From patchwork Wed Jun 21 04:36:19 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286638 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0DEB2EB64DC for ; Wed, 21 Jun 2023 04:37:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229448AbjFUEhI (ORCPT ); Wed, 21 Jun 2023 00:37:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52948 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229463AbjFUEhH (ORCPT ); Wed, 21 Jun 2023 00:37:07 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 050101730; Tue, 20 Jun 2023 21:37:06 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L12Pga000578; Wed, 21 Jun 2023 04:36:51 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=3jciOEVv065T/NVJ37mpObqQuDxv2hLUWALI8YdfADI=; b=STTMms1ardLhnAXDHJ0KDT0l8jmYkm6tM6hCPKE+c6tY4tgKkmUPHiX835laa+Fs1ORU 87RufVD97QCyQ/eeshVi0qOOAO2ZAd2lg0VCkbhjcrwpsSyA42yceKKVd7DIx4IYnPXX ygD+anhnI5QH/aZOUo7MJyMc3rWMYXHyqK3xnmIQMXL9Dq4LpVwO8fAybYlGztX+5U1G Hcaz6U7w0nIJF8tqm41rGF9qNuITeGPWZxYPGB9HHnyUNYAjU90+TYWYfxWU7EVtn2UQ UEuDCYjVtnMppmaCUE0BLkqM8Lt0ZGVqxCDVUKO4C4uRf+1yX7N+5J6iVtiUYMzIlkhz vw== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb7sutmgu-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:36:51 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4aoBT002877 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:36:50 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:36:44 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 01/10] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Date: Wed, 21 Jun 2023 10:06:19 +0530 Message-ID: <20230621043628.21485-2-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 0SpkLzJ-ptrIAwlr5UCtcx-3YPvVACpk X-Proofpoint-ORIG-GUID: 0SpkLzJ-ptrIAwlr5UCtcx-3YPvVACpk X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 impostorscore=0 priorityscore=1501 bulkscore=0 phishscore=0 mlxlogscore=810 suspectscore=0 spamscore=0 mlxscore=0 adultscore=0 clxscore=1015 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add the compatible string for SC8280 Multiport USB controller from Qualcomm. There are 4 power event irq interrupts supported by this controller (one for each port of multiport). Added all the 4 as non-optional interrupts for SC8280XP-MP Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM IRQ's related to 4 ports of SC8280XP Teritiary controller. Also added ss phy irq for both SS Ports. Signed-off-by: Krishna Kurapati Reviewed-by: Rob Herring --- .../devicetree/bindings/usb/qcom,dwc3.yaml | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index d84281926f10..fb3988208b27 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -26,6 +26,7 @@ properties: - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp - qcom,sdm660-dwc3 - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 @@ -262,6 +263,7 @@ allOf: contains: enum: - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp then: properties: clocks: @@ -455,6 +457,33 @@ allOf: - const: dm_hs_phy_irq - const: ss_phy_irq + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3-mp + then: + properties: + interrupts: + maxItems: 14 + interrupt-names: + items: + - const: dp1_hs_phy_irq + - const: dm1_hs_phy_irq + - const: dp2_hs_phy_irq + - const: dm2_hs_phy_irq + - const: dp3_hs_phy_irq + - const: dm4_hs_phy_irq + - const: dp4_hs_phy_irq + - const: dm4_hs_phy_irq + - const: ss1_phy_irq + - const: ss2_phy_irq + - const: pwr_event_1 + - const: pwr_event_2 + - const: pwr_event_3 + - const: pwr_event_4 + additionalProperties: false examples: From patchwork Wed Jun 21 04:36:20 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286639 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5D158EB64D7 for ; Wed, 21 Jun 2023 04:37:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229463AbjFUEhM (ORCPT ); Wed, 21 Jun 2023 00:37:12 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52954 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229659AbjFUEhJ (ORCPT ); Wed, 21 Jun 2023 00:37:09 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0641C172C; Tue, 20 Jun 2023 21:37:09 -0700 (PDT) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L3qkcA032305; Wed, 21 Jun 2023 04:36:59 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=Fh5+d4C7ZAoXDQSyB5WYGkDIx3kZ+Enc1mB6Bwu3Gio=; b=IhrPeU19PX8QLIRYmayeBN/w+GONoNJHjsIBHZVZZknAdl7E8gfpZXPvqXlbGCUEJLXj zWg9m9hxerBnVvmqNE72eNiiaLk4fhFR/4ZpdS0eBMP4bqw4gypEQf9swjAZ2Wcy2QD8 hVumamPpWwqnjR6GOChMBqucULC/Tqb0UrRvwO+gjYmbZRr99TCi2K6D8JfbLzHjj8uL iZKssrdz2Mx5FpOSEBYN160s6fduX0ja0QY+lKNtzUaeS+1EbWfD4tz/rzFKrDhzFl52 UWnHmMawzQXwZV65DFWbMMPnoagcKPc97qxU+zNHcwL+ecYbD61KdXtSJV/IZ8Wmzh/J eA== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb3fhtyuy-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:36:58 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4av7Q002931 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:36:57 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:36:51 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati , Bjorn Andersson Subject: [PATCH v9 02/10] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Date: Wed, 21 Jun 2023 10:06:20 +0530 Message-ID: <20230621043628.21485-3-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: VAFkraTsmZOjdm9PYcIremsSj8jd3_6y X-Proofpoint-ORIG-GUID: VAFkraTsmZOjdm9PYcIremsSj8jd3_6y X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 priorityscore=1501 clxscore=1015 impostorscore=0 adultscore=0 suspectscore=0 malwarescore=0 lowpriorityscore=0 phishscore=0 mlxscore=0 mlxlogscore=999 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add bindings to indicate properties required to support multiport on Snps Dwc3 controller. Suggested-by: Bjorn Andersson Signed-off-by: Krishna Kurapati Reviewed-by: Rob Herring --- .../devicetree/bindings/usb/snps,dwc3.yaml | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 4f7625955ccc..dc808f3b4083 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -85,15 +85,16 @@ properties: phys: minItems: 1 - maxItems: 2 + maxItems: 8 phy-names: minItems: 1 - maxItems: 2 - items: - enum: - - usb2-phy - - usb3-phy + maxItems: 8 + oneOf: + - items: + enum: [ usb2-phy, usb3-phy ] + - items: + pattern: "^usb[23]-port[0-3]$" power-domains: description: From patchwork Wed Jun 21 04:36:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286640 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9D89DEB64D8 for ; Wed, 21 Jun 2023 04:37:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229746AbjFUEhU (ORCPT ); Wed, 21 Jun 2023 00:37:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53010 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229659AbjFUEhQ (ORCPT ); Wed, 21 Jun 2023 00:37:16 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3FE5B1982; Tue, 20 Jun 2023 21:37:15 -0700 (PDT) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L483Zq022711; Wed, 21 Jun 2023 04:37:05 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=/0nADFxElOQxvNav4cywOIbvsOuH9Lk3KUVGooFliA4=; b=bXErtr+VM3G1O/3nx7wldYT6uY1s5euuatQu0yXPP639KLIc9uwZmDLzrQd5+Af7Bo/4 p96n4FNfbZIeqgzNyMx7BmaZ1bv4Ab+XWah0//onEHMzgSD9UyLdeINIvnNb0961UpJ0 GwEmqTP8xwwBO8iq1yqIGQzXiCZ84/2r5wWTtAAMTYdd2K465uSSg9PDz70TEagyLIhz nVnFmWr5LudBMZ5Jx4R7SQ8VIj9XRUUUrfuclsx6oxqB98iiN10QJjb9QBFvk5Vm5MSo ZDWgtAVL4SYSGAMkQfn1YdqQ2NVyDMWDE2gqU5KZ694STHFqO5A+yrzRN5sp8xi6dZSg gA== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb3fhtyv9-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:05 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4b4Sq008356 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:04 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:36:58 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 03/10] usb: dwc3: core: Access XHCI address space temporarily to read port info Date: Wed, 21 Jun 2023 10:06:21 +0530 Message-ID: <20230621043628.21485-4-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: wJYZhALTD8FuJhIn-HvI88duhZL6wLP6 X-Proofpoint-ORIG-GUID: wJYZhALTD8FuJhIn-HvI88duhZL6wLP6 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 priorityscore=1501 clxscore=1015 impostorscore=0 adultscore=0 suspectscore=0 malwarescore=0 lowpriorityscore=0 phishscore=0 mlxscore=0 mlxlogscore=999 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports. The intention is as follows: Wherever we need to perform phy operations like: LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS() { phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); } If number of usb2 ports is 3, loop can go from index 0-2 for usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure, if the first 2 ports are SS capable or some other ports like (2 and 3) are SS capable. So instead, num_usb2_ports is used to loop around all phy's (both hs and ss) for performing phy operations. If any usb3_generic_phy turns out to be NULL, phy operation just bails out. num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up phy's as we need to know how many SS capable ports are there for this. Signed-off-by: Krishna Kurapati Acked-by: Thinh Nguyen --- drivers/usb/dwc3/core.c | 62 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 9 ++++++ 2 files changed, 71 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f6689b731718..32ec05fc242b 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -39,6 +39,7 @@ #include "io.h" #include "debug.h" +#include "../host/xhci-ext-caps.h" #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ @@ -1767,6 +1768,52 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; } +static int dwc3_read_port_info(struct dwc3 *dwc) +{ + void __iomem *base; + u8 major_revision; + u32 offset = 0; + int ret = 0; + u32 val; + + /* + * Remap xHCI address space to access XHCI ext cap regs, + * since it is needed to get port info. + */ + base = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (IS_ERR(base)) + return PTR_ERR(base); + + do { + offset = xhci_find_next_ext_cap(base, offset, + XHCI_EXT_CAPS_PROTOCOL); + + if (!offset) + break; + + val = readl(base + offset); + major_revision = XHCI_EXT_PORT_MAJOR(val); + + val = readl(base + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); + } else { + dev_err(dwc->dev, + "Unrecognized port major revision %d\n", + major_revision); + } + } while (1); + + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", + dwc->num_usb2_ports, dwc->num_usb3_ports); + + iounmap(base); + return ret; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1774,6 +1821,7 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem *regs; struct dwc3 *dwc; int ret; + unsigned int hw_mode; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) @@ -1854,6 +1902,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; } + /* + * Currently only DWC3 controllers that are host-only capable + * support Multiport. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_read_port_info(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 8b1295e4dcdd..42fb17aa66fa 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -33,6 +33,10 @@ #include +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + #define DWC3_MSG_MAX 500 /* Global constants */ @@ -1029,6 +1033,8 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @num_usb2_ports: number of USB2 ports. + * @num_usb3_ports: number of USB3 ports. * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface * @ulpi_ready: flag to indicate that ULPI is initialized @@ -1168,6 +1174,9 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + u8 num_usb2_ports; + u8 num_usb3_ports; + bool phys_ready; struct ulpi *ulpi; From patchwork Wed Jun 21 04:36:22 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286641 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CAD1DEB64DC for ; Wed, 21 Jun 2023 04:37:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229659AbjFUEhk (ORCPT ); Wed, 21 Jun 2023 00:37:40 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53366 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229791AbjFUEhf (ORCPT ); Wed, 21 Jun 2023 00:37:35 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8C0B91994; Tue, 20 Jun 2023 21:37:22 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L2oDUM024248; Wed, 21 Jun 2023 04:37:13 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=D6FIyIgMKwSgrq83FPPJUG1q91y6mUgAst2KQA5Z7VM=; b=jNMnCB3HbAKC6NSbSmBfidM4AtXcpAs0v4ijmoO5eu3ETJZ9BNeIF3zfiWD4CjHZ825r MjUU/IGy8psjGgXZ1Q7mOPgXgPgJhFwZCfqlBNId2GI3ypn1rkHHKGQ5H85fKbKtrU2+ NriKQuSujO9RR4NmrCSEzsA3zZE8c0ARbkX3aZj32VJCAV/GUCfyU0aPx9pBQQHq60jK Y8WQePG9lJKiCedGZtd7BA5CZ5wgmuljzHgSm+cHmtZU7RNJ24VnO/5GQDXKl1DlWGLE YYj/S9r6PDIJS2yEw+tfXL6DgRvK7ktZxvxAcML5oDwhawuRJX/SqjyUeoLdswlOkygo 3w== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb7sutmhh-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:12 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bCbv020763 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:12 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:05 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 04/10] usb: dwc3: core: Skip setting event buffers for host only controllers Date: Wed, 21 Jun 2023 10:06:22 +0530 Message-ID: <20230621043628.21485-5-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: wTmodpteoBrzbx3iq7WoNAa9eLT0gEzc X-Proofpoint-ORIG-GUID: wTmodpteoBrzbx3iq7WoNAa9eLT0gEzc X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 impostorscore=0 priorityscore=1501 bulkscore=0 phishscore=0 mlxlogscore=991 suspectscore=0 spamscore=0 mlxscore=0 adultscore=0 clxscore=1015 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org On some SoC's like SA8295P where the tertiary controller is host-only capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible. Trying to access them leads to a crash. For DRD/Peripheral supported controllers, event buffer setup is done again in gadget_pullup. Skip setup or cleanup of event buffers if controller is host-only capable. Suggested-by: Johan Hovold Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 32ec05fc242b..e1ebae54454f 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -486,6 +486,11 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length) { struct dwc3_event_buffer *evt; + unsigned int hw_mode; + + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) + return 0; evt = dwc3_alloc_one_event_buffer(dwc, length); if (IS_ERR(evt)) { @@ -507,6 +512,9 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; + if (!dwc->ev_buf) + return 0; + evt = dwc->ev_buf; evt->lpos = 0; dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), @@ -524,6 +532,9 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; + if (!dwc->ev_buf) + return; + evt = dwc->ev_buf; evt->lpos = 0; From patchwork Wed Jun 21 04:36:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286643 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 88620EB64D8 for ; Wed, 21 Jun 2023 04:38:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229883AbjFUEiG (ORCPT ); Wed, 21 Jun 2023 00:38:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53740 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229898AbjFUEh4 (ORCPT ); Wed, 21 Jun 2023 00:37:56 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A42481BFD; Tue, 20 Jun 2023 21:37:34 -0700 (PDT) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L3mAYx025651; Wed, 21 Jun 2023 04:37:20 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=t+jbT8XsPPqH6RuyB0ggTve3SpJHYU7aulJrP5gVOB4=; b=kCnaNkPMPg8Lj+ZWDTYnkorCXprCezMdBYTLHmgVkl32v63qCUa0zTmB+Xx4dXZ1q7Pf XATGYRyBrGrZYxam8+iW5R/Dwv1StdsFCOhDK73HV5V2Ic3QJph65HqXnYiEbAk9slzf OmkJ8piFxjr4H00mnC4kyFTbs77SnSdtRkqhnfFmmdC2Ym+iUo4GqOm6ER8cqf9evwNy dvyWFbV11lZeXcpkybf8mDpi9K7TFsRRDgR/qqm8GMNx0OyDy/EtPsfAQliSSP9GZmSO CUaP2V7BVR/f1pwasLIdwpFm7n8G/xlOVYdHZO18BsJNJCR0nqGInkH/oH7C4vDuzQ59 rA== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb3fhtyvv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:19 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bJ8H003238 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:19 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:12 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 05/10] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Date: Wed, 21 Jun 2023 10:06:23 +0530 Message-ID: <20230621043628.21485-6-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 32Ls5aMWul2oeNpEbQZ9DupOBusmEybS X-Proofpoint-ORIG-GUID: 32Ls5aMWul2oeNpEbQZ9DupOBusmEybS X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 priorityscore=1501 clxscore=1015 impostorscore=0 adultscore=0 suspectscore=0 malwarescore=0 lowpriorityscore=0 phishscore=0 mlxscore=0 mlxlogscore=968 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Currently the DWC3 driver supports only single port controller which requires at most one HS and one SS PHY. But the DWC3 USB controller can be connected to multiple ports and each port can have their own PHYs. Each port of the multiport controller can either be HS+SS capable or HS only capable Proper quantification of them is required to modify GUSB2PHYCFG and GUSB3PIPECTL registers appropriately. Add support for detecting, obtaining and configuring phy's supported by a multiport controller and limit the max number of ports supported to 4. Signed-off-by: Harsh Agarwal [Krishna: Modifed logic for generic phy and rebased the patch] Signed-off-by: Krishna Kurapati Acked-by: Thinh Nguyen --- drivers/usb/dwc3/core.c | 252 ++++++++++++++++++++++++++++------------ drivers/usb/dwc3/core.h | 11 +- drivers/usb/dwc3/drd.c | 15 ++- 3 files changed, 192 insertions(+), 86 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index e1ebae54454f..2ac72525de7d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -120,10 +120,11 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) static void __dwc3_set_mode(struct work_struct *work) { struct dwc3 *dwc = work_to_dwc(work); + u32 desired_dr_role; unsigned long flags; int ret; u32 reg; - u32 desired_dr_role; + int i; mutex_lock(&dwc->mutex); spin_lock_irqsave(&dwc->lock, flags); @@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work) } else { if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); + } if (dwc->dis_split_quirk) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); reg |= DWC3_GUCTL3_SPLITDISABLE; @@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) @@ -587,22 +590,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) return ret; } -/** - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core - * @dwc: Pointer to our controller context structure - * - * Returns 0 on success. The USB PHY interfaces are configured but not - * initialized. The PHY interfaces and the PHYs get initialized together with - * the core in dwc3_core_init. - */ -static int dwc3_phy_setup(struct dwc3 *dwc) +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) { unsigned int hw_mode; u32 reg; hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index)); /* * Make sure UX_EXIT_PX is cleared as that causes issues with some @@ -657,9 +652,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg); + + return 0; +} + +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) +{ + unsigned int hw_mode; + u32 reg; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index)); /* Select the HS PHY interface */ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { @@ -671,7 +676,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } else if (dwc->hsphy_interface && !strncmp(dwc->hsphy_interface, "ulpi", 4)) { reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); } else { /* Relying on default value. */ if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) @@ -738,7 +743,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->ulpi_ext_vbus_drv) reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); + + return 0; +} + +/** + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success. The USB PHY interfaces are configured but not + * initialized. The PHY interfaces and the PHYs get initialized together with + * the core in dwc3_core_init. + */ +static int dwc3_phy_setup(struct dwc3 *dwc) +{ + int i; + int ret; + + for (i = 0; i < dwc->num_usb3_ports; i++) { + ret = dwc3_ss_phy_setup(dwc, i); + if (ret) + return ret; + } + + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = dwc3_hs_phy_setup(dwc, i); + if (ret) + return ret; + } return 0; } @@ -746,23 +779,34 @@ static int dwc3_phy_setup(struct dwc3 *dwc) static int dwc3_phy_init(struct dwc3 *dwc) { int ret; + int i; + int j; usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - goto err_shutdown_usb3_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_init(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_exit_usb2_phy; + } - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) - goto err_exit_usb2_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_init(dwc->usb3_generic_phy[i]); + if (ret < 0) + goto err_exit_usb3_phy; + } return 0; +err_exit_usb3_phy: + for (j = i-1; j >= 0; j--) + phy_exit(dwc->usb3_generic_phy[j]); + i = dwc->num_usb2_ports; err_exit_usb2_phy: - phy_exit(dwc->usb2_generic_phy); -err_shutdown_usb3_phy: + for (j = i-1; j >= 0; j--) + phy_exit(dwc->usb2_generic_phy[j]); + usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); @@ -771,8 +815,12 @@ static int dwc3_phy_init(struct dwc3 *dwc) static void dwc3_phy_exit(struct dwc3 *dwc) { - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); + int i; + + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_exit(dwc->usb3_generic_phy[i]); + phy_exit(dwc->usb2_generic_phy[i]); + } usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); @@ -781,23 +829,34 @@ static void dwc3_phy_exit(struct dwc3 *dwc) static int dwc3_phy_power_on(struct dwc3 *dwc) { int ret; + int i; + int j; usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); - ret = phy_power_on(dwc->usb2_generic_phy); - if (ret < 0) - goto err_suspend_usb3_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_power_on(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_power_off_usb2_phy; + } - ret = phy_power_on(dwc->usb3_generic_phy); - if (ret < 0) - goto err_power_off_usb2_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_power_on(dwc->usb3_generic_phy[i]); + if (ret < 0) + goto err_power_off_usb3_phy; + } return 0; +err_power_off_usb3_phy: + for (j = i-1; j >= 0; j--) + phy_power_off(dwc->usb3_generic_phy[i]); + i = dwc->num_usb2_ports; err_power_off_usb2_phy: - phy_power_off(dwc->usb2_generic_phy); -err_suspend_usb3_phy: + for (j = i-1; j >= 0; j--) + phy_power_off(dwc->usb2_generic_phy[i]); + usb_phy_set_suspend(dwc->usb3_phy, 1); usb_phy_set_suspend(dwc->usb2_phy, 1); @@ -806,8 +865,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc) static void dwc3_phy_power_off(struct dwc3 *dwc) { - phy_power_off(dwc->usb3_generic_phy); - phy_power_off(dwc->usb2_generic_phy); + int i; + + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_power_off(dwc->usb3_generic_phy[i]); + phy_power_off(dwc->usb2_generic_phy[i]); + } usb_phy_set_suspend(dwc->usb3_phy, 1); usb_phy_set_suspend(dwc->usb2_phy, 1); @@ -1080,6 +1143,7 @@ static int dwc3_core_init(struct dwc3 *dwc) unsigned int hw_mode; u32 reg; int ret; + int i; hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); @@ -1123,15 +1187,19 @@ static int dwc3_core_init(struct dwc3 *dwc) if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { if (!dwc->dis_u3_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + for (i = 0; i < dwc->num_usb3_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)); + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg); + } } if (!dwc->dis_u2_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } } } @@ -1290,7 +1358,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) { struct device *dev = dwc->dev; struct device_node *node = dev->of_node; + char phy_name[11]; int ret; + int i; if (node) { dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); @@ -1316,22 +1386,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) return dev_err_probe(dev, ret, "no usb3 phy configured\n"); } - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); - if (IS_ERR(dwc->usb2_generic_phy)) { - ret = PTR_ERR(dwc->usb2_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) - dwc->usb2_generic_phy = NULL; + for (i = 0; i < dwc->num_usb2_ports; i++) { + if (dwc->num_usb2_ports == 1) + sprintf(phy_name, "usb2-phy"); else - return dev_err_probe(dev, ret, "no usb2 phy configured\n"); - } + sprintf(phy_name, "usb2-port%d", i); + + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb2_generic_phy[i])) { + ret = PTR_ERR(dwc->usb2_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb2_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, + "no %s phy configured\n", phy_name); + } - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); - if (IS_ERR(dwc->usb3_generic_phy)) { - ret = PTR_ERR(dwc->usb3_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) - dwc->usb3_generic_phy = NULL; + if (dwc->num_usb2_ports == 1) + sprintf(phy_name, "usb3-phy"); else - return dev_err_probe(dev, ret, "no usb3 phy configured\n"); + sprintf(phy_name, "usb3-port%d", i); + + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb3_generic_phy[i])) { + ret = PTR_ERR(dwc->usb3_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb3_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, + "no %s phy configured\n", phy_name); + } } return 0; @@ -1341,6 +1425,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) { struct device *dev = dwc->dev; int ret; + int i; switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: @@ -1348,8 +1433,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) @@ -1360,8 +1445,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); + } ret = dwc3_host_init(dwc); if (ret) @@ -1821,6 +1908,9 @@ static int dwc3_read_port_info(struct dwc3 *dwc) dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", dwc->num_usb2_ports, dwc->num_usb3_ports); + if (dwc->num_usb2_ports > DWC3_MAX_PORTS) + ret = -ENOMEM; + iounmap(base); return ret; } @@ -2057,6 +2147,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; u32 reg; + int i; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2075,17 +2166,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) /* Let controller to suspend HSPHY before PHY driver suspends */ if (dwc->dis_u2_susphy_quirk || dwc->dis_enblslpm_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | - DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | + DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } /* Give some time for USB2 PHY to suspend */ usleep_range(5000, 6000); } - phy_pm_runtime_put_sync(dwc->usb2_generic_phy); - phy_pm_runtime_put_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]); + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]); + } break; case DWC3_GCTL_PRTCAP_OTG: /* do nothing during runtime_suspend */ @@ -2115,6 +2210,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) unsigned long flags; int ret; u32 reg; + int i; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2134,17 +2230,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - if (dwc->dis_enblslpm_quirk) - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } - phy_pm_runtime_get_sync(dwc->usb2_generic_phy); - phy_pm_runtime_get_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]); + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]); + } break; case DWC3_GCTL_PRTCAP_OTG: /* nothing to do on runtime_resume */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 42fb17aa66fa..b2bab23ca22b 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -37,6 +37,9 @@ #define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) #define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) +/* Number of ports supported by a multiport controller */ +#define DWC3_MAX_PORTS 4 + #define DWC3_MSG_MAX 500 /* Global constants */ @@ -1031,8 +1034,8 @@ struct dwc3_scratchpad_array { * @usb_psy: pointer to power supply interface. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY - * @usb2_generic_phy: pointer to USB2 PHY - * @usb3_generic_phy: pointer to USB3 PHY + * @usb2_generic_phy: pointer to array of USB2 PHY + * @usb3_generic_phy: pointer to array of USB3 PHY * @num_usb2_ports: number of USB2 ports. * @num_usb3_ports: number of USB3 ports. * @phys_ready: flag to indicate that PHYs are ready @@ -1171,8 +1174,8 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; - struct phy *usb2_generic_phy; - struct phy *usb3_generic_phy; + struct phy *usb2_generic_phy[DWC3_MAX_PORTS]; + struct phy *usb3_generic_phy[DWC3_MAX_PORTS]; u8 num_usb2_ports; u8 num_usb3_ports; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 039bf241769a..18a247ff75ac 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -327,10 +327,11 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc) void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) { + unsigned long flags; int ret; u32 reg; int id; - unsigned long flags; + int i; if (dwc->dr_mode != USB_DR_MODE_OTG) return; @@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) } else { if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - if (dwc->usb2_generic_phy) - phy_set_mode(dwc->usb2_generic_phy, - PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + if (dwc->usb2_generic_phy[i]) + phy_set_mode(dwc->usb2_generic_phy[i], + PHY_MODE_USB_HOST); + } } break; case DWC3_OTG_ROLE_DEVICE: @@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - if (dwc->usb2_generic_phy) - phy_set_mode(dwc->usb2_generic_phy, + if (dwc->usb2_generic_phy[0]) + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) From patchwork Wed Jun 21 04:36:24 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286644 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2051DEB64D7 for ; Wed, 21 Jun 2023 04:38:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229791AbjFUEiL (ORCPT ); Wed, 21 Jun 2023 00:38:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53740 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229887AbjFUEiG (ORCPT ); Wed, 21 Jun 2023 00:38:06 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5132D19B0; Tue, 20 Jun 2023 21:37:46 -0700 (PDT) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L2RTEt012783; Wed, 21 Jun 2023 04:37:27 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=SuTZ0i5LCDP/+sFCgTj/7QgjMLIAsGT0wHWMWcFD/6g=; b=b62JSsoYjuxFBNcb2H+Opn9gzeIYaQAVzffQ4amcdN7AuYmHKx5lPP4QCulORPumYHtQ AlHWBFc1Z3gS8KXmWoDihLf5+j8rVJr1UW3rY7fN7KYiSjhiRHmUFxYNC5YRVseUomOw LiRMeKRFh8VXENQw49/JoXTA9dMy8SWtmNOMM1n90v0Rla4nxCJdvn/caDAfJAJOxHLc M00ZJYgSZ5ey7hwsGji3FNPrn1Z3nyLhr4wFPOPzQvFfGCP1V8Vd89bYCFINM45IwftB 0aVdnEYghxsJUYMjqxr3GqrBvwP+4IPkMX3+3PikkU3AC58EkKJZ+YLPVvJFAwayl5ka zA== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rbqkh097h-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:27 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bQn5008131 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:26 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:19 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 06/10] usb: dwc3: qcom: Add support to read IRQ's related to multiport Date: Wed, 21 Jun 2023 10:06:24 +0530 Message-ID: <20230621043628.21485-7-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: HDkK4911H5kz9TN4EX080gVWQhcpkU3Y X-Proofpoint-GUID: HDkK4911H5kz9TN4EX080gVWQhcpkU3Y X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 malwarescore=0 spamscore=0 mlxscore=0 lowpriorityscore=0 suspectscore=0 mlxlogscore=761 priorityscore=1501 bulkscore=0 clxscore=1015 adultscore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support to read Multiport IRQ's related to quad port controller of SA8295 Device. Signed-off-by: Krishna Kurapati Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/dwc3-qcom.c | 108 +++++++++++++++++++++++++++++------ 1 file changed, 91 insertions(+), 17 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 3de43df6bbe8..3ab48a6925fe 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -74,9 +74,9 @@ struct dwc3_qcom { struct reset_control *resets; int hs_phy_irq; - int dp_hs_phy_irq; - int dm_hs_phy_irq; - int ss_phy_irq; + int dp_hs_phy_irq[4]; + int dm_hs_phy_irq[4]; + int ss_phy_irq[2]; enum usb_device_speed usb2_speed; struct extcon_dev *edev; @@ -375,16 +375,16 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]); } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]); } else { - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]); } - dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq[0]); } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) @@ -401,20 +401,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) */ if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0], IRQ_TYPE_EDGE_FALLING); } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0], IRQ_TYPE_EDGE_FALLING); } else { - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0], IRQ_TYPE_EDGE_RISING); - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0], IRQ_TYPE_EDGE_RISING); } - dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0); + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[0], 0); } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) @@ -535,6 +535,80 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev, return ret; } +static int dwc3_qcom_setup_mp_irq(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + char irq_name[15]; + int irq; + int ret; + int i; + + for (i = 0; i < 4; i++) { + if (qcom->dp_hs_phy_irq[i]) + continue; + + sprintf(irq_name, "dp%d_hs_phy_irq", i+1); + irq = dwc3_qcom_get_irq(pdev, irq_name, -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + irq_name, qcom); + if (ret) { + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret); + return ret; + } + } + + qcom->dp_hs_phy_irq[i] = irq; + } + + for (i = 0; i < 4; i++) { + if (qcom->dm_hs_phy_irq[i]) + continue; + + sprintf(irq_name, "dm%d_hs_phy_irq", i+1); + irq = dwc3_qcom_get_irq(pdev, irq_name, -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + irq_name, qcom); + if (ret) { + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret); + return ret; + } + } + + qcom->dm_hs_phy_irq[i] = irq; + } + + for (i = 0; i < 2; i++) { + if (qcom->ss_phy_irq[i]) + continue; + + sprintf(irq_name, "ss%d_phy_irq", i+1); + irq = dwc3_qcom_get_irq(pdev, irq_name, -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + irq_name, qcom); + if (ret) { + dev_err(qcom->dev, "%s failed: %d\n", irq_name, ret); + return ret; + } + } + + qcom->ss_phy_irq[i] = irq; + } + + return 0; +} + static int dwc3_qcom_setup_irq(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); @@ -570,7 +644,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); return ret; } - qcom->dp_hs_phy_irq = irq; + qcom->dp_hs_phy_irq[0] = irq; } irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", @@ -585,7 +659,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); return ret; } - qcom->dm_hs_phy_irq = irq; + qcom->dm_hs_phy_irq[0] = irq; } irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", @@ -600,10 +674,10 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); return ret; } - qcom->ss_phy_irq = irq; + qcom->ss_phy_irq[0] = irq; } - return 0; + return dwc3_qcom_setup_mp_irq(pdev);; } static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) From patchwork Wed Jun 21 04:36:25 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286645 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 118B2EB64D8 for ; Wed, 21 Jun 2023 04:38:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229985AbjFUEi1 (ORCPT ); Wed, 21 Jun 2023 00:38:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54004 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229888AbjFUEiP (ORCPT ); Wed, 21 Jun 2023 00:38:15 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B0F661BC6; Tue, 20 Jun 2023 21:37:52 -0700 (PDT) Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L4TxTY005049; Wed, 21 Jun 2023 04:37:34 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=Ycq0ulk+eGA+DDCEsY8F2xZM9Op6QappdLItiBImGLs=; b=aIgAN2UMFqcSN7/HyCOlwEfJW4TIP8cyPTCp4Q4wcZ57tDfBMy69QsflKGPyXEfbZ29v CEhbWBl8umuVMzQ4PF9rcbr/biM7wriMFmryeLQo87/97zj0eOf3QR77l/vj2a8m8IdX wY1uUED651Tl4pyBU9nhW3Rd/MMMDisMF9IaI75JD03p4SrgW3VLbtUP4RiPQVbVoD2l +JZcrRCSKMYdI/XpzzQZ8QdLksx7hAomTC3nCuKer+oelo+vkA1FagXWKoefmOWf5r3v +I8nWYbDh9kMyTn2rVCu8MIrY2GDarUBgjHcJwRL3XhYUZL9hQEfXHuqkdF6ik9xJwx3 OA== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb1dtk56e-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:33 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bWHQ007761 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:32 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:26 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 07/10] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper Date: Wed, 21 Jun 2023 10:06:25 +0530 Message-ID: <20230621043628.21485-8-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: L_i49YyFxmLMzUzXZYNj3K0dBRPLgRzB X-Proofpoint-GUID: L_i49YyFxmLMzUzXZYNj3K0dBRPLgRzB X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 malwarescore=0 bulkscore=0 impostorscore=0 lowpriorityscore=0 phishscore=0 adultscore=0 suspectscore=0 mlxscore=0 mlxlogscore=965 clxscore=1015 priorityscore=1501 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org QCOM SoC SA8295P's tertiary quad port controller supports 2 HS+SS ports and 2 HS only ports. Add support for configuring PWR_EVENT_IRQ's for all the ports during suspend/resume. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/dwc3-qcom.c | 48 +++++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 3ab48a6925fe..699485a85233 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -37,7 +37,11 @@ #define PIPE3_PHYSTATUS_SW BIT(3) #define PIPE_UTMI_CLK_DIS BIT(8) -#define PWR_EVNT_IRQ_STAT_REG 0x58 +#define PWR_EVNT_IRQ1_STAT_REG 0x58 +#define PWR_EVNT_IRQ2_STAT_REG 0x1dc +#define PWR_EVNT_IRQ3_STAT_REG 0x228 +#define PWR_EVNT_IRQ4_STAT_REG 0x238 + #define PWR_EVNT_LPM_IN_L2_MASK BIT(4) #define PWR_EVNT_LPM_OUT_L2_MASK BIT(5) @@ -93,6 +97,13 @@ struct dwc3_qcom { struct icc_path *icc_path_apps; }; +static u32 pwr_evnt_irq_stat_reg_offset[4] = { + PWR_EVNT_IRQ1_STAT_REG, + PWR_EVNT_IRQ2_STAT_REG, + PWR_EVNT_IRQ3_STAT_REG, + PWR_EVNT_IRQ4_STAT_REG, +}; + static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -417,17 +428,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[0], 0); } +static u8 dwc3_qcom_get_port_info(struct dwc3_qcom *qcom) +{ + struct dwc3 __maybe_unused *dwc = platform_get_drvdata(qcom->dwc3); + + if (dwc3_qcom_is_host(qcom)) + return dwc->num_usb2_ports; + + /* + * If not in host mode, either dwc was not probed + * or we are in device mode, either case checking for + * only first pwr event irq would suffice. + */ + + return 1; +} + static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) { u32 val; int i, ret; + u8 num_ports; if (qcom->is_suspended) return 0; - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG); - if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) + num_ports = dwc3_qcom_get_port_info(qcom); + for (i = 0; i < num_ports; i++) { + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]); + if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) dev_err(qcom->dev, "HS-PHY not in L2\n"); + } for (i = qcom->num_clocks - 1; i >= 0; i--) clk_disable_unprepare(qcom->clks[i]); @@ -452,12 +483,14 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup) { + int num_ports; int ret; int i; if (!qcom->is_suspended) return 0; + num_ports = dwc3_qcom_get_port_info(qcom); if (dwc3_qcom_is_host(qcom) && wakeup) dwc3_qcom_disable_interrupts(qcom); @@ -474,9 +507,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup) if (ret) dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret); - /* Clear existing events from PHY related to L2 in/out */ - dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, - PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); + for (i = 0; i < num_ports; i++) { + /* Clear existing events from PHY related to L2 in/out */ + dwc3_qcom_setbits(qcom->qscratch_base, + pwr_evnt_irq_stat_reg_offset[i], + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); + } qcom->is_suspended = false; From patchwork Wed Jun 21 04:36:26 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286646 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9E50FEB64D8 for ; Wed, 21 Jun 2023 04:38:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229849AbjFUEij (ORCPT ); Wed, 21 Jun 2023 00:38:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54002 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229829AbjFUEi1 (ORCPT ); Wed, 21 Jun 2023 00:38:27 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 03A311BE7; Tue, 20 Jun 2023 21:38:05 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L4EcY8029397; Wed, 21 Jun 2023 04:37:39 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=VeBeWqSJ2jfK3LRUzlDHhHPNBuAIxCr8ie58n3VA3nY=; b=W9BNNO0PnniYdOwZzvVV11bgalV+TnTpD+xwYR5S9vNWbJRytQzaYOUftBx2wtXS2o8+ z1HCQaFFOONYNpN7hT/DmoULim4UKyeUdn/AM9eUFuMhg0N8Fyj2DPK88kDJmHNKuhVN A66Tp17VmfVTpQAWiAtPD3JEV/Zt5bQazmLKTfcVs5GlCrDQBtZBPy+bFZk1NV8Kzfy+ LkArJwbuA0t7veLOvau383ZiYL/Gp9poU/PWq25PWeAoe6cx0iqUP55UtOoNyQz75RwH EndGhvhvb2L9WMmLClcHayUYL+2ATp7sP/h2MhXz2WRdZOGdhd4lKcZoObGXA25gHe+Y aQ== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb7sutmja-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:39 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bcJn008209 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:38 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:32 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Date: Wed, 21 Jun 2023 10:06:26 +0530 Message-ID: <20230621043628.21485-9-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 3Ud-K4Hu5AJOqnMKg0gxobp57r3kY7zv X-Proofpoint-ORIG-GUID: 3Ud-K4Hu5AJOqnMKg0gxobp57r3kY7zv X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 impostorscore=0 priorityscore=1501 bulkscore=0 phishscore=0 mlxlogscore=999 suspectscore=0 spamscore=0 mlxscore=0 adultscore=0 clxscore=1015 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add USB and DWC3 node for tertiary port of SC8280 along with multiport IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride platforms. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 77 ++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 8fa9fbfe5d00..0dfa350ea3b3 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3013,6 +3013,83 @@ system-cache-controller@9200000 { interrupts = ; }; + usb_2: usb@a4f8800 { + compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>, + <&pdc 126 IRQ_TYPE_EDGE_RISING>, + <&pdc 129 IRQ_TYPE_EDGE_RISING>, + <&pdc 128 IRQ_TYPE_EDGE_RISING>, + <&pdc 131 IRQ_TYPE_EDGE_RISING>, + <&pdc 130 IRQ_TYPE_EDGE_RISING>, + <&pdc 133 IRQ_TYPE_EDGE_RISING>, + <&pdc 132 IRQ_TYPE_EDGE_RISING>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "dp1_hs_phy_irq", "dm1_hs_phy_irq", + "dp2_hs_phy_irq", "dm2_hs_phy_irq", + "dp3_hs_phy_irq", "dm3_hs_phy_irq", + "dp4_hs_phy_irq", "dm4_hs_phy_irq", + "ss1_phy_irq", "ss2_phy_irq", + "pwr_event_1", + "pwr_event_2", + "pwr_event_3", + "pwr_event_4"; + + power-domains = <&gcc USB30_MP_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x800 0x0>; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>, + <&usb_2_hsphy1>, <&usb_2_qmpphy1>, + <&usb_2_hsphy2>, + <&usb_2_hsphy3>; + phy-names = "usb2-port0", "usb3-port0", + "usb2-port1", "usb3-port1", + "usb2-port2", + "usb2-port3"; + }; + }; + usb_0: usb@a6f8800 { compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; From patchwork Wed Jun 21 04:36:27 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286648 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C9863C0015E for ; Wed, 21 Jun 2023 04:39:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229945AbjFUEjP (ORCPT ); Wed, 21 Jun 2023 00:39:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54696 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229709AbjFUEjN (ORCPT ); Wed, 21 Jun 2023 00:39:13 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 56FBA1998; Tue, 20 Jun 2023 21:38:45 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L3vKai026623; Wed, 21 Jun 2023 04:37:45 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=bnRJaA9ULGK9N8NDINIWxgL+9CADAwiQYtpDPUqYkNg=; b=ZvbTDqaU7Qv5N2WBoHiMAsfyvhg5Bl43+Ui68ToTU8wOHjNhbMxc7JqHZFaN30raDMkM KlMYNQFnwJV6PBbYhXmn+Gcg/oFTU5BT+afmWyjxEEAL06Erz+Apb/LsV4oS1HKoDYmr Va0s6/FV5qH3UTVegZfAy6xqvRq+h/5G0hF5Fsm1SINS6B3s9HeT+lEUf8X5WXKxtyKP Vb2xsXw6j8i04iSE9PTBqgu15B/ndyGQPBhGxUVeaurNWnLVhxJKj5d8pwnBzv+WEvaw I9HEvowFExfW0wO492CT1TkbB6KkCM19wpAxS8hQbhg4w1ddFmH0HE5EadEXbsRcHFU8 AA== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb7sutmjc-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:45 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bjYL003858 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:45 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:38 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 09/10] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports Date: Wed, 21 Jun 2023 10:06:27 +0530 Message-ID: <20230621043628.21485-10-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: WNyyr7n1cqMGSlHwUOzy349u_7zCQJ-2 X-Proofpoint-ORIG-GUID: WNyyr7n1cqMGSlHwUOzy349u_7zCQJ-2 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 impostorscore=0 priorityscore=1501 bulkscore=0 phishscore=0 mlxlogscore=799 suspectscore=0 spamscore=0 mlxscore=0 adultscore=0 clxscore=1015 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable tertiary controller for SA8295P (based on SC8280XP). Add pinctrl support for usb ports to provide VBUS to connected peripherals. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 53 ++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index fd253942e5e5..8b24b3c55769 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "sa8540p.dtsi" #include "sa8540p-pmics.dtsi" @@ -584,6 +585,20 @@ &usb_1_qmpphy { status = "okay"; }; +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>, + <&usb3_en_state>, + <&usb4_en_state>, + <&usb5_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l5a>; vdda18-supply = <&vreg_l7g>; @@ -729,3 +744,41 @@ wake-n-pins { }; }; }; + +&pmm8540c_gpios { + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +}; + +&pmm8540e_gpios { + usb3_en_state: usb3-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +}; + +&pmm8540g_gpios { + usb4_en_state: usb4-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; + + usb5_en_state: usb5-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +}; From patchwork Wed Jun 21 04:36:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 13286647 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AB105EB64D8 for ; Wed, 21 Jun 2023 04:39:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229888AbjFUEjO (ORCPT ); Wed, 21 Jun 2023 00:39:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54746 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229944AbjFUEjK (ORCPT ); Wed, 21 Jun 2023 00:39:10 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 61FD9198D; Tue, 20 Jun 2023 21:38:43 -0700 (PDT) Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35L4G6Ij009750; Wed, 21 Jun 2023 04:37:52 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=7eLJ5VGSEKr9ajDV2vpmqHH8rLnmFPgGlnGIZu7ZnSg=; b=Gw3hFBFtG3mPITzlXsU8UzXBAdv3zxW6yvb5GbGZIFC8f+tnjNxC4YFiKPva3/W2m7oz PA3KFUdea2fdOr+aaxe3TPZaBdUI8/4JBf+sCMsGCr5r7lqPTwc5Hv8hwbIR4GmF7T4g W8UZ3c1XQS1oIFHXeZAngE2S7lX58OQDA+A/K57xSL6emjrX3N4BYXhIM25D66jgqSFm AL9av2454UTH6N2CuXCa3+Kb39JSOdywdc/fAsA2c7wP4Su2N4iVDZ07BOOEvg5CHV9r 9gUgSKFJzkRsWaTxxWKiFoS6qiXwgfJylTiguhAqB+dcPVH5Z4BAUwtRT8AmJ9keuHUl uw== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rb3guu04p-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:52 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35L4bpIb003900 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 21 Jun 2023 04:37:51 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 20 Jun 2023 21:37:45 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v9 10/10] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller Date: Wed, 21 Jun 2023 10:06:28 +0530 Message-ID: <20230621043628.21485-11-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230621043628.21485-1-quic_kriskura@quicinc.com> References: <20230621043628.21485-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: Vw8XW0VwCZYndRFdUPPZ7FcTvbIPeiYi X-Proofpoint-GUID: Vw8XW0VwCZYndRFdUPPZ7FcTvbIPeiYi X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-06-21_03,2023-06-16_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 adultscore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 mlxscore=0 mlxlogscore=919 priorityscore=1501 phishscore=0 clxscore=1015 bulkscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306210039 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org There is now support for the multiport USB controller this uses so enable it. The board only has a single port hooked up (despite it being wired up to the multiport IP on the SoC). There's also a USB 2.0 mux hooked up, which by default on boot is selected to mux properly. Grab the gpio controlling that and ensure it stays in the right position so USB 2.0 continues to be routed from the external port to the SoC. Signed-off-by: Andrew Halaney [Krishna: Rebased on top of usb-next] Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..53d47593306e 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -309,6 +309,19 @@ &usb_2_qmpphy0 { status = "okay"; }; +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + phy-names = "usb2-port0", "usb3-port0"; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; +}; + &xo_board_clk { clock-frequency = <38400000>; }; @@ -401,4 +414,13 @@ wake-pins { bias-pull-up; }; }; + + usb2_en_state: usb2-en-state { + /* TS3USB221A USB2.0 mux select */ + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; };