From patchwork Wed May 17 13:33:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245027 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 50AF4C7EE22 for ; Wed, 17 May 2023 13:33:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=gOz/2pQEFIEFYITLls7i/ZnDmm90BgeNHTgl/ePBKeQ=; b=b40VqyZRuNR4ZL DjSoazcoYliJdVEKGftZKmLkJzN/6815xNxIahQEjQVv2eXUNc3v7NjkbqzWrdQpzlugfdaOm4J5t n+4cUgSzU7hVZkZ6vzvAAsr2RVfhILmnY36DwRvg8raEAZxKakgayRj9UDD69hU09RKzW4EjSp9xf y1q+oDchLtLJHhlhLiP7ZHtfMNtbnygAwwlUuopZphEegwE/dC60p1HIHx5c7I06kz9QoexdM3FZ1 b+YSUWtpZFdgoGX0HdJTLMG2glDfHwJBiU0yVs6bbKSurG2Xp1mlrzILy5x/bQt35tHNNZbL/KtIQ 56Bnk1mynYsNqLeaDchQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHV-009zYc-05; Wed, 17 May 2023 13:33:29 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHP-009zVV-35; Wed, 17 May 2023 13:33:26 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 7CB745FD0E; Wed, 17 May 2023 16:33:18 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330398; bh=qcIGKcZIb5cUrNAdB7ZZAIiITgzMPRGFSQuzjV413Y4=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=kOxUmry0bB0U7YsNs+U2p6wYwYVFyN9q9QDGGaQp5k8XZYdqjRdUH+itPl97KarPg Nzz+eBrYa1XjWDN6jKKtcyG92/yrbBb22q66XyIU8WNnyR32M5LrsBRQxdgjojnzCb NFWoOaCp++jy+KQmyKBPcNZp7k2FBkfEp4dQG7v9xezXLdGroN51NntZ46qZX9B22Q 2YRXs7qyE7Vraj6uetHRtPI/7RQXjGMtS3UETTNMPfx4CZL9aS4FUMwk6yWql9kS0z LKeYtpNQzdGo4MEMWOftgmQg2BFw/TVIpryeGDMFeVHKooXwN7OHWkSJTbQ12jNTWK APQKKOc5W57zA== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:18 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v15 1/6] clk: meson: make pll rst bit as optional Date: Wed, 17 May 2023 16:33:04 +0300 Message-ID: <20230517133309.9874-2-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063324_723094_BA7C2F95 X-CRM114-Status: GOOD ( 13.47 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Compared with the previous SoCs, self-adaption current module is newly added for A1, and there is no reset parameter except the fixed pll. Since we use clk-pll generic driver for A1 pll implementation, rst bit should be optional to support new behavior. Signed-off-by: Jian Hu Acked-by: Martin Blumenstingl Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/clk-pll.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index afefeba6e458..314ca945a4d0 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -295,10 +295,14 @@ static int meson_clk_pll_init(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); if (pll->init_count) { - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); + regmap_multi_reg_write(clk->map, pll->init_regs, pll->init_count); - meson_parm_write(clk->map, &pll->rst, 0); + + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); } return 0; @@ -309,8 +313,11 @@ static int meson_clk_pll_is_enabled(struct clk_hw *hw) struct clk_regmap *clk = to_clk_regmap(hw); struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); - if (meson_parm_read(clk->map, &pll->rst) || - !meson_parm_read(clk->map, &pll->en) || + if (MESON_PARM_APPLICABLE(&pll->rst) && + meson_parm_read(clk->map, &pll->rst)) + return 0; + + if (!meson_parm_read(clk->map, &pll->en) || !meson_parm_read(clk->map, &pll->l)) return 0; @@ -341,13 +348,15 @@ static int meson_clk_pll_enable(struct clk_hw *hw) return 0; /* Make sure the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Enable the pll */ meson_parm_write(clk->map, &pll->en, 1); /* Take the pll out reset */ - meson_parm_write(clk->map, &pll->rst, 0); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); if (meson_clk_pll_wait_lock(hw)) return -EIO; @@ -361,7 +370,8 @@ static void meson_clk_pll_disable(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); /* Put the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); From patchwork Wed May 17 13:33:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245026 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 32673C7EE23 for ; Wed, 17 May 2023 13:33:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=NqA5QfvWbLm7GX7ocdMFtVXwXOAulaqIjavDS4Tm1FA=; b=yz5G4nChTkcEhz oRdR6sqS8VR6U3ru6zxCPM0wxKThPJJOGtA5mgf6BJP4sp7BvjidYtozx9ESKVKOxq5Xpc//q/su1 czmWL0q7X6vkR6M+96gUjleparywgNgLszYf9FIFyOJMD94Pa00EPiRIrxyhmQ/dhm1BXrJ6G+nK+ S+7G5+kHVSRvJzW2/Esbh2TWs/kCSpFaixsGUCbks9Vv+HBsENlYECtKJF/7krPJIqFs41/vr9BTb Js3c3YVHRjWnfowaPjOpLEn/H2K6GYSLFm1OYX2SRIuDdshRGJwxR77Il0ugtQuduLZdDW6JAcFTt 6J3ethk07bPGpps1edpg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHV-009zZH-2y; Wed, 17 May 2023 13:33:29 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHP-009zVi-35; Wed, 17 May 2023 13:33:26 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 91C985FD41; Wed, 17 May 2023 16:33:19 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330399; bh=QACcL2z5H0WiVPZBqWtG1qVoEZA/+FwC6rxiZKbXGhQ=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=To0UAMRRCsiOa8mJt5lOncXyFFFzVAvZviJhaP/4gz0jRfmzC5LoL+VpQ71VHDBZt m5/rAYPTvjA3NjfyPeLK1HB4wGNx0mT9pCg+DxfdTd2zWsDMKD03BAv5+8U1Mm9jxo ctpmYKApMqYeV5jmIAvtg5PYEaWxiTKYqbAO6UpoiXP6Kmy3Kun8wfLfRzfdtdIxFp DU2Mg2quaumgRXsIa59m35zjzCZvYak3v9y4u7hV2xJ1/j2wu1G2B+5VtRdFPzQeUT iPRiwfhS2l4GynCItIVzfDho52V7Pkr5zEpMAVmo0xVoaSJeg1uaGEFUHRFxwzKqp8 ppRA4ZVkOBysA== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:19 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v15 2/6] clk: meson: introduce new pll power-on sequence for A1 SoC family Date: Wed, 17 May 2023 16:33:05 +0300 Message-ID: <20230517133309.9874-3-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063324_712930_44E7167A X-CRM114-Status: GOOD ( 14.70 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Modern meson PLL IPs are a little bit different from early known PLLs. The main difference is located in the init/enable/disable sequences; the rate logic is the same. In A1 PLL, the PLL enable sequence is different, so add new optional pll reg bits and use the new power-on sequence to enable the PLL: 1. enable the pll, delay for 10us 2. enable the pll self-adaption current module, delay for 40us 3. enable the lock detect module Signed-off-by: Jian Hu Acked-by: Martin Blumenstingl Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/clk-pll.c | 23 +++++++++++++++++++++++ drivers/clk/meson/clk-pll.h | 2 ++ 2 files changed, 25 insertions(+) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index 314ca945a4d0..56ec2210f1ad 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -358,6 +358,25 @@ static int meson_clk_pll_enable(struct clk_hw *hw) if (MESON_PARM_APPLICABLE(&pll->rst)) meson_parm_write(clk->map, &pll->rst, 0); + /* + * Compared with the previous SoCs, self-adaption current module + * is newly added for A1, keep the new power-on sequence to enable the + * PLL. The sequence is: + * 1. enable the pll, delay for 10us + * 2. enable the pll self-adaption current module, delay for 40us + * 3. enable the lock detect module + */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) { + usleep_range(10, 20); + meson_parm_write(clk->map, &pll->current_en, 1); + usleep_range(40, 50); + }; + + if (MESON_PARM_APPLICABLE(&pll->l_detect)) { + meson_parm_write(clk->map, &pll->l_detect, 1); + meson_parm_write(clk->map, &pll->l_detect, 0); + } + if (meson_clk_pll_wait_lock(hw)) return -EIO; @@ -375,6 +394,10 @@ static void meson_clk_pll_disable(struct clk_hw *hw) /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); + + /* Disable PLL internal self-adaption current module */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) + meson_parm_write(clk->map, &pll->current_en, 0); } static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h index 367efd0f6410..a2228c0fdce5 100644 --- a/drivers/clk/meson/clk-pll.h +++ b/drivers/clk/meson/clk-pll.h @@ -36,6 +36,8 @@ struct meson_clk_pll_data { struct parm frac; struct parm l; struct parm rst; + struct parm current_en; + struct parm l_detect; const struct reg_sequence *init_regs; unsigned int init_count; const struct pll_params_table *table; From patchwork Wed May 17 13:33:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245029 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E4C25C77B75 for ; Wed, 17 May 2023 13:34:08 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=5E+4Tx29s3Ja3pBJ9FlmuyHYVV7rvjWb4XjKI/49wcc=; b=JrMKsNHc4LV+U0 IYhfoc9zSs51DfxIQtCJ1En3y9kDqprmgcJGL+N2F5pK7TsukBdBPdStIzVJBzSQ36mOaaPuiP4BB bz9Xl5TROZbnovF1qF/NB07aTzC98J+PgmCLLH2SMLVy3fZlR2F/b2Iet47VMtc896kkBdjSsqvTl JwE3HrZJjaXs+u0OWnrtozUmsE/fwTeNqlLhy4PWattrifWBjaFR6wS5Ufe6B+kVTfGJ7+icaIQtp YIuP4NffSXnrS2qM0cZiV1juLH/4ka+iQMSbdPHiQd0AAe532pYNagROmoH5PJv+LkN8udxmrDQmK eMFkUI3DgDk4kRuAZt5w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHh-009zfa-0w; Wed, 17 May 2023 13:33:41 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHP-009zVk-35; Wed, 17 May 2023 13:33:28 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id A72B65FD42; Wed, 17 May 2023 16:33:20 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330400; bh=ywVAWUW9jbvz+vfZY+snT7ksvWRteTwJF8+dCOusnpE=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=b6v6AwBVkVNi64/YeYKUac+FF20aZtFI2HiB/cTaDT8NOLJ/ESyouM3CaqnxViWmq MN/6+oH+Iji2LX5Bz/ZCmid3FILW1qjRUAyMy+M4SEiOXO6xQ5isSqEnpuNe47HjIb /3m0Xk2MAwNhfVcCfbxd/QHp+2iVfsX2dNAaf2d17lzOs057uJ63/puybGBXo4P1CM YRhIM81sweKkOEMEP6DegVJIfJ0iBk3uJHITBSesT0hfYKSaY6yiz/o9T2QtFL7qCz VbRm7cpsy/Ke9a0kVV975BjQIX+1WStPBMn0Ca87cJg+N8NFQBdx3s2hF35BuTiIpp LP6rHqUID3tuw== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:20 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov , Rob Herring Subject: [PATCH v15 3/6] dt-bindings: clock: meson: add A1 PLL clock controller bindings Date: Wed, 17 May 2023 16:33:06 +0300 Message-ID: <20230517133309.9874-4-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063324_720326_EE37123B X-CRM114-Status: GOOD ( 15.17 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add the documentation and dt bindings for Amlogic A1 PLL clock controller. Also include new A1 clock controller dt bindings to MAINTAINERS. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov Reviewed-by: Rob Herring Reviewed-by: Martin Blumenstingl --- .../bindings/clock/amlogic,a1-pll-clkc.yaml | 58 +++++++++++++++++++ MAINTAINERS | 1 + .../dt-bindings/clock/amlogic,a1-pll-clkc.h | 20 +++++++ 3 files changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml create mode 100644 include/dt-bindings/clock/amlogic,a1-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..5c6fa620a63c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 PLL Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-pll-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixpll_in + - description: input hifipll_in + + clock-names: + items: + - const: fixpll_in + - const: hifipll_in + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs_fixpll_in>, + <&clkc_periphs_hifipll_in>; + clock-names = "fixpll_in", "hifipll_in"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 39ff1a717625..8438bc9bd636 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1895,6 +1895,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/a1* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h new file mode 100644 index 000000000000..01fb8164ac29 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_CLKC_H +#define __A1_PLL_CLKC_H + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 6 +#define CLKID_FCLK_DIV3 7 +#define CLKID_FCLK_DIV5 8 +#define CLKID_FCLK_DIV7 9 +#define CLKID_HIFI_PLL 10 + +#endif /* __A1_PLL_CLKC_H */ From patchwork Wed May 17 13:33:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245030 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id EB308C7EE23 for ; Wed, 17 May 2023 13:34:10 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=9d3ymgaLnrxIu1NMxP4e7MgqK3DdtqoUSkj7P5OvE4g=; b=Nq73Js0o2u4KeO lGZyi69hZ7zciR7RWyZuvkHqOHI/t7/M17bGVTBI5MiiyhPGdr+OUzk2cRBgwjZiifzt/JS65TDxb NKv2zB+Mi99Rm5gM1vMl/3aL47689O2C/kQwlUZ8tWLVdbZwSi7wWaHubjkKK1Ku2Uvqo0BhLCLjC YVT93Gj/AYGpL93ae64N6mpZV0soc/4o671lW5qYF2W05fJoN66DvZ63HAUPLbIBCsjP52JUFbRFo 5KvOBDY6zSTLrTfNScTXEkOZV1twrhe+vtJ8KdcyocIHEPOGbgMTo4ykGo6DQwS3sHDiNqhN2X6p3 faJ1xGHwS9i5OVBRbcvw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHi-009zh3-36; Wed, 17 May 2023 13:33:42 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHP-009zVm-35; Wed, 17 May 2023 13:33:29 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id BFD2A5FD43; Wed, 17 May 2023 16:33:21 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330401; bh=DyJQ2Zx+sDj5CbE4dMe8X5DKPk55/KFK99bu8+GoP8k=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=lfTlJP0OY9ilKGybnBdudg3XEqNuhiZpHFgCLaspY/81eveUoWNG2Y4tW56a2NKkk ZC/d/jVnCfp2LCkEZ8OdfaQ6FSrHIEyG5gtqbasPTygI+m8CiX07GwQLDmIucQF/zj pBG8vJsGnqLGKMoRHQfWsMNXh5IYd/7qrvEkQdVcVc60Bx4JUuia6El0OnIbP5211p /oQ/oEJffPBPMYhyJDLg+FzQ1a7tRHosAD8j7BIv5A82ea45oTjylJ6LIgKIHnnTyf +om2N585wpEGLRfalHktFhTdlXckdaDUYgzN8qgzQVxfB9OlJ6I8ig8AnyWT/+QAH3 mTfObkbwald7w== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:21 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v15 4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver Date: Wed, 17 May 2023 16:33:07 +0300 Message-ID: <20230517133309.9874-5-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063324_734465_9FDEF919 X-CRM114-Status: GOOD ( 28.87 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Introduce PLL clock controller for Amlogic A1 SoC family. The clock unit is an APB slave module that is designed for generating all of the internal and system clocks. The SoC uses an external 24MHz crystal; there are 4 internal PLLs: SYS_PLL/HIFI_PLL/USB_PLL/(FIXPLL), these PLLs generate 27 clock sources. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov Reviewed-by: Martin Blumenstingl --- drivers/clk/meson/Kconfig | 10 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-pll.c | 356 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1-pll.h | 47 +++++ 4 files changed, 414 insertions(+) create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..693c4cf60f27 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -99,6 +99,16 @@ config COMMON_CLK_AXG_AUDIO Support for the audio clock controller on AmLogic A113D devices, aka axg, Say Y if you want audio subsystem to work. +config COMMON_CLK_A1_PLL + tristate "Amlogic A1 SoC PLL controller support" + depends on ARM64 + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + help + Support for the PLL clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 PLL clock controller + to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..2f17f475a48f 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c new file mode 100644 index 000000000000..bd2f1d1ec6e4 --- /dev/null +++ b/drivers/clk/meson/a1-pll.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1-pll.h" +#include "clk-regmap.h" + +static struct clk_regmap fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_STS, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fixpll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixed_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixed_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range hifi_pll_mult_range = { + .min = 32, + .max = 64, +}; + +static const struct reg_sequence hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 }, +}; + +static struct clk_regmap hifi_pll = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_STS, + .shift = 31, + .width = 1, + }, + .current_en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 26, + .width = 1, + }, + .l_detect = { + .reg_off = ANACTRL_HIFIPLL_CTRL2, + .shift = 6, + .width = 1, + }, + .range = &hifi_pll_mult_range, + .init_regs = hifi_init_regs, + .init_count = ARRAY_SIZE(hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &meson_clk_pll_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "hifipll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_div.hw + }, + .num_parents = 1, + /* + * This clock is used by DDR clock in BL2 firmware + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div3_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div5_div.hw + }, + .num_parents = 1, + /* + * This clock is used by AXI bus which setted in Romcode + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +/* Array of all clocks registered by this provider */ +static struct clk_hw_onecell_data a1_pll_clks = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw, + [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw, + [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw, + [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw, + [CLKID_FCLK_DIV2] = &fclk_div2.hw, + [CLKID_FCLK_DIV3] = &fclk_div3.hw, + [CLKID_FCLK_DIV5] = &fclk_div5.hw, + [CLKID_FCLK_DIV7] = &fclk_div7.hw, + [CLKID_HIFI_PLL] = &hifi_pll.hw, + [NR_PLL_CLKS] = NULL, + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const a1_pll_regmaps[] = { + &fixed_pll_dco, + &fixed_pll, + &fclk_div2, + &fclk_div3, + &fclk_div5, + &fclk_div7, + &hifi_pll, +}; + +static struct regmap_config a1_pll_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++) + a1_pll_regmaps[i]->map = map; + + /* Register clocks */ + for (clkid = 0; clkid < a1_pll_clks.num; clkid++) { + err = devm_clk_hw_register(dev, a1_pll_clks.hws[clkid]); + if (err) + return dev_err_probe(dev, err, + "clock[%d] registration failed\n", + clkid); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_pll_clks); +} + +static const struct of_device_id a1_pll_clkc_match_table[] = { + { .compatible = "amlogic,a1-pll-clkc", }, + {} +}; +MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table); + +static struct platform_driver a1_pll_clkc_driver = { + .probe = meson_a1_pll_probe, + .driver = { + .name = "a1-pll-clkc", + .of_match_table = a1_pll_clkc_match_table, + }, +}; + +module_platform_driver(a1_pll_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h new file mode 100644 index 000000000000..29726651b056 --- /dev/null +++ b/drivers/clk/meson/a1-pll.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic A1 PLL Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_H +#define __A1_PLL_H + +#include "clk-pll.h" + +/* PLL register offset */ +#define ANACTRL_FIXPLL_CTRL0 0x0 +#define ANACTRL_FIXPLL_CTRL1 0x4 +#define ANACTRL_FIXPLL_STS 0x14 +#define ANACTRL_HIFIPLL_CTRL0 0xc0 +#define ANACTRL_HIFIPLL_CTRL1 0xc4 +#define ANACTRL_HIFIPLL_CTRL2 0xc8 +#define ANACTRL_HIFIPLL_CTRL3 0xcc +#define ANACTRL_HIFIPLL_CTRL4 0xd0 +#define ANACTRL_HIFIPLL_STS 0xd4 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +/* + * CLKID index values for internal clocks + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 3 +#define CLKID_FCLK_DIV5_DIV 4 +#define CLKID_FCLK_DIV7_DIV 5 +#define NR_PLL_CLKS 11 + +#endif /* __A1_PLL_H */ From patchwork Wed May 17 13:33:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245032 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 84BA2C7EE2A for ; Wed, 17 May 2023 13:34:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=d9KIK5daO1WxEu8gwrd6XDUMiKQ+ndnnLaj0Ora+R68=; b=P48umy5W7+T1ex /Cad1HrcMftnxAhxFIsj/Qa7Bl2705WV1y26gxlq2vWiIFRloxs1IjZKnDILkehQQ0w9yxkv+aeFq GkCdZfcj9gInw5Egc2Ll/CIGYFL3e9fbHrrG7bURrUw8P3evZdFfmz8pWhINKb7b91A1WGAZ/66mk XoJXKDSw3BY3E7gn1YwQm1ucumPEZivc6FtBWAZC3neJb+oitLn+zs3cN//uynFwZdvHqOw4dvItO cJeU8vPeB76IWhTFRIeiVSTQeXh43qNKoTmqqBMd/b2BNtEd0Vu/U5sEjq3YnMKB7snsHoG6ZEiAf dESEsyFmKss1BXC87KpA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHk-009zif-24; Wed, 17 May 2023 13:33:44 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHU-009zXY-0O; Wed, 17 May 2023 13:33:30 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id A80365FD44; Wed, 17 May 2023 16:33:22 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330402; bh=tBTHQtZLBVMM1xJ2CHesO19/Ord/PD+KOb5QmIbiZGc=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=sYF1zgjNQXXZFEAwyOsa9xhRfu/SbiwSUHGb03fLk9hkK3qST0v0QIFnpa5kw4ZNE ITkIAQIYe7cbx8mvirEZmY/Ju92Y/SWMi/a660NimMuqd6euuN4pRl9sdQmzppg2/h H55/IUFGFolgCUD7VqBlrtT4++jlWPieHIo1rufr07xq3dyMLpQzt6IwoJ5HswHei/ OwoKWt23LEGKILgJphPAuJ2vZv47qLiDw98Yu4bMvDy9tv7luyNo1eKrU458yEwTDD juNNlvHmo+vezT3X3gWQ+sVyZVfnupnxtS7tOuY2p4KaNLgiJ0EobBFAF8uwNcODH6 GI5mF/7W9yGnQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:22 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v15 5/6] dt-bindings: clock: meson: add A1 Peripherals clock controller bindings Date: Wed, 17 May 2023 16:33:08 +0300 Message-ID: <20230517133309.9874-6-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063328_538927_EE4E9CAF X-CRM114-Status: GOOD ( 14.90 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add documentation and dt bindings for the Amlogic A1 Peripherals clock controller. A1 PLL clock controller has references to A1 Peripherals clock controller objects, so reflect them in the schema. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- .../clock/amlogic,a1-peripherals-clkc.yaml | 73 +++++++++++ .../bindings/clock/amlogic,a1-pll-clkc.yaml | 5 +- .../clock/amlogic,a1-peripherals-clkc.h | 115 ++++++++++++++++++ 3 files changed, 191 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml create mode 100644 include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml new file mode 100644 index 000000000000..6d84cee1bd75 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 Peripherals Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-peripherals-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div3 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input oscillator (usually at 24MHz) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml index 5c6fa620a63c..a59b188a8bf5 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -43,6 +43,7 @@ additionalProperties: false examples: - | + #include apb { #address-cells = <2>; #size-cells = <2>; @@ -51,8 +52,8 @@ examples: compatible = "amlogic,a1-pll-clkc"; reg = <0 0x7c80 0 0x18c>; #clock-cells = <1>; - clocks = <&clkc_periphs_fixpll_in>, - <&clkc_periphs_hifipll_in>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; clock-names = "fixpll_in", "hifipll_in"; }; }; diff --git a/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h new file mode 100644 index 000000000000..ff2730f398a6 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PERIPHERALS_CLKC_H +#define __A1_PERIPHERALS_CLKC_H + +#define CLKID_FIXPLL_IN 1 +#define CLKID_USB_PHY_IN 2 +#define CLKID_USB_CTRL_IN 3 +#define CLKID_HIFIPLL_IN 4 +#define CLKID_SYSPLL_IN 5 +#define CLKID_DDS_IN 6 +#define CLKID_SYS 7 +#define CLKID_CLKTREE 8 +#define CLKID_RESET_CTRL 9 +#define CLKID_ANALOG_CTRL 10 +#define CLKID_PWR_CTRL 11 +#define CLKID_PAD_CTRL 12 +#define CLKID_SYS_CTRL 13 +#define CLKID_TEMP_SENSOR 14 +#define CLKID_AM2AXI_DIV 15 +#define CLKID_SPICC_B 16 +#define CLKID_SPICC_A 17 +#define CLKID_MSR 18 +#define CLKID_AUDIO 19 +#define CLKID_JTAG_CTRL 20 +#define CLKID_SARADC_EN 21 +#define CLKID_PWM_EF 22 +#define CLKID_PWM_CD 23 +#define CLKID_PWM_AB 24 +#define CLKID_CEC 25 +#define CLKID_I2C_S 26 +#define CLKID_IR_CTRL 27 +#define CLKID_I2C_M_D 28 +#define CLKID_I2C_M_C 29 +#define CLKID_I2C_M_B 30 +#define CLKID_I2C_M_A 31 +#define CLKID_ACODEC 32 +#define CLKID_OTP 33 +#define CLKID_SD_EMMC_A 34 +#define CLKID_USB_PHY 35 +#define CLKID_USB_CTRL 36 +#define CLKID_SYS_DSPB 37 +#define CLKID_SYS_DSPA 38 +#define CLKID_DMA 39 +#define CLKID_IRQ_CTRL 40 +#define CLKID_NIC 41 +#define CLKID_GIC 42 +#define CLKID_UART_C 43 +#define CLKID_UART_B 44 +#define CLKID_UART_A 45 +#define CLKID_SYS_PSRAM 46 +#define CLKID_RSA 47 +#define CLKID_CORESIGHT 48 +#define CLKID_AM2AXI_VAD 49 +#define CLKID_AUDIO_VAD 50 +#define CLKID_AXI_DMC 51 +#define CLKID_AXI_PSRAM 52 +#define CLKID_RAMB 53 +#define CLKID_RAMA 54 +#define CLKID_AXI_SPIFC 55 +#define CLKID_AXI_NIC 56 +#define CLKID_AXI_DMA 57 +#define CLKID_CPU_CTRL 58 +#define CLKID_ROM 59 +#define CLKID_PROC_I2C 60 +#define CLKID_DSPA_EN 63 +#define CLKID_DSPA_EN_NIC 64 +#define CLKID_DSPB_EN 65 +#define CLKID_DSPB_EN_NIC 66 +#define CLKID_RTC 67 +#define CLKID_CECA_32K 68 +#define CLKID_CECB_32K 69 +#define CLKID_24M 70 +#define CLKID_12M 71 +#define CLKID_FCLK_DIV2_DIVN 72 +#define CLKID_GEN 73 +#define CLKID_SARADC 75 +#define CLKID_PWM_A 76 +#define CLKID_PWM_B 77 +#define CLKID_PWM_C 78 +#define CLKID_PWM_D 79 +#define CLKID_PWM_E 80 +#define CLKID_PWM_F 81 +#define CLKID_SPICC 82 +#define CLKID_TS 83 +#define CLKID_SPIFC 84 +#define CLKID_USB_BUS 85 +#define CLKID_SD_EMMC 86 +#define CLKID_PSRAM 87 +#define CLKID_DMC 88 +#define CLKID_DSPA_A_SEL 95 +#define CLKID_DSPA_B_SEL 98 +#define CLKID_DSPB_A_SEL 101 +#define CLKID_DSPB_B_SEL 104 +#define CLKID_CECB_32K_SEL_PRE 113 +#define CLKID_CECB_32K_SEL 114 +#define CLKID_CECA_32K_SEL_PRE 117 +#define CLKID_CECA_32K_SEL 118 +#define CLKID_GEN_SEL 121 +#define CLKID_PWM_A_SEL 124 +#define CLKID_PWM_B_SEL 126 +#define CLKID_PWM_C_SEL 128 +#define CLKID_PWM_D_SEL 130 +#define CLKID_PWM_E_SEL 132 +#define CLKID_PWM_F_SEL 134 +#define CLKID_SD_EMMC_SEL2 147 + +#endif /* __A1_PERIPHERALS_CLKC_H */ From patchwork Wed May 17 13:33:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 13245031 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 82ADDC7EE22 for ; Wed, 17 May 2023 13:34:10 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=oL34AJMpPsZa8Vde3kpQBqjTxunrqdU8b+ER8AkU/Q8=; b=JYbcrLUVikZTjJ UxsBri91ZS6zAjVnzf33Nm6rO8/LKHtbtQm7fJ008+/BFOOH1UXBnU2ltT08QCKEF0UTwu7OW1TPG Padn/nyx5RRfrWLVQDndYzNYyDQAQTtZv65/14I8MTEmLC+k/AfzrmjkWWe/57gnx+Ow4UV8t6N1O pJd7l57lxWorf23XhsskFtpU0P9KGKJudMpW3jQs9L1iLojIf0DfMtMRQ9tqN3rhdl8QBWscUbWAh wYavVDECIE1vHsm5j3HFWV0oZpTrXTG8hu/D6UZPDQYq3SH8K3/nFGpG75aRshhzcbEdzqN+Cy97N 1Vo49ov3UbzfF+ie5cDA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHl-009zjd-21; Wed, 17 May 2023 13:33:45 +0000 Received: from mx.sberdevices.ru ([45.89.227.171]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pzHHU-009zXZ-0Q; Wed, 17 May 2023 13:33:34 +0000 Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id A263A5FD45; Wed, 17 May 2023 16:33:23 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1684330403; bh=XJ2eNBVdNxjm96wRIQEQh3aOQJmiPNxexP0sLsMCXi4=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=h69/yYwl6bH5asyO8RH4B60GMXksxJTBJa/3+iEA3N7asAc8a1Z0+kE/v/bkSDp/+ 47XdP3HLmeVA1J7R2vXLZConBzkOrPgEV5NCeQ0tdbDYo2aXnlzZW3IkTVuRYzGuaL nzbQhVh/dceWC93aBySocCvRG7Bs/oYDkDFt43R2wv6mUimvn4oqNhL1FUoki3HYHS ChkurHY+HepuhG/ZmqgPhOpXTZd4vcg3prd/iKMhiNDu4RCOxmQ+FAIOj405CZSauF cBjgtMMmkwRRJNFAocVcyrNuP5I3m0CGWByEUCDGz6M0SEaUa77huiO9LGKCUkc/EC FEgvJRzt337QQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 17 May 2023 16:33:23 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v15 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver Date: Wed, 17 May 2023 16:33:09 +0300 Message-ID: <20230517133309.9874-7-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru> References: <20230517133309.9874-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/05/17 11:04:00 #21328336 X-KSMG-AntiVirus-Status: Clean, skipped X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230517_063328_901343_F7A46865 X-CRM114-Status: GOOD ( 23.57 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Introduce Peripherals clock controller for Amlogic A1 SoC family. A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU, and Audio. This patchset adds support for Amlogic A1 Peripherals clock driver and allows to generate clocks for all A1 SoC peripheral IPs. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-peripherals.c | 2273 ++++++++++++++++++++++++++++ drivers/clk/meson/a1-peripherals.h | 113 ++ 4 files changed, 2397 insertions(+) create mode 100644 drivers/clk/meson/a1-peripherals.c create mode 100644 drivers/clk/meson/a1-peripherals.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 693c4cf60f27..8ce846fdbe43 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL device, A1 SoC Family. Say Y if you want A1 PLL clock controller to work. +config COMMON_CLK_A1_PERIPHERALS + tristate "Amlogic A1 SoC Peripherals clock controller support" + depends on ARM64 + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_REGMAP + help + Support for the Peripherals clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 Peripherals clock + controller to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 2f17f475a48f..d5288662881d 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o +obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c new file mode 100644 index 000000000000..5e7a37cbbb88 --- /dev/null +++ b/drivers/clk/meson/a1-peripherals.c @@ -0,0 +1,2273 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1-peripherals.h" +#include "clk-dualdiv.h" +#include "clk-regmap.h" + +static struct clk_regmap xtal_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixpll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixpll_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_phy_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_phy_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_ctrl_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_ctrl_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap hifipll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "hifipll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap syspll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "syspll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap dds_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "dds_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param clk_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap rtc_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_xtal = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_xtal", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = RTC_CTRL, + .mask = 0x3, + .shift = 0, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_xtal.hw, + &rtc_32k_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * All clocks that can be inherited from a more accurate RTC clock are marked + * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain + * situations, we may need to freeze their parent. The parent setup of these + * clocks should be located on the device tree side. + */ +struct clk_regmap rtc = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 }; +static const struct clk_parent_data sys_parents[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap sys_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys", + .ops = &clk_regmap_mux_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a.hw, + &sys_b.hw, + }, + .num_parents = 2, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 }; +static const struct clk_parent_data dsp_ab_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap dspa_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a.hw, + &dspa_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a.hw, + &dspb_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap clk_24m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "24m", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor clk_24m_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "24m_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap clk_12m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12m", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m_div2.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn_pre = { + .data = &(struct clk_regmap_div_data){ + .offset = CLK12_24_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn_pre", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fclk_div2", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_divn_pre.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver, + * the index 4 is the clock measurement source, it's not supported yet + */ +static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 }; +static const struct clk_parent_data gen_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &rtc.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap gen_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = GEN_CLK_CTRL, + .mask = 0xf, + .shift = 12, + .table = gen_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = gen_parent_data, + .num_parents = ARRAY_SIZE(gen_parent_data), + /* + * The GEN clock can be connected to an external pad, so it + * may be set up directly from the device tree. Additionally, + * the GEN clock can be inherited from a more accurate RTC + * clock, so in certain situations, it may be necessary + * to freeze its parent. + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap gen_div = { + .data = &(struct clk_regmap_div_data){ + .offset = GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap gen = { + .data = &(struct clk_regmap_gate_data){ + .offset = GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SAR_ADC_CLK_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &sys.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap saradc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SAR_ADC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SAR_ADC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "saradc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_abcd_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_c_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_c", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_d_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_d", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_ef_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div5", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_e_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_e_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_e = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_e", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_f_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_f", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * spicc clk + * fdiv2 |\ |\ _____ + * ---------| |---DIV--| | | | spicc out + * ---------| | | |-----|GATE |--------- + * ..... |/ | / |_____| + * --------------------|/ + * 24M + */ +static const struct clk_parent_data spicc_spifc_parents[] = { + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, + { .fw_name = "hifi_pll" }, +}; + +static struct clk_regmap spicc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spicc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPICC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spicc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPICC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ts_div = { + .data = &(struct clk_regmap_div_data){ + .offset = TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ts = { + .data = &(struct clk_regmap_gate_data){ + .offset = TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "ts", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ts_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spifc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPIFC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spifc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPIFC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spifc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data usb_bus_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap usb_bus_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = USB_BUSCLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = usb_bus_parents, + .num_parents = ARRAY_SIZE(usb_bus_parents), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus_div = { + .data = &(struct clk_regmap_div_data){ + .offset = USB_BUSCLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus = { + .data = &(struct clk_regmap_gate_data){ + .offset = USB_BUSCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_bus", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = { + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap sd_emmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap sd_emmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &sd_emmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SD_EMMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap psram_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PSRAM_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &psram_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram = { + .data = &(struct clk_regmap_gate_data){ + .offset = PSRAM_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "psram", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap dmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &dmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = DMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "dmc", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECA_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_div.hw, + &ceca_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap ceca_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECB_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_div.hw, + &cecb_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap cecb_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &sys.hw) + +static MESON_GATE(clktree, SYS_CLK_EN0, 0); +static MESON_GATE(reset_ctrl, SYS_CLK_EN0, 1); +static MESON_GATE(analog_ctrl, SYS_CLK_EN0, 2); +static MESON_GATE(pwr_ctrl, SYS_CLK_EN0, 3); +static MESON_GATE(pad_ctrl, SYS_CLK_EN0, 4); +static MESON_GATE(sys_ctrl, SYS_CLK_EN0, 5); +static MESON_GATE(temp_sensor, SYS_CLK_EN0, 6); +static MESON_GATE(am2axi_dev, SYS_CLK_EN0, 7); +static MESON_GATE(spicc_b, SYS_CLK_EN0, 8); +static MESON_GATE(spicc_a, SYS_CLK_EN0, 9); +static MESON_GATE(msr, SYS_CLK_EN0, 10); +static MESON_GATE(audio, SYS_CLK_EN0, 11); +static MESON_GATE(jtag_ctrl, SYS_CLK_EN0, 12); +static MESON_GATE(saradc_en, SYS_CLK_EN0, 13); +static MESON_GATE(pwm_ef, SYS_CLK_EN0, 14); +static MESON_GATE(pwm_cd, SYS_CLK_EN0, 15); +static MESON_GATE(pwm_ab, SYS_CLK_EN0, 16); +static MESON_GATE(cec, SYS_CLK_EN0, 17); +static MESON_GATE(i2c_s, SYS_CLK_EN0, 18); +static MESON_GATE(ir_ctrl, SYS_CLK_EN0, 19); +static MESON_GATE(i2c_m_d, SYS_CLK_EN0, 20); +static MESON_GATE(i2c_m_c, SYS_CLK_EN0, 21); +static MESON_GATE(i2c_m_b, SYS_CLK_EN0, 22); +static MESON_GATE(i2c_m_a, SYS_CLK_EN0, 23); +static MESON_GATE(acodec, SYS_CLK_EN0, 24); +static MESON_GATE(otp, SYS_CLK_EN0, 25); +static MESON_GATE(sd_emmc_a, SYS_CLK_EN0, 26); +static MESON_GATE(usb_phy, SYS_CLK_EN0, 27); +static MESON_GATE(usb_ctrl, SYS_CLK_EN0, 28); +static MESON_GATE(sys_dspb, SYS_CLK_EN0, 29); +static MESON_GATE(sys_dspa, SYS_CLK_EN0, 30); +static MESON_GATE(dma, SYS_CLK_EN0, 31); +static MESON_GATE(irq_ctrl, SYS_CLK_EN1, 0); +static MESON_GATE(nic, SYS_CLK_EN1, 1); +static MESON_GATE(gic, SYS_CLK_EN1, 2); +static MESON_GATE(uart_c, SYS_CLK_EN1, 3); +static MESON_GATE(uart_b, SYS_CLK_EN1, 4); +static MESON_GATE(uart_a, SYS_CLK_EN1, 5); +static MESON_GATE(sys_psram, SYS_CLK_EN1, 6); +static MESON_GATE(rsa, SYS_CLK_EN1, 8); +static MESON_GATE(coresight, SYS_CLK_EN1, 9); +static MESON_GATE(am2axi_vad, AXI_CLK_EN, 0); +static MESON_GATE(audio_vad, AXI_CLK_EN, 1); +static MESON_GATE(axi_dmc, AXI_CLK_EN, 3); +static MESON_GATE(axi_psram, AXI_CLK_EN, 4); +static MESON_GATE(ramb, AXI_CLK_EN, 5); +static MESON_GATE(rama, AXI_CLK_EN, 6); +static MESON_GATE(axi_spifc, AXI_CLK_EN, 7); +static MESON_GATE(axi_nic, AXI_CLK_EN, 8); +static MESON_GATE(axi_dma, AXI_CLK_EN, 9); +static MESON_GATE(cpu_ctrl, AXI_CLK_EN, 10); +static MESON_GATE(rom, AXI_CLK_EN, 11); +static MESON_GATE(prod_i2c, AXI_CLK_EN, 12); + +/* Array of all clocks registered by this provider */ +static struct clk_hw_onecell_data a1_periphs_clks = { + .hws = { + [CLKID_XTAL_IN] = &xtal_in.hw, + [CLKID_FIXPLL_IN] = &fixpll_in.hw, + [CLKID_USB_PHY_IN] = &usb_phy_in.hw, + [CLKID_USB_CTRL_IN] = &usb_ctrl_in.hw, + [CLKID_HIFIPLL_IN] = &hifipll_in.hw, + [CLKID_SYSPLL_IN] = &syspll_in.hw, + [CLKID_DDS_IN] = &dds_in.hw, + [CLKID_SYS] = &sys.hw, + [CLKID_CLKTREE] = &clktree.hw, + [CLKID_RESET_CTRL] = &reset_ctrl.hw, + [CLKID_ANALOG_CTRL] = &analog_ctrl.hw, + [CLKID_PWR_CTRL] = &pwr_ctrl.hw, + [CLKID_PAD_CTRL] = &pad_ctrl.hw, + [CLKID_SYS_CTRL] = &sys_ctrl.hw, + [CLKID_TEMP_SENSOR] = &temp_sensor.hw, + [CLKID_AM2AXI_DIV] = &am2axi_dev.hw, + [CLKID_SPICC_B] = &spicc_b.hw, + [CLKID_SPICC_A] = &spicc_a.hw, + [CLKID_MSR] = &msr.hw, + [CLKID_AUDIO] = &audio.hw, + [CLKID_JTAG_CTRL] = &jtag_ctrl.hw, + [CLKID_SARADC_EN] = &saradc_en.hw, + [CLKID_PWM_EF] = &pwm_ef.hw, + [CLKID_PWM_CD] = &pwm_cd.hw, + [CLKID_PWM_AB] = &pwm_ab.hw, + [CLKID_CEC] = &cec.hw, + [CLKID_I2C_S] = &i2c_s.hw, + [CLKID_IR_CTRL] = &ir_ctrl.hw, + [CLKID_I2C_M_D] = &i2c_m_d.hw, + [CLKID_I2C_M_C] = &i2c_m_c.hw, + [CLKID_I2C_M_B] = &i2c_m_b.hw, + [CLKID_I2C_M_A] = &i2c_m_a.hw, + [CLKID_ACODEC] = &acodec.hw, + [CLKID_OTP] = &otp.hw, + [CLKID_SD_EMMC_A] = &sd_emmc_a.hw, + [CLKID_USB_PHY] = &usb_phy.hw, + [CLKID_USB_CTRL] = &usb_ctrl.hw, + [CLKID_SYS_DSPB] = &sys_dspb.hw, + [CLKID_SYS_DSPA] = &sys_dspa.hw, + [CLKID_DMA] = &dma.hw, + [CLKID_IRQ_CTRL] = &irq_ctrl.hw, + [CLKID_NIC] = &nic.hw, + [CLKID_GIC] = &gic.hw, + [CLKID_UART_C] = &uart_c.hw, + [CLKID_UART_B] = &uart_b.hw, + [CLKID_UART_A] = &uart_a.hw, + [CLKID_SYS_PSRAM] = &sys_psram.hw, + [CLKID_RSA] = &rsa.hw, + [CLKID_CORESIGHT] = &coresight.hw, + [CLKID_AM2AXI_VAD] = &am2axi_vad.hw, + [CLKID_AUDIO_VAD] = &audio_vad.hw, + [CLKID_AXI_DMC] = &axi_dmc.hw, + [CLKID_AXI_PSRAM] = &axi_psram.hw, + [CLKID_RAMB] = &ramb.hw, + [CLKID_RAMA] = &rama.hw, + [CLKID_AXI_SPIFC] = &axi_spifc.hw, + [CLKID_AXI_NIC] = &axi_nic.hw, + [CLKID_AXI_DMA] = &axi_dma.hw, + [CLKID_CPU_CTRL] = &cpu_ctrl.hw, + [CLKID_ROM] = &rom.hw, + [CLKID_PROC_I2C] = &prod_i2c.hw, + [CLKID_DSPA_SEL] = &dspa_sel.hw, + [CLKID_DSPB_SEL] = &dspb_sel.hw, + [CLKID_DSPA_EN] = &dspa_en.hw, + [CLKID_DSPA_EN_NIC] = &dspa_en_nic.hw, + [CLKID_DSPB_EN] = &dspb_en.hw, + [CLKID_DSPB_EN_NIC] = &dspb_en_nic.hw, + [CLKID_RTC] = &rtc.hw, + [CLKID_CECA_32K] = &ceca_32k_out.hw, + [CLKID_CECB_32K] = &cecb_32k_out.hw, + [CLKID_24M] = &clk_24m.hw, + [CLKID_12M] = &clk_12m.hw, + [CLKID_FCLK_DIV2_DIVN] = &fclk_div2_divn.hw, + [CLKID_GEN] = &gen.hw, + [CLKID_SARADC_SEL] = &saradc_sel.hw, + [CLKID_SARADC] = &saradc.hw, + [CLKID_PWM_A] = &pwm_a.hw, + [CLKID_PWM_B] = &pwm_b.hw, + [CLKID_PWM_C] = &pwm_c.hw, + [CLKID_PWM_D] = &pwm_d.hw, + [CLKID_PWM_E] = &pwm_e.hw, + [CLKID_PWM_F] = &pwm_f.hw, + [CLKID_SPICC] = &spicc.hw, + [CLKID_TS] = &ts.hw, + [CLKID_SPIFC] = &spifc.hw, + [CLKID_USB_BUS] = &usb_bus.hw, + [CLKID_SD_EMMC] = &sd_emmc.hw, + [CLKID_PSRAM] = &psram.hw, + [CLKID_DMC] = &dmc.hw, + [CLKID_SYS_A_SEL] = &sys_a_sel.hw, + [CLKID_SYS_A_DIV] = &sys_a_div.hw, + [CLKID_SYS_A] = &sys_a.hw, + [CLKID_SYS_B_SEL] = &sys_b_sel.hw, + [CLKID_SYS_B_DIV] = &sys_b_div.hw, + [CLKID_SYS_B] = &sys_b.hw, + [CLKID_DSPA_A_SEL] = &dspa_a_sel.hw, + [CLKID_DSPA_A_DIV] = &dspa_a_div.hw, + [CLKID_DSPA_A] = &dspa_a.hw, + [CLKID_DSPA_B_SEL] = &dspa_b_sel.hw, + [CLKID_DSPA_B_DIV] = &dspa_b_div.hw, + [CLKID_DSPA_B] = &dspa_b.hw, + [CLKID_DSPB_A_SEL] = &dspb_a_sel.hw, + [CLKID_DSPB_A_DIV] = &dspb_a_div.hw, + [CLKID_DSPB_A] = &dspb_a.hw, + [CLKID_DSPB_B_SEL] = &dspb_b_sel.hw, + [CLKID_DSPB_B_DIV] = &dspb_b_div.hw, + [CLKID_DSPB_B] = &dspb_b.hw, + [CLKID_RTC_32K_IN] = &rtc_32k_in.hw, + [CLKID_RTC_32K_DIV] = &rtc_32k_div.hw, + [CLKID_RTC_32K_XTAL] = &rtc_32k_xtal.hw, + [CLKID_RTC_32K_SEL] = &rtc_32k_sel.hw, + [CLKID_CECB_32K_IN] = &cecb_32k_in.hw, + [CLKID_CECB_32K_DIV] = &cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &cecb_32k_sel.hw, + [CLKID_CECA_32K_IN] = &ceca_32k_in.hw, + [CLKID_CECA_32K_DIV] = &ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &ceca_32k_sel.hw, + [CLKID_DIV2_PRE] = &fclk_div2_divn_pre.hw, + [CLKID_24M_DIV2] = &clk_24m_div2.hw, + [CLKID_GEN_SEL] = &gen_sel.hw, + [CLKID_GEN_DIV] = &gen_div.hw, + [CLKID_SARADC_DIV] = &saradc_div.hw, + [CLKID_PWM_A_SEL] = &pwm_a_sel.hw, + [CLKID_PWM_A_DIV] = &pwm_a_div.hw, + [CLKID_PWM_B_SEL] = &pwm_b_sel.hw, + [CLKID_PWM_B_DIV] = &pwm_b_div.hw, + [CLKID_PWM_C_SEL] = &pwm_c_sel.hw, + [CLKID_PWM_C_DIV] = &pwm_c_div.hw, + [CLKID_PWM_D_SEL] = &pwm_d_sel.hw, + [CLKID_PWM_D_DIV] = &pwm_d_div.hw, + [CLKID_PWM_E_SEL] = &pwm_e_sel.hw, + [CLKID_PWM_E_DIV] = &pwm_e_div.hw, + [CLKID_PWM_F_SEL] = &pwm_f_sel.hw, + [CLKID_PWM_F_DIV] = &pwm_f_div.hw, + [CLKID_SPICC_SEL] = &spicc_sel.hw, + [CLKID_SPICC_DIV] = &spicc_div.hw, + [CLKID_SPICC_SEL2] = &spicc_sel2.hw, + [CLKID_TS_DIV] = &ts_div.hw, + [CLKID_SPIFC_SEL] = &spifc_sel.hw, + [CLKID_SPIFC_DIV] = &spifc_div.hw, + [CLKID_SPIFC_SEL2] = &spifc_sel2.hw, + [CLKID_USB_BUS_SEL] = &usb_bus_sel.hw, + [CLKID_USB_BUS_DIV] = &usb_bus_div.hw, + [CLKID_SD_EMMC_SEL] = &sd_emmc_sel.hw, + [CLKID_SD_EMMC_DIV] = &sd_emmc_div.hw, + [CLKID_SD_EMMC_SEL2] = &sd_emmc_sel2.hw, + [CLKID_PSRAM_SEL] = &psram_sel.hw, + [CLKID_PSRAM_DIV] = &psram_div.hw, + [CLKID_PSRAM_SEL2] = &psram_sel2.hw, + [CLKID_DMC_SEL] = &dmc_sel.hw, + [CLKID_DMC_DIV] = &dmc_div.hw, + [CLKID_DMC_SEL2] = &dmc_sel2.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const a1_periphs_regmaps[] = { + &xtal_in, + &fixpll_in, + &usb_phy_in, + &usb_ctrl_in, + &hifipll_in, + &syspll_in, + &dds_in, + &sys, + &clktree, + &reset_ctrl, + &analog_ctrl, + &pwr_ctrl, + &pad_ctrl, + &sys_ctrl, + &temp_sensor, + &am2axi_dev, + &spicc_b, + &spicc_a, + &msr, + &audio, + &jtag_ctrl, + &saradc_en, + &pwm_ef, + &pwm_cd, + &pwm_ab, + &cec, + &i2c_s, + &ir_ctrl, + &i2c_m_d, + &i2c_m_c, + &i2c_m_b, + &i2c_m_a, + &acodec, + &otp, + &sd_emmc_a, + &usb_phy, + &usb_ctrl, + &sys_dspb, + &sys_dspa, + &dma, + &irq_ctrl, + &nic, + &gic, + &uart_c, + &uart_b, + &uart_a, + &sys_psram, + &rsa, + &coresight, + &am2axi_vad, + &audio_vad, + &axi_dmc, + &axi_psram, + &ramb, + &rama, + &axi_spifc, + &axi_nic, + &axi_dma, + &cpu_ctrl, + &rom, + &prod_i2c, + &dspa_sel, + &dspb_sel, + &dspa_en, + &dspa_en_nic, + &dspb_en, + &dspb_en_nic, + &rtc, + &ceca_32k_out, + &cecb_32k_out, + &clk_24m, + &clk_12m, + &fclk_div2_divn, + &gen, + &saradc_sel, + &saradc, + &pwm_a, + &pwm_b, + &pwm_c, + &pwm_d, + &pwm_e, + &pwm_f, + &spicc, + &ts, + &spifc, + &usb_bus, + &sd_emmc, + &psram, + &dmc, + &sys_a_sel, + &sys_a_div, + &sys_a, + &sys_b_sel, + &sys_b_div, + &sys_b, + &dspa_a_sel, + &dspa_a_div, + &dspa_a, + &dspa_b_sel, + &dspa_b_div, + &dspa_b, + &dspb_a_sel, + &dspb_a_div, + &dspb_a, + &dspb_b_sel, + &dspb_b_div, + &dspb_b, + &rtc_32k_in, + &rtc_32k_div, + &rtc_32k_xtal, + &rtc_32k_sel, + &cecb_32k_in, + &cecb_32k_div, + &cecb_32k_sel_pre, + &cecb_32k_sel, + &ceca_32k_in, + &ceca_32k_div, + &ceca_32k_sel_pre, + &ceca_32k_sel, + &fclk_div2_divn_pre, + &gen_sel, + &gen_div, + &saradc_div, + &pwm_a_sel, + &pwm_a_div, + &pwm_b_sel, + &pwm_b_div, + &pwm_c_sel, + &pwm_c_div, + &pwm_d_sel, + &pwm_d_div, + &pwm_e_sel, + &pwm_e_div, + &pwm_f_sel, + &pwm_f_div, + &spicc_sel, + &spicc_div, + &spicc_sel2, + &ts_div, + &spifc_sel, + &spifc_div, + &spifc_sel2, + &usb_bus_sel, + &usb_bus_div, + &sd_emmc_sel, + &sd_emmc_div, + &sd_emmc_sel2, + &psram_sel, + &psram_div, + &psram_sel2, + &dmc_sel, + &dmc_div, + &dmc_sel2, +}; + +static struct regmap_config a1_periphs_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++) + a1_periphs_regmaps[i]->map = map; + + for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) { + err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]); + if (err) + return dev_err_probe(dev, err, + "clock[%d] registration failed\n", + clkid); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_periphs_clks); +} + +static const struct of_device_id a1_periphs_clkc_match_table[] = { + { .compatible = "amlogic,a1-peripherals-clkc", }, + {} +}; +MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table); + +static struct platform_driver a1_periphs_clkc_driver = { + .probe = meson_a1_periphs_probe, + .driver = { + .name = "a1-peripherals-clkc", + .of_match_table = a1_periphs_clkc_match_table, + }, +}; + +module_platform_driver(a1_periphs_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1-peripherals.h b/drivers/clk/meson/a1-peripherals.h new file mode 100644 index 000000000000..526fc9ba5c9f --- /dev/null +++ b/drivers/clk/meson/a1-peripherals.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic A1 Peripherals Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PERIPHERALS_H +#define __A1_PERIPHERALS_H + +/* peripherals clock controller register offset */ +#define SYS_OSCIN_CTRL 0x0 +#define RTC_BY_OSCIN_CTRL0 0x4 +#define RTC_BY_OSCIN_CTRL1 0x8 +#define RTC_CTRL 0xc +#define SYS_CLK_CTRL0 0x10 +#define SYS_CLK_EN0 0x1c +#define SYS_CLK_EN1 0x20 +#define AXI_CLK_EN 0x24 +#define DSPA_CLK_EN 0x28 +#define DSPB_CLK_EN 0x2c +#define DSPA_CLK_CTRL0 0x30 +#define DSPB_CLK_CTRL0 0x34 +#define CLK12_24_CTRL 0x38 +#define GEN_CLK_CTRL 0x3c +#define SAR_ADC_CLK_CTRL 0xc0 +#define PWM_CLK_AB_CTRL 0xc4 +#define PWM_CLK_CD_CTRL 0xc8 +#define PWM_CLK_EF_CTRL 0xcc +#define SPICC_CLK_CTRL 0xd0 +#define TS_CLK_CTRL 0xd4 +#define SPIFC_CLK_CTRL 0xd8 +#define USB_BUSCLK_CTRL 0xdc +#define SD_EMMC_CLK_CTRL 0xe0 +#define CECA_CLK_CTRL0 0xe4 +#define CECA_CLK_CTRL1 0xe8 +#define CECB_CLK_CTRL0 0xec +#define CECB_CLK_CTRL1 0xf0 +#define PSRAM_CLK_CTRL 0xf4 +#define DMC_CLK_CTRL 0xf8 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +/* + * CLKID index values for internal clocks + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-peripherals-clkc.h. + * Only the clocks ids we don't want to expose, such as the internal muxes and + * dividers of composite clocks, will remain defined here. + */ +#define CLKID_XTAL_IN 0 +#define CLKID_DSPA_SEL 61 +#define CLKID_DSPB_SEL 62 +#define CLKID_SARADC_SEL 74 +#define CLKID_SYS_A_SEL 89 +#define CLKID_SYS_A_DIV 90 +#define CLKID_SYS_A 91 +#define CLKID_SYS_B_SEL 92 +#define CLKID_SYS_B_DIV 93 +#define CLKID_SYS_B 94 +#define CLKID_DSPA_A_DIV 96 +#define CLKID_DSPA_A 97 +#define CLKID_DSPA_B_DIV 99 +#define CLKID_DSPA_B 100 +#define CLKID_DSPB_A_DIV 102 +#define CLKID_DSPB_A 103 +#define CLKID_DSPB_B_DIV 105 +#define CLKID_DSPB_B 106 +#define CLKID_RTC_32K_IN 107 +#define CLKID_RTC_32K_DIV 108 +#define CLKID_RTC_32K_XTAL 109 +#define CLKID_RTC_32K_SEL 110 +#define CLKID_CECB_32K_IN 111 +#define CLKID_CECB_32K_DIV 112 +#define CLKID_CECA_32K_IN 115 +#define CLKID_CECA_32K_DIV 116 +#define CLKID_DIV2_PRE 119 +#define CLKID_24M_DIV2 120 +#define CLKID_GEN_DIV 122 +#define CLKID_SARADC_DIV 123 +#define CLKID_PWM_A_DIV 125 +#define CLKID_PWM_B_DIV 127 +#define CLKID_PWM_C_DIV 129 +#define CLKID_PWM_D_DIV 131 +#define CLKID_PWM_E_DIV 133 +#define CLKID_PWM_F_DIV 135 +#define CLKID_SPICC_SEL 136 +#define CLKID_SPICC_DIV 137 +#define CLKID_SPICC_SEL2 138 +#define CLKID_TS_DIV 139 +#define CLKID_SPIFC_SEL 140 +#define CLKID_SPIFC_DIV 141 +#define CLKID_SPIFC_SEL2 142 +#define CLKID_USB_BUS_SEL 143 +#define CLKID_USB_BUS_DIV 144 +#define CLKID_SD_EMMC_SEL 145 +#define CLKID_SD_EMMC_DIV 146 +#define CLKID_PSRAM_SEL 148 +#define CLKID_PSRAM_DIV 149 +#define CLKID_PSRAM_SEL2 150 +#define CLKID_DMC_SEL 151 +#define CLKID_DMC_DIV 152 +#define CLKID_DMC_SEL2 153 +#define NR_CLKS 154 + +#endif /* __A1_PERIPHERALS_H */