From patchwork Thu May 19 16:45:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Morgan X-Patchwork-Id: 12855787 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 5CD83C433FE for ; Thu, 19 May 2022 16:46:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=bSiTeA49QvwjAPWnZCjbSrBAz+oiM/vjoFqoUUrzmyg=; b=crdNPdXzJqzZbz AmEeC0mNzAJl8udBHFgA0lP4uGZGtvgXNHgq45VCc2KJkOC5/zVYsOIUTcGtLf9uKEmzJ0p9Ba9EJ 5StcVY/FDuJE9WkmEkYM3RedsqVjCqBbXWPvKrJb8908H2GY2MEwaW3peLT4ynY6bpjQxLhaJEiU5 z0hNrg6qkRbnsVm94+qD8A4NgOGDfboNi3F98MNBZK7Iaa7XTvAF3oprM5cphru3bElyBQmUlX3g1 LtcbolwRlklIF2CgE5kT8MQwfv2/Y0j3YQ7TX6Qm4raREe3DD0ZRKqsSwepLX3VZSlrpDOG0xM8pT rKsaDpjIknCCyXawGZ0g==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHb-008Snc-GH; Thu, 19 May 2022 16:45:51 +0000 Received: from mail-oo1-xc2f.google.com ([2607:f8b0:4864:20::c2f]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHW-008Sks-Jh for linux-rockchip@lists.infradead.org; Thu, 19 May 2022 16:45:48 +0000 Received: by mail-oo1-xc2f.google.com with SMTP id f2-20020a4a8f42000000b0035e74942d42so1084919ool.13 for ; Thu, 19 May 2022 09:45:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=za+JFS8UrUe1EXtSy/HN8YRbGNE25Vj78rAPO0Rkf/g=; b=cg6+vIhCSI7HHV/IeYX98FFMnomiDXGC8qXPpKRbECi9S5ZPJM/TJ6XLIZGo1Rmtzn WubFecTLsBClsoR+g6p1nKIOFb78/bSf4q/MGpl6ATisNNCM4al5jpUhisyKdbJPYQm4 DniJUGei56MYcf7txmuimwp1geQYYf0ROpbQqrNIZM8WwczMVlgclvFw5oHrzcEArE4X 821NNnf+nfcY6a0cgayYSzy/ht6XZ0saVVLfwAqsXE6dQZgJjHsTz8e8EOkGQxXbG+GG ZIgnTwMYWun0XI3m5LNFIHDjTDH0VX2QwGMtzB1c8oncBk82kZ6v0/7H8eBPDYuRrxcz t5YA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=za+JFS8UrUe1EXtSy/HN8YRbGNE25Vj78rAPO0Rkf/g=; b=RnmpEgGx+zjd0y/X7REbTt0KLrTUovuW697Sy8xRFbqcvWy77QcXWxw0SGAdgsXl0u /RVgC87dg52JJDwRHQ1SUCwKLr78XGDTPivPx3RbXXe3Crm9ZtCj3z8ZFVe8mwYwTTgu XHAA5/hSJmEhAyeTnxS1PNTZrQlxqAK8m2TWaB9Y9jhxdOA7i6Hn96ffs94/ws5edzxm luK5WBIqZ6Jtysx9ZvUadCFT1Ittjmm60eb8/cBjduybLcZ6TK81cXmNGFp0WOZaQbm8 QbBiznIKNMngwP8GAuX3kTGjsg2ORZ1R+d9ieW9Rc81S7kXHMmNaZpdnLIx55SpDo8Gu OJNA== X-Gm-Message-State: AOAM533tJVlzYZ2n6Q1ym2Td3nI8CweN34tigWS6qrsoFH6XytHLFjJy DCMOaLQ2Q99g36il2y3NMvY= X-Google-Smtp-Source: ABdhPJxI5A12WfjhIpKU1q8aHjBpHtVeCEkedOkazEWaDVAuM5xlWJaLTR9YwGgAHnZmikOHhX1Y/g== X-Received: by 2002:a4a:abcd:0:b0:35d:9b36:62f3 with SMTP id o13-20020a4aabcd000000b0035d9b3662f3mr2450026oon.14.1652978745137; Thu, 19 May 2022 09:45:45 -0700 (PDT) Received: from wintermute.localdomain (cpe-76-183-134-35.tx.res.rr.com. [76.183.134.35]) by smtp.gmail.com with ESMTPSA id i20-20020a9d6114000000b0060ae5f10973sm575601otj.15.2022.05.19.09.45.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 May 2022 09:45:44 -0700 (PDT) From: Chris Morgan To: linux-pm@vger.kernel.org Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, heiko@sntech.de, sre@kernel.org, jon.lin@rock-chips.com, zyw@rock-chips.com, zhangqing@rock-chips.com, Chris Morgan , Maya Matuszczyk , Krzysztof Kozlowski Subject: [PATCH 1/4 v7] dt-bindings: Add Rockchip rk817 battery charger support Date: Thu, 19 May 2022 11:45:30 -0500 Message-Id: <20220519164533.1961-2-macroalpha82@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220519164533.1961-1-macroalpha82@gmail.com> References: <20220519164533.1961-1-macroalpha82@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220519_094546_730169_BA7DE934 X-CRM114-Status: GOOD ( 13.73 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org From: Chris Morgan Create dt-binding documentation to document rk817 battery and charger usage. New device-tree properties have been added. - rockchip,resistor-sense-micro-ohms: The value in microohms of the sample resistor. - rockchip,sleep-enter-current-microamp: The value in microamps of the sleep enter current. - rockchip,sleep-filter-current: The value in microamps of the sleep filter current. Signed-off-by: Chris Morgan Signed-off-by: Maya Matuszczyk Reviewed-by: Krzysztof Kozlowski --- Note that this patch requires the following commit (still pending): https://lore.kernel.org/linux-rockchip/20220519161731.1168-1-macroalpha82@gmail.com/ .../bindings/mfd/rockchip,rk817.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml index bfc1720adc43..d0dccb1aaf4c 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -117,6 +117,47 @@ properties: description: Describes if the microphone uses differential mode. + charger: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + allOf: - if: properties: @@ -323,6 +364,13 @@ examples: }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; }; From patchwork Thu May 19 16:45:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Morgan X-Patchwork-Id: 12855788 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 547EBC433F5 for ; Thu, 19 May 2022 16:46:07 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=t12FTutfE1IsQ/FHYA0rqJfgeADOaE8rRVlzWTvXSB8=; b=hZJjDiaksoTkm5 bKZ9CJjDbb8F4iH4HwYhRDLkTe6yj7uPoF5RFKf1RSNBEotynygFA/bIRoG6tbHK0irKd8gjZFO78 nnIX92vrHnlVubNZql94jUKy6p9OxzlNtbMxmJWADY9UEPuY3C1ODpy/CAbILfeI6d55cW/ACN4T2 38iK6225XrkrKdQxJynlmRus78+P9ObdO3WPitlEsIPgrGywluVJjja5o1R9lnLfqqeEssTi3o6fs +5T4ymlCIaCIC/ZGZWJVhyU5SPdVDbdkpkNNeod6Nsn18w2gYWf7A1XXmY3LXLm51Uqju5/VPM29m uePj/npaPU13LlYmHJ1w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHg-008Sq2-3Z; Thu, 19 May 2022 16:45:56 +0000 Received: from mail-oi1-x235.google.com ([2607:f8b0:4864:20::235]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHZ-008Sm3-Jr for linux-rockchip@lists.infradead.org; Thu, 19 May 2022 16:45:52 +0000 Received: by mail-oi1-x235.google.com with SMTP id v66so7144322oib.3 for ; Thu, 19 May 2022 09:45:48 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=eGxcFia+56uzVoruJ6OmLxji9P6kTMXtUnj8BikXIyE=; b=SiBqje4XFvGbCaR1VN56TEs5SSUjgYZRvtwygKHZa7Ih4woZGlN/VJifZOLdTRyc8A 2U2fQZ0m0QryjoWw451d8xy9JXqamv51IG1Fw9JzbN1O6we0qk24anmQG1mOxxD/meh8 0k1DW5yNNr+4cdHl6B9QxK52emmfoXm7thRwo/BlpoVtryavx5rhTGCECDqjBCdwPGGN m+J+/mZmGl2c7Uk0lzBmbyewMxR/epyVFH4OLfOHu+qmZiIfrVjX6eARQt1lIzFfhemG /kgRc/7/yVti2odGN8VEidpa26sKhjsUEdEOkgFQmd7RrnUMaW+pIq3t8LTvZ+ZtWYUG fYGQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=eGxcFia+56uzVoruJ6OmLxji9P6kTMXtUnj8BikXIyE=; b=GIY7sffilg/k1eQcjhify4s2jfwefF/4gSYJvVQGgzWlgOhvcfX7xIOmn4pHeUS8xG wHy320fsm2M23tULFbyoNaZO5LuNsF/ddMcFnyMyxBBPRJDFUD6MVBWxrRGPYzoj4Tk5 x2IFAfQQuK0VN+51ztUX5Y4HT7yNkLw4wZRBtChb2SLWLLs3zzRzXOB7BJsUcNKF69Hc UhTUJWTR7KuouMXxOvj3TSfjJgahEaYyoX+YwtpFLuWfxUJ87zZh3xPWKzu7mpNwX8TL zZnfQikpJZH7H+gRQhTPfiffhymV6d+7HJ4qRsJzXbeHp6GcPfDFxU28fjvwmga0NKBc PzDA== X-Gm-Message-State: AOAM530gVyws+I8Es7OeBCoBIxcI64a4lSADANo09IgY4RblDx4Plb6t hUw40E2g5c6csehbcnB3i6jC/V+Hzuz3hg== X-Google-Smtp-Source: ABdhPJxr3gDiPSY+x2QUr+GitvS3iibqlO+FlQvCTeUCVZ1znp/Dif+OYJ1glM7ER+dRxVwkP6+Brw== X-Received: by 2002:a05:6808:23d2:b0:326:979a:46f3 with SMTP id bq18-20020a05680823d200b00326979a46f3mr3119448oib.207.1652978747965; Thu, 19 May 2022 09:45:47 -0700 (PDT) Received: from wintermute.localdomain (cpe-76-183-134-35.tx.res.rr.com. [76.183.134.35]) by smtp.gmail.com with ESMTPSA id i20-20020a9d6114000000b0060ae5f10973sm575601otj.15.2022.05.19.09.45.46 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 May 2022 09:45:47 -0700 (PDT) From: Chris Morgan To: linux-pm@vger.kernel.org Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, heiko@sntech.de, sre@kernel.org, jon.lin@rock-chips.com, zyw@rock-chips.com, zhangqing@rock-chips.com, Chris Morgan , Maya Matuszczyk Subject: [PATCH 2/4 v7] mfd: Add Rockchip rk817 battery charger support Date: Thu, 19 May 2022 11:45:31 -0500 Message-Id: <20220519164533.1961-3-macroalpha82@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220519164533.1961-1-macroalpha82@gmail.com> References: <20220519164533.1961-1-macroalpha82@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220519_094549_725978_1DA38E4B X-CRM114-Status: GOOD ( 12.60 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org From: Chris Morgan Add rk817 charger support cell to rk808 mfd driver. Acked-for-mfd-by: Lee Jones Signed-off-by: Chris Morgan Signed-off-by: Maya Matuszczyk --- drivers/mfd/rk808.c | 16 ++++++- include/linux/mfd/rk808.h | 91 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index 4142b638e5fa..283a65b64d2c 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -67,6 +67,10 @@ static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) case RK817_SECONDS_REG ... RK817_WEEKS_REG: case RK817_RTC_STATUS_REG: case RK817_CODEC_DTOP_LPT_SRST: + case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0: + case RK817_PMIC_CHRG_STS: + case RK817_PMIC_CHRG_OUT: + case RK817_PMIC_CHRG_IN: case RK817_INT_STS_REG0: case RK817_INT_STS_REG1: case RK817_INT_STS_REG2: @@ -74,7 +78,7 @@ static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) return true; } - return true; + return false; } static const struct regmap_config rk818_regmap_config = { @@ -127,6 +131,11 @@ static const struct resource rk817_pwrkey_resources[] = { DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL), }; +static const struct resource rk817_charger_resources[] = { + DEFINE_RES_IRQ(RK817_IRQ_PLUG_IN), + DEFINE_RES_IRQ(RK817_IRQ_PLUG_OUT), +}; + static const struct mfd_cell rk805s[] = { { .name = "rk808-clkout", }, { .name = "rk808-regulator", }, @@ -166,6 +175,11 @@ static const struct mfd_cell rk817s[] = { .resources = &rk817_rtc_resources[0], }, { .name = "rk817-codec",}, + { + .name = "rk817-charger", + .num_resources = ARRAY_SIZE(rk817_charger_resources), + .resources = &rk817_charger_resources[0], + }, }; static const struct mfd_cell rk818s[] = { diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index 58602032e642..9af1f3105f80 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -519,6 +519,77 @@ enum rk809_reg_id { #define MIC_DIFF_DIS (0x0 << 7) #define MIC_DIFF_EN (0x1 << 7) +/* RK817 Battery Registers */ +#define RK817_GAS_GAUGE_ADC_CONFIG0 0x50 +#define RK817_GG_EN (0x1 << 7) +#define RK817_SYS_VOL_ADC_EN (0x1 << 6) +#define RK817_TS_ADC_EN (0x1 << 5) +#define RK817_USB_VOL_ADC_EN (0x1 << 4) +#define RK817_BAT_VOL_ADC_EN (0x1 << 3) +#define RK817_BAT_CUR_ADC_EN (0x1 << 2) + +#define RK817_GAS_GAUGE_ADC_CONFIG1 0x55 + +#define RK817_VOL_CUR_CALIB_UPD BIT(7) + +#define RK817_GAS_GAUGE_GG_CON 0x56 +#define RK817_GAS_GAUGE_GG_STS 0x57 + +#define RK817_BAT_CON (0x1 << 4) +#define RK817_RELAX_VOL_UPD (0x3 << 2) +#define RK817_RELAX_STS (0x1 << 1) + +#define RK817_GAS_GAUGE_RELAX_THRE_H 0x58 +#define RK817_GAS_GAUGE_RELAX_THRE_L 0x59 +#define RK817_GAS_GAUGE_OCV_THRE_VOL 0x62 +#define RK817_GAS_GAUGE_OCV_VOL_H 0x63 +#define RK817_GAS_GAUGE_OCV_VOL_L 0x64 +#define RK817_GAS_GAUGE_PWRON_VOL_H 0x6b +#define RK817_GAS_GAUGE_PWRON_VOL_L 0x6c +#define RK817_GAS_GAUGE_PWRON_CUR_H 0x6d +#define RK817_GAS_GAUGE_PWRON_CUR_L 0x6e +#define RK817_GAS_GAUGE_OFF_CNT 0x6f +#define RK817_GAS_GAUGE_Q_INIT_H3 0x70 +#define RK817_GAS_GAUGE_Q_INIT_H2 0x71 +#define RK817_GAS_GAUGE_Q_INIT_L1 0x72 +#define RK817_GAS_GAUGE_Q_INIT_L0 0x73 +#define RK817_GAS_GAUGE_Q_PRES_H3 0x74 +#define RK817_GAS_GAUGE_Q_PRES_H2 0x75 +#define RK817_GAS_GAUGE_Q_PRES_L1 0x76 +#define RK817_GAS_GAUGE_Q_PRES_L0 0x77 +#define RK817_GAS_GAUGE_BAT_VOL_H 0x78 +#define RK817_GAS_GAUGE_BAT_VOL_L 0x79 +#define RK817_GAS_GAUGE_BAT_CUR_H 0x7a +#define RK817_GAS_GAUGE_BAT_CUR_L 0x7b +#define RK817_GAS_GAUGE_USB_VOL_H 0x7e +#define RK817_GAS_GAUGE_USB_VOL_L 0x7f +#define RK817_GAS_GAUGE_SYS_VOL_H 0x80 +#define RK817_GAS_GAUGE_SYS_VOL_L 0x81 +#define RK817_GAS_GAUGE_Q_MAX_H3 0x82 +#define RK817_GAS_GAUGE_Q_MAX_H2 0x83 +#define RK817_GAS_GAUGE_Q_MAX_L1 0x84 +#define RK817_GAS_GAUGE_Q_MAX_L0 0x85 +#define RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H 0x8f +#define RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_L 0x90 +#define RK817_GAS_GAUGE_CAL_OFFSET_H 0x91 +#define RK817_GAS_GAUGE_CAL_OFFSET_L 0x92 +#define RK817_GAS_GAUGE_VCALIB0_H 0x93 +#define RK817_GAS_GAUGE_VCALIB0_L 0x94 +#define RK817_GAS_GAUGE_VCALIB1_H 0x95 +#define RK817_GAS_GAUGE_VCALIB1_L 0x96 +#define RK817_GAS_GAUGE_IOFFSET_H 0x97 +#define RK817_GAS_GAUGE_IOFFSET_L 0x98 +#define RK817_GAS_GAUGE_BAT_R1 0x9a +#define RK817_GAS_GAUGE_BAT_R2 0x9b +#define RK817_GAS_GAUGE_BAT_R3 0x9c +#define RK817_GAS_GAUGE_DATA0 0x9d +#define RK817_GAS_GAUGE_DATA1 0x9e +#define RK817_GAS_GAUGE_DATA2 0x9f +#define RK817_GAS_GAUGE_DATA3 0xa0 +#define RK817_GAS_GAUGE_DATA4 0xa1 +#define RK817_GAS_GAUGE_DATA5 0xa2 +#define RK817_GAS_GAUGE_CUR_ADC_K0 0xb0 + #define RK817_POWER_EN_REG(i) (0xb1 + (i)) #define RK817_POWER_SLP_EN_REG(i) (0xb5 + (i)) @@ -544,10 +615,30 @@ enum rk809_reg_id { #define RK817_LDO_ON_VSEL_REG(idx) (0xcc + (idx) * 2) #define RK817_BOOST_OTG_CFG (0xde) +#define RK817_PMIC_CHRG_OUT 0xe4 +#define RK817_CHRG_VOL_SEL (0x07 << 4) +#define RK817_CHRG_CUR_SEL (0x07 << 0) + +#define RK817_PMIC_CHRG_IN 0xe5 +#define RK817_USB_VLIM_EN (0x01 << 7) +#define RK817_USB_VLIM_SEL (0x07 << 4) +#define RK817_USB_ILIM_EN (0x01 << 3) +#define RK817_USB_ILIM_SEL (0x07 << 0) +#define RK817_PMIC_CHRG_TERM 0xe6 +#define RK817_CHRG_TERM_ANA_DIG (0x01 << 2) +#define RK817_CHRG_TERM_ANA_SEL (0x03 << 0) +#define RK817_CHRG_EN (0x01 << 6) + +#define RK817_PMIC_CHRG_STS 0xeb +#define RK817_BAT_EXS BIT(7) +#define RK817_CHG_STS (0x07 << 4) + #define RK817_ID_MSB 0xed #define RK817_ID_LSB 0xee #define RK817_SYS_STS 0xf0 +#define RK817_PLUG_IN_STS (0x1 << 6) + #define RK817_SYS_CFG(i) (0xf1 + (i)) #define RK817_ON_SOURCE_REG 0xf5 From patchwork Thu May 19 16:45:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Morgan X-Patchwork-Id: 12855790 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 82BD0C433F5 for ; Thu, 19 May 2022 16:46:11 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=LNIiV75GhWSBgzG32f26gWtwCTLat22qiUtQe9Ov/qQ=; b=Wm2ShclOfxeP0E J7XqZFT/Gsq8jLO3TuBKU0Ztiy9aaB+zooJpibzrWtPcxdnER7tjosBNDTtWuDnbUr2TtU4VH45gM PcFU8ONLlazxblMchOCgu11Uw7gUYnGFbJlAUM4Zqz0OHPzBL6xFt3SVxCs19SJ1dmz4SmrQ41AiN wJ7reMYp5yQRcDn/XraK/p3ezk3yT6JG068ZAYKMMDQC8Rht1J49eDXuMWxAFtMj5tQ9RLnsWktwC Di1wso5LmwfeF8m6zMN3EZAD6m7oPBXF2YLjuOPTxlEo7PEgVtcqCt55v6qMw0ym3AJ8QHBvOSHs7 YTtkkLlrvTRoHDfG3ZTw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHk-008StY-Fj; Thu, 19 May 2022 16:46:00 +0000 Received: from mail-oi1-x22f.google.com ([2607:f8b0:4864:20::22f]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHc-008Snh-5I for linux-rockchip@lists.infradead.org; Thu, 19 May 2022 16:45:57 +0000 Received: by mail-oi1-x22f.google.com with SMTP id q8so7089056oif.13 for ; Thu, 19 May 2022 09:45:51 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=qfxcejjHeyex4VQvosRLrnPyCM/B5UjLJM1CrVybsho=; b=N5m+ayxcA4901ivxfgAjovUVlz3i20P/uxgDErtmFOmT8SrVK9ek4yCOTsNuxO/ei/ 5AHlUgZEmUG/L/xHAAHuWjV33H3HxvWXvuxb/OjT8lnVQcH2fbgpTI/GWg8PJoisspvd QhMqa2syfhs7RpddJWfYg6rhOjG1h8HV5CeeDU1cm3zQkxVM4Rtr2DCVkHqiYJC/HbwN 6wZz9n1fy9x+ABL3J4W5JD2YLbvWsMJptCEj06H6+DPFTwhQ95RYSeiqg9LqyxhFCnPr DgLUWb1bHN0YZj78gd9iMjBhxr2YfrXAbXTHvk+38DsWarchm7hM36KqApBSBMkolPTG gIeQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=qfxcejjHeyex4VQvosRLrnPyCM/B5UjLJM1CrVybsho=; b=OQkTjG+vz7mgOYB3t+u5URt5hRBmp9lnGFeIUOac9j8oyyd7A73+YHvduB8UrtCFfi ZuXGANLcKGTDL8EaQzL0qRfngFIGJI5/uCsLahiIzO6qur+k+pjt/boHNdzwkKJnzZQB Lp4nICuzvnEvKtn7EnTIy2oovQbW8rzc+SeZcdMZQx2UaK8lYv08w1Vr7p7q71p9d9L7 s+Dqh4Da9w4jpLpKOEP9895rq/iCfCxMwHrlt0quCuOK9RT9YkIj3NLsI12gCHJx9ElT YapfGIE4trcTeVn8lwjmnqFPmCN/9FnxFRFrYF39/fMcjuNTW0D2prkjFiznnxQ313/3 v8oA== X-Gm-Message-State: AOAM530bzcLUzfgRVjFE/7mqUYK8MnjZNqdJ+oES/n/ZIIZU+OITldfH BWaDtLXs5rIXDxEnGQT52xJghgAOeA/98A== X-Google-Smtp-Source: ABdhPJwltPFW9OeoIWps0Z2bDu1+u5oXjjnvC9Ni8Q4MRXVhRcJ63IgBzvbaB5F8VNEhgiMGFlGP8w== X-Received: by 2002:a05:6808:14d6:b0:32a:f0a7:140b with SMTP id f22-20020a05680814d600b0032af0a7140bmr1359607oiw.247.1652978750812; Thu, 19 May 2022 09:45:50 -0700 (PDT) Received: from wintermute.localdomain (cpe-76-183-134-35.tx.res.rr.com. [76.183.134.35]) by smtp.gmail.com with ESMTPSA id i20-20020a9d6114000000b0060ae5f10973sm575601otj.15.2022.05.19.09.45.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 May 2022 09:45:50 -0700 (PDT) From: Chris Morgan To: linux-pm@vger.kernel.org Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, heiko@sntech.de, sre@kernel.org, jon.lin@rock-chips.com, zyw@rock-chips.com, zhangqing@rock-chips.com, Chris Morgan , Maya Matuszczyk Subject: [PATCH 3/4 v7] power: supply: Add charger driver for Rockchip RK817 Date: Thu, 19 May 2022 11:45:32 -0500 Message-Id: <20220519164533.1961-4-macroalpha82@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220519164533.1961-1-macroalpha82@gmail.com> References: <20220519164533.1961-1-macroalpha82@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220519_094552_318955_9C689CC2 X-CRM114-Status: GOOD ( 33.17 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org From: Chris Morgan Add support for the Rockchip rk817 battery charger integrated into the rk817 PMIC. Signed-off-by: Chris Morgan Signed-off-by: Maya Matuszczyk --- drivers/power/supply/Kconfig | 6 + drivers/power/supply/Makefile | 1 + drivers/power/supply/rk817_charger.c | 1157 ++++++++++++++++++++++++++ 3 files changed, 1164 insertions(+) create mode 100644 drivers/power/supply/rk817_charger.c diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 1aa8323ad9f6..56e70a68679a 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -708,6 +708,12 @@ config CHARGER_BQ256XX charge management and system power path management devices for single cell Li-ion and Li-polymer batteries. +config CHARGER_RK817 + tristate "Rockchip RK817 PMIC Battery Charger" + depends on MFD_RK808 + help + Say Y to include support for Rockchip RK817 Battery Charger. + config CHARGER_SMB347 tristate "Summit Microelectronics SMB3XX Battery Charger" depends on I2C diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 7f02f36aea55..3040a1de81b8 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o obj-$(CONFIG_CHARGER_BQ25980) += bq25980_charger.o obj-$(CONFIG_CHARGER_BQ256XX) += bq256xx_charger.o +obj-$(CONFIG_CHARGER_RK817) += rk817_charger.o obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c new file mode 100644 index 000000000000..65a846b7f79e --- /dev/null +++ b/drivers/power/supply/rk817_charger.c @@ -0,0 +1,1157 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Charger Driver for Rockchip rk817 + * + * Copyright (c) 2021 + * + * Authors: Maya Matuszczyk + * Chris Morgan + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Charging statuses reported by hardware register */ +enum rk817_charge_status { + CHRG_OFF, + DEAD_CHRG, + TRICKLE_CHRG, + CC_OR_CV_CHRG, + CHARGE_FINISH, + USB_OVER_VOL, + BAT_TMP_ERR, + BAT_TIM_ERR, +}; + +/* Max charging current read to/written from hardware register. + * Note how highest value corresponding to 0x7 is the lowest + * current, this is per the datasheet. + */ +enum rk817_chg_cur { + CHG_1A, + CHG_1_5A, + CHG_2A, + CHG_2_5A, + CHG_2_75A, + CHG_3A, + CHG_3_5A, + CHG_0_5A, +}; + +struct rk817_charger { + struct device *dev; + struct rk808 *rk808; + + struct power_supply *bat_ps; + struct power_supply *chg_ps; + bool plugged_in; + bool battery_present; + + /* voltage_k and voltage_b values are used to calibrate the ADC + * voltage readings. While they are documented in the BSP kernel and + * datasheet as voltage_k and voltage_b, there is no further + * information explaining them in more detail. + */ + + uint32_t voltage_k; + uint32_t voltage_b; + + /* soc - state of charge - like the BSP this is stored as a percentage, + * to the thousandth. BSP has a display state of charge (dsoc) and a + * remaining state of charge (rsoc). This value will be used for both + * purposes here so we don't do any fancy math to try and "smooth" the + * charge and just report it as it is. Note for example an soc of 100 + * is stored as 100000, an soc of 50 is stored as 50000, etc. + */ + int soc; + + /* Capacity of battery when fully charged, equal or less than design + * capacity depending upon wear. BSP kernel saves to nvram in mAh, + * so this value is in mAh not the standard uAh. + */ + int fcc_mah; + + /* Calibrate the SOC on a fully charged battery, this way we can use + * the calibrated SOC value to correct for columb counter drift. + */ + bool soc_cal; + + /* Implementation specific immutable properties from device tree */ + int res_div; + int sleep_enter_current_ua; + int sleep_filter_current_ua; + int bat_charge_full_design_uah; + int bat_voltage_min_design_uv; + int bat_voltage_max_design_uv; + + /* Values updated periodically by driver for display. */ + int charge_now_uah; + int volt_avg_uv; + int cur_avg_ua; + int max_chg_cur_ua; + int max_chg_volt_uv; + int charge_status; + int charger_input_volt_avg_uv; + + /* Work queue to periodically update values. */ + struct delayed_work work; +}; + +/* ADC coefficients extracted from BSP kernel */ +#define ADC_TO_CURRENT(adc_value, res_div) \ + (adc_value * 172 / res_div) + +#define CURRENT_TO_ADC(current, samp_res) \ + (current * samp_res / 172) + +#define CHARGE_TO_ADC(capacity, res_div) \ + (capacity * res_div * 3600 / 172 * 1000) + +#define ADC_TO_CHARGE_UAH(adc_value, res_div) \ + (adc_value / 3600 * 172 / res_div) + +static u8 rk817_chg_cur_to_reg(u32 chg_cur_ma) +{ + if (chg_cur_ma >= 3500) + return CHG_3_5A; + else if (chg_cur_ma >= 3000) + return CHG_3A; + else if (chg_cur_ma >= 2750) + return CHG_2_75A; + else if (chg_cur_ma >= 2500) + return CHG_2_5A; + else if (chg_cur_ma >= 2000) + return CHG_2A; + else if (chg_cur_ma >= 1500) + return CHG_1_5A; + else if (chg_cur_ma >= 1000) + return CHG_1A; + else if (chg_cur_ma >= 500) + return CHG_0_5A; + else + return -EINVAL; +} + +static int rk817_chg_cur_from_reg(u8 reg) +{ + switch (reg) { + case CHG_0_5A: + return 500000; + case CHG_1A: + return 1000000; + case CHG_1_5A: + return 1500000; + case CHG_2A: + return 2000000; + case CHG_2_5A: + return 2500000; + case CHG_2_75A: + return 2750000; + case CHG_3A: + return 3000000; + case CHG_3_5A: + return 3500000; + default: + return -EINVAL; + } +} + +static void rk817_bat_calib_vol(struct rk817_charger *charger) +{ + uint32_t vcalib0 = 0; + uint32_t vcalib1 = 0; + u8 bulk_reg[2]; + + /* calibrate voltage */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB0_H, + bulk_reg, 2); + vcalib0 = get_unaligned_be16(bulk_reg); + + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB1_H, + bulk_reg, 2); + vcalib1 = get_unaligned_be16(bulk_reg); + + /* values were taken from BSP kernel */ + charger->voltage_k = (4025 - 2300) * 1000 / + ((vcalib1 - vcalib0) ? (vcalib1 - vcalib0) : 1); + charger->voltage_b = 4025 - (charger->voltage_k * vcalib1) / 1000; +} + +static void rk817_bat_calib_cur(struct rk817_charger *charger) +{ + u8 bulk_reg[2]; + + /* calibrate current */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_IOFFSET_H, + bulk_reg, 2); + regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_CAL_OFFSET_H, + bulk_reg, 2); +} + +/* note that only the fcc_mah is really used by this driver, the other values + * are to ensure we can remain backwards compatible with the BSP kernel. + */ +static int rk817_record_battery_nvram_values(struct rk817_charger *charger) +{ + u8 bulk_reg[3]; + int ret; + + /* write the soc value to the nvram location used by the BSP kernel + * for the dsoc value. + */ + put_unaligned_le24(charger->soc, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_R1, + bulk_reg, 3); + if (ret < 0) + return ret; + /* write the same value to the nvram location used by the BSP kernel + * for the rsoc value. + */ + put_unaligned_le24(charger->soc, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA0, + bulk_reg, 3); + if (ret < 0) + return ret; + /* write the fcc_mah in mAh, just as the BSP kernel does. */ + put_unaligned_le24(charger->fcc_mah, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA3, + bulk_reg, 3); + if (ret < 0) + return ret; + + return 0; +} + +static int rk817_bat_calib_cap(struct rk817_charger *charger) +{ + struct rk808 *rk808 = charger->rk808; + int tmp, charge_now, charge_now_adc, volt_avg; + u8 bulk_reg[4]; + + /* Calibrate the soc and fcc on a fully charged battery */ + + if (charger->charge_status == CHARGE_FINISH && (!charger->soc_cal)) { + /* soc should be 100000 and columb counter should show the full + * charge capacity. Note that if the device is unplugged for a + * period of several days the columb counter will have a large + * margin of error, so setting it back to the full charge on + * a completed charge cycle should correct this (my device was + * showing 33% battery after 3 days unplugged when it should + * have been closer to 95% based on voltage and charge + * current). + */ + + charger->soc = 100000; + charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah, + charger->res_div); + put_unaligned_be32(charge_now_adc, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + + charger->soc_cal = 1; + dev_dbg(charger->dev, + "Fully charged. SOC is %d, full capacity is %d\n", + charger->soc, charger->fcc_mah * 1000); + } + + /* The columb counter can drift up slightly, so we should correct for + * it. But don't correct it until we're at 100% soc. + */ + if (charger->charge_status == CHARGE_FINISH && charger->soc_cal) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + charge_now_adc = get_unaligned_be32(bulk_reg); + if (charge_now_adc < 0) + return charge_now_adc; + charge_now = ADC_TO_CHARGE_UAH(charge_now_adc, + charger->res_div); + + /* Re-init columb counter with updated values to correct drift. + */ + if (charge_now / 1000 > charger->fcc_mah) { + dev_dbg(charger->dev, + "Recalibrating columb counter to %d uah\n", + charge_now); + /* Order of operations matters here to ensure we keep + * enough precision until the last step to keep from + * making needless updates to columb counter. + */ + charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah, + charger->res_div); + put_unaligned_be32(charge_now_adc, bulk_reg); + regmap_bulk_write(rk808->regmap, + RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + } + } + + /* Calibrate the fully charged capacity when we previously had a full + * battery (soc_cal = 1) and are now empty (at or below minimum design + * voltage). If our columb counter is still positive, subtract that + * from our fcc value to get a calibrated fcc, and if our columb + * counter is negative add that to our fcc (but not to exceed our + * design capacity). + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + volt_avg = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + if (volt_avg <= charger->bat_voltage_min_design_uv && + charger->soc_cal) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + charge_now_adc = get_unaligned_be32(bulk_reg); + charge_now = ADC_TO_CHARGE_UAH(charge_now_adc, + charger->res_div); + /* Note, if charge_now is negative this will add it (what we + * want) and if it's positive this will subtract (also what + * we want). + */ + charger->fcc_mah = charger->fcc_mah - (charge_now / 1000); + + dev_dbg(charger->dev, + "Recalibrating full charge capacity to %d uah\n", + charger->fcc_mah * 1000); + } + + rk817_record_battery_nvram_values(charger); + + return 0; +} + +static void rk817_read_props(struct rk817_charger *charger) +{ + int tmp, reg; + u8 bulk_reg[4]; + + /* Recalibrate voltage and current readings if we need to BSP does both + * on CUR_CALIB_UPD, ignoring VOL_CALIB_UPD. Curiously enough, both + * documentation and the BSP show that you perform an update if bit 7 + * is 1, but you clear the status by writing a 1 to bit 7. + */ + regmap_read(charger->rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG1, ®); + if (reg & RK817_VOL_CUR_CALIB_UPD) { + rk817_bat_calib_cur(charger); + rk817_bat_calib_vol(charger); + regmap_write_bits(charger->rk808->regmap, + RK817_GAS_GAUGE_ADC_CONFIG1, + RK817_VOL_CUR_CALIB_UPD, + RK817_VOL_CUR_CALIB_UPD); + } + + /* Update reported charge. */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + charger->charge_now_uah = ADC_TO_CHARGE_UAH(tmp, charger->res_div); + if (charger->charge_now_uah < 0) + charger->charge_now_uah = 0; + if (charger->charge_now_uah > charger->fcc_mah * 1000) + charger->charge_now_uah = charger->fcc_mah * 1000; + + /* Update soc based on reported charge. */ + charger->soc = charger->charge_now_uah * 100 / charger->fcc_mah; + + /* Update reported voltage. */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + charger->volt_avg_uv = (charger->voltage_k * tmp) + 1000 * + charger->voltage_b; + + /* Update reported current. Note value from registers is a signed 16 + * bit int. + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_CUR_H, + bulk_reg, 2); + tmp = (short int)get_unaligned_be16(bulk_reg); + charger->cur_avg_ua = ADC_TO_CURRENT(tmp, charger->res_div); + + /* Update the max charge current. This value shouldn't change, but we + * can read it to report what the PMIC says it is instead of simply + * returning the default value. + */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, ®); + charger->max_chg_cur_ua = + rk817_chg_cur_from_reg(reg & RK817_CHRG_CUR_SEL); + + /* Update max charge voltage. Like the max charge current this value + * shouldn't change, but we can report what the PMIC says. + */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, ®); + charger->max_chg_volt_uv = ((((reg & RK817_CHRG_VOL_SEL) >> 4) * + 50000) + 4100000); + + /* Check if battery still present. */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, ®); + charger->battery_present = (reg & RK817_BAT_EXS); + + /* Get which type of charge we are using (if any). */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, ®); + charger->charge_status = (reg >> 4) & 0x07; + + /* Get charger input voltage. Note that on my example hardware (an + * Odroid Go Advance) the voltage of the power connector is measured + * on the register labelled USB in the datasheet; I don't know if this + * is how it is designed or just a quirk of the implementation. I + * believe this will also measure the voltage of the USB output when in + * OTG mode, if that is the case we may need to change this in the + * future to return 0 if the power supply status is offline (I can't + * test this with my current implementation. Also, when the voltage + * should be zero sometimes the ADC still shows a single bit (which + * would register as 20000uv). When this happens set it to 0. + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_USB_VOL_H, + bulk_reg, 2); + reg = get_unaligned_be16(bulk_reg); + if (reg > 1) { + tmp = ((charger->voltage_k * reg / 1000 + charger->voltage_b) * + 60 / 46); + charger->charger_input_volt_avg_uv = tmp * 1000; + } else { + charger->charger_input_volt_avg_uv = 0; + } + + /* Calibrate battery capacity and soc. */ + rk817_bat_calib_cap(charger); +} + +static int rk817_bat_get_prop(struct power_supply *ps, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct rk817_charger *charger = power_supply_get_drvdata(ps); + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = charger->battery_present; + break; + case POWER_SUPPLY_PROP_STATUS: + if (charger->cur_avg_ua < 0) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + switch (charger->charge_status) { + case CHRG_OFF: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + /* Dead charge is documented, but not explained. I never + * observed it but assume it's a pre-charge for a dead + * battery. + */ + case DEAD_CHRG: + case TRICKLE_CHRG: + case CC_OR_CV_CHRG: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + case CHARGE_FINISH: + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + default: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + return -EINVAL; + + } + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + switch (charger->charge_status) { + case CHRG_OFF: + case CHARGE_FINISH: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + case TRICKLE_CHRG: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case DEAD_CHRG: + case CC_OR_CV_CHRG: + val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + break; + } + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = charger->fcc_mah * 1000; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = charger->bat_charge_full_design_uah; + break; + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: + val->intval = 0; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = charger->charge_now_uah; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = charger->bat_voltage_min_design_uv; + break; + case POWER_SUPPLY_PROP_CAPACITY: + /* Add 500 so that values like 99999 are 100% not 99%. */ + val->intval = (charger->soc + 500) / 1000; + if (val->intval > 100) + val->intval = 100; + if (val->intval < 0) + val->intval = 0; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = charger->volt_avg_uv; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + val->intval = charger->cur_avg_ua; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = charger->max_chg_cur_ua; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + val->intval = charger->max_chg_volt_uv; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = charger->bat_voltage_max_design_uv; + break; + default: + return -EINVAL; + } + return 0; +} + +static int rk817_chg_get_prop(struct power_supply *ps, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct rk817_charger *charger = power_supply_get_drvdata(ps); + + switch (prop) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = charger->plugged_in; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + /* max voltage from datasheet at 5.5v (default 5.0v) */ + val->intval = 5500000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + /* min voltage from datasheet at 3.8v (default 5.0v) */ + val->intval = 3800000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = charger->charger_input_volt_avg_uv; + break; + /* While it's possible that other implementations could use different + * USB types, the current implementation for this PMIC (the Odroid Go + * Advance) only uses a dedicated charging port with no rx/tx lines. + */ + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = POWER_SUPPLY_USB_TYPE_DCP; + break; + default: + return -EINVAL; + } + return 0; + +} + +static irqreturn_t rk817_plug_in_isr(int irq, void *cg) +{ + struct rk817_charger *charger; + + charger = (struct rk817_charger *)cg; + charger->plugged_in = 1; + power_supply_changed(charger->chg_ps); + power_supply_changed(charger->bat_ps); + /* try to recalibrate capacity if we hit full charge. */ + charger->soc_cal = 0; + + rk817_read_props(charger); + + dev_dbg(charger->dev, "Power Cord Inserted\n"); + + return IRQ_HANDLED; +} + +static irqreturn_t rk817_plug_out_isr(int irq, void *cg) +{ + struct rk817_charger *charger; + struct rk808 *rk808; + + charger = (struct rk817_charger *)cg; + rk808 = charger->rk808; + charger->plugged_in = 0; + power_supply_changed(charger->bat_ps); + power_supply_changed(charger->chg_ps); + + /* For some reason the bits of RK817_PMIC_CHRG_IN reset whenever the + * power cord is unplugged. This was not documented in the BSP kernel + * or the datasheet and only discovered by trial and error. Set minimum + * USB input voltage to 4.5v and enable USB voltage input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_VLIM_SEL, (0x05 << 4)); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN, + (0x01 << 7)); + + /* Set average USB input current limit to 1.5A and enable USB current + * input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_ILIM_SEL, 0x03); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN, + (0x01 << 3)); + + rk817_read_props(charger); + + dev_dbg(charger->dev, "Power Cord Removed\n"); + + return IRQ_HANDLED; +} + +static enum power_supply_property rk817_bat_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, +}; + +static enum power_supply_property rk817_chg_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_AVG, +}; + +static enum power_supply_usb_type rk817_usb_type[] = { + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_UNKNOWN, +}; + +static const struct power_supply_desc rk817_bat_desc = { + .name = "rk817-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = rk817_bat_props, + .num_properties = ARRAY_SIZE(rk817_bat_props), + .get_property = rk817_bat_get_prop, +}; + +static const struct power_supply_desc rk817_chg_desc = { + .name = "rk817-charger", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = rk817_usb_type, + .num_usb_types = ARRAY_SIZE(rk817_usb_type), + .properties = rk817_chg_props, + .num_properties = ARRAY_SIZE(rk817_chg_props), + .get_property = rk817_chg_get_prop, +}; + +static int rk817_read_battery_nvram_values(struct rk817_charger *charger) +{ + u8 bulk_reg[3]; + int ret; + + /* Read the nvram data for full charge capacity. */ + ret = regmap_bulk_read(charger->rk808->regmap, + RK817_GAS_GAUGE_DATA3, bulk_reg, 3); + if (ret < 0) + return ret; + charger->fcc_mah = get_unaligned_le24(bulk_reg); + + /* Sanity checking for values equal to zero or less than would be + * practical for this device (BSP Kernel assumes 500mAH or less) for + * practicality purposes. + */ + if (charger->fcc_mah < 500) { + dev_info(charger->dev, + "Invalid NVRAM max charge, setting to %u uAH\n", + charger->bat_charge_full_design_uah); + charger->fcc_mah = charger->bat_charge_full_design_uah / 1000; + } + + /* Read the nvram for state of charge. */ + ret = regmap_bulk_read(charger->rk808->regmap, + RK817_GAS_GAUGE_BAT_R1, bulk_reg, 3); + if (ret < 0) + return ret; + charger->soc = get_unaligned_le24(bulk_reg); + + return 0; +} + +static int +rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger, + struct power_supply_battery_info *bat_info) +{ + struct rk808 *rk808 = charger->rk808; + u8 bulk_reg[4]; + u32 boot_voltage, boot_charge_mah, tmp; + int ret, reg, off_time; + int soc_tmp1, soc_tmp2, soc_tmp3; + bool first_boot; + + /* Check if the battery is uninitalized. If it is, the columb counter + * needs to be set up. + */ + ret = regmap_read(rk808->regmap, RK817_GAS_GAUGE_GG_STS, ®); + if (ret < 0) + return ret; + first_boot = reg & RK817_BAT_CON; + /* If the battery is uninitialized, use the poweron voltage and an ocv + * lookup to guess our charge. The number won't be very accurate until + * we hit either our minimum voltage (0%) or full charge (100%). + */ + if (first_boot) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + + 1000 * charger->voltage_b; + /* Since only implementation has no working thermistor, assume + * 20C for OCV lookup. If lookup fails, report error with OCV + * table. + */ + charger->soc = power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, + 20) * 1000; + if (charger->soc < 0) + charger->soc = 0; + + /* Guess that full charge capacity is the design capacity */ + charger->fcc_mah = charger->bat_charge_full_design_uah / 1000; + /* Set battery as "set up". BSP driver uses this value even + * though datasheet claims it's a read-only value. + */ + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS, + RK817_BAT_CON, 0); + /* Save nvram values */ + ret = rk817_record_battery_nvram_values(charger); + if (ret < 0) + return ret; + } else { + ret = rk817_read_battery_nvram_values(charger); + if (ret < 0) + return ret; + + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + if (tmp < 0) + tmp = 0; + boot_charge_mah = ADC_TO_CHARGE_UAH(tmp, + charger->res_div) / 1000; + /* Check if the columb counter has been off for more than 300 + * minutes as it tends to drift downward. If so, re-init soc + * with the boot voltage instead. Note the unit values for the + * OFF_CNT register appear to be in decaminutes and stops + * counting at 2550 (0xFF) minutes. BSP kernel used OCV, but + * for me occasionally that would show invalid values. Boot + * voltage is only accurate for me on first poweron (not + * reboots), but we shouldn't ever encounter an OFF_CNT more + * than 0 on a reboot anyway. + */ + regmap_read(rk808->regmap, RK817_GAS_GAUGE_OFF_CNT, &off_time); + if (off_time >= 30) { + regmap_bulk_read(rk808->regmap, + RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + + 1000 * charger->voltage_b; + charger->soc = + power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, + 20) * 1000; + } else { + charger->soc = (boot_charge_mah * 1000 * 100 / + charger->fcc_mah); + } + } + + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + soc_tmp1 = power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, 20) * 1000; + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + if (tmp < 0) + tmp = 0; + boot_charge_mah = ADC_TO_CHARGE_UAH(tmp, charger->res_div) / 1000; + soc_tmp2 = (boot_charge_mah * 1000 * 100 / charger->fcc_mah); + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_OCV_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + soc_tmp3 = power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, 20) * 1000; + + /* Now we have our full charge capacity and soc, init the columb + * counter. + */ + boot_charge_mah = charger->soc * charger->fcc_mah / 100 / 1000; + if (boot_charge_mah > charger->fcc_mah) + boot_charge_mah = charger->fcc_mah; + tmp = CHARGE_TO_ADC(boot_charge_mah, charger->res_div); + put_unaligned_be32(tmp, bulk_reg); + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + if (ret < 0) + return ret; + + /* Set QMAX value to max design capacity. */ + tmp = CHARGE_TO_ADC((charger->bat_charge_full_design_uah / 1000), + charger->res_div); + put_unaligned_be32(tmp, bulk_reg); + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_MAX_H3, + bulk_reg, 4); + if (ret < 0) + return ret; + + return 0; +} + +static int rk817_battery_init(struct rk817_charger *charger, + struct power_supply_battery_info *bat_info) +{ + struct rk808 *rk808 = charger->rk808; + u32 tmp, max_chg_vol_mv, max_chg_cur_ma; + u8 max_chg_vol_reg, chg_term_i_reg, max_chg_cur_reg; + int ret, chg_term_ma; + u8 bulk_reg[2]; + + /* Get initial plug state */ + regmap_read(rk808->regmap, RK817_SYS_STS, &tmp); + charger->plugged_in = (tmp & RK817_PLUG_IN_STS); + + /* Turn on all ADC functions to measure battery, USB, and sys voltage, + * as well as batt temp. Note only tested implementation so far does + * not use a battery with a thermistor. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG0, 0xfc); + + /* Set relax mode voltage sampling interval and ADC offset calibration + * interval to 8 minutes to mirror BSP kernel. Set voltage and current + * modes to average to mirror BSP kernel. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_GG_CON, 0x04); + + /* Calibrate voltage like the BSP does here. */ + rk817_bat_calib_vol(charger); + + /* Write relax threshold, derived from sleep enter current. */ + tmp = CURRENT_TO_ADC(charger->sleep_enter_current_ua, + charger->res_div); + put_unaligned_be16(tmp, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_RELAX_THRE_H, + bulk_reg, 2); + + /* Write sleep sample current, derived from sleep filter current. */ + tmp = CURRENT_TO_ADC(charger->sleep_filter_current_ua, + charger->res_div); + put_unaligned_be16(tmp, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H, + bulk_reg, 2); + + /* Restart battery relax voltage */ + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS, + RK817_RELAX_VOL_UPD, (0x0 << 2)); + + /* Set OCV Threshold Voltage to 127.5mV. This was hard coded like this + * in the BSP. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_OCV_THRE_VOL, 0xff); + + /* Set maximum charging voltage to battery max voltage. Trying to be + * incredibly safe with these value, as setting them wrong could + * overcharge the battery, which would be very bad. + */ + max_chg_vol_mv = bat_info->constant_charge_voltage_max_uv / 1000; + max_chg_cur_ma = bat_info->constant_charge_current_max_ua / 1000; + + if (max_chg_vol_mv < 4100) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger voltage, value %u unsupported\n", + max_chg_vol_mv * 1000); + } + if (max_chg_vol_mv > 4450) { + dev_info(charger->dev, + "Setting max charge voltage to 4450000uv\n"); + max_chg_vol_mv = 4450; + } + + if (max_chg_cur_ma < 500) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger current, value %u unsupported\n", + max_chg_cur_ma * 1000); + } + if (max_chg_cur_ma > 3500) + dev_info(charger->dev, + "Setting max charge current to 3500000ua\n"); + + /* Now that the values are sanity checked, if we subtract 4100 from the + * max voltage and divide by 50, we conviently get the exact value for + * the registers, which are 4.1v, 4.15v, 4.2v, 4.25v, 4.3v, 4.35v, + * 4.4v, and 4.45v; these correspond to values 0x00 through 0x07. + */ + max_chg_vol_reg = (max_chg_vol_mv - 4100) / 50; + + max_chg_cur_reg = rk817_chg_cur_to_reg(max_chg_cur_ma); + + if (max_chg_vol_reg < 0 || max_chg_vol_reg > 7) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger voltage, value %u unsupported\n", + max_chg_vol_mv * 1000); + } + if (max_chg_cur_reg < 0 || max_chg_cur_reg > 7) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger current, value %u unsupported\n", + max_chg_cur_ma * 1000); + } + + /* Write the values to the registers, and deliver an emergency warning + * in the event they are not written correctly. + */ + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT, + RK817_CHRG_VOL_SEL, (max_chg_vol_reg << 4)); + if (ret) { + dev_emerg(charger->dev, + "Danger, unable to set max charger voltage: %u\n", + ret); + } + + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT, + RK817_CHRG_CUR_SEL, max_chg_cur_reg); + if (ret) { + dev_emerg(charger->dev, + "Danger, unable to set max charger current: %u\n", + ret); + } + + /* Set charge finishing mode to analog */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM, + RK817_CHRG_TERM_ANA_DIG, (0x0 << 2)); + + /* Set charge finish current, warn if value not in range and keep + * default. + */ + chg_term_ma = bat_info->charge_term_current_ua / 1000; + if (chg_term_ma < 150 || chg_term_ma > 400) { + dev_warn(charger->dev, + "Invalid charge termination %u, keeping default\n", + chg_term_ma * 1000); + chg_term_ma = 200; + } + + /* Values of 150ma, 200ma, 300ma, and 400ma correspond to 00, 01, 10, + * and 11. + */ + chg_term_i_reg = (chg_term_ma - 100) / 100; + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM, + RK817_CHRG_TERM_ANA_SEL, chg_term_i_reg); + + ret = rk817_read_or_set_full_charge_on_boot(charger, bat_info); + if (ret < 0) + return ret; + + /* Set minimum USB input voltage to 4.5v and enable USB voltage input + * limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_VLIM_SEL, (0x05 << 4)); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN, + (0x01 << 7)); + + /* Set average USB input current limit to 1.5A and enable USB current + * input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_ILIM_SEL, 0x03); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN, + (0x01 << 3)); + + return 0; +} + +static void rk817_charging_monitor(struct work_struct *work) +{ + struct rk817_charger *charger; + + charger = container_of(work, struct rk817_charger, work.work); + + rk817_read_props(charger); + + /* Run every 8 seconds like the BSP driver did. */ + schedule_delayed_work(&charger->work, msecs_to_jiffies(8000)); +} + +static int rk817_charger_probe(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct rk817_charger *charger; + struct device_node *node; + struct power_supply_battery_info *bat_info; + struct device *dev = &pdev->dev; + struct power_supply_config pscfg = {}; + int plugin_irq, plugout_irq; + int of_value; + int ret; + + node = of_get_child_by_name(dev->parent->of_node, "charger"); + if (!node) + return -ENODEV; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->rk808 = rk808; + + charger->dev = &pdev->dev; + platform_set_drvdata(pdev, charger); + + rk817_bat_calib_vol(charger); + + pscfg.drv_data = charger; + pscfg.of_node = node; + + /* Get sample resistor value. Note only values of 10000 or 20000 + * microohms are allowed. Schematic for my test implementation (an + * Odroid Go Advance) shows a 10 milliohm resistor for reference. + */ + ret = of_property_read_u32(node, "rockchip,resistor-sense-micro-ohms", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sample resistor value\n"); + } + /* Store as a 1 or a 2, since all we really use the value for is as a + * divisor in some calculations. + */ + charger->res_div = (of_value == 20000) ? 2 : 1; + + /* Get sleep enter current value. Not sure what this value is for + * other than to help calibrate the relax threshold. + */ + ret = of_property_read_u32(node, + "rockchip,sleep-enter-current-microamp", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sleep enter cur value\n"); + } + charger->sleep_enter_current_ua = of_value; + + /* Get sleep filter current value */ + ret = of_property_read_u32(node, + "rockchip,sleep-filter-current-microamp", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sleep filter cur value\n"); + } + + charger->sleep_filter_current_ua = of_value; + + charger->bat_ps = devm_power_supply_register(&pdev->dev, + &rk817_bat_desc, &pscfg); + + charger->chg_ps = devm_power_supply_register(&pdev->dev, + &rk817_chg_desc, &pscfg); + + if (IS_ERR(charger->chg_ps)) + return dev_err_probe(dev, -EINVAL, + "Battery failed to probe\n"); + + if (IS_ERR(charger->chg_ps)) + return dev_err_probe(dev, -EINVAL, + "Charger failed to probe\n"); + + ret = power_supply_get_battery_info(charger->bat_ps, + &bat_info); + if (ret) { + return dev_err_probe(dev, ret, + "Unable to get battery info: %d\n", ret); + } + + if ((!bat_info->charge_full_design_uah) || + (!bat_info->voltage_min_design_uv) || + (!bat_info->voltage_max_design_uv) || + (!bat_info->constant_charge_voltage_max_uv) || + (!bat_info->constant_charge_current_max_ua) || + (!bat_info->charge_term_current_ua)) { + return dev_err_probe(dev, -EINVAL, + "Required battery info missing.\n"); + } + + charger->bat_charge_full_design_uah = bat_info->charge_full_design_uah; + charger->bat_voltage_min_design_uv = bat_info->voltage_min_design_uv; + charger->bat_voltage_max_design_uv = bat_info->voltage_max_design_uv; + + /* Has to run after power_supply_get_battery_info as it depends on some + * values discovered from that routine. + */ + ret = rk817_battery_init(charger, bat_info); + if (ret) + return ret; + + power_supply_put_battery_info(charger->bat_ps, bat_info); + + plugin_irq = platform_get_irq(pdev, 0); + if (plugin_irq < 0) + return plugin_irq; + + plugout_irq = platform_get_irq(pdev, 1); + if (plugout_irq < 0) + return plugout_irq; + + ret = devm_request_threaded_irq(charger->dev, plugin_irq, NULL, + rk817_plug_in_isr, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "rk817_plug_in", charger); + if (ret) { + return dev_err_probe(&pdev->dev, ret, + "plug_in_irq request failed!\n"); + } + + ret = devm_request_threaded_irq(charger->dev, plugout_irq, NULL, + rk817_plug_out_isr, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "rk817_plug_out", charger); + if (ret) { + return dev_err_probe(&pdev->dev, ret, + "plug_out_irq request failed!\n"); + } + + INIT_DELAYED_WORK(&charger->work, rk817_charging_monitor); + /* Get and populate the first set of values. */ + schedule_delayed_work(&charger->work, 0); + + return 0; +} + + +static struct platform_driver rk817_charger_driver = { + .probe = rk817_charger_probe, + .driver = { + .name = "rk817-charger", + }, +}; +module_platform_driver(rk817_charger_driver); + +MODULE_DESCRIPTION("Battery power supply driver for RK817 PMIC"); +MODULE_AUTHOR("Maya Matuszczyk "); +MODULE_LICENSE("GPL"); From patchwork Thu May 19 16:45:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Morgan X-Patchwork-Id: 12855789 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3D876C433EF for ; Thu, 19 May 2022 16:46:10 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=3+13Ljd3hvhmpyTw4WI7Q4eEAUq5zCgcZWDPP138lB0=; b=bc/IyqoUG5xxjW QYbTiVPmMw0UqFHhDZ41XEXDIi5+ZIaJIAwhdrPIyFYKxdO33vyMCvEbUI7tuEGBMVQMsxeFGK34i RJD+43CdGU0IfrWbRlXD1Mjw0V6TEn6G/YksJeb8wPr5oCqEboA1W7VI33oNzaMjdk97EA491tY1P 8JJzHRdsg1VMBPWs7ZJbt13ImUTiGFb2K/apXVXouVAaVKP0LLCv5xWyUvAmjyB3AHDpOEUuwp2QE mitqPErkyRAkpKKBjKc+OIYdb+Mk52EhgECXvPDHe3sPQb/qyTeevKUk1UcU5vG3boay84yTdiyzA ZAEpKhdcg9eRkvzwjdyg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHi-008SsS-Je; Thu, 19 May 2022 16:45:58 +0000 Received: from mail-oi1-x235.google.com ([2607:f8b0:4864:20::235]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrjHd-008Sm3-Q4 for linux-rockchip@lists.infradead.org; Thu, 19 May 2022 16:45:55 +0000 Received: by mail-oi1-x235.google.com with SMTP id v66so7144322oib.3 for ; Thu, 19 May 2022 09:45:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=vAncHnLBpOlRUc0OOfu8cfX5QtgUJCxxL9tQZFajpgg=; b=hJy6IxH21tG0Q2UVRI6I0zpPJBekBS3BT51UmhrFdjVWmuOIh75PYs12fFPvf5Hhmk OHERQ4aC7BLYotIVpL1fykIFL7ZSwuRMuxXJ2hCCbT7igx+rb2hdWtayaJ1RFfqL7Kif AU6C0gQagpcxlkaUvO9yZvBRam5QI+98UHdIIfgLmC7jqslf2Wsxc9wqMPMEELoGcJAs Qr38w+dazgnW0y/pYniDTTKMDktRVOMGy7Ufv//p3gRBz0BhUPQ3mB939KaCS3xcElZs P231f4tlbL60zVDOuMDS0PuK1xDKGNP+8T3ldEsmu9HEvUqDsiVV5g7G0V0j1VMiSKmr jtTw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=vAncHnLBpOlRUc0OOfu8cfX5QtgUJCxxL9tQZFajpgg=; b=KHQ68ufy72E/Tz6tw0Cm22Jx/OYnaro27EkHR81ngoQ9Qu/0kfCAEp0c90a2RJ66J7 j0GjpPPkwiE9uwvADmwm/w5gfWnodWF3/dI2zhrIlVM2gp6X5DeI2WbDqvUn8uQqmb4i SzJBKABX5tKHZwWoLW5/Mg7+FMpxTzcpqLqcl5qe1/yHoWB6eAGyTRSiVuR5jMfFSZNg gNZCDTOEwihADpZa7HmwCXWigsCQiKWbqjbTqkIuYc5DCrJpDpxCTTcYppBFzLNyKl+M tXN3xA50uIyeImjB8L3ZvpNpYV7F3pTqEo7AELQRBXibekjopYh6uBen9mgH13M/gOBy Zf9g== X-Gm-Message-State: AOAM533ZRtJTH/7M0lP4snSouZsaHaqa3hm0O3mlhpwO7SkcFTVyUmVB MDBVfG5LsACyCIWSQE9NrPyEWmKE7roIOg== X-Google-Smtp-Source: ABdhPJz551tN9FM+mkMdW4A/XUbEeb/DtY+Y/vclXl9Gt1dtCrgtIQkaivvVQHph2qP/N47jz4ikPg== X-Received: by 2002:aca:5889:0:b0:32a:f591:8731 with SMTP id m131-20020aca5889000000b0032af5918731mr828910oib.270.1652978753548; Thu, 19 May 2022 09:45:53 -0700 (PDT) Received: from wintermute.localdomain (cpe-76-183-134-35.tx.res.rr.com. [76.183.134.35]) by smtp.gmail.com with ESMTPSA id i20-20020a9d6114000000b0060ae5f10973sm575601otj.15.2022.05.19.09.45.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 May 2022 09:45:53 -0700 (PDT) From: Chris Morgan To: linux-pm@vger.kernel.org Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, heiko@sntech.de, sre@kernel.org, jon.lin@rock-chips.com, zyw@rock-chips.com, zhangqing@rock-chips.com, Chris Morgan , Maya Matuszczyk Subject: [PATCH 4/4 v7] arm64: dts: rockchip: add rk817 chg to Odroid Go Advance Date: Thu, 19 May 2022 11:45:33 -0500 Message-Id: <20220519164533.1961-5-macroalpha82@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220519164533.1961-1-macroalpha82@gmail.com> References: <20220519164533.1961-1-macroalpha82@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220519_094553_886905_2EE0B9F2 X-CRM114-Status: GOOD ( 10.70 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org From: Chris Morgan Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by: Chris Morgan Signed-off-by: Maya Matuszczyk --- .../boot/dts/rockchip/rk3326-odroid-go2.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index ea0695b51ecd..ba72e6716e8c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -52,6 +52,25 @@ backlight: backlight { pwms = <&pwm1 0 25000 0>; }; + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4100000>; + voltage-min-design-microvolt = <3500000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, + <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, + <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, + <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, + <3574170 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +491,13 @@ usb_midu: BOOST { }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; };