From patchwork Mon Mar 20 21:35:00 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181867 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 640D5C6FD1C for ; Mon, 20 Mar 2023 21:36:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230527AbjCTVgE (ORCPT ); Mon, 20 Mar 2023 17:36:04 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38664 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230452AbjCTVgD (ORCPT ); Mon, 20 Mar 2023 17:36:03 -0400 Received: from mail-ed1-x52d.google.com (mail-ed1-x52d.google.com [IPv6:2a00:1450:4864:20::52d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4331B6A4E; Mon, 20 Mar 2023 14:35:25 -0700 (PDT) Received: by mail-ed1-x52d.google.com with SMTP id h8so52326011ede.8; Mon, 20 Mar 2023 14:35:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348123; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=iaA7NBVMrZmsPW6yrPvN7sDVRCh1/pGYAWSc+tho3oc=; b=JP6xNb6/aBRNMVW7z1+GlK+izHX4lvOr8FQRzh/hI0CWbCmCUVkvTPgpybGFYhOw2s WE8m4UsjMN4+3Y7UNtTX8laGbE88Lo5xXGJE0ZAA3mYnKT7HTafvw0gSyWL6GUEYscm7 qyQY+45cHQsJBQ9pVEXjVWfbima9fkz8qnfBCBYRE5kJb2F11JXh7g1CJsPJFYIFy95O dlsiGtBGipO59fs1Iaep4NX27CPI3icbEsjuYiPLpaRIfD3wY/NDo+ULJph288FwUOQB Q/pSaeQTjJYsRpTxaMFnIYGIgMwOqQ/aPtNpjNQ3N4ipE6KO7sraJSQUg7i8uncG4NnJ hH/A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348123; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=iaA7NBVMrZmsPW6yrPvN7sDVRCh1/pGYAWSc+tho3oc=; b=bDaUeRHfQiU+X3xzb3s2j9ZP6qkj8UmnOpxp4ctzNxQcxmzxXPW2SmPYip1534Rqkk n5odr8XY85PtBaoLNI4bBWk9RZHzC+9w7uMusHvZSJTyOG4zi4Nt2r0lt1kNz983MZEY fvcq4rXrvaa1ev4NsgtXNyRt7+CqLSB9dtDyx5RrZRaePrq3CSvcm03dCNTHwGrl1IQv +jsTnUZMD7atIlNBOuURVw4MwMdueYEdRJHRFjRV/1vepsW90RK7M5V2bEIw6YfTmVvz 12spYnSJEJkNMjhyGfUVIrbOJmcvZP8KUsuGXYZSuCVs7yEManYvpxx2IgIH+IC2IQ5J IwTg== X-Gm-Message-State: AO0yUKUFVIbHzNOax25bzFrUh/cdYr+SxH1Ov5B+LjX5bnEqk19qOCgH AStHja2N+9edoUH0da+YA9Dg+IJA5ls= X-Google-Smtp-Source: AK7set91d0bsoDvXTT2gvnpK4a+8W6sDh86jOXRmRaTj8ONhwFSLkl28UlNXas3+qHr2gcY7/MBSiw== X-Received: by 2002:a17:906:578d:b0:92c:138e:ff1f with SMTP id k13-20020a170906578d00b0092c138eff1fmr532251ejq.18.1679348123144; Mon, 20 Mar 2023 14:35:23 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:22 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 1/9] wifi: rtw88: Clear RTW_FLAG_POWERON early in rtw_mac_power_switch() Date: Mon, 20 Mar 2023 22:35:00 +0100 Message-Id: <20230320213508.2358213-2-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org The SDIO HCI implementation needs to know when the MAC is powered on. This is needed because 32-bit register access has to be split into 4x 8-bit register access when the MAC is not fully powered on or while powering off. When the MAC is powered on 32-bit register access can be used to reduce the number of transfers but splitting into 4x 8-bit register access still works in that case. During the power on sequence is how RTW_FLAG_POWERON is only set when the power on sequence has completed successfully. During power off however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI implementation does not know that it has to use 4x 8-bit register accessors. Clear the RTW_FLAG_POWERON flag early when powering off the MAC so the whole power off sequence is processed with RTW_FLAG_POWERON unset. This will make it possible to use the RTW_FLAG_POWERON flag in the upcoming SDIO HCI implementation. Note that a failure in rtw_pwr_seq_parser() while applying chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON flag being cleared while the chip is still powered on. However, depending on when the failure occurs in the power off sequence the chip may be on or off. Even the original approach of clearing RTW_FLAG_POWERON only when the power off sequence has been applied successfully could end up in some corner case where the chip is powered off but RTW_FLAG_POWERON was not cleared. Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - improve patch description about corner cases when clearing RTW_FLAG_POWERON Changes since v1: - This replaces a previous patch called "rtw88: hci: Add an optional power_switch() callback to rtw_hci_ops" which added a new callback to the HCI ops. drivers/net/wireless/realtek/rtw88/mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index f3a566cf979b..cfdfc8a2c836 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -273,6 +273,9 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) if (pwr_on == cur_pwr) return -EALREADY; + if (!pwr_on) + clear_bit(RTW_FLAG_POWERON, rtwdev->flags); + pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq; ret = rtw_pwr_seq_parser(rtwdev, pwr_seq); if (ret) @@ -280,8 +283,6 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) if (pwr_on) set_bit(RTW_FLAG_POWERON, rtwdev->flags); - else - clear_bit(RTW_FLAG_POWERON, rtwdev->flags); return 0; } From patchwork Mon Mar 20 21:35:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181869 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1AEC7C6FD1C for ; Mon, 20 Mar 2023 21:36:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231163AbjCTVgN (ORCPT ); Mon, 20 Mar 2023 17:36:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39138 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231127AbjCTVgI (ORCPT ); Mon, 20 Mar 2023 17:36:08 -0400 Received: from mail-ed1-x529.google.com (mail-ed1-x529.google.com [IPv6:2a00:1450:4864:20::529]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8C6B07ABA; Mon, 20 Mar 2023 14:35:28 -0700 (PDT) Received: by mail-ed1-x529.google.com with SMTP id cn12so6722938edb.4; Mon, 20 Mar 2023 14:35:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348125; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=WkEZc2r47E6kw29IjPJtYPDvGYh1w4KwIdTyZ6Th/6g=; b=n4ygI8hlObgVngDSrknDRpEEu1HFfnUOUa6DrCA2vqL5WjRzhyPeTNkZIh0C3nBg2H h2rbrLgQsbwbOnpt18hxQqbTNfw+5Xg2DspFlbfgEdeZZGbc3daVWHJXRXMkrN+4bRxM bHow8Ia+ayIt7C0zii/6E+0y6Czg6wuKMOSQkB5UBNpx1C7rfm1IgoMXcGPEi34HjrIK OgNPmWOggegSZIgBOyXh93+g/ELg6Oefux+QMFzi1pqMhkmiazqCtVj+A7sh/Ru1Qcik 4B+BlpzsM4e+vwrUyqZoV2icdpXHkhBTjf5Sc+Jt0g4zLbUcyDlrm8r/l/VN5e8UEoIT 8iRA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348125; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=WkEZc2r47E6kw29IjPJtYPDvGYh1w4KwIdTyZ6Th/6g=; b=XSRube5kB4XYxbvkurX3WWU2GOdxkVFnq5nWHazDqJLaGdQQNIeD0T2kVJwD54hlpk Iiy3gkUTXJGVmJY1zrRcHRJJqW/9HrjbtOWxwUJExiyoA2ppn0cNjqlYaMN74eDDj/EH 4NX1OpYXs+a3EBqgJ4CKjot+f6Pox5ZCiab1iWNN8bT3Cn25IlvIDx1m+HexsAHKjFki HRH6c3eKy0Fu0kdtYE7Z7+NNhQFIxq6wbinGq/0fTYY5KSsiFlbNq+fFr73QTy16QpFY 47kly0Sw1bs0xmOJ6k9P60EMQu4NEI5wbL42w7pIL9C6AsQIOd1BtqZeiJEW4HJjUWP6 r7IA== X-Gm-Message-State: AO0yUKVGKOol01RbPA470dpcuOAChNnUZL6pARdgwToRoY21a7lQoY2H CUlwBBFdlK8JnQ9T4VU9HR2qhdak/kg= X-Google-Smtp-Source: AK7set98bONpKqXrDeZtKJA2FYlE0/Ic2sTH3kI57c3DgQu6uypXOTN3VdUEdqJO/2TgHrLFU/E17Q== X-Received: by 2002:a05:6402:1116:b0:4ac:b528:5727 with SMTP id u22-20020a056402111600b004acb5285727mr1199453edv.1.1679348124284; Mon, 20 Mar 2023 14:35:24 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:23 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 2/9] wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets Date: Mon, 20 Mar 2023 22:35:01 +0100 Message-Id: <20230320213508.2358213-3-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Add a sub-driver for SDIO based chipsets which implements the following functionality: - register accessors for 8, 16 and 32 bits for all states of the card (including usage of 4x 8 bit access for one 32 bit buffer if the card is not fully powered on yet - or if it's fully powered on then 1x 32 bit access is used) - checking whether there's space in the TX FIFO queue to transmit data - transfers from the host to the device for actual network traffic, reserved pages (for firmware download) and H2C (host-to-card) transfers - receiving data from the device - deep power saving state The transmit path is optimized so DMA-capable SDIO host controllers can directly use the buffers provided because the buffer's physical addresses are 8 byte aligned. The receive path is prepared to support RX aggregation where the chipset combines multiple MAC frames into one bigger buffer to reduce SDIO transfer overhead. Co-developed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Reviewed-by: Ulf Hansson Signed-off-by: Martin Blumenstingl --- Changes since v2: - add sdio.h include in patch 2 already (instead of patch 3) as suggested by Larry Finger (thank you!) so the build doesn't break during bisect - move #include "main.h" from sdio.h to sdio.c - sort includes in sdio.c alphabetically as suggested by Ping-Ke (except main.h, which must be included before other rtw88 headers) - don't use memcpy to copy struct ieee80211_rx_status in rtw_sdio_rx_skb() as suggested by Ping-Ke - prevent infinite looping in rtw_sdio_rx_isr() by limiting the number of bytes to process for one interrupt (if more bytes need to be received the interrupt will immediately fire again - tested by limiting to one transfer, which then hurt RX performance a lot as it went down from 19Mbit/s to 0.5Mbit/s). 64k was chosen as it doesn't hurt RX performance and still prevents infinite loops - don't disable RX aggregation for RTL8822CS anymore (either the most recent firmware v9.9.14 had some impact on this or an update of my main AP's firmware improved this) the RX throughput is within 5% regardless of whether RX aggregation is enabled or disabled - fix suspend/resume cycle by enabling MMC_PM_KEEP_POWER in rtw_sdio_suspend() as for example reported by Chris Morgan - fix smatch false positive "uninitialized symbol 'ret'" in rtw_sdio_read_indirect_bytes() by initializing ret to 0 (Ping-Ke suggested that it may be because "it considers 'count = 0' is possible"). Thanks for the suggestion! Changes since v1: - fixed size_t printk format in rtw_sdio_{read,write}_port as reported by the Intel kernel test robot - return -EINVAL from the 11n wcpu case in rtw_sdio_check_free_txpg to fix an uninitialized variable (pages_free) warning as reported by the Intel kernel test robot - rename all int *ret to int *err_ret for better consistency with the sdio_readX functions as suggested by Ping-Ke - fix typos to use "if (!*err_ret ..." (to read the error code) instead of "if (!err_ret ..." (which just checks if a non-null pointer was passed) in rtw_sdio_read_indirect{8,32}) - use a u8 tmp variable for reading the indirect status (BIT(4)) in rtw_sdio_read_indirect32 - change buf[0] to buf[i] in rtw_sdio_read_indirect_bytes - remove stray semicolon after rtw_sdio_get_tx_qsel - add proper BIT_RXDMA_AGG_PG_TH, BIT_DMA_AGG_TO_V1, BIT_HCI_SUS_REQ, BIT_HCI_RESUME_RDY and BIT_SDIO_PAD_E5 macros as suggested by Ping-Ke (thanks for sharing these names!) - use /* ... */ style for copyright comments - don't infinitely loop in rtw_sdio_process_tx_queue and limit the number of skbs to process per queue to 1000 in rtw_sdio_tx_handler - add bus_claim check to rtw_sdio_read_port() so it works similar to rtw_sdio_write_port() (meaning it can be used from interrupt and non interrupt context) - enable RX aggregation on all chips except RTL8822CS (where it hurts RX performance) - use rtw_tx_fill_txdesc_checksum() helper instead of open-coding it - re-use RTW_FLAG_POWERON instead of a new .power_switch callback - added Ulf's Reviewed-by (who had a look at the SDIO specific bits, thank you!) drivers/net/wireless/realtek/rtw88/Kconfig | 3 + drivers/net/wireless/realtek/rtw88/Makefile | 3 + drivers/net/wireless/realtek/rtw88/debug.h | 1 + drivers/net/wireless/realtek/rtw88/mac.c | 1 + drivers/net/wireless/realtek/rtw88/mac.h | 1 - drivers/net/wireless/realtek/rtw88/reg.h | 12 + drivers/net/wireless/realtek/rtw88/sdio.c | 1252 +++++++++++++++++++ drivers/net/wireless/realtek/rtw88/sdio.h | 173 +++ 8 files changed, 1445 insertions(+), 1 deletion(-) create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.c create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.h diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index 651ab56d9c6b..cdf9cb478ee2 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -16,6 +16,9 @@ config RTW88_CORE config RTW88_PCI tristate +config RTW88_SDIO + tristate + config RTW88_USB tristate diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile index fe7293ee87b4..892cad60ba31 100644 --- a/drivers/net/wireless/realtek/rtw88/Makefile +++ b/drivers/net/wireless/realtek/rtw88/Makefile @@ -59,5 +59,8 @@ rtw88_8821cu-objs := rtw8821cu.o obj-$(CONFIG_RTW88_PCI) += rtw88_pci.o rtw88_pci-objs := pci.o +obj-$(CONFIG_RTW88_SDIO) += rtw88_sdio.o +rtw88_sdio-objs := sdio.o + obj-$(CONFIG_RTW88_USB) += rtw88_usb.o rtw88_usb-objs := usb.o diff --git a/drivers/net/wireless/realtek/rtw88/debug.h b/drivers/net/wireless/realtek/rtw88/debug.h index 066792dd96af..a9149c6c2b48 100644 --- a/drivers/net/wireless/realtek/rtw88/debug.h +++ b/drivers/net/wireless/realtek/rtw88/debug.h @@ -24,6 +24,7 @@ enum rtw_debug_mask { RTW_DBG_ADAPTIVITY = 0x00008000, RTW_DBG_HW_SCAN = 0x00010000, RTW_DBG_STATE = 0x00020000, + RTW_DBG_SDIO = 0x00040000, RTW_DBG_ALL = 0xffffffff }; diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index cfdfc8a2c836..2fcba43a6f72 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -7,6 +7,7 @@ #include "reg.h" #include "fw.h" #include "debug.h" +#include "sdio.h" void rtw_set_channel_mac(struct rtw_dev *rtwdev, u8 channel, u8 bw, u8 primary_ch_idx) diff --git a/drivers/net/wireless/realtek/rtw88/mac.h b/drivers/net/wireless/realtek/rtw88/mac.h index 3172aa5ac4de..58c3dccc14bb 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.h +++ b/drivers/net/wireless/realtek/rtw88/mac.h @@ -7,7 +7,6 @@ #define RTW_HW_PORT_NUM 5 #define cut_version_to_mask(cut) (0x1 << ((cut) + 1)) -#define SDIO_LOCAL_OFFSET 0x10250000 #define DDMA_POLLING_COUNT 1000 #define C2H_PKT_BUF 256 #define REPORT_BUF 128 diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h index 8852b24d6c2a..2a2ae2081f34 100644 --- a/drivers/net/wireless/realtek/rtw88/reg.h +++ b/drivers/net/wireless/realtek/rtw88/reg.h @@ -87,6 +87,7 @@ #define BIT_LTE_MUX_CTRL_PATH BIT(26) #define REG_HCI_OPT_CTRL 0x0074 #define BIT_USB_SUS_DIS BIT(8) +#define BIT_SDIO_PAD_E5 BIT(18) #define REG_AFE_CTRL_4 0x0078 #define BIT_CK320M_AFE_EN BIT(4) @@ -185,6 +186,9 @@ (((x) & BIT_MASK_TXDMA_VIQ_MAP) << BIT_SHIFT_TXDMA_VIQ_MAP) #define REG_TXDMA_PQ_MAP 0x010C #define BIT_RXDMA_ARBBW_EN BIT(0) +#define BIT_RXSHFT_EN BIT(1) +#define BIT_RXDMA_AGG_EN BIT(2) +#define BIT_TXDMA_BW_EN BIT(3) #define BIT_SHIFT_TXDMA_BEQ_MAP 8 #define BIT_MASK_TXDMA_BEQ_MAP 0x3 #define BIT_TXDMA_BEQ_MAP(x) \ @@ -283,10 +287,18 @@ #define REG_H2C_TAIL 0x0248 #define REG_H2C_READ_ADDR 0x024C #define REG_H2C_INFO 0x0254 +#define REG_RXDMA_AGG_PG_TH 0x0280 +#define BIT_RXDMA_AGG_PG_TH GENMASK(7, 0) +#define BIT_DMA_AGG_TO_V1 GENMASK(15, 8) +#define BIT_EN_PRE_CALC BIT(29) #define REG_RXPKT_NUM 0x0284 #define BIT_RXDMA_REQ BIT(19) #define BIT_RW_RELEASE BIT(18) #define BIT_RXDMA_IDLE BIT(17) +#define REG_RXDMA_STATUS 0x0288 +#define REG_RXDMA_DPR 0x028C +#define REG_RXDMA_MODE 0x0290 +#define BIT_DMA_MODE BIT(1) #define REG_RXPKTNUM 0x02B0 #define REG_INT_MIG 0x0304 diff --git a/drivers/net/wireless/realtek/rtw88/sdio.c b/drivers/net/wireless/realtek/rtw88/sdio.c new file mode 100644 index 000000000000..fbbd247a6634 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/sdio.c @@ -0,0 +1,1252 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright (C) 2021 Martin Blumenstingl + * Copyright (C) 2021 Jernej Skrabec + * + * Based on rtw88/pci.c: + * Copyright(c) 2018-2019 Realtek Corporation + */ + +#include +#include +#include +#include "main.h" +#include "debug.h" +#include "fw.h" +#include "ps.h" +#include "reg.h" +#include "rx.h" +#include "sdio.h" +#include "tx.h" + +#define RTW_SDIO_INDIRECT_RW_RETRIES 50 + +static bool rtw_sdio_is_bus_addr(u32 addr) +{ + return (addr & RTW_SDIO_BUS_MSK) != 0; +} + +static bool rtw_sdio_bus_claim_needed(struct rtw_sdio *rtwsdio) +{ + return !rtwsdio->irq_thread || + rtwsdio->irq_thread != current; +} + +static u32 rtw_sdio_to_bus_offset(struct rtw_dev *rtwdev, u32 addr) +{ + switch (addr & RTW_SDIO_BUS_MSK) { + case WLAN_IOREG_OFFSET: + addr &= WLAN_IOREG_REG_MSK; + addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_MAC_REG); + break; + case SDIO_LOCAL_OFFSET: + addr &= SDIO_LOCAL_REG_MSK; + addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_SDIO_REG); + break; + default: + rtw_warn(rtwdev, "Cannot convert addr 0x%08x to bus offset", + addr); + } + + return addr; +} + +static bool rtw_sdio_use_32bit_io(struct rtw_dev *rtwdev, u32 addr) +{ + return IS_ALIGNED(addr, 4) && test_bit(RTW_FLAG_POWERON, rtwdev->flags); +} + +static void rtw_sdio_writel(struct rtw_dev *rtwdev, u32 val, u32 addr, + int *err_ret) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + u8 buf[4]; + int i; + + if (rtw_sdio_use_32bit_io(rtwdev, addr)) { + sdio_writel(rtwsdio->sdio_func, val, addr, err_ret); + return; + } + + *(__le32 *)buf = cpu_to_le32(val); + + for (i = 0; i < 4; i++) { + sdio_writeb(rtwsdio->sdio_func, buf[i], addr + i, err_ret); + if (*err_ret) + return; + } +} + +static u32 rtw_sdio_readl(struct rtw_dev *rtwdev, u32 addr, int *err_ret) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + u8 buf[4]; + int i; + + if (rtw_sdio_use_32bit_io(rtwdev, addr)) + return sdio_readl(rtwsdio->sdio_func, addr, err_ret); + + for (i = 0; i < 4; i++) { + buf[i] = sdio_readb(rtwsdio->sdio_func, addr + i, err_ret); + if (*err_ret) + return 0; + } + + return le32_to_cpu(*(__le32 *)buf); +} + +static u8 rtw_sdio_read_indirect8(struct rtw_dev *rtwdev, u32 addr, + int *err_ret) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + u32 reg_cfg, reg_data; + int retry; + u8 tmp; + + reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG); + reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA); + + rtw_sdio_writel(rtwdev, BIT(19) | addr, reg_cfg, err_ret); + if (*err_ret) + return 0; + + for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) { + tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, err_ret); + if (!*err_ret && tmp & BIT(4)) + break; + } + + if (*err_ret) + return 0; + + return sdio_readb(rtwsdio->sdio_func, reg_data, err_ret); +} + +static int rtw_sdio_read_indirect_bytes(struct rtw_dev *rtwdev, u32 addr, + u8 *buf, int count) +{ + int i, ret = 0; + + for (i = 0; i < count; i++) { + buf[i] = rtw_sdio_read_indirect8(rtwdev, addr + i, &ret); + if (ret) + break; + } + + return ret; +} + +static u32 rtw_sdio_read_indirect32(struct rtw_dev *rtwdev, u32 addr, + int *err_ret) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + u32 reg_cfg, reg_data; + int retry; + u8 tmp; + + reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG); + reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA); + + rtw_sdio_writel(rtwdev, BIT(19) | BIT(17) | addr, reg_cfg, err_ret); + if (*err_ret) + return 0; + + for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) { + tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, err_ret); + if (!*err_ret && (tmp & BIT(4))) + break; + } + + if (*err_ret) + return 0; + + return rtw_sdio_readl(rtwdev, reg_data, err_ret); +} + +static u8 rtw_sdio_read8(struct rtw_dev *rtwdev, u32 addr) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool direct, bus_claim; + int ret; + u8 val; + + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + direct = rtw_sdio_is_bus_addr(addr); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + if (direct) { + addr = rtw_sdio_to_bus_offset(rtwdev, addr); + val = sdio_readb(rtwsdio->sdio_func, addr, &ret); + } else { + val = rtw_sdio_read_indirect8(rtwdev, addr, &ret); + } + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio read8 failed (0x%x): %d", addr, ret); + + return val; +} + +static u16 rtw_sdio_read16(struct rtw_dev *rtwdev, u32 addr) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool direct, bus_claim; + u8 buf[2]; + int ret; + u16 val; + + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + direct = rtw_sdio_is_bus_addr(addr); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + if (direct) { + addr = rtw_sdio_to_bus_offset(rtwdev, addr); + buf[0] = sdio_readb(rtwsdio->sdio_func, addr, &ret); + if (!ret) + buf[1] = sdio_readb(rtwsdio->sdio_func, addr + 1, &ret); + val = le16_to_cpu(*(__le16 *)buf); + } else if (addr & 1) { + ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 2); + val = le16_to_cpu(*(__le16 *)buf); + } else { + val = rtw_sdio_read_indirect32(rtwdev, addr, &ret); + } + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio read16 failed (0x%x): %d", addr, ret); + + return val; +} + +static u32 rtw_sdio_read32(struct rtw_dev *rtwdev, u32 addr) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool direct, bus_claim; + u8 buf[4]; + u32 val; + int ret; + + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + direct = rtw_sdio_is_bus_addr(addr); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + if (direct) { + addr = rtw_sdio_to_bus_offset(rtwdev, addr); + val = rtw_sdio_readl(rtwdev, addr, &ret); + } else if (addr & 3) { + ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 4); + val = le32_to_cpu(*(__le32 *)buf); + } else { + val = rtw_sdio_read_indirect32(rtwdev, addr, &ret); + } + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio read32 failed (0x%x): %d", addr, ret); + + return val; +} + +static u32 rtw_sdio_to_write_address(struct rtw_dev *rtwdev, u32 addr) +{ + if (!rtw_sdio_is_bus_addr(addr)) + addr |= WLAN_IOREG_OFFSET; + + return rtw_sdio_to_bus_offset(rtwdev, addr); +} + +static void rtw_sdio_write8(struct rtw_dev *rtwdev, u32 addr, u8 val) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool bus_claim; + int ret; + + addr = rtw_sdio_to_write_address(rtwdev, addr); + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + sdio_writeb(rtwsdio->sdio_func, val, addr, &ret); + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio write8 failed (0x%x): %d", addr, ret); +} + +static void rtw_sdio_write16(struct rtw_dev *rtwdev, u32 addr, u16 val) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool bus_claim; + int ret; + + addr = rtw_sdio_to_write_address(rtwdev, addr); + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + sdio_writeb(rtwsdio->sdio_func, val, addr, &ret); + if (!ret) + sdio_writeb(rtwsdio->sdio_func, val >> 8, addr + 1, &ret); + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio write16 failed (0x%x): %d", addr, ret); +} + +static void rtw_sdio_write32(struct rtw_dev *rtwdev, u32 addr, u32 val) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool bus_claim; + int ret; + + addr = rtw_sdio_to_write_address(rtwdev, addr); + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + rtw_sdio_writel(rtwdev, val, addr, &ret); + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, "sdio write32 failed (0x%x): %d", addr, ret); +} + +static u32 rtw_sdio_get_tx_addr(struct rtw_dev *rtwdev, size_t size, + enum rtw_tx_queue_type queue) +{ + u32 txaddr; + + switch (queue) { + case RTW_TX_QUEUE_BCN: + case RTW_TX_QUEUE_H2C: + case RTW_TX_QUEUE_HI0: + txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_TXFF_HIGH); + break; + case RTW_TX_QUEUE_VI: + case RTW_TX_QUEUE_VO: + txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_TXFF_NORMAL); + break; + case RTW_TX_QUEUE_BE: + case RTW_TX_QUEUE_BK: + txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_TXFF_LOW); + break; + case RTW_TX_QUEUE_MGMT: + txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK, + REG_SDIO_CMD_ADDR_TXFF_EXTRA); + break; + default: + rtw_warn(rtwdev, "Unsupported queue for TX addr: 0x%02x\n", + queue); + return 0; + } + + txaddr += DIV_ROUND_UP(size, 4); + + return txaddr; +}; + +static int rtw_sdio_read_port(struct rtw_dev *rtwdev, u8 *buf, size_t count) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + u32 rxaddr = rtwsdio->rx_addr++; + int ret; + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + ret = sdio_memcpy_fromio(rtwsdio->sdio_func, buf, + RTW_SDIO_ADDR_RX_RX0FF_GEN(rxaddr), count); + if (ret) + rtw_warn(rtwdev, + "Failed to read %zu byte(s) from SDIO port 0x%08x", + count, rxaddr); + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + return ret; +} + +static int rtw_sdio_check_free_txpg(struct rtw_dev *rtwdev, u8 queue, + size_t count) +{ + unsigned int pages_free, pages_needed; + + if (rtw_chip_wcpu_11n(rtwdev)) { + u32 free_txpg; + + free_txpg = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG); + + switch (queue) { + case RTW_TX_QUEUE_BCN: + case RTW_TX_QUEUE_H2C: + case RTW_TX_QUEUE_HI0: + case RTW_TX_QUEUE_MGMT: + /* high */ + pages_free = free_txpg & 0xff; + break; + case RTW_TX_QUEUE_VI: + case RTW_TX_QUEUE_VO: + /* normal */ + pages_free = (free_txpg >> 8) & 0xff; + break; + case RTW_TX_QUEUE_BE: + case RTW_TX_QUEUE_BK: + /* low */ + pages_free = (free_txpg >> 16) & 0xff; + break; + default: + rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue); + return -EINVAL; + } + + /* add the pages from the public queue */ + pages_free += (free_txpg >> 24) & 0xff; + } else { + u32 free_txpg[3]; + + free_txpg[0] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG); + free_txpg[1] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 4); + free_txpg[2] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 8); + + switch (queue) { + case RTW_TX_QUEUE_BCN: + case RTW_TX_QUEUE_H2C: + case RTW_TX_QUEUE_HI0: + /* high */ + pages_free = free_txpg[0] & 0xfff; + break; + case RTW_TX_QUEUE_VI: + case RTW_TX_QUEUE_VO: + /* normal */ + pages_free = (free_txpg[0] >> 16) & 0xfff; + break; + case RTW_TX_QUEUE_BE: + case RTW_TX_QUEUE_BK: + /* low */ + pages_free = free_txpg[1] & 0xfff; + break; + case RTW_TX_QUEUE_MGMT: + /* extra */ + pages_free = free_txpg[2] & 0xfff; + break; + default: + rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue); + return -EINVAL; + } + + /* add the pages from the public queue */ + pages_free += (free_txpg[1] >> 16) & 0xfff; + } + + pages_needed = DIV_ROUND_UP(count, rtwdev->chip->page_size); + + if (pages_needed > pages_free) { + rtw_dbg(rtwdev, RTW_DBG_SDIO, + "Not enough free pages (%u needed, %u free) in queue %u for %zu bytes\n", + pages_needed, pages_free, queue, count); + return -EBUSY; + } + + return 0; +} + +static int rtw_sdio_write_port(struct rtw_dev *rtwdev, struct sk_buff *skb, + enum rtw_tx_queue_type queue) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool bus_claim; + size_t txsize; + u32 txaddr; + int ret; + + txaddr = rtw_sdio_get_tx_addr(rtwdev, skb->len, queue); + if (!txaddr) + return -EINVAL; + + txsize = sdio_align_size(rtwsdio->sdio_func, skb->len); + + ret = rtw_sdio_check_free_txpg(rtwdev, queue, txsize); + if (ret) + return ret; + + if (!IS_ALIGNED((unsigned long)skb->data, RTW_SDIO_DATA_PTR_ALIGN)) + rtw_warn(rtwdev, "Got unaligned SKB in %s() for queue %u\n", + __func__, queue); + + bus_claim = rtw_sdio_bus_claim_needed(rtwsdio); + + if (bus_claim) + sdio_claim_host(rtwsdio->sdio_func); + + ret = sdio_memcpy_toio(rtwsdio->sdio_func, txaddr, skb->data, txsize); + + if (bus_claim) + sdio_release_host(rtwsdio->sdio_func); + + if (ret) + rtw_warn(rtwdev, + "Failed to write %zu byte(s) to SDIO port 0x%08x", + txsize, txaddr); + + return ret; +} + +static void rtw_sdio_init(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + + rtwsdio->irq_mask = REG_SDIO_HIMR_RX_REQUEST | REG_SDIO_HIMR_CPWM1; +} + +static void rtw_sdio_enable_rx_aggregation(struct rtw_dev *rtwdev) +{ + u8 size, timeout; + + if (rtw_chip_wcpu_11n(rtwdev)) { + size = 0x6; + timeout = 0x6; + } else { + size = 0xff; + timeout = 0x1; + } + + /* Make the firmware honor the size limit configured below */ + rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC); + + rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN); + + rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, + FIELD_PREP(BIT_RXDMA_AGG_PG_TH, size) | + FIELD_PREP(BIT_DMA_AGG_TO_V1, timeout)); + + rtw_write8_set(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE); +} + +static void rtw_sdio_enable_interrupt(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + + rtw_write32(rtwdev, REG_SDIO_HIMR, rtwsdio->irq_mask); +} + +static void rtw_sdio_disable_interrupt(struct rtw_dev *rtwdev) +{ + rtw_write32(rtwdev, REG_SDIO_HIMR, 0x0); +} + +static u8 rtw_sdio_get_tx_qsel(struct rtw_dev *rtwdev, struct sk_buff *skb, + u8 queue) +{ + switch (queue) { + case RTW_TX_QUEUE_BCN: + return TX_DESC_QSEL_BEACON; + case RTW_TX_QUEUE_H2C: + return TX_DESC_QSEL_H2C; + case RTW_TX_QUEUE_MGMT: + if (rtw_chip_wcpu_11n(rtwdev)) + return TX_DESC_QSEL_HIGH; + else + return TX_DESC_QSEL_MGMT; + case RTW_TX_QUEUE_HI0: + return TX_DESC_QSEL_HIGH; + default: + return skb->priority; + } +} + +static int rtw_sdio_setup(struct rtw_dev *rtwdev) +{ + /* nothing to do */ + return 0; +} + +static int rtw_sdio_start(struct rtw_dev *rtwdev) +{ + rtw_sdio_enable_rx_aggregation(rtwdev); + rtw_sdio_enable_interrupt(rtwdev); + + return 0; +} + +static void rtw_sdio_stop(struct rtw_dev *rtwdev) +{ + rtw_sdio_disable_interrupt(rtwdev); +} + +static void rtw_sdio_deep_ps_enter(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + bool tx_empty = true; + u8 queue; + + if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE)) { + /* Deep PS state is not allowed to TX-DMA */ + for (queue = 0; queue < RTK_MAX_TX_QUEUE_NUM; queue++) { + /* BCN queue is rsvd page, does not have DMA interrupt + * H2C queue is managed by firmware + */ + if (queue == RTW_TX_QUEUE_BCN || + queue == RTW_TX_QUEUE_H2C) + continue; + + /* check if there is any skb DMAing */ + if (skb_queue_len(&rtwsdio->tx_queue[queue])) { + tx_empty = false; + break; + } + } + } + + if (!tx_empty) { + rtw_dbg(rtwdev, RTW_DBG_PS, + "TX path not empty, cannot enter deep power save state\n"); + return; + } + + set_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags); + rtw_power_mode_change(rtwdev, true); +} + +static void rtw_sdio_deep_ps_leave(struct rtw_dev *rtwdev) +{ + if (test_and_clear_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags)) + rtw_power_mode_change(rtwdev, false); +} + +static void rtw_sdio_deep_ps(struct rtw_dev *rtwdev, bool enter) +{ + if (enter && !test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags)) + rtw_sdio_deep_ps_enter(rtwdev); + + if (!enter && test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags)) + rtw_sdio_deep_ps_leave(rtwdev); +} + +static void rtw_sdio_tx_kick_off(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + + queue_work(rtwsdio->txwq, &rtwsdio->tx_handler_data->work); +} + +static void rtw_sdio_link_ps(struct rtw_dev *rtwdev, bool enter) +{ + /* nothing to do */ +} + +static void rtw_sdio_interface_cfg(struct rtw_dev *rtwdev) +{ + u32 val; + + rtw_read32(rtwdev, REG_SDIO_FREE_TXPG); + + val = rtw_read32(rtwdev, REG_SDIO_TX_CTRL); + val &= 0xfff8; + rtw_write32(rtwdev, REG_SDIO_TX_CTRL, val); +} + +static struct rtw_sdio_tx_data *rtw_sdio_get_tx_data(struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + BUILD_BUG_ON(sizeof(struct rtw_sdio_tx_data) > + sizeof(info->status.status_driver_data)); + + return (struct rtw_sdio_tx_data *)info->status.status_driver_data; +} + +static void rtw_sdio_tx_skb_prepare(struct rtw_dev *rtwdev, + struct rtw_tx_pkt_info *pkt_info, + struct sk_buff *skb, + enum rtw_tx_queue_type queue) +{ + const struct rtw_chip_info *chip = rtwdev->chip; + unsigned long data_addr, aligned_addr; + size_t offset; + u8 *pkt_desc; + + pkt_desc = skb_push(skb, chip->tx_pkt_desc_sz); + + data_addr = (unsigned long)pkt_desc; + aligned_addr = ALIGN(data_addr, RTW_SDIO_DATA_PTR_ALIGN); + + if (data_addr != aligned_addr) { + /* Ensure that the start of the pkt_desc is always aligned at + * RTW_SDIO_DATA_PTR_ALIGN. + */ + offset = RTW_SDIO_DATA_PTR_ALIGN - (aligned_addr - data_addr); + + pkt_desc = skb_push(skb, offset); + + /* By inserting padding to align the start of the pkt_desc we + * need to inform the firmware that the actual data starts at + * a different offset than normal. + */ + pkt_info->offset += offset; + } + + memset(pkt_desc, 0, chip->tx_pkt_desc_sz); + + pkt_info->qsel = rtw_sdio_get_tx_qsel(rtwdev, skb, queue); + + rtw_tx_fill_tx_desc(pkt_info, skb); + rtw_tx_fill_txdesc_checksum(rtwdev, pkt_info, pkt_desc); +} + +static int rtw_sdio_write_data(struct rtw_dev *rtwdev, + struct rtw_tx_pkt_info *pkt_info, + struct sk_buff *skb, + enum rtw_tx_queue_type queue) +{ + int ret; + + rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue); + + ret = rtw_sdio_write_port(rtwdev, skb, queue); + dev_kfree_skb_any(skb); + + return ret; +} + +static int rtw_sdio_write_data_rsvd_page(struct rtw_dev *rtwdev, u8 *buf, + u32 size) +{ + struct rtw_tx_pkt_info pkt_info = {}; + struct sk_buff *skb; + + skb = rtw_tx_write_data_rsvd_page_get(rtwdev, &pkt_info, buf, size); + if (!skb) + return -ENOMEM; + + return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_BCN); +} + +static int rtw_sdio_write_data_h2c(struct rtw_dev *rtwdev, u8 *buf, u32 size) +{ + struct rtw_tx_pkt_info pkt_info = {}; + struct sk_buff *skb; + + skb = rtw_tx_write_data_h2c_get(rtwdev, &pkt_info, buf, size); + if (!skb) + return -ENOMEM; + + return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_H2C); +} + +static int rtw_sdio_tx_write(struct rtw_dev *rtwdev, + struct rtw_tx_pkt_info *pkt_info, + struct sk_buff *skb) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + enum rtw_tx_queue_type queue = rtw_tx_queue_mapping(skb); + struct rtw_sdio_tx_data *tx_data; + + rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue); + + tx_data = rtw_sdio_get_tx_data(skb); + tx_data->sn = pkt_info->sn; + + skb_queue_tail(&rtwsdio->tx_queue[queue], skb); + + return 0; +} + +static void rtw_sdio_tx_err_isr(struct rtw_dev *rtwdev) +{ + u32 val = rtw_read32(rtwdev, REG_TXDMA_STATUS); + + rtw_write32(rtwdev, REG_TXDMA_STATUS, val); +} + +static void rtw_sdio_rx_skb(struct rtw_dev *rtwdev, struct sk_buff *skb, + u32 pkt_offset, struct rtw_rx_pkt_stat *pkt_stat, + struct ieee80211_rx_status *rx_status) +{ + *IEEE80211_SKB_RXCB(skb) = *rx_status; + + if (pkt_stat->is_c2h) { + skb_put(skb, pkt_stat->pkt_len + pkt_offset); + rtw_fw_c2h_cmd_rx_irqsafe(rtwdev, pkt_offset, skb); + return; + } + + skb_put(skb, pkt_stat->pkt_len); + skb_reserve(skb, pkt_offset); + + rtw_rx_stats(rtwdev, pkt_stat->vif, skb); + + ieee80211_rx_irqsafe(rtwdev->hw, skb); +} + +static void rtw_sdio_rxfifo_recv(struct rtw_dev *rtwdev, u32 rx_len) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + const struct rtw_chip_info *chip = rtwdev->chip; + u32 pkt_desc_sz = chip->rx_pkt_desc_sz; + struct ieee80211_rx_status rx_status; + struct rtw_rx_pkt_stat pkt_stat; + struct sk_buff *skb, *split_skb; + u32 pkt_offset, curr_pkt_len; + size_t bufsz; + u8 *rx_desc; + int ret; + + bufsz = sdio_align_size(rtwsdio->sdio_func, rx_len); + + skb = dev_alloc_skb(bufsz); + if (!skb) + return; + + ret = rtw_sdio_read_port(rtwdev, skb->data, bufsz); + if (ret) { + dev_kfree_skb_any(skb); + return; + } + + while (true) { + rx_desc = skb->data; + chip->ops->query_rx_desc(rtwdev, rx_desc, &pkt_stat, + &rx_status); + pkt_offset = pkt_desc_sz + pkt_stat.drv_info_sz + + pkt_stat.shift; + + curr_pkt_len = ALIGN(pkt_offset + pkt_stat.pkt_len, + RTW_SDIO_DATA_PTR_ALIGN); + + if ((curr_pkt_len + pkt_desc_sz) >= rx_len) { + /* Use the original skb (with it's adjusted offset) + * when processing the last (or even the only) entry to + * have it's memory freed automatically. + */ + rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat, + &rx_status); + break; + } + + split_skb = dev_alloc_skb(curr_pkt_len); + if (!split_skb) { + rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat, + &rx_status); + break; + } + + skb_copy_header(split_skb, skb); + memcpy(split_skb->data, skb->data, curr_pkt_len); + + rtw_sdio_rx_skb(rtwdev, split_skb, pkt_offset, &pkt_stat, + &rx_status); + + /* Move to the start of the next RX descriptor */ + skb_reserve(skb, curr_pkt_len); + rx_len -= curr_pkt_len; + } +} + +static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev) +{ + u32 rx_len, total_rx_bytes = 0; + + while (total_rx_bytes < SZ_64K) { + if (rtw_chip_wcpu_11n(rtwdev)) + rx_len = rtw_read16(rtwdev, REG_SDIO_RX0_REQ_LEN); + else + rx_len = rtw_read32(rtwdev, REG_SDIO_RX0_REQ_LEN); + + if (!rx_len) + break; + + rtw_sdio_rxfifo_recv(rtwdev, rx_len); + + total_rx_bytes += rx_len; + } +} + +static void rtw_sdio_handle_interrupt(struct sdio_func *sdio_func) +{ + struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func); + struct rtw_dev *rtwdev = hw->priv; + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + u32 hisr; + + rtwsdio->irq_thread = current; + + hisr = rtw_read32(rtwdev, REG_SDIO_HISR); + + if (hisr & REG_SDIO_HISR_TXERR) + rtw_sdio_tx_err_isr(rtwdev); + if (hisr & REG_SDIO_HISR_RX_REQUEST) { + hisr &= ~REG_SDIO_HISR_RX_REQUEST; + rtw_sdio_rx_isr(rtwdev); + } + + rtw_write32(rtwdev, REG_SDIO_HISR, hisr); + + rtwsdio->irq_thread = NULL; +} + +static int __maybe_unused rtw_sdio_suspend(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct ieee80211_hw *hw = dev_get_drvdata(dev); + struct rtw_dev *rtwdev = hw->priv; + int ret; + + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (ret) + rtw_err(rtwdev, "Failed to host PM flag MMC_PM_KEEP_POWER"); + + return ret; +} + +static int __maybe_unused rtw_sdio_resume(struct device *dev) +{ + return 0; +} + +SIMPLE_DEV_PM_OPS(rtw_sdio_pm_ops, rtw_sdio_suspend, rtw_sdio_resume); +EXPORT_SYMBOL(rtw_sdio_pm_ops); + +static int rtw_sdio_claim(struct rtw_dev *rtwdev, struct sdio_func *sdio_func) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + int ret; + + sdio_claim_host(sdio_func); + + ret = sdio_enable_func(sdio_func); + if (ret) { + rtw_err(rtwdev, "Failed to enable SDIO func"); + goto err_release_host; + } + + ret = sdio_set_block_size(sdio_func, RTW_SDIO_BLOCK_SIZE); + if (ret) { + rtw_err(rtwdev, "Failed to set SDIO block size to 512"); + goto err_disable_func; + } + + rtwsdio->sdio_func = sdio_func; + + rtwsdio->sdio3_bus_mode = mmc_card_uhs(sdio_func->card); + + sdio_set_drvdata(sdio_func, rtwdev->hw); + SET_IEEE80211_DEV(rtwdev->hw, &sdio_func->dev); + + sdio_release_host(sdio_func); + + return 0; + +err_disable_func: + sdio_disable_func(sdio_func); +err_release_host: + sdio_release_host(sdio_func); + return ret; +} + +static void rtw_sdio_declaim(struct rtw_dev *rtwdev, + struct sdio_func *sdio_func) +{ + sdio_claim_host(sdio_func); + sdio_disable_func(sdio_func); + sdio_release_host(sdio_func); +} + +static struct rtw_hci_ops rtw_sdio_ops = { + .tx_write = rtw_sdio_tx_write, + .tx_kick_off = rtw_sdio_tx_kick_off, + .setup = rtw_sdio_setup, + .start = rtw_sdio_start, + .stop = rtw_sdio_stop, + .deep_ps = rtw_sdio_deep_ps, + .link_ps = rtw_sdio_link_ps, + .interface_cfg = rtw_sdio_interface_cfg, + + .read8 = rtw_sdio_read8, + .read16 = rtw_sdio_read16, + .read32 = rtw_sdio_read32, + .write8 = rtw_sdio_write8, + .write16 = rtw_sdio_write16, + .write32 = rtw_sdio_write32, + .write_data_rsvd_page = rtw_sdio_write_data_rsvd_page, + .write_data_h2c = rtw_sdio_write_data_h2c, +}; + +static int rtw_sdio_request_irq(struct rtw_dev *rtwdev, + struct sdio_func *sdio_func) +{ + int ret; + + sdio_claim_host(sdio_func); + ret = sdio_claim_irq(sdio_func, &rtw_sdio_handle_interrupt); + sdio_release_host(sdio_func); + + if (ret) { + rtw_err(rtwdev, "failed to claim SDIO IRQ"); + return ret; + } + + return 0; +} + +static void rtw_sdio_indicate_tx_status(struct rtw_dev *rtwdev, + struct sk_buff *skb) +{ + struct rtw_sdio_tx_data *tx_data = rtw_sdio_get_tx_data(skb); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hw *hw = rtwdev->hw; + + /* enqueue to wait for tx report */ + if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) { + rtw_tx_report_enqueue(rtwdev, skb, tx_data->sn); + return; + } + + /* always ACK for others, then they won't be marked as drop */ + ieee80211_tx_info_clear_status(info); + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED; + else + info->flags |= IEEE80211_TX_STAT_ACK; + + ieee80211_tx_status_irqsafe(hw, skb); +} + +static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev, + enum rtw_tx_queue_type queue) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + struct sk_buff *skb; + int ret; + + skb = skb_dequeue(&rtwsdio->tx_queue[queue]); + if (!skb) + return; + + ret = rtw_sdio_write_port(rtwdev, skb, queue); + if (ret) { + skb_queue_head(&rtwsdio->tx_queue[queue], skb); + return; + } + + if (queue <= RTW_TX_QUEUE_VO) + rtw_sdio_indicate_tx_status(rtwdev, skb); + else + dev_kfree_skb_any(skb); +} + +static void rtw_sdio_tx_handler(struct work_struct *work) +{ + struct rtw_sdio_work_data *work_data = + container_of(work, struct rtw_sdio_work_data, work); + struct rtw_dev *rtwdev = work_data->rtwdev; + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + int limit, queue; + + if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE)) + rtw_sdio_deep_ps_leave(rtwdev); + + for (queue = RTK_MAX_TX_QUEUE_NUM - 1; queue >= 0; queue--) { + for (limit = 0; limit < 1000; limit++) { + rtw_sdio_process_tx_queue(rtwdev, queue); + + if (skb_queue_empty(&rtwsdio->tx_queue[queue])) + break; + } + } +} + +static void rtw_sdio_free_irq(struct rtw_dev *rtwdev, + struct sdio_func *sdio_func) +{ + sdio_release_irq(sdio_func); +} + +static int rtw_sdio_init_tx(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + int i; + + rtwsdio->txwq = create_singlethread_workqueue("rtw88_sdio: tx wq"); + if (!rtwsdio->txwq) { + rtw_err(rtwdev, "failed to create TX work queue\n"); + return -ENOMEM; + } + + for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++) + skb_queue_head_init(&rtwsdio->tx_queue[i]); + rtwsdio->tx_handler_data = kmalloc(sizeof(*rtwsdio->tx_handler_data), + GFP_KERNEL); + if (!rtwsdio->tx_handler_data) + goto err_destroy_wq; + + rtwsdio->tx_handler_data->rtwdev = rtwdev; + INIT_WORK(&rtwsdio->tx_handler_data->work, rtw_sdio_tx_handler); + + return 0; + +err_destroy_wq: + destroy_workqueue(rtwsdio->txwq); + return -ENOMEM; +} + +static void rtw_sdio_deinit_tx(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + int i; + + for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++) + skb_queue_purge(&rtwsdio->tx_queue[i]); + + flush_workqueue(rtwsdio->txwq); + destroy_workqueue(rtwsdio->txwq); + kfree(rtwsdio->tx_handler_data); +} + +int rtw_sdio_probe(struct sdio_func *sdio_func, + const struct sdio_device_id *id) +{ + struct ieee80211_hw *hw; + struct rtw_dev *rtwdev; + int drv_data_size; + int ret; + + drv_data_size = sizeof(struct rtw_dev) + sizeof(struct rtw_sdio); + hw = ieee80211_alloc_hw(drv_data_size, &rtw_ops); + if (!hw) { + dev_err(&sdio_func->dev, "failed to allocate hw"); + return -ENOMEM; + } + + rtwdev = hw->priv; + rtwdev->hw = hw; + rtwdev->dev = &sdio_func->dev; + rtwdev->chip = (struct rtw_chip_info *)id->driver_data; + rtwdev->hci.ops = &rtw_sdio_ops; + rtwdev->hci.type = RTW_HCI_TYPE_SDIO; + + ret = rtw_core_init(rtwdev); + if (ret) + goto err_release_hw; + + rtw_dbg(rtwdev, RTW_DBG_SDIO, + "rtw88 SDIO probe: vendor=0x%04x device=%04x class=%02x", + id->vendor, id->device, id->class); + + ret = rtw_sdio_claim(rtwdev, sdio_func); + if (ret) { + rtw_err(rtwdev, "failed to claim SDIO device"); + goto err_deinit_core; + } + + rtw_sdio_init(rtwdev); + + ret = rtw_sdio_init_tx(rtwdev); + if (ret) { + rtw_err(rtwdev, "failed to init SDIO TX queue\n"); + goto err_sdio_declaim; + } + + ret = rtw_chip_info_setup(rtwdev); + if (ret) { + rtw_err(rtwdev, "failed to setup chip information"); + goto err_destroy_txwq; + } + + ret = rtw_register_hw(rtwdev, hw); + if (ret) { + rtw_err(rtwdev, "failed to register hw"); + goto err_destroy_txwq; + } + + ret = rtw_sdio_request_irq(rtwdev, sdio_func); + if (ret) + goto err_unregister_hw; + + return 0; + +err_unregister_hw: + rtw_unregister_hw(rtwdev, hw); +err_destroy_txwq: + rtw_sdio_deinit_tx(rtwdev); +err_sdio_declaim: + rtw_sdio_declaim(rtwdev, sdio_func); +err_deinit_core: + rtw_core_deinit(rtwdev); +err_release_hw: + ieee80211_free_hw(hw); + + return ret; +} +EXPORT_SYMBOL(rtw_sdio_probe); + +void rtw_sdio_remove(struct sdio_func *sdio_func) +{ + struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func); + struct rtw_dev *rtwdev; + + if (!hw) + return; + + rtwdev = hw->priv; + + rtw_unregister_hw(rtwdev, hw); + rtw_sdio_disable_interrupt(rtwdev); + rtw_sdio_declaim(rtwdev, sdio_func); + rtw_sdio_free_irq(rtwdev, sdio_func); + rtw_sdio_deinit_tx(rtwdev); + rtw_core_deinit(rtwdev); + ieee80211_free_hw(hw); +} +EXPORT_SYMBOL(rtw_sdio_remove); + +void rtw_sdio_shutdown(struct device *dev) +{ + struct sdio_func *sdio_func = dev_to_sdio_func(dev); + struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func); + const struct rtw_chip_info *chip; + struct rtw_dev *rtwdev; + + if (!hw) + return; + + rtwdev = hw->priv; + chip = rtwdev->chip; + + if (chip->ops->shutdown) + chip->ops->shutdown(rtwdev); +} +EXPORT_SYMBOL(rtw_sdio_shutdown); + +MODULE_AUTHOR("Martin Blumenstingl"); +MODULE_AUTHOR("Jernej Skrabec"); +MODULE_DESCRIPTION("Realtek 802.11ac wireless SDIO driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h new file mode 100644 index 000000000000..431907f1354d --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/sdio.h @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* Copyright (C) 2021 Martin Blumenstingl + * Copyright (C) 2021 Jernej Skrabec + */ + +#ifndef __REG_SDIO_H_ +#define __REG_SDIO_H_ + +/* I/O bus domain address mapping */ +#define SDIO_LOCAL_OFFSET 0x10250000 +#define WLAN_IOREG_OFFSET 0x10260000 +#define FIRMWARE_FIFO_OFFSET 0x10270000 +#define TX_HIQ_OFFSET 0x10310000 +#define TX_MIQ_OFFSET 0x10320000 +#define TX_LOQ_OFFSET 0x10330000 +#define TX_EPQ_OFFSET 0x10350000 +#define RX_RX0FF_OFFSET 0x10340000 + +#define RTW_SDIO_BUS_MSK 0xffff0000 +#define SDIO_LOCAL_REG_MSK 0x00000fff +#define WLAN_IOREG_REG_MSK 0x0000ffff + +/* SDIO Tx Control */ +#define REG_SDIO_TX_CTRL (SDIO_LOCAL_OFFSET + 0x0000) + +/*SDIO status timeout*/ +#define REG_SDIO_TIMEOUT (SDIO_LOCAL_OFFSET + 0x0002) + +/* SDIO Host Interrupt Mask */ +#define REG_SDIO_HIMR (SDIO_LOCAL_OFFSET + 0x0014) +#define REG_SDIO_HIMR_RX_REQUEST BIT(0) +#define REG_SDIO_HIMR_AVAL BIT(1) +#define REG_SDIO_HIMR_TXERR BIT(2) +#define REG_SDIO_HIMR_RXERR BIT(3) +#define REG_SDIO_HIMR_TXFOVW BIT(4) +#define REG_SDIO_HIMR_RXFOVW BIT(5) +#define REG_SDIO_HIMR_TXBCNOK BIT(6) +#define REG_SDIO_HIMR_TXBCNERR BIT(7) +#define REG_SDIO_HIMR_BCNERLY_INT BIT(16) +#define REG_SDIO_HIMR_C2HCMD BIT(17) +#define REG_SDIO_HIMR_CPWM1 BIT(18) +#define REG_SDIO_HIMR_CPWM2 BIT(19) +#define REG_SDIO_HIMR_HSISR_IND BIT(20) +#define REG_SDIO_HIMR_GTINT3_IND BIT(21) +#define REG_SDIO_HIMR_GTINT4_IND BIT(22) +#define REG_SDIO_HIMR_PSTIMEOUT BIT(23) +#define REG_SDIO_HIMR_OCPINT BIT(24) +#define REG_SDIO_HIMR_ATIMEND BIT(25) +#define REG_SDIO_HIMR_ATIMEND_E BIT(26) +#define REG_SDIO_HIMR_CTWEND BIT(27) +/* the following two are RTL8188 SDIO Specific */ +#define REG_SDIO_HIMR_MCU_ERR BIT(28) +#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE BIT(29) + +/* SDIO Host Interrupt Service Routine */ +#define REG_SDIO_HISR (SDIO_LOCAL_OFFSET + 0x0018) +#define REG_SDIO_HISR_RX_REQUEST BIT(0) +#define REG_SDIO_HISR_AVAL BIT(1) +#define REG_SDIO_HISR_TXERR BIT(2) +#define REG_SDIO_HISR_RXERR BIT(3) +#define REG_SDIO_HISR_TXFOVW BIT(4) +#define REG_SDIO_HISR_RXFOVW BIT(5) +#define REG_SDIO_HISR_TXBCNOK BIT(6) +#define REG_SDIO_HISR_TXBCNERR BIT(7) +#define REG_SDIO_HISR_BCNERLY_INT BIT(16) +#define REG_SDIO_HISR_C2HCMD BIT(17) +#define REG_SDIO_HISR_CPWM1 BIT(18) +#define REG_SDIO_HISR_CPWM2 BIT(19) +#define REG_SDIO_HISR_HSISR_IND BIT(20) +#define REG_SDIO_HISR_GTINT3_IND BIT(21) +#define REG_SDIO_HISR_GTINT4_IND BIT(22) +#define REG_SDIO_HISR_PSTIMEOUT BIT(23) +#define REG_SDIO_HISR_OCPINT BIT(24) +#define REG_SDIO_HISR_ATIMEND BIT(25) +#define REG_SDIO_HISR_ATIMEND_E BIT(26) +#define REG_SDIO_HISR_CTWEND BIT(27) +/* the following two are RTL8188 SDIO Specific */ +#define REG_SDIO_HISR_MCU_ERR BIT(28) +#define REG_SDIO_HISR_TSF_BIT32_TOGGLE BIT(29) + +/* HCI Current Power Mode */ +#define REG_SDIO_HCPWM (SDIO_LOCAL_OFFSET + 0x0019) +/* RXDMA Request Length */ +#define REG_SDIO_RX0_REQ_LEN (SDIO_LOCAL_OFFSET + 0x001C) +/* OQT Free Page */ +#define REG_SDIO_OQT_FREE_PG (SDIO_LOCAL_OFFSET + 0x001E) +/* Free Tx Buffer Page */ +#define REG_SDIO_FREE_TXPG (SDIO_LOCAL_OFFSET + 0x0020) +/* HCI Current Power Mode 1 */ +#define REG_SDIO_HCPWM1 (SDIO_LOCAL_OFFSET + 0x0024) +/* HCI Current Power Mode 2 */ +#define REG_SDIO_HCPWM2 (SDIO_LOCAL_OFFSET + 0x0026) +/* Free Tx Page Sequence */ +#define REG_SDIO_FREE_TXPG_SEQ (SDIO_LOCAL_OFFSET + 0x0028) +/* HTSF Informaion */ +#define REG_SDIO_HTSFR_INFO (SDIO_LOCAL_OFFSET + 0x0030) +#define REG_SDIO_HCPWM1_V2 (SDIO_LOCAL_OFFSET + 0x0038) +/* H2C */ +#define REG_SDIO_H2C (SDIO_LOCAL_OFFSET + 0x0060) +/* HCI Request Power Mode 1 */ +#define REG_SDIO_HRPWM1 (SDIO_LOCAL_OFFSET + 0x0080) +/* HCI Request Power Mode 2 */ +#define REG_SDIO_HRPWM2 (SDIO_LOCAL_OFFSET + 0x0082) +/* HCI Power Save Clock */ +#define REG_SDIO_HPS_CLKR (SDIO_LOCAL_OFFSET + 0x0084) +/* SDIO HCI Suspend Control */ +#define REG_SDIO_HSUS_CTRL (SDIO_LOCAL_OFFSET + 0x0086) +#define BIT_HCI_SUS_REQ BIT(0) +#define BIT_HCI_RESUME_RDY BIT(1) +/* SDIO Host Extension Interrupt Mask Always */ +#define REG_SDIO_HIMR_ON (SDIO_LOCAL_OFFSET + 0x0090) +/* SDIO Host Extension Interrupt Status Always */ +#define REG_SDIO_HISR_ON (SDIO_LOCAL_OFFSET + 0x0091) + +#define REG_SDIO_INDIRECT_REG_CFG (SDIO_LOCAL_OFFSET + 0x0040) +#define REG_SDIO_INDIRECT_REG_DATA (SDIO_LOCAL_OFFSET + 0x0044) + +/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */ +#define REG_SDIO_CMD_ADDR_MSK GENMASK(16, 13) +#define REG_SDIO_CMD_ADDR_SDIO_REG 0 +#define REG_SDIO_CMD_ADDR_MAC_REG 8 +#define REG_SDIO_CMD_ADDR_TXFF_HIGH 4 +#define REG_SDIO_CMD_ADDR_TXFF_LOW 6 +#define REG_SDIO_CMD_ADDR_TXFF_NORMAL 5 +#define REG_SDIO_CMD_ADDR_TXFF_EXTRA 7 +#define REG_SDIO_CMD_ADDR_RXFF 7 + +#define RTW_SDIO_BLOCK_SIZE 512 +#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id) (0x0e000 | ((_id) & 0x3)) + +#define RTW_SDIO_DATA_PTR_ALIGN 8 + +struct sdio_func; +struct sdio_device_id; + +struct rtw_sdio_tx_data { + u8 sn; +}; + +struct rtw_sdio_work_data { + struct work_struct work; + struct rtw_dev *rtwdev; +}; + +struct rtw_sdio { + struct sdio_func *sdio_func; + + u32 irq_mask; + u8 rx_addr; + bool sdio3_bus_mode; + + void *irq_thread; + + struct workqueue_struct *txwq; + struct rtw_sdio_work_data *tx_handler_data; + struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM]; +}; + +extern const struct dev_pm_ops rtw_sdio_pm_ops; + +int rtw_sdio_probe(struct sdio_func *sdio_func, + const struct sdio_device_id *id); +void rtw_sdio_remove(struct sdio_func *sdio_func); +void rtw_sdio_shutdown(struct device *dev); + +static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + + return rtwsdio->sdio3_bus_mode; +} + +#endif From patchwork Mon Mar 20 21:35:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181870 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8F5EFC761A6 for ; Mon, 20 Mar 2023 21:36:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231182AbjCTVgV (ORCPT ); Mon, 20 Mar 2023 17:36:21 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39260 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230512AbjCTVgJ (ORCPT ); Mon, 20 Mar 2023 17:36:09 -0400 Received: from mail-ed1-x533.google.com (mail-ed1-x533.google.com [IPv6:2a00:1450:4864:20::533]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 123DBA24A; Mon, 20 Mar 2023 14:35:28 -0700 (PDT) Received: by mail-ed1-x533.google.com with SMTP id eg48so52246656edb.13; Mon, 20 Mar 2023 14:35:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348125; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=wCH40GOhGcrwZBpQuXJd0pp0aW1no1xxPydO+tFyDPs=; b=YRCnC7DPQMO2Mv0Zy+0KTWvCEzk3druYDtI7aF7Djuepodl/MWaIB/BeXnm83nCzBz z2OVuvB/pz/QJFTY2WXhVEiQysAy/03+QYVxFNPlSA4Ltti7NtMyPUKTHaDUbNNXQCHq dMngPOv6RQ8xh9+bZNSJrnQptF0dyCdyfwpOTSKpSMEO4RkOdh98/3PJLHYi8RCgUth7 Ur0hOv7qL2TesjmNawOpYlTkC423x4Qod93zwjweM9LiOeyfaTMA4kDzCLrzcP1aUTP/ Btib/6vOTOxjUKSbjy0UelqiAzg/DthfGrPzJUdqPHU88ttYowQDP3M2R1HH6QbQNIPE Wn2w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348125; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=wCH40GOhGcrwZBpQuXJd0pp0aW1no1xxPydO+tFyDPs=; b=3QG4++fZKdp2/NNeg6T/ieBBJVjRmcq4xxgJvATf50JEVZWRctsUfRYw0lWSD4jydb yueiF3/zk1xYZpzy9yYcqsbzhzutW3qL4JkSUGvNspp90aDDfYr27yD2oDQQlLRsNvU9 RoNbVwqLd/f9h22bBT39N4xQiN7GjE49gSmkqjsJ1PIS3k0Hy3AlV8xT2uXu6jjoCjup UEiI3lz/g6DXNkQ8fCOKhkdwO1DUWnT3HPO86WC2VYcxEhvQjOkskSK8UnrJq2IWHp5k Fcn8yz8WjO6xWK5FC/nRAmtGQFNWOtnptFPnt5In6U3M1EQHr9sK0bLyHf+u4YCshRc5 GpjA== X-Gm-Message-State: AO0yUKUPcFty/CahWedI90HNGVoRrAN4Y9/19hxs+5W8LChfv0mDhESt gu4tIv7UGD/tEc+7sNdOhOVKCyMoSK4= X-Google-Smtp-Source: AK7set9luSTY1niuZygkgUfk3kHjcPov9sCX9Hn3+2YPa7Y/WaRDwkJ9QGaa0egvwPvw2jIrFLLE+g== X-Received: by 2002:a17:906:a098:b0:933:12d1:d168 with SMTP id q24-20020a170906a09800b0093312d1d168mr573640ejy.10.1679348125533; Mon, 20 Mar 2023 14:35:25 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:24 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 3/9] wifi: rtw88: mac: Support SDIO specific bits in the power on sequence Date: Mon, 20 Mar 2023 22:35:02 +0100 Message-Id: <20230320213508.2358213-4-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Add the code specific to SDIO HCI in the MAC power on sequence. This is based on the RTL8822BS and RTL8822CS vendor drivers. Co-developed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- - add sdio.h include in patch 2 already (instead of patch 3) as suggested by Larry Finger (thank you!) so the build doesn't break during bisect - only set RTW_FLAG_POWERON when applying the power on sequence was successful (thanks for the suggestion Ping-Ke!) - fix smatch false positive "uninitialized symbol 'imr'" in rtw_mac_power_switch() by initializing imr to 0. Thanks for spotting this and for the suggestion Ping-Ke! Changes since v1: - only access REG_SDIO_HIMR for RTW_HCI_TYPE_SDIO - use proper BIT_HCI_SUS_REQ, BIT_HCI_RESUME_RDY and BIT_SDIO_PAD_E5 macros as suggested by Ping-Ke drivers/net/wireless/realtek/rtw88/mac.c | 47 +++++++++++++++++++++--- 1 file changed, 42 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index 2fcba43a6f72..44e07b61b9b9 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -61,6 +61,7 @@ EXPORT_SYMBOL(rtw_set_channel_mac); static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev) { + unsigned int retry; u32 value32; u8 value8; @@ -78,6 +79,28 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev) case RTW_HCI_TYPE_PCIE: rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_USB_SUS_DIS); break; + case RTW_HCI_TYPE_SDIO: + rtw_write8_clr(rtwdev, REG_SDIO_HSUS_CTRL, BIT_HCI_SUS_REQ); + + for (retry = 0; retry < RTW_PWR_POLLING_CNT; retry++) { + if (rtw_read8(rtwdev, REG_SDIO_HSUS_CTRL) & BIT_HCI_RESUME_RDY) + break; + + usleep_range(10, 50); + } + + if (retry == RTW_PWR_POLLING_CNT) { + rtw_err(rtwdev, "failed to poll REG_SDIO_HSUS_CTRL[1]"); + return -ETIMEDOUT; + } + + if (rtw_sdio_is_sdio30_supported(rtwdev)) + rtw_write8_set(rtwdev, REG_HCI_OPT_CTRL + 2, + BIT_SDIO_PAD_E5 >> 16); + else + rtw_write8_clr(rtwdev, REG_HCI_OPT_CTRL + 2, + BIT_SDIO_PAD_E5 >> 16); + break; case RTW_HCI_TYPE_USB: break; default: @@ -249,6 +272,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) { const struct rtw_chip_info *chip = rtwdev->chip; const struct rtw_pwr_seq_cmd **pwr_seq; + u32 imr = 0; u8 rpwm; bool cur_pwr; int ret; @@ -274,18 +298,24 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) if (pwr_on == cur_pwr) return -EALREADY; + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) { + imr = rtw_read32(rtwdev, REG_SDIO_HIMR); + rtw_write32(rtwdev, REG_SDIO_HIMR, 0); + } + if (!pwr_on) clear_bit(RTW_FLAG_POWERON, rtwdev->flags); pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq; ret = rtw_pwr_seq_parser(rtwdev, pwr_seq); - if (ret) - return ret; - if (pwr_on) + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) + rtw_write32(rtwdev, REG_SDIO_HIMR, imr); + + if (!ret && pwr_on) set_bit(RTW_FLAG_POWERON, rtwdev->flags); - return 0; + return ret; } static int __rtw_mac_init_system_cfg(struct rtw_dev *rtwdev) @@ -456,6 +486,9 @@ static void download_firmware_reg_backup(struct rtw_dev *rtwdev, rtw_write16(rtwdev, REG_FIFOPAGE_INFO_1, 0x200); rtw_write32(rtwdev, REG_RQPN_CTRL_2, bckp[bckp_idx - 1].val); + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) + rtw_read32(rtwdev, REG_SDIO_FREE_TXPG); + /* Disable beacon related functions */ tmp = rtw_read8(rtwdev, REG_BCN_CTRL); bckp[bckp_idx].len = 1; @@ -1068,8 +1101,12 @@ static int txdma_queue_mapping(struct rtw_dev *rtwdev) if (rtw_chip_wcpu_11ac(rtwdev)) rtw_write32(rtwdev, REG_H2CQ_CSR, BIT_H2CQ_FULL); - if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB) + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) { + rtw_read32(rtwdev, REG_SDIO_FREE_TXPG); + rtw_write32(rtwdev, REG_SDIO_TX_CTRL, 0); + } else if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB) { rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_ARBBW_EN); + } return 0; } From patchwork Mon Mar 20 21:35:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181871 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 52D80C6FD1C for ; Mon, 20 Mar 2023 21:36:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231196AbjCTVgc (ORCPT ); Mon, 20 Mar 2023 17:36:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38474 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231142AbjCTVgM (ORCPT ); Mon, 20 Mar 2023 17:36:12 -0400 Received: from mail-ed1-x533.google.com (mail-ed1-x533.google.com [IPv6:2a00:1450:4864:20::533]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B80E3193DF; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) Received: by mail-ed1-x533.google.com with SMTP id o12so52342010edb.9; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348126; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=kQARc2IKQ7J+PNhmSMnJI2VcVwSc/7PMjvPSw/XGItg=; b=LJCwuLzAxZxLiPrLzGrI772iagRWmk9PnHVA3Q7GBd+TFvGiluLCX4s7EO1uXY8r1y bko2VZfbL7iVT7piupZyNQ1KuNH24cR2U4YWbOZPVgKa39M0c+8VTjFIGobu0R+zuFSA 7Vs4T4StDh2mAT1GhaJdXAbKwQ7EZjiNN+zPkr2dgEobH+WWg28MHooxYflCFnFSfe8C b0yX1fhasF+WIS6l1bntiDkf5L4dGPOOnkNwm/ybN5v/NVelQfxm/OA+X54X2s1Gr/xl FnIiLCWx/qypyyGXMZNXViFVAymQprzY6lxsrKPwRhLC9f+DoHG0WRiHbOqbMtk/aRBQ fEuA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348126; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=kQARc2IKQ7J+PNhmSMnJI2VcVwSc/7PMjvPSw/XGItg=; b=Usu7R97C3DFME/EJhw7QAuXDXMfSzRdg9GAJNBhu7pLmaYREn5p3mmhgpiEb1rWzZ+ WI5zW1DqKLtfOnKpj8o97eBvlDQmCj6W7el0MxM/5BUsZyDsVQo4+U0ws2tYKkPt/toa KV0Hdoqn6zkBqy3TJ2PC+k7JkzzSWA450DIr7O8uIsoi2tVdaH8xAvSyYnTTSMV6lFGc uJRjY+FdtHGJHTCVi+nLDQJ436qF7cMNC7+fyLZpLkhJS8xFtjX/LI0/pNkYOjYioqsN 6ctiA3qY6a3wkkIn1Q+vGxjzPSizg8H1k9PeUKf5uzjfu2rz+4eFF/9cXREMkNuucED0 MqPw== X-Gm-Message-State: AO0yUKVPv4X+l8d0wmse0A1Emx0GJvD7r6hOxT0N71LjQHyOYliAD0E6 gS/r+Y6FoG/85WaVf4UZECnR6mdVuW0= X-Google-Smtp-Source: AK7set9ilmj5hTWsAlRs4VvyfMPNn9uUUvq6oLlfN40g/Dhn4vSfV3sVHlwo/MMcpnR98YEgOYBk1A== X-Received: by 2002:aa7:c242:0:b0:500:5627:a20b with SMTP id y2-20020aa7c242000000b005005627a20bmr1095118edo.1.1679348126505; Mon, 20 Mar 2023 14:35:26 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:26 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 4/9] wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsets Date: Mon, 20 Mar 2023 22:35:03 +0100 Message-Id: <20230320213508.2358213-5-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO based chipsets. Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - none Changes since v1: - none drivers/net/wireless/realtek/rtw88/main.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index b2e78737bd5d..cdc4703ead5f 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -18,6 +18,7 @@ #include "debug.h" #include "bf.h" #include "sar.h" +#include "sdio.h" bool rtw_disable_lps_deep_mode; EXPORT_SYMBOL(rtw_disable_lps_deep_mode); @@ -1785,6 +1786,10 @@ static int rtw_chip_parameter_setup(struct rtw_dev *rtwdev) rtwdev->hci.rpwm_addr = 0x03d9; rtwdev->hci.cpwm_addr = 0x03da; break; + case RTW_HCI_TYPE_SDIO: + rtwdev->hci.rpwm_addr = REG_SDIO_HRPWM1; + rtwdev->hci.cpwm_addr = REG_SDIO_HCPWM1_V2; + break; case RTW_HCI_TYPE_USB: rtwdev->hci.rpwm_addr = 0xfe58; rtwdev->hci.cpwm_addr = 0xfe57; From patchwork Mon Mar 20 21:35:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181872 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CA8A0C761AF for ; Mon, 20 Mar 2023 21:36:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231207AbjCTVgd (ORCPT ); Mon, 20 Mar 2023 17:36:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39354 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231138AbjCTVgL (ORCPT ); Mon, 20 Mar 2023 17:36:11 -0400 Received: from mail-ed1-x52a.google.com (mail-ed1-x52a.google.com [IPv6:2a00:1450:4864:20::52a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B744413D54; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) Received: by mail-ed1-x52a.google.com with SMTP id h8so52326584ede.8; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348127; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=pAqmA3HhSn5qzyU/VrL6gyfJOdARmRtdcfXfrm+JOHQ=; b=YJWugPH4B8sEXYvv0rEqr4rN0k6vTyouvs4MfchNdJLwh/S7Z2gfGPfXTA2gvfUjr4 QGxv/dfwDe/jtoo8hkefB1iIob7CGBRzNWtxOCl2agtjEm3A9yP9G/1SrSjF7T+blGaO pFhy18P03jNTnrLOFrv3VNp+DCP/xHGATsxhVLqyG8Op4nQ3ALDw6GBuAowZ02PSq2AV UMq9uaM31GTq8nCric6XwkE7sS2UGlrVnzfZgyXTp3FX5TUCxyMHYu6AxwALYPGPyw16 D6UySlPYHfD0c+pWhiiXUXngitEDz2N/9rP13pWJUOB/p2hmz+vtqbkB52uWKjpM9bcT kp0A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348127; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=pAqmA3HhSn5qzyU/VrL6gyfJOdARmRtdcfXfrm+JOHQ=; b=AK7e2ykwqkxGFF9x2n4PNt+uQ1F02BArjXk2pXCRqLFg1Vy9W3mw5uPhrz0dLSExAf mTg7RgHqs6bb57Fql6GeqvYqIc8WRkwsbLUeigNIhafECe9xAOMLPMKhd9BIeRhRt/6+ 0N8DcaOFrVFiXGKxBJgczWsyV5i9EDzhpgVNLy946EBjFX6gXDsXWpjaEMF8vDmtBG2G 3qS6ihkReNSTA3G+e0L3Nfbywk5N08Tsmmbj9lhNef28HFvjZ0dDmaaGtFnyrcGWl4Fc VV5uNxZuOaAiQZ55OWEsE6mC2SMJZvfZp57vq88QQgJNh2Op1oCDqRzhiTf6S/CJ0eEl Vhsw== X-Gm-Message-State: AO0yUKWYv6Cvo+cC4eQBUUHL1Z+b+vyTISx89Itd16SlqZyM2TbqxiW/ 9CCZsbBm0BwaYh5uSsQLDXFbjMvCixQ= X-Google-Smtp-Source: AK7set/B6rUfC2mkYILiOgAhZQ0AIkRSSjMsgPaNKsldHyMHxGl1Egz8cBSBIrWsZMWaf3Mt9T/MFA== X-Received: by 2002:a05:6402:148e:b0:4fa:4a27:adba with SMTP id e14-20020a056402148e00b004fa4a27adbamr966700edv.22.1679348127539; Mon, 20 Mar 2023 14:35:27 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:27 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 5/9] wifi: rtw88: main: Reserve 8 bytes of extra TX headroom for SDIO cards Date: Mon, 20 Mar 2023 22:35:04 +0100 Message-Id: <20230320213508.2358213-6-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org For SDIO host controllers with DMA support the TX buffer physical memory address need to be aligned at an 8-byte boundary. Reserve 8 bytes of extra TX headroom so we can align the data without re-allocating the transmit buffer. While here, also remove the TODO comment regarding extra headroom for USB and SDIO. For SDIO the extra headroom is now handled and for USB it was not needed so far. Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - none Changes since v1: - none drivers/net/wireless/realtek/rtw88/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index cdc4703ead5f..1cb553485cff 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -2163,9 +2163,11 @@ int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw) int max_tx_headroom = 0; int ret; - /* TODO: USB & SDIO may need extra room? */ max_tx_headroom = rtwdev->chip->tx_pkt_desc_sz; + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) + max_tx_headroom += RTW_SDIO_DATA_PTR_ALIGN; + hw->extra_tx_headroom = max_tx_headroom; hw->queues = IEEE80211_NUM_ACS; hw->txq_data_size = sizeof(struct rtw_txq); From patchwork Mon Mar 20 21:35:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181868 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5E372C7619A for ; Mon, 20 Mar 2023 21:36:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229496AbjCTVgO (ORCPT ); Mon, 20 Mar 2023 17:36:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39252 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230452AbjCTVgI (ORCPT ); Mon, 20 Mar 2023 17:36:08 -0400 Received: from mail-ed1-x52e.google.com (mail-ed1-x52e.google.com [IPv6:2a00:1450:4864:20::52e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B7E5F18AB7; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) Received: by mail-ed1-x52e.google.com with SMTP id b20so19411762edd.1; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348128; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=cIXZMLxx/ubavYAb0x2y+MWgAklULVLiudoNGsi/gKc=; b=FYWoX7tDPL38lqEnew6QDLMyxgNpv+YHllFLrHJmtU57rgtjxLdtzNvY89CaQzTVxY QbPSDjYX9tBYEmPoiRovQln23elACHXUMlD7YzBAQ2e6Zmm/HP1uah1w8XI4DdJ6assj yz9TLQIg4CEbHwVNcJwRimBQc4K+Cfd5V3fkzf+UmTFmJ/6YRGP+EJPnyDC/Bxn/9643 98rh3uwD9CtALydIUCnN7scALnpBzwBAPDRW4KDAcYh4USUjNvifoGcFi1MuU5v8Ei27 1wzlHIoRCDsE27Jy56zSZ6thef7jpm1YRhMgjy9svTzdddQ+fE7eN0sC8dUacybarFhB 2x/A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348128; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=cIXZMLxx/ubavYAb0x2y+MWgAklULVLiudoNGsi/gKc=; b=yYLkuBN66HODi1ZCOskKyb2t/s7KUjgBG9WZy6L63DJtZ0GjB3m5NymNcc966e8wsy yMzGu/kXWUJqN6KshAMWAwxgVmqA6v7YvMCE3NS0J6ZYZNbxozpvqukL0mMCr7jNXuhh hTHP/z1C07ZfinfQyYPbbLKtC1zMdu70Qq5bI9CRtjr7snW53wcHw90kwNT2CwRtL2H4 ghdDc4iRlBOrHppIQ36FrcwTBakFzjm70/BJHqVIYqFcwPjvF9o4vlJDCDH5dVe6y2OB 7m4SZMpvsB5tz2W18jagdJxgCFQPJ/0RZz5sMBSRwqi8yKZ9LqMapp5rBATLUY8q+W1G DYmA== X-Gm-Message-State: AO0yUKVlusyWj2xSVQ5iIKot9zQLYCVusZ67ihEaq3xVNfd7A5FC59yQ zgG9p6JkS+j14r6wBwtPpZ+6KEAaM8k= X-Google-Smtp-Source: AK7set/h1Kuju9OeDuVNsvJ1JURneblLKR4Yr+YpzMoOj1GIhYKvgdGJfzw10O0iiEuLniXxXKk+5Q== X-Received: by 2002:a17:906:7c9:b0:8b2:8876:6a3c with SMTP id m9-20020a17090607c900b008b288766a3cmr490868ejc.29.1679348128499; Mon, 20 Mar 2023 14:35:28 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:28 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 6/9] mmc: sdio: add Realtek SDIO vendor ID and various wifi device IDs Date: Mon, 20 Mar 2023 22:35:05 +0100 Message-Id: <20230320213508.2358213-7-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Add the SDIO vendor ID for Realtek and some device IDs extracted from their GPL vendor driver. This will be useful in the future when the rtw88 driver gains support for these chips. Acked-by: Ulf Hansson Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - none Changes since v1: - Add Ulf's Acked-by (who added: "I assume it's easier if Kalle picks up this patch, along with the series") include/linux/mmc/sdio_ids.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 0e4ef9c5127a..d7cd39a8ad57 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -112,6 +112,15 @@ #define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296 #define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347 +#define SDIO_VENDOR_ID_REALTEK 0x024c +#define SDIO_DEVICE_ID_REALTEK_RTW8723BS 0xb723 +#define SDIO_DEVICE_ID_REALTEK_RTW8723DS 0xd723 +#define SDIO_DEVICE_ID_REALTEK_RTW8821BS 0xb821 +#define SDIO_DEVICE_ID_REALTEK_RTW8821CS 0xc821 +#define SDIO_DEVICE_ID_REALTEK_RTW8821DS 0xd821 +#define SDIO_DEVICE_ID_REALTEK_RTW8822BS 0xb822 +#define SDIO_DEVICE_ID_REALTEK_RTW8822CS 0xc822 + #define SDIO_VENDOR_ID_SIANO 0x039a #define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201 #define SDIO_DEVICE_ID_SIANO_NICE 0x0202 From patchwork Mon Mar 20 21:35:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181873 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D0855C6FD1D for ; Mon, 20 Mar 2023 21:37:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231149AbjCTVhM (ORCPT ); Mon, 20 Mar 2023 17:37:12 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39350 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230450AbjCTVga (ORCPT ); Mon, 20 Mar 2023 17:36:30 -0400 Received: from mail-ed1-x52c.google.com (mail-ed1-x52c.google.com [IPv6:2a00:1450:4864:20::52c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 07B041554A; Mon, 20 Mar 2023 14:35:38 -0700 (PDT) Received: by mail-ed1-x52c.google.com with SMTP id cy23so52242396edb.12; Mon, 20 Mar 2023 14:35:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348129; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Xcee6Xz8r8Flo3g57XPt5CCbkDvJlGcwG5+IRvVtSw0=; b=ZvBgt7EZxDUhII+m81ZtLolKmHjkR3MgtNGKIdeXj0zfy7Mt+VQ36m1+2U9MpzNuLy k9O4RfWxNhmHcnEi+9QyuogJhRjel8v/Z4WHOH6rhWoYNtZXz3gscco9JdkbvwrnofZp ZEUkrsDQC6JBulqSkL+vdMENJ0bFKGJCmUA5vjHhZCOl5AxYHYkyon7wZe/IFYyfprX6 6akclTka2oe3k7IcWS3uMkjiXXxVF7lIbIl6q1pgFP/CjgVpNkK6L0Sr7MUhtCmsLD0C 8B4/jSl4w2cjyb11toaR/gcBPoHqmACTKwMGkAHfwvIURx0aWdiNIwZOneRdi/9+kMWe FbCw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348129; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Xcee6Xz8r8Flo3g57XPt5CCbkDvJlGcwG5+IRvVtSw0=; b=hL/I9mxFzQb9YwkBVs1vyQua6YQWQYqw6287dckxeS+ZhHZLvfNFMQMzG2yWfXLdZZ 4KE7CiRgBLYBdJ99mlouNk35KUR203m2BRX7rw8HOqudIsgWElNnWCTalEy69ZR4VXjf 3cbuMZ245JstX4vNygZCMXzp5OPz1mPUWGv/2z/xNUeQMhs82V9jtxFu7XRf+WdpnOOg /aeO9LzEcdY85CU+LptPJsy5a0kRD5HwN7LgRj6lTmvObiqCEn3BdQq455MHKftdYqJH hWeGC9nUx2JJTdiihOv30l8ssukj3VfvZ8MvD8g7HMMlxtLOaYG9KkilVUmSlMOWbpfi eE7A== X-Gm-Message-State: AO0yUKVEcxXQsf1u8zrSQ9VbR9JOyi0b5mecfsj0f15rEtbvyWHQX50f 5dWoavegrdemjSmhaT4nFydsxWaiGU0= X-Google-Smtp-Source: AK7set+Vw5eEA8z1vlAMmoeB15w4d1gb1sn63IQlubG4Mfy62/gH0MeFYtlfevodH8J2gvxNDYRg6g== X-Received: by 2002:a05:6402:114d:b0:4fe:9374:30d0 with SMTP id g13-20020a056402114d00b004fe937430d0mr906743edw.39.1679348129274; Mon, 20 Mar 2023 14:35:29 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:29 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 7/9] wifi: rtw88: Add support for the SDIO based RTL8822BS chipset Date: Mon, 20 Mar 2023 22:35:06 +0100 Message-Id: <20230320213508.2358213-8-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Jernej Skrabec Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822B chipset code. Signed-off-by: Jernej Skrabec Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - sort includes alphabetically as suggested by Ping-Ke - add missing #include "main.h" (after it has been removed from sdio.h in patch 2 from this series) Changes since v1: - use /* ... */ style for copyright comments drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ .../net/wireless/realtek/rtw88/rtw8822bs.c | 36 +++++++++++++++++++ 3 files changed, 50 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8822bs.c diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index cdf9cb478ee2..0cfc68dcc416 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -45,6 +45,17 @@ config RTW88_8822BE 802.11ac PCIe wireless network adapter +config RTW88_8822BS + tristate "Realtek 8822BS SDIO wireless network adapter" + depends on MMC + select RTW88_CORE + select RTW88_SDIO + select RTW88_8822B + help + Select this option will enable support for 8822BS chipset + + 802.11ac SDIO wireless network adapter + config RTW88_8822BU tristate "Realtek 8822BU USB wireless network adapter" depends on USB diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile index 892cad60ba31..2b8f4dd9707f 100644 --- a/drivers/net/wireless/realtek/rtw88/Makefile +++ b/drivers/net/wireless/realtek/rtw88/Makefile @@ -26,6 +26,9 @@ rtw88_8822b-objs := rtw8822b.o rtw8822b_table.o obj-$(CONFIG_RTW88_8822BE) += rtw88_8822be.o rtw88_8822be-objs := rtw8822be.o +obj-$(CONFIG_RTW88_8822BS) += rtw88_8822bs.o +rtw88_8822bs-objs := rtw8822bs.o + obj-$(CONFIG_RTW88_8822BU) += rtw88_8822bu.o rtw88_8822bu-objs := rtw8822bu.o diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822bs.c b/drivers/net/wireless/realtek/rtw88/rtw8822bs.c new file mode 100644 index 000000000000..31d8645f83bd --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/rtw8822bs.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) Jernej Skrabec + */ + +#include +#include +#include +#include "main.h" +#include "rtw8822b.h" +#include "sdio.h" + +static const struct sdio_device_id rtw_8822bs_id_table[] = { + { + SDIO_DEVICE(SDIO_VENDOR_ID_REALTEK, + SDIO_DEVICE_ID_REALTEK_RTW8822BS), + .driver_data = (kernel_ulong_t)&rtw8822b_hw_spec, + }, + {} +}; +MODULE_DEVICE_TABLE(sdio, rtw_8822bs_id_table); + +static struct sdio_driver rtw_8822bs_driver = { + .name = "rtw_8822bs", + .probe = rtw_sdio_probe, + .remove = rtw_sdio_remove, + .id_table = rtw_8822bs_id_table, + .drv = { + .pm = &rtw_sdio_pm_ops, + .shutdown = rtw_sdio_shutdown, + } +}; +module_sdio_driver(rtw_8822bs_driver); + +MODULE_AUTHOR("Jernej Skrabec "); +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8822bs driver"); +MODULE_LICENSE("Dual BSD/GPL"); From patchwork Mon Mar 20 21:35:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181874 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E920BC7619A for ; Mon, 20 Mar 2023 21:37:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229571AbjCTVhO (ORCPT ); Mon, 20 Mar 2023 17:37:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38474 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231189AbjCTVgb (ORCPT ); Mon, 20 Mar 2023 17:36:31 -0400 Received: from mail-ed1-x52f.google.com (mail-ed1-x52f.google.com [IPv6:2a00:1450:4864:20::52f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 76C79BBA5; Mon, 20 Mar 2023 14:35:41 -0700 (PDT) Received: by mail-ed1-x52f.google.com with SMTP id ek18so52364957edb.6; Mon, 20 Mar 2023 14:35:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348130; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=F1r8IjJwVIyRWtJhcwsAyFjYCs6VABNRosrxGLP+PNA=; b=JAO+/xDul1UqdTrsgq1ezgAPvwZODfz33KEcngijCvHOWqmptK/a+O+aGWQC2fVcF7 Satva22kFofbyQ2oTtsmdmq9sWh7cAIT26UMO6XDuIhgoX2gPAjtuvSOukfBUb6igPol 0SzhSsYUqONO9bFP8Se4AKoUokVBtEbmZzaz5x7JqB9h+lN16bWPhriE9+PNI0O3UaS1 GY8+MefHIBaaKKn+tt/guJh0k8RRhAKQqLo8kSfX8s2+zGSafcIQaxTCI4R7xl81FH1D OkvWlvjfroGj+YKxqaMqs/HLlzbQMUNzlZe4WzBRQchF7XyjJKvbzdT4IGwhBg7a+oDl gdPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348130; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=F1r8IjJwVIyRWtJhcwsAyFjYCs6VABNRosrxGLP+PNA=; b=0pazq9O+HT7HPeMMU7w6CVRl/wZowP2ucxvuRk/MV3BBj4EatPOSxvzZqkUfsu5AA2 CLKc4mlipKy4EZddB3b/17Iq2KR8+XOqQkocH0QzTll2hrlc+DvO8IzampAHoK0V/UuS EQ42GwloFI4aD4s6Vvrf8gUkXdv1HA4s2e0uTA/W7IUGs2XWL7y0HoW7jMFsBYC4/+tR ChQ14lxP23Tl55+56zNCBp08dZQ29YJbE2laIEBP5FHa4v5yHLSU/h2iq2qLx43sbSwh tlw89Osq3cqWNf/aP9SwYEwe8BJFPia0sg87Csru04m6hH9CH40kOXsp2+10qvA1j/6k tyaQ== X-Gm-Message-State: AO0yUKUHUT5EEyVZTm6y1MlelLj5d38t0CpJPV5F0d5KL2z/pJzXWNGv vsMn3QXZZRD2YeRqpyBlhx//xw+Vyds= X-Google-Smtp-Source: AK7set89jB29vPYJBUi6sTdIZt2LaEw3MvMELFUf0ob23Y3NoiU65FcUExIlvQbnKfCIrlk2D2s8tQ== X-Received: by 2002:aa7:d4d9:0:b0:4fe:961d:cab0 with SMTP id t25-20020aa7d4d9000000b004fe961dcab0mr1063560edr.5.1679348130257; Mon, 20 Mar 2023 14:35:30 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:29 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 8/9] wifi: rtw88: Add support for the SDIO based RTL8822CS chipset Date: Mon, 20 Mar 2023 22:35:07 +0100 Message-Id: <20230320213508.2358213-9-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822C chipset code. Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - sort includes alphabetically as suggested by Ping-Ke - add missing #include "main.h" (after it has been removed from sdio.h in patch 2 from this series) Changes since v1: - use /* ... */ style for copyright comments drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ .../net/wireless/realtek/rtw88/rtw8822cs.c | 36 +++++++++++++++++++ 3 files changed, 50 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8822cs.c diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index 0cfc68dcc416..6b65da81127f 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -78,6 +78,17 @@ config RTW88_8822CE 802.11ac PCIe wireless network adapter +config RTW88_8822CS + tristate "Realtek 8822CS SDIO wireless network adapter" + depends on MMC + select RTW88_CORE + select RTW88_SDIO + select RTW88_8822C + help + Select this option will enable support for 8822CS chipset + + 802.11ac SDIO wireless network adapter + config RTW88_8822CU tristate "Realtek 8822CU USB wireless network adapter" depends on USB diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile index 2b8f4dd9707f..6105c2745bda 100644 --- a/drivers/net/wireless/realtek/rtw88/Makefile +++ b/drivers/net/wireless/realtek/rtw88/Makefile @@ -38,6 +38,9 @@ rtw88_8822c-objs := rtw8822c.o rtw8822c_table.o obj-$(CONFIG_RTW88_8822CE) += rtw88_8822ce.o rtw88_8822ce-objs := rtw8822ce.o +obj-$(CONFIG_RTW88_8822CS) += rtw88_8822cs.o +rtw88_8822cs-objs := rtw8822cs.o + obj-$(CONFIG_RTW88_8822CU) += rtw88_8822cu.o rtw88_8822cu-objs := rtw8822cu.o diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822cs.c b/drivers/net/wireless/realtek/rtw88/rtw8822cs.c new file mode 100644 index 000000000000..975e81c824f2 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/rtw8822cs.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) Martin Blumenstingl + */ + +#include +#include +#include +#include "main.h" +#include "rtw8822c.h" +#include "sdio.h" + +static const struct sdio_device_id rtw_8822cs_id_table[] = { + { + SDIO_DEVICE(SDIO_VENDOR_ID_REALTEK, + SDIO_DEVICE_ID_REALTEK_RTW8822CS), + .driver_data = (kernel_ulong_t)&rtw8822c_hw_spec, + }, + {} +}; +MODULE_DEVICE_TABLE(sdio, rtw_8822cs_id_table); + +static struct sdio_driver rtw_8822cs_driver = { + .name = "rtw_8822cs", + .probe = rtw_sdio_probe, + .remove = rtw_sdio_remove, + .id_table = rtw_8822cs_id_table, + .drv = { + .pm = &rtw_sdio_pm_ops, + .shutdown = rtw_sdio_shutdown, + } +}; +module_sdio_driver(rtw_8822cs_driver); + +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8822cs driver"); +MODULE_LICENSE("Dual BSD/GPL"); From patchwork Mon Mar 20 21:35:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 13181875 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DC8E2C6FD1C for ; Mon, 20 Mar 2023 21:37:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229992AbjCTVhd (ORCPT ); Mon, 20 Mar 2023 17:37:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40766 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230357AbjCTVgx (ORCPT ); Mon, 20 Mar 2023 17:36:53 -0400 Received: from mail-ed1-x530.google.com (mail-ed1-x530.google.com [IPv6:2a00:1450:4864:20::530]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 644D426CFC; Mon, 20 Mar 2023 14:35:45 -0700 (PDT) Received: by mail-ed1-x530.google.com with SMTP id x3so52293313edb.10; Mon, 20 Mar 2023 14:35:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20210112; t=1679348131; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=LRUPutZwNWZYPrEdHD3f1bxNn6Sbt826jZtmdfwtuO4=; b=EZaHlDkDdBUQlLo202RLsbkBx+FqP9Je3xgomDebJzgbmwZjIND/+H7gqyF4g+5SUH JqdvcUWhhGCXLci2T67q6gOsAjkpKhXDihEqMe5IlUp/I/V67XF832TbnqTmG/Kb8tgq 53xlKqfsMTvUg9a+0k6Z/RW9NVOdwLQZ8tzuSgJRJxMDk7RUHTYU8qyo7O8e/IWP+Ltb K33vf9rvW4xKB8tuhfLS/dx6n5L4J6bOyu6BnV/JbaJmZICBEUWhwY53YHbV5ns6hv4U eCEnVoUm0fBddpJWFURJjtFjkP4f8UbUM3asKuDCBcFv+mb3JEwrkRR4p7qxWz7fsMek /iDA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679348131; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=LRUPutZwNWZYPrEdHD3f1bxNn6Sbt826jZtmdfwtuO4=; b=CbuLkeQUolnCYEz9HThP5dQJZkmTfw5Gtt2kMKka/Hurm0CYQVy0VUJbZNRDarMD1k le4yIofMNpcdRTJinV6DBQRpdkiKZxVBTLPxAGwLrpStZmod5/qSNC05tPHXUTn5Z4Oy 35efDROxWYYDdeCuIeEUGPuX4m8TVfam1h5qsNDIWjz7docW6RPVshFNd530dJf7xXdo a5T8XAAH9i0YuK3+3XA+EQEFqSORmRxNJovcv8FOM+g0SRZrbpWnULyFg7O6dJOkSVQi X97Sy9Y1pqN3mPGPY1uIdAx8b2BAUozwLdiU1anEmnDn69oSxCfa5suxSP8fXHCtPQp5 JtLQ== X-Gm-Message-State: AO0yUKUQ4d+uTyIQIBejOmHNbXnyZEiuTwePytrH0bpQoyJluCcCA+x0 VKhZE59ef9fjEUHlLeFD8fnzv9h391s= X-Google-Smtp-Source: AK7set/taZhkIbhZ6VFy8gpVNGzgOUL+BlWY2PH1Hl9PmB/za6a2jleDoLUChmhenKP5msWXNsyFMw== X-Received: by 2002:aa7:c242:0:b0:500:5627:a20b with SMTP id y2-20020aa7c242000000b005005627a20bmr1095338edo.1.1679348131208; Mon, 20 Mar 2023 14:35:31 -0700 (PDT) Received: from localhost.localdomain (dynamic-2a01-0c22-73dd-8200-0000-0000-0000-0e63.c22.pool.telefonica.de. [2a01:c22:73dd:8200::e63]) by smtp.googlemail.com with ESMTPSA id z17-20020a5096d1000000b004aee4e2a56esm5413201eda.0.2023.03.20.14.35.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Mar 2023 14:35:30 -0700 (PDT) From: Martin Blumenstingl To: linux-wireless@vger.kernel.org Cc: Yan-Hsuan Chuang , Kalle Valo , Ulf Hansson , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mmc@vger.kernel.org, Chris Morgan , Nitin Gupta , Neo Jou , Pkshih , Jernej Skrabec , Larry Finger , Martin Blumenstingl Subject: [PATCH v3 9/9] wifi: rtw88: Add support for the SDIO based RTL8821CS chipset Date: Mon, 20 Mar 2023 22:35:08 +0100 Message-Id: <20230320213508.2358213-10-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> References: <20230320213508.2358213-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih --- Changes since v2: - sort includes alphabetically as suggested by Ping-Ke - add missing #include "main.h" (after it has been removed from sdio.h in patch 2 from this series) Changes since v1: - use /* ... */ style for copyright comments drivers/net/wireless/realtek/rtw88/Kconfig | 11 ++++++ drivers/net/wireless/realtek/rtw88/Makefile | 3 ++ .../net/wireless/realtek/rtw88/rtw8821cs.c | 36 +++++++++++++++++++ 3 files changed, 50 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8821cs.c diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index 6b65da81127f..29eb2f8e0eb7 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -133,6 +133,17 @@ config RTW88_8821CE 802.11ac PCIe wireless network adapter +config RTW88_8821CS + tristate "Realtek 8821CS SDIO wireless network adapter" + depends on MMC + select RTW88_CORE + select RTW88_SDIO + select RTW88_8821C + help + Select this option will enable support for 8821CS chipset + + 802.11ac SDIO wireless network adapter + config RTW88_8821CU tristate "Realtek 8821CU USB wireless network adapter" depends on USB diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile index 6105c2745bda..82979b30ae8d 100644 --- a/drivers/net/wireless/realtek/rtw88/Makefile +++ b/drivers/net/wireless/realtek/rtw88/Makefile @@ -59,6 +59,9 @@ rtw88_8821c-objs := rtw8821c.o rtw8821c_table.o obj-$(CONFIG_RTW88_8821CE) += rtw88_8821ce.o rtw88_8821ce-objs := rtw8821ce.o +obj-$(CONFIG_RTW88_8821CS) += rtw88_8821cs.o +rtw88_8821cs-objs := rtw8821cs.o + obj-$(CONFIG_RTW88_8821CU) += rtw88_8821cu.o rtw88_8821cu-objs := rtw8821cu.o diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821cs.c b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c new file mode 100644 index 000000000000..a359413369a4 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/rtw8821cs.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) Martin Blumenstingl + */ + +#include +#include +#include +#include "main.h" +#include "rtw8821c.h" +#include "sdio.h" + +static const struct sdio_device_id rtw_8821cs_id_table[] = { + { + SDIO_DEVICE(SDIO_VENDOR_ID_REALTEK, + SDIO_DEVICE_ID_REALTEK_RTW8821CS), + .driver_data = (kernel_ulong_t)&rtw8821c_hw_spec, + }, + {} +}; +MODULE_DEVICE_TABLE(sdio, rtw_8821cs_id_table); + +static struct sdio_driver rtw_8821cs_driver = { + .name = "rtw_8821cs", + .probe = rtw_sdio_probe, + .remove = rtw_sdio_remove, + .id_table = rtw_8821cs_id_table, + .drv = { + .pm = &rtw_sdio_pm_ops, + .shutdown = rtw_sdio_shutdown, + } +}; +module_sdio_driver(rtw_8821cs_driver); + +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_DESCRIPTION("Realtek 802.11ac wireless 8821cs driver"); +MODULE_LICENSE("Dual BSD/GPL");