From patchwork Wed Jan 9 13:42:04 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Philippe Schenker X-Patchwork-Id: 10754103 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id F073591E for ; Wed, 9 Jan 2019 13:42:49 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id DD89528EC8 for ; Wed, 9 Jan 2019 13:42:49 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id D07C428F1C; Wed, 9 Jan 2019 13:42:49 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id DF5AF28EC8 for ; Wed, 9 Jan 2019 13:42:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731257AbfAINml (ORCPT ); Wed, 9 Jan 2019 08:42:41 -0500 Received: from mxout013.mail.hostpoint.ch ([217.26.49.173]:11760 "EHLO mxout013.mail.hostpoint.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730995AbfAINmj (ORCPT ); Wed, 9 Jan 2019 08:42:39 -0500 Received: from [10.0.2.45] (helo=asmtp012.mail.hostpoint.ch) by mxout013.mail.hostpoint.ch with esmtp (Exim 4.91 (FreeBSD)) (envelope-from ) id 1ghE7n-0002he-5B; Wed, 09 Jan 2019 14:42:27 +0100 Received: from 252.222.41.212.static.wline.lns.sme.cust.swisscom.ch ([212.41.222.252] helo=philippe-pc.toradex.int) by asmtp012.mail.hostpoint.ch with esmtpsa (TLSv1.2:ECDHE-RSA-AES256-GCM-SHA384:256) (Exim 4.91 (FreeBSD)) (envelope-from ) id 1ghE7m-0006KA-U2; Wed, 09 Jan 2019 14:42:27 +0100 X-Authenticated-Sender-Id: dev@pschenker.ch From: Philippe Schenker To: jic23@kernel.org, marcel.ziswiler@toradex.com, stefan@agner.ch Cc: robh@kernel.org, alexandre.torgue@st.com, shawnguo@kernel.org, dmitry.torokhov@gmail.com, thierry.reding@gmail.com, mcoquelin.stm32@gmail.com, digetx@gmail.com, lee.jones@linaro.org, Max Krummenacher , Philippe Schenker , Jonathan Cameron , Mark Brown , Arnaud Pouliquen , linux-iio@vger.kernel.org, Geert Uytterhoeven , Stefan Popa , William Breathitt Gray , linux-stm32@st-md-mailman.stormreply.com, Randy Dunlap , Marcus Folkesson , Freeman Liu , Eugen Hristev , Peter Meerwald-Stadler , Charles-Antoine Couret , Jonathan Bakker , Hartmut Knaack , linux-arm-kernel@lists.infradead.org, Siddartha Mohanadoss , linux-kernel@vger.kernel.org, Lars-Peter Clausen , Kent Gustavsson Subject: [PATCH v6 5/8] iio: adc: add STMPE ADC driver using IIO framework Date: Wed, 9 Jan 2019 14:42:04 +0100 Message-Id: <20190109134208.5660-6-dev@pschenker.ch> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190109134208.5660-1-dev@pschenker.ch> References: <20190109134208.5660-1-dev@pschenker.ch> MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Stefan Agner This adds an ADC driver for the STMPE device using the industrial input/output interface. The driver supports raw reading of values. The driver depends on the MFD STMPE driver. If the touchscreen block is enabled too, only four of the 8 ADC channels are available. Signed-off-by: Stefan Agner Signed-off-by: Max Krummenacher Signed-off-by: Philippe Schenker Reviewed-by: Jonathan Cameron --- Changes in v6: None Changes in v5: - Removed devm_add_action_or_reset - Changed iio_device_register to devm_iio_device_register - Added Jonathan Cameron's Reviewed-by - Added correct author of commit, as this changed by accident Changes in v4: - Moved MFD changes to a precursor patch - Moved stmpe-ts changes to a precursor patch - Created stmpe_read_temp and stmpe_read_voltage functions to make read_raw more readable - Added local lock instead of using indio_dev's mlock - Use be16_to_cpu() macro instead of bitshifting - Added stmpe_enable again to stmpe_adc_init_hw - Use devm_add_action_or_reset to get rid of the remove function (I tested if that actually works) Changes in v3: - Removed COMPILE_TEST from dependings in Kconfig - Removed stmpe_adc_get_platform_info() function and integrated the few code lines in the other function Changes in v2: - Code formatting - Removed unused includes - Defined the macro STMPE_START_ONE_TEMP_CONV with other macros. - Added new macro that defines the channel of the temperature sensor. Took new name for STMPE_MAX_ADC->STMPE_ADC_LAST_NR and used it throughout the code for better readability. - Added mutex_unlock where missing. drivers/iio/adc/Kconfig | 7 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/stmpe-adc.c | 363 ++++++++++++++++++++++++++++++++++++ 3 files changed, 371 insertions(+) create mode 100644 drivers/iio/adc/stmpe-adc.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7a3ca4ec0cb7..5b72e2963153 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -755,6 +755,13 @@ config STM32_DFSDM_ADC This driver can also be built as a module. If so, the module will be called stm32-dfsdm-adc. +config STMPE_ADC + tristate "STMicroelectronics STMPE ADC driver" + depends on OF && MFD_STMPE + help + Say yes here to build support for ST Microelectronics STMPE + built-in ADC block (stmpe811). + config STX104 tristate "Apex Embedded Systems STX104 driver" depends on PC104 && X86 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 07df37f621bd..6d4e3149ac15 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o +obj-$(CONFIG_STMPE_ADC) += stmpe-adc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c new file mode 100644 index 000000000000..37f4b74a5d32 --- /dev/null +++ b/drivers/iio/adc/stmpe-adc.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STMPE811 IIO ADC Driver + * + * 4 channel, 10/12-bit ADC + * + * Copyright (C) 2013-2018 Toradex AG + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_INT_EN 0x0E +#define STMPE_REG_ADC_INT_STA 0x0F + +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_ADC_CAPT 0x22 +#define STMPE_REG_ADC_DATA_CH(channel) (0x30 + 2 * (channel)) + +#define STMPE_REG_TEMP_CTRL 0x60 +#define STMPE_TEMP_CTRL_ENABLE BIT(0) +#define STMPE_TEMP_CTRL_ACQ BIT(1) +#define STMPE_TEMP_CTRL_THRES_EN BIT(3) +#define STMPE_START_ONE_TEMP_CONV (STMPE_TEMP_CTRL_ENABLE | \ + STMPE_TEMP_CTRL_ACQ | \ + STMPE_TEMP_CTRL_THRES_EN) +#define STMPE_REG_TEMP_DATA 0x61 +#define STMPE_REG_TEMP_TH 0x63 +#define STMPE_ADC_LAST_NR 7 +#define STMPE_TEMP_CHANNEL (STMPE_ADC_LAST_NR + 1) + +#define STMPE_ADC_CH(channel) ((1 << (channel)) & 0xff) + +#define STMPE_ADC_TIMEOUT msecs_to_jiffies(1000) + +struct stmpe_adc { + struct stmpe *stmpe; + struct clk *clk; + struct device *dev; + struct mutex lock; + + /* We are allocating plus one for the temperature channel */ + struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2]; + + struct completion completion; + + u8 channel; + u32 value; +}; + +static int stmpe_read_voltage(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel > STMPE_ADC_LAST_NR) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, + STMPE_ADC_CH(info->channel)); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, + STMPE_ADC_CH(info->channel)); + + *val = info->value; + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + *val = info->value; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_temp(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel != STMPE_TEMP_CHANNEL) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL, + STMPE_START_ONE_TEMP_CONV); + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + /* + * absolute temp = +V3.3 * value /7.51 [K] + * scale to [milli °C] + */ + *val = ((449960l * info->value) / 1024l) - 273150; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct stmpe_adc *info = iio_priv(indio_dev); + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + + switch (chan->type) { + case IIO_VOLTAGE: + ret = stmpe_read_voltage(info, chan, val); + break; + + case IIO_TEMP: + ret = stmpe_read_temp(info, chan, val); + break; + default: + return -EINVAL; + } + + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 3300; + *val2 = info->stmpe->mod_12b ? 12 : 10; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t stmpe_adc_isr(int irq, void *dev_id) +{ + struct stmpe_adc *info = (struct stmpe_adc *)dev_id; + u16 data; + + if (info->channel > STMPE_TEMP_CHANNEL) + return IRQ_NONE; + + if (info->channel <= STMPE_ADC_LAST_NR) { + int int_sta; + + int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA); + + /* Is the interrupt relevant */ + if (!(int_sta & STMPE_ADC_CH(info->channel))) + return IRQ_NONE; + + /* Read value */ + stmpe_block_read(info->stmpe, + STMPE_REG_ADC_DATA_CH(info->channel), 2, (u8 *) &data); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta); + } else if (info->channel == STMPE_TEMP_CHANNEL) { + /* Read value */ + stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2, + (u8 *) &data); + } + + info->value = (u32) be16_to_cpu(data); + complete(&info->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info stmpe_adc_iio_info = { + .read_raw = &stmpe_read_raw, +}; + +static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_VOLTAGE; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + ics->indexed = 1; + ics->channel = chan; +} + +static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_TEMP; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED); + ics->indexed = 1; + ics->channel = chan; +} + +static int stmpe_adc_init_hw(struct stmpe_adc *adc) +{ + int ret; + struct stmpe *stmpe = adc->stmpe; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC); + if (ret) { + dev_err(stmpe->dev, "Could not enable clock for ADC\n"); + return ret; + } + + ret = stmpe811_adc_common_init(stmpe); + if (ret) { + stmpe_disable(stmpe, STMPE_BLOCK_ADC); + return ret; + } + + /* use temp irq for each conversion completion */ + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0); + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0); + + return 0; +} + +static int stmpe_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct stmpe_adc *info; + struct device_node *np; + u32 norequest_mask = 0; + int irq_temp, irq_adc; + int num_chan = 0; + int i = 0; + int ret; + + irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC"); + if (irq_adc < 0) + return irq_adc; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + mutex_init(&info->lock); + + init_completion(&info->completion); + ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + irq_adc); + return ret; + } + + irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS"); + if (irq_temp >= 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) + dev_warn(&pdev->dev, "failed requesting irq for" + " temp sensor, irq = %d\n", irq_temp); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &stmpe_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + info->stmpe = dev_get_drvdata(pdev->dev.parent); + + np = pdev->dev.of_node; + + if (!np) + dev_err(&pdev->dev, "no device tree node found\n"); + + of_property_read_u32(np, "st,norequest-mask", &norequest_mask); + + for_each_clear_bit(i, (unsigned long *) &norequest_mask, + (STMPE_ADC_LAST_NR + 1)) { + stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + } + stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + indio_dev->channels = info->stmpe_adc_iio_channels; + indio_dev->num_channels = num_chan; + + ret = stmpe_adc_init_hw(info); + if (ret) + return ret; + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static int __maybe_unused stmpe_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct stmpe_adc *info = iio_priv(indio_dev); + + stmpe_adc_init_hw(info); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume); + +static struct platform_driver stmpe_adc_driver = { + .probe = stmpe_adc_probe, + .driver = { + .name = "stmpe-adc", + .pm = &stmpe_adc_pm_ops, + }, +}; + +module_platform_driver(stmpe_adc_driver); + +MODULE_AUTHOR("Stefan Agner "); +MODULE_DESCRIPTION("STMPEXXX ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:stmpe-adc"); From patchwork Wed Jan 9 13:42:05 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Philippe Schenker X-Patchwork-Id: 10754111 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 82393746 for ; Wed, 9 Jan 2019 13:43:06 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7055528EC8 for ; Wed, 9 Jan 2019 13:43:06 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 63A0928F1C; Wed, 9 Jan 2019 13:43:06 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id B08DF28EC8 for ; Wed, 9 Jan 2019 13:43:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731201AbfAINmf (ORCPT ); Wed, 9 Jan 2019 08:42:35 -0500 Received: from mxout014.mail.hostpoint.ch ([217.26.49.174]:49467 "EHLO mxout014.mail.hostpoint.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730795AbfAINme (ORCPT ); Wed, 9 Jan 2019 08:42:34 -0500 Received: from [10.0.2.45] (helo=asmtp012.mail.hostpoint.ch) by mxout014.mail.hostpoint.ch with esmtp (Exim 4.91 (FreeBSD)) (envelope-from ) id 1ghE7o-0007Zg-8M; Wed, 09 Jan 2019 14:42:28 +0100 Received: from 252.222.41.212.static.wline.lns.sme.cust.swisscom.ch ([212.41.222.252] helo=philippe-pc.toradex.int) by asmtp012.mail.hostpoint.ch with esmtpsa (TLSv1.2:ECDHE-RSA-AES256-GCM-SHA384:256) (Exim 4.91 (FreeBSD)) (envelope-from ) id 1ghE7o-0006KA-24; Wed, 09 Jan 2019 14:42:28 +0100 X-Authenticated-Sender-Id: dev@pschenker.ch From: Philippe Schenker To: jic23@kernel.org, marcel.ziswiler@toradex.com, stefan@agner.ch Cc: robh@kernel.org, alexandre.torgue@st.com, shawnguo@kernel.org, dmitry.torokhov@gmail.com, thierry.reding@gmail.com, mcoquelin.stm32@gmail.com, digetx@gmail.com, lee.jones@linaro.org, Max Krummenacher , Philippe Schenker , Jonathan Cameron , devicetree@vger.kernel.org, linux-iio@vger.kernel.org, Hartmut Knaack , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Peter Meerwald-Stadler , linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, Lars-Peter Clausen Subject: [PATCH v6 6/8] iio: adc: add STMPE ADC devicetree bindings Date: Wed, 9 Jan 2019 14:42:05 +0100 Message-Id: <20190109134208.5660-7-dev@pschenker.ch> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190109134208.5660-1-dev@pschenker.ch> References: <20190109134208.5660-1-dev@pschenker.ch> MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Stefan Agner This adds the devicetree bindings for the STMPE ADC. This also corrects a typo in st,sample-time it is rather "6 -> 124 clocks" according to the datasheet and not 144. We need to use the naming stmpe_adc in devicetree because this is given by the mfd device. Signed-off-by: Stefan Agner Signed-off-by: Max Krummenacher Signed-off-by: Philippe Schenker Reviewed-by: Jonathan Cameron Reviewed-by: Rob Herring --- Changes in v6: - Added Rob's Reviewed-by Changes in v5: - Made a one column list - Cleared note about precedence - Changed example to a full STMPE811 device with MFD, touchscreen, and the new stmpe_adc driver. - Added Jonathan Cameron's Reviewed-by Changes in v4: - Put reformatting in a separate precursor patch. Changes in v3: - Reformatted documentation for touchscreen to use tabs and have a better overview of the settings. - Added note which adc-settings will take precedence. - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated in the datasheet. Changes in v2: - Moved the bindings for ADC to the overlying mfd. - Reformatted for better readability .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 +++++ .../bindings/input/touchscreen/stmpe.txt | 88 +++++++++++++------ .../devicetree/bindings/mfd/stmpe.txt | 14 +++ 3 files changed, 98 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 000000000000..480e66422625 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index bf66a55a7de5..c549924603d2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,24 +5,6 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 144 clocks -- st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC -- st,ref-sel : ADC reference source - 0 -> internal - 1 -> external -- st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - st,ave-ctrl : Sample average control 0 -> 1 sample 1 -> 2 samples @@ -52,20 +34,76 @@ Optional properties: 0 -> 20 mA (typical 35mA max) 1 -> 50 mA (typical 80 mA max) +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz + Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index a46e7177195d..d4408a417193 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -14,6 +14,20 @@ Optional properties: - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - irq-gpio : If present, which GPIO to use for event IRQ +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz + Example: stmpe1601: stmpe1601@40 {