From patchwork Fri Feb 25 13:01:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nuno Sa X-Patchwork-Id: 12760207 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CB7F9C433FE for ; Fri, 25 Feb 2022 13:02:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237490AbiBYNCl (ORCPT ); Fri, 25 Feb 2022 08:02:41 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53644 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235433AbiBYNCk (ORCPT ); Fri, 25 Feb 2022 08:02:40 -0500 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 651CC18BA71; Fri, 25 Feb 2022 05:02:07 -0800 (PST) Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.1.2/8.16.1.2) with ESMTP id 21P66BcG002701; Fri, 25 Feb 2022 08:01:47 -0500 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3eesj39j6n-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 25 Feb 2022 08:01:47 -0500 Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 21PD1kTQ013403 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 25 Feb 2022 08:01:46 -0500 Received: from ASHBCASHYB5.ad.analog.com (10.64.17.133) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 25 Feb 2022 08:01:45 -0500 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBCASHYB5.ad.analog.com (10.64.17.133) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 25 Feb 2022 08:01:44 -0500 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Fri, 25 Feb 2022 08:01:44 -0500 Received: from NSA-L01.ad.analog.com ([10.32.224.71]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 21PD1WL2024659; Fri, 25 Feb 2022 08:01:38 -0500 From: =?utf-8?q?Nuno_S=C3=A1?= To: , CC: Rob Herring , Jonathan Cameron , Lars-Peter Clausen , Michael Hennerich Subject: [PATCH v4 1/3] iio: dac: add support for ltc2688 Date: Fri, 25 Feb 2022 14:01:27 +0100 Message-ID: <20220225130129.69-2-nuno.sa@analog.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220225130129.69-1-nuno.sa@analog.com> References: <20220225130129.69-1-nuno.sa@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: p7s7yMm8_aQc8AkAij0-Cmf9Wxzi-B-l X-Proofpoint-ORIG-GUID: p7s7yMm8_aQc8AkAij0-Cmf9Wxzi-B-l X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.816,Hydra:6.0.425,FMLib:17.11.64.514 definitions=2022-02-25_07,2022-02-25_01,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 clxscore=1015 priorityscore=1501 impostorscore=0 lowpriorityscore=0 malwarescore=0 mlxlogscore=999 suspectscore=0 mlxscore=0 spamscore=0 bulkscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2201110000 definitions=main-2202250074 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org The LTC2688 is a 16 channel, 16 bit, +-15V DAC with an integrated precision reference. It is guaranteed monotonic and has built in rail-to-rail output buffers that can source or sink up to 20 mA. Signed-off-by: Nuno Sá --- MAINTAINERS | 7 + drivers/iio/dac/Kconfig | 11 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ltc2688.c | 1071 +++++++++++++++++++++++++++++++++++++ 4 files changed, 1090 insertions(+) create mode 100644 drivers/iio/dac/ltc2688.c diff --git a/MAINTAINERS b/MAINTAINERS index 96e9243f0242..6fc957727094 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11309,6 +11309,13 @@ S: Maintained F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml F: drivers/iio/dac/ltc1660.c +LTC2688 IIO DAC DRIVER +M: Nuno Sá +L: linux-iio@vger.kernel.org +S: Supported +W: http://ez.analog.com/community/linux-device-drivers +F: drivers/iio/dac/ltc2688.c + LTC2947 HARDWARE MONITOR DRIVER M: Nuno Sá L: linux-hwmon@vger.kernel.org diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index bfcf7568de32..c0bf0d84197f 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -131,6 +131,17 @@ config AD5624R_SPI Say yes here to build support for Analog Devices AD5624R, AD5644R and AD5664R converters (DAC). This driver uses the common SPI interface. +config LTC2688 + tristate "Analog Devices LTC2688 DAC spi driver" + depends on SPI + select REGMAP + help + Say yes here to build support for Analog Devices + LTC2688 converters (DAC). + + To compile this driver as a module, choose M here: the + module will be called ltc2688. + config AD5686 tristate diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 01a50131572f..ec3e42713f00 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_DS4424) += ds4424.o obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o obj-$(CONFIG_LTC1660) += ltc1660.o obj-$(CONFIG_LTC2632) += ltc2632.o +obj-$(CONFIG_LTC2688) += ltc2688.o obj-$(CONFIG_M62332) += m62332.o obj-$(CONFIG_MAX517) += max517.o obj-$(CONFIG_MAX5821) += max5821.o diff --git a/drivers/iio/dac/ltc2688.c b/drivers/iio/dac/ltc2688.c new file mode 100644 index 000000000000..e41861d29767 --- /dev/null +++ b/drivers/iio/dac/ltc2688.c @@ -0,0 +1,1071 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LTC2688 16 channel, 16 bit Voltage Output SoftSpan DAC driver + * + * Copyright 2022 Analog Devices Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LTC2688_DAC_CHANNELS 16 + +#define LTC2688_CMD_CH_CODE(x) (0x00 + (x)) +#define LTC2688_CMD_CH_SETTING(x) (0x10 + (x)) +#define LTC2688_CMD_CH_OFFSET(x) (0X20 + (x)) +#define LTC2688_CMD_CH_GAIN(x) (0x30 + (x)) +#define LTC2688_CMD_CH_CODE_UPDATE(x) (0x40 + (x)) + +#define LTC2688_CMD_CONFIG 0x70 +#define LTC2688_CMD_POWERDOWN 0x71 +#define LTC2688_CMD_A_B_SELECT 0x72 +#define LTC2688_CMD_SW_TOGGLE 0x73 +#define LTC2688_CMD_TOGGLE_DITHER_EN 0x74 +#define LTC2688_CMD_THERMAL_STAT 0x77 +#define LTC2688_CMD_UPDATE_ALL 0x7C +#define LTC2688_CMD_NOOP 0xFF + +#define LTC2688_READ_OPERATION 0x80 + +/* Channel Settings */ +#define LTC2688_CH_SPAN_MSK GENMASK(2, 0) +#define LTC2688_CH_OVERRANGE_MSK BIT(3) +#define LTC2688_CH_TD_SEL_MSK GENMASK(5, 4) +#define LTC2688_CH_TGP_MAX 3 +#define LTC2688_CH_DIT_PER_MSK GENMASK(8, 6) +#define LTC2688_CH_DIT_PH_MSK GENMASK(10, 9) +#define LTC2688_CH_MODE_MSK BIT(11) + +#define LTC2688_DITHER_RAW_MASK GENMASK(15, 2) +#define LTC2688_CH_CALIBBIAS_MASK GENMASK(15, 2) +#define LTC2688_DITHER_RAW_MAX_VAL (BIT(14) - 1) +#define LTC2688_CH_CALIBBIAS_MAX_VAL (BIT(14) - 1) + +/* Configuration register */ +#define LTC2688_CONFIG_RST BIT(15) +#define LTC2688_CONFIG_EXT_REF BIT(1) + +#define LTC2688_DITHER_FREQ_AVAIL_N 5 + +enum { + LTC2688_SPAN_RANGE_0V_5V, + LTC2688_SPAN_RANGE_0V_10V, + LTC2688_SPAN_RANGE_M5V_5V, + LTC2688_SPAN_RANGE_M10V_10V, + LTC2688_SPAN_RANGE_M15V_15V, + LTC2688_SPAN_RANGE_MAX +}; + +enum { + LTC2688_MODE_DEFAULT, + LTC2688_MODE_DITHER_TOGGLE, +}; + +struct ltc2688_chan { + long dither_frequency[LTC2688_DITHER_FREQ_AVAIL_N]; + bool overrange; + bool toggle_chan; + u8 mode; +}; + +struct ltc2688_state { + struct spi_device *spi; + struct regmap *regmap; + struct regulator_bulk_data regulators[2]; + struct ltc2688_chan channels[LTC2688_DAC_CHANNELS]; + struct iio_chan_spec *iio_chan; + /* lock to protect against multiple access to the device and shared data */ + struct mutex lock; + int vref; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u8 tx_data[6] ____cacheline_aligned; + u8 rx_data[3]; +}; + +static int ltc2688_spi_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct ltc2688_state *st = context; + struct spi_transfer xfers[] = { + { + .tx_buf = st->tx_data, + .bits_per_word = 8, + .len = reg_size + val_size, + .cs_change = 1, + }, { + .tx_buf = st->tx_data + 3, + .rx_buf = st->rx_data, + .bits_per_word = 8, + .len = reg_size + val_size, + }, + }; + int ret; + + memcpy(st->tx_data, reg, reg_size); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + if (ret) + return ret; + + memcpy(val, &st->rx_data[1], val_size); + + return 0; +} + +static int ltc2688_spi_write(void *context, const void *data, size_t count) +{ + struct ltc2688_state *st = context; + + return spi_write(st->spi, data, count); +} + +static int ltc2688_span_get(const struct ltc2688_state *st, int c) +{ + int ret, reg, span; + + ret = regmap_read(st->regmap, LTC2688_CMD_CH_SETTING(c), ®); + if (ret) + return ret; + + span = FIELD_GET(LTC2688_CH_SPAN_MSK, reg); + /* sanity check to make sure we don't get any weird value from the HW */ + if (span >= LTC2688_SPAN_RANGE_MAX) + return -EIO; + + return span; +} + +static const int ltc2688_span_helper[LTC2688_SPAN_RANGE_MAX][2] = { + {0, 5000}, {0, 10000}, {-5000, 5000}, {-10000, 10000}, {-15000, 15000}, +}; + +static int ltc2688_scale_get(const struct ltc2688_state *st, int c, int *val) +{ + const struct ltc2688_chan *chan = &st->channels[c]; + int span, fs; + + span = ltc2688_span_get(st, c); + if (span < 0) + return span; + + fs = ltc2688_span_helper[span][1] - ltc2688_span_helper[span][0]; + if (chan->overrange) + fs = mult_frac(fs, 105, 100); + + *val = DIV_ROUND_CLOSEST(fs * st->vref, 4096); + + return 0; +} + +static int ltc2688_offset_get(const struct ltc2688_state *st, int c, int *val) +{ + int span; + + span = ltc2688_span_get(st, c); + if (span < 0) + return span; + + if (ltc2688_span_helper[span][0] < 0) + *val = -32768; + else + *val = 0; + + return 0; +} + +enum { + LTC2688_INPUT_A, + LTC2688_INPUT_B, + LTC2688_INPUT_B_AVAIL, + LTC2688_DITHER_OFF, + LTC2688_DITHER_FREQ_AVAIL, +}; + +static int ltc2688_dac_code_write(struct ltc2688_state *st, u32 chan, u32 input, + u16 code) +{ + struct ltc2688_chan *c = &st->channels[chan]; + int ret, reg; + + /* 2 LSBs set to 0 if writing dither amplitude */ + if (!c->toggle_chan && input == LTC2688_INPUT_B) { + if (code > LTC2688_DITHER_RAW_MAX_VAL) + return -EINVAL; + + code = FIELD_PREP(LTC2688_DITHER_RAW_MASK, code); + } + + mutex_lock(&st->lock); + /* select the correct input register to read from */ + ret = regmap_update_bits(st->regmap, LTC2688_CMD_A_B_SELECT, BIT(chan), + input << chan); + if (ret) + goto out_unlock; + + /* + * If in dither/toggle mode the dac should be updated by an + * external signal (or sw toggle) and not here. + */ + if (c->mode == LTC2688_MODE_DEFAULT) + reg = LTC2688_CMD_CH_CODE_UPDATE(chan); + else + reg = LTC2688_CMD_CH_CODE(chan); + + ret = regmap_write(st->regmap, reg, code); +out_unlock: + mutex_unlock(&st->lock); + return ret; +} + +static int ltc2688_dac_code_read(struct ltc2688_state *st, u32 chan, u32 input, + u32 *code) +{ + struct ltc2688_chan *c = &st->channels[chan]; + int ret; + + mutex_lock(&st->lock); + ret = regmap_update_bits(st->regmap, LTC2688_CMD_A_B_SELECT, BIT(chan), + input << chan); + if (ret) + goto out_unlock; + + ret = regmap_read(st->regmap, LTC2688_CMD_CH_CODE(chan), code); +out_unlock: + mutex_unlock(&st->lock); + + if (!c->toggle_chan && input == LTC2688_INPUT_B) + *code = FIELD_GET(LTC2688_DITHER_RAW_MASK, *code); + + return ret; +} + +static const int ltc2688_raw_range[] = {0, 1, U16_MAX}; + +static int ltc2688_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) +{ + switch (info) { + case IIO_CHAN_INFO_RAW: + *vals = ltc2688_raw_range; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } +} + +static int ltc2688_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long info) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_RAW: + ret = ltc2688_dac_code_read(st, chan->channel, LTC2688_INPUT_A, + val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + ret = ltc2688_offset_get(st, chan->channel, val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = ltc2688_scale_get(st, chan->channel, val); + if (ret) + return ret; + + *val = 16; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_read(st->regmap, + LTC2688_CMD_CH_OFFSET(chan->channel), val); + if (ret) + return ret; + + *val = FIELD_GET(LTC2688_CH_CALIBBIAS_MASK, *val); + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + ret = regmap_read(st->regmap, + LTC2688_CMD_CH_GAIN(chan->channel), val); + if (ret) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ltc2688_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long info) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_RAW: + if (val > U16_MAX || val < 0) + return -EINVAL; + + return ltc2688_dac_code_write(st, chan->channel, + LTC2688_INPUT_A, val); + case IIO_CHAN_INFO_CALIBBIAS: + if (val > LTC2688_CH_CALIBBIAS_MAX_VAL) + return -EINVAL; + + return regmap_write(st->regmap, + LTC2688_CMD_CH_OFFSET(chan->channel), + FIELD_PREP(LTC2688_CH_CALIBBIAS_MASK, val)); + case IIO_CHAN_INFO_CALIBSCALE: + return regmap_write(st->regmap, + LTC2688_CMD_CH_GAIN(chan->channel), val); + default: + return -EINVAL; + } +} + +static ssize_t ltc2688_dither_toggle_set(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + struct ltc2688_chan *c = &st->channels[chan->channel]; + int ret; + bool en; + + ret = kstrtobool(buf, &en); + if (ret) + return ret; + + mutex_lock(&st->lock); + ret = regmap_update_bits(st->regmap, LTC2688_CMD_TOGGLE_DITHER_EN, + BIT(chan->channel), en << chan->channel); + if (ret) + goto out_unlock; + + c->mode = en ? LTC2688_MODE_DITHER_TOGGLE : LTC2688_MODE_DEFAULT; +out_unlock: + mutex_unlock(&st->lock); + + return ret ?: len; +} + +static ssize_t ltc2688_reg_bool_get(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + const struct ltc2688_state *st = iio_priv(indio_dev); + int ret; + u32 val; + + ret = regmap_read(st->regmap, private, &val); + if (ret) + return ret; + + return sysfs_emit(buf, "%u\n", !!(val & BIT(chan->channel))); +} + +static ssize_t ltc2688_reg_bool_set(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + const struct ltc2688_state *st = iio_priv(indio_dev); + int ret; + bool en; + + ret = kstrtobool(buf, &en); + if (ret) + return ret; + + ret = regmap_update_bits(st->regmap, private, BIT(chan->channel), + en << chan->channel); + if (ret) + return ret; + + return len; +} + +static ssize_t ltc2688_dither_freq_avail(const struct ltc2688_state *st, + const struct ltc2688_chan *chan, + char *buf) +{ + int sz = 0; + u32 f; + + for (f = 0; f < ARRAY_SIZE(chan->dither_frequency); f++) + sz += sysfs_emit_at(buf, sz, "%ld ", chan->dither_frequency[f]); + + buf[sz - 1] = '\n'; + + return sz; +} + +static ssize_t ltc2688_dither_freq_get(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + const struct ltc2688_state *st = iio_priv(indio_dev); + const struct ltc2688_chan *c = &st->channels[chan->channel]; + u32 reg, freq; + int ret; + + if (private == LTC2688_DITHER_FREQ_AVAIL) + return ltc2688_dither_freq_avail(st, c, buf); + + ret = regmap_read(st->regmap, LTC2688_CMD_CH_SETTING(chan->channel), + ®); + if (ret) + return ret; + + freq = FIELD_GET(LTC2688_CH_DIT_PER_MSK, reg); + if (freq >= ARRAY_SIZE(c->dither_frequency)) + return -EIO; + + return sysfs_emit(buf, "%ld\n", c->dither_frequency[freq]); +} + +static ssize_t ltc2688_dither_freq_set(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + const struct ltc2688_state *st = iio_priv(indio_dev); + const struct ltc2688_chan *c = &st->channels[chan->channel]; + long val; + u32 freq; + int ret; + + if (private == LTC2688_DITHER_FREQ_AVAIL) + return -EINVAL; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + for (freq = 0; freq < ARRAY_SIZE(c->dither_frequency); freq++) { + if (val == c->dither_frequency[freq]) + break; + } + + if (freq == ARRAY_SIZE(c->dither_frequency)) + return -EINVAL; + + ret = regmap_update_bits(st->regmap, + LTC2688_CMD_CH_SETTING(chan->channel), + LTC2688_CH_DIT_PER_MSK, + FIELD_PREP(LTC2688_CH_DIT_PER_MSK, freq)); + if (ret) + return ret; + + return len; +} + +static ssize_t ltc2688_dac_input_read(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + int ret; + u32 val; + + if (private == LTC2688_INPUT_B_AVAIL) + return sysfs_emit(buf, "[%u %u %u]\n", ltc2688_raw_range[0], + ltc2688_raw_range[1], + ltc2688_raw_range[2] / 4); + + if (private == LTC2688_DITHER_OFF) + return sysfs_emit(buf, "0\n"); + + ret = ltc2688_dac_code_read(st, chan->channel, private, &val); + if (ret) + return ret; + + return sysfs_emit(buf, "%u\n", val); +} + +static ssize_t ltc2688_dac_input_write(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + int ret; + u16 val; + + if (private == LTC2688_INPUT_B_AVAIL || private == LTC2688_DITHER_OFF) + return -EINVAL; + + ret = kstrtou16(buf, 10, &val); + if (ret) + return ret; + + ret = ltc2688_dac_code_write(st, chan->channel, private, val); + if (ret) + return ret; + + return len; +} + +static int ltc2688_get_dither_phase(struct iio_dev *dev, + const struct iio_chan_spec *chan) +{ + struct ltc2688_state *st = iio_priv(dev); + int ret, regval; + + ret = regmap_read(st->regmap, LTC2688_CMD_CH_SETTING(chan->channel), + ®val); + if (ret) + return ret; + + return FIELD_GET(LTC2688_CH_DIT_PH_MSK, regval); +} + +static int ltc2688_set_dither_phase(struct iio_dev *dev, + const struct iio_chan_spec *chan, + unsigned int phase) +{ + struct ltc2688_state *st = iio_priv(dev); + + return regmap_update_bits(st->regmap, + LTC2688_CMD_CH_SETTING(chan->channel), + LTC2688_CH_DIT_PH_MSK, + FIELD_PREP(LTC2688_CH_DIT_PH_MSK, phase)); +} + +static int ltc2688_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int writeval, + unsigned int *readval) +{ + struct ltc2688_state *st = iio_priv(indio_dev); + + if (readval) + return regmap_read(st->regmap, reg, readval); + + return regmap_write(st->regmap, reg, writeval); +} + +static const char * const ltc2688_dither_phase[] = { + "0", "1.5708", "3.14159", "4.71239", +}; + +static const struct iio_enum ltc2688_dither_phase_enum = { + .items = ltc2688_dither_phase, + .num_items = ARRAY_SIZE(ltc2688_dither_phase), + .set = ltc2688_set_dither_phase, + .get = ltc2688_get_dither_phase, +}; + +#define LTC2688_CHAN_EXT_INFO(_name, _what, _shared, _read, _write) { \ + .name = _name, \ + .read = (_read), \ + .write = (_write), \ + .private = (_what), \ + .shared = (_shared), \ +} + +/* + * For toggle mode we only expose the symbol attr (sw_toggle) in case a TGPx is + * not provided in dts. + */ +static const struct iio_chan_spec_ext_info ltc2688_toggle_sym_ext_info[] = { + LTC2688_CHAN_EXT_INFO("raw0", LTC2688_INPUT_A, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("raw1", LTC2688_INPUT_B, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("toggle_en", LTC2688_CMD_TOGGLE_DITHER_EN, + IIO_SEPARATE, ltc2688_reg_bool_get, + ltc2688_dither_toggle_set), + LTC2688_CHAN_EXT_INFO("powerdown", LTC2688_CMD_POWERDOWN, IIO_SEPARATE, + ltc2688_reg_bool_get, ltc2688_reg_bool_set), + LTC2688_CHAN_EXT_INFO("symbol", LTC2688_CMD_SW_TOGGLE, IIO_SEPARATE, + ltc2688_reg_bool_get, ltc2688_reg_bool_set), + {} +}; + +static const struct iio_chan_spec_ext_info ltc2688_toggle_ext_info[] = { + LTC2688_CHAN_EXT_INFO("raw0", LTC2688_INPUT_A, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("raw1", LTC2688_INPUT_B, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("toggle_en", LTC2688_CMD_TOGGLE_DITHER_EN, + IIO_SEPARATE, ltc2688_reg_bool_get, + ltc2688_dither_toggle_set), + LTC2688_CHAN_EXT_INFO("powerdown", LTC2688_CMD_POWERDOWN, IIO_SEPARATE, + ltc2688_reg_bool_get, ltc2688_reg_bool_set), + {} +}; + +static struct iio_chan_spec_ext_info ltc2688_dither_ext_info[] = { + LTC2688_CHAN_EXT_INFO("dither_raw", LTC2688_INPUT_B, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("dither_raw_available", LTC2688_INPUT_B_AVAIL, + IIO_SEPARATE, ltc2688_dac_input_read, + ltc2688_dac_input_write), + LTC2688_CHAN_EXT_INFO("dither_offset", LTC2688_DITHER_OFF, IIO_SEPARATE, + ltc2688_dac_input_read, ltc2688_dac_input_write), + /* + * Not IIO_ENUM because the available freq needs to be computed at + * probe. We could still use it, but it didn't felt much right. + */ + LTC2688_CHAN_EXT_INFO("dither_frequency", 0, IIO_SEPARATE, + ltc2688_dither_freq_get, ltc2688_dither_freq_set), + LTC2688_CHAN_EXT_INFO("dither_frequency_available", + LTC2688_DITHER_FREQ_AVAIL, IIO_SEPARATE, + ltc2688_dither_freq_get, ltc2688_dither_freq_set), + IIO_ENUM("dither_phase", IIO_SEPARATE, <c2688_dither_phase_enum), + IIO_ENUM_AVAILABLE("dither_phase", IIO_SEPARATE, + <c2688_dither_phase_enum), + LTC2688_CHAN_EXT_INFO("dither_en", LTC2688_CMD_TOGGLE_DITHER_EN, + IIO_SEPARATE, ltc2688_reg_bool_get, + ltc2688_dither_toggle_set), + LTC2688_CHAN_EXT_INFO("powerdown", LTC2688_CMD_POWERDOWN, IIO_SEPARATE, + ltc2688_reg_bool_get, ltc2688_reg_bool_set), + {} +}; + +static const struct iio_chan_spec_ext_info ltc2688_ext_info[] = { + LTC2688_CHAN_EXT_INFO("powerdown", LTC2688_CMD_POWERDOWN, IIO_SEPARATE, + ltc2688_reg_bool_get, ltc2688_reg_bool_set), + {} +}; + +#define LTC2688_CHANNEL(_chan) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .output = 1, \ + .channel = (_chan), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_CALIBSCALE) | \ + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), \ + .ext_info = ltc2688_ext_info, \ +} + +static const struct iio_chan_spec ltc2688_channels[] = { + LTC2688_CHANNEL(0), + LTC2688_CHANNEL(1), + LTC2688_CHANNEL(2), + LTC2688_CHANNEL(3), + LTC2688_CHANNEL(4), + LTC2688_CHANNEL(5), + LTC2688_CHANNEL(6), + LTC2688_CHANNEL(7), + LTC2688_CHANNEL(8), + LTC2688_CHANNEL(9), + LTC2688_CHANNEL(10), + LTC2688_CHANNEL(11), + LTC2688_CHANNEL(12), + LTC2688_CHANNEL(13), + LTC2688_CHANNEL(14), + LTC2688_CHANNEL(15), +}; + +static void ltc2688_clk_disable(void *clk) +{ + clk_disable_unprepare(clk); +} + +static const int ltc2688_period[LTC2688_DITHER_FREQ_AVAIL_N] = { + 4, 8, 16, 32, 64, +}; + +static int ltc2688_tgp_clk_setup(struct ltc2688_state *st, + struct ltc2688_chan *chan, + struct fwnode_handle *node, int tgp) +{ + unsigned long rate; + struct clk *clk; + int ret, f; + + clk = devm_get_clk_from_child(&st->spi->dev, to_of_node(node), NULL); + if (IS_ERR(clk)) + return dev_err_probe(&st->spi->dev, PTR_ERR(clk), + "failed to get tgp clk.\n"); + + ret = clk_prepare_enable(clk); + if (ret) + return dev_err_probe(&st->spi->dev, ret, + "failed to enable tgp clk.\n"); + + ret = devm_add_action_or_reset(&st->spi->dev, ltc2688_clk_disable, clk); + if (ret) + return ret; + + if (chan->toggle_chan) + return 0; + + /* calculate available dither frequencies */ + rate = clk_get_rate(clk); + for (f = 0; f < ARRAY_SIZE(chan->dither_frequency); f++) + chan->dither_frequency[f] = DIV_ROUND_CLOSEST(rate, ltc2688_period[f]); + + return 0; +} + +static int ltc2688_span_lookup(const struct ltc2688_state *st, int min, int max) +{ + u32 span; + + for (span = 0; span < ARRAY_SIZE(ltc2688_span_helper); span++) { + if (min == ltc2688_span_helper[span][0] && + max == ltc2688_span_helper[span][1]) + return span; + } + + return -EINVAL; +} + +static int ltc2688_channel_config(struct ltc2688_state *st) +{ + struct device *dev = &st->spi->dev; + struct fwnode_handle *child; + u32 reg, clk_input, val, tmp[2]; + int ret, span; + + device_for_each_child_node(dev, child) { + struct ltc2688_chan *chan; + + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, + "Failed to get reg property\n"); + } + + if (reg >= LTC2688_DAC_CHANNELS) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, + "reg bigger than: %d\n", + LTC2688_DAC_CHANNELS); + } + + val = 0; + chan = &st->channels[reg]; + if (fwnode_property_read_bool(child, "adi,toggle-mode")) { + chan->toggle_chan = true; + /* assume sw toggle ABI */ + st->iio_chan[reg].ext_info = ltc2688_toggle_sym_ext_info; + /* + * Clear IIO_CHAN_INFO_RAW bit as toggle channels expose + * out_voltage_raw{0|1} files. + */ + __clear_bit(IIO_CHAN_INFO_RAW, + &st->iio_chan[reg].info_mask_separate); + } + + ret = fwnode_property_read_u32_array(child, "adi,output-range-microvolt", + tmp, ARRAY_SIZE(tmp)); + if (!ret) { + span = ltc2688_span_lookup(st, (int)tmp[0] / 1000, + tmp[1] / 1000); + if (span < 0) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, + "output range not valid:[%d %d]\n", + tmp[0], tmp[1]); + } + + val |= FIELD_PREP(LTC2688_CH_SPAN_MSK, span); + } + + ret = fwnode_property_read_u32(child, "adi,toggle-dither-input", + &clk_input); + if (!ret) { + if (clk_input >= LTC2688_CH_TGP_MAX) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, + "toggle-dither-input inv value(%d)\n", + clk_input); + } + + ret = ltc2688_tgp_clk_setup(st, chan, child, clk_input); + if (ret) { + fwnode_handle_put(child); + return ret; + } + + /* + * 0 means software toggle which is the default mode. + * Hence the +1. + */ + val |= FIELD_PREP(LTC2688_CH_TD_SEL_MSK, clk_input + 1); + + /* + * If a TGPx is given, we automatically assume a dither + * capable channel (unless toggle is already enabled). + * On top of this we just set here the dither bit in the + * channel settings. It won't have any effect until the + * global toggle/dither bit is enabled. + */ + if (!chan->toggle_chan) { + val |= FIELD_PREP(LTC2688_CH_MODE_MSK, 1); + st->iio_chan[reg].ext_info = ltc2688_dither_ext_info; + } else { + /* wait, no sw toggle after all */ + st->iio_chan[reg].ext_info = ltc2688_toggle_ext_info; + } + } + + if (fwnode_property_read_bool(child, "adi,overrange")) { + chan->overrange = true; + val |= LTC2688_CH_OVERRANGE_MSK; + } + + if (!val) + continue; + + ret = regmap_write(st->regmap, LTC2688_CMD_CH_SETTING(reg), + val); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, + "failed to set chan settings\n"); + } + } + + return 0; +} + +static int ltc2688_setup(struct ltc2688_state *st, struct regulator *vref) +{ + struct gpio_desc *gpio; + int ret; + + /* + * If we have a reset pin, use that to reset the board, If not, use + * the reset bit. + */ + gpio = devm_gpiod_get_optional(&st->spi->dev, "clr", GPIOD_OUT_HIGH); + if (IS_ERR(gpio)) + return dev_err_probe(&st->spi->dev, PTR_ERR(gpio), + "Failed to get reset gpio"); + if (gpio) { + usleep_range(1000, 1200); + /* bring device out of reset */ + gpiod_set_value_cansleep(gpio, 0); + } else { + ret = regmap_update_bits(st->regmap, LTC2688_CMD_CONFIG, + LTC2688_CONFIG_RST, + LTC2688_CONFIG_RST); + if (ret) + return ret; + } + + usleep_range(10000, 12000); + + /* + * Duplicate the default channel configuration as it can change during + * @ltc2688_channel_config() + */ + st->iio_chan = devm_kmemdup(&st->spi->dev, ltc2688_channels, + sizeof(ltc2688_channels), GFP_KERNEL); + if (!st->iio_chan) + return -ENOMEM; + + ret = ltc2688_channel_config(st); + if (ret) + return ret; + + if (!vref) + return 0; + + return regmap_set_bits(st->regmap, LTC2688_CMD_CONFIG, + LTC2688_CONFIG_EXT_REF); +} + +static void ltc2688_disable_regulators(void *data) +{ + struct ltc2688_state *st = data; + + regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators); +} + +static void ltc2688_disable_regulator(void *regulator) +{ + regulator_disable(regulator); +} + +static bool ltc2688_reg_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC2688_CMD_CH_CODE(0) ... LTC2688_CMD_CH_GAIN(15): + return true; + case LTC2688_CMD_CONFIG ... LTC2688_CMD_THERMAL_STAT: + return true; + default: + return false; + } +} + +static bool ltc2688_reg_writable(struct device *dev, unsigned int reg) +{ + /* + * There's a jump from 0x76 to 0x78 in the write codes and the thermal + * status code is 0x77 (which is read only) so that we need to check + * that special condition. + */ + if (reg <= LTC2688_CMD_UPDATE_ALL && reg != LTC2688_CMD_THERMAL_STAT) + return true; + + return false; +} + +static struct regmap_bus ltc2688_regmap_bus = { + .read = ltc2688_spi_read, + .write = ltc2688_spi_write, + .read_flag_mask = LTC2688_READ_OPERATION, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static const struct regmap_config ltc2688_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .readable_reg = ltc2688_reg_readable, + .writeable_reg = ltc2688_reg_writable, + /* ignoring the no op command */ + .max_register = LTC2688_CMD_UPDATE_ALL, +}; + +static const struct iio_info ltc2688_info = { + .write_raw = ltc2688_write_raw, + .read_raw = ltc2688_read_raw, + .read_avail = ltc2688_read_avail, + .debugfs_reg_access = ltc2688_reg_access, +}; + +static int ltc2688_probe(struct spi_device *spi) +{ + struct ltc2688_state *st; + struct iio_dev *indio_dev; + struct regulator *vref_reg; + struct device *dev = &spi->dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->spi = spi; + + /* Just write this once. No need to do it in every regmap read. */ + st->tx_data[3] = LTC2688_CMD_NOOP; + mutex_init(&st->lock); + + st->regmap = devm_regmap_init(dev, <c2688_regmap_bus, st, + <c2688_regmap_config); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "Failed to init regmap"); + + st->regulators[0].supply = "vcc"; + st->regulators[1].supply = "iovcc"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators), + st->regulators); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable regulators\n"); + + ret = devm_add_action_or_reset(dev, ltc2688_disable_regulators, st); + if (ret) + return ret; + + vref_reg = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(vref_reg)) { + if (PTR_ERR(vref_reg) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(vref_reg), + "Failed to get vref regulator"); + + vref_reg = NULL; + /* internal reference */ + st->vref = 4096; + } else { + ret = regulator_enable(vref_reg); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable vref regulators\n"); + + ret = devm_add_action_or_reset(dev, ltc2688_disable_regulator, + vref_reg); + if (ret) + return ret; + + ret = regulator_get_voltage(vref_reg); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get vref\n"); + + st->vref = ret / 1000; + } + + ret = ltc2688_setup(st, vref_reg); + if (ret) + return ret; + + indio_dev->name = "ltc2688"; + indio_dev->info = <c2688_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = st->iio_chan; + indio_dev->num_channels = ARRAY_SIZE(ltc2688_channels); + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id ltc2688_of_id[] = { + { .compatible = "adi,ltc2688" }, + {} +}; +MODULE_DEVICE_TABLE(of, ltc2688_of_id); + +static const struct spi_device_id ltc2688_id[] = { + { "ltc2688" }, + {} +}; +MODULE_DEVICE_TABLE(spi, ltc2688_id); + +static struct spi_driver ltc2688_driver = { + .driver = { + .name = "ltc2688", + .of_match_table = ltc2688_of_id, + }, + .probe = ltc2688_probe, + .id_table = ltc2688_id, +}; +module_spi_driver(ltc2688_driver); + +MODULE_AUTHOR("Nuno Sá "); +MODULE_DESCRIPTION("Analog Devices LTC2688 DAC"); +MODULE_LICENSE("GPL"); From patchwork Fri Feb 25 13:01:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nuno Sa X-Patchwork-Id: 12760205 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1EEB4C4332F for ; Fri, 25 Feb 2022 13:02:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234738AbiBYNCk (ORCPT ); Fri, 25 Feb 2022 08:02:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53546 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235433AbiBYNCj (ORCPT ); Fri, 25 Feb 2022 08:02:39 -0500 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7898318F23F; Fri, 25 Feb 2022 05:02:07 -0800 (PST) Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.1.2/8.16.1.2) with ESMTP id 21P6t5q5018881; Fri, 25 Feb 2022 08:01:48 -0500 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3eet8yhbpj-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 25 Feb 2022 08:01:48 -0500 Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 21PD1lae013409 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 25 Feb 2022 08:01:47 -0500 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 25 Feb 2022 08:01:46 -0500 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Fri, 25 Feb 2022 08:01:46 -0500 Received: from NSA-L01.ad.analog.com ([10.32.224.71]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 21PD1WL3024659; Fri, 25 Feb 2022 08:01:40 -0500 From: =?utf-8?q?Nuno_S=C3=A1?= To: , CC: Rob Herring , Jonathan Cameron , Lars-Peter Clausen , Michael Hennerich Subject: [PATCH v4 2/3] iio: ABI: add ABI file for the LTC2688 DAC Date: Fri, 25 Feb 2022 14:01:28 +0100 Message-ID: <20220225130129.69-3-nuno.sa@analog.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220225130129.69-1-nuno.sa@analog.com> References: <20220225130129.69-1-nuno.sa@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: seg4DSAbuONjv8nHeCtAFjSqSLKsOuMZ X-Proofpoint-ORIG-GUID: seg4DSAbuONjv8nHeCtAFjSqSLKsOuMZ X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.816,Hydra:6.0.425,FMLib:17.11.64.514 definitions=2022-02-25_07,2022-02-25_01,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 impostorscore=0 spamscore=0 suspectscore=0 adultscore=0 lowpriorityscore=2 priorityscore=1501 bulkscore=2 phishscore=0 malwarescore=0 mlxlogscore=867 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2201110000 definitions=main-2202250074 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Define the sysfs interface for toggle or dither capable channels. Dither capable channels will have the extended interface: * out_voltageY_dither_en * out_voltageY_dither_raw * out_voltageY_dither_offset * out_voltageY_dither_raw_available * out_voltageY_dither_frequency * out_voltageY_dither_frequency_available * out_voltageY_dither_phase * out_voltageY_dither_phase_available Toggle enabled channels will have: * out_voltageY_toggle_en * out_voltageY_raw0 * out_voltageY_raw1 * out_voltageY_symbol The common interface present in all channels is: * out_voltageY_raw (not present in toggle enabled channels) * out_voltageY_raw_available * out_voltageY_powerdown * out_voltageY_scale * out_voltageY_offset * out_voltageY_calibbias * out_voltageY_calibscale Signed-off-by: Nuno Sá --- .../ABI/testing/sysfs-bus-iio-dac-ltc2688 | 86 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 87 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 new file mode 100644 index 000000000000..1c35971277ba --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 @@ -0,0 +1,86 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Dither enable. Write 1 to enable dither or 0 to disable it. This is useful + for changing the dither parameters. They way it should be done is: + + - disable dither operation; + - change dither parameters (eg: frequency, phase...); + - enabled dither operation + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + This raw, unscaled value refers to the dither signal amplitude. + The same scale as in out_voltageY_raw applies. However, the + offset might be different as it's always 0 for this attribute. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Available range for dither raw amplitude values. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Offset applied to out_voltageY_dither_raw. Read only attribute + always set to 0. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Sets the dither signal frequency. Units are in Hz. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Returns the available values for the dither frequency. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Sets the dither signal phase. Units are in Radians. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Returns the available values for the dither phase. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Toggle enable. Write 1 to enable toggle or 0 to disable it. This is + useful when one wants to change the DAC output codes. The way it should + be done is: + + - disable toggle operation; + - change out_voltageY_raw0 and out_voltageY_raw1; + - enable toggle operation. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0 +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1 +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + It has the same meaning as out_voltageY_raw. This attribute is + specific to toggle enabled channels and refers to the DAC output + code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset + as in out_voltageY_raw applies. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Performs a SW toggle. This attribute is specific to toggle + enabled channels and allows to toggle between out_voltageY_raw0 + and out_voltageY_raw1 through software. Writing 0 will select + out_voltageY_raw0 while 1 selects out_voltageY_raw1. diff --git a/MAINTAINERS b/MAINTAINERS index 6fc957727094..fd22f126dc01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11314,6 +11314,7 @@ M: Nuno Sá L: linux-iio@vger.kernel.org S: Supported W: http://ez.analog.com/community/linux-device-drivers +F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 F: drivers/iio/dac/ltc2688.c LTC2947 HARDWARE MONITOR DRIVER From patchwork Fri Feb 25 13:01:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nuno Sa X-Patchwork-Id: 12760206 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2722EC43217 for ; Fri, 25 Feb 2022 13:02:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238247AbiBYNCl (ORCPT ); Fri, 25 Feb 2022 08:02:41 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53594 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237490AbiBYNCk (ORCPT ); Fri, 25 Feb 2022 08:02:40 -0500 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D1C2E1903FD; Fri, 25 Feb 2022 05:02:07 -0800 (PST) Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.1.2/8.16.1.2) with ESMTP id 21P66Cd4002715; Fri, 25 Feb 2022 08:01:50 -0500 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3eesj39j6w-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 25 Feb 2022 08:01:49 -0500 Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 21PD1mnp013418 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 25 Feb 2022 08:01:48 -0500 Received: from ASHBCASHYB5.ad.analog.com (10.64.17.133) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 25 Feb 2022 08:01:47 -0500 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBCASHYB5.ad.analog.com (10.64.17.133) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Fri, 25 Feb 2022 08:01:47 -0500 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Fri, 25 Feb 2022 08:01:47 -0500 Received: from NSA-L01.ad.analog.com ([10.32.224.71]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 21PD1WL4024659; Fri, 25 Feb 2022 08:01:41 -0500 From: =?utf-8?q?Nuno_S=C3=A1?= To: , CC: Rob Herring , Jonathan Cameron , Lars-Peter Clausen , Michael Hennerich Subject: [PATCH v4 3/3] dt-bindings: iio: Add ltc2688 documentation Date: Fri, 25 Feb 2022 14:01:29 +0100 Message-ID: <20220225130129.69-4-nuno.sa@analog.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220225130129.69-1-nuno.sa@analog.com> References: <20220225130129.69-1-nuno.sa@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: pqGhaVoMMejhM1bW81J9d92U9Z7wGQF7 X-Proofpoint-ORIG-GUID: pqGhaVoMMejhM1bW81J9d92U9Z7wGQF7 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.816,Hydra:6.0.425,FMLib:17.11.64.514 definitions=2022-02-25_07,2022-02-25_01,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 clxscore=1015 priorityscore=1501 impostorscore=0 lowpriorityscore=0 malwarescore=0 mlxlogscore=999 suspectscore=0 mlxscore=0 spamscore=0 bulkscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2201110000 definitions=main-2202250074 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Document the LTC2688 devicetree properties. Signed-off-by: Nuno Sá Reviewed-by: Rob Herring --- .../bindings/iio/dac/adi,ltc2688.yaml | 146 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml new file mode 100644 index 000000000000..48f9e7d29423 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2688 DAC + +maintainers: + - Nuno Sá + +description: | + Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf + +properties: + compatible: + enum: + - adi,ltc2688 + + reg: + maxItems: 1 + + vcc-supply: + description: Analog Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + vref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin". + + clr-gpios: + description: + If specified, it will be asserted during driver probe. As the line is + active low, it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@([0-9]|1[0-5])$": + type: object + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 15 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + adi,output-range-microvolt: + description: Specify the channel output full scale range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -15000000 + - const: 15000000 + + adi,overrange: + description: Enable 5% overrange over the selected full scale range. + type: boolean + + clocks: + maxItems: 1 + + adi,toggle-dither-input: + description: + Selects the TGPx pin to be associated with this channel. This setting + only makes sense for toggle or dither enabled channels. If + @adi,toggle-mode is not set and this property is given, the channel is + assumed to be a dither capable channel. Note that multiple channels + can be mapped to the same pin. If this setting is given, the + respective @clock must also be provided. Mappings between this and + input pins + 0 - TGP1 + 1 - TGP2 + 2 - TGP3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + dependencies: + adi,toggle-dither-input: [ clocks ] + + required: + - reg + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + spi { + #address-cells = <1>; + #size-cells = <0>; + ltc2688: ltc2688@0 { + compatible = "adi,ltc2688"; + reg = <0>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + vref-supply = <&vref>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,overrange; + }; + + channel@1 { + reg = <1>; + adi,output-range-microvolt = <0 10000000>; + + clocks = <&clock_tgp3>; + adi,toggle-dither-input = <2>; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index fd22f126dc01..cd81378f5081 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11315,6 +11315,7 @@ L: linux-iio@vger.kernel.org S: Supported W: http://ez.analog.com/community/linux-device-drivers F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 +F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml F: drivers/iio/dac/ltc2688.c LTC2947 HARDWARE MONITOR DRIVER