From patchwork Wed Mar 23 12:00:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12789734 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4332FC433F5 for ; Wed, 23 Mar 2022 12:00:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244034AbiCWMCI (ORCPT ); Wed, 23 Mar 2022 08:02:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50382 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235981AbiCWMCH (ORCPT ); Wed, 23 Mar 2022 08:02:07 -0400 Received: from wout2-smtp.messagingengine.com (wout2-smtp.messagingengine.com [64.147.123.25]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 378A17A99A; Wed, 23 Mar 2022 05:00:37 -0700 (PDT) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailout.west.internal (Postfix) with ESMTP id D65A33200C14; Wed, 23 Mar 2022 08:00:35 -0400 (EDT) Received: from mailfrontend2 ([10.202.2.163]) by compute3.internal (MEProxy); Wed, 23 Mar 2022 08:00:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:content-type:date:date:from :from:in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm1; bh=QGAjmaqLEZsGrI vZP2lNR8tobeGnBbdvQYdAeMIPNyA=; b=UlQ1GEZDc3WwgRCFzVOmA++oRG82zc lDXD+OsXzU4rqoln9K6XemTVGeb3E3JvIu0e528mUlbO0vPBzNDP7N+ybeyypeAy OyeLAcHL9pG7RLg9yURsfp2M5yyxjaDQGvGc2G0jHEUeqxtS688jmGxgyVYJIKYn +IdKddGXG3WrhnDmR7CVoNtlAP6h7CfoB9mLh8U2eF6FqhUPann+9DUyPl+iBgTC PSpp9p3tnr31eQtZ57W1ReFKTZBZi5oGg7ZsxuDQ88Abkl7GB2ac4Xam1c9C+UBt Iak8L/xewscnmAOW5kTU+er0VdWf1WTJVBtFopyvB97eHkAfWuUwbwpg== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding :content-type:date:date:from:from:in-reply-to:in-reply-to :message-id:mime-version:references:reply-to:sender:subject :subject:to:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender :x-sasl-enc; s=fm3; bh=QGAjmaqLEZsGrIvZP2lNR8tobeGnBbdvQYdAeMIPN yA=; b=hYtP2ytrRE0g8g4Jn2B633wYQDgNTZOeYDhjVXbGEQPYZEShWNouJMx7e Lp1i0l834+A/9Mu8NcN0LbwNigpE3S8ebQkcWEm9lzggvZ71/F1s2KDC618I/QEm 1rg4slCbjhakn4DjsDG3ZJsfWJbm97CRURp8W+G3UPUf+94iWoIuQ/9qpmT0CgqY OvxMlidHR1mhJhpu/0nZtuPGcf8sKpjJyOx7O5IwiVux6C+TaNI/XU0hw3DZUB7O XqIxRE7UOiRs6rTiXfwm9vWD60uPLNeX34Fodf87zZqfeLwyJ0BMyEUKojzbXIcs z6dpxZWmo/TZS23eIzzpX/DFVkjng== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrudegjedgfeefucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvufffkffojghfgggtgfesthekredtredtjeenucfhrhhomheptehlihhs thgrihhrucfhrhgrnhgtihhsuceorghlihhsthgrihhrsegrlhhishhtrghirhdvfedrmh gvqeenucggtffrrghtthgvrhhnpeejfeethfefudefgeffkefgueffgeefteefgfffheeg lefgvddvheevtdeuueejjeenucevlhhushhtvghrufhiiigvpedtnecurfgrrhgrmhepmh grihhlfhhrohhmpegrlhhishhtrghirhesrghlihhsthgrihhrvdefrdhmvg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 23 Mar 2022 08:00:30 -0400 (EDT) From: Alistair Francis To: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: alistair23@gmail.com, rydberg@bitmath.org, linus.walleij@linaro.org, robh+dt@kernel.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, Alistair Francis , Maxime Ripard , =?utf-8?q?Myl=C3=A8ne_Josserand?= , Peter Geis Subject: [PATCH v7 1/4] Input: Add driver for Cypress Generation 5 touchscreen Date: Wed, 23 Mar 2022 22:00:18 +1000 Message-Id: <20220323120021.361137-2-alistair@alistair23.me> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220323120021.361137-1-alistair@alistair23.me> References: <20220323120021.361137-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This is the basic driver for the Cypress TrueTouch Gen5 touchscreen controllers. This driver supports only the I2C bus but it uses regmap so SPI support could be added later. The touchscreen can retrieve some defined zone that are handled as buttons (according to the hardware). That is why it handles button and multitouch events. Reviewed-by: Maxime Ripard Signed-off-by: Mylène Josserand Signed-off-by: Alistair Francis Tested-by: Andreas Kemnade # Kobo Clara HD Tested-by: Peter Geis --- drivers/input/touchscreen/Kconfig | 16 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/cyttsp5.c | 902 ++++++++++++++++++++++++++++ 3 files changed, 919 insertions(+) create mode 100644 drivers/input/touchscreen/cyttsp5.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2f6adfb7b938..eb4e1b156683 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -284,6 +284,22 @@ config TOUCHSCREEN_CYTTSP4_SPI To compile this driver as a module, choose M here: the module will be called cyttsp4_spi. +config TOUCHSCREEN_CYTTSP5 + tristate "Cypress TrueTouch Gen5 Touchscreen Driver" + depends on I2C + select REGMAP_I2C + select CRC_ITU_T + help + Driver for Parade TrueTouch Standard Product Generation 5 + touchscreen controllers. I2C bus interface support only. + + Say Y here if you have a Cypress Gen5 touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cyttsp5. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 39a8127cf6a5..0ea5c47f7fd9 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c new file mode 100644 index 000000000000..3ac45108090c --- /dev/null +++ b/drivers/input/touchscreen/cyttsp5.c @@ -0,0 +1,902 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Parade TrueTouch(TM) Standard Product V5 Module. + * + * Copyright (C) 2015 Parade Technologies + * Copyright (C) 2012-2015 Cypress Semiconductor + * Copyright (C) 2018 Bootlin + * + * Authors: Mylène Josserand + * Alistair Francis + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CYTTSP5_NAME "cyttsp5" +#define CY_I2C_DATA_SIZE (2 * 256) +#define HID_VERSION 0x0100 +#define CY_MAX_INPUT 512 +#define CYTTSP5_PREALLOCATED_CMD_BUFFER 32 +#define CY_BITS_PER_BTN 1 +#define CY_NUM_BTN_EVENT_ID GENMASK(CY_BITS_PER_BTN, 0) + +#define MAX_AREA 255 +#define HID_OUTPUT_BL_SOP 0x1 +#define HID_OUTPUT_BL_EOP 0x17 +#define HID_OUTPUT_BL_LAUNCH_APP 0x3B +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE 11 +#define HID_OUTPUT_GET_SYSINFO 0x2 +#define HID_OUTPUT_GET_SYSINFO_SIZE 5 +#define HID_OUTPUT_MAX_CMD_SIZE 12 + +#define HID_DESC_REG 0x1 +#define HID_INPUT_REG 0x3 +#define HID_OUTPUT_REG 0x4 + +#define REPORT_ID_TOUCH 0x1 +#define REPORT_ID_BTN 0x3 +#define REPORT_SIZE_5 5 +#define REPORT_SIZE_8 8 +#define REPORT_SIZE_16 16 + +/* Touch reports offsets */ +/* Header offsets */ +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT 16 +/* Record offsets */ +#define TOUCH_REPORT_DESC_CONTACTID 8 +#define TOUCH_REPORT_DESC_X 16 +#define TOUCH_REPORT_DESC_Y 32 +#define TOUCH_REPORT_DESC_P 48 +#define TOUCH_REPORT_DESC_MAJ 56 +#define TOUCH_REPORT_DESC_MIN 64 + +/* HID */ +#define HID_TOUCH_REPORT_ID 0x1 +#define HID_BTN_REPORT_ID 0x3 +#define HID_APP_RESPONSE_REPORT_ID 0x1F +#define HID_APP_OUTPUT_REPORT_ID 0x2F +#define HID_BL_RESPONSE_REPORT_ID 0x30 +#define HID_BL_OUTPUT_REPORT_ID 0x40 + +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET 2 +#define HID_OUTPUT_RESPONSE_CMD_OFFSET 4 +#define HID_OUTPUT_RESPONSE_CMD_MASK GENMASK(6, 0) + +#define HID_SYSINFO_SENSING_OFFSET 33 +#define HID_SYSINFO_BTN_OFFSET 48 +#define HID_SYSINFO_BTN_MASK GENMASK(7, 0) +#define HID_SYSINFO_MAX_BTN 8 + +#define CY_HID_OUTPUT_TIMEOUT_MS 200 +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS 3000 +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS 4000 + +/* maximum number of concurrent tracks */ +#define TOUCH_REPORT_SIZE 10 +#define TOUCH_INPUT_HEADER_SIZE 7 +#define BTN_REPORT_SIZE 9 +#define BTN_INPUT_HEADER_SIZE 5 + +#define MAX_CY_TCH_T_IDS 32 + +/* All usage pages for Touch Report */ +#define TOUCH_REPORT_USAGE_PG_X 0x00010030 +#define TOUCH_REPORT_USAGE_PG_Y 0x00010031 +#define TOUCH_REPORT_USAGE_PG_P 0x000D0030 +#define TOUCH_REPORT_USAGE_PG_CONTACTID 0x000D0051 +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT 0x000D0054 +#define TOUCH_REPORT_USAGE_PG_MAJ 0xFF010062 +#define TOUCH_REPORT_USAGE_PG_MIN 0xFF010063 +#define TOUCH_COL_USAGE_PG 0x000D0022 + +/* System Information interface definitions */ +struct cyttsp5_sensing_conf_data_dev { + u8 electrodes_x; + u8 electrodes_y; + __le16 len_x; + __le16 len_y; + __le16 res_x; + __le16 res_y; + __le16 max_z; + u8 origin_x; + u8 origin_y; + u8 btn; + u8 scan_mode; + u8 max_num_of_tch_per_refresh_cycle; +} __packed; + +struct cyttsp5_sensing_conf_data { + u16 res_x; + u16 res_y; + u16 max_z; + u16 len_x; + u16 len_y; + u8 origin_x; + u8 origin_y; + u8 max_tch; +}; + +enum cyttsp5_tch_abs { /* for ordering within the extracted touch data array */ + CY_TCH_X, /* X */ + CY_TCH_Y, /* Y */ + CY_TCH_P, /* P (Z) */ + CY_TCH_T, /* TOUCH ID */ + CY_TCH_MAJ, /* TOUCH_MAJOR */ + CY_TCH_MIN, /* TOUCH_MINOR */ + CY_TCH_NUM_ABS +}; + +struct cyttsp5_tch_abs_params { + size_t ofs; /* abs byte offset */ + size_t size; /* size in bits */ + size_t min; /* min value */ + size_t max; /* max value */ + size_t bofs; /* bit offset */ +}; + +struct cyttsp5_touch { + int abs[CY_TCH_NUM_ABS]; +}; + +struct cyttsp5_sysinfo { + struct cyttsp5_sensing_conf_data sensing_conf_data; + int num_btns; + struct cyttsp5_tch_abs_params tch_hdr; + struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS]; + u32 key_code[HID_SYSINFO_MAX_BTN]; +}; + +struct cyttsp5_hid_desc { + __le16 hid_desc_len; + u8 packet_id; + u8 reserved_byte; + __le16 bcd_version; + __le16 report_desc_len; + __le16 report_desc_register; + __le16 input_register; + __le16 max_input_len; + __le16 output_register; + __le16 max_output_len; + __le16 command_register; + __le16 data_register; + __le16 vendor_id; + __le16 product_id; + __le16 version_id; + u8 reserved[4]; +} __packed; + +struct cyttsp5 { + struct device *dev; + struct completion cmd_done; + struct cyttsp5_sysinfo sysinfo; + struct cyttsp5_hid_desc hid_desc; + u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER]; + u8 input_buf[CY_MAX_INPUT]; + u8 response_buf[CY_MAX_INPUT]; + struct gpio_desc *reset_gpio; + struct input_dev *input; + char phys[NAME_MAX]; + int num_prv_rec; + struct regmap *regmap; + struct touchscreen_properties prop; + struct regulator *vdd; +}; + +/* + * For what is understood in the datasheet, the register does not + * matter. For consistency, use the Input Register address + * but it does mean anything to the device. The important data + * to send is the I2C address + */ +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max) +{ + int error; + u32 size; + u8 temp[2]; + + /* Read the frame to retrieve the size */ + error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, sizeof(temp)); + if (error) + return error; + + size = get_unaligned_le16(temp); + if (!size || size == 2) + return 0; + + if (size > max) + return -EINVAL; + + /* Get the real value */ + return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size); +} + +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data, + size_t size) +{ + u8 cmd[HID_OUTPUT_MAX_CMD_SIZE]; + + if (size + 1 > HID_OUTPUT_MAX_CMD_SIZE) + return -E2BIG; + + /* High bytes of register address needed as first byte of cmd */ + cmd[0] = (reg >> 8) & 0xFF ; + + /* Copy the rest of the data */ + if (data) + memcpy(&cmd[1], data, size); + + /* + * The hardware wants to receive a frame with the address register + * contained in the first two bytes. As the regmap_write function + * add the register adresse in the frame, we use the low byte as + * first frame byte for the address register and the first + * data byte is the high register + left of the cmd to send + */ + return regmap_bulk_write(ts->regmap, reg & 0xFF, cmd, size + 1); +} + +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data, + int bofs) +{ + int nbyte; + + for (nbyte = 0, *axis = 0; nbyte < size; nbyte++) + *axis += ((xy_data[nbyte] >> bofs) << (nbyte * 8)); + + *axis &= max - 1; +} + +static void cyttsp5_get_touch_record(struct cyttsp5 *ts, + struct cyttsp5_touch *touch, u8 *xy_data) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + enum cyttsp5_tch_abs abs; + + for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) + cyttsp5_get_touch_axis(&touch->abs[abs], + si->tch_abs[abs].size, + si->tch_abs[abs].max, + xy_data + si->tch_abs[abs].ofs, + si->tch_abs[abs].bofs); +} + +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts, + struct cyttsp5_touch *tch, int num_cur_tch) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int i, t = 0, offset = 0; + DECLARE_BITMAP(ids, MAX_CY_TCH_T_IDS); + u8 *tch_addr; + int tmp; + + bitmap_zero(ids, MAX_CY_TCH_T_IDS); + memset(tch->abs, 0, sizeof(tch->abs)); + + switch (ts->input_buf[2]) { + case HID_TOUCH_REPORT_ID: + offset = TOUCH_INPUT_HEADER_SIZE; + break; + case HID_BTN_REPORT_ID: + offset = BTN_INPUT_HEADER_SIZE; + break; + } + + for (i = 0; i < num_cur_tch; i++) { + tch_addr = ts->input_buf + offset + (i * TOUCH_REPORT_SIZE); + cyttsp5_get_touch_record(ts, tch, tch_addr); + + /* Convert MAJOR/MINOR from mm to resolution */ + tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x; + tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x; + tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x; + tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x; + + t = tch->abs[CY_TCH_T]; + input_mt_slot(ts->input, t); + input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); + __set_bit(t, ids); + + /* position and pressure fields */ + touchscreen_report_pos(ts->input, &ts->prop, + tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y], + true); + input_report_abs(ts->input, ABS_MT_PRESSURE, + tch->abs[CY_TCH_P]); + + /* Get the extended touch fields */ + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + tch->abs[CY_TCH_MAJ]); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + tch->abs[CY_TCH_MIN]); + } + + ts->num_prv_rec = num_cur_tch; +} + +static int cyttsp5_mt_attention(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int max_tch = si->sensing_conf_data.max_tch; + struct cyttsp5_touch tch; + u8 num_cur_tch; + + cyttsp5_get_touch_axis((int *) &num_cur_tch, si->tch_hdr.size, + si->tch_hdr.max, + ts->input_buf + 3 + si->tch_hdr.ofs, + si->tch_hdr.bofs); + + if (num_cur_tch > max_tch) { + dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch); + num_cur_tch = max_tch; + } + + if (num_cur_tch == 0 && ts->num_prv_rec == 0) + return 0; + + /* extract xy_data for all currently reported touches */ + if (num_cur_tch) + cyttsp5_get_mt_touches(ts, &tch, num_cur_tch); + + input_mt_sync_frame(ts->input); + input_sync(ts->input); + + return 0; +} + +static int cyttsp5_setup_input_device(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int max_x, max_y, max_p; + int max_x_tmp, max_y_tmp; + int error; + + max_x_tmp = si->sensing_conf_data.res_x; + max_y_tmp = si->sensing_conf_data.res_y; + max_x = max_x_tmp - 1; + max_y = max_y_tmp - 1; + max_p = si->sensing_conf_data.max_z; + + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0); + + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); + input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0); + + error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, + INPUT_MT_DROP_UNUSED | INPUT_MT_DIRECT); + if (error < 0) + return error; + + error = input_register_device(ts->input); + if (error < 0) + dev_err(dev, "Error, failed register input device r=%d\n", error); + + return error; +} + +static int cyttsp5_parse_dt_key_code(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + + if (!si->num_btns) + return 0; + + /* Initialize the button to RESERVED */ + memset32(si->key_code, KEY_RESERVED, si->num_btns); + + return device_property_read_u32_array(dev, "linux,keycodes", + si->key_code, si->num_btns); +} + +static int cyttsp5_btn_attention(struct device *dev) +{ + struct cyttsp5 *ts = dev_get_drvdata(dev); + struct cyttsp5_sysinfo *si = &ts->sysinfo; + int cur_btn, offset = 0; + int cur_btn_state; + + switch (ts->input_buf[2]) { + case HID_TOUCH_REPORT_ID: + offset = TOUCH_INPUT_HEADER_SIZE; + break; + case HID_BTN_REPORT_ID: + offset = BTN_INPUT_HEADER_SIZE; + break; + } + + if (ts->input_buf[2] != HID_BTN_REPORT_ID || !si->num_btns) + return 0; + + /* extract button press/release touch information */ + for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) { + /* Get current button state */ + cur_btn_state = (ts->input_buf[offset] >> (cur_btn * CY_BITS_PER_BTN)) + & CY_NUM_BTN_EVENT_ID; + + input_report_key(ts->input, si->key_code[cur_btn], + cur_btn_state); + input_sync(ts->input); + } + + return 0; +} + +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code) +{ + u16 size, crc; + u8 status, report_id; + int command_code; + + size = get_unaligned_le16(&ts->response_buf[0]); + + if (!size) + return 0; + + report_id = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET]; + + switch (report_id) { + case HID_BL_RESPONSE_REPORT_ID: { + if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) { + dev_err(ts->dev, "HID output response, wrong SOP\n"); + return -EPROTO; + } + + if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) { + dev_err(ts->dev, "HID output response, wrong EOP\n"); + return -EPROTO; + } + + crc = crc_itu_t(0xFFFF, &ts->response_buf[4], size - 7); + if (get_unaligned_le16(&ts->response_buf[size - 3]) != crc) { + dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n", + crc); + return -EPROTO; + } + + status = ts->response_buf[5]; + if (status) { + dev_err(ts->dev, "HID output response, ERROR:%d\n", + status); + return -EPROTO; + } + break; + } + case HID_APP_RESPONSE_REPORT_ID: { + command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET] + & HID_OUTPUT_RESPONSE_CMD_MASK; + if (command_code != code) { + dev_err(ts->dev, + "HID output response, wrong command_code:%X\n", + command_code); + return -EPROTO; + } + break; + } + } + + return 0; +} + +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET] + & HID_SYSINFO_BTN_MASK; + + si->num_btns = hweight8(btns); +} + +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts) +{ + struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data; + struct cyttsp5_sensing_conf_data_dev *scd_dev = + (struct cyttsp5_sensing_conf_data_dev *) + &ts->response_buf[HID_SYSINFO_SENSING_OFFSET]; + + cyttsp5_si_get_btn_data(ts); + + scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle; + scd->res_x = get_unaligned_le16(&scd_dev->res_x); + scd->res_y = get_unaligned_le16(&scd_dev->res_y); + scd->max_z = get_unaligned_le16(&scd_dev->max_z); + scd->len_x = get_unaligned_le16(&scd_dev->len_x); + scd->len_y = get_unaligned_le16(&scd_dev->len_y); + + return 0; +} + +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts) +{ + int rc; + u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE]; + + /* HI bytes of Output register address */ + put_unaligned_le16(HID_OUTPUT_GET_SYSINFO_SIZE, cmd); + cmd[2] = HID_APP_OUTPUT_REPORT_ID; + cmd[3] = 0x0; /* Reserved */ + cmd[4] = HID_OUTPUT_GET_SYSINFO; + + rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, + HID_OUTPUT_GET_SYSINFO_SIZE); + if (rc) { + dev_err(ts->dev, "Failed to write command %d", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID output cmd execution timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO); + if (rc) { + dev_err(ts->dev, "Validation of the response failed\n"); + return rc; + } + + return cyttsp5_get_sysinfo_regs(ts); +} + +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts) +{ + int rc; + u8 cmd[HID_OUTPUT_BL_LAUNCH_APP]; + u16 crc; + + put_unaligned_le16(HID_OUTPUT_BL_LAUNCH_APP_SIZE, cmd); + cmd[2] = HID_BL_OUTPUT_REPORT_ID; + cmd[3] = 0x0; /* Reserved */ + cmd[4] = HID_OUTPUT_BL_SOP; + cmd[5] = HID_OUTPUT_BL_LAUNCH_APP; + put_unaligned_le16(0x00, &cmd[6]); + crc = crc_itu_t(0xFFFF, &cmd[4], 4); + put_unaligned_le16(crc, &cmd[8]); + cmd[10] = HID_OUTPUT_BL_EOP; + + rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd, + HID_OUTPUT_BL_LAUNCH_APP_SIZE); + if (rc) { + dev_err(ts->dev, "Failed to write command %d", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID output cmd execution timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP); + if (rc) { + dev_err(ts->dev, "Validation of the response failed\n"); + return rc; + } + + return 0; +} + +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts, + struct cyttsp5_hid_desc *desc) +{ + struct device *dev = ts->dev; + __le16 hid_desc_register = HID_DESC_REG; + int rc; + u8 cmd[2]; + + /* Set HID descriptor register */ + memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register)); + + rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0); + if (rc) { + dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc); + return rc; + } + + rc = wait_for_completion_interruptible_timeout(&ts->cmd_done, + msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT_MS)); + if (rc <= 0) { + dev_err(ts->dev, "HID get descriptor timed out\n"); + rc = -ETIMEDOUT; + return rc; + } + + memcpy(desc, ts->response_buf, sizeof(*desc)); + + /* Check HID descriptor length and version */ + if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) || + le16_to_cpu(desc->bcd_version) != HID_VERSION) { + dev_err(dev, "Unsupported HID version\n"); + return -ENODEV; + } + + return 0; +} + +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size, + int offset) +{ + tch_abs->ofs = offset / 8; + tch_abs->size = report_size / 8; + if (report_size % 8) + tch_abs->size += 1; + tch_abs->min = 0; + tch_abs->max = 1 << report_size; + tch_abs->bofs = offset - (tch_abs->ofs << 3); + + return 0; +} + +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle) +{ + struct cyttsp5 *ts = handle; + int report_id; + int size; + int error; + + error = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT); + if (error) + return IRQ_HANDLED; + + size = get_unaligned_le16(&ts->input_buf[0]); + if (size == 0) { + /* reset */ + report_id = 0; + size = 2; + } else { + report_id = ts->input_buf[2]; + } + + switch (report_id) { + case HID_TOUCH_REPORT_ID: + cyttsp5_mt_attention(ts->dev); + break; + case HID_BTN_REPORT_ID: + cyttsp5_btn_attention(ts->dev); + break; + default: + /* It is not an input but a command response */ + memcpy(ts->response_buf, ts->input_buf, size); + complete(&ts->cmd_done); + } + + return IRQ_HANDLED; +} + +static int cyttsp5_deassert_int(struct cyttsp5 *ts) +{ + u16 size; + u8 buf[2]; + int error; + + error = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, sizeof(buf)); + if (error < 0) + return error; + + size = get_unaligned_le16(&buf[0]); + if (size == 2 || size == 0) + return 0; + + return -EINVAL; +} + +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts) +{ + struct cyttsp5_sysinfo *si = &ts->sysinfo; + + fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16, + TOUCH_REPORT_DESC_X); + fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16, + TOUCH_REPORT_DESC_Y); + fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8, + TOUCH_REPORT_DESC_P); + fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5, + TOUCH_REPORT_DESC_CONTACTID); + fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5, + TOUCH_REPORT_DESC_HDR_CONTACTCOUNT); + fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8, + TOUCH_REPORT_DESC_MAJ); + fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8, + TOUCH_REPORT_DESC_MIN); + + return 0; +} + +static int cyttsp5_startup(struct cyttsp5 *ts) +{ + int error; + + error = cyttsp5_deassert_int(ts); + if (error) { + dev_err(ts->dev, "Error on deassert int r=%d\n", error); + return -ENODEV; + } + + /* + * Launch the application as the device starts in bootloader mode + * because of a power-on-reset + */ + error = cyttsp5_hid_output_bl_launch_app(ts); + if (error < 0) { + dev_err(ts->dev, "Error on launch app r=%d\n", error); + return error; + } + + error = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc); + if (error < 0) { + dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", error); + return error; + } + + error = cyttsp5_fill_all_touch(ts); + if (error < 0) { + dev_err(ts->dev, "Error on report descriptor r=%d\n", error); + return error; + } + + error = cyttsp5_hid_output_get_sysinfo(ts); + if (error) { + dev_err(ts->dev, "Error on getting sysinfo r=%d\n", error); + return error; + } + + return error; +} + +static void cyttsp5_cleanup(void *data) +{ + struct cyttsp5 *ts = data; + + regulator_disable(ts->vdd); +} + +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name) +{ + struct cyttsp5 *ts; + struct cyttsp5_sysinfo *si; + int error, i; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + /* Initialize device info */ + ts->regmap = regmap; + ts->dev = dev; + si = &ts->sysinfo; + dev_set_drvdata(dev, ts); + + init_completion(&ts->cmd_done); + + /* Power up the device */ + ts->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(ts->vdd)) { + error = PTR_ERR(ts->vdd); + return error; + } + + error = devm_add_action_or_reset(dev, cyttsp5_cleanup, ts); + if (error) { + return error; + } + + error = regulator_enable(ts->vdd); + if (error) { + return error; + } + + ts->input = devm_input_allocate_device(dev); + if (!ts->input) { + dev_err(dev, "Error, failed to allocate input device\n"); + return -ENODEV; + } + + ts->input->name = "cyttsp5"; + scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + ts->input->phys = ts->phys; + input_set_drvdata(ts->input, ts); + + /* Reset the gpio to be in a reset state */ + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(dev, "Failed to request reset gpio, error %d\n", error); + return error; + } + gpiod_set_value(ts->reset_gpio, 0); + + /* Need a delay to have device up */ + msleep(20); + + error = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq, + IRQF_ONESHOT, name, ts); + if (error) { + dev_err(dev, "unable to request IRQ\n"); + return error; + } + + error = cyttsp5_startup(ts); + if (error) { + dev_err(ts->dev, "Fail initial startup r=%d\n", error); + return error; + } + + error = cyttsp5_parse_dt_key_code(dev); + if (error < 0) { + dev_err(ts->dev, "Error while parsing dts %d\n", error); + return error; + } + + touchscreen_parse_properties(ts->input, true, &ts->prop); + + __set_bit(EV_KEY, ts->input->evbit); + for (i = 0; i < si->num_btns; i++) + __set_bit(si->key_code[i], ts->input->keybit); + + return cyttsp5_setup_input_device(dev); +} + +static int cyttsp5_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + }; + + regmap = devm_regmap_init_i2c(client, &config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap allocation failed: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return cyttsp5_probe(&client->dev, regmap, client->irq, client->name); +} + +static const struct of_device_id cyttsp5_of_match[] = { + { .compatible = "cypress,tt21000", }, + { } +}; +MODULE_DEVICE_TABLE(of, cyttsp5_of_match); + +static const struct i2c_device_id cyttsp5_i2c_id[] = { + { CYTTSP5_NAME, 0, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id); + +static struct i2c_driver cyttsp5_i2c_driver = { + .driver = { + .name = CYTTSP5_NAME, + .of_match_table = cyttsp5_of_match, + }, + .probe = cyttsp5_i2c_probe, + .id_table = cyttsp5_i2c_id, +}; +module_i2c_driver(cyttsp5_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product"); +MODULE_AUTHOR("Mylène Josserand "); From patchwork Wed Mar 23 12:00:19 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12789735 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D1E2EC433FE for ; Wed, 23 Mar 2022 12:00:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244060AbiCWMCR (ORCPT ); Wed, 23 Mar 2022 08:02:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50562 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244044AbiCWMCR (ORCPT ); Wed, 23 Mar 2022 08:02:17 -0400 Received: from wout2-smtp.messagingengine.com (wout2-smtp.messagingengine.com [64.147.123.25]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 612857A9A5; Wed, 23 Mar 2022 05:00:43 -0700 (PDT) Received: from compute1.internal (compute1.nyi.internal [10.202.2.41]) by mailout.west.internal (Postfix) with ESMTP id 14D743201FCD; Wed, 23 Mar 2022 08:00:42 -0400 (EDT) Received: from mailfrontend2 ([10.202.2.163]) by compute1.internal (MEProxy); Wed, 23 Mar 2022 08:00:42 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm1; bh=l1C3ccDGgcE7nR aC9V8NEemh9Ww1O1X8v8EZwzGnGZM=; b=OmRVNn2q44YDbguUD6dB7kL5IL5+Fq WRSal3peEY8VbgBU8Q5OIvbf1h5qAKNnzB8D0fxOwt/f60T/q7oorHGADpiJJrgl NyZVJRiAgnlOLk5DoH1Enjfs+iM+Qnz7fF2Vq+/VRh5X7WJCn/ZhdqU/xdrH45mx Vvkai8R6H51WqRVcsEc8pWgKosrUowY2vbtqd/9P/NZN2ABCW/Tmd7N5HPHbGcHn rEsT9ksD5DednZw9P1tJMcnt25ObEDk7+btadY8cOXWHdq/SM4KSOSYCmXacthSe q6ajzePbx+fOAk3YBMgfXEnZwUFWpeAN3LOlBQiw8eTmLEzbVr7IyuDg== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm3; bh=l1C3cc DGgcE7nRaC9V8NEemh9Ww1O1X8v8EZwzGnGZM=; b=i0KAvIBfnOar1VNwUMCtN6 CgDIFYLd2OymuUQvlILJHexzR7nyv+JH7CciYfFLjnIS4jhnNh1SNjwI0Fq5qhPd Ot4+Co4fs8KioWrqlO8KS0B4yusk9pfksz2bxxljGXs2REJAKtrVIGqrNS1opada 0ITWEFYMOdajAwDGJlb2RwUVnUUjTenag/WLgqtzMZfqGWy3NlAMkoIOejpQZ5cX 765XT5h3WLpCunM9j7iqEPqaCqwM1q1n6hrI9LjE60Sz2lyHNJ+Qq5eZLQANi8Zo KMa/Cug/JX+muXG1YhtqzsMGbJloo2+WR5bbVqJoaqIZckWVSFkqgXdn1epIJPZA == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrudegjedgfedvucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucenucfjughrpefhvffufffkofgjfhgggfestdekre dtredttdenucfhrhhomheptehlihhsthgrihhrucfhrhgrnhgtihhsuceorghlihhsthgr ihhrsegrlhhishhtrghirhdvfedrmhgvqeenucggtffrrghtthgvrhhnpefftdfhgfeggf elgfekjefhkeeigfelleefhfethfehfeetleeggeeggfefffdvtdenucffohhmrghinhep uggvvhhitggvthhrvggvrdhorhhgnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrg hmpehmrghilhhfrhhomheprghlihhsthgrihhrsegrlhhishhtrghirhdvfedrmhgv X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 23 Mar 2022 08:00:37 -0400 (EDT) From: Alistair Francis To: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: alistair23@gmail.com, rydberg@bitmath.org, linus.walleij@linaro.org, robh+dt@kernel.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, Alistair Francis Subject: [PATCH v7 2/4] dt-bindings: input: Add Cypress TT2100 touchscreen controller Date: Wed, 23 Mar 2022 22:00:19 +1000 Message-Id: <20220323120021.361137-3-alistair@alistair23.me> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220323120021.361137-1-alistair@alistair23.me> References: <20220323120021.361137-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings documentation. It can use I2C or SPI bus. This touchscreen can handle some defined zone that are designed and sent as button. To be able to customize the keycode sent, the "linux,code" property in a "button" sub-node can be used. Signed-off-by: Alistair Francis Reviewed-by: Linus Walleij Reviewed-by: Rob Herring --- .../input/touchscreen/cypress,tt21000.yaml | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml new file mode 100644 index 000000000000..3fc4b7011040 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress TT2100 touchscreen controller + +description: The Cypress TT2100 series (also known as "CYTTSP5" after + the marketing name Cypress TrueTouch Standard Product series 5). + +maintainers: + - Alistair Francis + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,tt21000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator for voltage. + + reset-gpios: + maxItems: 1 + + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + +patternProperties: + "^button@[0-9]+$": + type: object + properties: + reg: + maxItems: 1 + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Keycode to emit + + required: + - reg + - linux,keycodes + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@24 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_reset_ds203>; + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + + button@0 { + reg = <0>; + linux,keycodes = ; + }; + + button@1 { + reg = <1>; + linux,keycodes = ; + }; + + button@2 { + reg = <2>; + linux,keycodes = ; + }; + }; + }; +... From patchwork Wed Mar 23 12:00:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12789736 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 05A04C4332F for ; Wed, 23 Mar 2022 12:00:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244050AbiCWMCT (ORCPT ); Wed, 23 Mar 2022 08:02:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50566 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244048AbiCWMCS (ORCPT ); Wed, 23 Mar 2022 08:02:18 -0400 Received: from wout2-smtp.messagingengine.com (wout2-smtp.messagingengine.com [64.147.123.25]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 61DC77A995; Wed, 23 Mar 2022 05:00:49 -0700 (PDT) Received: from compute2.internal (compute2.nyi.internal [10.202.2.46]) by mailout.west.internal (Postfix) with ESMTP id 2A6133201F80; Wed, 23 Mar 2022 08:00:48 -0400 (EDT) Received: from mailfrontend2 ([10.202.2.163]) by compute2.internal (MEProxy); Wed, 23 Mar 2022 08:00:48 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm1; bh=67atGgUSBw8jUX 7eYhj353ns5QGeD6hSpEVQq+z2PS0=; b=m5FVksxFZ7N7ME370farG1KL3K+OYQ BkQmlcGUHXnfH3GKpla4/ZstfAFXT+UHE0outqT5esvBChxcZNsAOAnYQPXgS+zE b19Pl2TYqphlDkOGrIKngw1iTk263xn4pkOtQ9tH3uJESAGbb5AGYLtRcXAIGOhT 79sQy1s3Zqt4b9yGWyTvIb/NbfZN/4wBqmzHSFc1sJ0nigxO44kozwtdgIIJLQMh 0ARfvCKjNt5sPOuS+2/hsMZiNGMsMjE1V/8+PP2yelbUU88CZ0qTbVTwlyoAi4E+ 2bxMFnL5V/WDEQ8vR6elHU5hlPX1XDbzncTgXivmLQr5UoU1EZl0fG9w== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm3; bh=67atGg USBw8jUX7eYhj353ns5QGeD6hSpEVQq+z2PS0=; b=bi3VmLe2XsBYsRaiFRpeL3 Dx57CVln7fCFOWqHvqp/PFAErz2MzUUKBsQWGl1lh149zl/n9GZq5dONyEfH6JvU GGodiToP+VpAFJC0ldw3pF2TWK721kUO+4aL6P9yNqEx/lgH7w5ouAa6vKoftTLp Q0mqIh3yR7DEu/kb49sPRSvqiwlBYxV6HHWtevguah3FOJYZBRPLdFlommLO0Mop PHOEi4WwDqGoZi5HlF1Q0XB4Z5sNH1iSjOocw2VYrydYhaQ/KNAFoR/LUotPR8LB 92O8rFQz+F6dP5yoVmQ9e/4dgIPmxFdl/x2+Zbz/9BW4I34YCUR9kplxBImcxwqA == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrudegjedgfeefucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucenucfjughrpefhvffufffkofgjfhgggfestdekre dtredttdenucfhrhhomheptehlihhsthgrihhrucfhrhgrnhgtihhsuceorghlihhsthgr ihhrsegrlhhishhtrghirhdvfedrmhgvqeenucggtffrrghtthgvrhhnpeeggedtteejke eggeeugfehueevudegvdetjeeviedugedvtdekffekhedtteduhfenucevlhhushhtvghr ufhiiigvpedtnecurfgrrhgrmhepmhgrihhlfhhrohhmpegrlhhishhtrghirhesrghlih hsthgrihhrvdefrdhmvg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 23 Mar 2022 08:00:43 -0400 (EDT) From: Alistair Francis To: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: alistair23@gmail.com, rydberg@bitmath.org, linus.walleij@linaro.org, robh+dt@kernel.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, Alistair Francis Subject: [PATCH v7 3/4] ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen Date: Wed, 23 Mar 2022 22:00:20 +1000 Message-Id: <20220323120021.361137-4-alistair@alistair23.me> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220323120021.361137-1-alistair@alistair23.me> References: <20220323120021.361137-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Signed-off-by: Alistair Francis --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 37ec95fce3be..dd864b7eb562 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_AD7879=y CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_CYTTSP5=y CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y From patchwork Wed Mar 23 12:00:21 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alistair Francis X-Patchwork-Id: 12789737 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 96597C433F5 for ; Wed, 23 Mar 2022 12:00:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244065AbiCWMC1 (ORCPT ); Wed, 23 Mar 2022 08:02:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50824 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244048AbiCWMCY (ORCPT ); Wed, 23 Mar 2022 08:02:24 -0400 Received: from wout2-smtp.messagingengine.com (wout2-smtp.messagingengine.com [64.147.123.25]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9A7DF7A9AA; Wed, 23 Mar 2022 05:00:55 -0700 (PDT) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailout.west.internal (Postfix) with ESMTP id 542BD3200C14; Wed, 23 Mar 2022 08:00:54 -0400 (EDT) Received: from mailfrontend2 ([10.202.2.163]) by compute3.internal (MEProxy); Wed, 23 Mar 2022 08:00:55 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alistair23.me; h=cc:cc:content-transfer-encoding:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm1; bh=hC7X5s7HQc6viR 9PYr+JWHUjZSf2EJs42JixYxm/GUk=; b=Vwvtf8uz64RJAN1RwMGE1LktKYKT3p FmDL6lnQG8yjgqqADVZ6AuJHVV2OBbaRdgxhwpt3kbSr3ZJ4yNOMX/kK/KyeJySL abhDm4GvdLoNp5n4eeEAVGTHEsgr6U06X3/KLfi/X+G2yG/Xo53nAmAoeJn4ySee AMRmwbNR6ff1KRbMCwRtCnDuQSH8Yv8JSnBLcufPqbWlmp9qo9lesu6IeO1I5Vhy Clm/aFqu9qwmEFhWdKPse5hfBCrWH6YResE41HNYmBC9cgRfLXWBYZ4uPlPdhY6p dim4irdlTIPEg/hoK9+ufPOuV1kvFnyDK+Hm8iBHweebuGorkS0dMn5w== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm3; bh=hC7X5s 7HQc6viR9PYr+JWHUjZSf2EJs42JixYxm/GUk=; b=W42ngcLU9LbL/r588aAs5A tHqeNqqdk06SYG0Ip/JiUmLBcAxNDU8hFbUYHeIyIhSRXJ/FstyuxRhhMlaJYyoy NlwN7tRlkGfg6Rvut1/t7US7pP9GiGOHGfpl1ay+Qggcan0r14MFd5Mdq9i2DsoO EIkgl+BrbRKAa8ALQZr1KLt4HuzTWN8d4gNIYojDrNSTM0Lr45UZKQtCE5YdEHil ZRKUbWyaS8RFEaNlaUcaB0I7CYxeV+0t0gQ7wyTV7IAItr+GyOsJzSmAmLFo8WfM bb2dy8cJDg23iofso0WeP+Oy+RecLfzuXbQqaUwwVrgKnDUieWtn+K4fa7IePnKA == X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvvddrudegjedgfeefucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucenucfjughrpefhvffufffkofgjfhgggfestdekre dtredttdenucfhrhhomheptehlihhsthgrihhrucfhrhgrnhgtihhsuceorghlihhsthgr ihhrsegrlhhishhtrghirhdvfedrmhgvqeenucggtffrrghtthgvrhhnpeeggedtteejke eggeeugfehueevudegvdetjeeviedugedvtdekffekhedtteduhfenucevlhhushhtvghr ufhiiigvpedtnecurfgrrhgrmhepmhgrihhlfhhrohhmpegrlhhishhtrghirhesrghlih hsthgrihhrvdefrdhmvg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 23 Mar 2022 08:00:49 -0400 (EDT) From: Alistair Francis To: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: alistair23@gmail.com, rydberg@bitmath.org, linus.walleij@linaro.org, robh+dt@kernel.org, dmitry.torokhov@gmail.com, andreas@kemnade.info, Alistair Francis Subject: [PATCH v7 4/4] ARM: dts: imx7d-remarkable2: Enable the cyttsp5 Date: Wed, 23 Mar 2022 22:00:21 +1000 Message-Id: <20220323120021.361137-5-alistair@alistair23.me> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220323120021.361137-1-alistair@alistair23.me> References: <20220323120021.361137-1-alistair@alistair23.me> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Add support for the cyttsp5 touchscreen controller for the reMarkable 2. Signed-off-by: Alistair Francis --- arch/arm/boot/dts/imx7d-remarkable2.dts | 100 ++++++++++++++++++++++++ 1 file changed, 100 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 03a4029e1e57..b0c5bea32a09 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include / { model = "reMarkable 2.0"; @@ -78,6 +79,18 @@ reg_sdoe: regulator-sdoe { enable-active-high; }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_touch_reg>; + pinctrl-1 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -125,6 +138,70 @@ wacom_digitizer: digitizer@9 { }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + tsc@24 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "cypress,tt21000"; + reg = <0x24>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + + button@0 { + reg = <0>; + linux,keycodes = ; + }; + + button@1 { + reg = <1>; + linux,keycodes = ; + }; + + button@2 { + reg = <2>; + linux,keycodes = ; + }; + + button@3 { + reg = <3>; + linux,keycodes = ; + }; + + button@4 { + reg = <4>; + linux,keycodes = ; + }; + + button@5 { + reg = <5>; + linux,keycodes = ; + }; + + button@6 { + reg = <6>; + linux,keycodes = ; + }; + + button@7 { + reg = <7>; + linux,keycodes = ; + }; + }; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "sleep"; @@ -266,6 +343,15 @@ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -273,6 +359,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f @@ -320,6 +413,13 @@ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 >; }; + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79