From patchwork Sun Feb 27 12:33:15 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12761668 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 12A27C4167D for ; Sun, 27 Feb 2022 12:41:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230448AbiB0Mlh (ORCPT ); Sun, 27 Feb 2022 07:41:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50126 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230308AbiB0Mlg (ORCPT ); Sun, 27 Feb 2022 07:41:36 -0500 X-Greylist: delayed 450 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Sun, 27 Feb 2022 04:40:58 PST Received: from new1-smtp.messagingengine.com (new1-smtp.messagingengine.com [66.111.4.221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6D4936CA7F; Sun, 27 Feb 2022 04:40:58 -0800 (PST) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailnew.nyi.internal (Postfix) with ESMTP id 57E78580220; Sun, 27 Feb 2022 07:33:31 -0500 (EST) Received: from mailfrontend1 ([10.202.2.162]) by compute3.internal (MEProxy); Sun, 27 Feb 2022 07:33:31 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:content-type:date:date:from :from:in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm3; bh=zLQkkhbQeIjWnU 1hBY6twf2xAXkJm4JA070qof15/jo=; b=pzEfENPL60TNOwXhVRNRScvpFerKx3 eYgTaTsRQo/L1ECwbD18UgC/D+HojNtX+EfaIuQPOTef7Ue9hnwttpjP8JczHic6 RZTXeb6jtP6JrguJl2yToRfMCi0yX8VLqDb+xEt5Iqt/74TJb52JRmzy89Nl35DJ T7fZFvICFYUjtIgVi+CfP1FsjZbJ0hit/B9j9GcA8SHWkLbAoQBUGbSnDlrZVhRK 6pKstPISpTPTstP75M8YflvMhWgKaJ2OxjxMnCbfEA6Ir7ofDNzPJjts/mAX1mU0 IdFCyuWM15s7Mm9PD2OqaTltObpscO6RTn/AxIaN8MwSR7a+tRDFYBFw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding :content-type:date:date:from:from:in-reply-to:in-reply-to :message-id:mime-version:references:reply-to:sender:subject :subject:to:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender :x-sasl-enc; s=fm2; bh=zLQkkhbQeIjWnU1hBY6twf2xAXkJm4JA070qof15/ jo=; b=efV/FF3q8i1bwSwi6w3m+/aeJ/6lalVQf8/EHUNBelf3nVBKDpSFmRo0R LlnWJuRBS+pHxZqF4ZEdl2KNclvWTPqNO+G3P57FpFL40BsT/wMjLIE4CIlBtLzb LT2GGjHKNTKZUy6IwnFgCtqIuVBvcQGyIVbDBPxp+DyJ/4oyZ/EsjRaMPLt9Qxh3 1bI0ORBBq3HhbMKbQE/xYKuyWyeyHN1DJ8wmZ6TPrP0c6GfdG0dc0MnDDFRCVIMl ZMiKQqZCN2q+IffGlDHNdPiZo8jYkzHwq28Em+FlRn8a428XBwKhpAPRLVjV1frc uhXjoNZvkgJfjuSBD1RVIR3FIQyMw== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrleekgdegtdcutefuodetggdotefrodftvf curfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfghnecu uegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenuc fjughrpefhvffufffkofgjfhggtgfgsehtkeertdertdejnecuhfhrohhmpeetlhhishht rghirhcuhfhrrghntghishcuoegrlhhishhtrghirhesrghlihhsthgrihhrvdefrdhmvg eqnecuggftrfgrthhtvghrnhepjeeftefhfedufeegffekgfeuffegfeetfefgffehgeel gfdvvdehvedtueeujeejnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrg hilhhfrhhomheprghlihhsthgrihhrsegrlhhishhtrghirhdvfedrmhgv X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Sun, 27 Feb 2022 07:33:25 -0500 (EST) From: Alistair Francis To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: robh+dt@kernel.org, linus.walleij@linaro.org, rydberg@bitmath.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, alistair23@gmail.com, Alistair Francis , Maxime Ripard , =?utf-8?q?Myl=C3=A8ne_Josserand?= , Peter Geis Subject: [PATCH v6 1/4] Input: Add driver for Cypress Generation 5 touchscreen Date: Sun, 27 Feb 2022 22:33:15 +1000 Message-Id: <20220227123318.313009-2-alistair@alistair23.me> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220227123318.313009-1-alistair@alistair23.me> References: <20220227123318.313009-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This is the basic driver for the Cypress TrueTouch Gen5 touchscreen controllers. This driver supports only the I2C bus but it uses regmap so SPI support could be added later. The touchscreen can retrieve some defined zone that are handled as buttons (according to the hardware). That is why it handles button and multitouch events. Reviewed-by: Maxime Ripard Signed-off-by: Mylène Josserand Signed-off-by: Alistair Francis Tested-by: Andreas Kemnade # Kobo Clara HD Tested-by: Peter Geis --- drivers/input/touchscreen/Kconfig | 16 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/cyttsp5.c | 902 ++++++++++++++++++++++++++++ 3 files changed, 919 insertions(+) create mode 100644 drivers/input/touchscreen/cyttsp5.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2f6adfb7b938..eb4e1b156683 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -284,6 +284,22 @@ config TOUCHSCREEN_CYTTSP4_SPI To compile this driver as a module, choose M here: the module will be called cyttsp4_spi. +config TOUCHSCREEN_CYTTSP5 + tristate "Cypress TrueTouch Gen5 Touchscreen Driver" + depends on I2C + select REGMAP_I2C + select CRC_ITU_T + help + Driver for Parade TrueTouch Standard Product Generation 5 + touchscreen controllers. I2C bus interface support only. + + Say Y here if you have a Cypress Gen5 touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cyttsp5. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 39a8127cf6a5..0ea5c47f7fd9 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c new file mode 100644 index 000000000000..3ac45108090c --- /dev/null +++ b/drivers/input/touchscreen/cyttsp5.c @@ -0,0 +1,902 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Parade TrueTouch(TM) Standard Product V5 Module. + * + * Copyright (C) 2015 Parade Technologies + * Copyright (C) 2012-2015 Cypress Semiconductor + * Copyright (C) 2018 Bootlin + * + * Authors: Mylène Josserand + * Alistair Francis + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CYTTSP5_NAME "cyttsp5" +#define CY_I2C_DATA_SIZE (2 * 256) +#define HID_VERSION 0x0100 +#define CY_MAX_INPUT 512 +#define CYTTSP5_PREALLOCATED_CMD_BUFFER 32 +#define CY_BITS_PER_BTN 1 +#define CY_NUM_BTN_EVENT_ID GENMASK(CY_BITS_PER_BTN, 0) + +#define MAX_AREA 255 +#define HID_OUTPUT_BL_SOP 0x1 +#define HID_OUTPUT_BL_EOP 0x17 +#define HID_OUTPUT_BL_LAUNCH_APP 0x3B +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE 11 +#define HID_OUTPUT_GET_SYSINFO 0x2 +#define HID_OUTPUT_GET_SYSINFO_SIZE 5 +#define HID_OUTPUT_MAX_CMD_SIZE 12 + +#define HID_DESC_REG 0x1 +#define HID_INPUT_REG 0x3 +#define HID_OUTPUT_REG 0x4 + +#define REPORT_ID_TOUCH 0x1 +#define REPORT_ID_BTN 0x3 +#define REPORT_SIZE_5 5 +#define REPORT_SIZE_8 8 +#define REPORT_SIZE_16 16 + +/* Touch reports offsets */ +/* Header offsets */ +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT 16 +/* Record offsets */ +#define TOUCH_REPORT_DESC_CONTACTID 8 +#define TOUCH_REPORT_DESC_X 16 +#define TOUCH_REPORT_DESC_Y 32 +#define TOUCH_REPORT_DESC_P 48 +#define TOUCH_REPORT_DESC_MAJ 56 +#define TOUCH_REPORT_DESC_MIN 64 + +/* HID */ +#define HID_TOUCH_REPORT_ID 0x1 +#define HID_BTN_REPORT_ID 0x3 +#define HID_APP_RESPONSE_REPORT_ID 0x1F +#define HID_APP_OUTPUT_REPORT_ID 0x2F +#define HID_BL_RESPONSE_REPORT_ID 0x30 +#define HID_BL_OUTPUT_REPORT_ID 0x40 + +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET 2 +#define HID_OUTPUT_RESPONSE_CMD_OFFSET 4 +#define HID_OUTPUT_RESPONSE_CMD_MASK GENMASK(6, 0) + +#define HID_SYSINFO_SENSING_OFFSET 33 +#define HID_SYSINFO_BTN_OFFSET 48 +#define HID_SYSINFO_BTN_MASK GENMASK(7, 0) +#define HID_SYSINFO_MAX_BTN 8 + +#define CY_HID_OUTPUT_TIMEOUT_MS 200 +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS 3000 +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS 4000 + +/* maximum number of concurrent tracks */ +#define TOUCH_REPORT_SIZE 10 +#define TOUCH_INPUT_HEADER_SIZE 7 +#define BTN_REPORT_SIZE 9 +#define BTN_INPUT_HEADER_SIZE 5 + +#define MAX_CY_TCH_T_IDS 32 + +/* All usage pages for Touch Report */ +#define TOUCH_REPORT_USAGE_PG_X 0x00010030 +#define TOUCH_REPORT_USAGE_PG_Y 0x00010031 +#define TOUCH_REPORT_USAGE_PG_P 0x000D0030 +#define TOUCH_REPORT_USAGE_PG_CONTACTID 0x000D0051 +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT 0x000D0054 +#define TOUCH_REPORT_USAGE_PG_MAJ 0xFF010062 +#define TOUCH_REPORT_USAGE_PG_MIN 0xFF010063 +#define TOUCH_COL_USAGE_PG 0x000D0022 + +/* System Information interface definitions */ +struct cyttsp5_sensing_conf_data_dev { + u8 electrodes_x; + u8 electrodes_y; + __le16 len_x; + __le16 len_y; + __le16 res_x; + __le16 res_y; + __le16 max_z; + u8 origin_x; + u8 origin_y; + u8 btn; + u8 scan_mode; + u8 max_num_of_tch_per_refresh_cycle; +} __packed; + +struct cyttsp5_sensing_conf_data { + u16 res_x; + u16 res_y; + u16 max_z; + u16 len_x; + u16 len_y; + u8 origin_x; + u8 origin_y; + u8 max_tch; +}; + +enum cyttsp5_tch_abs { /* for ordering within the extracted touch data array */ + CY_TCH_X, /* X */ + CY_TCH_Y, /* Y */ + CY_TCH_P, /* P (Z) */ + CY_TCH_T, /* TOUCH ID */ + CY_TCH_MAJ, /* TOUCH_MAJOR */ + CY_TCH_MIN, /* TOUCH_MINOR */ + CY_TCH_NUM_ABS +}; + +struct cyttsp5_tch_abs_params { + size_t ofs; /* abs byte offset */ + size_t size; /* size in bits */ + size_t min; /* min value */ + size_t max; /* max value */ + size_t bofs; /* bit offset */ +}; + +struct cyttsp5_touch { + int abs[CY_TCH_NUM_ABS]; +}; + +struct cyttsp5_sysinfo { + struct cyttsp5_sensing_conf_data sensing_conf_data; + int num_btns; + struct cyttsp5_tch_abs_params tch_hdr; + struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS]; + u32 key_code[HID_SYSINFO_MAX_BTN]; +}; + +struct cyttsp5_hid_desc { + __le16 hid_desc_len; + u8 packet_id; + u8 reserved_byte; + __le16 bcd_version; + __le16 report_desc_len; + __le16 report_desc_register; + __le16 input_register; + __le16 max_input_len; + __le16 output_register; + __le16 max_output_len; + __le16 command_register; + __le16 data_register; + __le16 vendor_id; + __le16 product_id; + __le16 version_id; + u8 reserved[4]; +} __packed; + +struct cyttsp5 { + struct device *dev; + struct completion cmd_done; + struct cyttsp5_sysinfo sysinfo; + struct cyttsp5_hid_desc hid_desc; + u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER]; + u8 input_buf[CY_MAX_INPUT]; + u8 response_buf[CY_MAX_INPUT]; + struct gpio_desc *reset_gpio; + struct input_dev *input; + char phys[NAME_MAX]; + int num_prv_rec; + struct regmap *regmap; + struct touchscreen_properties prop; + struct regulator *vdd; +}; + +/* + * For what is understood in the datasheet, the register does not + * matter. For consistency, use the Input Register address + * but it does mean anything to the device. The important data + * to send is the I2C address + */ +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max) +{ + int error; + u32 size; + u8 temp[2]; + + /* Read the frame to retrieve the size */ + error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, sizeof(temp)); + if (error) + return error; + + size = get_unaligned_le16(temp); + if (!size || size == 2) + return 0; + + if (size > max) + return -EINVAL; + + /* Get the real value */ + return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size); +} + +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data, + size_t size) +{ + u8 cmd[HID_OUTPUT_MAX_CMD_SIZE]; + + if (size + 1 > HID_OUTPUT_MAX_CMD_SIZE) + return -E2BIG; + + /* High bytes of register address needed as first byte of cmd */ + cmd[0] = (reg >> 8) & 0xFF ; + + /* Copy the rest of the data */ + if (data) + memcpy(&cmd[1], data, size); + + /* + * The hardware wants to receive a frame with the address register + * contained in the first two bytes. As the regmap_write function + * add the register adresse in the frame, we use the low byte as + * first frame byte for the address register and the first + * data byte is the high register + left of the cmd to send + */ + return regmap_bulk_write(ts->regmap, reg & 0xFF, cmd, size + 1); +} + +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data, + int bofs) +{ + int nbyte; + + for (nbyte = 0, *axis = 0; nbyte < size; nbyte++) + *axis += ((xy_data[nbyte] >> bofs) << (nbyte * 8)); + + *axis &= max - 1; +} + +static void cyttsp5_get_touch_record(struct cyttsp5 *ts, + struct cyttsp5_touch *touch, u8 *xy_data) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + enum cyttsp5_tch_abs abs; + + for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) + cyttsp5_get_touch_axis(&touch->abs[abs], + si->tch_abs[abs].size, + si->tch_abs[abs].max, + xy_data + si->tch_abs[abs].ofs, + si->tch_abs[abs].bofs); +} + +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts, + struct cyttsp5_touch *tch, int num_cur_tch) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int i, t = 0, offset = 0; + DECLARE_BITMAP(ids, MAX_CY_TCH_T_IDS); + u8 *tch_addr; + int tmp; + + bitmap_zero(ids, MAX_CY_TCH_T_IDS); + memset(tch->abs, 0, sizeof(tch->abs)); + + switch (ts->input_buf[2]) { + case HID_TOUCH_REPORT_ID: + offset = TOUCH_INPUT_HEADER_SIZE; + break; + case HID_BTN_REPORT_ID: + offset = BTN_INPUT_HEADER_SIZE; + break; + } + + for (i = 0; i < num_cur_tch; i++) { + tch_addr = ts->input_buf + offset + (i * TOUCH_REPORT_SIZE); + cyttsp5_get_touch_record(ts, tch, tch_addr); + + /* Convert MAJOR/MINOR from mm to resolution */ + tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x; + tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x; + tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x; + tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x; + + t = tch->abs[CY_TCH_T]; + input_mt_slot(ts->input, t); + input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); + __set_bit(t, ids); + + /* position and pressure fields */ + touchscreen_report_pos(ts->input, &ts->prop, + tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y], + true); + input_report_abs(ts->input, ABS_MT_PRESSURE, + tch->abs[CY_TCH_P]); + + /* Get the extended touch fields */ + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + tch->abs[CY_TCH_MAJ]); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + tch->abs[CY_TCH_MIN]); + } + + ts->num_prv_rec = num_cur_tch; +} + +static int cyttsp5_mt_attention(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int max_tch = si->sensing_conf_data.max_tch; + struct cyttsp5_touch tch; + u8 num_cur_tch; + + cyttsp5_get_touch_axis((int *) &num_cur_tch, si->tch_hdr.size, + si->tch_hdr.max, + ts->input_buf + 3 + si->tch_hdr.ofs, + si->tch_hdr.bofs); + + if (num_cur_tch > max_tch) { + dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch); + num_cur_tch = max_tch; + } + + if (num_cur_tch == 0 && ts->num_prv_rec == 0) + return 0; + + /* extract xy_data for all currently reported touches */ + if (num_cur_tch) + cyttsp5_get_mt_touches(ts, &tch, num_cur_tch); + + input_mt_sync_frame(ts->input); + input_sync(ts->input); + + return 0; +} + +static int cyttsp5_setup_input_device(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int max_x, max_y, max_p; + int max_x_tmp, max_y_tmp; + int error; + + max_x_tmp = si->sensing_conf_data.res_x; + max_y_tmp = si->sensing_conf_data.res_y; + max_x = max_x_tmp - 1; + max_y = max_y_tmp - 1; + max_p = si->sensing_conf_data.max_z; + + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0); + + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); + input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0); + + error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, + INPUT_MT_DROP_UNUSED | INPUT_MT_DIRECT); + if (error < 0) + return error; + + error = input_register_device(ts->input); + if (error < 0) + dev_err(dev, "Error, failed register input device r=%d\n", error); + + return error; +} + +static int cyttsp5_parse_dt_key_code(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + + if (!si->num_btns) + return 0; + + /* Initialize the button to RESERVED */ + memset32(si->key_code, KEY_RESERVED, si->num_btns); + + return device_property_read_u32_array(dev, "linux,keycodes", + si->key_code, si->num_btns); +} + +static int cyttsp5_btn_attention(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int cur_btn, offset = 0; + int cur_btn_state; + + switch (ts->input_buf[2]) { + case HID_TOUCH_REPORT_ID: + offset = TOUCH_INPUT_HEADER_SIZE; + break; + case HID_BTN_REPORT_ID: + offset = BTN_INPUT_HEADER_SIZE; + break; + } + + if (ts->input_buf[2] != HID_BTN_REPORT_ID || !si->num_btns) + return 0; + + /* extract button press/release touch information */ + for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) { + /* Get current button state */ + cur_btn_state = (ts->input_buf[offset] >> (cur_btn * CY_BITS_PER_BTN)) + & CY_NUM_BTN_EVENT_ID; + + input_report_key(ts->input, si->key_code[cur_btn], + cur_btn_state); + input_sync(ts->input); + } + + return 0; +} + +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code) +{ + u16 size, crc; + u8 status, report_id; + int command_code; + + size = get_unaligned_le16(&ts->response_buf[0]); + + if (!size) + return 0; + + report_id = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET]; + + switch (report_id) { + case HID_BL_RESPONSE_REPORT_ID: { + if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) { + dev_err(ts->dev, "HID output response, wrong SOP\n"); + return -EPROTO; + } + + if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) { + dev_err(ts->dev, "HID output response, wrong EOP\n"); + return -EPROTO; + } + + crc = crc_itu_t(0xFFFF, &ts->response_buf[4], size - 7); + if (get_unaligned_le16(&ts->response_buf[size - 3]) != crc) { + dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n", + crc); + return -EPROTO; + } + + status = ts->response_buf[5]; + if (status) { + dev_err(ts->dev, "HID output response, ERROR:%d\n", + status); + return -EPROTO; + } + break; + } + case HID_APP_RESPONSE_REPORT_ID: { + command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET] + & HID_OUTPUT_RESPONSE_CMD_MASK; + if (command_code != code) { + dev_err(ts->dev, + "HID output response, wrong command_code:%X\n", + command_code); + return -EPROTO; + } + break; + } + } + + return 0; +} + +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET] + & HID_SYSINFO_BTN_MASK; + + si->num_btns = hweight8(btns); +} + +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts) +{ + struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data; + struct cyttsp5_sensing_conf_data_dev *scd_dev = + (struct cyttsp5_sensing_conf_data_dev *) + &ts->response_buf[HID_SYSINFO_SENSING_OFFSET]; + + cyttsp5_si_get_btn_data(ts); + + scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle; + scd->res_x = get_unaligned_le16(&scd_dev->res_x); + scd->res_y = get_unaligned_le16(&scd_dev->res_y); + scd->max_z = get_unaligned_le16(&scd_dev->max_z); + scd->len_x = get_unaligned_le16(&scd_dev->len_x); + scd->len_y = get_unaligned_le16(&scd_dev->len_y); + + return 0; +} + +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts) +{ + int rc; + u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE]; + + /* HI bytes of Output register address */ + put_unaligned_le16(HID_OUTPUT_GET_SYSINFO_SIZE, cmd); + cmd[2] = HID_APP_OUTPUT_REPORT_ID; + cmd[3] = 0x0; /* Reserved */ + cmd[4] = HID_OUTPUT_GET_SYSINFO; + + rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, + HID_OUTPUT_GET_SYSINFO_SIZE); + if (rc) { + dev_err(ts->dev, "Failed to write command %d", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID output cmd execution timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO); + if (rc) { + dev_err(ts->dev, "Validation of the response failed\n"); + return rc; + } + + return cyttsp5_get_sysinfo_regs(ts); +} + +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts) +{ + int rc; + u8 cmd[HID_OUTPUT_BL_LAUNCH_APP]; + u16 crc; + + put_unaligned_le16(HID_OUTPUT_BL_LAUNCH_APP_SIZE, cmd); + cmd[2] = HID_BL_OUTPUT_REPORT_ID; + cmd[3] = 0x0; /* Reserved */ + cmd[4] = HID_OUTPUT_BL_SOP; + cmd[5] = HID_OUTPUT_BL_LAUNCH_APP; + put_unaligned_le16(0x00, &cmd[6]); + crc = crc_itu_t(0xFFFF, &cmd[4], 4); + put_unaligned_le16(crc, &cmd[8]); + cmd[10] = HID_OUTPUT_BL_EOP; + + rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, + HID_OUTPUT_BL_LAUNCH_APP_SIZE); + if (rc) { + dev_err(ts->dev, "Failed to write command %d", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID output cmd execution timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP); + if (rc) { + dev_err(ts->dev, "Validation of the response failed\n"); + return rc; + } + + return 0; +} + +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts, + struct cyttsp5_hid_desc *desc) +{ + struct device *dev = ts->dev; + __le16 hid_desc_register = HID_DESC_REG; + int rc; + u8 cmd[2]; + + /* Set HID descriptor register */ + memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register)); + + rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0); + if (rc) { + dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID get descriptor timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + memcpy(desc, ts->response_buf, sizeof(*desc)); + + /* Check HID descriptor length and version */ + if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) || + le16_to_cpu(desc->bcd_version) != HID_VERSION) { + dev_err(dev, "Unsupported HID version\n"); + return -ENODEV; + } + + return 0; +} + +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size, + int offset) +{ + tch_abs->ofs = offset / 8; + tch_abs->size = report_size / 8; + if (report_size % 8) + tch_abs->size += 1; + tch_abs->min = 0; + tch_abs->max = 1 << report_size; + tch_abs->bofs = offset - (tch_abs->ofs << 3); + + return 0; +} + +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle) +{ + struct cyttsp5 *ts = handle; + int report_id; + int size; + int error; + + error = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT); + if (error) + return IRQ_HANDLED; + + size = get_unaligned_le16(&ts->input_buf[0]); + if (size == 0) { + /* reset */ + report_id = 0; + size = 2; + } else { + report_id = ts->input_buf[2]; + } + + switch (report_id) { + case HID_TOUCH_REPORT_ID: + cyttsp5_mt_attention(ts->dev); + break; + case HID_BTN_REPORT_ID: + cyttsp5_btn_attention(ts->dev); + break; + default: + /* It is not an input but a command response */ + memcpy(ts->response_buf, ts->input_buf, size); + complete(&ts->cmd_done); + } + + return IRQ_HANDLED; +} + +static int cyttsp5_deassert_int(struct cyttsp5 *ts) +{ + u16 size; + u8 buf[2]; + int error; + + error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, sizeof(buf)); + if (error < 0) + return error; + + size = get_unaligned_le16(&buf[0]); + if (size == 2 || size == 0) + return 0; + + return -EINVAL; +} + +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + + fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16, + TOUCH_REPORT_DESC_X); + fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16, + TOUCH_REPORT_DESC_Y); + fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8, + TOUCH_REPORT_DESC_P); + fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5, + TOUCH_REPORT_DESC_CONTACTID); + fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5, + TOUCH_REPORT_DESC_HDR_CONTACTCOUNT); + fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8, + TOUCH_REPORT_DESC_MAJ); + fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8, + TOUCH_REPORT_DESC_MIN); + + return 0; +} + +static int cyttsp5_startup(struct cyttsp5 *ts) +{ + int error; + + error = cyttsp5_deassert_int(ts); + if (error) { + dev_err(ts->dev, "Error on deassert int r=%d\n", error); + return -ENODEV; + } + + /* + * Launch the application as the device starts in bootloader mode + * because of a power-on-reset + */ + error = cyttsp5_hid_output_bl_launch_app(ts); + if (error < 0) { + dev_err(ts->dev, "Error on launch app r=%d\n", error); + return error; + } + + error = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc); + if (error < 0) { + dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", error); + return error; + } + + error = cyttsp5_fill_all_touch(ts); + if (error < 0) { + dev_err(ts->dev, "Error on report descriptor r=%d\n", error); + return error; + } + + error = cyttsp5_hid_output_get_sysinfo(ts); + if (error) { + dev_err(ts->dev, "Error on getting sysinfo r=%d\n", error); + return error; + } + + return error; +} + +static void cyttsp5_cleanup(void *data) +{ + struct cyttsp5 *ts = data; + + regulator_disable(ts->vdd); +} + +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name) +{ + struct cyttsp5 *ts; + struct cyttsp5_sysinfo *si; + int error, i; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + /* Initialize device info */ + ts->regmap = regmap; + ts->dev = dev; + si = &ts->sysinfo; + dev_set_drvdata(dev, ts); + + init_completion(&ts->cmd_done); + + /* Power up the device */ + ts->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(ts->vdd)) { + error = PTR_ERR(ts->vdd); + return error; + } + + error = devm_add_action_or_reset(dev, cyttsp5_cleanup, ts); + if (error) { + return error; + } + + error = regulator_enable(ts->vdd); + if (error) { + return error; + } + + ts->input = devm_input_allocate_device(dev); + if (!ts->input) { + dev_err(dev, "Error, failed to allocate input device\n"); + return -ENODEV; + } + + ts->input->name = "cyttsp5"; + scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + ts->input->phys = ts->phys; + input_set_drvdata(ts->input, ts); + + /* Reset the gpio to be in a reset state */ + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(dev, "Failed to request reset gpio, error %d\n", error); + return error; + } + gpiod_set_value(ts->reset_gpio, 0); + + /* Need a delay to have device up */ + msleep(20); + + error = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq, + IRQF_ONESHOT, name, ts); + if (error) { + dev_err(dev, "unable to request IRQ\n"); + return error; + } + + error = cyttsp5_startup(ts); + if (error) { + dev_err(ts->dev, "Fail initial startup r=%d\n", error); + return error; + } + + error = cyttsp5_parse_dt_key_code(dev); + if (error < 0) { + dev_err(ts->dev, "Error while parsing dts %d\n", error); + return error; + } + + touchscreen_parse_properties(ts->input, true, &ts->prop); + + __set_bit(EV_KEY, ts->input->evbit); + for (i = 0; i < si->num_btns; i++) + __set_bit(si->key_code[i], ts->input->keybit); + + return cyttsp5_setup_input_device(dev); +} + +static int cyttsp5_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + }; + + regmap = devm_regmap_init_i2c(client, &config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap allocation failed: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return cyttsp5_probe(&client->dev, regmap, client->irq, client->name); +} + +static const struct of_device_id cyttsp5_of_match[] = { + { .compatible = "cypress,tt21000", }, + { } +}; +MODULE_DEVICE_TABLE(of, cyttsp5_of_match); + +static const struct i2c_device_id cyttsp5_i2c_id[] = { + { CYTTSP5_NAME, 0, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id); + +static struct i2c_driver cyttsp5_i2c_driver = { + .driver = { + .name = CYTTSP5_NAME, + .of_match_table = cyttsp5_of_match, + }, + .probe = cyttsp5_i2c_probe, + .id_table = cyttsp5_i2c_id, +}; +module_i2c_driver(cyttsp5_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product"); +MODULE_AUTHOR("Mylène Josserand "); From patchwork Sun Feb 27 12:33:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12761665 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 256D2C4332F for ; Sun, 27 Feb 2022 12:41:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230431AbiB0Mlh (ORCPT ); Sun, 27 Feb 2022 07:41:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50124 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230251AbiB0Mlg (ORCPT ); Sun, 27 Feb 2022 07:41:36 -0500 Received: from new1-smtp.messagingengine.com (new1-smtp.messagingengine.com [66.111.4.221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 898636D382; Sun, 27 Feb 2022 04:40:58 -0800 (PST) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailnew.nyi.internal (Postfix) with ESMTP id 7E9DE580223; Sun, 27 Feb 2022 07:33:35 -0500 (EST) Received: from mailfrontend1 ([10.202.2.162]) by compute3.internal (MEProxy); Sun, 27 Feb 2022 07:33:35 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm3; bh=TdjkeNItJHdTmy q+LFHIzBr44CzyamChCcNOe2cjE2M=; b=yLitF93uqMywQosHgFTae2D+lE+uDf xMPcSSM/ovXzZmD6W++IDHsdY57B6bsOCdhDtCwyBFsrb/Z2wYaGFht6F5XPmzIq LqNm8Fmmk9lqLQBF4e1yrpRVy0IT0BhGVWXTZUvAVJKUXTmcPMr3Fyix0oW9660x GZYy8JqepMq155hHILAZhlY6Nz804h2BBro4lnSsbCSlCF/caKqrAvgPnHaYkiSt JsgkKMrHMvkxMynlR6eIpNZVF6SIRZSrfuEqiq0RZpGQxtX0DYbPR+8ZlsKPGKJD ce/EyTn1g8ZFMjKAuZ50FQqPze3+5/zynCIFk7vh6weOwUkd1ZlCCgiw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm2; bh=TdjkeN ItJHdTmyq+LFHIzBr44CzyamChCcNOe2cjE2M=; b=UABfOWN1VOKhmIXQSG9am0 T4Txvw90JxoG0Dmw++jNyFFgM13o2tBhppOsYXgb66Mp83LnHqfG5Da8l4OJ8tmj C2U/YS5ULKFWDw5fJHyJF79W4eioSTdD3t3SGvH9JYbeaIw/yAmPqLtYYmu3/140 IJgd6Yz14Z4Y2bDLYDmVi5DXLBnzkbOOjjt0NMRJajaMlaROS48fQGCSPwE58KCE 8CaDCqbkgxR48768zcs62mPpFYjxEjzVXM0wZ7afqAm+oKbSowJIPrNK+f6GmMhl qs9+DQx/NzpASvt1QJg1C6DTjo5IwYiTzg7WtIhl67bW9dYIunoxUwwmik4DAsdg == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrleekgdegtdcutefuodetggdotefrodftvf curfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfghnecu uegrihhlohhuthemuceftddtnecunecujfgurhephffvufffkffojghfggfgsedtkeertd ertddtnecuhfhrohhmpeetlhhishhtrghirhcuhfhrrghntghishcuoegrlhhishhtrghi rhesrghlihhsthgrihhrvdefrdhmvgeqnecuggftrfgrthhtvghrnhepffdthffggefgle fgkeejhfekiefgleelfefhtefhheefteelgeeggefgfeffvddtnecuffhomhgrihhnpegu vghvihgtvghtrhgvvgdrohhrghenucevlhhushhtvghrufhiiigvpedtnecurfgrrhgrmh epmhgrihhlfhhrohhmpegrlhhishhtrghirhesrghlihhsthgrihhrvdefrdhmvg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Sun, 27 Feb 2022 07:33:31 -0500 (EST) From: Alistair Francis To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: robh+dt@kernel.org, linus.walleij@linaro.org, rydberg@bitmath.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, alistair23@gmail.com, Alistair Francis Subject: [PATCH v6 2/4] dt-bindings: input: Add Cypress TT2100 touchscreen controller Date: Sun, 27 Feb 2022 22:33:16 +1000 Message-Id: <20220227123318.313009-3-alistair@alistair23.me> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220227123318.313009-1-alistair@alistair23.me> References: <20220227123318.313009-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings documentation. It can use I2C or SPI bus. This touchscreen can handle some defined zone that are designed and sent as button. To be able to customize the keycode sent, the "linux,code" property in a "button" sub-node can be used. Signed-off-by: Alistair Francis Reviewed-by: Linus Walleij --- .../input/touchscreen/cypress,tt21000.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml new file mode 100644 index 000000000000..12a9c13f7706 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress TT2100 touchscreen controller + +description: The Cypress TT2100 series (also known as "CYTTSP5" after + the marketing name Cypress TrueTouch Standard Product series 5). + +maintainers: + - Alistair Francis + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,tt21000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator for voltage. + + reset-gpios: + maxItems: 1 + + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + +patternProperties: + "^button@[0-9]+$": + type: object + properties: + reg: + maxItems: 1 + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Keycode to emit + + required: + - reg + - linux,keycodes + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_reset_ds203>; + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + + button@0 { + reg = <0>; + linux,keycodes = ; + }; + + button@1 { + reg = <1>; + linux,keycodes = ; + }; + + button@2 { + reg = <2>; + linux,keycodes = ; + }; + }; + }; +... From patchwork Sun Feb 27 12:33:17 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12761664 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EC7BCC433FE for ; Sun, 27 Feb 2022 12:41:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229966AbiB0Mlf (ORCPT ); Sun, 27 Feb 2022 07:41:35 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50106 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229446AbiB0Mlf (ORCPT ); Sun, 27 Feb 2022 07:41:35 -0500 Received: from new1-smtp.messagingengine.com (new1-smtp.messagingengine.com [66.111.4.221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 747206D1BB; Sun, 27 Feb 2022 04:40:58 -0800 (PST) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailnew.nyi.internal (Postfix) with ESMTP id CD30D580225; Sun, 27 Feb 2022 07:33:39 -0500 (EST) Received: from mailfrontend1 ([10.202.2.162]) by compute3.internal (MEProxy); Sun, 27 Feb 2022 07:33:39 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm3; bh=oa3rt+5mRji0qS Zmd+ZP6PfKE+At2xRfDzTBnRo+c+Q=; b=PYt/bWUWDHeAEQ4JHkBJICv5+7Q3rT T1gv6zhDeKz8TMWy3flqrErB+Ea8s9WLDKVQ+i4YOO2nDr/TXLsLJoyLk8bkghAF T8exCgDYha5N8Z7CU4oQnI5sbkKpaZmb4gmjJfKmeEDLcPIQCzJi28LSEbuL77IH YQYA8L6RcQKvRJIaOmBf12cJXEHZ8lA7CDT5O8DaXMHczKB2eL4+p/FjSlW9RC8+ O5+0b9rV69QVSPKrPlb1cjlTWT2ctcPGkf51pfLrXqiIdvmCPD1m9rhAaiex0it3 pdnCfS1PubxC3jcSeZ75phIdg0ozfHUZiG4htKmipTR3vJSHmu9s3SRg== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm2; bh=oa3rt+ 5mRji0qSZmd+ZP6PfKE+At2xRfDzTBnRo+c+Q=; b=Vp+rQpiz3rmIT/vyov766P 5RhL1jLK/JuaXS6MtE1u3opIo+vtVG1uCcdlj0riJ00Y09+6N4yScjuYRQMA8X+R bcBm9pwQZCsiDF+rufgQOSWN16OMdWWUVUgrZhHVrd1/EhyGXx18sIra0zWbBpiU WAopL7mG5mUPBdFEHK+eCJbnS1X/KX6UUn5BUyiEy/+D4/3DwkN11vIjPa0+EGWl /sqPbMtRayfiyyPMuR5HEhqmcqtlN/oveIcNXBeULRpVAhyj6XLiO4rtH2NDbsJW RMh2J8j9IaXjY7f2yfxzEn7T+bP7YeQgfXa0GH7HYrIqKvP8O1Y8fkh0DcFGueUg == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrleekgdegtdcutefuodetggdotefrodftvf curfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfghnecu uegrihhlohhuthemuceftddtnecunecujfgurhephffvufffkffojghfggfgsedtkeertd ertddtnecuhfhrohhmpeetlhhishhtrghirhcuhfhrrghntghishcuoegrlhhishhtrghi rhesrghlihhsthgrihhrvdefrdhmvgeqnecuggftrfgrthhtvghrnhepgeegtdetjeekge eguefgheeuvedugedvteejveeiudegvddtkeffkeehtdetudfhnecuvehluhhsthgvrhfu ihiivgeptdenucfrrghrrghmpehmrghilhhfrhhomheprghlihhsthgrihhrsegrlhhish htrghirhdvfedrmhgv X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Sun, 27 Feb 2022 07:33:35 -0500 (EST) From: Alistair Francis To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: robh+dt@kernel.org, linus.walleij@linaro.org, rydberg@bitmath.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, alistair23@gmail.com, Alistair Francis Subject: [PATCH v6 3/4] ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen Date: Sun, 27 Feb 2022 22:33:17 +1000 Message-Id: <20220227123318.313009-4-alistair@alistair23.me> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220227123318.313009-1-alistair@alistair23.me> References: <20220227123318.313009-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Signed-off-by: Alistair Francis --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f7498df08dfe..f5d263e79aa5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_AD7879=y CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_CYTTSP5=y CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y From patchwork Sun Feb 27 12:33:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12761667 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7D16AC433F5 for ; Sun, 27 Feb 2022 12:41:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230462AbiB0Mli (ORCPT ); Sun, 27 Feb 2022 07:41:38 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50120 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230186AbiB0Mlg (ORCPT ); Sun, 27 Feb 2022 07:41:36 -0500 Received: from new1-smtp.messagingengine.com (new1-smtp.messagingengine.com [66.111.4.221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7B6026D1BE; Sun, 27 Feb 2022 04:40:58 -0800 (PST) Received: from compute2.internal (compute2.nyi.internal [10.202.2.46]) by mailnew.nyi.internal (Postfix) with ESMTP id EDEBC580227; Sun, 27 Feb 2022 07:33:43 -0500 (EST) Received: from mailfrontend1 ([10.202.2.162]) by compute2.internal (MEProxy); Sun, 27 Feb 2022 07:33:43 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm3; bh=Og9BxYB3S6s2eW 9bem199hyPU+nZaWl1s2wrCXUxwp0=; b=G5mMzYi3Zqa8sX3Ad06ij1OH/1TQtn cDs2P7z1JwC52M3yQ/xa7tpMJPCRb0/M9iwtQ9cb7n2Y3Jcztezs9G/2YU6XZtfs kH8lCD0a1dAxCPkf/VB0xaSz3eaw0Gvtjb+Hga9ytTWZRGhifcmkD8unA14XrvrT 1NppcPu5+0oGmm2CWfmY3fry/0yy+pkpmfuh6isTayPr5kTQ5bUbPjFCuFI2qaCw JLjouH+sCPYbfm7xovMuM79Wn+0K2i7JdcoyDau9BPOK98GGkwt2dVSy2Ewqico1 IJTIgcj23IxyMwoFTKaXWwKkUAO/4klVg6Q+YqMbT/M2gvSiDNVZwCfw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm2; bh=Og9BxY B3S6s2eW9bem199hyPU+nZaWl1s2wrCXUxwp0=; b=BDHT3zB9Hn9ioXF9I2l83G kZIYTD96pcYeBuER7wiQBB3hMIhCoKKUFWuWbziviSFvDhlpd0sj6NhFW+Hm61tj q3rBl3+8QXLRUapj85KNTWbE4K0qNQuUlglfKRrJQfdCO6p48qXftnyBHai+YH/i FzY8jhwf8ty6mM76MLfGhOSoyd31xwIFOTQq9zVBx7gwd8I77tqzOSC/+enAJYGQ a2XvEjI6i43KfFEQFXUi/KYO8bamescmcYsHa2PQo52P3XCt1owAEKpnPsCh86CZ zMSCB4iqrgw6iZ5H5tmAXtFlbwJm1c9hz0i0N2Mzgl143SMItg3jeGxwVDRwt2/A == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrleekgdegtdcutefuodetggdotefrodftvf curfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfghnecu uegrihhlohhuthemuceftddtnecunecujfgurhephffvufffkffojghfggfgsedtkeertd ertddtnecuhfhrohhmpeetlhhishhtrghirhcuhfhrrghntghishcuoegrlhhishhtrghi rhesrghlihhsthgrihhrvdefrdhmvgeqnecuggftrfgrthhtvghrnhepgeegtdetjeekge eguefgheeuvedugedvteejveeiudegvddtkeffkeehtdetudfhnecuvehluhhsthgvrhfu ihiivgeptdenucfrrghrrghmpehmrghilhhfrhhomheprghlihhsthgrihhrsegrlhhish htrghirhdvfedrmhgv X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Sun, 27 Feb 2022 07:33:40 -0500 (EST) From: Alistair Francis To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: robh+dt@kernel.org, linus.walleij@linaro.org, rydberg@bitmath.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, alistair23@gmail.com, Alistair Francis Subject: [PATCH v6 4/4] ARM: dts: imx7d-remarkable2: Enable the cyttsp5 Date: Sun, 27 Feb 2022 22:33:18 +1000 Message-Id: <20220227123318.313009-5-alistair@alistair23.me> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220227123318.313009-1-alistair@alistair23.me> References: <20220227123318.313009-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Add support for the cyttsp5 touchscreen controller for the reMarkable 2. Signed-off-by: Alistair Francis --- arch/arm/boot/dts/imx7d-remarkable2.dts | 97 +++++++++++++++++++++++++ 1 file changed, 97 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index a2a91bfdd98e..ca18ccc03197 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include / { model = "reMarkable 2.0"; @@ -47,6 +48,18 @@ reg_digitizer: regulator-digitizer { startup-delay-us = <100000>; /* 100 ms */ }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_touch_reg>; + pinctrl-1 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -84,6 +97,67 @@ wacom_digitizer: digitizer@9 { }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + tsc@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + + button@0 { + reg = <0>; + linux,keycodes = ; + }; + + button@1 { + reg = <1>; + linux,keycodes = ; + }; + + button@2 { + reg = <2>; + linux,keycodes = ; + }; + + button@3 { + reg = <3>; + linux,keycodes = ; + }; + + button@4 { + reg = <4>; + linux,keycodes = ; + }; + + button@5 { + reg = <5>; + linux,keycodes = ; + }; + + button@6 { + reg = <6>; + linux,keycodes = ; + }; + + button@7 { + reg = <7>; + linux,keycodes = ; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -177,6 +251,15 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -184,6 +267,20 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79