From patchwork Fri Jun 16 15:10:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Waqar Hameed X-Patchwork-Id: 13282874 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B6565EB64D8 for ; Fri, 16 Jun 2023 15:13:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345853AbjFPPNb (ORCPT ); Fri, 16 Jun 2023 11:13:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38542 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345881AbjFPPNa (ORCPT ); Fri, 16 Jun 2023 11:13:30 -0400 Received: from smtp2.axis.com (smtp2.axis.com [195.60.68.18]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C0BD33581; Fri, 16 Jun 2023 08:13:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=axis.com; q=dns/txt; s=axis-central1; t=1686928409; x=1718464409; h=references:from:to:cc:subject:in-reply-to:date: message-id:mime-version; bh=BuJWD6MDEmgPeXDb5794LN9Pv82aJsMiwAk15GVPLck=; b=fEeHnF6roftz+0JFxpjLDFMyAFMGISh+UdGR+xlsPVsOgT/Zuq9ZKSGu 4aKP+FGQCXcN03q1ohT7hx0LbitjAxhvBpqgGd3UpjFc/T/hhRYcjjFpa +GCcK25eyrVAvBk7H4O1VKZC0vNRifARtCPqj4lFgHXeIgBBESZrJtv4h 7Rq/A96xkW71HUFR9c66Cr445384BH+q8LcZ8uqkfVWw+2OIItL11qEHI TT7/mCWXmVJg3tLvgAwPHULVLFjkLLsyAKJUZkKa2heJZtEb3z9zOgQ46 0P1BYLMDFb5H3apdSVoA4ZBIHE2xbNumrkkRWUkyc0c3EDRbbUqpJHtGb g==; References: User-agent: a.out From: Waqar Hameed To: Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , Subject: [PATCH 1/2] dt-bindings: iio: proximity: Add bindings for Murata IRS-D200 In-Reply-To: Date: Fri, 16 Jun 2023 17:10:42 +0200 Message-ID: <9487391b0565434761055b39ba04900bd839580a.1686926857.git.waqarh@axis.com> MIME-Version: 1.0 X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: se-mail01w.axis.com (10.20.40.7) To se-mail01w.axis.com (10.20.40.7) Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Murata IRS-D200 is a PIR sensor for human detection. It uses the I2C bus for communication with interrupt support. Add devicetree bindings requiring the compatible string, I2C slave address (reg) and interrupts. Signed-off-by: Waqar Hameed --- .../iio/proximity/murata,irsd200.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml diff --git a/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml new file mode 100644 index 000000000000..d317fbe7bd50 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata IRS-D200 PIR sensor + +maintainers: + - Waqar Hameed + +description: | + PIR sensor for human detection. + +properties: + compatible: + const: murata,irsd200 + + reg: + items: + - enum: + - 0x48 + - 0x49 + description: | + When the AD pin is connected to GND, the slave address is 0x48. + When the AD pin is connected to VDD, the slave address is 0x49. + + interrupts: + maxItems: 1 + description: + Type should be IRQ_TYPE_EDGE_RISING. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pir@48 { + compatible = "murata,irsd200"; + reg = <0x48>; + interrupts = <24 IRQ_TYPE_EDGE_RISING>; + }; + }; +... From patchwork Fri Jun 16 15:10:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Waqar Hameed X-Patchwork-Id: 13282875 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3DE1AEB64D7 for ; Fri, 16 Jun 2023 15:13:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345881AbjFPPNm (ORCPT ); Fri, 16 Jun 2023 11:13:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38816 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345860AbjFPPNl (ORCPT ); Fri, 16 Jun 2023 11:13:41 -0400 Received: from smtp2.axis.com (smtp2.axis.com [195.60.68.18]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3FA6635A1; Fri, 16 Jun 2023 08:13:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=axis.com; q=dns/txt; s=axis-central1; t=1686928416; x=1718464416; h=references:from:to:cc:subject:in-reply-to:date: message-id:mime-version; bh=lgzh7UoQTjpKUSxBZZs3ucV+NA0ECDDwO2Z0NyJ+DsA=; b=TzAHG/oOqThKpjU2uMVX2pqCv3QBA1eHSOnTSZtKpfmCPYxip/XQITra pUl02VLMu18/+aVmMmG6RLEKhkpc+ZphSYgj/hbhwAVYqve5fqNWwBzyB i4FUHigtJ/uYjHYDGT67zHyJfdW79VT99x2eN4GuVINdBE5D1cge+25Qi yn5ZSBQywbS5J72UDOUYV4yuGsKCqZS1LT+TcfJu1v8oN1kT/PLbEVNvi h9c3t+a11rK4zkIYguxshfZkFtBDrdEK8B61p+eg15F1biCnqgiSU15lK 4/DWEkgC9uBPf3+TrwS4O3Qckq2Ge6Fa+zBI6TC0I+XnWz8CjHJECJPfj w==; References: User-agent: a.out From: Waqar Hameed To: Jonathan Cameron , Lars-Peter Clausen CC: , , Subject: [PATCH 2/2] iio: Add driver for Murata IRS-D200 In-Reply-To: Date: Fri, 16 Jun 2023 17:10:42 +0200 Message-ID: MIME-Version: 1.0 X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: se-mail01w.axis.com (10.20.40.7) To se-mail01w.axis.com (10.20.40.7) Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Murata IRS-D200 is a PIR sensor for human detection. It has support for raw data measurements and detection event notification. Add a driver with support for triggered buffer and events. Map the various settings to the `iio` framework, e.g. threshold values, sampling frequency, filter frequencies etc. Signed-off-by: Waqar Hameed --- drivers/iio/proximity/Kconfig | 12 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/irsd200.c | 1051 +++++++++++++++++++++++++++++++ 3 files changed, 1064 insertions(+) create mode 100644 drivers/iio/proximity/irsd200.c diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index 0e5c17530b8b..2ca3b0bc5eba 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -32,6 +32,18 @@ config CROS_EC_MKBP_PROXIMITY To compile this driver as a module, choose M here: the module will be called cros_ec_mkbp_proximity. +config IRSD200 + tristate "Murata IRS-D200 PIR sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + depends on I2C + help + Say Y here to build a driver for the Murata IRS-D200 PIR sensor. + + To compile this driver as a module, choose M here: the module will be + called irsd200. + config ISL29501 tristate "Intersil ISL29501 Time Of Flight sensor" depends on I2C diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index cc838bb5408a..f36598380446 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -6,6 +6,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AS3935) += as3935.o obj-$(CONFIG_CROS_EC_MKBP_PROXIMITY) += cros_ec_mkbp_proximity.o +obj-$(CONFIG_IRSD200) += irsd200.o obj-$(CONFIG_ISL29501) += isl29501.o obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o obj-$(CONFIG_MB1232) += mb1232.o diff --git a/drivers/iio/proximity/irsd200.c b/drivers/iio/proximity/irsd200.c new file mode 100644 index 000000000000..699801d60295 --- /dev/null +++ b/drivers/iio/proximity/irsd200.c @@ -0,0 +1,1051 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Murata IRS-D200 PIR sensor. + * + * Copyright (C) 2023 Axis Communications AB + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define IRS_DRV_NAME "irsd200" + +/* Registers. */ +#define IRS_REG_OP 0x00 /* Operation mode. */ +#define IRS_REG_DATA_LO 0x02 /* Sensor data LSB. */ +#define IRS_REG_DATA_HI 0x03 /* Sensor data MSB. */ +#define IRS_REG_STATUS 0x04 /* Interrupt status. */ +#define IRS_REG_COUNT 0x05 /* Count of exceeding threshold. */ +#define IRS_REG_DATA_RATE 0x06 /* Output data rate. */ +#define IRS_REG_FILTER 0x07 /* High-pass and low-pass filter. */ +#define IRS_REG_INTR 0x09 /* Interrupt mode. */ +#define IRS_REG_NR_COUNT 0x0a /* Number of counts before interrupt. */ +#define IRS_REG_THR_HI 0x0b /* Upper threshold. */ +#define IRS_REG_THR_LO 0x0c /* Lower threshold. */ +#define IRS_REG_TIMER_LO 0x0d /* Timer setting LSB. */ +#define IRS_REG_TIMER_HI 0x0e /* Timer setting MSB. */ + +/* Interrupt status bits. */ +#define IRS_INTR_DATA 0 /* Data update. */ +#define IRS_INTR_TIMER 1 /* Timer expiration. */ +#define IRS_INTR_COUNT_THR_AND 2 /* Count "AND" threshold. */ +#define IRS_INTR_COUNT_THR_OR 3 /* Count "OR" threshold. */ + +/* + * Quantization scale value for threshold. Used for conversion from/to register + * value. + */ +#define IRS_THR_QUANT_SCALE 128 + +/* + * The upper 4 bits in register IRS_REG_COUNT value is the upper count value + * (exceeding upper threshold value). The lower 4 is the lower count value + * (exceeding lower threshold value). + */ +#define IRS_UPPER_COUNT(count) (count >> 4) +#define IRS_LOWER_COUNT(count) (count & GENMASK(3, 0)) + +/* Index corresponds to the value of IRS_REG_DATA_RATE register. */ +static const int irsd200_data_rates[2] = { + 50, + 100, +}; + +/* Index corresponds to the (field) value of IRS_REG_FILTER register. */ +static const unsigned int irsd200_lp_filter_freq[2] = { + 10, + 7, +}; + +/* + * Index corresponds to the (field) value of IRS_REG_FILTER register. Contains + * only the fractional part (since the integer part is 0, e.g the first value + * corresponds to 0.3 Hz). + */ +static const unsigned int irsd200_hp_filter_freq[2] = { + 3, + 5, +}; + +/* Register fields. */ +enum irsd200_regfield { + /* Data interrupt. */ + IRS_REGF_INTR_DATA, + /* Timer interrupt. */ + IRS_REGF_INTR_TIMER, + /* AND count threshold interrupt. */ + IRS_REGF_INTR_COUNT_THR_AND, + /* OR count threshold interrupt. */ + IRS_REGF_INTR_COUNT_THR_OR, + + /* Low-pass filter frequency. */ + IRS_REGF_LP_FILTER, + /* High-pass filter frequency. */ + IRS_REGF_HP_FILTER, + + /* Sentinel value. */ + IRS_REGF_MAX +}; + +static const struct reg_field irsd200_regfields[] = { + [IRS_REGF_INTR_DATA] = + REG_FIELD(IRS_REG_INTR, IRS_INTR_DATA, IRS_INTR_DATA), + [IRS_REGF_INTR_TIMER] = + REG_FIELD(IRS_REG_INTR, IRS_INTR_TIMER, IRS_INTR_TIMER), + [IRS_REGF_INTR_COUNT_THR_AND] = REG_FIELD( + IRS_REG_INTR, IRS_INTR_COUNT_THR_AND, IRS_INTR_COUNT_THR_AND), + [IRS_REGF_INTR_COUNT_THR_OR] = REG_FIELD( + IRS_REG_INTR, IRS_INTR_COUNT_THR_OR, IRS_INTR_COUNT_THR_OR), + + [IRS_REGF_LP_FILTER] = REG_FIELD(IRS_REG_FILTER, 1, 1), + [IRS_REGF_HP_FILTER] = REG_FIELD(IRS_REG_FILTER, 0, 0), +}; + +static const struct regmap_config irsd200_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = IRS_REG_TIMER_HI, +}; + +struct irsd200_data { + struct regmap *regmap; + struct regmap_field *regfields[IRS_REGF_MAX]; + struct device *dev; +}; + +static int irsd200_setup(struct irsd200_data *data) +{ + unsigned int val; + int ret; + + /* Disable all interrupt sources. */ + ret = regmap_write(data->regmap, IRS_REG_INTR, 0); + if (ret) { + dev_err(data->dev, "Could not set interrupt sources (%d)\n", + ret); + return ret; + } + + /* Set operation to active. */ + ret = regmap_write(data->regmap, IRS_REG_OP, 0x00); + if (ret) { + dev_err(data->dev, "Could not set operation mode (%d)\n", ret); + return ret; + } + + /* Clear threshold count. */ + ret = regmap_read(data->regmap, IRS_REG_COUNT, &val); + if (ret) { + dev_err(data->dev, "Could not clear threshold count (%d)\n", + ret); + return ret; + } + + /* Clear status. */ + ret = regmap_write(data->regmap, IRS_REG_STATUS, 0x0f); + if (ret) { + dev_err(data->dev, "Could not clear status (%d)\n", ret); + return ret; + } + + return 0; +} + +static int irsd200_read_threshold(struct irsd200_data *data, + enum iio_event_direction dir, int *val) +{ + unsigned int regval; + unsigned int reg; + int scale; + int ret; + + /* Set quantization scale. */ + if (dir == IIO_EV_DIR_RISING) { + scale = IRS_THR_QUANT_SCALE; + reg = IRS_REG_THR_HI; + } else if (dir == IIO_EV_DIR_FALLING) { + scale = -IRS_THR_QUANT_SCALE; + reg = IRS_REG_THR_LO; + } else { + return -EINVAL; + } + + ret = regmap_read(data->regmap, reg, ®val); + if (ret < 0) { + dev_err(data->dev, "Could not read threshold (%d)\n", ret); + return ret; + } + + *val = ((int)regval) * scale; + + return 0; +} + +static int irsd200_write_threshold(struct irsd200_data *data, + enum iio_event_direction dir, int val) +{ + unsigned int regval; + unsigned int reg; + int scale; + int ret; + + /* Set quantization scale. */ + if (dir == IIO_EV_DIR_RISING) { + if (val < 0) + return -ERANGE; + + scale = IRS_THR_QUANT_SCALE; + reg = IRS_REG_THR_HI; + } else if (dir == IIO_EV_DIR_FALLING) { + if (val > 0) + return -ERANGE; + + scale = -IRS_THR_QUANT_SCALE; + reg = IRS_REG_THR_LO; + } else { + return -EINVAL; + } + + regval = val / scale; + + if (regval >= BIT(8)) + return -ERANGE; + + ret = regmap_write(data->regmap, reg, regval); + if (ret < 0) { + dev_err(data->dev, "Could not write threshold (%d)\n", ret); + return ret; + } + + return 0; +} + +static int irsd200_read_data(struct irsd200_data *data, s16 *val) +{ + unsigned int tmpval; + int ret; + + ret = regmap_read(data->regmap, IRS_REG_DATA_HI, &tmpval); + if (ret < 0) { + dev_err(data->dev, "Could not read hi data (%d)\n", ret); + return ret; + } + + *val = (s16)(tmpval << 8); + + ret = regmap_read(data->regmap, IRS_REG_DATA_LO, &tmpval); + if (ret < 0) { + dev_err(data->dev, "Could not read lo data (%d)\n", ret); + return ret; + } + + *val |= tmpval; + + return 0; +} + +static int irsd200_read_data_rate(struct irsd200_data *data, int *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, IRS_REG_DATA_RATE, ®val); + if (ret < 0) { + dev_err(data->dev, "Could not read data rate (%d)\n", ret); + return ret; + } + + if (regval >= ARRAY_SIZE(irsd200_data_rates)) + return -ERANGE; + + *val = irsd200_data_rates[regval]; + + return 0; +} + +static int irsd200_write_data_rate(struct irsd200_data *data, int val) +{ + size_t idx; + int ret; + + for (idx = 0; idx < ARRAY_SIZE(irsd200_data_rates); ++idx) { + if (irsd200_data_rates[idx] == val) + break; + } + + if (idx == ARRAY_SIZE(irsd200_data_rates)) + return -ERANGE; + + ret = regmap_write(data->regmap, IRS_REG_DATA_RATE, idx); + if (ret < 0) { + dev_err(data->dev, "Could not write data rate (%d)\n", ret); + return ret; + } + + /* Data sheet says the device needs 3 seconds of settling time. */ + ssleep(3); + + return 0; +} + +static int irsd200_read_timer(struct irsd200_data *data, int *val, int *val2) +{ + unsigned int tmpval; + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, IRS_REG_TIMER_HI, &tmpval); + if (ret < 0) { + dev_err(data->dev, "Could not read hi timer (%d)\n", ret); + return ret; + } + + /* Value is 10 bits. IRS_REG_TIMER_HI is the two MSBs. */ + regval = tmpval << 8; + + ret = regmap_read(data->regmap, IRS_REG_TIMER_LO, &tmpval); + if (ret < 0) { + dev_err(data->dev, "Could not read lo timer (%d)\n", ret); + return ret; + } + + regval |= tmpval; + + ret = irsd200_read_data_rate(data, val2); + if (ret < 0) + return ret; + + *val = regval; + + return 0; +} + +static int irsd200_write_timer(struct irsd200_data *data, int val, int val2) +{ + unsigned int regval; + int data_rate; + int ret; + + if (val < 0 || val2 < 0) + return -ERANGE; + + ret = irsd200_read_data_rate(data, &data_rate); + if (ret < 0) + return ret; + + /* Quantize from seconds. */ + regval = val * data_rate + (val2 * data_rate) / 1000000; + + /* Value is 10 bits. */ + if (regval >= BIT(10)) + return -ERANGE; + + /* IRS_REG_TIMER_HI is the 2 MSBs. */ + ret = regmap_write(data->regmap, IRS_REG_TIMER_HI, regval >> 8); + if (ret < 0) { + dev_err(data->dev, "Could not write hi timer (%d)\n", ret); + return ret; + } + + /* + * IRS_REG_TIMER_LO is the 8 LSBs. Since regmap_config is setup with + * val_bits = 8, we don't have to mask the lower bits in regval when + * writing. + */ + ret = regmap_write(data->regmap, IRS_REG_TIMER_LO, regval); + if (ret < 0) { + dev_err(data->dev, "Could not write lo timer (%d)\n", ret); + return ret; + } + + return 0; +} + +static int irsd200_read_nr_count(struct irsd200_data *data, int *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, IRS_REG_NR_COUNT, ®val); + if (ret < 0) { + dev_err(data->dev, "Could not read nr count (%d)\n", ret); + return ret; + } + + *val = regval; + + return 0; +} + +static int irsd200_write_nr_count(struct irsd200_data *data, int val) +{ + unsigned int regval; + int ret; + + /* A value of zero means that IRS_REG_STATUS is never set. */ + if (val <= 0 || val >= BIT(3)) + return -ERANGE; + + regval = val; + + if (regval >= 2) { + /* + * According to the data sheet, timer must be also set in this + * case (i.e. be non-zero). Check and enforce that. + */ + ret = irsd200_read_timer(data, &val, &val); + if (ret < 0) + return ret; + + if (val == 0) { + dev_err(data->dev, + "Timer must be non-zero when nr count is %u\n", + regval); + return -EPERM; + } + } + + ret = regmap_write(data->regmap, IRS_REG_NR_COUNT, regval); + if (ret < 0) { + dev_err(data->dev, "Could not write nr count (%d)\n", ret); + return ret; + } + + return 0; +} + +static int irsd200_read_lp_filter(struct irsd200_data *data, int *val) +{ + unsigned int regval; + int ret; + + ret = regmap_field_read(data->regfields[IRS_REGF_LP_FILTER], ®val); + if (ret < 0) { + dev_err(data->dev, "Could not read lp filter frequency (%d)\n", + ret); + return ret; + } + + *val = irsd200_lp_filter_freq[regval]; + + return 0; +} + +static int irsd200_write_lp_filter(struct irsd200_data *data, int val) +{ + size_t idx; + int ret; + + for (idx = 0; idx < ARRAY_SIZE(irsd200_lp_filter_freq); ++idx) { + if (irsd200_lp_filter_freq[idx] == val) + break; + } + + if (idx == ARRAY_SIZE(irsd200_lp_filter_freq)) + return -ERANGE; + + ret = regmap_field_write(data->regfields[IRS_REGF_LP_FILTER], idx); + if (ret < 0) { + dev_err(data->dev, "Could not write lp filter frequency (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int irsd200_read_hp_filter(struct irsd200_data *data, int *val, + int *val2) +{ + unsigned int regval; + int ret; + + ret = regmap_field_read(data->regfields[IRS_REGF_HP_FILTER], ®val); + if (ret < 0) { + dev_err(data->dev, "Could not read hp filter frequency (%d)\n", + ret); + return ret; + } + + *val = irsd200_hp_filter_freq[regval]; + *val2 = 10; + + return 0; +} + +static int irsd200_write_hp_filter(struct irsd200_data *data, int val, int val2) +{ + size_t idx; + int ret; + + /* Truncate fractional part to one digit. */ + val2 /= 100000; + + for (idx = 0; idx < ARRAY_SIZE(irsd200_hp_filter_freq); ++idx) { + if (irsd200_hp_filter_freq[idx] == val2) + break; + } + + if (idx == ARRAY_SIZE(irsd200_hp_filter_freq) || val != 0) + return -ERANGE; + + ret = regmap_field_write(data->regfields[IRS_REGF_HP_FILTER], idx); + if (ret < 0) { + dev_err(data->dev, "Could not write hp filter frequency (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int irsd200_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct irsd200_data *data = iio_priv(indio_dev); + int ret; + s16 buf; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = irsd200_read_data(data, &buf); + if (ret < 0) + return ret; + + *val = buf; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = irsd200_read_data_rate(data, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int irsd200_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = irsd200_data_rates; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(irsd200_data_rates); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int irsd200_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct irsd200_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = irsd200_write_data_rate(data, val); + return ret; + default: + return -EINVAL; + } +} + +static int irsd200_read_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int *val, int *val2) +{ + struct irsd200_data *data = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_EV_INFO_VALUE: + ret = irsd200_read_threshold(data, dir, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + case IIO_EV_INFO_TIMEOUT: + ret = irsd200_read_timer(data, val, val2); + if (ret < 0) + return ret; + + return IIO_VAL_FRACTIONAL; + case IIO_EV_INFO_PERIOD: + ret = irsd200_read_nr_count(data, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + case IIO_EV_INFO_LOW_PASS_FILTER_3DB: + ret = irsd200_read_lp_filter(data, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: + ret = irsd200_read_hp_filter(data, val, val2); + if (ret < 0) + return ret; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static int irsd200_write_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int val, int val2) +{ + struct irsd200_data *data = iio_priv(indio_dev); + + switch (info) { + case IIO_EV_INFO_VALUE: + return irsd200_write_threshold(data, dir, val); + case IIO_EV_INFO_TIMEOUT: + return irsd200_write_timer(data, val, val2); + case IIO_EV_INFO_PERIOD: + return irsd200_write_nr_count(data, val); + case IIO_EV_INFO_LOW_PASS_FILTER_3DB: + return irsd200_write_lp_filter(data, val); + case IIO_EV_INFO_HIGH_PASS_FILTER_3DB: + return irsd200_write_hp_filter(data, val, val2); + default: + return -EINVAL; + } +} + +static int irsd200_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct irsd200_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + switch (type) { + case IIO_EV_TYPE_THRESH: + if (dir != IIO_EV_DIR_RISING && dir != IIO_EV_DIR_FALLING) + return -EINVAL; + + ret = regmap_field_read( + data->regfields[IRS_REGF_INTR_COUNT_THR_OR], &val); + if (ret < 0) + return ret; + + return val; + case IIO_EV_TYPE_CHANGE: + ret = regmap_field_read( + data->regfields[IRS_REGF_INTR_TIMER], &val); + if (ret < 0) + return ret; + + return val; + default: + return -EINVAL; + } +} + +static int irsd200_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, int state) +{ + struct irsd200_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + switch (type) { + case IIO_EV_TYPE_THRESH: + /* + * There is no way to tell the hardware to only signal for a + * single direction. Let's just group IIO_EV_DIR_RISING and + * IIO_EV_DIR_FALLING together instead of doing extra + * (unnecessary) post-processing after an interrupt. + */ + + /* Clear the count register (by reading from it). */ + ret = regmap_read(data->regmap, IRS_REG_COUNT, &val); + if (ret < 0) + return ret; + + val = !!state; + ret = regmap_field_write( + data->regfields[IRS_REGF_INTR_COUNT_THR_OR], val); + if (ret < 0) + return ret; + + return val; + case IIO_EV_TYPE_CHANGE: + val = !!state; + ret = regmap_field_write(data->regfields[IRS_REGF_INTR_TIMER], + val); + if (ret < 0) + return ret; + + return val; + default: + return -EINVAL; + } +} + +static irqreturn_t irsd200_irq_thread(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct irsd200_data *data = iio_priv(indio_dev); + enum iio_event_direction dir; + unsigned int lower_count; + unsigned int upper_count; + unsigned int status = 0; + unsigned int source = 0; + unsigned int clear = 0; + unsigned int count = 0; + int ret; + + ret = regmap_read(data->regmap, IRS_REG_INTR, &source); + if (ret) { + dev_err(data->dev, "Could not read interrupt source (%d)\n", + ret); + return IRQ_NONE; + } + + ret = regmap_read(data->regmap, IRS_REG_STATUS, &status); + if (ret) { + dev_err(data->dev, "Could not acknowledge interrupt (%d)\n", + ret); + return IRQ_NONE; + } + + if (status & BIT(IRS_INTR_DATA) && iio_buffer_enabled(indio_dev)) { + iio_trigger_poll_nested(indio_dev->trig); + clear |= BIT(IRS_INTR_DATA); + } + + if (status & BIT(IRS_INTR_TIMER) && source & BIT(IRS_INTR_TIMER)) { + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0, + IIO_EV_TYPE_CHANGE, + IIO_EV_DIR_NONE), + iio_get_time_ns(indio_dev)); + clear |= BIT(IRS_INTR_TIMER); + } + + if (status & BIT(IRS_INTR_COUNT_THR_OR) && + source & BIT(IRS_INTR_COUNT_THR_OR)) { + /* + * The register value resets to zero after reading. We therefore + * need to read once and manually extract the lower and upper + * count register fields. + */ + ret = regmap_read(data->regmap, IRS_REG_COUNT, &count); + if (ret) + dev_err(data->dev, "Could not read count (%d)\n", ret); + + upper_count = IRS_UPPER_COUNT(count); + lower_count = IRS_LOWER_COUNT(count); + + /* + * We only check the OR mode to be able to push events for + * rising and falling thresholds. AND mode is covered when both + * upper and lower count is non-zero, and is signaled with + * IIO_EV_DIR_EITHER. + */ + if (upper_count && !lower_count) + dir = IIO_EV_DIR_RISING; + else if (!upper_count && lower_count) + dir = IIO_EV_DIR_FALLING; + else + dir = IIO_EV_DIR_EITHER; + + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0, + IIO_EV_TYPE_THRESH, dir), + iio_get_time_ns(indio_dev)); + + /* + * The OR mode will always trigger when the AND mode does, but + * not vice versa. However, it seems like the AND bit needs to + * be cleared if data capture _and_ threshold count interrupts + * are desirable, even though it hasn't explicitly been selected + * (with IRS_REG_INTR). Either way, it doesn't hurt... + */ + clear |= BIT(IRS_INTR_COUNT_THR_OR) | + BIT(IRS_INTR_COUNT_THR_AND); + } + + if (clear) { + ret = regmap_write(data->regmap, IRS_REG_STATUS, clear); + if (ret) + dev_err(data->dev, + "Could not clear interrupt status (%d)\n", ret); + } + + return IRQ_HANDLED; +} + +static irqreturn_t irsd200_trigger_handler(int irq, void *pollf) +{ + struct iio_dev *indio_dev = ((struct iio_poll_func *)pollf)->indio_dev; + struct irsd200_data *data = iio_priv(indio_dev); + s16 buf = 0; + int ret; + + ret = irsd200_read_data(data, &buf); + if (ret) + goto end; + + iio_push_to_buffers_with_timestamp(indio_dev, &buf, + iio_get_time_ns(indio_dev)); + +end: + iio_trigger_notify_done(indio_dev->trig); + + return ret ? IRQ_NONE : IRQ_HANDLED; +} + +static int irsd200_buf_postenable(struct iio_dev *indio_dev) +{ + struct irsd200_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_field_write(data->regfields[IRS_REGF_INTR_DATA], 1); + if (ret) { + dev_err(data->dev, + "Could not enable data interrupt source (%d)\n", ret); + } + + return ret; +} + +static int irsd200_buf_predisable(struct iio_dev *indio_dev) +{ + struct irsd200_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_field_write(data->regfields[IRS_REGF_INTR_DATA], 0); + if (ret) { + dev_err(data->dev, + "Could not disable data interrupt source (%d)\n", ret); + } + + return ret; +} + +static const struct iio_info irsd200_info = { + .read_raw = irsd200_read_raw, + .read_avail = irsd200_read_avail, + .write_raw = irsd200_write_raw, + .read_event_value = irsd200_read_event, + .write_event_value = irsd200_write_event, + .read_event_config = irsd200_read_event_config, + .write_event_config = irsd200_write_event_config, +}; + +static const struct iio_buffer_setup_ops irsd200_buf_ops = { + .postenable = &irsd200_buf_postenable, + .predisable = &irsd200_buf_predisable, +}; + +static const struct iio_trigger_ops irsd200_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static const struct iio_event_spec irsd200_event_spec[] = { + /* Upper threshold value. */ + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = + BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), + }, + /* Lower threshold value. */ + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = + BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), + }, + /* Window time. */ + { + .type = IIO_EV_TYPE_CHANGE, + .dir = IIO_EV_DIR_NONE, + .mask_separate = + BIT(IIO_EV_INFO_TIMEOUT) | BIT(IIO_EV_INFO_ENABLE), + }, + /* Number of counts (exceeding thresholds) before interrupt. */ + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_PERIOD), + }, + /* Low-pass filter frequency. */ + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_LOW_PASS_FILTER_3DB), + }, + /* High-pass filter frequency. */ + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB), + }, +}; + +static const struct iio_chan_spec irsd200_channels[] = { + { + .type = IIO_PROXIMITY, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .event_spec = irsd200_event_spec, + .num_event_specs = ARRAY_SIZE(irsd200_event_spec), + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, +}; + +static int irsd200_probe(struct i2c_client *client) +{ + struct iio_trigger *trigger; + struct irsd200_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + size_t i; + int ret; + + regmap = devm_regmap_init_i2c(client, &irsd200_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Could not initialize regmap\n"); + return PTR_ERR(regmap); + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&client->dev, "Could not allocate iio device\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->regmap = regmap; + data->dev = &client->dev; + i2c_set_clientdata(client, indio_dev); + + for (i = 0; i < IRS_REGF_MAX; ++i) { + data->regfields[i] = devm_regmap_field_alloc( + data->dev, data->regmap, irsd200_regfields[i]); + if (IS_ERR(data->regfields[i])) { + dev_err(data->dev, + "Could not allocate register field %zu\n", i); + return PTR_ERR(data->regfields[i]); + } + } + + ret = irsd200_setup(data); + if (ret) + return ret; + + indio_dev->info = &irsd200_info; + indio_dev->name = IRS_DRV_NAME; + indio_dev->channels = irsd200_channels; + indio_dev->num_channels = ARRAY_SIZE(irsd200_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + if (!client->irq) { + dev_err(&client->dev, "No irq available\n"); + return -ENXIO; + } + + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, + irsd200_trigger_handler, + &irsd200_buf_ops); + if (ret) { + dev_err(&client->dev, + "Could not setup iio triggered buffer (%d)\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, + irsd200_irq_thread, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + NULL, indio_dev); + if (ret) { + return dev_err_probe(&client->dev, ret, + "Could not request irq (%d)\n", ret); + } + + trigger = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!trigger) { + dev_err(&client->dev, "Could not allocate iio trigger\n"); + return -ENOMEM; + } + + trigger->ops = &irsd200_trigger_ops; + iio_trigger_set_drvdata(trigger, indio_dev); + + ret = devm_iio_trigger_register(&client->dev, trigger); + if (ret) { + dev_err(&client->dev, "Could not register iio trigger (%d)\n", + ret); + return ret; + } + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret) { + dev_err(&client->dev, "Could not register iio device (%d)\n", + ret); + return ret; + } + + return 0; +} + +static const struct of_device_id irsd200_of_match[] = { + { + .compatible = "murata,irsd200", + }, + {} +}; +MODULE_DEVICE_TABLE(of, irsd200_of_match); + +static struct i2c_driver irsd200_driver = { + .driver = { + .name = IRS_DRV_NAME, + .of_match_table = irsd200_of_match, + }, + .probe = irsd200_probe, +}; +module_i2c_driver(irsd200_driver); + +MODULE_AUTHOR("Waqar Hameed "); +MODULE_DESCRIPTION("Murata IRS-D200 PIR sensor driver"); +MODULE_LICENSE("GPL");