addresses - The ADV748x has up to twelve 256-byte maps that can be accessed via the - main I2C ports. Each map has it own I2C address and acts as a standard - slave device on the I2C bus. The main address is mandatory, others are - optional and remain at default values if not specified. - -Optional Properties: - - - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or - "intrq3". All interrupts are optional. The "intrq3" interrupt - is only available on the adv7481 - - interrupts: Specify the interrupt lines for the ADV748x - - reg-names : Names of maps with programmable addresses. - It shall contain all maps needing a non-default address. - Possible map names are: - "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb" - -The device node must contain one 'port' child node per device input and output -port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows. - - Name Type Port - --------------------------------------- - AIN0 sink 0 - AIN1 sink 1 - AIN2 sink 2 - AIN3 sink 3 - AIN4 sink 4 - AIN5 sink 5 - AIN6 sink 6 - AIN7 sink 7 - HDMI sink 8 - TTL sink 9 - TXA source 10 - TXB source 11 - -The digital output port nodes, when present, shall contain at least one -endpoint. Each of those endpoints shall contain the data-lanes property as -described in video-interfaces.txt. - -Required source endpoint properties: - - data-lanes: an array of physical data lane indexes - The accepted value(s) for this property depends on which of the two - sources are described. For TXA 1, 2 or 4 data lanes can be described - while for TXB only 1 data lane is valid. See video-interfaces.txt - for detailed description. - -Ports are optional if they are not connected to anything at the hardware level. - -Example: - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70 0x71 0x72 0x73 0x74 0x75 - 0x60 0x61 0x62 0x63 0x64 0x65>; - reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb"; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio6>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>, - <31 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_in>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - - port@b { - reg = <11>; - - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml new file mode 100644 index 0000000000000000..37df0441d8790c6e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV748X video decoder with HDMI receiver + +maintainers: + - Kieran Bingham + +description: + The ADV7481 and ADV7482 are multi format video decoders with an integrated + HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB + from three input sources HDMI, analog and TTL. + +properties: + compatible: + items: + - enum: + - adi,adv7481 + - adi,adv7482 + + reg: + minItems: 1 + maxItems: 12 + description: + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and remain at default values if not specified. + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + + interrupts: true + + interrupt-names: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port@[0-7]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port nodes for analog inputs AIN[0-7]. + + properties: + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for HDMI. + + port@9: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for TTL. + + port@a: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXA. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@b: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXB. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7481 + then: + properties: + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + items: + - enum: [ intrq1, intrq2, intrq3 ] + - enum: [ intrq1, intrq2, intrq3 ] + - enum: [ intrq1, intrq2, intrq3 ] + else: + properties: + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [ intrq1, intrq2 ] + - enum: [ intrq1, intrq2 ] + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; + + interrupt-parent = <&gpio6>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intrq1", "intrq2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@b { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; + }; + };