From patchwork Tue Mar 21 19:30:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13183119 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 0F23FC6FD1D for ; Tue, 21 Mar 2023 19:31:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=xxRv3+yScP9T4KeJ327yy02wwlvGXLf1AiHcKCJsPHg=; b=xdEia4ci49ykuY qxSnNyUWxujihLGnSHMoIV0fiRP/NTTESW2TylC6DUdl7eau87d4Nd+imvlHhz/gpJPcXP1o4kneP Ko/yqS0U3RTRjRZeoYDZBK7fDaSivziWXD+mg5johOEgYSlRodWFBY8k5wPhl/xwOMYViWEO7k0fj 6rs5mgOXce8avyIAjk7Iz332GdehRq57M3G1bs3drfcSO7hw0ccAsIYfQ/JlUiXYI6sJaoxRoGtZx 7Z2dQ+65MkjvT7v2+6iNlyJzkSdOTgEUehbKYvKTpsVzRXHbCHBYjk521SIyGR9s/aDRioh8gNuA6 ZbCYvgqQf8VQaJHnIpAA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pehh5-00DTwJ-2o; Tue, 21 Mar 2023 19:30:51 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pehgp-00DTmg-2G; Tue, 21 Mar 2023 19:30:40 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id B86775FD3D; Tue, 21 Mar 2023 22:30:24 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1679427024; bh=qcIGKcZIb5cUrNAdB7ZZAIiITgzMPRGFSQuzjV413Y4=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=UsIvXc7GE2sFgOIhe+SbL1ZCYi761DUAwVVtSKFWy6/oguNAgD0LpBMhkliRP/Eev 9ydOw3TuAIYMipDNJyrPnapgnt1UauUEW1fd+7CGYWWGMXAnEQ0zVNRfYpGX88/bTH cOwu1pTKUWCnCFAebPAos6MK1DPsmdO/hSiGpNzD6bDeIvcsj/0SuWmT+IzfKZE4e5 Z/EPGbGijL5dtfPXuNGJLyjwPN7niqv/60sn8J+YauLebG6USZ333/jLBlKKXzaZmE GYyBThA9MOEsaEIpW2yJ+Ga8seugnN7nEYxLbqUHUJkaeTVVXWfKzpcH9JlXztW0DH EOeDS6CASiHUg== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Tue, 21 Mar 2023 22:30:24 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v11 1/5] clk: meson: make pll rst bit as optional Date: Tue, 21 Mar 2023 22:30:10 +0300 Message-ID: <20230321193014.26349-2-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230321193014.26349-1-ddrokosov@sberdevices.ru> References: <20230321193014.26349-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/21 14:08:00 #20985970 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230321_123036_406312_E4A1FC3D X-CRM114-Status: GOOD ( 13.40 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org Compared with the previous SoCs, self-adaption current module is newly added for A1, and there is no reset parameter except the fixed pll. Since we use clk-pll generic driver for A1 pll implementation, rst bit should be optional to support new behavior. Signed-off-by: Jian Hu Acked-by: Martin Blumenstingl Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/clk-pll.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index afefeba6e458..314ca945a4d0 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -295,10 +295,14 @@ static int meson_clk_pll_init(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); if (pll->init_count) { - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); + regmap_multi_reg_write(clk->map, pll->init_regs, pll->init_count); - meson_parm_write(clk->map, &pll->rst, 0); + + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); } return 0; @@ -309,8 +313,11 @@ static int meson_clk_pll_is_enabled(struct clk_hw *hw) struct clk_regmap *clk = to_clk_regmap(hw); struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); - if (meson_parm_read(clk->map, &pll->rst) || - !meson_parm_read(clk->map, &pll->en) || + if (MESON_PARM_APPLICABLE(&pll->rst) && + meson_parm_read(clk->map, &pll->rst)) + return 0; + + if (!meson_parm_read(clk->map, &pll->en) || !meson_parm_read(clk->map, &pll->l)) return 0; @@ -341,13 +348,15 @@ static int meson_clk_pll_enable(struct clk_hw *hw) return 0; /* Make sure the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Enable the pll */ meson_parm_write(clk->map, &pll->en, 1); /* Take the pll out reset */ - meson_parm_write(clk->map, &pll->rst, 0); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); if (meson_clk_pll_wait_lock(hw)) return -EIO; @@ -361,7 +370,8 @@ static void meson_clk_pll_disable(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); /* Put the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); From patchwork Tue Mar 21 19:30:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13183117 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 6B5AFC6FD20 for ; Tue, 21 Mar 2023 19:30:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=3woxTpJWHCZMKRfjSM7Sw7mD3QT5dVFFgnB2PUNViZ8=; b=SsGWLVqixudrhp +a1i5Tucxa6PsiiqX5kveBHfHIoxZZXicAHYpHpUH+oEZmyavBg8nHD8blMPEgZ1KeMF9kuVb3Uzl e/AsOdutchOnd7s6vB9Juyvr48x2RTOSQ9e6SMuFAms/5YS7DbhEn5w+iM7NRTmdqERoT/5XJR364 shucdAlM1YobPT5mgbGs2xfvhm/h8rmeAHt/7sveD5Hwi4sUd4pvjljEZssgHWAtPHMbJtRbIU3MB VFYFwa4owO4cy7n5auGhOyTy8/o1U1I0Mn0kbQbu0zBCJNYRGk4Hbg0NT51Gjlb/2z0QdtsoAGyhM 7ITcchNYdrr67QWCkf7g==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pehgx-00DTtt-1B; Tue, 21 Mar 2023 19:30:43 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pehgp-00DTmv-2G; Tue, 21 Mar 2023 19:30:40 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 9F2925FD3E; Tue, 21 Mar 2023 22:30:26 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1679427026; bh=QACcL2z5H0WiVPZBqWtG1qVoEZA/+FwC6rxiZKbXGhQ=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=CTLOxJuC8Yau5Z11slIJzxqXQWaTpmHOkOt4TioK5IiwabCP3L5tAjZDPRaquJ8ZH 9Wtx7kes49GgdlL6lmB714erbnOy8b974TXLVylqSRYxpgAnpaxtybqwO7gLfejzNs 8mWqYdPpW/ymoCUaQsea8GT2xub5jNL8bDPgqLmjXGp8cEkM+nt2t/YljSPRdIUqG+ UcAhLzbR04e/hmmqXpaVU4vRvzaPhaquSTKaUKqwsGWgcNo3e+JSI1hHjNP5uD7k7S iFjDy3zLsAi7oawy5b6MqkM0b7thXhWBn3ixpuIx9Q0tzhYhNTho0HeVTT/HcFGVId Z8JCEaaqYn36g== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Tue, 21 Mar 2023 22:30:26 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v11 2/5] clk: meson: introduce new pll power-on sequence for A1 SoC family Date: Tue, 21 Mar 2023 22:30:11 +0300 Message-ID: <20230321193014.26349-3-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230321193014.26349-1-ddrokosov@sberdevices.ru> References: <20230321193014.26349-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/21 14:08:00 #20985970 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230321_123036_395857_6C5F8385 X-CRM114-Status: GOOD ( 14.63 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org Modern meson PLL IPs are a little bit different from early known PLLs. The main difference is located in the init/enable/disable sequences; the rate logic is the same. In A1 PLL, the PLL enable sequence is different, so add new optional pll reg bits and use the new power-on sequence to enable the PLL: 1. enable the pll, delay for 10us 2. enable the pll self-adaption current module, delay for 40us 3. enable the lock detect module Signed-off-by: Jian Hu Acked-by: Martin Blumenstingl Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/clk-pll.c | 23 +++++++++++++++++++++++ drivers/clk/meson/clk-pll.h | 2 ++ 2 files changed, 25 insertions(+) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index 314ca945a4d0..56ec2210f1ad 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -358,6 +358,25 @@ static int meson_clk_pll_enable(struct clk_hw *hw) if (MESON_PARM_APPLICABLE(&pll->rst)) meson_parm_write(clk->map, &pll->rst, 0); + /* + * Compared with the previous SoCs, self-adaption current module + * is newly added for A1, keep the new power-on sequence to enable the + * PLL. The sequence is: + * 1. enable the pll, delay for 10us + * 2. enable the pll self-adaption current module, delay for 40us + * 3. enable the lock detect module + */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) { + usleep_range(10, 20); + meson_parm_write(clk->map, &pll->current_en, 1); + usleep_range(40, 50); + }; + + if (MESON_PARM_APPLICABLE(&pll->l_detect)) { + meson_parm_write(clk->map, &pll->l_detect, 1); + meson_parm_write(clk->map, &pll->l_detect, 0); + } + if (meson_clk_pll_wait_lock(hw)) return -EIO; @@ -375,6 +394,10 @@ static void meson_clk_pll_disable(struct clk_hw *hw) /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); + + /* Disable PLL internal self-adaption current module */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) + meson_parm_write(clk->map, &pll->current_en, 0); } static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h index 367efd0f6410..a2228c0fdce5 100644 --- a/drivers/clk/meson/clk-pll.h +++ b/drivers/clk/meson/clk-pll.h @@ -36,6 +36,8 @@ struct meson_clk_pll_data { struct parm frac; struct parm l; struct parm rst; + struct parm current_en; + struct parm l_detect; const struct reg_sequence *init_regs; unsigned int init_count; const struct pll_params_table *table; From patchwork Tue Mar 21 19:30:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13183120 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E804CC6FD20 for ; Tue, 21 Mar 2023 19:31:01 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=BFceYjWmzaci1hEFhRKW3qn7s2TN9OjmM/rRIPn1G50=; b=sHTHhufbG8YPTP A7twBiY+8yAPKZYDiaRPHGMhWiPo0qPN2GGT0UElDSbcn6PO7CdANTro9I8/fR+byydkkTMZGOLts gZ8p185WJfHnJGzz4fz/BN0mSEasWxWmUi0I+DIFKvnUg9FvoJpYr2ib0R6fTrW38Z7QM9g9TMrER vel9WC25I08MHVDrDnBO1IqP4IQ5XHUBdlz7OQ4Uznj8bmNbdGYE63I+Ft6GzLDUom6/PWmfCckc9 5f8jWEg+7e1QcukQYA0TZCgcEo9dIkD5rCYdKiMwWBV7LS1FkBnilFKH3MS2YRUEoVMnl2/Yp2pLs fZMXsDUFQWl9jW0LPKUA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pehh6-00DTwj-1O; Tue, 21 Mar 2023 19:30:52 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pehgp-00DTnd-29; Tue, 21 Mar 2023 19:30:41 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 01BC55FD40; Tue, 21 Mar 2023 22:30:29 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1679427029; bh=8WhvsT+VA2KELOW9YjGZbNBYfWlCOu3+OAuCFUpl7hg=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=kBZ82uoAijWHk4jOwalEfwyRLzk2Obu9J/vvSgikC2jT9UUsQzrFPWo5ttVQ2vQzq kX7wH85dzR3pEXIh3lX5iRv/F4Lu/DrYSRoeYnv68eunrB60hZe227ShL3VZotuKMP IeDQoEdbn9fBVznGSOO2jNYpu/lPbHkV4bVSJCahOWNMuyErWPByms7klB9BPQwqBP F7QTT3UzQBqbktQjRprob9bwdBaGr9uvellM/USanAbZSKzpFyP8tQ5QyrLV+wZqUA STyK/JYvJYR0KV3+BOKWvl4Wn7cd9eQDWXJP0gdiOsIOB85jAFAvXva9SZA/Z9VvTN xmho0a1cZdcYQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Tue, 21 Mar 2023 22:30:28 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v11 3/5] dt-bindings: clock: meson: add A1 PLL and Peripherals clkcs bindings Date: Tue, 21 Mar 2023 22:30:12 +0300 Message-ID: <20230321193014.26349-4-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230321193014.26349-1-ddrokosov@sberdevices.ru> References: <20230321193014.26349-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/21 14:08:00 #20985970 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230321_123036_393654_2FE35349 X-CRM114-Status: GOOD ( 15.47 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org Add the documentation for Amlogic A1 PLL and Amlogic A1 Peripherals clock drivers. Introduce Amlogic A1 PLL and Amlogic A1 Peripherals device tree bindings and include them to MAINTAINERS. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov Reviewed-by: Rob Herring --- .../bindings/clock/amlogic,a1-clkc.yaml | 73 +++++++++++ .../bindings/clock/amlogic,a1-pll-clkc.yaml | 59 +++++++++ MAINTAINERS | 1 + include/dt-bindings/clock/amlogic,a1-clkc.h | 113 ++++++++++++++++++ .../dt-bindings/clock/amlogic,a1-pll-clkc.h | 21 ++++ 5 files changed, 267 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml create mode 100644 include/dt-bindings/clock/amlogic,a1-clkc.h create mode 100644 include/dt-bindings/clock/amlogic,a1-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml new file mode 100644 index 000000000000..cb6d8f4eb959 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson A/C serials Peripheral Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div3 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input oscillator (usually at 24MHz) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@800 { + compatible = "amlogic,a1-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..77a13b1f9d5a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson A/C serials PLL Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-pll-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixpll_in + - description: input hifipll_in + + clock-names: + items: + - const: fixpll_in + - const: hifipll_in + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 39ff1a717625..8438bc9bd636 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1895,6 +1895,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/a1* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/include/dt-bindings/clock/amlogic,a1-clkc.h b/include/dt-bindings/clock/amlogic,a1-clkc.h new file mode 100644 index 000000000000..95131779982c --- /dev/null +++ b/include/dt-bindings/clock/amlogic,a1-clkc.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_CLKC_H +#define __A1_CLKC_H + +#define CLKID_FIXPLL_IN 0 +#define CLKID_USB_PHY_IN 1 +#define CLKID_USB_CTRL_IN 2 +#define CLKID_HIFIPLL_IN 3 +#define CLKID_SYSPLL_IN 4 +#define CLKID_DDS_IN 5 +#define CLKID_SYS 6 +#define CLKID_CLKTREE 7 +#define CLKID_RESET_CTRL 8 +#define CLKID_ANALOG_CTRL 9 +#define CLKID_PWR_CTRL 10 +#define CLKID_PAD_CTRL 11 +#define CLKID_SYS_CTRL 12 +#define CLKID_TEMP_SENSOR 13 +#define CLKID_AM2AXI_DIV 14 +#define CLKID_SPICC_B 15 +#define CLKID_SPICC_A 16 +#define CLKID_MSR 17 +#define CLKID_AUDIO 18 +#define CLKID_JTAG_CTRL 19 +#define CLKID_SARADC_EN 20 +#define CLKID_PWM_EF 21 +#define CLKID_PWM_CD 22 +#define CLKID_PWM_AB 23 +#define CLKID_CEC 24 +#define CLKID_I2C_S 25 +#define CLKID_IR_CTRL 26 +#define CLKID_I2C_M_D 27 +#define CLKID_I2C_M_C 28 +#define CLKID_I2C_M_B 29 +#define CLKID_I2C_M_A 30 +#define CLKID_ACODEC 31 +#define CLKID_OTP 32 +#define CLKID_SD_EMMC_A 33 +#define CLKID_USB_PHY 34 +#define CLKID_USB_CTRL 35 +#define CLKID_SYS_DSPB 36 +#define CLKID_SYS_DSPA 37 +#define CLKID_DMA 38 +#define CLKID_IRQ_CTRL 39 +#define CLKID_NIC 40 +#define CLKID_GIC 41 +#define CLKID_UART_C 42 +#define CLKID_UART_B 43 +#define CLKID_UART_A 44 +#define CLKID_SYS_PSRAM 45 +#define CLKID_RSA 46 +#define CLKID_CORESIGHT 47 +#define CLKID_AM2AXI_VAD 48 +#define CLKID_AUDIO_VAD 49 +#define CLKID_AXI_DMC 50 +#define CLKID_AXI_PSRAM 51 +#define CLKID_RAMB 52 +#define CLKID_RAMA 53 +#define CLKID_AXI_SPIFC 54 +#define CLKID_AXI_NIC 55 +#define CLKID_AXI_DMA 56 +#define CLKID_CPU_CTRL 57 +#define CLKID_ROM 58 +#define CLKID_PROC_I2C 59 +#define CLKID_DSPA_EN 60 +#define CLKID_DSPA_EN_NIC 61 +#define CLKID_DSPB_EN 62 +#define CLKID_DSPB_EN_NIC 63 +#define CLKID_RTC 64 +#define CLKID_CECA_32K 65 +#define CLKID_CECB_32K 66 +#define CLKID_24M 67 +#define CLKID_12M 68 +#define CLKID_FCLK_DIV2_DIVN 69 +#define CLKID_GEN 70 +#define CLKID_SARADC 71 +#define CLKID_PWM_A 72 +#define CLKID_PWM_B 73 +#define CLKID_PWM_C 74 +#define CLKID_PWM_D 75 +#define CLKID_PWM_E 76 +#define CLKID_PWM_F 77 +#define CLKID_SPICC 78 +#define CLKID_TS 79 +#define CLKID_SPIFC 80 +#define CLKID_USB_BUS 81 +#define CLKID_SD_EMMC 82 +#define CLKID_PSRAM 83 +#define CLKID_DMC 84 +#define CLKID_GEN_SEL 85 +#define CLKID_PWM_A_SEL 86 +#define CLKID_PWM_B_SEL 87 +#define CLKID_PWM_C_SEL 88 +#define CLKID_PWM_D_SEL 89 +#define CLKID_PWM_E_SEL 90 +#define CLKID_PWM_F_SEL 91 +#define CLKID_DSPA_A_SEL 92 +#define CLKID_DSPA_B_SEL 93 +#define CLKID_DSPB_A_SEL 94 +#define CLKID_DSPB_B_SEL 95 +#define CLKID_CECA_32K_SEL 96 +#define CLKID_CECB_32K_SEL 97 +#define NR_CLKS 98 + +#endif /* __A1_CLKC_H */ diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h new file mode 100644 index 000000000000..740fe8c4db5d --- /dev/null +++ b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_CLKC_H +#define __A1_PLL_CLKC_H + +#define CLKID_FIXED_PLL 0 +#define CLKID_FCLK_DIV2 1 +#define CLKID_FCLK_DIV3 2 +#define CLKID_FCLK_DIV5 3 +#define CLKID_FCLK_DIV7 4 +#define CLKID_HIFI_PLL 5 +#define NR_PLL_CLKS 6 + +#endif /* __A1_PLL_CLKC_H */ From patchwork Tue Mar 21 19:30:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13183121 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id A8F4CC6FD1D for ; Tue, 21 Mar 2023 19:31:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=H/6QVu/Wq75u+9SZj+MDgJt9nm3YvIFpPfM667YH4Ns=; b=b6RCEJC1cJAj63 Et0rcK1xZnYJhfIjFwmxswUt9+B7nzN7WNDqcQr1QRTbwsmj7ZanfJtVgsQX2v89yzgOnrA5TM1TS EZpHu4kbpB4SLjw+UyHbx5XETwWfu2KpiWB5j+KntBuG4hmugljgwVv3hUpZ+I63yKh0mOQBtVYl2 Tp6uo1rIFE2LEiQ1HZUHi6Jfv73EwXiVMc+GBaBkcScBtqOrPpBljEXkTxanAMtrTkKrJaJMC5N+8 WpGuV8MO57WdW6N6zjHUApFlVpTQwPp/MtfR4QC5/1MbIzFHQkaZHXq+6/xXfEgauDMbYxqzrJrLK HYsCv0gbdXHD7rP8v/2w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pehh8-00DTy1-1q; Tue, 21 Mar 2023 19:30:54 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pehgq-00DToQ-29; Tue, 21 Mar 2023 19:30:41 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 3C6C65FD41; Tue, 21 Mar 2023 22:30:30 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1679427030; bh=d3/Xjefyilbmom7A7PoXqlLAz31lbqcRJaTAgkTo0VM=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=PbVVf7eMYlbOQgtJbKWzL8pV5L2HPgRutuQncLKO1Y76hoH/tLcmkG62V8pbH1z0Z pITllcLyKnwYLoWPEZdyuGGhkM7XyMsgayOE9wtVhYioE1d/DzntHt0+YOD5CC0XGy JlLXI2LarSqPDTkl17ZurNcfSqfrATYpljNql7dG6xFu2c/qB/BWEO3JaqfcZ8y+4d gZQbSgxB1Nb6DvWb7Zxgz8RFkgxKFf0PkS0QodVwE9HqxR3QqABa3VipPKl1UIdnYs aZv5wY0kSGV1ysdzgAL6k3k3iOiIYecd67IDmThiCslM1QpgsZMDITSXSs30L2/A4v tFPuFaVQv1sHQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Tue, 21 Mar 2023 22:30:30 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v11 4/5] clk: meson: a1: add Amlogic A1 PLL clock controller driver Date: Tue, 21 Mar 2023 22:30:13 +0300 Message-ID: <20230321193014.26349-5-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230321193014.26349-1-ddrokosov@sberdevices.ru> References: <20230321193014.26349-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/21 14:08:00 #20985970 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230321_123037_085945_59B8EE4F X-CRM114-Status: GOOD ( 30.06 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org Introduce PLL clock controller for Amlogic A1 SoC family. The clock unit is an APB slave module that is designed for generating all of the internal and system clocks. The SoC uses an external 24MHz crystal; there are 4 internal PLLs: SYS_PLL/HIFI_PLL/USB_PLL/(FIXPLL), these PLLs generate 27 clock sources. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-pll.c | 385 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1-pll.h | 31 +++ 4 files changed, 427 insertions(+) create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..f56da2a4b000 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -99,6 +99,16 @@ config COMMON_CLK_AXG_AUDIO Support for the audio clock controller on AmLogic A113D devices, aka axg, Say Y if you want audio subsystem to work. +config COMMON_CLK_A1_PLL + tristate "Meson A1 SoC PLL controller support" + depends on ARM64 + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + help + Support for the PLL clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 PLL clock controller + to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..2f17f475a48f 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c new file mode 100644 index 000000000000..3420fecb8fc3 --- /dev/null +++ b/drivers/clk/meson/a1-pll.c @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1-pll.h" +#include "clk-regmap.h" + +static struct clk_regmap fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_STS, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fixpll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixed_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixed_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range hifi_pll_mult_range = { + .min = 32, + .max = 64, +}; + +static const struct reg_sequence hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 }, +}; + +static struct clk_regmap hifi_pll = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_STS, + .shift = 31, + .width = 1, + }, + .current_en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 26, + .width = 1, + }, + .l_detect = { + .reg_off = ANACTRL_HIFIPLL_CTRL2, + .shift = 6, + .width = 1, + }, + .range = &hifi_pll_mult_range, + .init_regs = hifi_init_regs, + .init_count = ARRAY_SIZE(hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &meson_clk_pll_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "hifipll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_div.hw + }, + .num_parents = 1, + /* + * This clock is used by DDR clock in BL2 firmware + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div3_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div5_div.hw + }, + .num_parents = 1, + /* + * This clock is used by AXI bus which setted in Romcode + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_pll_public_clks = { + .hws = { + [CLKID_FIXED_PLL] = &fixed_pll.hw, + [CLKID_FCLK_DIV2] = &fclk_div2.hw, + [CLKID_FCLK_DIV3] = &fclk_div3.hw, + [CLKID_FCLK_DIV5] = &fclk_div5.hw, + [CLKID_FCLK_DIV7] = &fclk_div7.hw, + [CLKID_HIFI_PLL] = &hifi_pll.hw, + [NR_PLL_CLKS] = NULL, + }, + .num = NR_PLL_CLKS, +}; + +/* + * These clocks are entirely contrived and do not map onto the hardware. + * It has now been decided to expose public clocks in the DT bindings. + * Only below clocks we don't want to expose, such as the internal muxes + * and dividers of composite clocks, will remain defined here. + */ +static struct clk_hw_onecell_data a1_pll_private_clks = { + .hws = { + &fixed_pll_dco.hw, + &fclk_div2_div.hw, + &fclk_div3_div.hw, + &fclk_div5_div.hw, + &fclk_div7_div.hw, + }, + .num = 5, +}; + +static struct clk_regmap *const a1_pll_regmaps[] = { + &fixed_pll_dco, + &fixed_pll, + &fclk_div2, + &fclk_div3, + &fclk_div5, + &fclk_div7, + &hifi_pll, +}; + +static struct regmap_config a1_pll_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_pll_clks_register(struct device *dev, + struct clk_hw_onecell_data *clks) +{ + int i, err = 0; + + for (i = 0; i < clks->num; i++) { + err = devm_clk_hw_register(dev, clks->hws[i]); + if (err) + return err; + } + + return err; +} + +static int meson_a1_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++) + a1_pll_regmaps[i]->map = map; + + /* DT clocks registration */ + err = meson_a1_pll_clks_register(dev, &a1_pll_public_clks); + if (err) + return dev_err_probe(dev, err, + "public clks registration failed\n"); + + /* Internal clocks registration */ + err = meson_a1_pll_clks_register(dev, &a1_pll_private_clks); + if (err) + return dev_err_probe(dev, err, + "private clks registration failed\n"); + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_pll_public_clks); +} + +static const struct of_device_id a1_pll_clkc_match_table[] = { + { .compatible = "amlogic,a1-pll-clkc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table); + +static struct platform_driver a1_pll_clkc_driver = { + .probe = meson_a1_pll_probe, + .driver = { + .name = "a1-pll-clkc", + .of_match_table = of_match_ptr(a1_pll_clkc_match_table), + }, +}; + +module_platform_driver(a1_pll_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h new file mode 100644 index 000000000000..97d0cc2c1f7c --- /dev/null +++ b/drivers/clk/meson/a1-pll.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic Meson-A1 PLL Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_H +#define __A1_PLL_H + +#include "clk-pll.h" + +/* PLL register offset */ +#define ANACTRL_FIXPLL_CTRL0 0x0 +#define ANACTRL_FIXPLL_CTRL1 0x4 +#define ANACTRL_FIXPLL_STS 0x14 +#define ANACTRL_HIFIPLL_CTRL0 0xc0 +#define ANACTRL_HIFIPLL_CTRL1 0xc4 +#define ANACTRL_HIFIPLL_CTRL2 0xc8 +#define ANACTRL_HIFIPLL_CTRL3 0xcc +#define ANACTRL_HIFIPLL_CTRL4 0xd0 +#define ANACTRL_HIFIPLL_STS 0xd4 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +#endif /* __A1_PLL_H */ From patchwork Tue Mar 21 19:30:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13183122 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 428C0C6FD1D for ; Tue, 21 Mar 2023 19:31:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=qnq+OwjUglskXbFjtw7h6lujiIAbo3IiTRR4HGzHGq4=; b=48SRQ3fZKD0Bwg uqBTEZWlnHZGoA4iDMt3lSXv7tsIZhhuOpwJ+7G2OJCkDlFtqeeBA6ysgGCcwqsP3xmxullim6quW qMX9KtNB2bKb5ARkJL41TlkRS7sZuIJucKm9LQRJ8vVc5i7UOVAy2HbPpOs/pTgUuny515MUDV1pG 6K0TO7Ckks/l4RAr5Vf6UmgVxE7PDcvxSRExrpfNLMsfXrS3+xEyImHN1h538RhvioLnIpYh0S1CY EtfpflEIcl0Inxg5H6ltQj/zPr3dGgL5tS8zfYtkMAuEQQK1ofny81EJ3QbFfizKnmcm6Ul3jWxz3 AoAohRbrH0aQ2kyso8lQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pehhE-00DU1E-00; Tue, 21 Mar 2023 19:31:00 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pehgv-00DTry-1N; Tue, 21 Mar 2023 19:30:47 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 382DC5FD42; Tue, 21 Mar 2023 22:30:32 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1679427032; bh=RDdntv6K/Cc6mJQ5f8OsQtLdoweCbP81E40bgG0Fqk8=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=hM78/Mc+zsymr5wtUzybeUB80giQqT01/Nzak0KfbrszDBogE2EagnjG425r2KXJY 4IVVTplNKMy7homp3ZlMoF8Hc4XCZ7mwRTq7Hx1t/CX2rD1/TWSb2GB9Mr2PtbWPg2 jN1WwttHKgVZiNAjFrGxWxcRa2ux4DJcTtc5Kzja5EvnYYadgjgmSxw00MEzRl6MlF +6gNHjwhw4CW7UNlseCMY8v4e60ItNx9Q09qncdbBzfkzY2nnHBHnfMmayGs2Jw5ea DZ6r2g3ja6eBTM0xrV9KV8F5qfoWKHI+buNaKYfOaEJRarRbcQoYDDHwXm0iBkZnyg E+aj1emCzYIuQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Tue, 21 Mar 2023 22:30:32 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v11 5/5] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver Date: Tue, 21 Mar 2023 22:30:14 +0300 Message-ID: <20230321193014.26349-6-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230321193014.26349-1-ddrokosov@sberdevices.ru> References: <20230321193014.26349-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/21 14:08:00 #20985970 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230321_123042_019362_B9F75980 X-CRM114-Status: GOOD ( 22.30 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org Introduce Peripherals clock controller for Amlogic A1 SoC family. A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU, and Audio. This patchset adds support for Amlogic A1 Peripherals clock driver and allows to generate clocks for all A1 SoC peripheral IPs. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1.c | 2344 ++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1.h | 49 + 4 files changed, 2404 insertions(+) create mode 100644 drivers/clk/meson/a1.c create mode 100644 drivers/clk/meson/a1.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index f56da2a4b000..970892b07043 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL device, A1 SoC Family. Say Y if you want A1 PLL clock controller to work. +config COMMON_CLK_A1 + tristate "Meson A1 SoC clock controller support" + depends on ARM64 + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_REGMAP + help + Support for the Peripherals clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 Peripherals clock + controller to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 2f17f475a48f..0e6f293c05d4 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o +obj-$(CONFIG_COMMON_CLK_A1) += a1.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c new file mode 100644 index 000000000000..3f4263ac404c --- /dev/null +++ b/drivers/clk/meson/a1.c @@ -0,0 +1,2344 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1.h" +#include "clk-dualdiv.h" +#include "clk-regmap.h" + +static struct clk_regmap xtal_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixpll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixpll_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_phy_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_phy_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_ctrl_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_ctrl_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap hifipll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "hifipll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap syspll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "syspll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap dds_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "dds_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param clk_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap rtc_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_xtal = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_xtal", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = RTC_CTRL, + .mask = 0x3, + .shift = 0, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_xtal.hw, + &rtc_32k_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +struct clk_regmap rtc = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 }; +static const struct clk_parent_data sys_parents[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap sys_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys", + .ops = &clk_regmap_mux_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a.hw, + &sys_b.hw, + }, + .num_parents = 2, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 }; +static const struct clk_parent_data dsp_ab_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap dspa_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* + * DSPA_A clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force dsp parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* + * DSPA_B clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force dsp parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a.hw, + &dspa_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* + * DSPB_A clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force dsp parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* + * DSPB_B clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force dsp parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a.hw, + &dspb_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap clk_24m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "24m", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor clk_24m_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "24m_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap clk_12m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12m", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m_div2.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn_pre = { + .data = &(struct clk_regmap_div_data){ + .offset = CLK12_24_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn_pre", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fclk_div2", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_divn_pre.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver, + * the index 4 is the clock measurement source, it's not supported yet + */ +static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 }; +static const struct clk_parent_data gen_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &rtc.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap gen_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = GEN_CLK_CTRL, + .mask = 0xf, + .shift = 12, + .table = gen_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = gen_parent_data, + .num_parents = ARRAY_SIZE(gen_parent_data), + /* + * GEN clk can be connected to external PAD, so we may want to + * setup it from device tree directly. + * Also GEN clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap gen_div = { + .data = &(struct clk_regmap_div_data){ + .offset = GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap gen = { + .data = &(struct clk_regmap_gate_data){ + .offset = GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SAR_ADC_CLK_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &sys.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap saradc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SAR_ADC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SAR_ADC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "saradc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_abcd_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* + * PWM_A clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* + * PWM_B clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* + * PWM_C clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_c_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_c", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* + * PWM_D clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_d_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_d", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_ef_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div5", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_e_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* + * PWM_E clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_e_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_e = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_e", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* + * PWM_F clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force pwm parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_f_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_f", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * spicc clk + * fdiv2 |\ |\ _____ + * ---------| |---DIV--| | | | spicc out + * ---------| | | |-----|GATE |--------- + * ..... |/ | / |_____| + * --------------------|/ + * 24M + */ +static const struct clk_parent_data spicc_spifc_parents[] = { + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, + { .fw_name = "hifi_pll" }, +}; + +static struct clk_regmap spicc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spicc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPICC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spicc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPICC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ts_div = { + .data = &(struct clk_regmap_div_data){ + .offset = TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ts = { + .data = &(struct clk_regmap_gate_data){ + .offset = TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "ts", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ts_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spifc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPIFC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spifc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPIFC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spifc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data usb_bus_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap usb_bus_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = USB_BUSCLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = usb_bus_parents, + .num_parents = ARRAY_SIZE(usb_bus_parents), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus_div = { + .data = &(struct clk_regmap_div_data){ + .offset = USB_BUSCLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus = { + .data = &(struct clk_regmap_gate_data){ + .offset = USB_BUSCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_bus", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = { + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap sd_emmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap sd_emmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &sd_emmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SD_EMMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap psram_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PSRAM_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &psram_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram = { + .data = &(struct clk_regmap_gate_data){ + .offset = PSRAM_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "psram", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap dmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &dmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = DMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "dmc", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECA_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_div.hw, + &ceca_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* + * CECA_32K clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force ceca_32k parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap ceca_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECB_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_div.hw, + &cecb_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* + * CECB_32K clk can be inherited from more accurate RTC clock, + * so in some situations we may want to freeze its parent. + * Therefore force cecb_32k parent setup on device tree side + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap cecb_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &sys.hw) + +static MESON_GATE(clktree, SYS_CLK_EN0, 0); +static MESON_GATE(reset_ctrl, SYS_CLK_EN0, 1); +static MESON_GATE(analog_ctrl, SYS_CLK_EN0, 2); +static MESON_GATE(pwr_ctrl, SYS_CLK_EN0, 3); +static MESON_GATE(pad_ctrl, SYS_CLK_EN0, 4); +static MESON_GATE(sys_ctrl, SYS_CLK_EN0, 5); +static MESON_GATE(temp_sensor, SYS_CLK_EN0, 6); +static MESON_GATE(am2axi_dev, SYS_CLK_EN0, 7); +static MESON_GATE(spicc_b, SYS_CLK_EN0, 8); +static MESON_GATE(spicc_a, SYS_CLK_EN0, 9); +static MESON_GATE(msr, SYS_CLK_EN0, 10); +static MESON_GATE(audio, SYS_CLK_EN0, 11); +static MESON_GATE(jtag_ctrl, SYS_CLK_EN0, 12); +static MESON_GATE(saradc_en, SYS_CLK_EN0, 13); +static MESON_GATE(pwm_ef, SYS_CLK_EN0, 14); +static MESON_GATE(pwm_cd, SYS_CLK_EN0, 15); +static MESON_GATE(pwm_ab, SYS_CLK_EN0, 16); +static MESON_GATE(cec, SYS_CLK_EN0, 17); +static MESON_GATE(i2c_s, SYS_CLK_EN0, 18); +static MESON_GATE(ir_ctrl, SYS_CLK_EN0, 19); +static MESON_GATE(i2c_m_d, SYS_CLK_EN0, 20); +static MESON_GATE(i2c_m_c, SYS_CLK_EN0, 21); +static MESON_GATE(i2c_m_b, SYS_CLK_EN0, 22); +static MESON_GATE(i2c_m_a, SYS_CLK_EN0, 23); +static MESON_GATE(acodec, SYS_CLK_EN0, 24); +static MESON_GATE(otp, SYS_CLK_EN0, 25); +static MESON_GATE(sd_emmc_a, SYS_CLK_EN0, 26); +static MESON_GATE(usb_phy, SYS_CLK_EN0, 27); +static MESON_GATE(usb_ctrl, SYS_CLK_EN0, 28); +static MESON_GATE(sys_dspb, SYS_CLK_EN0, 29); +static MESON_GATE(sys_dspa, SYS_CLK_EN0, 30); +static MESON_GATE(dma, SYS_CLK_EN0, 31); +static MESON_GATE(irq_ctrl, SYS_CLK_EN1, 0); +static MESON_GATE(nic, SYS_CLK_EN1, 1); +static MESON_GATE(gic, SYS_CLK_EN1, 2); +static MESON_GATE(uart_c, SYS_CLK_EN1, 3); +static MESON_GATE(uart_b, SYS_CLK_EN1, 4); +static MESON_GATE(uart_a, SYS_CLK_EN1, 5); +static MESON_GATE(sys_psram, SYS_CLK_EN1, 6); +static MESON_GATE(rsa, SYS_CLK_EN1, 8); +static MESON_GATE(coresight, SYS_CLK_EN1, 9); +static MESON_GATE(am2axi_vad, AXI_CLK_EN, 0); +static MESON_GATE(audio_vad, AXI_CLK_EN, 1); +static MESON_GATE(axi_dmc, AXI_CLK_EN, 3); +static MESON_GATE(axi_psram, AXI_CLK_EN, 4); +static MESON_GATE(ramb, AXI_CLK_EN, 5); +static MESON_GATE(rama, AXI_CLK_EN, 6); +static MESON_GATE(axi_spifc, AXI_CLK_EN, 7); +static MESON_GATE(axi_nic, AXI_CLK_EN, 8); +static MESON_GATE(axi_dma, AXI_CLK_EN, 9); +static MESON_GATE(cpu_ctrl, AXI_CLK_EN, 10); +static MESON_GATE(rom, AXI_CLK_EN, 11); +static MESON_GATE(prod_i2c, AXI_CLK_EN, 12); + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_periphs_public_clks = { + .hws = { + [CLKID_FIXPLL_IN] = &fixpll_in.hw, + [CLKID_USB_PHY_IN] = &usb_phy_in.hw, + [CLKID_USB_CTRL_IN] = &usb_ctrl_in.hw, + [CLKID_HIFIPLL_IN] = &hifipll_in.hw, + [CLKID_SYSPLL_IN] = &syspll_in.hw, + [CLKID_DDS_IN] = &dds_in.hw, + [CLKID_SYS] = &sys.hw, + [CLKID_CLKTREE] = &clktree.hw, + [CLKID_RESET_CTRL] = &reset_ctrl.hw, + [CLKID_ANALOG_CTRL] = &analog_ctrl.hw, + [CLKID_PWR_CTRL] = &pwr_ctrl.hw, + [CLKID_PAD_CTRL] = &pad_ctrl.hw, + [CLKID_SYS_CTRL] = &sys_ctrl.hw, + [CLKID_TEMP_SENSOR] = &temp_sensor.hw, + [CLKID_AM2AXI_DIV] = &am2axi_dev.hw, + [CLKID_SPICC_B] = &spicc_b.hw, + [CLKID_SPICC_A] = &spicc_a.hw, + [CLKID_MSR] = &msr.hw, + [CLKID_AUDIO] = &audio.hw, + [CLKID_JTAG_CTRL] = &jtag_ctrl.hw, + [CLKID_SARADC_EN] = &saradc_en.hw, + [CLKID_PWM_EF] = &pwm_ef.hw, + [CLKID_PWM_CD] = &pwm_cd.hw, + [CLKID_PWM_AB] = &pwm_ab.hw, + [CLKID_CEC] = &cec.hw, + [CLKID_I2C_S] = &i2c_s.hw, + [CLKID_IR_CTRL] = &ir_ctrl.hw, + [CLKID_I2C_M_D] = &i2c_m_d.hw, + [CLKID_I2C_M_C] = &i2c_m_c.hw, + [CLKID_I2C_M_B] = &i2c_m_b.hw, + [CLKID_I2C_M_A] = &i2c_m_a.hw, + [CLKID_ACODEC] = &acodec.hw, + [CLKID_OTP] = &otp.hw, + [CLKID_SD_EMMC_A] = &sd_emmc_a.hw, + [CLKID_USB_PHY] = &usb_phy.hw, + [CLKID_USB_CTRL] = &usb_ctrl.hw, + [CLKID_SYS_DSPB] = &sys_dspb.hw, + [CLKID_SYS_DSPA] = &sys_dspa.hw, + [CLKID_DMA] = &dma.hw, + [CLKID_IRQ_CTRL] = &irq_ctrl.hw, + [CLKID_NIC] = &nic.hw, + [CLKID_GIC] = &gic.hw, + [CLKID_UART_C] = &uart_c.hw, + [CLKID_UART_B] = &uart_b.hw, + [CLKID_UART_A] = &uart_a.hw, + [CLKID_SYS_PSRAM] = &sys_psram.hw, + [CLKID_RSA] = &rsa.hw, + [CLKID_CORESIGHT] = &coresight.hw, + [CLKID_AM2AXI_VAD] = &am2axi_vad.hw, + [CLKID_AUDIO_VAD] = &audio_vad.hw, + [CLKID_AXI_DMC] = &axi_dmc.hw, + [CLKID_AXI_PSRAM] = &axi_psram.hw, + [CLKID_RAMB] = &ramb.hw, + [CLKID_RAMA] = &rama.hw, + [CLKID_AXI_SPIFC] = &axi_spifc.hw, + [CLKID_AXI_NIC] = &axi_nic.hw, + [CLKID_AXI_DMA] = &axi_dma.hw, + [CLKID_CPU_CTRL] = &cpu_ctrl.hw, + [CLKID_ROM] = &rom.hw, + [CLKID_PROC_I2C] = &prod_i2c.hw, + [CLKID_DSPA_EN] = &dspa_en.hw, + [CLKID_DSPA_EN_NIC] = &dspa_en_nic.hw, + [CLKID_DSPB_EN] = &dspb_en.hw, + [CLKID_DSPB_EN_NIC] = &dspb_en_nic.hw, + [CLKID_RTC] = &rtc.hw, + [CLKID_CECA_32K] = &ceca_32k_out.hw, + [CLKID_CECB_32K] = &cecb_32k_out.hw, + [CLKID_24M] = &clk_24m.hw, + [CLKID_12M] = &clk_12m.hw, + [CLKID_FCLK_DIV2_DIVN] = &fclk_div2_divn.hw, + [CLKID_GEN] = &gen.hw, + [CLKID_SARADC] = &saradc.hw, + [CLKID_PWM_A] = &pwm_a.hw, + [CLKID_PWM_B] = &pwm_b.hw, + [CLKID_PWM_C] = &pwm_c.hw, + [CLKID_PWM_D] = &pwm_d.hw, + [CLKID_PWM_E] = &pwm_e.hw, + [CLKID_PWM_F] = &pwm_f.hw, + [CLKID_SPICC] = &spicc.hw, + [CLKID_TS] = &ts.hw, + [CLKID_SPIFC] = &spifc.hw, + [CLKID_USB_BUS] = &usb_bus.hw, + [CLKID_SD_EMMC] = &sd_emmc.hw, + [CLKID_PSRAM] = &psram.hw, + [CLKID_DMC] = &dmc.hw, + [CLKID_GEN_SEL] = &gen_sel.hw, + [CLKID_PWM_A_SEL] = &pwm_a_sel.hw, + [CLKID_PWM_B_SEL] = &pwm_b_sel.hw, + [CLKID_PWM_C_SEL] = &pwm_c_sel.hw, + [CLKID_PWM_D_SEL] = &pwm_d_sel.hw, + [CLKID_PWM_E_SEL] = &pwm_e_sel.hw, + [CLKID_PWM_F_SEL] = &pwm_f_sel.hw, + [CLKID_DSPA_A_SEL] = &dspa_a_sel.hw, + [CLKID_DSPA_B_SEL] = &dspa_b_sel.hw, + [CLKID_DSPB_A_SEL] = &dspb_a_sel.hw, + [CLKID_DSPB_B_SEL] = &dspb_b_sel.hw, + [CLKID_CECA_32K_SEL] = &ceca_32k_sel.hw, + [CLKID_CECB_32K_SEL] = &cecb_32k_sel.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* + * These clocks are entirely contrived and do not map onto the hardware. + * It has now been decided to expose public clocks in the DT bindings. + * Only below clocks we don't want to expose, such as the internal muxes + * and dividers of composite clocks, will remain defined here. + */ +static struct clk_hw_onecell_data a1_periphs_private_clks = { + .hws = { + &xtal_in.hw, + &dspa_sel.hw, + &dspb_sel.hw, + &saradc_sel.hw, + &sys_a_sel.hw, + &sys_a_div.hw, + &sys_a.hw, + &sys_b_sel.hw, + &sys_b_div.hw, + &sys_b.hw, + &dspa_a_div.hw, + &dspa_a.hw, + &dspa_b_div.hw, + &dspa_b.hw, + &dspb_a_div.hw, + &dspb_a.hw, + &dspb_b_div.hw, + &dspb_b.hw, + &rtc_32k_in.hw, + &rtc_32k_div.hw, + &rtc_32k_xtal.hw, + &rtc_32k_sel.hw, + &cecb_32k_in.hw, + &cecb_32k_div.hw, + &cecb_32k_sel_pre.hw, + &ceca_32k_in.hw, + &ceca_32k_div.hw, + &ceca_32k_sel_pre.hw, + &fclk_div2_divn_pre.hw, + &clk_24m_div2.hw, + &gen_div.hw, + &saradc_div.hw, + &pwm_a_div.hw, + &pwm_b_div.hw, + &pwm_c_div.hw, + &pwm_d_div.hw, + &pwm_e_div.hw, + &pwm_f_div.hw, + &spicc_sel.hw, + &spicc_div.hw, + &spicc_sel2.hw, + &ts_div.hw, + &spifc_sel.hw, + &spifc_div.hw, + &spifc_sel2.hw, + &usb_bus_sel.hw, + &usb_bus_div.hw, + &sd_emmc_sel.hw, + &sd_emmc_div.hw, + &sd_emmc_sel2.hw, + &psram_sel.hw, + &psram_div.hw, + &psram_sel2.hw, + &dmc_sel.hw, + &dmc_div.hw, + &dmc_sel2.hw, + }, + .num = 56, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const a1_periphs_regmaps[] = { + &xtal_in, + &fixpll_in, + &usb_phy_in, + &usb_ctrl_in, + &hifipll_in, + &syspll_in, + &dds_in, + &sys, + &clktree, + &reset_ctrl, + &analog_ctrl, + &pwr_ctrl, + &pad_ctrl, + &sys_ctrl, + &temp_sensor, + &am2axi_dev, + &spicc_b, + &spicc_a, + &msr, + &audio, + &jtag_ctrl, + &saradc_en, + &pwm_ef, + &pwm_cd, + &pwm_ab, + &cec, + &i2c_s, + &ir_ctrl, + &i2c_m_d, + &i2c_m_c, + &i2c_m_b, + &i2c_m_a, + &acodec, + &otp, + &sd_emmc_a, + &usb_phy, + &usb_ctrl, + &sys_dspb, + &sys_dspa, + &dma, + &irq_ctrl, + &nic, + &gic, + &uart_c, + &uart_b, + &uart_a, + &sys_psram, + &rsa, + &coresight, + &am2axi_vad, + &audio_vad, + &axi_dmc, + &axi_psram, + &ramb, + &rama, + &axi_spifc, + &axi_nic, + &axi_dma, + &cpu_ctrl, + &rom, + &prod_i2c, + &dspa_sel, + &dspb_sel, + &dspa_en, + &dspa_en_nic, + &dspb_en, + &dspb_en_nic, + &rtc, + &ceca_32k_out, + &cecb_32k_out, + &clk_24m, + &clk_12m, + &fclk_div2_divn, + &gen, + &saradc_sel, + &saradc, + &pwm_a, + &pwm_b, + &pwm_c, + &pwm_d, + &pwm_e, + &pwm_f, + &spicc, + &ts, + &spifc, + &usb_bus, + &sd_emmc, + &psram, + &dmc, + &sys_a_sel, + &sys_a_div, + &sys_a, + &sys_b_sel, + &sys_b_div, + &sys_b, + &dspa_a_sel, + &dspa_a_div, + &dspa_a, + &dspa_b_sel, + &dspa_b_div, + &dspa_b, + &dspb_a_sel, + &dspb_a_div, + &dspb_a, + &dspb_b_sel, + &dspb_b_div, + &dspb_b, + &rtc_32k_in, + &rtc_32k_div, + &rtc_32k_xtal, + &rtc_32k_sel, + &cecb_32k_in, + &cecb_32k_div, + &cecb_32k_sel_pre, + &cecb_32k_sel, + &ceca_32k_in, + &ceca_32k_div, + &ceca_32k_sel_pre, + &ceca_32k_sel, + &fclk_div2_divn_pre, + &gen_sel, + &gen_div, + &saradc_div, + &pwm_a_sel, + &pwm_a_div, + &pwm_b_sel, + &pwm_b_div, + &pwm_c_sel, + &pwm_c_div, + &pwm_d_sel, + &pwm_d_div, + &pwm_e_sel, + &pwm_e_div, + &pwm_f_sel, + &pwm_f_div, + &spicc_sel, + &spicc_div, + &spicc_sel2, + &ts_div, + &spifc_sel, + &spifc_div, + &spifc_sel2, + &usb_bus_sel, + &usb_bus_div, + &sd_emmc_sel, + &sd_emmc_div, + &sd_emmc_sel2, + &psram_sel, + &psram_div, + &psram_sel2, + &dmc_sel, + &dmc_div, + &dmc_sel2, +}; + +static struct regmap_config a1_periphs_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_periphs_clks_register(struct device *dev, + struct clk_hw_onecell_data *clks) +{ + int i, err = 0; + + for (i = 0; i < clks->num; i++) { + err = devm_clk_hw_register(dev, clks->hws[i]); + if (err) + return err; + } + + return err; +} + +static int meson_a1_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++) + a1_periphs_regmaps[i]->map = map; + + /* DT clocks registration */ + err = meson_a1_periphs_clks_register(dev, &a1_periphs_public_clks); + if (err) + return dev_err_probe(dev, err, + "public clks registration failed\n"); + + /* Internal clocks registration */ + err = meson_a1_periphs_clks_register(dev, &a1_periphs_private_clks); + if (err) + return dev_err_probe(dev, err, + "private clks registration failed\n"); + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_periphs_public_clks); +} + +static const struct of_device_id a1_periphs_clkc_match_table[] = { + { .compatible = "amlogic,a1-clkc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table); + +static struct platform_driver a1_periphs_clkc_driver = { + .probe = meson_a1_periphs_probe, + .driver = { + .name = "a1-clkc", + .of_match_table = of_match_ptr(a1_periphs_clkc_match_table), + }, +}; + +module_platform_driver(a1_periphs_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h new file mode 100644 index 000000000000..164d52f5b17b --- /dev/null +++ b/drivers/clk/meson/a1.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic Meson-A1 Peripheral Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_H +#define __A1_H + +/* peripheral clock controller register offset */ +#define SYS_OSCIN_CTRL 0x0 +#define RTC_BY_OSCIN_CTRL0 0x4 +#define RTC_BY_OSCIN_CTRL1 0x8 +#define RTC_CTRL 0xc +#define SYS_CLK_CTRL0 0x10 +#define SYS_CLK_EN0 0x1c +#define SYS_CLK_EN1 0x20 +#define AXI_CLK_EN 0x24 +#define DSPA_CLK_EN 0x28 +#define DSPB_CLK_EN 0x2c +#define DSPA_CLK_CTRL0 0x30 +#define DSPB_CLK_CTRL0 0x34 +#define CLK12_24_CTRL 0x38 +#define GEN_CLK_CTRL 0x3c +#define SAR_ADC_CLK_CTRL 0xc0 +#define PWM_CLK_AB_CTRL 0xc4 +#define PWM_CLK_CD_CTRL 0xc8 +#define PWM_CLK_EF_CTRL 0xcc +#define SPICC_CLK_CTRL 0xd0 +#define TS_CLK_CTRL 0xd4 +#define SPIFC_CLK_CTRL 0xd8 +#define USB_BUSCLK_CTRL 0xdc +#define SD_EMMC_CLK_CTRL 0xe0 +#define CECA_CLK_CTRL0 0xe4 +#define CECA_CLK_CTRL1 0xe8 +#define CECB_CLK_CTRL0 0xec +#define CECB_CLK_CTRL1 0xf0 +#define PSRAM_CLK_CTRL 0xf4 +#define DMC_CLK_CTRL 0xf8 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +#endif /* __A1_H */