From patchwork Fri May 5 06:36:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Souradeep Chowdhury X-Patchwork-Id: 13232180 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 715B3C77B7D for ; Fri, 5 May 2023 06:38:02 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=KeED+zDJ1HbZdhR+z7uQyzv4huIVq+uNAdTYvOEdspQ=; b=nLaxVQP8ri2WQq s1H1yZQsHAwyxsBOVSMWiHrHvAfxyHjwbTItPdZmGC8UIpH4SaYOXCqtbUkpDKby3KgMprY6FOQxq rn4kxm/IPMlW6kO6qFR67JYqqz7kXJdXiBTr6SlRZ7P/Hx3X0xn55/Jfru887GAAWaUoCVnOTk9jX 3FYcIfenqsfuAluc4eo72Dvub/PSY5PLYjQKN2jTmWg1HGve5ik2y0J3OcW4xTHceILysR1wWI7hR PeVWp8jAvhOWx+5KUAUx4h66bxaRfOEvJ+rNcTbMdfIUfTFWncF1vUioOI1sP+WNpRjdqenLQ4c/o WGDCKxHQU2DXqTLRDOWA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pup46-009q98-06; Fri, 05 May 2023 06:37:14 +0000 Received: from mx0a-0031df01.pphosted.com ([205.220.168.131]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pup42-009q7K-0t for linux-arm-kernel@lists.infradead.org; Fri, 05 May 2023 06:37:11 +0000 Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3453pxa2028286; Fri, 5 May 2023 06:36:57 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=9L+iB+ub3r6TEbQMkcIk5JjrUEajBbROhVfVmyFK9uc=; b=hD0pjDoqXr7WNo2lSur9dWV1UVgHzi9J1MvMOPOIZYR6mAvMIsvHILQCSuJ8j2biguW2 JCqa2ct7lznPGYvSMs0Tr9KZ2TnwZJaIl1LnmgpZxHNRPvZR84EiblpqhbarSnv7+zkb o90qmR3gVkoTpPtAIGGKLeXM5MZtJ6n4hGvKElnqphYuvqJC/tBf8VgcTUIS67iNN57R e6IXhs5b4yeRqsz1FMsI4R3rC03jkvkSsW3XoQqGjApojknwyIbwq+In9xnmfaVe/qlq zD2+geeu8LwTgyfh7nlMrICCvW3cEut7ic/x1fRDF9m80looKxuIG5VPEKm+zb+LmyTR dQ== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qckf70y5b-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 05 May 2023 06:36:57 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3456aufl004091 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 5 May 2023 06:36:56 GMT Received: from hu-schowdhu-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Thu, 4 May 2023 23:36:56 -0700 From: Souradeep Chowdhury To: Andy Gross , Konrad Dybcio , Krzysztof Kozlowski , Bjorn Andersson , Rob Herring , Alex Elder , Arnd Bergmann , Greg Kroah-Hartman CC: , , , , Sibi Sankar , Rajendra Nayak , Souradeep Chowdhury Subject: [PATCH V23 1/3] dt-bindings: misc: qcom,dcc: Add the dtschema Date: Thu, 4 May 2023 23:36:21 -0700 Message-ID: X-Mailer: git-send-email 2.17.1 In-Reply-To: References: MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01c.na.qualcomm.com (10.47.97.35) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: x23Dq8O44zbUjts3S2hAnsN6iiu9tcOg X-Proofpoint-ORIG-GUID: x23Dq8O44zbUjts3S2hAnsN6iiu9tcOg X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-04_15,2023-05-04_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 spamscore=0 bulkscore=0 phishscore=0 adultscore=0 malwarescore=0 mlxlogscore=999 suspectscore=0 priorityscore=1501 lowpriorityscore=0 impostorscore=0 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305050056 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230504_233710_335318_9E9743B3 X-CRM114-Status: GOOD ( 19.61 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add the device tree bindings for Data Capture and Compare(DCC). Signed-off-by: Souradeep Chowdhury Reviewed-by: Rob Herring Reviewed-by: Bjorn Andersson Reviewed-by: Krzysztof Kozlowski --- .../devicetree/bindings/misc/qcom,dcc.yaml | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/qcom,dcc.yaml diff --git a/Documentation/devicetree/bindings/misc/qcom,dcc.yaml b/Documentation/devicetree/bindings/misc/qcom,dcc.yaml new file mode 100644 index 000000000000..572c10e7c2c8 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/qcom,dcc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/qcom,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Data Capture and Compare + +maintainers: + - Souradeep Chowdhury + +description: | + DCC (Data Capture and Compare) is a DMA engine which is used to save + configuration data or system memory contents during catastrophic failure + or SW trigger. DCC is used to capture and store data for debugging purpose + +properties: + compatible: + items: + - enum: + - qcom,sm8150-dcc + - qcom,sc7280-dcc + - qcom,sc7180-dcc + - qcom,sdm845-dcc + - const: qcom,dcc + + reg: + items: + - description: DCC base + - description: DCC RAM base + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma@10a2000{ + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x010a2000 0x1000>, + <0x010ad000 0x2000>; + }; From patchwork Fri May 5 06:36:22 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Souradeep Chowdhury X-Patchwork-Id: 13232182 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 0FDD6C77B75 for ; Fri, 5 May 2023 06:38:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=OSEmOvswIiGyStIwEIKZLTNLs7b+2vwau+8XZYHm0+M=; b=DpeqWXGwiqtq7C 5gLpGtyJ6OeWfT4YDXD/BdqKdoCELcFQFhpCd6xwIXOGn+tUx7FV7qSBhH/9V4zxFcxxp2T/7v9nb HgSpW7iUqlyf/3CohqXZQ++OdCJxI8SiMgODtVoTAYjQp85bIlnRCBAVFhXmJSKVqB5S/K10thMfn 5HLvz8Z2IoXBlJLqm2YSUbDUHpFrGUpKP09RGNV6ZFAYkESy3GC3kKhNmJtHsEDkpfAO/O7hH36lJ 2f91a8jvzgbFvwnG9OFry/fZLsZwDlXPDaARhWSzunxhmY9zf0J955dMYs3zrOllXvxWLjrqtZ1JX qI43Air6tvd0jJxsFqfA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pup4A-009qAN-0s; Fri, 05 May 2023 06:37:18 +0000 Received: from mx0a-0031df01.pphosted.com ([205.220.168.131]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pup42-009q7X-2r for linux-arm-kernel@lists.infradead.org; Fri, 05 May 2023 06:37:16 +0000 Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 34569EOL001140; Fri, 5 May 2023 06:36:58 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=cJUabBccxfVWylx39CvxGeSarBhavrUVPyNCKAlCoAs=; b=eEBYFGLzXT+O5W4KX5OHSFXl42fViXE8iLqqyTaHtDIm73DMTmINHZtpJk39TdO4ipew vwCIN+fRCfH4/9ROffTn68LVA6MkYb3Qsag8Zx6O5weDMREdTxYbZKQ8DIST2br8zP6L K9J3HOYBufi1yYFyi9tiTy1kjDRoTrQZVvDMQhgHY5miZ0vkc4smNZFgt+KrLFPybOeN S9HBWMi6FKZlx6e7ihUI5kp9Vse4pAHoT7d4RSQRfB5TJpGnnPHdm+HctqMkQJnNtHqa JKSmuP9J7LYyF6NcZuHHsTHTQ8SDjJUG74XB8CqQSjj4Lt+1VpWU1Aysw4Xbre62Eg5a Ew== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qcmm38upd-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 05 May 2023 06:36:58 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3456avxM027915 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 5 May 2023 06:36:57 GMT Received: from hu-schowdhu-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Thu, 4 May 2023 23:36:56 -0700 From: Souradeep Chowdhury To: Andy Gross , Konrad Dybcio , Krzysztof Kozlowski , Bjorn Andersson , Rob Herring , Alex Elder , Arnd Bergmann , Greg Kroah-Hartman CC: , , , , Sibi Sankar , Rajendra Nayak , Souradeep Chowdhury Subject: [PATCH V23 2/3] misc: dcc: Add driver support for Data Capture and Compare unit(DCC) Date: Thu, 4 May 2023 23:36:22 -0700 Message-ID: <2259ab0348282349e88905ea99bcb4aa815d941f.1683265984.git.quic_schowdhu@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: References: MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01c.na.qualcomm.com (10.47.97.35) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: iX54waTX6tU3kCaooZiT5PMlvwkNxkEP X-Proofpoint-GUID: iX54waTX6tU3kCaooZiT5PMlvwkNxkEP X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-04_15,2023-05-04_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=999 mlxscore=0 priorityscore=1501 impostorscore=0 adultscore=0 malwarescore=0 suspectscore=0 phishscore=0 clxscore=1015 bulkscore=0 spamscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305050056 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230504_233710_945010_4E4539E0 X-CRM114-Status: GOOD ( 45.94 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The DCC is a DMA Engine designed to capture and store data during system crash or software triggers. The DCC operates based on user inputs via the debugfs interface. The user gives addresses as inputs and these addresses are stored in the dcc sram. In case of a system crash or a manual software trigger by the user through the debugfs interface, the dcc captures and stores the values at these addresses. This patch contains the driver which has all the methods pertaining to the debugfs interface, auxiliary functions to support all the four fundamental operations of dcc namely read, write, read/modify/write and loop. The probe method here instantiates all the resources necessary for dcc to operate mainly the dedicated dcc sram where it stores the values. The DCC driver can be used for debugging purposes without going for a reboot since it can perform software triggers as well based on user inputs. Also update the documentation for debugfs entries which explains the functionalities of each debugfs file that has been created for dcc. Update the documentation to reflect new module name for dcc. The following is the justification of using debugfs interface over the other alternatives like sysfs/ioctls i) As can be seen from the debugfs attribute descriptions, some of the debugfs attribute files here contains multiple arguments which needs to be accepted from the user. This goes against the design style of sysfs. ii) The user input patterns have been made simple and convenient in this case with the use of debugfs interface as user doesn't need to shuffle between different files to execute one instruction as was the case on using other alternatives. Signed-off-by: Souradeep Chowdhury Reviewed-by: Alex Elder --- Documentation/ABI/testing/debugfs-driver-dcc | 10 +- drivers/misc/Kconfig | 9 + drivers/misc/Makefile | 1 + drivers/misc/qcom-dcc.c | 1325 ++++++++++++++++++ 4 files changed, 1340 insertions(+), 5 deletions(-) create mode 100644 drivers/misc/qcom-dcc.c diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc index 27ed5919d21b..7f588580a906 100644 --- a/Documentation/ABI/testing/debugfs-driver-dcc +++ b/Documentation/ABI/testing/debugfs-driver-dcc @@ -1,4 +1,4 @@ -What: /sys/kernel/debug/dcc/.../ready +What: /sys/kernel/debug/qcom-dcc/.../ready Date: December 2022 Contact: Souradeep Chowdhury Description: @@ -6,7 +6,7 @@ Description: hardware if it's ready to receive user configurations. A 'Y' here indicates dcc is ready. -What: /sys/kernel/debug/dcc/.../trigger +What: /sys/kernel/debug/qcom-dcc/.../trigger Date: December 2022 Contact: Souradeep Chowdhury Description: @@ -14,7 +14,7 @@ Description: triggers. The trigger can be invoked by writing '1' to the file. -What: /sys/kernel/debug/dcc/.../config_reset +What: /sys/kernel/debug/qcom-dcc/.../config_reset Date: December 2022 Contact: Souradeep Chowdhury Description: @@ -24,7 +24,7 @@ Description: stored in the driver gets removed and users need to reconfigure addresses again. -What: /sys/kernel/debug/dcc/.../[list-number]/config +What: /sys/kernel/debug/qcom-dcc/.../[list-number]/config Date: December 2022 Contact: Souradeep Chowdhury Description: @@ -109,7 +109,7 @@ Description:
Space-separated list of addresses. -What: /sys/kernel/debug/dcc/.../[list-number]/enable +What: /sys/kernel/debug/qcom-dcc/.../[list-number]/enable Date: December 2022 Contact: Souradeep Chowdhury Description: diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 433aa4197785..3112dbb15cf4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -276,6 +276,15 @@ config QCOM_COINCELL to maintain PMIC register and RTC state in the absence of external power. +config QCOM_DCC + tristate "Qualcomm Technologies, Inc. Data Capture and Compare(DCC) engine driver" + depends on ARCH_QCOM || COMPILE_TEST + help + This option enables driver for Data Capture and Compare engine. DCC + driver provides interface to configure DCC block and read back + captured data from DCC's internal SRAM. The module name for this + is qcom-dcc.ko + config QCOM_FASTRPC tristate "Qualcomm FastRPC" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 56de43943cd5..dced656e2b37 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o +obj-$(CONFIG_QCOM_DCC) += qcom-dcc.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o diff --git a/drivers/misc/qcom-dcc.c b/drivers/misc/qcom-dcc.c new file mode 100644 index 000000000000..34f0c4d9999d --- /dev/null +++ b/drivers/misc/qcom-dcc.c @@ -0,0 +1,1325 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STATUS_READY_TIMEOUT 5000 /* microseconds */ + +/* DCC registers */ +#define DCC_HW_INFO 0x04 +#define DCC_LL_NUM_INFO 0x10 +#define DCC_LL_LOCK 0x00 +#define DCC_LL_CFG 0x04 +#define DCC_LL_BASE 0x08 +#define DCC_FD_BASE 0x0c +#define DCC_LL_OFFSET 0x80 +#define DCC_LL_TIMEOUT 0x10 +#define DCC_LL_INT_ENABLE 0x18 +#define DCC_LL_INT_STATUS 0x1c +#define DCC_LL_SW_TRIGGER 0x2c +#define DCC_LL_BUS_ACCESS_STATUS 0x30 + +/* Default value used if a bit 6 in the HW_INFO register is set. */ +#define DCC_FIX_LOOP_OFFSET 16 + +/* Mask to find version info from HW_Info register */ +#define DCC_VER_INFO_MASK BIT(9) + +#define MAX_DCC_OFFSET GENMASK(9, 2) +#define MAX_DCC_LEN GENMASK(6, 0) +#define MAX_LOOP_CNT GENMASK(7, 0) +#define MAX_LOOP_ADDR 10 + +#define DCC_ADDR_DESCRIPTOR 0x00 +#define DCC_ADDR_LIMIT 27 +#define DCC_WORD_SIZE sizeof(u32) +#define DCC_ADDR_RANGE_MASK GENMASK(31, 4) +#define DCC_LOOP_DESCRIPTOR BIT(30) +#define DCC_RD_MOD_WR_DESCRIPTOR BIT(31) +#define DCC_LINK_DESCRIPTOR GENMASK(31, 30) +#define DCC_STATUS_MASK GENMASK(1, 0) +#define DCC_LOCK_MASK BIT(0) +#define DCC_LOOP_OFFSET_MASK BIT(6) +#define DCC_TRIGGER_MASK BIT(9) + +#define DCC_WRITE_MASK BIT(15) +#define DCC_WRITE_OFF_MASK GENMASK(7, 0) +#define DCC_WRITE_LEN_MASK GENMASK(14, 8) + +#define DCC_READ_IND 0x00 +#define DCC_WRITE_IND (BIT(28)) + +#define DCC_AHB_IND 0x00 +#define DCC_APB_IND BIT(29) + +#define DCC_MAX_LINK_LIST 8 + +#define DCC_VER_MASK2 GENMASK(5, 0) + +#define DCC_SRAM_WORD_LENGTH 4 + +#define DCC_RD_MOD_WR_ADDR 0xC105E + +enum dcc_descriptor_type { + DCC_READ_TYPE, + DCC_LOOP_TYPE, + DCC_READ_WRITE_TYPE, + DCC_WRITE_TYPE +}; + +/** + * struct dcc_config_entry - configuration information related to each dcc instruction + * @base: Base address of the register to be configured in dcc + * @offset: Offset to the base address to be configured in dcc + * @len: Length of the address in words to be configured in dcc + * @loop_cnt: The number of times to loop on the register address in case + of loop instructions + * @write_val: The value to be written on the register address in case of + write instructions + * @mask: Mask corresponding to the value to be written in case of + write instructions + * @apb_bus: Type of bus to be used for the instruction, can be either + 'apb' or 'ahb' + * @desc_type: Stores the type of dcc instruction + * @list: This is used to append this instruction to the list of + instructions + */ +struct dcc_config_entry { + u32 base; + u32 offset; + u32 len; + u32 loop_cnt; + u32 write_val; + u32 mask; + bool apb_bus; + enum dcc_descriptor_type desc_type; + struct list_head list; +}; + +/** + * struct dcc_drvdata - configuration information related to a dcc device + * @base: Base Address of the dcc device + * @dev: The device attached to the driver data + * @mutex: Lock to protect access and manipulation of dcc_drvdata + * @ram_base: Base address for the SRAM dedicated for the dcc device + * @ram_size: Total size of the SRAM dedicated for the dcc device + * @ram_offset: Offset to the SRAM dedicated for dcc device + * @mem_map_ver: Memory map version of DCC hardware + * @ram_cfg: Used for address limit calculation for dcc + * @ram_start: Starting address of DCC SRAM + * @sram_dev: Miscellaneous device equivalent of dcc SRAM + * @cfg_head: Points to the head of the linked list of addresses + * @dbg_dir: The dcc debugfs directory under which all the debugfs files are placed + * @nr_link_list: Total number of linkedlists supported by the DCC configuration + * @loop_shift: Loop offset bits range for the addresses + * @enable_bitmap: Bitmap to capture the enabled status of each linked list of addresses + */ +struct dcc_drvdata { + void __iomem *base; + void __iomem *ram_base; + struct device *dev; + struct mutex mutex; + size_t ram_size; + size_t ram_offset; + int mem_map_ver; + unsigned int ram_cfg; + unsigned int ram_start; + struct miscdevice sram_dev; + struct list_head *cfg_head; + struct dentry *dbg_dir; + size_t nr_link_list; + u8 loop_shift; + unsigned long *enable_bitmap; +}; + +struct dcc_cfg_attr { + u32 addr; + u32 prev_addr; + u32 prev_off; + u32 link; + u32 sram_offset; +}; + +struct dcc_cfg_loop_attr { + u32 loop_cnt; + u32 loop_len; + u32 loop_off; + bool loop_start; +}; + +static inline u32 dcc_status(int version) +{ + return version == 1 ? 0x0c : 0x1c; +} + +static inline u32 dcc_list_offset(int version) +{ + if (version == 1) + return 0x1c; + else if (version == 2) + return 0x2c; + else + return 0x34; +} + +static inline void dcc_list_writel(struct dcc_drvdata *drvdata, + u32 ll, u32 val, u32 off) +{ + u32 offset = dcc_list_offset(drvdata->mem_map_ver) + off; + + writel(val, drvdata->base + ll * DCC_LL_OFFSET + offset); +} + +static inline u32 dcc_list_readl(struct dcc_drvdata *drvdata, u32 ll, u32 off) +{ + u32 offset = dcc_list_offset(drvdata->mem_map_ver) + off; + + return readl(drvdata->base + ll * DCC_LL_OFFSET + offset); +} + +static void dcc_sram_write_auto(struct dcc_drvdata *drvdata, + u32 val, u32 *off) +{ + /* If the overflow condition is met increment the offset + * and return to indicate that overflow has occurred + */ + if (unlikely(*off > drvdata->ram_size - 4)) { + *off += 4; + return; + } + + writel(val, drvdata->ram_base + *off); + + *off += 4; +} + +static int dcc_sw_trigger(struct dcc_drvdata *drvdata) +{ + void __iomem *addr; + int i; + u32 status; + u32 ll_cfg; + u32 tmp_ll_cfg; + u32 val; + int ret = 0; + + mutex_lock(&drvdata->mutex); + + for (i = 0; i < drvdata->nr_link_list; i++) { + if (!test_bit(i, drvdata->enable_bitmap)) + continue; + ll_cfg = dcc_list_readl(drvdata, i, DCC_LL_CFG); + tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; + dcc_list_writel(drvdata, tmp_ll_cfg, i, DCC_LL_CFG); + dcc_list_writel(drvdata, 1, i, DCC_LL_SW_TRIGGER); + dcc_list_writel(drvdata, ll_cfg, i, DCC_LL_CFG); + } + + addr = drvdata->base + dcc_status(drvdata->mem_map_ver); + if (readl_poll_timeout(addr, val, !FIELD_GET(DCC_STATUS_MASK, val), + 1, STATUS_READY_TIMEOUT)) { + dev_err(drvdata->dev, "DCC is busy after receiving sw trigger\n"); + ret = -EBUSY; + goto out_unlock; + } + + for (i = 0; i < drvdata->nr_link_list; i++) { + if (!test_bit(i, drvdata->enable_bitmap)) + continue; + + status = dcc_list_readl(drvdata, i, DCC_LL_BUS_ACCESS_STATUS); + if (!status) + continue; + + dev_err(drvdata->dev, "Read access error for list %d err: 0x%x\n", + i, status); + ll_cfg = dcc_list_readl(drvdata, i, DCC_LL_CFG); + tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; + dcc_list_writel(drvdata, tmp_ll_cfg, i, DCC_LL_CFG); + dcc_list_writel(drvdata, DCC_STATUS_MASK, i, DCC_LL_BUS_ACCESS_STATUS); + dcc_list_writel(drvdata, ll_cfg, i, DCC_LL_CFG); + ret = -ENODATA; + break; + } + +out_unlock: + mutex_unlock(&drvdata->mutex); + return ret; +} + +static void dcc_ll_cfg_reset_link(struct dcc_cfg_attr *cfg) +{ + cfg->addr = 0x00; + cfg->link = 0; + cfg->prev_off = 0; + cfg->prev_addr = cfg->addr; +} + +static void dcc_emit_read_write(struct dcc_drvdata *drvdata, + struct dcc_config_entry *entry, + struct dcc_cfg_attr *cfg) +{ + if (cfg->link) { + /* + * write new offset = 1 to continue + * processing the list + */ + + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + + /* Reset link and prev_off */ + dcc_ll_cfg_reset_link(cfg); + } + + cfg->addr = DCC_RD_MOD_WR_DESCRIPTOR; + dcc_sram_write_auto(drvdata, cfg->addr, &cfg->sram_offset); + + dcc_sram_write_auto(drvdata, entry->mask, &cfg->sram_offset); + + dcc_sram_write_auto(drvdata, entry->write_val, &cfg->sram_offset); + + cfg->addr = 0; +} + +static void dcc_emit_loop(struct dcc_drvdata *drvdata, struct dcc_config_entry *entry, + struct dcc_cfg_attr *cfg, + struct dcc_cfg_loop_attr *cfg_loop, + u32 *total_len) +{ + int loop; + + /* Check if we need to write link of prev entry */ + if (cfg->link) + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + + if (cfg_loop->loop_start) { + loop = (cfg->sram_offset - cfg_loop->loop_off) / 4; + loop |= (cfg_loop->loop_cnt << drvdata->loop_shift) & + GENMASK(DCC_ADDR_LIMIT, drvdata->loop_shift); + loop |= DCC_LOOP_DESCRIPTOR; + *total_len += (*total_len - cfg_loop->loop_len) * cfg_loop->loop_cnt; + + dcc_sram_write_auto(drvdata, loop, &cfg->sram_offset); + + cfg_loop->loop_start = false; + cfg_loop->loop_len = 0; + cfg_loop->loop_off = 0; + } else { + cfg_loop->loop_start = true; + cfg_loop->loop_cnt = entry->loop_cnt - 1; + cfg_loop->loop_len = *total_len; + cfg_loop->loop_off = cfg->sram_offset; + } + + /* Reset link and prev_off */ + dcc_ll_cfg_reset_link(cfg); +} + +static void dcc_emit_write(struct dcc_drvdata *drvdata, + struct dcc_config_entry *entry, + struct dcc_cfg_attr *cfg) +{ + u32 off; + + if (cfg->link) { + /* + * write new offset = 1 to continue + * processing the list + */ + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + + /* Reset link and prev_off */ + cfg->addr = 0x00; + cfg->prev_off = 0; + cfg->prev_addr = cfg->addr; + } + + off = entry->offset / 4; + /* write new offset-length pair to correct position */ + cfg->link |= ((off & DCC_WRITE_OFF_MASK) | DCC_WRITE_MASK | + FIELD_PREP(DCC_WRITE_LEN_MASK, entry->len)); + cfg->link |= DCC_LINK_DESCRIPTOR; + + /* Address type */ + cfg->addr = (entry->base >> 4) & GENMASK(DCC_ADDR_LIMIT, 0); + if (entry->apb_bus) + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_APB_IND; + else + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_AHB_IND; + dcc_sram_write_auto(drvdata, cfg->addr, &cfg->sram_offset); + + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + + dcc_sram_write_auto(drvdata, entry->write_val, &cfg->sram_offset); + + cfg->addr = 0x00; + cfg->link = 0; +} + +static int dcc_emit_read(struct dcc_drvdata *drvdata, + struct dcc_config_entry *entry, + struct dcc_cfg_attr *cfg, + u32 *pos, u32 *total_len) +{ + u32 off; + u32 temp_off; + + cfg->addr = (entry->base >> 4) & GENMASK(27, 0); + + if (entry->apb_bus) + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_APB_IND; + else + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_AHB_IND; + + off = entry->offset / 4; + + *total_len += entry->len * 4; + + if (!cfg->prev_addr || cfg->prev_addr != cfg->addr || cfg->prev_off > off) { + /* Check if we need to write prev link entry */ + if (cfg->link) + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + dev_dbg(drvdata->dev, "DCC: sram address 0x%x\n", cfg->sram_offset); + + /* Write address */ + dcc_sram_write_auto(drvdata, cfg->addr, &cfg->sram_offset); + + /* Reset link and prev_off */ + cfg->link = 0; + cfg->prev_off = 0; + } + + if ((off - cfg->prev_off) > 0xff || entry->len > MAX_DCC_LEN) { + dev_err(drvdata->dev, "DCC: Programming error Base: 0x%x, offset 0x%x\n", + entry->base, entry->offset); + return -EINVAL; + } + + if (cfg->link) { + /* + * link already has one offset-length so new + * offset-length needs to be placed at + * bits [29:15] + */ + *pos = 15; + + /* Clear bits [31:16] */ + cfg->link &= GENMASK(14, 0); + } else { + /* + * link is empty, so new offset-length needs + * to be placed at bits [15:0] + */ + *pos = 0; + cfg->link = 1 << 15; + } + + /* write new offset-length pair to correct position */ + temp_off = (off - cfg->prev_off) & GENMASK(7, 0); + cfg->link |= temp_off | ((entry->len << 8) & GENMASK(14, 8)) << *pos; + + cfg->link |= DCC_LINK_DESCRIPTOR; + + if (*pos) { + dcc_sram_write_auto(drvdata, cfg->link, &cfg->sram_offset); + cfg->link = 0; + } + + cfg->prev_off = off + entry->len - 1; + cfg->prev_addr = cfg->addr; + return 0; +} + +static int dcc_emit_config(struct dcc_drvdata *drvdata, unsigned int curr_list) +{ + int ret; + u32 total_len, pos; + struct dcc_config_entry *entry; + struct dcc_cfg_attr cfg = {0}; + struct dcc_cfg_loop_attr cfg_loop = {0}; + + cfg.sram_offset = drvdata->ram_cfg * 4; + total_len = 0; + + list_for_each_entry(entry, &drvdata->cfg_head[curr_list], list) { + switch (entry->desc_type) { + case DCC_READ_WRITE_TYPE: + dcc_emit_read_write(drvdata, entry, &cfg); + break; + + case DCC_LOOP_TYPE: + dcc_emit_loop(drvdata, entry, &cfg, &cfg_loop, &total_len); + break; + + case DCC_WRITE_TYPE: + dcc_emit_write(drvdata, entry, &cfg); + break; + + case DCC_READ_TYPE: + ret = dcc_emit_read(drvdata, entry, &cfg, &pos, &total_len); + if (ret) + goto err; + break; + } + } + + if (cfg.link) + dcc_sram_write_auto(drvdata, cfg.link, &cfg.sram_offset); + + if (cfg_loop.loop_start) { + dev_err(drvdata->dev, "DCC: Programming error: Loop unterminated\n"); + ret = -EINVAL; + goto err; + } + + /* Handling special case of list ending with a rd_mod_wr */ + if (cfg.addr == DCC_RD_MOD_WR_DESCRIPTOR) { + cfg.addr = (DCC_RD_MOD_WR_ADDR) & GENMASK(27, 0); + cfg.addr |= DCC_ADDR_DESCRIPTOR; + dcc_sram_write_auto(drvdata, cfg.addr, &cfg.sram_offset); + } + + /* Setting zero to indicate end of the list */ + cfg.link = DCC_LINK_DESCRIPTOR; + dcc_sram_write_auto(drvdata, cfg.link, &cfg.sram_offset); + + /* Check if sram offset exceeds the ram size */ + if (cfg.sram_offset > drvdata->ram_size) + goto overstep; + + /* Update ram_cfg and check if the data will overstep */ + drvdata->ram_cfg = (cfg.sram_offset + total_len) / 4; + + if (cfg.sram_offset + total_len > drvdata->ram_size) { + cfg.sram_offset += total_len; + goto overstep; + } + + drvdata->ram_start = cfg.sram_offset / 4; + return 0; +overstep: + ret = -EINVAL; + memset_io(drvdata->ram_base, 0, drvdata->ram_size); + +err: + return ret; +} + +static bool dcc_valid_list(struct dcc_drvdata *drvdata, unsigned int curr_list) +{ + u32 lock_reg; + + if (list_empty(&drvdata->cfg_head[curr_list])) + return false; + + if (test_bit(curr_list, drvdata->enable_bitmap)) { + dev_err(drvdata->dev, "List %d is already enabled\n", curr_list); + return false; + } + + lock_reg = dcc_list_readl(drvdata, curr_list, DCC_LL_LOCK); + if (lock_reg & DCC_LOCK_MASK) { + dev_err(drvdata->dev, "List %d is already locked\n", curr_list); + return false; + } + + return true; +} + +static bool is_dcc_enabled(struct dcc_drvdata *drvdata) +{ + int list; + + for (list = 0; list < drvdata->nr_link_list; list++) + if (test_bit(list, drvdata->enable_bitmap)) + return true; + + return false; +} + +static int dcc_enable(struct dcc_drvdata *drvdata, unsigned int curr_list) +{ + int ret; + u32 ram_cfg_base; + + mutex_lock(&drvdata->mutex); + + if (!dcc_valid_list(drvdata, curr_list)) { + ret = -EINVAL; + goto out_unlock; + } + + /* Fill dcc sram with the poison value. + * This helps in understanding bus + * hang from registers returning a zero + */ + if (!is_dcc_enabled(drvdata)) + memset_io(drvdata->ram_base, 0xde, drvdata->ram_size); + + /* 1. Take ownership of the list */ + dcc_list_writel(drvdata, DCC_LOCK_MASK, curr_list, DCC_LL_LOCK); + + /* 2. Program linked-list in the SRAM */ + ram_cfg_base = drvdata->ram_cfg; + ret = dcc_emit_config(drvdata, curr_list); + if (ret) { + dcc_list_writel(drvdata, 0, curr_list, DCC_LL_LOCK); + goto out_unlock; + } + + /* 3. Program DCC_RAM_CFG reg */ + dcc_list_writel(drvdata, ram_cfg_base + + drvdata->ram_offset / 4, curr_list, DCC_LL_BASE); + dcc_list_writel(drvdata, drvdata->ram_start + + drvdata->ram_offset / 4, curr_list, DCC_FD_BASE); + dcc_list_writel(drvdata, 0xFFF, curr_list, DCC_LL_TIMEOUT); + + /* 4. Clears interrupt status register */ + dcc_list_writel(drvdata, 0, curr_list, DCC_LL_INT_ENABLE); + dcc_list_writel(drvdata, (BIT(0) | BIT(1) | BIT(2)), + curr_list, DCC_LL_INT_STATUS); + + set_bit(curr_list, drvdata->enable_bitmap); + + /* 5. Configure trigger */ + dcc_list_writel(drvdata, DCC_TRIGGER_MASK, + curr_list, DCC_LL_CFG); + +out_unlock: + mutex_unlock(&drvdata->mutex); + return ret; +} + +static void dcc_disable(struct dcc_drvdata *drvdata, int curr_list) +{ + mutex_lock(&drvdata->mutex); + + if (!test_bit(curr_list, drvdata->enable_bitmap)) + goto out_unlock; + dcc_list_writel(drvdata, 0, curr_list, DCC_LL_CFG); + dcc_list_writel(drvdata, 0, curr_list, DCC_LL_BASE); + dcc_list_writel(drvdata, 0, curr_list, DCC_FD_BASE); + dcc_list_writel(drvdata, 0, curr_list, DCC_LL_LOCK); + clear_bit(curr_list, drvdata->enable_bitmap); +out_unlock: + mutex_unlock(&drvdata->mutex); +} + +static u32 dcc_filp_curr_list(const struct file *filp) +{ + struct dentry *dentry = file_dentry(filp); + int curr_list, ret; + + ret = kstrtoint(dentry->d_parent->d_name.name, 0, &curr_list); + if (ret) + return ret; + + return curr_list; +} + +static ssize_t enable_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + char *buf; + struct dcc_drvdata *drvdata = filp->private_data; + + mutex_lock(&drvdata->mutex); + + if (is_dcc_enabled(drvdata)) + buf = "Y\n"; + else + buf = "N\n"; + + mutex_unlock(&drvdata->mutex); + + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); +} + +static ssize_t enable_write(struct file *filp, const char __user *userbuf, + size_t count, loff_t *ppos) +{ + int ret = 0, curr_list; + bool val; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + if (curr_list < 0) + return curr_list; + + ret = kstrtobool_from_user(userbuf, count, &val); + if (ret < 0) + return ret; + + if (val) { + ret = dcc_enable(drvdata, curr_list); + if (ret) + return ret; + } else { + dcc_disable(drvdata, curr_list); + } + + return count; +} + +static const struct file_operations enable_fops = { + .read = enable_read, + .write = enable_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static ssize_t trigger_write(struct file *filp, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + int ret; + unsigned int val; + struct dcc_drvdata *drvdata = filp->private_data; + + ret = kstrtouint_from_user(user_buf, count, 0, &val); + if (ret < 0) + return ret; + + if (val != 1) + return -EINVAL; + + ret = dcc_sw_trigger(drvdata); + if (ret < 0) + return ret; + + return count; +} + +static const struct file_operations trigger_fops = { + .write = trigger_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static int dcc_config_add(struct dcc_drvdata *drvdata, unsigned int addr, + unsigned int len, bool apb_bus, int curr_list) +{ + int ret = 0; + struct dcc_config_entry *entry, *pentry; + unsigned int base, offset; + + mutex_lock(&drvdata->mutex); + + if (!len || len > drvdata->ram_size / DCC_WORD_SIZE) { + dev_err(drvdata->dev, "DCC: Invalid length\n"); + ret = -EINVAL; + goto out_unlock; + } + + base = addr & DCC_ADDR_RANGE_MASK; + + if (!list_empty(&drvdata->cfg_head[curr_list])) { + pentry = list_last_entry(&drvdata->cfg_head[curr_list], + struct dcc_config_entry, list); + + if (pentry->desc_type == DCC_READ_TYPE && + addr >= (pentry->base + pentry->offset) && + addr <= (pentry->base + pentry->offset + MAX_DCC_OFFSET)) { + /* Re-use base address from last entry */ + base = pentry->base; + + if ((pentry->len * 4 + pentry->base + pentry->offset) + == addr) { + len += pentry->len; + + if (len > MAX_DCC_LEN) + pentry->len = MAX_DCC_LEN; + else + pentry->len = len; + + addr = pentry->base + pentry->offset + + pentry->len * 4; + len -= pentry->len; + } + } + } + + offset = addr - base; + + while (len) { + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + ret = -ENOMEM; + goto out_unlock; + } + + entry->base = base; + entry->offset = offset; + entry->len = min_t(u32, len, MAX_DCC_LEN); + entry->desc_type = DCC_READ_TYPE; + entry->apb_bus = apb_bus; + INIT_LIST_HEAD(&entry->list); + list_add_tail(&entry->list, + &drvdata->cfg_head[curr_list]); + + len -= entry->len; + offset += MAX_DCC_LEN * 4; + } + +out_unlock: + mutex_unlock(&drvdata->mutex); + return ret; +} + +static ssize_t dcc_config_add_read(struct dcc_drvdata *drvdata, char *buf, int curr_list) +{ + bool bus; + int len, nval; + unsigned int base; + char apb_bus[4]; + + nval = sscanf(buf, "%x %i %3s", &base, &len, apb_bus); + if (nval <= 0 || nval > 3) + return -EINVAL; + + if (nval == 1) { + len = 1; + bus = false; + } else if (nval == 2) { + bus = false; + } else if (!strcmp("apb", apb_bus)) { + bus = true; + } else if (!strcmp("ahb", apb_bus)) { + bus = false; + } else { + return -EINVAL; + } + + return dcc_config_add(drvdata, base, len, bus, curr_list); +} + +static void dcc_config_reset(struct dcc_drvdata *drvdata) +{ + struct dcc_config_entry *entry, *temp; + int curr_list; + + mutex_lock(&drvdata->mutex); + + for (curr_list = 0; curr_list < drvdata->nr_link_list; curr_list++) { + list_for_each_entry_safe(entry, temp, + &drvdata->cfg_head[curr_list], list) { + list_del(&entry->list); + kfree(entry); + } + } + drvdata->ram_start = 0; + drvdata->ram_cfg = 0; + mutex_unlock(&drvdata->mutex); +} + +static ssize_t config_reset_write(struct file *filp, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + unsigned int val, ret; + struct dcc_drvdata *drvdata = filp->private_data; + + ret = kstrtouint_from_user(user_buf, count, 0, &val); + if (ret < 0) + return ret; + + if (val) + dcc_config_reset(drvdata); + + return count; +} + +static const struct file_operations config_reset_fops = { + .write = config_reset_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static ssize_t ready_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + int ret = 0; + char *buf; + struct dcc_drvdata *drvdata = filp->private_data; + + mutex_lock(&drvdata->mutex); + + if (!is_dcc_enabled(drvdata)) { + ret = -EINVAL; + goto out_unlock; + } + + if (!FIELD_GET(BIT(1), readl(drvdata->base + dcc_status(drvdata->mem_map_ver)))) + buf = "Y\n"; + else + buf = "N\n"; +out_unlock: + mutex_unlock(&drvdata->mutex); + + if (ret < 0) + return -EINVAL; + else + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf) + 1); +} + +static const struct file_operations ready_fops = { + .read = ready_read, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static int dcc_add_loop(struct dcc_drvdata *drvdata, unsigned long loop_cnt, int curr_list) +{ + struct dcc_config_entry *entry; + + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + entry->loop_cnt = min_t(u32, loop_cnt, MAX_LOOP_CNT); + entry->desc_type = DCC_LOOP_TYPE; + INIT_LIST_HEAD(&entry->list); + list_add_tail(&entry->list, &drvdata->cfg_head[curr_list]); + + return 0; +} + +static ssize_t dcc_config_add_loop(struct dcc_drvdata *drvdata, char *buf, int curr_list) +{ + int ret, i = 0; + char *token, *input; + char delim[2] = " "; + unsigned int val[MAX_LOOP_ADDR]; + + input = buf; + + while ((token = strsep(&input, delim)) && i < MAX_LOOP_ADDR) { + ret = kstrtoint(token, 0, &val[i++]); + if (ret) + return ret; + } + + if (token) { + dev_err(drvdata->dev, "Max limit %u of loop address exceeded", + MAX_LOOP_ADDR); + return -EINVAL; + } + + if (val[1] < 1 || val[1] > 8) + return -EINVAL; + + ret = dcc_add_loop(drvdata, val[0], curr_list); + if (ret) + return ret; + + for (i = 0; i < val[1]; i++) + dcc_config_add(drvdata, val[i + 2], 1, false, curr_list); + + return dcc_add_loop(drvdata, 1, curr_list); +} + +static int dcc_rd_mod_wr_add(struct dcc_drvdata *drvdata, unsigned int mask, + unsigned int val, int curr_list) +{ + int ret = 0; + struct dcc_config_entry *entry; + + mutex_lock(&drvdata->mutex); + + if (list_empty(&drvdata->cfg_head[curr_list])) { + dev_err(drvdata->dev, "DCC: No read address programmed\n"); + ret = -EPERM; + goto out_unlock; + } + + entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL); + if (!entry) { + ret = -ENOMEM; + goto out_unlock; + } + + entry->desc_type = DCC_READ_WRITE_TYPE; + entry->mask = mask; + entry->write_val = val; + list_add_tail(&entry->list, &drvdata->cfg_head[curr_list]); +out_unlock: + mutex_unlock(&drvdata->mutex); + return ret; +} + +static ssize_t dcc_config_add_read_write(struct dcc_drvdata *drvdata, char *buf, int curr_list) +{ + int ret; + int nval; + unsigned int addr, mask, val; + + nval = sscanf(buf, "%x %x %x", &addr, &mask, &val); + + if (nval <= 1 || nval > 3) + return -EINVAL; + + ret = dcc_config_add(drvdata, addr, 1, false, curr_list); + if (ret) + return ret; + + return dcc_rd_mod_wr_add(drvdata, mask, val, curr_list); +} + +static int dcc_add_write(struct dcc_drvdata *drvdata, unsigned int addr, + unsigned int write_val, int apb_bus, int curr_list) +{ + struct dcc_config_entry *entry; + + entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + entry->desc_type = DCC_WRITE_TYPE; + entry->base = addr & GENMASK(31, 4); + entry->offset = addr - entry->base; + entry->write_val = write_val; + entry->len = 1; + entry->apb_bus = apb_bus; + list_add_tail(&entry->list, &drvdata->cfg_head[curr_list]); + + return 0; +} + +static ssize_t dcc_config_add_write(struct dcc_drvdata *drvdata, char *buf, int curr_list) +{ + bool bus; + int nval; + unsigned int addr, write_val; + char apb_bus[4]; + + nval = sscanf(buf, "%x %x %3s", &addr, &write_val, apb_bus); + + if (nval <= 1 || nval > 3) + return -EINVAL; + + if (nval == 2) + bus = true; + + if (nval == 3) { + if (!strcmp("apb", apb_bus)) + bus = true; + else if (!strcmp("ahb", apb_bus)) + bus = false; + else + return -EINVAL; + } + + return dcc_add_write(drvdata, addr, write_val, bus, curr_list); +} + +static int config_show(struct seq_file *m, void *data) +{ + struct dcc_drvdata *drvdata = m->private; + struct dcc_config_entry *entry; + int index = 0, curr_list; + + curr_list = dcc_filp_curr_list(m->file); + if (curr_list < 0) + return curr_list; + + mutex_lock(&drvdata->mutex); + + list_for_each_entry(entry, &drvdata->cfg_head[curr_list], list) { + index++; + switch (entry->desc_type) { + case DCC_READ_WRITE_TYPE: + seq_printf(m, "RW mask: 0x%x, val: 0x%x\n index: 0x%x\n", + entry->mask, entry->write_val, index); + break; + case DCC_LOOP_TYPE: + seq_printf(m, "L index: 0x%x Loop: %d\n", index, entry->loop_cnt); + break; + case DCC_WRITE_TYPE: + seq_printf(m, "W Base:0x%x, Offset: 0x%x, val: 0x%x, APB: %d\n, Index: 0x%x\n", + entry->base, entry->offset, entry->write_val, entry->apb_bus, + index); + break; + case DCC_READ_TYPE: + seq_printf(m, "R Base:0x%x, Offset: 0x%x, len: 0x%x, APB: %d\n, Index: 0x%x\n", + entry->base, entry->offset, entry->len, entry->apb_bus, index); + } + } + mutex_unlock(&drvdata->mutex); + return 0; +} + +static int config_open(struct inode *inode, struct file *file) +{ + struct dcc_drvdata *drvdata = inode->i_private; + + return single_open(file, config_show, drvdata); +} + +static ssize_t config_write(struct file *filp, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + int ret, curr_list; + char *token, buf[50]; + char *bufp = buf; + char *delim = " "; + struct dcc_drvdata *drvdata = filp->private_data; + + if (count > sizeof(buf) || count == 0) + return -EINVAL; + + ret = copy_from_user(buf, user_buf, count); + if (ret) + return -EFAULT; + + curr_list = dcc_filp_curr_list(filp); + if (curr_list < 0) + return curr_list; + + if (buf[count - 1] == '\n') + buf[count - 1] = '\0'; + else + return -EINVAL; + + token = strsep(&bufp, delim); + + if (!strcmp("R", token)) { + ret = dcc_config_add_read(drvdata, bufp, curr_list); + } else if (!strcmp("W", token)) { + ret = dcc_config_add_write(drvdata, bufp, curr_list); + } else if (!strcmp("RW", token)) { + ret = dcc_config_add_read_write(drvdata, bufp, curr_list); + } else if (!strcmp("L", token)) { + ret = dcc_config_add_loop(drvdata, bufp, curr_list); + } else { + dev_err(drvdata->dev, "%s is not a correct input\n", token); + return -EINVAL; + } + + if (ret) + return ret; + + return count; +} + +static const struct file_operations config_fops = { + .open = config_open, + .read = seq_read, + .write = config_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static void dcc_delete_debug_dir(struct dcc_drvdata *drvdata) +{ + debugfs_remove_recursive(drvdata->dbg_dir); +}; + +static void dcc_create_debug_dir(struct dcc_drvdata *drvdata) +{ + int i; + char list_num[10]; + struct dentry *dcc_dev, *list; + struct device *dev = drvdata->dev; + + drvdata->dbg_dir = debugfs_create_dir(KBUILD_MODNAME, NULL); + dcc_dev = debugfs_create_dir(dev_name(dev), drvdata->dbg_dir); + + for (i = 0; i <= drvdata->nr_link_list; i++) { + sprintf(list_num, "%d", i); + list = debugfs_create_dir(list_num, dcc_dev); + debugfs_create_file("enable", 0600, list, drvdata, &enable_fops); + debugfs_create_file("config", 0600, list, drvdata, &config_fops); + } + + debugfs_create_file("trigger", 0200, drvdata->dbg_dir, drvdata, &trigger_fops); + debugfs_create_file("ready", 0400, drvdata->dbg_dir, drvdata, &ready_fops); + debugfs_create_file("config_reset", 0200, drvdata->dbg_dir, + drvdata, &config_reset_fops); +} + +static ssize_t dcc_sram_read(struct file *file, char __user *data, + size_t len, loff_t *ppos) +{ + unsigned char *buf; + struct dcc_drvdata *drvdata; + + drvdata = container_of(file->private_data, struct dcc_drvdata, + sram_dev); + + /* EOF check */ + if (*ppos >= drvdata->ram_size) + return 0; + + if ((*ppos + len) > drvdata->ram_size) + len = (drvdata->ram_size - *ppos); + + buf = kzalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy_fromio(buf, drvdata->ram_base + *ppos, len); + + if (copy_to_user(data, buf, len)) { + kfree(buf); + return -EFAULT; + } + + *ppos += len; + + kfree(buf); + + return len; +} + +static const struct file_operations dcc_sram_fops = { + .owner = THIS_MODULE, + .read = dcc_sram_read, + .llseek = no_llseek, +}; + +static int dcc_sram_dev_init(struct dcc_drvdata *drvdata) +{ + drvdata->sram_dev.minor = MISC_DYNAMIC_MINOR; + drvdata->sram_dev.name = "dcc_sram"; + drvdata->sram_dev.fops = &dcc_sram_fops; + + return misc_register(&drvdata->sram_dev); +} + +static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata) +{ + misc_deregister(&drvdata->sram_dev); +} + +static int dcc_probe(struct platform_device *pdev) +{ + u32 val; + int ret = 0, i; + struct device *dev = &pdev->dev; + struct dcc_drvdata *drvdata; + struct resource *res; + + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->dev = &pdev->dev; + platform_set_drvdata(pdev, drvdata); + + drvdata->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(drvdata->base)) + return PTR_ERR(drvdata->base); + + drvdata->ram_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res); + if (IS_ERR(drvdata->ram_base)) + return PTR_ERR(drvdata->ram_base); + + drvdata->ram_size = resource_size(res); + + drvdata->ram_offset = (size_t)of_device_get_match_data(&pdev->dev); + + val = readl(drvdata->base + DCC_HW_INFO); + + if (FIELD_GET(DCC_VER_INFO_MASK, val)) { + drvdata->mem_map_ver = 3; + drvdata->nr_link_list = readl(drvdata->base + DCC_LL_NUM_INFO); + if (!drvdata->nr_link_list) + return -EINVAL; + } else if ((val & DCC_VER_MASK2) == DCC_VER_MASK2) { + drvdata->mem_map_ver = 2; + drvdata->nr_link_list = readl(drvdata->base + DCC_LL_NUM_INFO); + if (!drvdata->nr_link_list) + return -EINVAL; + } else { + drvdata->mem_map_ver = 1; + drvdata->nr_link_list = DCC_MAX_LINK_LIST; + } + + /* Either set the fixed loop offset or calculate + * it from the total number of words in dcc_sram. + * Max consecutive addresses dcc can loop is + * equivalent to the words in dcc_sram. + */ + if (val & DCC_LOOP_OFFSET_MASK) + drvdata->loop_shift = DCC_FIX_LOOP_OFFSET; + else + drvdata->loop_shift = get_bitmask_order((drvdata->ram_offset + + drvdata->ram_size) / DCC_SRAM_WORD_LENGTH - 1); + + mutex_init(&drvdata->mutex); + + drvdata->enable_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), + sizeof(*drvdata->enable_bitmap), GFP_KERNEL); + if (!drvdata->enable_bitmap) + return -ENOMEM; + + drvdata->cfg_head = devm_kcalloc(dev, drvdata->nr_link_list, + sizeof(*drvdata->cfg_head), GFP_KERNEL); + if (!drvdata->cfg_head) + return -ENOMEM; + + for (i = 0; i < drvdata->nr_link_list; i++) + INIT_LIST_HEAD(&drvdata->cfg_head[i]); + + ret = dcc_sram_dev_init(drvdata); + if (ret) { + dev_err(drvdata->dev, "DCC: sram node not registered.\n"); + return ret; + } + + dcc_create_debug_dir(drvdata); + + return 0; +} + +static int dcc_remove(struct platform_device *pdev) +{ + struct dcc_drvdata *drvdata = platform_get_drvdata(pdev); + + dcc_delete_debug_dir(drvdata); + dcc_sram_dev_exit(drvdata); + dcc_config_reset(drvdata); + + return 0; +} + +static const struct of_device_id dcc_match_table[] = { + { .compatible = "qcom,sc7180-dcc", .data = (void *)0x6000 }, + { .compatible = "qcom,sc7280-dcc", .data = (void *)0x12000 }, + { .compatible = "qcom,sdm845-dcc", .data = (void *)0x6000 }, + { .compatible = "qcom,sm8150-dcc", .data = (void *)0x5000 }, + { } +}; +MODULE_DEVICE_TABLE(of, dcc_match_table); + +static struct platform_driver dcc_driver = { + .probe = dcc_probe, + .remove = dcc_remove, + .driver = { + .name = "qcom-dcc", + .of_match_table = dcc_match_table, + }, +}; + +module_platform_driver(dcc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Qualcomm Technologies Inc. DCC driver"); + From patchwork Fri May 5 06:36:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Souradeep Chowdhury X-Patchwork-Id: 13232181 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 31994C77B7C for ; Fri, 5 May 2023 06:38:10 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=4pZ19pLXA/9DK3ozpaStAJuxvpY6UMqANJ0pFrBoZXI=; b=thAvU+mCRx6Sog vZGkVGqq32/MYZYrh4az/kPh4PU2aSpNU96JZbv8TFDXMrdRun9V4pgkpYHkyWHAXtN6stpIwSzHX TCpleGMuPomXbQy0+//NyDTHhlMnCbZ3NEfw1a6sFFkxGq1M6/hsxhV+Rt54sPMBADjMyjRmp7qW0 eGukwrZxSAdS3QSC00dsdbUAv0WOaYB12ullgfgRlAZsXamDSLSaB6Vt6dNqkxN2zeesbMomXpeS4 GgkueEt5X1Hvs7JyBU6q3rIu6rdsVO9Ci7T7AP5tpJFWwlxFmqtHicE+bCdEpkWft0htanx86HMrQ HaOLZlsxC7fNWgc8+zKQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pup47-009q9L-0C; Fri, 05 May 2023 06:37:15 +0000 Received: from mx0a-0031df01.pphosted.com ([205.220.168.131]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pup42-009q7L-2p for linux-arm-kernel@lists.infradead.org; Fri, 05 May 2023 06:37:12 +0000 Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 34567Dr7026814; Fri, 5 May 2023 06:36:58 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=s1UdkRzzF8cFAQcoYxajxf72HMv1k5ObWuqkwuK/fiM=; b=lD13AUn8nQAnwH9vqOHayl65rJeqVohdmPfJL2Tl5g9vAXAa7YJUew6jRiX9W0izkD9p P7vtOqtR0PPGrOSNsphLh1YY8yX3Sy0AagGjlmei0EOTvchqwp3T0V7cxueZgQYdocZ9 kA7Rk4eMtTh/BWkciRRsWKrds+a9ZueFVjTEU1a4SbyM5uGeW9h5G7I7D8uPQ8maY73Y NHdHPGv5GeFGK2tK2LLLAQb4pSyt8lCdTxVA4UgVofIbFh2n9SRnSUnMrZ41gQWR0YSc IQLOuN7oVSGQZySctgf3//lCR5aAa3QQDD8pLIsNovjDZLJ5YfKQKsC93AuFau5wq8K5 IQ== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qctfu897v-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 05 May 2023 06:36:58 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3456av1s007763 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 5 May 2023 06:36:57 GMT Received: from hu-schowdhu-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Thu, 4 May 2023 23:36:56 -0700 From: Souradeep Chowdhury To: Andy Gross , Konrad Dybcio , Krzysztof Kozlowski , Bjorn Andersson , Rob Herring , Alex Elder , Arnd Bergmann , Greg Kroah-Hartman CC: , , , , Sibi Sankar , Rajendra Nayak , Souradeep Chowdhury Subject: [PATCH V23 3/3] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support Date: Thu, 4 May 2023 23:36:23 -0700 Message-ID: X-Mailer: git-send-email 2.17.1 In-Reply-To: References: MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01c.na.qualcomm.com (10.47.97.35) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: dOba35aUKxDYJDAZyitMJ4OKdpyJBOQo X-Proofpoint-ORIG-GUID: dOba35aUKxDYJDAZyitMJ4OKdpyJBOQo X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-04_15,2023-05-04_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 mlxlogscore=744 lowpriorityscore=0 malwarescore=0 suspectscore=0 spamscore=0 mlxscore=0 phishscore=0 adultscore=0 priorityscore=1501 bulkscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305050056 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230504_233710_922282_9F1BEC0E X-CRM114-Status: GOOD ( 16.25 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add the entries for all the files added as a part of driver support for DCC(Data Capture and Compare). Signed-off-by: Souradeep Chowdhury --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index cb932c6f8959..30b0e23cd31e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5721,6 +5721,14 @@ W: http://lists.twibble.org/mailman/listinfo/dc395x/ F: Documentation/scsi/dc395x.rst F: drivers/scsi/dc395x.* +DCC QTI DRIVER +M: Souradeep Chowdhury +L: linux-arm-msm@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/debugfs-driver-dcc +F: Documentation/devicetree/bindings/misc/qcom,dcc.yaml +F: drivers/misc/qcom-dcc.c + DCCP PROTOCOL L: dccp@vger.kernel.org S: Orphan