From patchwork Mon Jan 9 09:14:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ki-Seok Jo X-Patchwork-Id: 13093174 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 5BB1EC54EBD for ; Mon, 9 Jan 2023 09:15:40 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 04E5F81C1; Mon, 9 Jan 2023 10:14:48 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 04E5F81C1 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1673255738; bh=/8N43gxJMaGpFOaUVjRmlEGUFu/berkndi4nK4NEYug=; h=From:To:Subject:Date:List-Id:List-Unsubscribe:List-Archive: List-Post:List-Help:List-Subscribe:Cc:From; b=PGKzmXujeXfoHm3AHSIUFJt5wrSjtIM62UF9LMLi1vVJMEy0OVusE9d/sXa3t06da LCgUehjNFtC5cUCV1NxBfefK5ntkqTQPW3f+PCr1DCayzuOZ0gCY8obN6vPsq9R//P VJymRBo47/iv6FjNgmw9smNBE2qKW6gFr3I2GiS0= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id AF452F8026A; Mon, 9 Jan 2023 10:14:47 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 1E8F1F803DC; Mon, 9 Jan 2023 10:14:46 +0100 (CET) Received: from KOR01-PS2-obe.outbound.protection.outlook.com (mail-ps2kor01on2070.outbound.protection.outlook.com [40.107.128.70]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 2AD13F800C7 for ; Mon, 9 Jan 2023 10:14:39 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 2AD13F800C7 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=byjCt1kODV9I+MlSml9qZNP6kySNpZBhUomWdlpSOzk4oPr4DxxBiuZ5984C+jOMgekdrnc8z7rgJojHF3iaPTqh7T4nEei/WsIE7onqsBRAb5bp6dalhAq4dMD12r6P0ytW3V30C9kFeQe4teUlaz8/c83acePFGd6QECEVQlajtc+xzYCUtBwIzT4hgngAwxVmwdS4bs8VXkwbAjaSms0vn23HJLI/uH1e9yiSgb7//8JFIvn9J08pixn3n8yiFbnjdI3DdMTzsEV2HzmmxcpLcxZHnYOiFT5RAodjsPk2wODR62pinJKa5kiL5B/PQEV271MlND4zy/wLWi5YQQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=sZga3mCdELs3rJ4p5OWnaBOpQbWN3M7/TfcwK4LBs+U=; b=Z88ogpRfr4TrEinUkPyNluA2e6lWQniFAN2mJBrSCPSWL89TFM7HPHgTlvRKE/kcR6gZtivk3eykA361LwElJXuVFS1DNJvAoP4STeXMbglRt0PtFbEctgFa5GiVJyaNRrREm4WJ/eWCHYw7L9WnJDMHJNoSERORXYq/JzZJ+4kA/Fl3NXfaz0hKphAQkRXdXNgDYZ3SYfiV+Ho7ILhSLU0GIegIulRLrN1+F40XhSbPBGUgpKIKbPsKkr9ITR92WSV4+FEFKxBZUrbDOH9lZvgCqr9i/B8yuKbS5D5fJHrBxO1I28gGz6j4v6BqmkGr4TtBvjLHO91C79q4thn5fw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=irondevice.com; dmarc=pass action=none header.from=irondevice.com; dkim=pass header.d=irondevice.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=irondevice.com; Received: from SLXP216MB0077.KORP216.PROD.OUTLOOK.COM (2603:1096:100:7::23) by SLXP216MB0800.KORP216.PROD.OUTLOOK.COM (2603:1096:100:12::18) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5944.19; Mon, 9 Jan 2023 09:14:32 +0000 Received: from SLXP216MB0077.KORP216.PROD.OUTLOOK.COM ([fe80::3d9:7f82:fa73:e727]) by SLXP216MB0077.KORP216.PROD.OUTLOOK.COM ([fe80::3d9:7f82:fa73:e727%7]) with mapi id 15.20.5986.018; Mon, 9 Jan 2023 09:14:32 +0000 From: Kiseok Jo To: Mark Brown Subject: [PATCH v2 1/2] ASoC: sma1303: Add driver for Iron Device SMA1303 Amp Date: Mon, 9 Jan 2023 18:14:01 +0900 Message-Id: <20230109091402.11790-3-kiseok.jo@irondevice.com> X-Mailer: git-send-email 2.30.2 X-ClientProxiedBy: SL2P216CA0115.KORP216.PROD.OUTLOOK.COM (2603:1096:101::12) To SLXP216MB0077.KORP216.PROD.OUTLOOK.COM (2603:1096:100:7::23) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SLXP216MB0077:EE_|SLXP216MB0800:EE_ X-MS-Office365-Filtering-Correlation-Id: 6bef7082-a9ce-4f9f-5a8d-08daf221ea96 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SLXP216MB0077.KORP216.PROD.OUTLOOK.COM; PTR:; CAT:NONE; SFS:(13230022)(376002)(136003)(39830400003)(346002)(396003)(366004)(451199015)(1076003)(83380400001)(6512007)(26005)(6666004)(107886003)(6506007)(86362001)(36756003)(38100700002)(186003)(2616005)(38350700002)(41300700001)(478600001)(316002)(8676002)(4326008)(2906002)(5660300002)(8936002)(30864003)(44832011)(52116002)(6486002)(66476007)(6916009)(66556008)(66946007)(559001)(579004); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: irondevice.com X-MS-Exchange-CrossTenant-Network-Message-Id: 6bef7082-a9ce-4f9f-5a8d-08daf221ea96 X-MS-Exchange-CrossTenant-AuthSource: SLXP216MB0077.KORP216.PROD.OUTLOOK.COM X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 09 Jan 2023 09:14:32.0222 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: b4849faa-3337-494e-a76a-cb25a3b3d7d1 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: fRnJaZ2tIXOLiCabtgnmUJpKcDZk2haLszThx2+YWYj5YzFabjzSDzL3AXeKCV3O20hiTo6Q6WCWTFbzmqNP/122MRqkJSfmnHHJGL/zDtE= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SLXP216MB0800 X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: alsa-devel@alsa-project.org, application@irondevice.com, Kiseok Jo Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" The Iron Device SMA1303 is a boosted Class-D audio amplifier. Signed-off-by: Kiseok Jo --- v2: Modified to match kernel coding style. --- sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1303.c | 1746 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/sma1303.h | 616 +++++++++++++ 4 files changed, 2371 insertions(+) create mode 100644 sound/soc/codecs/sma1303.c create mode 100644 sound/soc/codecs/sma1303.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0f9d71490075..83d2981a400e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -206,6 +206,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_SI476X imply SND_SOC_SIMPLE_AMPLIFIER imply SND_SOC_SIMPLE_MUX + imply SND_SOC_SMA1303 imply SND_SOC_SPDIF imply SND_SOC_SRC4XXX_I2C imply SND_SOC_SSM2305 @@ -1492,6 +1493,12 @@ config SND_SOC_SIMPLE_MUX tristate "Simple Audio Mux" depends on GPIOLIB +config SND_SOC_SMA1303 + tristate "Iron Device SMA1303 Audio Amplifier" + depends on I2C + help + Enable support for Iron Device SMA1303 Boosted Class-D amplifier + config SND_SOC_SPDIF tristate "S/PDIF CODEC" diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 71d3ce5867e4..89ffd06e9290 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -233,6 +233,7 @@ snd-soc-sigmadsp-objs := sigmadsp.o snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o snd-soc-si476x-objs := si476x.o +snd-soc-sma1303-objs := sma1303.o snd-soc-spdif-tx-objs := spdif_transmitter.o snd-soc-spdif-rx-objs := spdif_receiver.o snd-soc-src4xxx-objs := src4xxx.o @@ -588,6 +589,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o +obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o diff --git a/sound/soc/codecs/sma1303.c b/sound/soc/codecs/sma1303.c new file mode 100644 index 000000000000..4b6d8b083340 --- /dev/null +++ b/sound/soc/codecs/sma1303.c @@ -0,0 +1,1746 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// sma1303.c -- sma1303 ALSA SoC Audio driver +// +// Copyright 2023 Iron Device Corporation +// +// Auther: Gyuhwa Park +// Kiseok Jo + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sma1303.h" + +#define CHECK_PERIOD_TIME 1 /* sec per HZ */ +#define MAX_CONTROL_NAME 48 + +#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\ + _post_n, _n, _vco, _p_cp)\ +{\ + .input_clk_name = _input_clk_name,\ + .output_clk_name = _output_clk_name,\ + .input_clk = _input_clk,\ + .post_n = _post_n,\ + .n = _n,\ + .vco = _vco,\ + .p_cp = _p_cp,\ +} + +enum sma1303_type { + SMA1303, +}; + +struct callback_ops gCallback; + +struct sma1303_pll_match { + char *input_clk_name; + char *output_clk_name; + unsigned int input_clk; + unsigned int post_n; + unsigned int n; + unsigned int vco; + unsigned int p_cp; +}; + +struct sma1303_priv { + enum sma1303_type devtype; + struct attribute_group *attr_grp; + struct delayed_work check_fault_work; + struct device *dev; + struct kobject *kobj; + struct mutex lock; + struct regmap *regmap; + struct sma1303_pll_match *pll_matches; + bool amp_power_status; + bool force_mute_status; + int num_of_pll_matches; + int retry_cnt; + unsigned int amp_mode; + unsigned int cur_vol; + unsigned int format; + unsigned int frame_size; + unsigned int init_vol; + unsigned int last_bclk; + unsigned int last_ocp_val; + unsigned int last_over_temp; + unsigned int rev_num; + unsigned int sys_clk_id; + unsigned int tdm_slot_rx; + unsigned int tdm_slot_tx; + unsigned int tsdw_cnt; + long check_fault_period; + long check_fault_status; +}; + +static struct snd_kcontrol_new *sma1303_controls; + +static struct sma1303_pll_match sma1303_pll_matches[] = { +PLL_MATCH("1.411MHz", "24.595MHz", 1411200, 0x07, 0xF4, 0x8B, 0x03), +PLL_MATCH("1.536MHz", "24.576MHz", 1536000, 0x07, 0xE0, 0x8B, 0x03), +PLL_MATCH("3.072MHz", "24.576MHz", 3072000, 0x07, 0x70, 0x8B, 0x03), +PLL_MATCH("6.144MHz", "24.576MHz", 6144000, 0x07, 0x70, 0x8B, 0x07), +PLL_MATCH("12.288MHz", "24.576MHz", 12288000, 0x07, 0x70, 0x8B, 0x0B), +PLL_MATCH("19.2MHz", "24.343MHz", 19200000, 0x07, 0x47, 0x8B, 0x0A), +PLL_MATCH("24.576MHz", "24.576MHz", 24576000, 0x07, 0x70, 0x8B, 0x0F), +}; + +static int sma1303_startup(struct snd_soc_component *); +static int sma1303_shutdown(struct snd_soc_component *); + +static const struct reg_default sma1303_reg_def[] = { + { 0x00, 0x80 }, + { 0x01, 0x00 }, + { 0x02, 0x00 }, + { 0x03, 0x11 }, + { 0x04, 0x17 }, + { 0x09, 0x00 }, + { 0x0A, 0x31 }, + { 0x0B, 0x98 }, + { 0x0C, 0x84 }, + { 0x0D, 0x07 }, + { 0x0E, 0x3F }, + { 0x10, 0x00 }, + { 0x11, 0x00 }, + { 0x12, 0x00 }, + { 0x14, 0x5C }, + { 0x15, 0x01 }, + { 0x16, 0x0F }, + { 0x17, 0x0F }, + { 0x18, 0x0F }, + { 0x19, 0x00 }, + { 0x1A, 0x00 }, + { 0x1B, 0x00 }, + { 0x23, 0x19 }, + { 0x24, 0x00 }, + { 0x25, 0x00 }, + { 0x26, 0x04 }, + { 0x33, 0x00 }, + { 0x36, 0x92 }, + { 0x37, 0x27 }, + { 0x3B, 0x5A }, + { 0x3C, 0x20 }, + { 0x3D, 0x00 }, + { 0x3E, 0x03 }, + { 0x3F, 0x0C }, + { 0x8B, 0x07 }, + { 0x8C, 0x70 }, + { 0x8D, 0x8B }, + { 0x8E, 0x6F }, + { 0x8F, 0x03 }, + { 0x90, 0x26 }, + { 0x91, 0x42 }, + { 0x92, 0xE0 }, + { 0x94, 0x35 }, + { 0x95, 0x0C }, + { 0x96, 0x42 }, + { 0x97, 0x95 }, + { 0xA0, 0x00 }, + { 0xA1, 0x3B }, + { 0xA2, 0xC8 }, + { 0xA3, 0x28 }, + { 0xA4, 0x40 }, + { 0xA5, 0x01 }, + { 0xA6, 0x41 }, + { 0xA7, 0x00 }, +}; + +static bool sma1303_readable_register(struct device *dev, unsigned int reg) +{ + bool result; + + if (reg > SMA1303_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4: + case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL: + case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3: + case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7: + case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4: + case SMA1303_33_SDM_CTRL ... SMA1303_34_OTP_DATA1: + case SMA1303_36_PROTECTION ... SMA1303_38_OTP_TRM0: + case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2: + case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL: + case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4: + case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON: + case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2: + result = true; + break; + case SMA1303_FF_DEVICE_INDEX: + result = true; + break; + default: + result = false; + } + return result; +} + +static bool sma1303_writeable_register(struct device *dev, unsigned int reg) +{ + bool result; + + if (reg > SMA1303_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4: + case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL: + case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3: + case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7: + case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4: + case SMA1303_33_SDM_CTRL: + case SMA1303_36_PROTECTION ... SMA1303_37_SLOPE_CTRL: + case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2: + case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL: + case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4: + case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON: + result = true; + break; + default: + result = false; + } + return result; +} + +static bool sma1303_volatile_register(struct device *dev, unsigned int reg) +{ + bool result; + + switch (reg) { + case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2: + result = true; + break; + case SMA1303_FF_DEVICE_INDEX: + result = true; + break; + default: + result = false; + } + return result; +} + +static const DECLARE_TLV_DB_SCALE(sma1303_spk_tlv, -6000, 50, 0); + +void sma1303_set_callback_func(struct callback_ops ops) +{ + if (ops.set_i2c_err) + gCallback.set_i2c_err = ops.set_i2c_err; +} +EXPORT_SYMBOL(sma1303_set_callback_func); + +static int sma1303_regmap_write(struct sma1303_priv *sma1303, + unsigned int reg, unsigned int val) +{ + int ret = 0; + int cnt = sma1303->retry_cnt; + + while (cnt--) { + ret = regmap_write(sma1303->regmap, reg, val); + if (ret < 0) { + dev_err(sma1303->dev, + "Failed to write [0x%02X]\n", reg); + if (gCallback.set_i2c_err) + gCallback.set_i2c_err(sma1303->dev, ret); + } else + break; + } + return ret; +} + +static int sma1303_regmap_update_bits(struct sma1303_priv *sma1303, + unsigned int reg, unsigned int mask, unsigned int val) +{ + int ret = 0; + int cnt = sma1303->retry_cnt; + + while (cnt--) { + ret = regmap_update_bits(sma1303->regmap, reg, mask, val); + if (ret < 0) { + dev_err(sma1303->dev, + "Failed to update [0x%02X]\n", reg); + if (gCallback.set_i2c_err) + gCallback.set_i2c_err(sma1303->dev, ret); + } else + break; + } + return ret; +} + +static int sma1303_regmap_read(struct sma1303_priv *sma1303, + unsigned int reg, unsigned int *val) +{ + int ret = 0; + int cnt = sma1303->retry_cnt; + + while (cnt--) { + ret = regmap_read(sma1303->regmap, reg, val); + if (ret < 0) { + dev_err(sma1303->dev, + "Failed to read [0x%02X]\n", reg); + if (gCallback.set_i2c_err) + gCallback.set_i2c_err(sma1303->dev, ret); + } else + break; + } + return ret; +} + +static const char * const sma1303_aif_in_source_text[] = { + "Mono", "Left", "Right"}; +static const char * const sma1303_aif_out_source_text[] = { + "Disable", "After_FmtC", "After_Mixer", "After_DSP", "After_Post", + "Clk_PLL", "Clk_OSC"}; + +static const struct soc_enum sma1303_aif_in_source_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_in_source_text), + sma1303_aif_in_source_text); +static const struct soc_enum sma1303_aif_out_source_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_out_source_text), + sma1303_aif_out_source_text); + +static int sma1303_force_mute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = (int)sma1303->force_mute_status; + dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__, + sma1303->force_mute_status ? "ON" : "OFF"); + + return 0; +} + +static int sma1303_force_mute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + sma1303->force_mute_status = (bool)ucontrol->value.integer.value[0]; + dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__, + sma1303->force_mute_status ? "ON" : "OFF"); + + return 0; +} + +static int sma1303_postscaler_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int val, ret; + + ret = sma1303_regmap_read(sma1303, SMA1303_90_POSTSCALER, &val); + ucontrol->value.integer.value[0] = (val & 0x7E) >> 1; + + return ret; +} + +static int sma1303_postscaler_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret, sel = (int)ucontrol->value.integer.value[0]; + + ret = sma1303_regmap_update_bits(sma1303, + SMA1303_90_POSTSCALER, 0x70, (sel << 1)); + + return ret; +} + +static int sma1303_startup(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (sma1303->amp_power_status) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Power on"); + return ret; + } + + ret += sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL, + SMA1303_PLL_PD2_MASK, SMA1303_PLL_OPERATION2); + + ret += sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL, + SMA1303_POWER_MASK, SMA1303_POWER_ON); + + if (sma1303->amp_mode == SMA1303_MONO) + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_10_SYSTEM_CTRL1, + SMA1303_SPK_MODE_MASK, + SMA1303_SPK_MONO); + else + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_10_SYSTEM_CTRL1, + SMA1303_SPK_MODE_MASK, + SMA1303_SPK_STEREO); + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + sma1303->amp_power_status = true; + + return ret; +} + +static int sma1303_shutdown(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (!(sma1303->amp_power_status)) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Shutdown"); + return ret; + } + + cancel_delayed_work_sync(&sma1303->check_fault_work); + + msleep(55); + + ret += sma1303_regmap_update_bits(sma1303, SMA1303_10_SYSTEM_CTRL1, + SMA1303_SPK_MODE_MASK, SMA1303_SPK_OFF); + + ret += sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL, + SMA1303_POWER_MASK, SMA1303_POWER_OFF); + + ret += sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL, + SMA1303_PLL_PD2_MASK, SMA1303_PLL_PD2); + + sma1303->amp_power_status = false; + + return ret; +} + +static int sma1303_aif_in_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (mux) { + case 0: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_11_SYSTEM_CTRL2, + SMA1303_MONOMIX_MASK, + SMA1303_MONOMIX_ON); + ret += sma1303->amp_mode = SMA1303_MONO; + break; + case 1: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_11_SYSTEM_CTRL2, + SMA1303_MONOMIX_MASK, + SMA1303_MONOMIX_OFF); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_11_SYSTEM_CTRL2, + SMA1303_LR_DATA_SW_MASK, + SMA1303_LR_DATA_SW_NORMAL); + ret += sma1303->amp_mode = SMA1303_STEREO; + break; + case 2: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_11_SYSTEM_CTRL2, + SMA1303_MONOMIX_MASK, + SMA1303_MONOMIX_OFF); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_11_SYSTEM_CTRL2, + SMA1303_LR_DATA_SW_MASK, + SMA1303_LR_DATA_SW_NORMAL); + sma1303->amp_mode = SMA1303_STEREO; + break; + default: + dev_err(sma1303->dev, "%s : Invald value (%d)\n", + __func__, mux); + return -EINVAL; + } + + dev_info(sma1303->dev, "%s : Source : %s\n", __func__, + sma1303_aif_in_source_text[mux]); + break; + } + return ret; +} + +static int sma1303_aif_out_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (mux) { + case 0: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_NORMAL_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_OUT_SEL_MASK, + SMA1303_OUT_SEL_DISABLE); + break; + case 1: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_NORMAL_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_OUT_SEL_MASK, + SMA1303_FORMAT_CONVERTER); + break; + case 2: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_NORMAL_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_OUT_SEL_MASK, + SMA1303_MIXER_OUTPUT); + break; + case 3: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_NORMAL_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_OUT_SEL_MASK, + SMA1303_SPEAKER_PATH); + break; + case 4: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_NORMAL_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_OUT_SEL_MASK, + SMA1303_POSTSCALER_OUTPUT); + break; + case 5: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_CLK_OUT_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_MON_OSC_PLL_MASK, + SMA1303_PLL_SDO); + break; + case 6: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_TEST_CLKO_EN_MASK, + SMA1303_CLK_OUT_SDO); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_MON_OSC_PLL_MASK, + SMA1303_OSC_SDO); + break; + default: + dev_err(sma1303->dev, "%s : Invald value (%d)\n", + __func__, mux); + return -EINVAL; + } + + dev_info(sma1303->dev, "%s : Source : %s\n", __func__, + sma1303_aif_out_source_text[mux]); + break; + } + return ret; +} + +static int sma1303_sdo_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_PRE_PMU\n", __func__); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_CONFIG_MASK, + SMA1303_OUTPUT_PORT_ENABLE); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_SDO_OUTPUT_MASK, + SMA1303_NORMAL_OUT); + break; + case SND_SOC_DAPM_POST_PMD: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_POST_PMD\n", __func__); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_09_OUTPUT_CTRL, + SMA1303_PORT_CONFIG_MASK, + SMA1303_INPUT_PORT_ONLY); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A3_TOP_MAN2, + SMA1303_SDO_OUTPUT_MASK, + SMA1303_HIGH_Z_OUT); + break; + } + return ret; +} + +static int sma1303_post_scaler_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_PRE_PMU\n", __func__); + sma1303_regmap_update_bits(sma1303, + SMA1303_90_POSTSCALER, + SMA1303_BYP_POST_MASK, + SMA1303_EN_POST_SCALER); + break; + case SND_SOC_DAPM_POST_PMD: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_POST_PMD\n", __func__); + sma1303_regmap_update_bits(sma1303, + SMA1303_90_POSTSCALER, + SMA1303_BYP_POST_MASK, + SMA1303_BYP_POST_SCALER); + break; + } + return 0; +} + +static int sma1303_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_POST_PMU\n", __func__); + ret = sma1303_startup(component); + break; + case SND_SOC_DAPM_PRE_PMD: + dev_info(sma1303->dev, + "%s : SND_SOC_DAPM_PRE_PMD\n", __func__); + ret = sma1303_shutdown(component); + break; + } + return ret; +} + +static const struct snd_kcontrol_new sma1303_aif_in_source_control = + SOC_DAPM_ENUM("AIF IN Source", sma1303_aif_in_source_enum); +static const struct snd_kcontrol_new sma1303_aif_out_source_control = + SOC_DAPM_ENUM("AIF OUT Source", sma1303_aif_out_source_enum); +static const struct snd_kcontrol_new sma1303_sdo_control = + SOC_DAPM_SINGLE_VIRT("Switch", 1); +static const struct snd_kcontrol_new sma1303_post_scaler_control = + SOC_DAPM_SINGLE_VIRT("Switch", 1); +static const struct snd_kcontrol_new sma1303_enable_control = + SOC_DAPM_SINGLE_VIRT("Switch", 1); + +static const struct snd_kcontrol_new sma1303_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Volume", SMA1303_0A_SPK_VOL, + 0, 167, 1, sma1303_spk_tlv), + SOC_SINGLE_BOOL_EXT("Force Mute", 0, + sma1303_force_mute_get, sma1303_force_mute_put), + SOC_SINGLE_EXT("Postscaler Gain", SMA1303_90_POSTSCALER, 1, 0x30, 0, + sma1303_postscaler_get, sma1303_postscaler_put), +}; + +static const struct snd_soc_dapm_widget sma1303_dapm_widgets[] = { + /* platform domain */ + SND_SOC_DAPM_OUTPUT("SPK"), + SND_SOC_DAPM_INPUT("SDO"), + + /* path domain */ + SND_SOC_DAPM_MUX_E("AIF IN Source", SND_SOC_NOPM, 0, 0, + &sma1303_aif_in_source_control, + sma1303_aif_in_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_MUX_E("AIF OUT Source", SND_SOC_NOPM, 0, 0, + &sma1303_aif_out_source_control, + sma1303_aif_out_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_SWITCH_E("SDO Enable", SND_SOC_NOPM, 0, 0, + &sma1303_sdo_control, + sma1303_sdo_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MIXER("Entry", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_SWITCH_E("Post Scaler", SND_SOC_NOPM, 0, 1, + &sma1303_post_scaler_control, + sma1303_post_scaler_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_OUT_DRV_E("AMP Power", SND_SOC_NOPM, 0, 0, NULL, 0, + sma1303_power_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 1, + &sma1303_enable_control), + + /* stream domain */ + SND_SOC_DAPM_AIF_IN("AIF IN", "Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route sma1303_audio_map[] = { + /* Playback */ + {"AIF IN Source", "Mono", "AIF IN"}, + {"AIF IN Source", "Left", "AIF IN"}, + {"AIF IN Source", "Right", "AIF IN"}, + + {"SDO Enable", "Switch", "AIF IN"}, + {"AIF OUT Source", "Disable", "SDO Enable"}, + {"AIF OUT Source", "After_FmtC", "SDO Enable"}, + {"AIF OUT Source", "After_Mixer", "SDO Enable"}, + {"AIF OUT Source", "After_DSP", "SDO Enable"}, + {"AIF OUT Source", "After_Post", "SDO Enable"}, + {"AIF OUT Source", "Clk_PLL", "SDO Enable"}, + {"AIF OUT Source", "Clk_OSC", "SDO Enable"}, + + {"Entry", NULL, "AIF OUT Source"}, + {"Entry", NULL, "AIF IN Source"}, + + {"Post Scaler", "Switch", "Entry"}, + {"AMP Power", NULL, "Entry"}, + {"AMP Power", NULL, "Entry"}, + + {"AMP Enable", "Switch", "AMP Power"}, + {"SPK", NULL, "AMP Enable"}, + + /* Capture */ + {"AIF OUT", NULL, "AMP Enable"}, +}; + +static int sma1303_add_component_controls(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + unsigned char **name; + int index, ret = 0, size, apply = 0; + + sma1303_controls = devm_kzalloc(sma1303->dev, + sizeof(sma1303_snd_controls), GFP_KERNEL); + name = devm_kzalloc(sma1303->dev, ARRAY_SIZE(sma1303_snd_controls), + GFP_KERNEL); + + for (index = 0; index < ARRAY_SIZE(sma1303_snd_controls); index++) { + sma1303_controls[index] = sma1303_snd_controls[index]; + name[index] = devm_kzalloc(sma1303->dev, + MAX_CONTROL_NAME, GFP_KERNEL); + size = strlen(sma1303_snd_controls[index].name) + + strlen(sma1303->dev->driver->name); + if (!name[index] || size > MAX_CONTROL_NAME) { + sma1303_controls[index].name = + sma1303_snd_controls[index].name; + } else { + scnprintf(name[index], MAX_CONTROL_NAME, "%s %s", + sma1303->dev->driver->name, + sma1303_snd_controls[index].name); + sma1303_controls[index].name = name[index]; + apply++; + } + } + + ret = snd_soc_add_component_controls(component, + sma1303_controls, ARRAY_SIZE(sma1303_snd_controls)); + + dev_info(sma1303->dev, + "%s : prefix=\"%s\", total_num=%d, apply_num=%d\n", + __func__, sma1303->dev->driver->name, + (int)ARRAY_SIZE(sma1303_snd_controls), apply); + + return ret; + +} + +static int sma1303_setup_pll(struct snd_soc_component *component, + unsigned int bclk) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + int i = 0, ret = 0; + + dev_info(component->dev, "%s : BCLK = %dHz\n", + __func__, bclk); + + if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK) { + dev_info(component->dev, "%s : MCLK is not supported\n", + __func__); + } else if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) { + for (i = 0; i < sma1303->num_of_pll_matches; i++) { + if (sma1303->pll_matches[i].input_clk == bclk) + break; + } + if (i == sma1303->num_of_pll_matches) { + dev_info(component->dev, "%s : No matching value between pll table and SCK\n", + __func__); + return -EINVAL; + } + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A2_TOP_MAN1, + SMA1303_PLL_PD_MASK|SMA1303_PLL_REF_CLK_MASK, + SMA1303_PLL_OPERATION|SMA1303_PLL_SCK); + } + + ret += sma1303_regmap_write(sma1303, + SMA1303_8B_PLL_POST_N, + sma1303->pll_matches[i].post_n); + + ret += sma1303_regmap_write(sma1303, + SMA1303_8C_PLL_N, + sma1303->pll_matches[i].n); + + ret += sma1303_regmap_write(sma1303, + SMA1303_8D_PLL_A_SETTING, + sma1303->pll_matches[i].vco); + + ret += sma1303_regmap_write(sma1303, + SMA1303_8F_PLL_P_CP, + sma1303->pll_matches[i].p_cp); + + return ret; +} + +static int sma1303_dai_hw_params_amp(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + unsigned int bclk = 0; + int ret = 0; + + if (sma1303->format == SND_SOC_DAIFMT_DSP_A) + bclk = params_rate(params) * sma1303->frame_size; + else + bclk = params_rate(params) * params_physical_width(params) + * params_channels(params); + + dev_info(component->dev, + "%s : rate = %d : bit size = %d : channel = %d\n", + __func__, params_rate(params), params_width(params), + params_channels(params)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + + if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK + || sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) { + + if (sma1303->last_bclk != bclk) { + sma1303_setup_pll(component, bclk); + sma1303->last_bclk = bclk; + } + } + + switch (params_rate(params)) { + case 8000: + case 12000: + case 16000: + case 24000: + case 32000: + case 44100: + case 48000: + case 96000: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A2_TOP_MAN1, + SMA1303_DAC_DN_CONV_MASK, + SMA1303_DAC_DN_CONV_DISABLE); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_LEFTPOL_MASK, + SMA1303_LOW_FIRST_CH); + break; + + case 192000: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A2_TOP_MAN1, + SMA1303_DAC_DN_CONV_MASK, + SMA1303_DAC_DN_CONV_ENABLE); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_LEFTPOL_MASK, + SMA1303_HIGH_FIRST_CH); + break; + + default: + dev_err(component->dev, "%s not support rate : %d\n", + __func__, params_rate(params)); + + return -EINVAL; + } + + } else { + + switch (params_format(params)) { + + case SNDRV_PCM_FORMAT_S16_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S16_LE\n", + __func__); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_SCK_RATE_MASK, + SMA1303_SCK_32FS); + break; + + case SNDRV_PCM_FORMAT_S24_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S24_LE\n", + __func__); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_SCK_RATE_MASK, + SMA1303_SCK_64FS); + break; + case SNDRV_PCM_FORMAT_S32_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S32_LE\n", + __func__); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_SCK_RATE_MASK, + SMA1303_SCK_64FS); + break; + default: + dev_err(component->dev, + "%s not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + } + + switch (sma1303->format) { + case SND_SOC_DAIFMT_I2S: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_I2S_MODE_MASK, + SMA1303_STANDARD_I2S); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_O_FORMAT_MASK, + SMA1303_O_FMT_I2S); + break; + case SND_SOC_DAIFMT_LEFT_J: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_I2S_MODE_MASK, + SMA1303_LJ); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_O_FORMAT_MASK, + SMA1303_O_FMT_LJ); + break; + case SND_SOC_DAIFMT_RIGHT_J: + switch (params_width(params)) { + case 16: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_I2S_MODE_MASK, + SMA1303_RJ_16BIT); + break; + case 24: + case 32: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_I2S_MODE_MASK, + SMA1303_RJ_24BIT); + break; + } + break; + case SND_SOC_DAIFMT_DSP_A: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_I2S_MODE_MASK, + SMA1303_STANDARD_I2S); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_O_FORMAT_MASK, + SMA1303_O_FMT_TDM); + break; + } + + switch (params_width(params)) { + case 16: + case 24: + case 32: + break; + default: + dev_err(component->dev, + "%s not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + + return ret; +} + +static int sma1303_dai_set_sysclk_amp(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + switch (clk_id) { + case SMA1303_EXTERNAL_CLOCK_19_2: + break; + case SMA1303_EXTERNAL_CLOCK_24_576: + break; + case SMA1303_PLL_CLKIN_MCLK: + break; + case SMA1303_PLL_CLKIN_BCLK: + break; + default: + dev_err(component->dev, "Invalid clk id: %d\n", clk_id); + return -EINVAL; + } + sma1303->sys_clk_id = clk_id; + return 0; +} + +static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int stream) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (stream == SNDRV_PCM_STREAM_CAPTURE) + return ret; + + if (!(sma1303->amp_power_status)) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Shutdown"); + return ret; + } + + if (mute) { + dev_info(component->dev, "%s : %s\n", __func__, "MUTE"); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_0E_MUTE_VOL_CTRL, + SMA1303_SPK_MUTE_MASK, + SMA1303_SPK_MUTE); + } else { + if (!sma1303->force_mute_status) { + dev_info(component->dev, "%s : %s\n", + __func__, "UNMUTE"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_0E_MUTE_VOL_CTRL, + SMA1303_SPK_MUTE_MASK, + SMA1303_SPK_UNMUTE); + } else { + dev_info(sma1303->dev, + "%s : FORCE MUTE!!!\n", __func__); + } + } + + return ret; +} + +static int sma1303_dai_set_fmt_amp(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + + case SND_SOC_DAIFMT_CBS_CFS: + dev_info(component->dev, + "%s : %s\n", __func__, "I2S/TDM Device mode"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_CONTROLLER_DEVICE_MASK, + SMA1303_DEVICE_MODE); + break; + + case SND_SOC_DAIFMT_CBM_CFM: + dev_info(component->dev, + "%s : %s\n", __func__, "I2S/TDM Controller mode"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_CONTROLLER_DEVICE_MASK, + SMA1303_CONTROLLER_MODE); + break; + + default: + dev_err(component->dev, + "Unsupported Controller/Device : 0x%x\n", fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + sma1303->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + break; + default: + dev_err(component->dev, + "Unsupported Audio Interface Format : 0x%x\n", fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + + case SND_SOC_DAIFMT_IB_NF: + dev_info(component->dev, "%s : %s\n", + __func__, "Invert BCLK + Normal Frame"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_SCK_RISING_MASK, + SMA1303_SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_IB_IF: + dev_info(component->dev, "%s : %s\n", + __func__, "Invert BCLK + Invert Frame"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_LEFTPOL_MASK|SMA1303_SCK_RISING_MASK, + SMA1303_HIGH_FIRST_CH|SMA1303_SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_NB_IF: + dev_info(component->dev, "%s : %s\n", + __func__, "Normal BCLK + Invert Frame"); + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_01_INPUT1_CTRL1, + SMA1303_LEFTPOL_MASK, + SMA1303_HIGH_FIRST_CH); + break; + case SND_SOC_DAIFMT_NB_NF: + dev_info(component->dev, "%s : %s\n", + __func__, "Normal BCLK + Normal Frame"); + break; + default: + dev_err(component->dev, + "Unsupported Bit & Frameclock : 0x%x\n", fmt); + return -EINVAL; + } + + return ret; +} + +static int sma1303_dai_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + dev_info(component->dev, "%s : slots = %d, slot_width - %d\n", + __func__, slots, slot_width); + + sma1303->frame_size = slot_width * slots; + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A4_TOP_MAN3, + SMA1303_O_FORMAT_MASK, + SMA1303_O_FMT_TDM); + + switch (slot_width) { + case 16: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A6_TDM2, + SMA1303_TDM_DL_MASK, + SMA1303_TDM_DL_16); + break; + case 32: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A6_TDM2, + SMA1303_TDM_DL_MASK, + SMA1303_TDM_DL_32); + break; + default: + dev_err(component->dev, "%s not support TDM %d slot_width\n", + __func__, slot_width); + } + + switch (slots) { + case 4: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A6_TDM2, + SMA1303_TDM_N_SLOT_MASK, + SMA1303_TDM_N_SLOT_4); + break; + case 8: + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A6_TDM2, + SMA1303_TDM_N_SLOT_MASK, + SMA1303_TDM_N_SLOT_8); + break; + default: + dev_err(component->dev, "%s not support TDM %d slots\n", + __func__, slots); + } + + if (sma1303->tdm_slot_rx < slots) + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A5_TDM1, + SMA1303_TDM_SLOT1_RX_POS_MASK, + (sma1303->tdm_slot_rx) << 3); + else + dev_err(component->dev, "%s Incorrect tdm-slot-rx %d set\n", + __func__, sma1303->tdm_slot_rx); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A5_TDM1, + SMA1303_TDM_CLK_POL_MASK, + SMA1303_TDM_CLK_POL_RISE); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A5_TDM1, + SMA1303_TDM_TX_MODE_MASK, + SMA1303_TDM_TX_MONO); + + if (sma1303->tdm_slot_tx < slots) + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_A6_TDM2, + SMA1303_TDM_SLOT1_TX_POS_MASK, + (sma1303->tdm_slot_tx) << 3); + else + dev_err(component->dev, "%s Incorrect tdm-slot-tx %d set\n", + __func__, sma1303->tdm_slot_tx); + + return ret; +} + +static const struct snd_soc_dai_ops sma1303_dai_ops_amp = { + .set_sysclk = sma1303_dai_set_sysclk_amp, + .set_fmt = sma1303_dai_set_fmt_amp, + .hw_params = sma1303_dai_hw_params_amp, + .mute_stream = sma1303_dai_mute, + .set_tdm_slot = sma1303_dai_set_tdm_slot, +}; + +#define SMA1303_RATES SNDRV_PCM_RATE_8000_192000 +#define SMA1303_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver sma1303_dai[] = { + { + .name = "sma1303-amplifier", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1303_RATES, + .formats = SMA1303_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1303_RATES, + .formats = SMA1303_FORMATS, + }, + .ops = &sma1303_dai_ops_amp, + }, +}; + +static void sma1303_check_fault_worker(struct work_struct *work) +{ + struct sma1303_priv *sma1303 = + container_of(work, struct sma1303_priv, check_fault_work.work); + int ret = 0; + unsigned int over_temp, ocp_val, uvlo_val; + + mutex_lock(&sma1303->lock); + + if (sma1303->tsdw_cnt) + ret = sma1303_regmap_read(sma1303, + SMA1303_0A_SPK_VOL, &sma1303->cur_vol); + else + ret = sma1303_regmap_read(sma1303, + SMA1303_0A_SPK_VOL, &sma1303->init_vol); + + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_0A_SPK_VOL : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = sma1303_regmap_read(sma1303, SMA1303_FA_STATUS1, &over_temp); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FA_STATUS1 : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &ocp_val); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FB_STATUS2 : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &uvlo_val); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FF_DEVICE_INDEX : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + if (~over_temp & SMA1303_OT1_OK_STATUS) { + dev_crit(sma1303->dev, + "%s : OT1(Over Temperature Level 1)\n", __func__); + + if ((sma1303->cur_vol + 6) <= 0xFF) + sma1303_regmap_write(sma1303, + SMA1303_0A_SPK_VOL, sma1303->cur_vol + 6); + + sma1303->tsdw_cnt++; + } else if (sma1303->tsdw_cnt) { + sma1303_regmap_write(sma1303, + SMA1303_0A_SPK_VOL, sma1303->init_vol); + sma1303->tsdw_cnt = 0; + sma1303->cur_vol = sma1303->init_vol; + } + + if (~over_temp & SMA1303_OT2_OK_STATUS) { + dev_crit(sma1303->dev, + "%s : OT2(Over Temperature Level 2)\n", __func__); + } + if (ocp_val & SMA1303_OCP_SPK_STATUS) { + dev_crit(sma1303->dev, + "%s : OCP_SPK(Over Current Protect SPK)\n", __func__); + } + if (ocp_val & SMA1303_OCP_BST_STATUS) { + dev_crit(sma1303->dev, + "%s : OCP_BST(Over Current Protect Boost)\n", __func__); + } + if ((ocp_val & SMA1303_CLK_MON_STATUS) && (sma1303->amp_power_status)) { + dev_crit(sma1303->dev, + "%s : CLK_FAULT(No clock input)\n", __func__); + } + if (uvlo_val & SMA1303_UVLO_BST_STATUS) { + dev_crit(sma1303->dev, + "%s : UVLO(Under Voltage Lock Out)\n", __func__); + } + + if ((over_temp != sma1303->last_over_temp) || + (ocp_val != sma1303->last_ocp_val)) { + + dev_crit(sma1303->dev, "Please check AMP status"); + dev_info(sma1303->dev, "STATUS1=0x%02X : STATUS2=0x%02X\n", + over_temp, ocp_val); + sma1303->last_over_temp = over_temp; + sma1303->last_ocp_val = ocp_val; + } + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + if (!(~over_temp & SMA1303_OT1_OK_STATUS) + && !(~over_temp & SMA1303_OT2_OK_STATUS) + && !(ocp_val & SMA1303_OCP_SPK_STATUS) + && !(ocp_val & SMA1303_OCP_BST_STATUS) + && !(ocp_val & SMA1303_CLK_MON_STATUS) + && !(uvlo_val & SMA1303_UVLO_BST_STATUS)) { + } + + mutex_unlock(&sma1303->lock); +} + +static int sma1303_probe(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + int ret = 0; + + ret += sma1303_add_component_controls(component); + + snd_soc_dapm_sync(dapm); + + ret += sma1303_regmap_write(sma1303, + SMA1303_0A_SPK_VOL, sma1303->init_vol); + + dev_info(component->dev, + "%s init_vol is 0x%x\n", __func__, sma1303->init_vol); + + return ret; +} + +static void sma1303_remove(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + cancel_delayed_work_sync(&sma1303->check_fault_work); +} + +static const struct snd_soc_component_driver sma1303_component = { + .probe = sma1303_probe, + .remove = sma1303_remove, + .dapm_widgets = sma1303_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(sma1303_dapm_widgets), + .dapm_routes = sma1303_audio_map, + .num_dapm_routes = ARRAY_SIZE(sma1303_audio_map), +}; + +const struct regmap_config sma_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SMA1303_FF_DEVICE_INDEX, + .readable_reg = sma1303_readable_register, + .writeable_reg = sma1303_writeable_register, + .volatile_reg = sma1303_volatile_register, + + .cache_type = REGCACHE_NONE, + .reg_defaults = sma1303_reg_def, + .num_reg_defaults = ARRAY_SIZE(sma1303_reg_def), +}; + +static ssize_t check_fault_period_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int rc; + + rc = (int)snprintf(buf, PAGE_SIZE, + "%ld\n", sma1303->check_fault_period); + + return (ssize_t)rc; +} + +static ssize_t check_fault_period_store(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int ret; + + ret = kstrtol(buf, 10, &sma1303->check_fault_period); + + if (ret) + return -EINVAL; + + return (ssize_t)count; +} + +static DEVICE_ATTR_RW(check_fault_period); + +static ssize_t check_fault_status_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int rc; + + rc = (int)snprintf(buf, PAGE_SIZE, + "%ld\n", sma1303->check_fault_status); + + return (ssize_t)rc; +} + +static ssize_t check_fault_status_store(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int ret; + + ret = kstrtol(buf, 10, &sma1303->check_fault_status); + + if (ret) + return -EINVAL; + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + return (ssize_t)count; +} + +static DEVICE_ATTR_RW(check_fault_status); + +static struct attribute *sma1303_attr[] = { + &dev_attr_check_fault_period.attr, + &dev_attr_check_fault_status.attr, + NULL, +}; + +static struct attribute_group sma1303_attr_group = { + .attrs = sma1303_attr, +}; + +static int sma1303_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sma1303_priv *sma1303; + struct device_node *np = client->dev.of_node; + int ret, i = 0; + u32 value = 0; + unsigned int device_info, status, otp_stat; + + sma1303 = devm_kzalloc(&client->dev, + sizeof(struct sma1303_priv), GFP_KERNEL); + if (!sma1303) + return -ENOMEM; + sma1303->dev = &client->dev; + + sma1303->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap); + if (IS_ERR(sma1303->regmap)) { + ret = PTR_ERR(sma1303->regmap); + dev_err(&client->dev, + "Failed to allocate register map: %d\n", ret); + + return ret; + } + + if (np) { + if (!of_property_read_u32(np, "i2c-retry", &value)) { + if (value > 50 || value <= 0) { + sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT; + dev_info(&client->dev, "%s : %s\n", __func__, + "i2c-retry out of range (up to 50)"); + } else { + sma1303->retry_cnt = value; + dev_info(&client->dev, "%s : %s = %u\n", + __func__, "i2c-retry count", value); + } + } else { + dev_info(&client->dev, "%s : %s = %d\n", __func__, + "i2c-retry count", SMA1303_I2C_RETRY_COUNT); + sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT; + } + if (!of_property_read_u32(np, "tdm-slot-rx", &value)) { + dev_info(&client->dev, + "tdm slot rx is '%d' from DT\n", value); + sma1303->tdm_slot_rx = value; + } else { + dev_info(&client->dev, + "Default setting of tdm slot rx is '0'\n"); + sma1303->tdm_slot_rx = 0; + } + if (!of_property_read_u32(np, "tdm-slot-tx", &value)) { + dev_info(&client->dev, + "tdm slot tx is '%u' from DT\n", value); + sma1303->tdm_slot_tx = value; + } else { + dev_info(&client->dev, + "Default setting of tdm slot tx is '0'\n"); + sma1303->tdm_slot_tx = 0; + } + if (!of_property_read_u32(np, "sys-clk-id", &value)) { + switch (value) { + case SMA1303_EXTERNAL_CLOCK_19_2: + case SMA1303_EXTERNAL_CLOCK_24_576: + case SMA1303_PLL_CLKIN_MCLK: + dev_info(&client->dev, "MCLK is not supported\n"); + break; + case SMA1303_PLL_CLKIN_BCLK: + dev_info(&client->dev, + "Take an BCLK(SCK) and covert it to an internal PLL for use\n"); + break; + default: + dev_err(&client->dev, + "Invalid sys-clk-id: %u\n", value); + return -EINVAL; + } + sma1303->sys_clk_id = value; + } else { + dev_info(&client->dev, "Use the internal PLL clock by default\n"); + sma1303->sys_clk_id = SMA1303_PLL_CLKIN_BCLK; + } + } else { + dev_err(&client->dev, + "device node initialization error\n"); + devm_kfree(&client->dev, sma1303); + return -ENODEV; + } + + ret = sma1303_regmap_read(sma1303, + SMA1303_FF_DEVICE_INDEX, &device_info); + + if ((ret != 0) || ((device_info & 0xF8) != SMA1303_DEVICE_ID)) { + dev_err(&client->dev, "device initialization error (%d 0x%02X)", + ret, device_info); + } + dev_info(&client->dev, "chip version 0x%02X\n", device_info); + + ret += sma1303_regmap_update_bits(sma1303, + SMA1303_00_SYSTEM_CTRL, + SMA1303_RESETBYI2C_MASK, SMA1303_RESETBYI2C_RESET); + + ret += sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &status); + sma1303->rev_num = status & SMA1303_REV_NUM_STATUS; + if (sma1303->rev_num == SMA1303_REV_NUM_TV0) + dev_info(&client->dev, "SMA1303 Trimming Version 0\n"); + else if (sma1303->rev_num == SMA1303_REV_NUM_TV1) + dev_info(&client->dev, "SMA1303 Trimming Version 1\n"); + + ret += sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &otp_stat); + if (ret < 0) + dev_err(&client->dev, + "failed to read, register: %02X, ret: %d\n", + SMA1303_FF_DEVICE_INDEX, ret); + + if (((sma1303->rev_num == SMA1303_REV_NUM_TV0) && + ((otp_stat & 0x0E) == SMA1303_OTP_STAT_OK_0)) || + ((sma1303->rev_num != SMA1303_REV_NUM_TV0) && + ((otp_stat & 0x0C) == SMA1303_OTP_STAT_OK_1))) + dev_info(&client->dev, "SMA1303 OTP Status Successful\n"); + else + dev_info(&client->dev, "SMA1303 OTP Status Fail\n"); + + for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1303_reg_def); i++) + ret += sma1303_regmap_write(sma1303, + sma1303_reg_def[i].reg, + sma1303_reg_def[i].def); + + sma1303->amp_mode = SMA1303_MONO; + sma1303->amp_power_status = false; + sma1303->check_fault_period = CHECK_PERIOD_TIME; + sma1303->check_fault_status = true; + sma1303->force_mute_status = false; + sma1303->init_vol = 0x31; + sma1303->cur_vol = sma1303->init_vol; + sma1303->last_bclk = 0; + sma1303->last_ocp_val = 0x08; + sma1303->last_over_temp = 0xC0; + sma1303->tsdw_cnt = 0; + + sma1303->dev = &client->dev; + sma1303->kobj = &client->dev.kobj; + + mutex_init(&sma1303->lock); + + INIT_DELAYED_WORK(&sma1303->check_fault_work, + sma1303_check_fault_worker); + + i2c_set_clientdata(client, sma1303); + + sma1303->pll_matches = sma1303_pll_matches; + sma1303->num_of_pll_matches = + ARRAY_SIZE(sma1303_pll_matches); + + ret = devm_snd_soc_register_component(&client->dev, + &sma1303_component, sma1303_dai, 1); + if (ret) { + dev_err(&client->dev, "Failed to register component"); + + return ret; + } + + sma1303->attr_grp = &sma1303_attr_group; + ret = sysfs_create_group(sma1303->kobj, sma1303->attr_grp); + if (ret) { + dev_err(&client->dev, + "failed to create attribute group [%d]\n", ret); + sma1303->attr_grp = NULL; + } + + return ret; +} + +static void sma1303_i2c_remove(struct i2c_client *client) +{ + struct sma1303_priv *sma1303 = + (struct sma1303_priv *) i2c_get_clientdata(client); + + cancel_delayed_work_sync(&sma1303->check_fault_work); +} + +static const struct i2c_device_id sma1303_i2c_id[] = { + {"sma1303", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, sma1303_i2c_id); + +static const struct of_device_id sma1303_of_match[] = { + { .compatible = "irondevice,sma1303", }, + { } +}; +MODULE_DEVICE_TABLE(of, sma1303_of_match); + +static struct i2c_driver sma1303_i2c_driver = { + .driver = { + .name = "sma1303", + .of_match_table = sma1303_of_match, + }, + .probe = sma1303_i2c_probe, + .remove = sma1303_i2c_remove, + .id_table = sma1303_i2c_id, +}; + +module_i2c_driver(sma1303_i2c_driver); + +MODULE_DESCRIPTION("ALSA SoC SMA1303 driver"); +MODULE_AUTHOR("Gyuhwa Park, "); +MODULE_AUTHOR("Kiseok Jo, "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/sma1303.h b/sound/soc/codecs/sma1303.h new file mode 100644 index 000000000000..a96c3de28d57 --- /dev/null +++ b/sound/soc/codecs/sma1303.h @@ -0,0 +1,616 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * sma1303.h -- sma1303 ALSA SoC Audio driver + * + * Copyright 2023 Iron Device Corporation + * + * Author: Kiseok Jo + * + */ + +#ifndef _SMA1303_H +#define _SMA1303_H + +typedef void (*callback_fptr) (void *device, int err); +struct callback_ops { + callback_fptr set_i2c_err; +}; + +void sma1303_set_callback_func(struct callback_ops ops); + +#define SMA1303_I2C_ADDR_00 0x1e +#define SMA1303_I2C_ADDR_01 0x3e +#define SMA1303_I2C_ADDR_10 0x5e +#define SMA1303_I2C_ADDR_11 0x7e + +#define SMA1303_EXTERNAL_CLOCK_19_2 0x00 +#define SMA1303_EXTERNAL_CLOCK_24_576 0x01 +#define SMA1303_PLL_CLKIN_MCLK 0x02 +#define SMA1303_PLL_CLKIN_BCLK 0x03 + +#define SMA1303_MONO 0x00 +#define SMA1303_STEREO 0x01 + +#define SMA1303_I2C_RETRY_COUNT 3 + +/* + * SMA1303 Register Definition + */ + +/* SMA1303 Register Addresses */ +#define SMA1303_00_SYSTEM_CTRL 0x00 +#define SMA1303_01_INPUT1_CTRL1 0x01 +#define SMA1303_02_INPUT1_CTRL2 0x02 +#define SMA1303_03_INPUT1_CTRL3 0x03 +#define SMA1303_04_INPUT1_CTRL4 0x04 +/* 0x05 ~ 0x08 : Reserved */ +#define SMA1303_09_OUTPUT_CTRL 0x09 +#define SMA1303_0A_SPK_VOL 0x0a +#define SMA1303_0B_BST_TEST 0x0b +#define SMA1303_0C_BST_TEST1 0x0c +#define SMA1303_0D_SPK_TEST 0x0d +#define SMA1303_0E_MUTE_VOL_CTRL 0x0e +/* 0x0F : Reserved */ +#define SMA1303_10_SYSTEM_CTRL1 0x10 +#define SMA1303_11_SYSTEM_CTRL2 0x11 +#define SMA1303_12_SYSTEM_CTRL3 0x12 +/* 0x13 : Reserved */ +#define SMA1303_14_MODULATOR 0x14 +#define SMA1303_15_BASS_SPK1 0x15 +#define SMA1303_16_BASS_SPK2 0x16 +#define SMA1303_17_BASS_SPK3 0x17 +#define SMA1303_18_BASS_SPK4 0x18 +#define SMA1303_19_BASS_SPK5 0x19 +#define SMA1303_1A_BASS_SPK6 0x1a +#define SMA1303_1B_BASS_SPK7 0x1b +/* 0x1C ~ 0x22 : Reserved */ +#define SMA1303_23_COMP_LIM1 0x23 +#define SMA1303_24_COMP_LIM2 0x24 +#define SMA1303_25_COMP_LIM3 0x25 +#define SMA1303_26_COMP_LIM4 0x26 +/* 0x27 ~ 0x32 : Reserved */ +#define SMA1303_33_SDM_CTRL 0x33 +#define SMA1303_34_OTP_DATA1 0x34 +/* 0x35 : Reserved */ +#define SMA1303_36_PROTECTION 0x36 +#define SMA1303_37_SLOPE_CTRL 0x37 +#define SMA1303_38_OTP_TRM0 0x38 +/* 0x39 ~ 0x3A : Reserved */ +#define SMA1303_3B_TEST1 0x3b +#define SMA1303_3C_TEST2 0x3c +#define SMA1303_3D_TEST3 0x3d +#define SMA1303_3E_ATEST1 0x3e +#define SMA1303_3F_ATEST2 0x3f +/* 0x40 ~ 0x8A : Reserved */ +#define SMA1303_8B_PLL_POST_N 0x8b +#define SMA1303_8C_PLL_N 0x8c +#define SMA1303_8D_PLL_A_SETTING 0x8d +#define SMA1303_8E_PLL_CTRL 0x8e +#define SMA1303_8F_PLL_P_CP 0x8f +#define SMA1303_90_POSTSCALER 0x90 +#define SMA1303_91_CLASS_G_CTRL 0x91 +#define SMA1303_92_FDPEC_CTRL 0x92 +/* 0x93 : Reserved */ +#define SMA1303_94_BOOST_CTRL1 0x94 +#define SMA1303_95_BOOST_CTRL2 0x95 +#define SMA1303_96_BOOST_CTRL3 0x96 +#define SMA1303_97_BOOST_CTRL4 0x97 +/* 0x98 ~ 0x9F : Reserved */ +#define SMA1303_A0_PAD_CTRL0 0xa0 +#define SMA1303_A1_PAD_CTRL1 0xa1 +#define SMA1303_A2_TOP_MAN1 0xa2 +#define SMA1303_A3_TOP_MAN2 0xa3 +#define SMA1303_A4_TOP_MAN3 0xa4 +#define SMA1303_A5_TDM1 0xa5 +#define SMA1303_A6_TDM2 0xa6 +#define SMA1303_A7_CLK_MON 0xa7 +/* 0xA8 ~ 0xF9 : Reserved */ +#define SMA1303_FA_STATUS1 0xfa +#define SMA1303_FB_STATUS2 0xfb +/* 0xFC ~ 0xFE : Reserved */ +#define SMA1303_FF_DEVICE_INDEX 0xff + +/* SMA1303 Registers Bit Fields */ + +/* SYSTEM_CTRL : 0x00 */ +#define SMA1303_RESETBYI2C_MASK (1<<1) +#define SMA1303_RESETBYI2C_NORMAL (0<<1) +#define SMA1303_RESETBYI2C_RESET (1<<1) + +#define SMA1303_POWER_MASK (1<<0) +#define SMA1303_POWER_OFF (0<<0) +#define SMA1303_POWER_ON (1<<0) + +/* INTPUT CTRL1 : 0x01 */ +#define SMA1303_CONTROLLER_DEVICE_MASK (1<<7) +#define SMA1303_DEVICE_MODE (0<<7) +#define SMA1303_CONTROLLER_MODE (1<<7) + +#define SMA1303_I2S_MODE_MASK (7<<4) +#define SMA1303_STANDARD_I2S (0<<4) +#define SMA1303_LJ (1<<4) +#define SMA1303_RJ_16BIT (4<<4) +#define SMA1303_RJ_18BIT (5<<4) +#define SMA1303_RJ_20BIT (6<<4) +#define SMA1303_RJ_24BIT (7<<4) + +#define SMA1303_LEFTPOL_MASK (1<<3) +#define SMA1303_LOW_FIRST_CH (0<<3) +#define SMA1303_HIGH_FIRST_CH (1<<3) + +#define SMA1303_SCK_RISING_MASK (1<<2) +#define SMA1303_SCK_FALLING_EDGE (0<<2) +#define SMA1303_SCK_RISING_EDGE (1<<2) + +/* INTPUT CTRL2 : 0x02 */ +#define SMA1303_IMODE_MASK (3<<6) +#define SMA1303_I2S (0<<6) +#define SMA1303_PCM_SHORT (1<<6) +#define SMA1303_PCM_LONG (2<<6) + +#define RSMA1303_IGHT_FIRST_MASK (1<<5) +#define SMA1303_LEFT_NORMAL (0<<5) +#define SMA1303_RIGHT_INVERTED (1<<5) + +#define SMA1303_PCM_ALAW_MASK (1<<4) +#define SMA1303_PCM_U_DECODING (0<<4) +#define SMA1303_PCM_A_DECODING (1<<4) + +#define SMA1303_PCM_COMP_MASK (1<<3) +#define SMA1303_PCM_LINEAR (0<<3) +#define SMA1303_PCM_COMPANDING (1<<3) + +#define SMA1303_INPUTSEL_MASK (1<<2) +#define SMA1303_PCM_8KHZ (0<<2) +#define SMA1303_PCM_16KHZ (1<<2) + +#define SMA1303_PCM_STEREO_MASK (1<<1) +#define SMA1303_PCM_MONO (0<<1) +#define SMA1303_PCM_STEREO (1<<1) + +#define SMA1303_PCM_DL_MASK (1<<0) +#define SMA1303_PCM_8BIT (0<<0) +#define SMA1303_PCM_16BIT (1<<0) + +/* INTPUT CTRL3 : 0x03 */ +#define SMA1303_PCM_N_SLOT_MASK (15<<0) +#define SMA1303_PCM_N_SLOT1 (0<<0) +#define SMA1303_PCM_N_SLOT2 (1<<0) +#define SMA1303_PCM_N_SLOT3 (2<<0) +#define SMA1303_PCM_N_SLOT4 (3<<0) +#define SMA1303_PCM_N_SLOT5 (4<<0) +#define SMA1303_PCM_N_SLOT6 (5<<0) +#define SMA1303_PCM_N_SLOT7 (6<<0) +#define SMA1303_PCM_N_SLOT8 (7<<0) +#define SMA1303_PCM_N_SLOT9 (8<<0) +#define SMA1303_PCM_N_SLOT10 (9<<0) +#define SMA1303_PCM_N_SLOT11 (10<<0) +#define SMA1303_PCM_N_SLOT12 (11<<0) +#define SMA1303_PCM_N_SLOT13 (12<<0) +#define SMA1303_PCM_N_SLOT14 (13<<0) +#define SMA1303_PCM_N_SLOT15 (14<<0) +#define SMA1303_PCM_N_SLOT16 (15<<0) + +/* INTPUT CTRL4 : 0x04 */ +#define SMA1303_PCM1_SLOT_MASK (15<<4) +#define SMA1303_PCM1_SLOT1 (0<<4) +#define SMA1303_PCM1_SLOT2 (1<<4) +#define SMA1303_PCM1_SLOT3 (2<<4) +#define SMA1303_PCM1_SLOT4 (3<<4) +#define SMA1303_PCM1_SLOT5 (4<<4) +#define SMA1303_PCM1_SLOT6 (5<<4) +#define SMA1303_PCM1_SLOT7 (6<<4) +#define SMA1303_PCM1_SLOT8 (7<<4) +#define SMA1303_PCM1_SLOT9 (8<<4) +#define SMA1303_PCM1_SLOT10 (9<<4) +#define SMA1303_PCM1_SLOT11 (10<<4) +#define SMA1303_PCM1_SLOT12 (11<<4) +#define SMA1303_PCM1_SLOT13 (12<<4) +#define SMA1303_PCM1_SLOT14 (13<<4) +#define SMA1303_PCM1_SLOT15 (14<<4) +#define SMA1303_PCM1_SLOT16 (15<<4) + +#define SMA1303_PCM2_SLOT_MASK (15<<0) +#define SMA1303_PCM2_SLOT1 (0<<0) +#define SMA1303_PCM2_SLOT2 (1<<0) +#define SMA1303_PCM2_SLOT3 (2<<0) +#define SMA1303_PCM2_SLOT4 (3<<0) +#define SMA1303_PCM2_SLOT5 (4<<0) +#define SMA1303_PCM2_SLOT6 (5<<0) +#define SMA1303_PCM2_SLOT7 (6<<0) +#define SMA1303_PCM2_SLOT8 (7<<0) +#define SMA1303_PCM2_SLOT9 (8<<0) +#define SMA1303_PCM2_SLOT10 (9<<0) +#define SMA1303_PCM2_SLOT11 (10<<0) +#define SMA1303_PCM2_SLOT12 (11<<0) +#define SMA1303_PCM2_SLOT13 (12<<0) +#define SMA1303_PCM2_SLOT14 (13<<0) +#define SMA1303_PCM2_SLOT15 (14<<0) +#define SMA1303_PCM2_SLOT16 (15<<0) + +/* OUTPUT CTRL : 0x09 */ +#define SMA1303_PORT_CONFIG_MASK (3<<5) +#define SMA1303_INPUT_PORT_ONLY (0<<5) +#define SMA1303_OUTPUT_PORT_ENABLE (2<<5) + +#define SMA1303_PORT_OUT_SEL_MASK (7<<0) +#define SMA1303_OUT_SEL_DISABLE (0<<0) +#define SMA1303_FORMAT_CONVERTER (1<<0) +#define SMA1303_MIXER_OUTPUT (2<<0) +#define SMA1303_SPEAKER_PATH (3<<0) +#define SMA1303_POSTSCALER_OUTPUT (4<<0) + +/* BST_TEST : 0x0B */ +#define SMA1303_BST_OFF_SLOPE_MASK (3<<6) +#define SMA1303_BST_OFF_SLOPE_6_7ns (0<<6) +#define SMA1303_BST_OFF_SLOPE_4_8ns (1<<6) +#define SMA1303_BST_OFF_SLOPE_2_6ns (2<<6) +#define SMA1303_BST_OFF_SLOPE_1_2ns (3<<6) + +#define SMA1303_OCP_TEST_MASK (1<<5) +#define SMA1303_OCP_NORMAL_MODE (0<<5) +#define SMA1303_OCP_TEST_MODE (1<<5) + +#define SMA1303_BST_FAST_LEBN_MASK (1<<4) +#define SMA1303_BST_SHORT_LEB (0<<4) +#define SMA1303_BST_LONG_LEB (1<<4) + +#define SMA1303_HIGH_PGAIN_MASK (1<<3) +#define SMA1303_NORMAL_P_GAIN (0<<3) +#define SMA1303_HIGH_P_GAIN (1<<3) + +#define SMA1303_VCOMP_MASK (1<<2) +#define SMA1303_VCOMP_NORMAL_MODE (0<<2) +#define SMA1303_VCOMP_V_MON_MODE (1<<2) + +#define SMA1303_PMOS_ON_MASK (1<<1) +#define SMA1303_PMOS_NORMAL_MODE (0<<1) +#define SMA1303_PMOS_TEST_MODE (1<<1) + +#define SMA1303_NMOS_ON_MASK (1<<0) +#define SMA1303_NMOS_NORMAL_MODE (0<<0) +#define SMA1303_NMOS_TEST_MODE (1<<0) + +/* BST_TEST1 : 0x0C */ +#define SMA1303_SET_OCP_H_MASK (3<<6) +#define SMA1303_HIGH_OCP_4_5_LVL (0<<6) +#define SMA1303_HIGH_OCP_3_2_LVL (1<<6) +#define SMA1303_HIGH_OCP_2_1_LVL (2<<6) +#define SMA1303_HIGH_OCP_0_9_LVL (3<<6) + +#define SMA1303_OCL_TEST_MASK (1<<5) +#define SMA1303_OCL_NORMAL_MODE (0<<5) +#define SMA1303_OCL_TEST_MODE (1<<5) + +#define SMA1303_LOOP_CHECK_MASK (1<<4) +#define SMA1303_BST_LOOP_NORMAL_MODE (0<<4) +#define SMA1303_BST_LOOP_CHECK_MODE (1<<4) + +#define SMA1303_EN_SH_PRT_MASK (1<<3) +#define SMA1303_EN_SH_PRT_DISABLE (0<<3) +#define SMA1303_EN_SH_PRT_ENABLE (1<<3) + +/* SPK_TEST : 0x0D */ +#define SMA1303_VREF_MON_MASK (1<<3) +#define SMA1303_VREF_NORMAL_MODE (0<<3) +#define SMA1303_VREF_V_MON_MODE (1<<3) + +#define SMA1303_SPK_OCP_DLYN_MASK (1<<2) +#define SMA1303_SPK_OCP_LONG_DELAY (0<<2) +#define SMA1303_SPK_OCP_NORMAL (1<<2) + +#define SMA1303_SPK_OFF_SLOPE_MASK (3<<0) +#define SMA1303_SPK_OFF_SLOPE_SLOW (0<<0) +#define SMA1303_SPK_OFF_SLOPE_FAST (3<<0) + +/* MUTE_VOL_CTRL : 0x0E */ +#define SMA1303_VOL_SLOPE_MASK (3<<6) +#define SMA1303_VOL_SLOPE_OFF (0<<6) +#define SMA1303_VOL_SLOPE_SLOW (1<<6) +#define SMA1303_VOL_SLOPE_MID (2<<6) +#define SMA1303_VOL_SLOPE_FAST (3<<6) + +#define SMA1303_MUTE_SLOPE_MASK (3<<4) +#define SMA1303_MUTE_SLOPE_OFF (0<<4) +#define SMA1303_MUTE_SLOPE_SLOW (1<<4) +#define SMA1303_MUTE_SLOPE_MID (2<<4) +#define SMA1303_MUTE_SLOPE_FAST (3<<4) + +#define SMA1303_SPK_MUTE_MASK (1<<0) +#define SMA1303_SPK_UNMUTE (0<<0) +#define SMA1303_SPK_MUTE (1<<0) + +/* SYSTEM_CTRL1 :0x10 */ +#define SMA1303_SPK_MODE_MASK (7<<2) +#define SMA1303_SPK_OFF (0<<2) +#define SMA1303_SPK_MONO (1<<2) +#define SMA1303_SPK_STEREO (4<<2) + +/* SYSTEM_CTRL2 : 0x11 */ +#define SMA1303_SPK_BS_MASK (1<<6) +#define SMA1303_SPK_BS_BYP (0<<6) +#define SMA1303_SPK_BS_EN (1<<6) +#define SMA1303_SPK_LIM_MASK (1<<5) +#define SMA1303_SPK_LIM_BYP (0<<5) +#define SMA1303_SPK_LIM_EN (1<<5) + +#define SMA1303_LR_DATA_SW_MASK (1<<4) +#define SMA1303_LR_DATA_SW_NORMAL (0<<4) +#define SMA1303_LR_DATA_SW_SWAP (1<<4) + +#define SMA1303_MONOMIX_MASK (1<<0) +#define SMA1303_MONOMIX_OFF (0<<0) +#define SMA1303_MONOMIX_ON (1<<0) + +/* SYSTEM_CTRL3 : 0x12 */ +#define SMA1303_INPUT_MASK (3<<6) +#define SMA1303_INPUT_0_DB (0<<6) +#define SMA1303_INPUT_M6_DB (1<<6) +#define SMA1303_INPUT_M12_DB (2<<6) +#define SMA1303_INPUT_INFI_DB (3<<6) +#define SMA1303_INPUT_R_MASK (3<<4) +#define SMA1303_INPUT_R_0_DB (0<<4) +#define SMA1303_INPUT_R_M6_DB (1<<4) +#define SMA1303_INPUT_R_M12_DB (2<<4) +#define SMA1303_INPUT_R_INFI_DB (3<<4) + +/* Modulator : 0x14 */ +#define SMA1303_SPK_HYSFB_MASK (3<<6) +#define SMA1303_HYSFB_625K (0<<6) +#define SMA1303_HYSFB_414K (1<<6) +#define SMA1303_HYSFB_297K (2<<6) +#define SMA1303_HYSFB_226K (3<<6) +#define SMA1303_SPK_BDELAY_MASK (63<<0) + +/* SDM CONTROL : 0x33 */ +#define SMA1303_SDM_Q_SEL_MASK (1<<2) +#define SMA1303_QUART_SEL_1_DIV_4 (0<<2) +#define SMA1303_QUART_SEL_1_DIV_8 (1<<2) + +/* OTP_DATA1 : 0x34 */ +#define SMA1303_OTP_LVL_MASK (1<<5) +#define SMA1303_OTP_LVL_NORMAL (0<<5) +#define SMA1303_OTP_LVL_LOW (1<<5) + +/* PROTECTION : 0x36 */ +#define SMA1303_EDGE_DIS_MASK (1<<7) +#define SMA1303_EDGE_DIS_ENABLE (0<<7) +#define SMA1303_EDGE_DIS_DISABLE (1<<7) + +#define SMA1303_SPK_OCP_DIS_MASK (1<<3) +#define SMA1303_SPK_OCP_ENABLE (0<<3) +#define SMA1303_SPK_OCP_DISABLE (1<<3) + +#define SMA1303_OCP_MODE_MASK (1<<2) +#define SMA1303_AUTO_RECOVER (0<<2) +#define SMA1303_SHUT_DOWN_PERMANENT (1<<2) + +#define SMA1303_OTP_MODE_MASK (3<<0) +#define SMA1303_OTP_MODE_DISABLE (0<<0) +#define SMA1303_IG_THR1_SHUT_THR2 (1<<0) +#define SMA1303_REC_THR1_SHUT_THR2 (2<<0) +#define SMA1303_SHUT_THR1_SHUT_THR2 (3<<0) + +/* TEST2 : 0x3C */ +#define SMA1303_SPK_HSDM_BP_MASK (1<<4) +#define SMA1303_SPK_HSDM_ENABLE (0<<4) +#define SMA1303_SPK_HSDM_BYPASS (1<<4) + +#define SMA1303_SDM_SYNC_DIS_MASK (1<<5) +#define SMA1303_SDM_SYNC_NORMAL (0<<5) +#define SMA1303_SDM_SYNC_DISABLE (1<<5) + +/* ATEST2 : 0x3F */ +#define SMA1303_SPK_OUT_FREQ_MASK (1<<2) +#define SMA1303_SPK_OUT_FREQ_360K (0<<2) +#define SMA1303_SPK_OUT_FREQ_410K (1<<2) + +#define SMA1303_LOW_POWER_MODE_MASK (1<<3) +#define SMA1303_LOW_POWER_MODE_DISABLE (0<<3) +#define SMA1303_LOW_POWER_MODE_ENABLE (1<<3) + +#define SMA1303_THERMAL_ADJUST_MASK (3<<5) +#define SMA1303_THERMAL_150_110 (0<<5) +#define SMA1303_THERMAL_160_120 (1<<5) +#define SMA1303_THERMAL_140_100 (2<<5) + +#define SMA1303_FAST_OFF_DRIVE_SPK_MASK (1<<0) +#define SMA1303_FAST_OFF_DRIVE_SPK_DISABLE (0<<0) +#define SMA1303_FAST_OFF_DRIVE_SPK_ENABLE (1<<0) + +/* PLL_CTRL : 0x8E */ +#define SMA1303_TRM_LVL_MASK (1<<4) +#define SMA1303_TRM_LVL_NORMAL (0<<4) +#define SMA1303_TRM_LVL_LOW (1<<4) + +#define SMA1303_LOW_OCL_MODE_MASK (1<<3) +#define SMA1303_LOW_OCL_MODE (0<<3) +#define SMA1303_NORMAL_OCL_MODE (1<<3) + +#define SMA1303_PLL_PD2_MASK (7<<0) +#define SMA1303_PLL_PD2 (7<<0) +#define SMA1303_PLL_OPERATION2 (0<<0) + +/* POSTSCALER : 0x90 */ +#define SMA1303_BYP_POST_MASK (1<<0) +#define SMA1303_EN_POST_SCALER (0<<0) +#define SMA1303_BYP_POST_SCALER (1<<0) + +/* FDPEC CONTROL : 0x92 */ +#define SMA1303_FLT_VDD_GAIN_MASK (15<<4) +#define SMA1303_FLT_VDD_GAIN_2P40 (0<<4) +#define SMA1303_FLT_VDD_GAIN_2P45 (1<<4) +#define SMA1303_FLT_VDD_GAIN_2P50 (2<<4) +#define SMA1303_FLT_VDD_GAIN_2P55 (3<<4) +#define SMA1303_FLT_VDD_GAIN_2P60 (4<<4) +#define SMA1303_FLT_VDD_GAIN_2P65 (5<<4) +#define SMA1303_FLT_VDD_GAIN_2P70 (6<<4) +#define SMA1303_FLT_VDD_GAIN_2P75 (7<<4) +#define SMA1303_FLT_VDD_GAIN_2P80 (8<<4) +#define SMA1303_FLT_VDD_GAIN_2P85 (9<<4) +#define SMA1303_FLT_VDD_GAIN_2P90 (10<<4) +#define SMA1303_FLT_VDD_GAIN_2P95 (11<<4) +#define SMA1303_FLT_VDD_GAIN_3P00 (12<<4) +#define SMA1303_FLT_VDD_GAIN_3P05 (13<<4) +#define SMA1303_FLT_VDD_GAIN_3P10 (14<<4) +#define SMA1303_FLT_VDD_GAIN_3P15 (15<<4) + +#define SMA1303_DIS_FCHG_MASK (1<<2) +#define SMA1303_EN_FAST_CHARGE (0<<2) +#define SMA1303_DIS_FAST_CHARGE (1<<2) + +/* BOOST_CONTROL4 : 0x97 */ +#define SMA1303_TRM_VBST_MASK (7<<2) +#define SMA1303_TRM_VBST_5P5 (0<<2) +#define SMA1303_TRM_VBST_5P6 (1<<2) +#define SMA1303_TRM_VBST_5P7 (2<<2) +#define SMA1303_TRM_VBST_5P8 (3<<2) +#define SMA1303_TRM_VBST_5P9 (4<<2) +#define SMA1303_TRM_VBST_6P0 (5<<2) +#define SMA1303_TRM_VBST_6P1 (6<<2) +#define SMA1303_TRM_VBST_6P2 (7<<2) + +/* TOP_MAN1 : 0xA2 */ +#define SMA1303_PLL_LOCK_SKIP_MASK (1<<7) +#define SMA1303_PLL_LOCK_ENABLE (0<<7) +#define SMA1303_PLL_LOCK_DISABLE (1<<7) + +#define SMA1303_PLL_PD_MASK (1<<6) +#define SMA1303_PLL_OPERATION (0<<6) +#define SMA1303_PLL_PD (1<<6) + +#define SMA1303_PLL_DIV_MASK (3<<4) +#define SMA1303_PLL_OUT (0<<4) +#define SMA1303_PLL_OUT_2 (1<<4) +#define SMA1303_PLL_OUT_4 (2<<4) +#define SMA1303_PLL_OUT_8 (3<<4) + +#define SMA1303_PLL_REF_CLK_MASK (1<<3) +#define SMA1303_PLL_REF_CLK1 (0<<3) +#define SMA1303_PLL_SCK (1<<3) + +#define SMA1303_DAC_DN_CONV_MASK (1<<2) +#define SMA1303_DAC_DN_CONV_DISABLE (0<<2) +#define SMA1303_DAC_DN_CONV_ENABLE (1<<2) + +#define SMA1303_SDO_IO_MASK (1<<1) +#define SMA1303_HIGH_Z_LRCK_H (0<<1) +#define SMA1303_HIGH_Z_LRCK_L (1<<1) + +#define SMA1303_SDO_OUTPUT2_MASK (1<<0) +#define SMA1303_SDO_NORMAL (0<<0) +#define SMA1303_SDO_OUTPUT_ONLY (1<<0) + +/* TOP_MAN2 : 0xA3 */ +#define SMA1303_MON_OSC_PLL_MASK (1<<7) +#define SMA1303_PLL_SDO (0<<7) +#define SMA1303_OSC_SDO (1<<7) + +#define SMA1303_TEST_CLKO_EN_MASK (1<<6) +#define SMA1303_NORMAL_SDO (0<<6) +#define SMA1303_CLK_OUT_SDO (1<<6) + +#define SMA1303_SDO_OUTPUT_MASK (1<<3) +#define SMA1303_NORMAL_OUT (0<<3) +#define SMA1303_HIGH_Z_OUT (1<<3) + +#define SMA1303_CLOCK_MON_MASK (1<<1) +#define SMA1303_CLOCK_MON (0<<1) +#define SMA1303_CLOCK_NOT_MON (1<<1) + +#define SMA1303_OSC_PD_MASK (1<<0) +#define SMA1303_NORMAL_OPERATION_OSC (0<<0) +#define SMA1303_POWER_DOWN_OSC (1<<0) + +/* TOP_MAN3 0xA4 */ +#define SMA1303_O_FORMAT_MASK (7<<5) +#define SMA1303_O_FMT_LJ (1<<5) +#define SMA1303_O_FMT_I2S (2<<5) +#define SMA1303_O_FMT_TDM (4<<5) + +#define SMA1303_SCK_RATE_MASK (1<<3) +#define SMA1303_SCK_64FS (0<<3) +#define SMA1303_SCK_32FS (2<<3) + +#define SMA1303_LRCK_POL_MASK (1<<0) +#define SMA1303_L_VALID (0<<0) +#define SMA1303_R_VALID (1<<0) + +/* TDM1 FORMAT : 0xA5 */ +#define SMA1303_TDM_CLK_POL_MASK (1<<7) +#define SMA1303_TDM_CLK_POL_RISE (0<<7) +#define SMA1303_TDM_CLK_POL_FALL (1<<7) + +#define SMA1303_TDM_TX_MODE_MASK (1<<6) +#define SMA1303_TDM_TX_MONO (0<<6) +#define SMA1303_TDM_TX_STEREO (1<<6) + +#define SMA1303_TDM_SLOT1_RX_POS_MASK (7<<3) +#define SMA1303_TDM_SLOT1_RX_POS_0 (0<<3) +#define SMA1303_TDM_SLOT1_RX_POS_1 (1<<3) +#define SMA1303_TDM_SLOT1_RX_POS_2 (2<<3) +#define SMA1303_TDM_SLOT1_RX_POS_3 (3<<3) +#define SMA1303_TDM_SLOT1_RX_POS_4 (4<<3) +#define SMA1303_TDM_SLOT1_RX_POS_5 (5<<3) +#define SMA1303_TDM_SLOT1_RX_POS_6 (6<<3) +#define SMA1303_TDM_SLOT1_RX_POS_7 (7<<3) + +#define SMA1303_TDM_SLOT2_RX_POS_MASK (7<<0) +#define SMA1303_TDM_SLOT2_RX_POS_0 (0<<0) +#define SMA1303_TDM_SLOT2_RX_POS_1 (1<<0) +#define SMA1303_TDM_SLOT2_RX_POS_2 (2<<0) +#define SMA1303_TDM_SLOT2_RX_POS_3 (3<<0) +#define SMA1303_TDM_SLOT2_RX_POS_4 (4<<0) +#define SMA1303_TDM_SLOT2_RX_POS_5 (5<<0) +#define SMA1303_TDM_SLOT2_RX_POS_6 (6<<0) +#define SMA1303_TDM_SLOT2_RX_POS_7 (7<<0) + +/* TDM2 FORMAT : 0xA6 */ +#define SMA1303_TDM_DL_MASK (1<<7) +#define SMA1303_TDM_DL_16 (0<<7) +#define SMA1303_TDM_DL_32 (1<<7) + +#define SMA1303_TDM_N_SLOT_MASK (1<<6) +#define SMA1303_TDM_N_SLOT_4 (0<<6) +#define SMA1303_TDM_N_SLOT_8 (1<<6) + +#define SMA1303_TDM_SLOT1_TX_POS_MASK (7<<3) +#define SMA1303_TDM_SLOT1_TX_POS_0 (0<<3) +#define SMA1303_TDM_SLOT1_TX_POS_1 (1<<3) +#define SMA1303_TDM_SLOT1_TX_POS_2 (2<<3) +#define SMA1303_TDM_SLOT1_TX_POS_3 (3<<3) +#define SMA1303_TDM_SLOT1_TX_POS_4 (4<<3) +#define SMA1303_TDM_SLOT1_TX_POS_5 (5<<3) +#define SMA1303_TDM_SLOT1_TX_POS_6 (6<<3) +#define SMA1303_TDM_SLOT1_TX_POS_7 (7<<3) + +#define SMA1303_TDM_SLOT2_TX_POS_MASK (7<<0) +#define SMA1303_TDM_SLOT2_TX_POS_0 (0<<0) +#define SMA1303_TDM_SLOT2_TX_POS_1 (1<<0) +#define SMA1303_TDM_SLOT2_TX_POS_2 (2<<0) +#define SMA1303_TDM_SLOT2_TX_POS_3 (3<<0) +#define SMA1303_TDM_SLOT2_TX_POS_4 (4<<0) +#define SMA1303_TDM_SLOT2_TX_POS_5 (5<<0) +#define SMA1303_TDM_SLOT2_TX_POS_6 (6<<0) +#define SMA1303_TDM_SLOT2_TX_POS_7 (7<<0) + +/* STATUS1 : 0xFA */ +#define SMA1303_OT1_OK_STATUS (1<<7) +#define SMA1303_OT2_OK_STATUS (1<<6) + +/* STATUS2 : 0xFB */ +#define SMA1303_OCP_SPK_STATUS (1<<5) +#define SMA1303_OCP_BST_STATUS (1<<4) +#define SMA1303_OTP_STAT_OK_0 (5<<1) +#define SMA1303_OTP_STAT_OK_1 (2<<2) + +#define SMA1303_CLK_MON_STATUS (1<<0) + +/* DEVICE_INFO : 0xFF */ +#define SMA1303_DEVICE_ID (2<<3) +#define SMA1303_UVLO_BST_STATUS (1<<2) +#define SMA1303_REV_NUM_STATUS (3<<0) +#define SMA1303_REV_NUM_TV0 (0<<0) +#define SMA1303_REV_NUM_TV1 (1<<0) + +#endif From patchwork Mon Jan 9 09:14:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ki-Seok Jo X-Patchwork-Id: 13093175 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 6D813C5479D for ; Mon, 9 Jan 2023 09:16:09 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id A2AC081CE; Mon, 9 Jan 2023 10:15:15 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz A2AC081CE DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1673255765; bh=1Qa3+2GkBbW9EfG6aEy7ULobdXNWd+HsJlqr3jL2HcY=; h=From:To:Subject:Date:In-Reply-To:References:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: Cc:From; b=RGDG2RLhekQS+47naBF5uHFbLdnECFNso3O6+3XbDNdfFSdehK+sKyTyPAP+5btDw PLVeh3Y7shQAJF2rgikI5eiPHuZxaLiI//PoS7rWfOcjfheIWQ02xC2vZo84cuwlfQ +/slcL4DkXAWodikEYcovOmveaohxj2Z14//SUEM= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 5ECF6F804D2; Mon, 9 Jan 2023 10:14:48 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 14EF8F8030F; Mon, 9 Jan 2023 10:14:47 +0100 (CET) Received: from KOR01-PS2-obe.outbound.protection.outlook.com (mail-ps2kor01on2070.outbound.protection.outlook.com [40.107.128.70]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 5D4F3F80245 for ; Mon, 9 Jan 2023 10:14:43 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 5D4F3F80245 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=X68OPrt4rHBAD2d+rX35qzH4X8Pl30kRJzvPUygSoigrw9nIESxova6Hv/FxX8OG26SBkt2AQUx/y3xDXP9uqZIRJiL1PqChZ7OBG90x0Ff0bOwlfVdBFYYra+u18z1x9Stxk4ZMms+BBYmh1NGyO9VjN3OMeZjtAqNHQNbdr86P4CzA1iGqFGSapePQJ5Gy66wFbcI0Rf6flm42LBdiXZqEHOUq6vJDHdKvp6R4ZxL42+ct3KMlpvmcAw/a4uJkLc6WliYzecMO20gWG6/sE2dVCnZlnkKW/omMyK3idQAC4oQGm8QJbJKaTCb7NkNLI87kOHHe3VimufFABPX4+w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=LYbvXoJ2XmLdIJqD74b7ZIzghKUJ3PhvxbyYUmdgF2g=; b=hIVwdsV7gEKm57kmtN6ywxHkDmUS5gkexXaVCdJco/jwZmj4QIEM+e9na7nhSNilw+LB0jCtOhoIHCruuf6zABrK2g6+3NRUvrVWsGj3N/Iu7PTgvNYf4TDPRzgsxRIAdUEONjS4Bqu0A2kxtv2/iZiDkZQNaLJIXjEx96cxzPfqgCIsMLiTISea+m/P6Ohic/4JtSOcf0PS6X16lWBkmq8IXVZuy3OhYYwEyUN1lKQCNa9Js3hTZn/SZoO6lH56q55fg77NBRKV0+hHj22EctYQMvk7Nz0TMDPqYwd2cWlBElxBZO2cVuFO2lWwU1aVweUA4th8Mdcq3EmGbuLUdg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=irondevice.com; dmarc=pass action=none header.from=irondevice.com; dkim=pass header.d=irondevice.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=irondevice.com; Received: from SLXP216MB0077.KORP216.PROD.OUTLOOK.COM (2603:1096:100:7::23) by SLXP216MB0800.KORP216.PROD.OUTLOOK.COM (2603:1096:100:12::18) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5944.19; Mon, 9 Jan 2023 09:14:35 +0000 Received: from SLXP216MB0077.KORP216.PROD.OUTLOOK.COM ([fe80::3d9:7f82:fa73:e727]) by SLXP216MB0077.KORP216.PROD.OUTLOOK.COM ([fe80::3d9:7f82:fa73:e727%7]) with mapi id 15.20.5986.018; Mon, 9 Jan 2023 09:14:35 +0000 From: Kiseok Jo To: Mark Brown Subject: [PATCH v2 2/2] ASoC: dt-bindings: sma1303: Iron Device SMA1303 Amp Date: Mon, 9 Jan 2023 18:14:02 +0900 Message-Id: <20230109091402.11790-4-kiseok.jo@irondevice.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230109091402.11790-3-kiseok.jo@irondevice.com> References: <20230109091402.11790-3-kiseok.jo@irondevice.com> X-ClientProxiedBy: SL2P216CA0115.KORP216.PROD.OUTLOOK.COM (2603:1096:101::12) To SLXP216MB0077.KORP216.PROD.OUTLOOK.COM (2603:1096:100:7::23) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SLXP216MB0077:EE_|SLXP216MB0800:EE_ X-MS-Office365-Filtering-Correlation-Id: 965a4975-2539-4e5c-0e38-08daf221ecdc X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SLXP216MB0077.KORP216.PROD.OUTLOOK.COM; PTR:; CAT:NONE; SFS:(13230022)(376002)(136003)(39830400003)(346002)(396003)(366004)(451199015)(1076003)(6512007)(26005)(6666004)(107886003)(6506007)(86362001)(36756003)(38100700002)(186003)(2616005)(38350700002)(41300700001)(478600001)(316002)(8676002)(4326008)(2906002)(5660300002)(8936002)(44832011)(52116002)(6486002)(966005)(66476007)(6916009)(66556008)(66946007); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: irondevice.com X-MS-Exchange-CrossTenant-Network-Message-Id: 965a4975-2539-4e5c-0e38-08daf221ecdc X-MS-Exchange-CrossTenant-AuthSource: SLXP216MB0077.KORP216.PROD.OUTLOOK.COM X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 09 Jan 2023 09:14:35.1783 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: b4849faa-3337-494e-a76a-cb25a3b3d7d1 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: CIy2XgnvihBHaeU64Q+o2JnhkLaOLVBOs22EEqAnm8HyKQufIws6fbdNEiOkH2vT4lCr/glc+pDS215aC9QOU7IIz5tDqcLJD8hYvspv1xE= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SLXP216MB0800 X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: alsa-devel@alsa-project.org, application@irondevice.com, Kiseok Jo Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Modified the schema binding and added the vendor prefixes. Signed-off-by: Kiseok Jo --- .../bindings/sound/irondevice,sma1303.yaml | 40 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml new file mode 100644 index 000000000000..8c3b85f962ff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/irondevice,sma1303.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Iron Device SMA1303 Audio Amplifier + +maintainers: + - Kiseok Jo + +description: + SMA1303 digital class-D audio amplifier with an integrated boost converter. + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + const: irondevice,sma1303 + + reg: + description: + I2C address of the amplifier. See the datasheet for possible values. + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + #include + i2c_bus { + sma1303_amp: sma1303@1e { + compatible = "irondevice,sma1303"; + reg = <0x1e>; + }; + }; \ No newline at end of file diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 70ffb3780621..271ff119764a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -635,6 +635,8 @@ patternProperties: description: Inverse Path "^iom,.*": description: Iomega Corporation + "^irondevice,.*": + description: Iron Device Corporation "^isee,.*": description: ISEE 2007 S.L. "^isil,.*":