From patchwork Fri Oct 21 02:07:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiawen Wu X-Patchwork-Id: 13014192 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CEF48C4332F for ; Fri, 21 Oct 2022 01:57:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229872AbiJUB5F (ORCPT ); Thu, 20 Oct 2022 21:57:05 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59412 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229880AbiJUB5E (ORCPT ); Thu, 20 Oct 2022 21:57:04 -0400 Received: from smtpbgeu1.qq.com (smtpbgeu1.qq.com [52.59.177.22]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ED49A22B3AA for ; Thu, 20 Oct 2022 18:56:58 -0700 (PDT) X-QQ-mid: bizesmtp66t1666317413tze9qvge Received: from wxdbg.localdomain.com ( [183.129.236.74]) by bizesmtp.qq.com (ESMTP) with id ; Fri, 21 Oct 2022 09:56:52 +0800 (CST) X-QQ-SSF: 01400000000000H0V000000A0000000 X-QQ-FEAT: ILHsT53NKPi33s6MV+Vu5OpePjz+tSWk5DP8h37PFwbE82PgpTiE0VrJVQgTo jKzHEVWkp57nSbxKJGR/3SU4z+w3xn8JWa5dG+bnBYPplhO/TYB0qQCw6JXshellZ/O4JWj f6DpwVpEunvXtwow59gY8vU34BVM8zdvoNJn5KHO8hcvxucYkyZ20fLifZtfshAhmEmItfY +SQznSDhM0kAPbt12khvxv8tJMkdEsqHRPadP2OIYTnuSAaWECkS0ULY6ctgxRmRQ+zYjvp 1vyWfQRqC39UF49GHHN7C0mat9mkAliusd7wo5kTrZ5mGtFRycvfVO2Y5XdfMASX13ZlXrg 5HgY5HQJf8H8Exn1mg44L2s+q34se1jntj5qawPUXMkoHLcijQC9ND3MeMfhQ== X-QQ-GoodBg: 2 From: Jiawen Wu To: netdev@vger.kernel.org Cc: mengyuanlou@net-swift.com, Jiawen Wu Subject: [RESEND PATCH net-next v4 1/3] net: txgbe: Store PCI info Date: Fri, 21 Oct 2022 10:07:18 +0800 Message-Id: <20221021020720.519223-2-jiawenwu@trustnetic.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20221021020720.519223-1-jiawenwu@trustnetic.com> References: <20221021020720.519223-1-jiawenwu@trustnetic.com> MIME-Version: 1.0 X-QQ-SENDSIZE: 520 Feedback-ID: bizesmtp:trustnetic.com:qybglogicsvr:qybglogicsvr5 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Get PCI config space info, set LAN id and check flash status. Signed-off-by: Jiawen Wu --- drivers/net/ethernet/wangxun/Kconfig | 6 ++ drivers/net/ethernet/wangxun/Makefile | 1 + drivers/net/ethernet/wangxun/libwx/Makefile | 7 ++ drivers/net/ethernet/wangxun/libwx/wx_hw.c | 88 +++++++++++++++ drivers/net/ethernet/wangxun/libwx/wx_hw.h | 10 ++ drivers/net/ethernet/wangxun/libwx/wx_type.h | 56 ++++++++++ drivers/net/ethernet/wangxun/txgbe/txgbe.h | 4 + .../net/ethernet/wangxun/txgbe/txgbe_main.c | 101 +++++++++++++++++- .../net/ethernet/wangxun/txgbe/txgbe_type.h | 19 ++-- 9 files changed, 282 insertions(+), 10 deletions(-) create mode 100644 drivers/net/ethernet/wangxun/libwx/Makefile create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.c create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.h create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_type.h diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig index f5d43d8c9629..565fa826b056 100644 --- a/drivers/net/ethernet/wangxun/Kconfig +++ b/drivers/net/ethernet/wangxun/Kconfig @@ -16,6 +16,11 @@ config NET_VENDOR_WANGXUN if NET_VENDOR_WANGXUN +config LIBWX + tristate + help + Common library for Wangxun(R) Ethernet drivers. + config NGBE tristate "Wangxun(R) GbE PCI Express adapters support" depends on PCI @@ -32,6 +37,7 @@ config NGBE config TXGBE tristate "Wangxun(R) 10GbE PCI Express adapters support" depends on PCI + select LIBWX help This driver supports Wangxun(R) 10GbE PCI Express family of adapters. diff --git a/drivers/net/ethernet/wangxun/Makefile b/drivers/net/ethernet/wangxun/Makefile index ac3fb06b233c..ca19311dbe38 100644 --- a/drivers/net/ethernet/wangxun/Makefile +++ b/drivers/net/ethernet/wangxun/Makefile @@ -3,5 +3,6 @@ # Makefile for the Wangxun network device drivers. # +obj-$(CONFIG_LIBWX) += libwx/ obj-$(CONFIG_TXGBE) += txgbe/ obj-$(CONFIG_NGBE) += ngbe/ diff --git a/drivers/net/ethernet/wangxun/libwx/Makefile b/drivers/net/ethernet/wangxun/libwx/Makefile new file mode 100644 index 000000000000..1ed5e23af944 --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. +# + +obj-$(CONFIG_LIBWX) += libwx.o + +libwx-objs := wx_hw.o diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c new file mode 100644 index 000000000000..fed51c2f3071 --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include +#include + +#include "wx_type.h" +#include "wx_hw.h" + +/* cmd_addr is used for some special command: + * 1. to be sector address, when implemented erase sector command + * 2. to be flash address when implemented read, write flash address + */ +static int wx_fmgr_cmd_op(struct wx_hw *wxhw, u32 cmd, u32 cmd_addr) +{ + u32 cmd_val = 0, val = 0; + + cmd_val = WX_SPI_CMD_CMD(cmd) | + WX_SPI_CMD_CLK(WX_SPI_CLK_DIV) | + cmd_addr; + wr32(wxhw, WX_SPI_CMD, cmd_val); + + return read_poll_timeout(rd32, val, (val & 0x1), 10, 100000, + false, wxhw, WX_SPI_STATUS); +} + +static int wx_flash_read_dword(struct wx_hw *wxhw, u32 addr, u32 *data) +{ + int ret = 0; + + ret = wx_fmgr_cmd_op(wxhw, WX_SPI_CMD_READ_DWORD, addr); + if (ret < 0) + return ret; + + *data = rd32(wxhw, WX_SPI_DATA); + + return ret; +} + +int wx_check_flash_load(struct wx_hw *hw, u32 check_bit) +{ + u32 reg = 0; + int err = 0; + + /* if there's flash existing */ + if (!(rd32(hw, WX_SPI_STATUS) & + WX_SPI_STATUS_FLASH_BYPASS)) { + /* wait hw load flash done */ + err = read_poll_timeout(rd32, reg, !(reg & check_bit), 20000, 2000000, + false, hw, WX_SPI_ILDR_STATUS); + if (err < 0) + wx_err(hw, "Check flash load timeout.\n"); + } + + return err; +} +EXPORT_SYMBOL(wx_check_flash_load); + +int wx_sw_init(struct wx_hw *wxhw) +{ + struct pci_dev *pdev = wxhw->pdev; + u32 ssid = 0; + int err = 0; + + wxhw->vendor_id = pdev->vendor; + wxhw->device_id = pdev->device; + wxhw->revision_id = pdev->revision; + wxhw->oem_svid = pdev->subsystem_vendor; + wxhw->oem_ssid = pdev->subsystem_device; + wxhw->bus.device = PCI_SLOT(pdev->devfn); + wxhw->bus.func = PCI_FUNC(pdev->devfn); + + if (wxhw->oem_svid == PCI_VENDOR_ID_WANGXUN) { + wxhw->subsystem_vendor_id = pdev->subsystem_vendor; + wxhw->subsystem_device_id = pdev->subsystem_device; + } else { + err = wx_flash_read_dword(wxhw, 0xfffdc, &ssid); + if (!err) + wxhw->subsystem_device_id = swab16((u16)ssid); + + return err; + } + + return 0; +} +EXPORT_SYMBOL(wx_sw_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h new file mode 100644 index 000000000000..42e95283242c --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _WX_HW_H_ +#define _WX_HW_H_ + +int wx_check_flash_load(struct wx_hw *hw, u32 check_bit); +int wx_sw_init(struct wx_hw *wxhw); + +#endif /* _WX_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h new file mode 100644 index 000000000000..fa06443ca4f5 --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _WX_TYPE_H_ +#define _WX_TYPE_H_ + +/* Vendor ID */ +#ifndef PCI_VENDOR_ID_WANGXUN +#define PCI_VENDOR_ID_WANGXUN 0x8088 +#endif + +/* FMGR Registers */ +#define WX_SPI_CMD 0x10104 +#define WX_SPI_CMD_READ_DWORD 0x1 +#define WX_SPI_CLK_DIV 0x3 +#define WX_SPI_CMD_CMD(_v) (((_v) & 0x7) << 28) +#define WX_SPI_CMD_CLK(_v) (((_v) & 0x7) << 25) +#define WX_SPI_CMD_ADDR(_v) (((_v) & 0xFFFFFF)) +#define WX_SPI_DATA 0x10108 +#define WX_SPI_DATA_BYPASS BIT(31) +#define WX_SPI_DATA_STATUS(_v) (((_v) & 0xFF) << 16) +#define WX_SPI_DATA_OP_DONE BIT(0) +#define WX_SPI_STATUS 0x1010C +#define WX_SPI_STATUS_OPDONE BIT(0) +#define WX_SPI_STATUS_FLASH_BYPASS BIT(31) +#define WX_SPI_ILDR_STATUS 0x10120 + +/* Bus parameters */ +struct wx_bus_info { + u8 func; + u16 device; +}; + +struct wx_hw { + u8 __iomem *hw_addr; + struct pci_dev *pdev; + struct wx_bus_info bus; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; + u16 oem_ssid; + u16 oem_svid; +}; + +/** + * register operations + **/ +#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg))) +#define rd32(a, reg) readl((a)->hw_addr + (reg)) + +#define wx_err(wxhw, fmt, arg...) \ + dev_err(&(wxhw)->pdev->dev, fmt, ##arg) + +#endif /* _WX_TYPE_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h index 38ddbde0ed0f..9a97b85be3ac 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h @@ -17,6 +17,10 @@ struct txgbe_adapter { /* OS defined structs */ struct net_device *netdev; struct pci_dev *pdev; + + /* structs defined in txgbe_type.h */ + struct txgbe_hw hw; + u16 msg_enable; }; extern char txgbe_driver_name[]; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index d3b9f73ecba4..71ea197fe299 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -9,6 +9,8 @@ #include #include +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" #include "txgbe.h" char txgbe_driver_name[] = "txgbe"; @@ -30,6 +32,69 @@ static const struct pci_device_id txgbe_pci_tbl[] = { #define DEFAULT_DEBUG_LEVEL_SHIFT 3 +static void txgbe_check_minimum_link(struct txgbe_adapter *adapter) +{ + struct pci_dev *pdev; + + pdev = adapter->pdev; + pcie_print_link_status(pdev); +} + +/** + * txgbe_enumerate_functions - Get the number of ports this device has + * @adapter: adapter structure + * + * This function enumerates the phsyical functions co-located on a single slot, + * in order to determine how many ports a device has. This is most useful in + * determining the required GT/s of PCIe bandwidth necessary for optimal + * performance. + **/ +static int txgbe_enumerate_functions(struct txgbe_adapter *adapter) +{ + struct pci_dev *entry, *pdev = adapter->pdev; + int physfns = 0; + + list_for_each_entry(entry, &pdev->bus->devices, bus_list) { + /* When the devices on the bus don't all match our device ID, + * we can't reliably determine the correct number of + * functions. This can occur if a function has been direct + * attached to a virtual machine using VT-d. + */ + if (entry->vendor != pdev->vendor || + entry->device != pdev->device) + return -EINVAL; + + physfns++; + } + + return physfns; +} + +/** + * txgbe_sw_init - Initialize general software structures (struct txgbe_adapter) + * @adapter: board private structure to initialize + **/ +static int txgbe_sw_init(struct txgbe_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + int err; + + wxhw->hw_addr = adapter->io_addr; + wxhw->pdev = pdev; + + /* PCI config space info */ + err = wx_sw_init(wxhw); + if (err < 0) { + netif_err(adapter, probe, adapter->netdev, + "read of internal subsystem device id failed\n"); + return err; + } + + return 0; +} + static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct txgbe_adapter *adapter = pci_get_drvdata(pdev); @@ -67,8 +132,10 @@ static int txgbe_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) { struct txgbe_adapter *adapter = NULL; + struct txgbe_hw *hw = NULL; + struct wx_hw *wxhw = NULL; struct net_device *netdev; - int err; + int err, expected_gts; err = pci_enable_device_mem(pdev); if (err) @@ -107,6 +174,9 @@ static int txgbe_probe(struct pci_dev *pdev, adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; + hw = &adapter->hw; + wxhw = &hw->wxhw; + adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; adapter->io_addr = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 0), @@ -116,10 +186,39 @@ static int txgbe_probe(struct pci_dev *pdev, goto err_pci_release_regions; } + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + /* setup the private structure */ + err = txgbe_sw_init(adapter); + if (err) + goto err_pci_release_regions; + + /* check if flash load is done after hw power up */ + err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PERST); + if (err) + goto err_pci_release_regions; + err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PWRRST); + if (err) + goto err_pci_release_regions; + netdev->features |= NETIF_F_HIGHDMA; pci_set_drvdata(pdev, adapter); + /* calculate the expected PCIe bandwidth required for optimal + * performance. Note that some older parts will never have enough + * bandwidth due to being older generation PCIe parts. We clamp these + * parts to ensure that no warning is displayed, as this could confuse + * users otherwise. + */ + expected_gts = txgbe_enumerate_functions(adapter) * 10; + + /* don't check link if we failed to enumerate functions */ + if (expected_gts > 0) + txgbe_check_minimum_link(adapter); + else + dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n"); + return 0; err_pci_release_regions: diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index b2e329f50bae..1d1ead3d3c06 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -4,15 +4,6 @@ #ifndef _TXGBE_TYPE_H_ #define _TXGBE_TYPE_H_ -#include -#include - -/************ txgbe_register.h ************/ -/* Vendor ID */ -#ifndef PCI_VENDOR_ID_WANGXUN -#define PCI_VENDOR_ID_WANGXUN 0x8088 -#endif - /* Device IDs */ #define TXGBE_DEV_ID_SP1000 0x1001 #define TXGBE_DEV_ID_WX1820 0x2001 @@ -54,4 +45,14 @@ /* Revision ID */ #define TXGBE_SP_MPW 1 +/**************** SP Registers ****************************/ +/* FMGR Registers */ +#define TXGBE_SPI_ILDR_STATUS 0x10120 +#define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */ +#define TXGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */ + +struct txgbe_hw { + struct wx_hw wxhw; +}; + #endif /* _TXGBE_TYPE_H_ */ From patchwork Fri Oct 21 02:07:19 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiawen Wu X-Patchwork-Id: 13014194 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0E754C43219 for ; Fri, 21 Oct 2022 01:57:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229902AbiJUB5L (ORCPT ); Thu, 20 Oct 2022 21:57:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59572 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229834AbiJUB5J (ORCPT ); Thu, 20 Oct 2022 21:57:09 -0400 Received: from smtpbgeu2.qq.com (smtpbgeu2.qq.com [18.194.254.142]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A4B0122D592 for ; Thu, 20 Oct 2022 18:57:02 -0700 (PDT) X-QQ-mid: bizesmtp66t1666317416t5yho9jb Received: from wxdbg.localdomain.com ( [183.129.236.74]) by bizesmtp.qq.com (ESMTP) with id ; Fri, 21 Oct 2022 09:56:55 +0800 (CST) X-QQ-SSF: 01400000000000H0V000000A0000000 X-QQ-FEAT: /XOqoV/ugIH18UNaghjaKfP3ZcL+EnUrBpHij+6kZTfyJATqVVYWqcf8QjBta 9af0lkM9C8lq78zu8UoPV5bqOOW4ET2Etj1I3+FOUHsKQTqD/VZj4EiUJvtsYk6P5G2Qp3D Wwhf0VJ/PQecvBdx8B85pKzFOEwodynn8i/2jgxvgtMAFuUaKpXnHRkTtTeSlfwNpd7iKV8 QPDHMWexkjlbcdm/HMZn/flTpVqP2JojnNLUZ7UHsaonjr/AQ/Eo15OOBjIDTzDsccjxBdc hnq5ajU/II/y8TOjeJqptvcM9SATBvGcqndLfSKY8mjbaCQr1lFC+PSi7jrI8M7elkOFVUb QpSdlhJCrTeB7efVJXNM/sBtDgyoR3Kw0eA9E7oc+2iYbT3NYX/whjtCXZpxw== X-QQ-GoodBg: 2 From: Jiawen Wu To: netdev@vger.kernel.org Cc: mengyuanlou@net-swift.com, Jiawen Wu Subject: [RESEND PATCH net-next v4 2/3] net: txgbe: Reset hardware Date: Fri, 21 Oct 2022 10:07:19 +0800 Message-Id: <20221021020720.519223-3-jiawenwu@trustnetic.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20221021020720.519223-1-jiawenwu@trustnetic.com> References: <20221021020720.519223-1-jiawenwu@trustnetic.com> MIME-Version: 1.0 X-QQ-SENDSIZE: 520 Feedback-ID: bizesmtp:trustnetic.com:qybglogicsvr:qybglogicsvr5 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Reset and initialize the hardware by configuring the MAC layer. Signed-off-by: Jiawen Wu --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 160 ++++++++++++++++++ drivers/net/ethernet/wangxun/libwx/wx_hw.h | 2 + drivers/net/ethernet/wangxun/libwx/wx_type.h | 146 ++++++++++++++++ drivers/net/ethernet/wangxun/txgbe/Makefile | 3 +- drivers/net/ethernet/wangxun/txgbe/txgbe.h | 5 +- drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 86 ++++++++++ drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h | 9 + .../net/ethernet/wangxun/txgbe/txgbe_main.c | 21 +++ .../net/ethernet/wangxun/txgbe/txgbe_type.h | 11 +- 9 files changed, 434 insertions(+), 9 deletions(-) create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index fed51c2f3071..76f88cfb2476 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -7,6 +7,21 @@ #include "wx_type.h" #include "wx_hw.h" +static void wx_intr_disable(struct wx_hw *wxhw, u64 qmask) +{ + u32 mask; + + mask = (qmask & 0xFFFFFFFF); + if (mask) + wr32(wxhw, WX_PX_IMS(0), mask); + + if (wxhw->mac.type == wx_mac_sp) { + mask = (qmask >> 32); + if (mask) + wr32(wxhw, WX_PX_IMS(1), mask); + } +} + /* cmd_addr is used for some special command: * 1. to be sector address, when implemented erase sector command * 2. to be flash address when implemented read, write flash address @@ -56,6 +71,151 @@ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit) } EXPORT_SYMBOL(wx_check_flash_load); +static void wx_disable_rx(struct wx_hw *wxhw) +{ + u32 pfdtxgswc; + u32 rxctrl; + + rxctrl = rd32(wxhw, WX_RDB_PB_CTL); + if (rxctrl & WX_RDB_PB_CTL_RXEN) { + pfdtxgswc = rd32(wxhw, WX_PSR_CTL); + if (pfdtxgswc & WX_PSR_CTL_SW_EN) { + pfdtxgswc &= ~WX_PSR_CTL_SW_EN; + wr32(wxhw, WX_PSR_CTL, pfdtxgswc); + wxhw->mac.set_lben = true; + } else { + wxhw->mac.set_lben = false; + } + rxctrl &= ~WX_RDB_PB_CTL_RXEN; + wr32(wxhw, WX_RDB_PB_CTL, rxctrl); + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) { + /* disable mac receiver */ + wr32m(wxhw, WX_MAC_RX_CFG, + WX_MAC_RX_CFG_RE, 0); + } + } +} + +/** + * wx_disable_pcie_master - Disable PCI-express master access + * @wxhw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +static int wx_disable_pcie_master(struct wx_hw *wxhw) +{ + int status = 0; + u32 val; + + /* Always set this bit to ensure any future transactions are blocked */ + pci_clear_master(wxhw->pdev); + + /* Exit if master requests are blocked */ + if (!(rd32(wxhw, WX_PX_TRANSACTION_PENDING))) + return 0; + + /* Poll for master request bit to clear */ + status = read_poll_timeout(rd32, val, !val, 100, WX_PCI_MASTER_DISABLE_TIMEOUT, + false, wxhw, WX_PX_TRANSACTION_PENDING); + if (status < 0) + wx_err(wxhw, "PCIe transaction pending bit did not clear.\n"); + + return status; +} + +/** + * wx_stop_adapter - Generic stop Tx/Rx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within wx_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +int wx_stop_adapter(struct wx_hw *wxhw) +{ + u16 i; + + /* Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + wxhw->adapter_stopped = true; + + /* Disable the receive unit */ + wx_disable_rx(wxhw); + + /* Set interrupt mask to stop interrupts from being generated */ + wx_intr_disable(wxhw, WX_INTR_ALL); + + /* Clear any pending interrupts, flush previous writes */ + wr32(wxhw, WX_PX_MISC_IC, 0xffffffff); + wr32(wxhw, WX_BME_CTL, 0x3); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < wxhw->mac.max_tx_queues; i++) { + wr32m(wxhw, WX_PX_TR_CFG(i), + WX_PX_TR_CFG_SWFLSH | WX_PX_TR_CFG_ENABLE, + WX_PX_TR_CFG_SWFLSH); + } + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < wxhw->mac.max_rx_queues; i++) { + wr32m(wxhw, WX_PX_RR_CFG(i), + WX_PX_RR_CFG_RR_EN, 0); + } + + /* flush all queues disables */ + WX_WRITE_FLUSH(wxhw); + + /* Prevent the PCI-E bus from hanging by disabling PCI-E master + * access and verify no pending requests + */ + return wx_disable_pcie_master(wxhw); +} +EXPORT_SYMBOL(wx_stop_adapter); + +void wx_reset_misc(struct wx_hw *wxhw) +{ + int i; + + /* receive packets that size > 2048 */ + wr32m(wxhw, WX_MAC_RX_CFG, WX_MAC_RX_CFG_JE, WX_MAC_RX_CFG_JE); + + /* clear counters on read */ + wr32m(wxhw, WX_MMC_CONTROL, + WX_MMC_CONTROL_RSTONRD, WX_MMC_CONTROL_RSTONRD); + + wr32m(wxhw, WX_MAC_RX_FLOW_CTRL, + WX_MAC_RX_FLOW_CTRL_RFE, WX_MAC_RX_FLOW_CTRL_RFE); + + wr32(wxhw, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR); + + wr32m(wxhw, WX_MIS_RST_ST, + WX_MIS_RST_ST_RST_INIT, 0x1E00); + + /* errata 4: initialize mng flex tbl and wakeup flex tbl*/ + wr32(wxhw, WX_PSR_MNG_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_MNG_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_MSK(i), 0); + } + wr32(wxhw, WX_PSR_LAN_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_LAN_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_MSK(i), 0); + } + + /* set pause frame dst mac addr */ + wr32(wxhw, WX_RDB_PFCMACDAL, 0xC2000001); + wr32(wxhw, WX_RDB_PFCMACDAH, 0x0180); +} +EXPORT_SYMBOL(wx_reset_misc); + int wx_sw_init(struct wx_hw *wxhw) { struct pci_dev *pdev = wxhw->pdev; diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h index 42e95283242c..2c4c4cbbfb46 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -5,6 +5,8 @@ #define _WX_HW_H_ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit); +int wx_stop_adapter(struct wx_hw *wxhw); +void wx_reset_misc(struct wx_hw *wxhw); int wx_sw_init(struct wx_hw *wxhw); #endif /* _WX_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index fa06443ca4f5..c720ad66f36c 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -9,6 +9,20 @@ #define PCI_VENDOR_ID_WANGXUN 0x8088 #endif +#define WX_NCSI_SUP 0x8000 +#define WX_NCSI_MASK 0x8000 +#define WX_WOL_SUP 0x4000 +#define WX_WOL_MASK 0x4000 + +/**************** Global Registers ****************************/ +/* chip control Registers */ +#define WX_MIS_PWR 0x10000 +#define WX_MIS_RST 0x1000C +#define WX_MIS_RST_LAN_RST(_i) BIT((_i) + 1) +#define WX_MIS_RST_ST 0x10030 +#define WX_MIS_RST_ST_RST_INI_SHIFT 8 +#define WX_MIS_RST_ST_RST_INIT (0xFF << WX_MIS_RST_ST_RST_INI_SHIFT) + /* FMGR Registers */ #define WX_SPI_CMD 0x10104 #define WX_SPI_CMD_READ_DWORD 0x1 @@ -25,16 +39,120 @@ #define WX_SPI_STATUS_FLASH_BYPASS BIT(31) #define WX_SPI_ILDR_STATUS 0x10120 +/* Sensors for PVT(Process Voltage Temperature) */ +#define WX_TS_EN 0x10304 +#define WX_TS_EN_ENA BIT(0) +#define WX_TS_ALARM_THRE 0x1030C +#define WX_TS_DALARM_THRE 0x10310 +#define WX_TS_INT_EN 0x10314 +#define WX_TS_INT_EN_DALARM_INT_EN BIT(1) +#define WX_TS_INT_EN_ALARM_INT_EN BIT(0) +#define WX_TS_ALARM_ST 0x10318 +#define WX_TS_ALARM_ST_DALARM BIT(1) +#define WX_TS_ALARM_ST_ALARM BIT(0) + +/***************************** RDB registers *********************************/ +/* receive packet buffer */ +#define WX_RDB_PB_CTL 0x19000 +#define WX_RDB_PB_CTL_RXEN BIT(31) /* Enable Receiver */ +#define WX_RDB_PB_CTL_DISABLED BIT(0) +/* statistic */ +#define WX_RDB_PFCMACDAL 0x19210 +#define WX_RDB_PFCMACDAH 0x19214 + +/******************************* PSR Registers *******************************/ +/* psr control */ +#define WX_PSR_CTL 0x15000 +/* Header split receive */ +#define WX_PSR_CTL_SW_EN BIT(18) +#define WX_PSR_CTL_RSC_ACK BIT(17) +#define WX_PSR_CTL_RSC_DIS BIT(16) +#define WX_PSR_CTL_PCSD BIT(13) +#define WX_PSR_CTL_IPPCSE BIT(12) +#define WX_PSR_CTL_BAM BIT(10) +#define WX_PSR_CTL_UPE BIT(9) +#define WX_PSR_CTL_MPE BIT(8) +#define WX_PSR_CTL_MFE BIT(7) +#define WX_PSR_CTL_MO_SHIFT 5 +#define WX_PSR_CTL_MO (0x3 << WX_PSR_CTL_MO_SHIFT) +#define WX_PSR_CTL_TPE BIT(4) + +/* Management */ +#define WX_PSR_MNG_FLEX_SEL 0x1582C +#define WX_PSR_MNG_FLEX_DW_L(_i) (0x15A00 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_DW_H(_i) (0x15A04 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_MSK(_i) (0x15A08 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_SEL 0x15B8C +#define WX_PSR_LAN_FLEX_DW_L(_i) (0x15C00 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16)) + +/************************************* ETH MAC *****************************/ +#define WX_MAC_RX_CFG 0x11004 +#define WX_MAC_RX_CFG_RE BIT(0) +#define WX_MAC_RX_CFG_JE BIT(8) +#define WX_MAC_PKT_FLT 0x11008 +#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */ +#define WX_MAC_RX_FLOW_CTRL 0x11090 +#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */ +#define WX_MMC_CONTROL 0x11800 +#define WX_MMC_CONTROL_RSTONRD BIT(2) /* reset on read */ + +/********************************* BAR registers ***************************/ +/* Interrupt Registers */ +#define WX_BME_CTL 0x12020 +#define WX_PX_MISC_IC 0x100 +#define WX_PX_IMS(_i) (0x140 + (_i) * 4) +#define WX_PX_TRANSACTION_PENDING 0x168 + +/* transmit DMA Registers */ +#define WX_PX_TR_CFG(_i) (0x03010 + ((_i) * 0x40)) +/* Transmit Config masks */ +#define WX_PX_TR_CFG_ENABLE BIT(0) /* Ena specific Tx Queue */ +#define WX_PX_TR_CFG_TR_SIZE_SHIFT 1 /* tx desc number per ring */ +#define WX_PX_TR_CFG_SWFLSH BIT(26) /* Tx Desc. wr-bk flushing */ +#define WX_PX_TR_CFG_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ +#define WX_PX_TR_CFG_THRE_SHIFT 8 + +/* Receive DMA Registers */ +#define WX_PX_RR_CFG(_i) (0x01010 + ((_i) * 0x40)) +/* PX_RR_CFG bit definitions */ +#define WX_PX_RR_CFG_RR_EN BIT(0) + +/* Number of 80 microseconds we wait for PCI Express master disable */ +#define WX_PCI_MASTER_DISABLE_TIMEOUT 80000 + /* Bus parameters */ struct wx_bus_info { u8 func; u16 device; }; +struct wx_thermal_sensor_data { + s16 temp; + s16 alarm_thresh; + s16 dalarm_thresh; +}; + +enum wx_mac_type { + wx_mac_unknown = 0, + wx_mac_sp, + wx_mac_em +}; + +struct wx_mac_info { + enum wx_mac_type type; + bool set_lben; + u32 max_tx_queues; + u32 max_rx_queues; + struct wx_thermal_sensor_data sensor; +}; + struct wx_hw { u8 __iomem *hw_addr; struct pci_dev *pdev; struct wx_bus_info bus; + struct wx_mac_info mac; u16 device_id; u16 vendor_id; u16 subsystem_device_id; @@ -42,14 +160,42 @@ struct wx_hw { u8 revision_id; u16 oem_ssid; u16 oem_svid; + bool adapter_stopped; }; +#define WX_INTR_ALL (~0ULL) + /** * register operations **/ #define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg))) #define rd32(a, reg) readl((a)->hw_addr + (reg)) +static inline u32 +rd32m(struct wx_hw *wxhw, u32 reg, u32 mask) +{ + u32 val; + + val = rd32(wxhw, reg); + return val & mask; +} + +static inline void +wr32m(struct wx_hw *wxhw, u32 reg, u32 mask, u32 field) +{ + u32 val; + + val = rd32(wxhw, reg); + val = ((val & ~mask) | (field & mask)); + + wr32(wxhw, reg, val); +} + +/* On some domestic CPU platforms, sometimes IO is not synchronized with + * flushing memory, here use readl() to flush PCI read and write. + */ +#define WX_WRITE_FLUSH(H) rd32(H, WX_MIS_PWR) + #define wx_err(wxhw, fmt, arg...) \ dev_err(&(wxhw)->pdev->dev, fmt, ##arg) diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile index 431303ca75b4..78484c58b78b 100644 --- a/drivers/net/ethernet/wangxun/txgbe/Makefile +++ b/drivers/net/ethernet/wangxun/txgbe/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_TXGBE) += txgbe.o -txgbe-objs := txgbe_main.o +txgbe-objs := txgbe_main.o \ + txgbe_hw.o diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h index 9a97b85be3ac..f866d7fa7161 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h @@ -4,13 +4,14 @@ #ifndef _TXGBE_H_ #define _TXGBE_H_ -#include "txgbe_type.h" - #define TXGBE_MAX_FDIR_INDICES 63 #define TXGBE_MAX_RX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) #define TXGBE_MAX_TX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) +#define TXGBE_SP_MAX_TX_QUEUES 128 +#define TXGBE_SP_MAX_RX_QUEUES 128 + /* board specific private data structure */ struct txgbe_adapter { u8 __iomem *io_addr; /* Mainly for iounmap use */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c new file mode 100644 index 000000000000..a679db3f2e41 --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include +#include +#include +#include + +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "txgbe_type.h" +#include "txgbe_hw.h" +#include "txgbe.h" + +/** + * txgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Inits the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +static void txgbe_init_thermal_sensor_thresh(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + struct wx_thermal_sensor_data *data = &wxhw->mac.sensor; + + memset(data, 0, sizeof(struct wx_thermal_sensor_data)); + + /* Only support thermal sensors attached to SP physical port 0 */ + if (wxhw->bus.func) + return; + + wr32(wxhw, TXGBE_TS_CTL, TXGBE_TS_CTL_EVAL_MD); + + wr32(wxhw, WX_TS_INT_EN, + WX_TS_INT_EN_ALARM_INT_EN | WX_TS_INT_EN_DALARM_INT_EN); + wr32(wxhw, WX_TS_EN, WX_TS_EN_ENA); + + data->alarm_thresh = 100; + wr32(wxhw, WX_TS_ALARM_THRE, 677); + data->dalarm_thresh = 90; + wr32(wxhw, WX_TS_DALARM_THRE, 614); +} + +static void txgbe_reset_misc(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + + wx_reset_misc(wxhw); + txgbe_init_thermal_sensor_thresh(hw); +} + +/** + * txgbe_reset_hw - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +int txgbe_reset_hw(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + u32 reset = 0; + int status; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = wx_stop_adapter(wxhw); + if (status != 0) + return status; + + reset = WX_MIS_RST_LAN_RST(wxhw->bus.func); + wr32(wxhw, WX_MIS_RST, reset | rd32(wxhw, WX_MIS_RST)); + + WX_WRITE_FLUSH(wxhw); + usleep_range(10, 100); + + status = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wxhw->bus.func)); + if (status != 0) + return status; + + txgbe_reset_misc(hw); + pci_set_master(wxhw->pdev); + + return 0; +} diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h new file mode 100644 index 000000000000..155f18ea4b8c --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _TXGBE_HW_H_ +#define _TXGBE_HW_H_ + +int txgbe_reset_hw(struct txgbe_hw *hw); + +#endif /* _TXGBE_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index 71ea197fe299..409103d5ac2b 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -11,6 +11,8 @@ #include "../libwx/wx_type.h" #include "../libwx/wx_hw.h" +#include "txgbe_type.h" +#include "txgbe_hw.h" #include "txgbe.h" char txgbe_driver_name[] = "txgbe"; @@ -92,6 +94,19 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter) return err; } + switch (wxhw->device_id) { + case TXGBE_DEV_ID_SP1000: + case TXGBE_DEV_ID_WX1820: + wxhw->mac.type = wx_mac_sp; + break; + default: + wxhw->mac.type = wx_mac_unknown; + break; + } + + wxhw->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES; + wxhw->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES; + return 0; } @@ -201,6 +216,12 @@ static int txgbe_probe(struct pci_dev *pdev, if (err) goto err_pci_release_regions; + err = txgbe_reset_hw(hw); + if (err) { + dev_err(&pdev->dev, "HW Init failed: %d\n", err); + goto err_pci_release_regions; + } + netdev->features |= NETIF_F_HIGHDMA; pci_set_drvdata(pdev, adapter); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index 1d1ead3d3c06..c891b0f07227 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -33,12 +33,6 @@ #define TXGBE_ID_WX1820_MAC_SGMII 0x2060 #define TXGBE_ID_MAC_SGMII 0x60 -#define TXGBE_NCSI_SUP 0x8000 -#define TXGBE_NCSI_MASK 0x8000 -#define TXGBE_WOL_SUP 0x4000 -#define TXGBE_WOL_MASK 0x4000 -#define TXGBE_DEV_MASK 0xf0 - /* Combined interface*/ #define TXGBE_ID_SFI_XAUI 0x50 @@ -50,6 +44,11 @@ #define TXGBE_SPI_ILDR_STATUS 0x10120 #define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */ #define TXGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */ +#define TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(_i) BIT((_i) + 9) /* lan soft reset done */ + +/* Sensors for PVT(Process Voltage Temperature) */ +#define TXGBE_TS_CTL 0x10300 +#define TXGBE_TS_CTL_EVAL_MD BIT(31) struct txgbe_hw { struct wx_hw wxhw; From patchwork Fri Oct 21 02:07:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiawen Wu X-Patchwork-Id: 13014193 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 66133C4332F for ; Fri, 21 Oct 2022 01:57:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229740AbiJUB5J (ORCPT ); Thu, 20 Oct 2022 21:57:09 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59550 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229604AbiJUB5I (ORCPT ); Thu, 20 Oct 2022 21:57:08 -0400 Received: from smtpbguseast1.qq.com (smtpbguseast1.qq.com [54.204.34.129]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 186B322B3B0 for ; Thu, 20 Oct 2022 18:57:04 -0700 (PDT) X-QQ-mid: bizesmtp66t1666317419t1nhh50w Received: from wxdbg.localdomain.com ( [183.129.236.74]) by bizesmtp.qq.com (ESMTP) with id ; Fri, 21 Oct 2022 09:56:58 +0800 (CST) X-QQ-SSF: 01400000000000H0V000000A0000000 X-QQ-FEAT: XBN7tc9DADJhclqn4O73mP1PcdXna1QFb6bRycRrSHCgM9ZcnBAJRmEub+OxZ p0WtpwAh0xSSdCRvgUVLS2NGwcQteuoLiJ9M0c7O95vOLzUxNwt+3bhVLosN8X1rNs8YYc5 plnH6Gn7sAoOQi/KZ4nNshOsoqazhAeID3C+rkzC68NDKtkbRH/gxi6BzKthTKQppK3cSh6 sKWtKydsMq69CstJkcjCxHJGBDlQhdmoo78ILgvu8/WSFqX6KdVlLp+KU53BkNDdjPBqP3R kdlBP5WQTkNP3FfJRYKWnaA7c5PGodUm14RZ+/tbXckOvGNZ+dlkBp/H27UNA3LU5GSEZcs mQnnV//yKTND5EHTu9GT0LfO0Y9yCbi/6gsFh0h98rK/RJyuYCp96xnalyj9ksgdCZmygaP X-QQ-GoodBg: 2 From: Jiawen Wu To: netdev@vger.kernel.org Cc: mengyuanlou@net-swift.com, Jiawen Wu Subject: [RESEND PATCH net-next v4 3/3] net: txgbe: Set MAC address and register netdev Date: Fri, 21 Oct 2022 10:07:20 +0800 Message-Id: <20221021020720.519223-4-jiawenwu@trustnetic.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20221021020720.519223-1-jiawenwu@trustnetic.com> References: <20221021020720.519223-1-jiawenwu@trustnetic.com> MIME-Version: 1.0 X-QQ-SENDSIZE: 520 Feedback-ID: bizesmtp:trustnetic.com:qybglogicsvr:qybglogicsvr5 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Add MAC address related operations, and register netdev. Signed-off-by: Jiawen Wu --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 233 ++++++++++++++- drivers/net/ethernet/wangxun/libwx/wx_hw.h | 6 + drivers/net/ethernet/wangxun/libwx/wx_type.h | 37 +++ drivers/net/ethernet/wangxun/txgbe/txgbe.h | 13 + drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 13 + .../net/ethernet/wangxun/txgbe/txgbe_main.c | 270 +++++++++++++++++- .../net/ethernet/wangxun/txgbe/txgbe_type.h | 3 + 7 files changed, 567 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index 76f88cfb2476..8dbbac862f27 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ +#include +#include #include #include @@ -71,7 +73,230 @@ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit) } EXPORT_SYMBOL(wx_check_flash_load); -static void wx_disable_rx(struct wx_hw *wxhw) +/** + * wx_get_mac_addr - Generic get MAC address + * @wxhw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +void wx_get_mac_addr(struct wx_hw *wxhw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + wr32(wxhw, WX_PSR_MAC_SWC_IDX, 0); + rar_high = rd32(wxhw, WX_PSR_MAC_SWC_AD_H); + rar_low = rd32(wxhw, WX_PSR_MAC_SWC_AD_L); + + for (i = 0; i < 2; i++) + mac_addr[i] = (u8)(rar_high >> (1 - i) * 8); + + for (i = 0; i < 4; i++) + mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8); +} +EXPORT_SYMBOL(wx_get_mac_addr); + +/** + * wx_set_rar - Set Rx address register + * @wxhw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @pools: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +int wx_set_rar(struct wx_hw *wxhw, u32 index, u8 *addr, u64 pools, + u32 enable_addr) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 rar_low, rar_high; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", index); + return -EINVAL; + } + + /* select the MAC address */ + wr32(wxhw, WX_PSR_MAC_SWC_IDX, index); + + /* setup VMDq pool mapping */ + wr32(wxhw, WX_PSR_MAC_SWC_VM_L, pools & 0xFFFFFFFF); + if (wxhw->mac.type == wx_mac_sp) + wr32(wxhw, WX_PSR_MAC_SWC_VM_H, pools >> 32); + + /* HW expects these in little endian so we reverse the byte + * order from network order (big endian) to little endian + * + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_low = ((u32)addr[5] | + ((u32)addr[4] << 8) | + ((u32)addr[3] << 16) | + ((u32)addr[2] << 24)); + rar_high = ((u32)addr[1] | + ((u32)addr[0] << 8)); + if (enable_addr != 0) + rar_high |= WX_PSR_MAC_SWC_AD_H_AV; + + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, rar_low); + wr32m(wxhw, WX_PSR_MAC_SWC_AD_H, + (WX_PSR_MAC_SWC_AD_H_AD(~0) | + WX_PSR_MAC_SWC_AD_H_ADTYPE(~0) | + WX_PSR_MAC_SWC_AD_H_AV), + rar_high); + + return 0; +} +EXPORT_SYMBOL(wx_set_rar); + +/** + * wx_clear_rar - Remove Rx address register + * @wxhw: pointer to hardware structure + * @index: Receive address register to write + * + * Clears an ethernet address from a receive address register. + **/ +int wx_clear_rar(struct wx_hw *wxhw, u32 index) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", index); + return -EINVAL; + } + + /* Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + wr32(wxhw, WX_PSR_MAC_SWC_IDX, index); + + wr32(wxhw, WX_PSR_MAC_SWC_VM_L, 0); + wr32(wxhw, WX_PSR_MAC_SWC_VM_H, 0); + + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, 0); + wr32m(wxhw, WX_PSR_MAC_SWC_AD_H, + (WX_PSR_MAC_SWC_AD_H_AD(~0) | + WX_PSR_MAC_SWC_AD_H_ADTYPE(~0) | + WX_PSR_MAC_SWC_AD_H_AV), + 0); + + return 0; +} +EXPORT_SYMBOL(wx_clear_rar); + +/** + * wx_clear_vmdq - Disassociate a VMDq pool index from a rx address + * @wxhw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +static int wx_clear_vmdq(struct wx_hw *wxhw, u32 rar, u32 __maybe_unused vmdq) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 mpsar_lo, mpsar_hi; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", rar); + return -EINVAL; + } + + wr32(wxhw, WX_PSR_MAC_SWC_IDX, rar); + mpsar_lo = rd32(wxhw, WX_PSR_MAC_SWC_VM_L); + mpsar_hi = rd32(wxhw, WX_PSR_MAC_SWC_VM_H); + + if (!mpsar_lo && !mpsar_hi) + return 0; + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + wx_clear_rar(wxhw, rar); + + return 0; +} + +/** + * wx_init_uta_tables - Initialize the Unicast Table Array + * @wxhw: pointer to hardware structure + **/ +static void wx_init_uta_tables(struct wx_hw *wxhw) +{ + int i; + + wx_dbg(wxhw, " Clearing UTA\n"); + + for (i = 0; i < 128; i++) + wr32(wxhw, WX_PSR_UC_TBL(i), 0); +} + +/** + * wx_init_rx_addrs - Initializes receive address filters. + * @wxhw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +void wx_init_rx_addrs(struct wx_hw *wxhw) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 psrctl; + int i; + + /* If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (!is_valid_ether_addr(wxhw->mac.addr)) { + /* Get the MAC address from the RAR0 for later reference */ + wx_get_mac_addr(wxhw, wxhw->mac.addr); + wx_dbg(wxhw, "Keeping Current RAR0 Addr = %pM\n", wxhw->mac.addr); + } else { + /* Setup the receive address. */ + wx_dbg(wxhw, "Overriding MAC Address in RAR[0]\n"); + wx_dbg(wxhw, "New MAC Addr = %pM\n", wxhw->mac.addr); + + wx_set_rar(wxhw, 0, wxhw->mac.addr, 0, WX_PSR_MAC_SWC_AD_H_AV); + + if (wxhw->mac.type == wx_mac_sp) { + /* clear VMDq pool/queue selection for RAR 0 */ + wx_clear_vmdq(wxhw, 0, WX_CLEAR_VMDQ_ALL); + } + } + + /* Zero out the other receive addresses. */ + wx_dbg(wxhw, "Clearing RAR[1-%d]\n", rar_entries - 1); + for (i = 1; i < rar_entries; i++) { + wr32(wxhw, WX_PSR_MAC_SWC_IDX, i); + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, 0); + wr32(wxhw, WX_PSR_MAC_SWC_AD_H, 0); + } + + /* Clear the MTA */ + wxhw->addr_ctrl.mta_in_use = 0; + psrctl = rd32(wxhw, WX_PSR_CTL); + psrctl &= ~(WX_PSR_CTL_MO | WX_PSR_CTL_MFE); + psrctl |= wxhw->mac.mc_filter_type << WX_PSR_CTL_MO_SHIFT; + wr32(wxhw, WX_PSR_CTL, psrctl); + wx_dbg(wxhw, " Clearing MTA\n"); + for (i = 0; i < wxhw->mac.mcft_size; i++) + wr32(wxhw, WX_PSR_MC_TBL(i), 0); + + wx_init_uta_tables(wxhw); +} +EXPORT_SYMBOL(wx_init_rx_addrs); + +void wx_disable_rx(struct wx_hw *wxhw) { u32 pfdtxgswc; u32 rxctrl; @@ -97,6 +322,7 @@ static void wx_disable_rx(struct wx_hw *wxhw) } } } +EXPORT_SYMBOL(wx_disable_rx); /** * wx_disable_pcie_master - Disable PCI-express master access @@ -105,7 +331,7 @@ static void wx_disable_rx(struct wx_hw *wxhw) * Disables PCI-Express master access and verifies there are no pending * requests. **/ -static int wx_disable_pcie_master(struct wx_hw *wxhw) +int wx_disable_pcie_master(struct wx_hw *wxhw) { int status = 0; u32 val; @@ -125,10 +351,11 @@ static int wx_disable_pcie_master(struct wx_hw *wxhw) return status; } +EXPORT_SYMBOL(wx_disable_pcie_master); /** * wx_stop_adapter - Generic stop Tx/Rx units - * @hw: pointer to hardware structure + * @wxhw: pointer to hardware structure * * Sets the adapter_stopped flag within wx_hw struct. Clears interrupts, * disables transmit and receive units. The adapter_stopped flag is used by diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h index 2c4c4cbbfb46..58a943dc76c1 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -5,6 +5,12 @@ #define _WX_HW_H_ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit); +void wx_get_mac_addr(struct wx_hw *wxhw, u8 *mac_addr); +int wx_set_rar(struct wx_hw *wxhw, u32 index, u8 *addr, u64 pools, u32 enable_addr); +int wx_clear_rar(struct wx_hw *wxhw, u32 index); +void wx_init_rx_addrs(struct wx_hw *wxhw); +void wx_disable_rx(struct wx_hw *wxhw); +int wx_disable_pcie_master(struct wx_hw *wxhw); int wx_stop_adapter(struct wx_hw *wxhw); void wx_reset_misc(struct wx_hw *wxhw); int wx_sw_init(struct wx_hw *wxhw); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index c720ad66f36c..a84ff4586013 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -51,6 +51,12 @@ #define WX_TS_ALARM_ST_DALARM BIT(1) #define WX_TS_ALARM_ST_ALARM BIT(0) +/*********************** Transmit DMA registers **************************/ +/* transmit global control */ +#define WX_TDM_CTL 0x18000 +/* TDM CTL BIT */ +#define WX_TDM_CTL_TE BIT(0) /* Transmit Enable */ + /***************************** RDB registers *********************************/ /* receive packet buffer */ #define WX_RDB_PB_CTL 0x19000 @@ -76,6 +82,9 @@ #define WX_PSR_CTL_MO_SHIFT 5 #define WX_PSR_CTL_MO (0x3 << WX_PSR_CTL_MO_SHIFT) #define WX_PSR_CTL_TPE BIT(4) +/* mcasst/ucast overflow tbl */ +#define WX_PSR_MC_TBL(_i) (0x15200 + ((_i) * 4)) +#define WX_PSR_UC_TBL(_i) (0x15400 + ((_i) * 4)) /* Management */ #define WX_PSR_MNG_FLEX_SEL 0x1582C @@ -87,7 +96,20 @@ #define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16)) #define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16)) +/* mac switcher */ +#define WX_PSR_MAC_SWC_AD_L 0x16200 +#define WX_PSR_MAC_SWC_AD_H 0x16204 +#define WX_PSR_MAC_SWC_AD_H_AD(v) (((v) & 0xFFFF)) +#define WX_PSR_MAC_SWC_AD_H_ADTYPE(v) (((v) & 0x1) << 30) +#define WX_PSR_MAC_SWC_AD_H_AV BIT(31) +#define WX_PSR_MAC_SWC_VM_L 0x16208 +#define WX_PSR_MAC_SWC_VM_H 0x1620C +#define WX_PSR_MAC_SWC_IDX 0x16210 +#define WX_CLEAR_VMDQ_ALL 0xFFFFFFFFU + /************************************* ETH MAC *****************************/ +#define WX_MAC_TX_CFG 0x11000 +#define WX_MAC_TX_CFG_TE BIT(0) #define WX_MAC_RX_CFG 0x11004 #define WX_MAC_RX_CFG_RE BIT(0) #define WX_MAC_RX_CFG_JE BIT(8) @@ -143,16 +165,28 @@ enum wx_mac_type { struct wx_mac_info { enum wx_mac_type type; bool set_lben; + u8 addr[ETH_ALEN]; + u8 perm_addr[ETH_ALEN]; + s32 mc_filter_type; + u32 mcft_size; + u32 num_rar_entries; u32 max_tx_queues; u32 max_rx_queues; struct wx_thermal_sensor_data sensor; }; +struct wx_addr_filter_info { + u32 num_mc_addrs; + u32 mta_in_use; + bool user_set_promisc; +}; + struct wx_hw { u8 __iomem *hw_addr; struct pci_dev *pdev; struct wx_bus_info bus; struct wx_mac_info mac; + struct wx_addr_filter_info addr_ctrl; u16 device_id; u16 vendor_id; u16 subsystem_device_id; @@ -199,4 +233,7 @@ wr32m(struct wx_hw *wxhw, u32 reg, u32 mask, u32 field) #define wx_err(wxhw, fmt, arg...) \ dev_err(&(wxhw)->pdev->dev, fmt, ##arg) +#define wx_dbg(wxhw, fmt, arg...) \ + dev_dbg(&(wxhw)->pdev->dev, fmt, ##arg) + #endif /* _WX_TYPE_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h index f866d7fa7161..52e350f9a7d9 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h @@ -11,6 +11,18 @@ #define TXGBE_SP_MAX_TX_QUEUES 128 #define TXGBE_SP_MAX_RX_QUEUES 128 +#define TXGBE_SP_RAR_ENTRIES 128 +#define TXGBE_SP_MC_TBL_SIZE 128 + +struct txgbe_mac_addr { + u8 addr[ETH_ALEN]; + u16 state; /* bitmask */ + u64 pools; +}; + +#define TXGBE_MAC_STATE_DEFAULT 0x1 +#define TXGBE_MAC_STATE_MODIFIED 0x2 +#define TXGBE_MAC_STATE_IN_USE 0x4 /* board specific private data structure */ struct txgbe_adapter { @@ -22,6 +34,7 @@ struct txgbe_adapter { /* structs defined in txgbe_type.h */ struct txgbe_hw hw; u16 msg_enable; + struct txgbe_mac_addr *mac_table; }; extern char txgbe_driver_name[]; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c index a679db3f2e41..c7c92c0ec561 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ +#include +#include #include #include #include @@ -80,6 +82,17 @@ int txgbe_reset_hw(struct txgbe_hw *hw) return status; txgbe_reset_misc(hw); + + /* Store the permanent mac address */ + wx_get_mac_addr(wxhw, wxhw->mac.perm_addr); + + /* Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + wxhw->mac.num_rar_entries = TXGBE_SP_RAR_ENTRIES; + wx_init_rx_addrs(wxhw); + pci_set_master(wxhw->pdev); return 0; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index 409103d5ac2b..adfa4e7d0d52 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "../libwx/wx_type.h" #include "../libwx/wx_hw.h" @@ -72,6 +73,143 @@ static int txgbe_enumerate_functions(struct txgbe_adapter *adapter) return physfns; } +static void txgbe_sync_mac_table(struct txgbe_adapter *adapter) +{ + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + int i; + + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state & TXGBE_MAC_STATE_MODIFIED) { + if (adapter->mac_table[i].state & TXGBE_MAC_STATE_IN_USE) { + wx_set_rar(wxhw, i, + adapter->mac_table[i].addr, + adapter->mac_table[i].pools, + WX_PSR_MAC_SWC_AD_H_AV); + } else { + wx_clear_rar(wxhw, i); + } + adapter->mac_table[i].state &= ~(TXGBE_MAC_STATE_MODIFIED); + } + } +} + +/* this function destroys the first RAR entry */ +static void txgbe_mac_set_default_filter(struct txgbe_adapter *adapter, + u8 *addr) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + + memcpy(&adapter->mac_table[0].addr, addr, ETH_ALEN); + adapter->mac_table[0].pools = 1ULL; + adapter->mac_table[0].state = (TXGBE_MAC_STATE_DEFAULT | + TXGBE_MAC_STATE_IN_USE); + wx_set_rar(wxhw, 0, adapter->mac_table[0].addr, + adapter->mac_table[0].pools, + WX_PSR_MAC_SWC_AD_H_AV); +} + +static void txgbe_flush_sw_mac_table(struct txgbe_adapter *adapter) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + u32 i; + + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].pools = 0; + } + txgbe_sync_mac_table(adapter); +} + +static int txgbe_del_mac_filter(struct txgbe_adapter *adapter, u8 *addr, u16 pool) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + u32 i; + + if (is_zero_ether_addr(addr)) + return -EINVAL; + + /* search table for addr, if found, set to 0 and sync */ + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + if (ether_addr_equal(addr, adapter->mac_table[i].addr)) { + if (adapter->mac_table[i].pools & (1ULL << pool)) { + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + adapter->mac_table[i].pools &= ~(1ULL << pool); + txgbe_sync_mac_table(adapter); + } + return 0; + } + + if (adapter->mac_table[i].pools != (1 << pool)) + continue; + if (!ether_addr_equal(addr, adapter->mac_table[i].addr)) + continue; + + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].pools = 0; + txgbe_sync_mac_table(adapter); + return 0; + } + return -ENOMEM; +} + +static void txgbe_reset(struct txgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct txgbe_hw *hw = &adapter->hw; + u8 old_addr[ETH_ALEN]; + int err; + + err = txgbe_reset_hw(hw); + if (err != 0) + dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err); + + /* do not flush user set addresses */ + memcpy(old_addr, &adapter->mac_table[0].addr, netdev->addr_len); + txgbe_flush_sw_mac_table(adapter); + txgbe_mac_set_default_filter(adapter, old_addr); +} + +static void txgbe_disable_device(struct txgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct wx_hw *wxhw = &adapter->hw.wxhw; + + wx_disable_pcie_master(wxhw); + /* disable receives */ + wx_disable_rx(wxhw); + + netif_carrier_off(netdev); + netif_tx_disable(netdev); + + if (wxhw->bus.func < 2) + wr32m(wxhw, TXGBE_MIS_PRB_CTL, TXGBE_MIS_PRB_CTL_LAN_UP(wxhw->bus.func), 0); + else + dev_err(&adapter->pdev->dev, + "%s: invalid bus lan id %d\n", + __func__, wxhw->bus.func); + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) { + /* disable mac transmiter */ + wr32m(wxhw, WX_MAC_TX_CFG, WX_MAC_TX_CFG_TE, 0); + } + + /* Disable the Tx DMA engine */ + wr32m(wxhw, WX_TDM_CTL, WX_TDM_CTL_TE, 0); +} + +static void txgbe_down(struct txgbe_adapter *adapter) +{ + txgbe_disable_device(adapter); + txgbe_reset(adapter); +} + /** * txgbe_sw_init - Initialize general software structures (struct txgbe_adapter) * @adapter: board private structure to initialize @@ -104,8 +242,65 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter) break; } + wxhw->mac.num_rar_entries = TXGBE_SP_RAR_ENTRIES; wxhw->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES; wxhw->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES; + wxhw->mac.mcft_size = TXGBE_SP_MC_TBL_SIZE; + + adapter->mac_table = kcalloc(wxhw->mac.num_rar_entries, + sizeof(struct txgbe_mac_addr), + GFP_KERNEL); + if (!adapter->mac_table) { + netif_err(adapter, probe, adapter->netdev, + "mac_table allocation failed\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * txgbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). + **/ +static int txgbe_open(struct net_device *netdev) +{ + return 0; +} + +/** + * txgbe_close_suspend - actions necessary to both suspend and close flows + * @adapter: the private adapter struct + * + * This function should contain the necessary work common to both suspending + * and closing of the device. + */ +static void txgbe_close_suspend(struct txgbe_adapter *adapter) +{ + txgbe_disable_device(adapter); +} + +/** + * txgbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int txgbe_close(struct net_device *netdev) +{ + struct txgbe_adapter *adapter = netdev_priv(netdev); + + txgbe_down(adapter); return 0; } @@ -117,6 +312,11 @@ static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); + rtnl_lock(); + if (netif_running(netdev)) + txgbe_close_suspend(adapter); + rtnl_unlock(); + pci_disable_device(pdev); } @@ -132,6 +332,47 @@ static void txgbe_shutdown(struct pci_dev *pdev) } } +static netdev_tx_t txgbe_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + return NETDEV_TX_OK; +} + +/** + * txgbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int txgbe_set_mac(struct net_device *netdev, void *p) +{ + struct txgbe_adapter *adapter = netdev_priv(netdev); + struct wx_hw *wxhw = &adapter->hw.wxhw; + struct sockaddr *addr = p; + int retval; + + retval = eth_prepare_mac_addr_change(netdev, addr); + if (retval) + return retval; + + txgbe_del_mac_filter(adapter, wxhw->mac.addr, 0); + eth_hw_addr_set(netdev, addr->sa_data); + memcpy(wxhw->mac.addr, addr->sa_data, netdev->addr_len); + + txgbe_mac_set_default_filter(adapter, wxhw->mac.addr); + + return 0; +} + +static const struct net_device_ops txgbe_netdev_ops = { + .ndo_open = txgbe_open, + .ndo_stop = txgbe_close, + .ndo_start_xmit = txgbe_xmit_frame, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = txgbe_set_mac, +}; + /** * txgbe_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -201,29 +442,36 @@ static int txgbe_probe(struct pci_dev *pdev, goto err_pci_release_regions; } - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + netdev->netdev_ops = &txgbe_netdev_ops; /* setup the private structure */ err = txgbe_sw_init(adapter); if (err) - goto err_pci_release_regions; + goto err_free_mac_table; /* check if flash load is done after hw power up */ err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PERST); if (err) - goto err_pci_release_regions; + goto err_free_mac_table; err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PWRRST); if (err) - goto err_pci_release_regions; + goto err_free_mac_table; err = txgbe_reset_hw(hw); if (err) { dev_err(&pdev->dev, "HW Init failed: %d\n", err); - goto err_pci_release_regions; + goto err_free_mac_table; } netdev->features |= NETIF_F_HIGHDMA; + eth_hw_addr_set(netdev, wxhw->mac.perm_addr); + txgbe_mac_set_default_filter(adapter, wxhw->mac.perm_addr); + + err = register_netdev(netdev); + if (err) + goto err_free_mac_table; + pci_set_drvdata(pdev, adapter); /* calculate the expected PCIe bandwidth required for optimal @@ -240,8 +488,12 @@ static int txgbe_probe(struct pci_dev *pdev, else dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n"); + netif_info(adapter, probe, netdev, "%pM\n", netdev->dev_addr); + return 0; +err_free_mac_table: + kfree(adapter->mac_table); err_pci_release_regions: pci_disable_pcie_error_reporting(pdev); pci_release_selected_regions(pdev, @@ -262,9 +514,17 @@ static int txgbe_probe(struct pci_dev *pdev, **/ static void txgbe_remove(struct pci_dev *pdev) { + struct txgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev; + + netdev = adapter->netdev; + unregister_netdev(netdev); + pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); + kfree(adapter->mac_table); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index c891b0f07227..4082d3b76709 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -40,6 +40,9 @@ #define TXGBE_SP_MPW 1 /**************** SP Registers ****************************/ +/* chip control Registers */ +#define TXGBE_MIS_PRB_CTL 0x10010 +#define TXGBE_MIS_PRB_CTL_LAN_UP(_i) BIT(1 - (_i)) /* FMGR Registers */ #define TXGBE_SPI_ILDR_STATUS 0x10120 #define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */