From patchwork Tue Aug 16 12:15:21 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Westphal X-Patchwork-Id: 12944798 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6CF2BC32773 for ; Tue, 16 Aug 2022 12:18:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235521AbiHPMSW (ORCPT ); Tue, 16 Aug 2022 08:18:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46026 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235519AbiHPMSE (ORCPT ); Tue, 16 Aug 2022 08:18:04 -0400 Received: from Chamillionaire.breakpoint.cc (Chamillionaire.breakpoint.cc [IPv6:2a0a:51c0:0:12e:520::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7078C10543; Tue, 16 Aug 2022 05:15:36 -0700 (PDT) Received: from fw by Chamillionaire.breakpoint.cc with local (Exim 4.92) (envelope-from ) id 1oNvTq-0000oW-K9; Tue, 16 Aug 2022 14:15:34 +0200 From: Florian Westphal To: Cc: shuah@kernel.org, linux-kselftest@vger.kernel.org, Florian Westphal Subject: [PATCH nf 1/2] testing: selftests: nft_flowtable.sh: use random netns names Date: Tue, 16 Aug 2022 14:15:21 +0200 Message-Id: <20220816121522.14278-2-fw@strlen.de> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220816121522.14278-1-fw@strlen.de> References: <20220816121522.14278-1-fw@strlen.de> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-kselftest@vger.kernel.org "ns1" is a too generic name, use a random suffix to avoid errors when such a netns exists. Also allows to run multiple instances of the script in parallel. Signed-off-by: Florian Westphal --- .../selftests/netfilter/nft_flowtable.sh | 246 +++++++++--------- 1 file changed, 128 insertions(+), 118 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index d4ffebb989f8..c336e6c148d1 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -14,6 +14,11 @@ # nft_flowtable.sh -o8000 -l1500 -r2000 # +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +nsr1="nsr1-$sfx" +nsr2="nsr2-$sfx" # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -36,18 +41,17 @@ checktool (){ checktool "nft --version" "run test without nft tool" checktool "ip -Version" "run test without ip tool" checktool "which nc" "run test without nc (netcat)" -checktool "ip netns add nsr1" "create net namespace" +checktool "ip netns add $nsr1" "create net namespace $nsr1" -ip netns add ns1 -ip netns add ns2 - -ip netns add nsr2 +ip netns add $ns1 +ip netns add $ns2 +ip netns add $nsr2 cleanup() { - for i in 1 2; do - ip netns del ns$i - ip netns del nsr$i - done + ip netns del $ns1 + ip netns del $ns2 + ip netns del $nsr1 + ip netns del $nsr2 rm -f "$ns1in" "$ns1out" rm -f "$ns2in" "$ns2out" @@ -59,22 +63,21 @@ trap cleanup EXIT sysctl -q net.netfilter.nf_log_all_netns=1 -ip link add veth0 netns nsr1 type veth peer name eth0 netns ns1 -ip link add veth1 netns nsr1 type veth peer name veth0 netns nsr2 +ip link add veth0 netns $nsr1 type veth peer name eth0 netns $ns1 +ip link add veth1 netns $nsr1 type veth peer name veth0 netns $nsr2 -ip link add veth1 netns nsr2 type veth peer name eth0 netns ns2 +ip link add veth1 netns $nsr2 type veth peer name eth0 netns $ns2 for dev in lo veth0 veth1; do - for i in 1 2; do - ip -net nsr$i link set $dev up - done + ip -net $nsr1 link set $dev up + ip -net $nsr2 link set $dev up done -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr2 addr add 10.0.2.1/24 dev veth1 -ip -net nsr2 addr add dead:2::1/64 dev veth1 +ip -net $nsr2 addr add 10.0.2.1/24 dev veth1 +ip -net $nsr2 addr add dead:2::1/64 dev veth1 # set different MTUs so we need to push packets coming from ns1 (large MTU) # to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1), @@ -106,49 +109,56 @@ do esac done -if ! ip -net nsr1 link set veth0 mtu $omtu; then +if ! ip -net $nsr1 link set veth0 mtu $omtu; then exit 1 fi -ip -net ns1 link set eth0 mtu $omtu +ip -net $ns1 link set eth0 mtu $omtu -if ! ip -net nsr2 link set veth1 mtu $rmtu; then +if ! ip -net $nsr2 link set veth1 mtu $rmtu; then exit 1 fi -ip -net ns2 link set eth0 mtu $rmtu +ip -net $ns2 link set eth0 mtu $rmtu # transfer-net between nsr1 and nsr2. # these addresses are not used for connections. -ip -net nsr1 addr add 192.168.10.1/24 dev veth1 -ip -net nsr1 addr add fee1:2::1/64 dev veth1 - -ip -net nsr2 addr add 192.168.10.2/24 dev veth0 -ip -net nsr2 addr add fee1:2::2/64 dev veth0 - -for i in 1 2; do - ip netns exec nsr$i sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec nsr$i sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - - ip -net ns$i link set lo up - ip -net ns$i link set eth0 up - ip -net ns$i addr add 10.0.$i.99/24 dev eth0 - ip -net ns$i route add default via 10.0.$i.1 - ip -net ns$i addr add dead:$i::99/64 dev eth0 - ip -net ns$i route add default via dead:$i::1 - if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then +ip -net $nsr1 addr add 192.168.10.1/24 dev veth1 +ip -net $nsr1 addr add fee1:2::1/64 dev veth1 + +ip -net $nsr2 addr add 192.168.10.2/24 dev veth0 +ip -net $nsr2 addr add fee1:2::2/64 dev veth0 + +for i in 0 1; do + ip netns exec $nsr1 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null + ip netns exec $nsr2 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null +done + +for ns in $ns1 $ns2;do + ip -net $ns link set lo up + ip -net $ns link set eth0 up + + if ! ip netns exec $ns sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then echo "ERROR: Check Originator/Responder values (problem during address addition)" exit 1 fi - # don't set ip DF bit for first two tests - ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null + ip netns exec $ns sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null done -ip -net nsr1 route add default via 192.168.10.2 -ip -net nsr2 route add default via 192.168.10.1 +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns2 addr add 10.0.2.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns2 addr add dead:2::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $ns2 route add default via dead:2::1 + +ip -net $nsr1 route add default via 192.168.10.2 +ip -net $nsr2 route add default via 192.168.10.1 -ip netns exec nsr1 nft -f - < /dev/null; then - echo "ERROR: ns1 cannot reach ns2" 1>&2 +if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach ns2" 1>&2 exit 1 fi -if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then - echo "ERROR: ns2 cannot reach ns1" 1>&2 +if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 exit 1 fi if [ $ret -eq 0 ];then - echo "PASS: netns routing/connectivity: ns1 can reach ns2" + echo "PASS: netns routing/connectivity: $ns1 can reach $ns2" fi ns1in=$(mktemp) @@ -312,24 +322,24 @@ make_file "$ns2in" # First test: # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2" else echo "FAIL: flow offload for ns1/ns2:" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # delete default route, i.e. ns2 won't be able to reach ns1 and # will depend on ns1 being masqueraded in nsr1. # expect ns1 has nsr1 address. -ip -net ns2 route del default via 10.0.2.1 -ip -net ns2 route del default via dead:2::1 -ip -net ns2 route add 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route del default via 10.0.2.1 +ip -net $ns2 route del default via dead:2::1 +ip -net $ns2 route add 192.168.10.1 via 10.0.2.1 # Second test: # Same, but with NAT enabled. -ip netns exec nsr1 nft -f - <&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Third test: # Same as second test, but with PMTU discovery enabled. -handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) +handle=$(ip netns exec $nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) -if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then +if ! ip netns exec $nsr1 nft delete rule inet filter forward $handle; then echo "FAIL: Could not delete large-packet accept rule" exit 1 fi -ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery" else echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset fi # Another test: # Add bridge interface br0 to Router1, with NAT enabled. -ip -net nsr1 link add name br0 type bridge -ip -net nsr1 addr flush dev veth0 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set veth0 master br0 -ip -net nsr1 addr add 10.0.1.1/24 dev br0 -ip -net nsr1 addr add dead:1::1/64 dev br0 -ip -net nsr1 link set up dev br0 +ip -net $nsr1 link add name br0 type bridge +ip -net $nsr1 addr flush dev veth0 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set veth0 master br0 +ip -net $nsr1 addr add 10.0.1.1/24 dev br0 +ip -net $nsr1 addr add dead:1::1/64 dev br0 +ip -net $nsr1 link set up dev br0 -ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null +ip netns exec $nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null # br0 with NAT enabled. -ip netns exec nsr1 nft -f - <&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Another test: # Add bridge interface br0 to Router1, with NAT and VLAN. -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set down dev veth0 -ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set up dev veth0.10 -ip -net nsr1 link set veth0.10 master br0 - -ip -net ns1 addr flush dev eth0 -ip -net ns1 link add link eth0 name eth0.10 type vlan id 10 -ip -net ns1 link set eth0 up -ip -net ns1 link set eth0.10 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0.10 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0.10 - -if test_tcp_forwarding_nat ns1 ns2; then +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set down dev veth0 +ip -net $nsr1 link add link veth0 name veth0.10 type vlan id 10 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set up dev veth0.10 +ip -net $nsr1 link set veth0.10 master br0 + +ip -net $ns1 addr flush dev eth0 +ip -net $ns1 link add link eth0 name eth0.10 type vlan id 10 +ip -net $ns1 link set eth0 up +ip -net $ns1 link set eth0.10 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0.10 + +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # restore test topology (remove bridge and VLAN) -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set veth0 down -ip -net nsr1 link set veth0.10 down -ip -net nsr1 link delete veth0.10 type vlan -ip -net nsr1 link delete br0 type bridge -ip -net ns1 addr flush dev eth0.10 -ip -net ns1 link set eth0.10 down -ip -net ns1 link set eth0 down -ip -net ns1 link delete eth0.10 type vlan +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set veth0 down +ip -net $nsr1 link set veth0.10 down +ip -net $nsr1 link delete veth0.10 type vlan +ip -net $nsr1 link delete br0 type bridge +ip -net $ns1 addr flush dev eth0.10 +ip -net $ns1 link set eth0.10 down +ip -net $ns1 link set eth0 down +ip -net $ns1 link delete eth0.10 type vlan # restore address in ns1 and nsr1 -ip -net ns1 link set eth0 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0 -ip -net ns1 route add default via dead:1::1 -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr1 link set up dev veth0 +ip -net $ns1 link set eth0 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 link set up dev veth0 KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) @@ -480,23 +490,23 @@ do_esp() { } -do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 +do_esp $nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 -do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 +do_esp $nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 -ip netns exec nsr1 nft delete table ip nat +ip netns exec $nsr1 nft delete table ip nat # restore default routes -ip -net ns2 route del 192.168.10.1 via 10.0.2.1 -ip -net ns2 route add default via 10.0.2.1 -ip -net ns2 route add default via dead:2::1 +ip -net $ns2 route del 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns2 route add default via dead:2::1 -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" - ip netns exec nsr1 nft list ruleset 1>&2 - ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2 + ip netns exec $nsr1 nft list ruleset 1>&2 + ip netns exec $nsr1 cat /proc/net/xfrm_stat 1>&2 fi exit $ret From patchwork Tue Aug 16 12:15:22 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Westphal X-Patchwork-Id: 12944800 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E6BD6C2BB41 for ; Tue, 16 Aug 2022 12:18:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233448AbiHPMS0 (ORCPT ); Tue, 16 Aug 2022 08:18:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46460 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234889AbiHPMSH (ORCPT ); Tue, 16 Aug 2022 08:18:07 -0400 Received: from Chamillionaire.breakpoint.cc (Chamillionaire.breakpoint.cc [IPv6:2a0a:51c0:0:12e:520::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8020C3134B; Tue, 16 Aug 2022 05:15:40 -0700 (PDT) Received: from fw by Chamillionaire.breakpoint.cc with local (Exim 4.92) (envelope-from ) id 1oNvTu-0000oi-Ol; Tue, 16 Aug 2022 14:15:38 +0200 From: Florian Westphal To: Cc: shuah@kernel.org, linux-kselftest@vger.kernel.org, Florian Westphal Subject: [PATCH nf 2/2] testing: selftests: nft_flowtable.sh: rework test to detect offload failure Date: Tue, 16 Aug 2022 14:15:22 +0200 Message-Id: <20220816121522.14278-3-fw@strlen.de> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220816121522.14278-1-fw@strlen.de> References: <20220816121522.14278-1-fw@strlen.de> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-kselftest@vger.kernel.org This test fails on current kernel releases because the flotwable path now calls dst_check from packet path and will then remove the offload. Test script has two purposes: 1. check that file (random content) can be sent to other netns (and vv) 2. check that the flow is offloaded (rather than handled by classic forwarding path). Since dst_check is in place, 2) fails because the nftables ruleset in router namespace 1 intentionally blocks traffic under the assumption that packets are not passed via classic path at all. Rework this: Instead of blocking traffic, create two named counters, one for original and one for reverse direction. The first three test cases are handled by classic forwarding path (path mtu discovery is disabled and packets exceed MTU). But all other tests enable PMTUD, so the originator and responder are expected to lower packet size and flowtable is expected to do the packet forwarding. For those tests, check that the packet counters (which are only incremented for packets that are passed up to classic forward path) are significantly lower than the file size transferred. I've tested that the counter-checks fail as expected when the 'flow add' statement is removed from the ruleset. Signed-off-by: Florian Westphal --- .../selftests/netfilter/nft_flowtable.sh | 141 +++++++++++------- 1 file changed, 84 insertions(+), 57 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index c336e6c148d1..e31d3d68a251 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -24,8 +24,7 @@ nsr2="nsr2-$sfx" ksft_skip=4 ret=0 -ns1in="" -ns2in="" +nsin="" ns1out="" ns2out="" @@ -53,8 +52,7 @@ cleanup() { ip netns del $nsr1 ip netns del $nsr2 - rm -f "$ns1in" "$ns1out" - rm -f "$ns2in" "$ns2out" + rm -f "$nsin" "$ns1out" [ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns } @@ -165,36 +163,20 @@ table inet filter { devices = { veth0, veth1 } } + counter routed_orig { } + counter routed_repl { } + chain forward { type filter hook forward priority 0; policy drop; # flow offloaded? Tag ct with mark 1, so we can detect when it fails. - meta oif "veth1" tcp dport 12345 flow offload @f1 counter - - # use packet size to trigger 'should be offloaded by now'. - # otherwise, if 'flow offload' expression never offloads, the - # test will pass. - tcp dport 12345 meta length gt 200 ct mark set 1 counter - - # this turns off flow offloading internally, so expect packets again - tcp flags fin,rst ct mark set 0 accept - - # this allows large packets from responder, we need this as long - # as PMTUd is off. - # This rule is deleted for the last test, when we expect PMTUd - # to kick in and ensure all packets meet mtu requirements. - meta length gt $lmtu accept comment something-to-grep-for + meta oif "veth1" tcp dport 12345 ct mark set 1 flow add @f1 counter name routed_orig accept - # next line blocks connection w.o. working offload. - # we only do this for reverse dir, because we expect packets to - # enter slow path due to MTU mismatch of veth0 and veth1. - tcp sport 12345 ct mark 1 counter log prefix "mark failure " drop + # count packets supposedly offloaded as per direction. + ct mark 1 counter name ct direction map { original : routed_orig, reply : routed_repl } accept ct state established,related accept - # for packets that we can't offload yet, i.e. SYN (any ct that is not confirmed) - meta length lt 200 oif "veth1" tcp dport 12345 counter accept - meta nfproto ipv4 meta l4proto icmp accept meta nfproto ipv6 meta l4proto icmpv6 accept } @@ -221,16 +203,16 @@ if [ $ret -eq 0 ];then echo "PASS: netns routing/connectivity: $ns1 can reach $ns2" fi -ns1in=$(mktemp) +nsin=$(mktemp) ns1out=$(mktemp) -ns2in=$(mktemp) ns2out=$(mktemp) make_file() { name=$1 - SIZE=$((RANDOM % (1024 * 8))) + SIZE=$((RANDOM % (1024 * 128))) + SIZE=$((SIZE + (1024 * 8))) TSIZE=$((SIZE * 1024)) dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null @@ -241,6 +223,38 @@ make_file() dd if=/dev/urandom conf=notrunc of="$name" bs=1 count=$SIZE 2> /dev/null } +check_counters() +{ + local what=$1 + local ok=1 + + local orig=$(ip netns exec $nsr1 nft reset counter inet filter routed_orig | grep packets) + local repl=$(ip netns exec $nsr1 nft reset counter inet filter routed_repl | grep packets) + + local orig_cnt=${orig#*bytes} + local repl_cnt=${repl#*bytes} + + local fs=$(du -sb $nsin) + local max_orig=${fs%%/*} + local max_repl=$((max_orig/4)) + + if [ $orig_cnt -gt $max_orig ];then + echo "FAIL: $what: original counter $orig_cnt exceeds expected value $max_orig" 1>&2 + ret=1 + ok=0 + fi + + if [ $repl_cnt -gt $max_repl ];then + echo "FAIL: $what: reply counter $repl_cnt exceeds expected value $max_repl" 1>&2 + ret=1 + ok=0 + fi + + if [ $ok -eq 1 ]; then + echo "PASS: $what" + fi +} + check_transfer() { in=$1 @@ -265,11 +279,11 @@ test_tcp_forwarding_ip() local dstport=$4 local lret=0 - ip netns exec $nsb nc -w 5 -l -p 12345 < "$ns2in" > "$ns2out" & + ip netns exec $nsb nc -w 5 -l -p 12345 < "$nsin" > "$ns2out" & lpid=$! sleep 1 - ip netns exec $nsa nc -w 4 "$dstip" "$dstport" < "$ns1in" > "$ns1out" & + ip netns exec $nsa nc -w 4 "$dstip" "$dstport" < "$nsin" > "$ns1out" & cpid=$! sleep 3 @@ -284,11 +298,11 @@ test_tcp_forwarding_ip() wait - if ! check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"; then + if ! check_transfer "$nsin" "$ns2out" "ns1 -> ns2"; then lret=1 fi - if ! check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"; then + if ! check_transfer "$nsin" "$ns1out" "ns1 <- ns2"; then lret=1 fi @@ -305,23 +319,40 @@ test_tcp_forwarding() test_tcp_forwarding_nat() { local lret + local pmtu test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345 lret=$? + pmtu=$3 + what=$4 + if [ $lret -eq 0 ] ; then + if [ $pmtu -eq 1 ] ;then + check_counters "flow offload for ns1/ns2 with masquerade and pmtu discovery $what" + else + echo "PASS: flow offload for ns1/ns2 with masquerade $what" + fi + test_tcp_forwarding_ip "$1" "$2" 10.6.6.6 1666 lret=$? + if [ $pmtu -eq 1 ] ;then + check_counters "flow offload for ns1/ns2 with dnat and pmtu discovery $what" + elif [ $lret -eq 0 ] ; then + echo "PASS: flow offload for ns1/ns2 with dnat $what" + fi fi return $lret } -make_file "$ns1in" -make_file "$ns2in" +make_file "$nsin" # First test: # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. +# Due to MTU mismatch in both directions, all packets (except small packets like pure +# acks) have to be handled by normal forwarding path. Therefore, packet counters +# are not checked. if test_tcp_forwarding $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2" else @@ -338,7 +369,8 @@ ip -net $ns2 route del default via dead:2::1 ip -net $ns2 route add 192.168.10.1 via 10.0.2.1 # Second test: -# Same, but with NAT enabled. +# Same, but with NAT enabled. Same as in first test: we expect normal forward path +# to handle most packets. ip netns exec $nsr1 nft -f - <&2 ip netns exec $nsr1 nft list ruleset ret=1 fi # Third test: -# Same as second test, but with PMTU discovery enabled. -handle=$(ip netns exec $nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) - -if ! ip netns exec $nsr1 nft delete rule inet filter forward $handle; then - echo "FAIL: Could not delete large-packet accept rule" - exit 1 -fi - +# Same as second test, but with PMTU discovery enabled. This +# means that we expect the fastpath to handle packets as soon +# as the endpoints adjust the packet size. ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -if test_tcp_forwarding_nat $ns1 $ns2; then - echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery" -else +# reset counters. +# With pmtu in-place we'll also check that nft counters +# are lower than file size and packets were forwarded via flowtable layer. +# For earlier tests (large mtus), packets cannot be handled via flowtable +# (except pure acks and other small packets). +ip netns exec $nsr1 nft reset counters table inet filter >/dev/null + +if ! test_tcp_forwarding_nat $ns1 $ns2 1 ""; then echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 ip netns exec $nsr1 nft list ruleset fi @@ -408,14 +438,13 @@ table ip nat { } EOF -if test_tcp_forwarding_nat $ns1 $ns2; then - echo "PASS: flow offloaded for ns1/ns2 with bridge NAT" -else +if ! test_tcp_forwarding_nat $ns1 $ns2 1 "on bridge"; then echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2 ip netns exec $nsr1 nft list ruleset ret=1 fi + # Another test: # Add bridge interface br0 to Router1, with NAT and VLAN. ip -net $nsr1 link set veth0 nomaster @@ -433,9 +462,7 @@ ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10 ip -net $ns1 route add default via 10.0.1.1 ip -net $ns1 addr add dead:1::99/64 dev eth0.10 -if test_tcp_forwarding_nat $ns1 $ns2; then - echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" -else +if ! test_tcp_forwarding_nat $ns1 $ns2 1 "bridge and VLAN"; then echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 ip netns exec $nsr1 nft list ruleset ret=1 @@ -502,7 +529,7 @@ ip -net $ns2 route add default via 10.0.2.1 ip -net $ns2 route add default via dead:2::1 if test_tcp_forwarding $ns1 $ns2; then - echo "PASS: ipsec tunnel mode for ns1/ns2" + check_counters "ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" ip netns exec $nsr1 nft list ruleset 1>&2