From patchwork Thu Sep 22 08:13:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sascha Hauer X-Patchwork-Id: 12984703 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 03979C6FA82 for ; Thu, 22 Sep 2022 08:15:19 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=MFD8KOZTIK1UQiMFHk5WvFNMcRb8CetyoDlpTpinJ8Y=; b=tY6zYVmzW3+9zN hNkxsP38KaLygjwFI94/Pr9snah5FDq1NW1z9X1wM491ffsI3YYAVitnWdaYtjLn47YmWRArJDz4B 1w2j0uvJ/Vm9yteziri129FqsyC2A/0qnQojXD//kNFQfvQBrBlyZ2Yj9b4SnOaiD8ac3hvqFsVK0 fsqzVjcjclBMpy9Xt9kKsHMSrS8CboA40YCOQOD4SafLwLuG53YlHgDQn13+mvEJXCbov2OF128V2 HrVBT1ZupQ4LV7c5vvOLrQWt8lzs2QpqZRfhOoONbIxxLg8bfuCEuaNKuppE2bMu3VQxP0SUZfK5v W7s0zXuqKR7bf1EcM2FA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLU-00E3GA-Ql; Thu, 22 Sep 2022 08:14:08 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLE-00E38Z-4X for linux-arm-kernel@lists.infradead.org; Thu, 22 Sep 2022 08:13:53 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1obHLC-0001RK-PC; Thu, 22 Sep 2022 10:13:50 +0200 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1obHLC-002DC7-Rc; Thu, 22 Sep 2022 10:13:49 +0200 Received: from sha by dude02.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1obHLA-00GbB4-B6; Thu, 22 Sep 2022 10:13:48 +0200 From: Sascha Hauer To: devicetree@vger.kernel.org Cc: Rob Herring , linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Krzysztof Kozlowski , Shawn Guo , Sascha Hauer , Rob Herring Subject: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add prefix for InnoComm Date: Thu, 22 Sep 2022 10:13:45 +0200 Message-Id: <20220922081347.3860008-2-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20220922081347.3860008-1-s.hauer@pengutronix.de> References: <20220922081347.3860008-1-s.hauer@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-arm-kernel@lists.infradead.org X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220922_011352_214287_0CF322F8 X-CRM114-Status: GOOD ( 10.56 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org This adds a vendor prefix for InnoComm Mobile Technology Corp., see https://www.innocomm.com/. Signed-off-by: Sascha Hauer Reviewed-by: Rob Herring --- Notes: Changes since v1: - Fix spelling of InnoComm Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2f0151e9f6bef..2ddb4778a06ad 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -601,6 +601,8 @@ patternProperties: description: Ingenic Semiconductor "^injoinic,.*": description: Injoinic Technology Corp. + "^innocomm,.*": + description: InnoComm Mobile Technology Corp. "^innolux,.*": description: Innolux Corporation "^inside-secure,.*": From patchwork Thu Sep 22 08:13:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sascha Hauer X-Patchwork-Id: 12984704 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 6A2DDC6FA8B for ; Thu, 22 Sep 2022 08:15:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=vmufN+WMAmjrt2sbTryAu1iNurtd3j8VdBlKc4FKKD8=; b=mmIxaq35cqlOKN gOFzltMv9KM19t8F+NM21DgfwrYOphjT0njxV4UMd6PhfWcbHoUge8fxGaAEnK/AFALcMW0og82/+ vcBCOlVwm6e9Labba0utQ1mtlbDpQ9fFrxDxZarS6xE6RC8fhxb5YfMvXCnlQGuBgIA5aRZGqUzqj U0v0cr/X3Sw6lWkvuP4RFeohdEPWYDo0dR6GxRbpNF818wf+sgQFCuRYTRfiyDZBDOOAjidL5/OJo s81pEO6UX2vk3be3+A/cue7DwAODrnCeQgMC9FTXdC6szHWd1y2OhuZnTThqQMB+FGNhXUhoA1LE7 0sYpBTK0TLurgJJwyaHg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLJ-00E3BJ-0T; Thu, 22 Sep 2022 08:13:57 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLE-00E38b-5w for linux-arm-kernel@lists.infradead.org; Thu, 22 Sep 2022 08:13:53 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1obHLC-0001RJ-RZ; Thu, 22 Sep 2022 10:13:50 +0200 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1obHLC-002DC6-Qq; Thu, 22 Sep 2022 10:13:49 +0200 Received: from sha by dude02.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1obHLA-00GbBD-Bn; Thu, 22 Sep 2022 10:13:48 +0200 From: Sascha Hauer To: devicetree@vger.kernel.org Cc: Rob Herring , linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Krzysztof Kozlowski , Shawn Guo , Sascha Hauer , Rob Herring Subject: [PATCH v4 2/3] dt-bindings: arm: fsl: Add InnoComm WB15 EVK Date: Thu, 22 Sep 2022 10:13:46 +0200 Message-Id: <20220922081347.3860008-3-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20220922081347.3860008-1-s.hauer@pengutronix.de> References: <20220922081347.3860008-1-s.hauer@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-arm-kernel@lists.infradead.org X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220922_011352_248359_551EC3AA X-CRM114-Status: GOOD ( 10.69 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add board compatibles for the InnoComm WB15 EVK board. Signed-off-by: Sascha Hauer Reviewed-by: Rob Herring --- Notes: Changes since v1: - Fix spelling of InnoComm Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7431579ab0e85..eca63433ac057 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -831,6 +831,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - innocomm,wb15-evk # i.MX8MM Innocomm EVK board with WB15 SoM - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules From patchwork Thu Sep 22 08:13:47 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sascha Hauer X-Patchwork-Id: 12984705 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 13F2BC6FA8B for ; Thu, 22 Sep 2022 08:15:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=7Y91qxGkcxQyaO7D1b1ElYQ/Uy7CcF20GctDniJ82qQ=; b=qW7hgrICR6Mfjh mz9gYeVTO0p37Zbw0oktm0tu7Ciky94Io3LcUpLnmK6YSZeXiqygwDq1ONAuQG+d7wwWTN3eB6rwi bb/81QOo4daYyU8+FrXa29TvMYqXSdAs8V3uTbqibzBG5eyBovDP+puXuob62CJzZ4kCaXbdgprMG BohMmWEMHgbZyYKm6RFCj91wUt01F8SlDm4/YZ+4iS5dLn8ALgLZU6RNVrnYDXzU+2/im3eszMKjv TW776uOKzkM5dToS6GZJN4iHINvuqAqMeWI4OGMkc4+SGpKFGqDkb6ivYgzXywa8EHNvgl3UTRKA4 VW9JBO6K4WUuSu6TRtOQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLh-00E3N7-IE; Thu, 22 Sep 2022 08:14:21 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1obHLE-00E38a-56 for linux-arm-kernel@lists.infradead.org; Thu, 22 Sep 2022 08:13:55 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1obHLC-0001RL-PC; Thu, 22 Sep 2022 10:13:50 +0200 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1obHLD-002DCC-87; Thu, 22 Sep 2022 10:13:49 +0200 Received: from sha by dude02.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1obHLA-00GbBW-CO; Thu, 22 Sep 2022 10:13:48 +0200 From: Sascha Hauer To: devicetree@vger.kernel.org Cc: Rob Herring , linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Krzysztof Kozlowski , Shawn Guo , Sascha Hauer Subject: [PATCH v4 3/3] arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK Date: Thu, 22 Sep 2022 10:13:47 +0200 Message-Id: <20220922081347.3860008-4-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20220922081347.3860008-1-s.hauer@pengutronix.de> References: <20220922081347.3860008-1-s.hauer@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-arm-kernel@lists.infradead.org X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220922_011352_585894_A94965F0 X-CRM114-Status: GOOD ( 17.36 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a half credit card sized board featuring: - i.MX8MM CPU - LPDDR4, 1GiB - eMMC, 8GiB - 1Gb Ethernet RGMII interface - WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2 Signed-off-by: Sascha Hauer Reviewed-by: Krzysztof Kozlowski --- Notes: Changes since v3: - Remove unnecessary status = "okay" from new node Changes since v2: - Fix remaining s/innocom/innocomm/ - no underscores in node names - use IRQ_TYPE_LEVEL_LOW for specifying GPIO interrupt polarity Changes since v1: - Fix spelling of InnoComm arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx8mm-innocomm-wb15-evk.dts | 146 ++++++ .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ 3 files changed, 627 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8bf7f7ecebaa1..387746c8d8dc2 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts new file mode 100644 index 0000000000000..055faae79930c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Bang & Olufsen + * Copyright 2022 Pengutronix + */ + +/dts-v1/; + +#include "imx8mm-innocomm-wb15.dtsi" + +/ { + model = "InnoComm WB15-EVK"; + compatible = "innocomm,wb15-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + label = "debug"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vsd_3v3>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ethphy: regulator-eth-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy_reg>; + regulator-name = "PHY_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-supply = <®_ethphy>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fec-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_fec_phy: fec-phy-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_fec_phy_reg: fec-phy-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x16 + >; + }; + + pinctrl_gpio_leds: led-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0xd6 + >; + }; + + pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi new file mode 100644 index 0000000000000..59be159315942 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Bang & Olufsen + */ + +#include "imx8mm.dtsi" +#include + +/ { + reg_modem: regulator-modem { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_modem_regulator>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "epdev_on"; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_3v3_out: regulator-3v3-out { + compatible = "regulator-fixed"; + regulator-name = "3V3_OUT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <850000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <850000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // buck5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // buck6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // buck7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // buck8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + fsl,max-link-speed = <1>; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&uart1 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + fsl,uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4349-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_modem_bt>; + device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + vbat-supply = <®_3v3_out>; + vddio-supply = <®_3v3_out>; + clocks = <&osc_32k>; + max-speed = <3000000>; + clock-names = "extclk"; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */ + +&iomuxc { + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3 + >; + }; + + pinctrl_pcie0: pcie0-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61 + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x6 + >; + }; + + pinctrl_modem_bt: modem-bt-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 + MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x19 + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 + MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; + + pinctrl_modem_regulator: modem-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41 + >; + }; + + pinctrl_pmic: pmic-irq-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};