From patchwork Sun Jul 9 21:48:19 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 13306134 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1FC73EB64DD for ; Sun, 9 Jul 2023 21:48:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229662AbjGIVsb (ORCPT ); Sun, 9 Jul 2023 17:48:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35376 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230099AbjGIVsa (ORCPT ); Sun, 9 Jul 2023 17:48:30 -0400 Received: from mail-lj1-x230.google.com (mail-lj1-x230.google.com [IPv6:2a00:1450:4864:20::230]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CCB96123 for ; Sun, 9 Jul 2023 14:48:25 -0700 (PDT) Received: by mail-lj1-x230.google.com with SMTP id 38308e7fff4ca-2b6f9edac8dso56263411fa.3 for ; Sun, 09 Jul 2023 14:48:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1688939304; x=1691531304; h=cc:to:message-id:content-transfer-encoding:mime-version:subject :date:from:from:to:cc:subject:date:message-id:reply-to; bh=SBr3pmqtFJ0mBgHUUMTs1QAvH5gPXD+Zu0MIiua0TDc=; b=Ykfs96UVx4AdWvx6+BrUwdWVZYn6+reTEGJZ3oNUurA7amzeluWpisy57oj5knduxO vxABXSzx2F7nPyz2TBllcF28zaP+dHm8MZX84W+yKla+sXJu/Dvsh7xipikGaLEfrN9c gRbY33gzooKHvPLrhhmBE4pQFSUobt2sti0veOFn2dW/U2vFxj7e/4mJ1thspD45L/Jw Vn8EiNpRIo6VfaQofZkukbmdqE28zJkIbovycBdrqG7LtoeuAmD5MywvG8+BFaQISFxl cd2X8ocvKze6lGy4gQ2SFoDGtTmuwQqEqgo2p1ytju0fS7TKg1GcBS+c5Sb3gWXolZWj e0MA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1688939304; x=1691531304; h=cc:to:message-id:content-transfer-encoding:mime-version:subject :date:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=SBr3pmqtFJ0mBgHUUMTs1QAvH5gPXD+Zu0MIiua0TDc=; b=MICOVl+sORKzUefMMG3qm6hINoS+JIDmyYWfSw9ogwrTODGHUHqgI/UWn9P5GwfMEm ahmNG+eHi7/nTQF0P/l43oTWeutnnJkM4896ijBiXAFSptzy/Sz6ReVqNG6CaOBnNwaF g8XoYmgEObtT3hTaOBVbY9+XpYT6aRvbgu3rjBba5EFQ/C3tLAySfKaVILFvsqeq2Mit JVpSWK3hYPIjSQMN7eMmNXRZCtv8jteE5CJ+u73vwN2nAkYtUsN5bGwBbmEKMExGfkuZ zDENfJHfN9L6i4z23qnoAd4PeagLIiifGvESOG7z10XavQ1LmKhyDGA2ac2CK9A7CSxt Dnrw== X-Gm-Message-State: ABy/qLa03ZLZ/icW8YwLMVMHHbHCfeQ68LInc1IdwnTaULqWbsLO5cQu JdJtJqX/UuZsZepBbsu7MOmSNg== X-Google-Smtp-Source: APBJJlHrDVuZizdmq9QzcXLhbnLwg1wobW1fIyufqm+mVm/Wj/b5W0ljPEVY0LZWy49YNatg0Uu83g== X-Received: by 2002:a05:6512:3707:b0:4fb:8df5:8919 with SMTP id z7-20020a056512370700b004fb8df58919mr7378890lfr.23.1688939303958; Sun, 09 Jul 2023 14:48:23 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id x23-20020ac25dd7000000b004faf6a87d63sm1454243lfq.38.2023.07.09.14.48.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 09 Jul 2023 14:48:23 -0700 (PDT) From: Linus Walleij Date: Sun, 09 Jul 2023 23:48:19 +0200 Subject: [PATCH v5] dt-bindings: MFD: Convert STMPE to YAML schema MIME-Version: 1.0 Message-Id: <20230709-stmpe-dt-bindings-v5-1-34a3d6ee1e57@linaro.org> X-B4-Tracking: v=1; b=H4sIACIrq2QC/4XOzwrCMAwG8FeRnq1sbffPk+8hHrIm3QLaSTuGM vbudjsIIujxS/h+ySwiBaYojrtZBJo48uBTKPY7YXvwHUnGlIXKlM6MKmUcb3eSOMqWPbLvorT aVA1ilYOqReq1EEm2Abzt1+a78ITbdd3fAzl+bDfPl5R7juMQntsLk1qnv65NSmZSubqA3DlnE U5X9hCGwxA6sXKT/kvoRBDYHCtdkqnrL8L8JUwidOkQC41NkzcfxLIsL8v5GSdZAQAA To: Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Maxime Coquelin , Alexandre Torgue , Dmitry Torokhov , Lee Jones , Philippe Schenker , Stefan Agner , Marek Vasut , Steffen Trumtrar Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, Rob Herring , Linus Walleij X-Mailer: b4 0.12.3 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This converts the STMPE MFD device tree bindings to the YAML schema. Reference the existing schema for the ADC, just define the other subnode schemas directly in the MFD schema. Add two examples so we have examples covering both the simple GPIO expander and the more complex with ADC and touchscreen. Some in-tree users do not follow the naming conventions for nodes so these DTS files need to be augmented to use proper node names like "adc", "pwm", "gpio", "keyboard-controller" etc before the bindings take effect on them. Acked-by: Dmitry Torokhov Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- This adds the missing GPIO bindings for the STMPE port expander and converts the existing MFD binding to YAML. I suppose Lee can merge this when he's happy with it. --- Changes in v5: - Rebase on v6.5-rc1 meaning GPIO binding is merged upstream and can be dropped. - Link to v4: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v4-0-36fdd53d9919@linaro.org Changes in v4: - Make the GPIO bindings a conversion: there were some old text bindings for the STMPE GPIO, we now delete them as part of the patch. - I expect Lee or the DT binding tree to pick both patches. - Link to v3: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org Changes in v3: - Update to review feedback - Collected some ack/review tags - Link to v2: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v2-0-2f85a1fffcda@linaro.org Changes in v2: - Split off a separate GPIO binding - Updated the MFD binding according to feedback --- ChangeLog v4->v5: - Rebase on v6.5-rc1 ChangeLog v3->v4: - No changes. ChangeLog v2->v3: - Drop the required pwm properties already required by the template pwm schema. - Add the number of PWM cells as const. ChangeLog v1->v2: - Split off the GPIO bindings to their own schema, as the old bindings didn't even have any GPIO bindings. Put the GPIO schema before this schema so we can use GPIO in the examples. - Drop nodename and pattern as STMPE is not a generic name. - Add maxItems to the resets. - Make wakeup-source just :true, as it is a generic property. - Move unevaluatedProperties for subnodes right before properties as requested. - Name devices "port-expander" in the examples. - Use lowercase hex in line init. --- .../devicetree/bindings/input/stmpe-keypad.txt | 41 --- .../bindings/input/touchscreen/stmpe.txt | 108 -------- .../devicetree/bindings/mfd/st,stmpe.yaml | 297 +++++++++++++++++++++ Documentation/devicetree/bindings/mfd/stmpe.txt | 42 --- 4 files changed, 297 insertions(+), 191 deletions(-) --- base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 change-id: 20230426-stmpe-dt-bindings-c3479dd71a28 Best regards, diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt deleted file mode 100644 index 12bb771d66d4..000000000000 --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt +++ /dev/null @@ -1,41 +0,0 @@ -* STMPE Keypad - -Required properties: - - compatible : "st,stmpe-keypad" - - linux,keymap : See ./matrix-keymap.txt - -Optional properties: - - debounce-interval : Debouncing interval time in milliseconds - - st,scan-count : Scanning cycles elapsed before key data is updated - - st,no-autorepeat : If specified device will not autorepeat - - keypad,num-rows : See ./matrix-keymap.txt - - keypad,num-columns : See ./matrix-keymap.txt - -Example: - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt deleted file mode 100644 index 238b51555c04..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ /dev/null @@ -1,108 +0,0 @@ -STMPE Touchscreen ----------------- - -Required properties: - - compatible: "st,stmpe-ts" - -Optional properties: -- st,ave-ctrl : Sample average control - 0 -> 1 sample - 1 -> 2 samples - 2 -> 4 samples - 3 -> 8 samples -- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) - 0 -> 10 us - 1 -> 50 us - 2 -> 100 us - 3 -> 500 us - 4 -> 1 ms - 5 -> 5 ms - 6 -> 10 ms - 7 -> 50 ms -- st,settling : Panel driver settling time (recommended is 2) - 0 -> 10 us - 1 -> 100 us - 2 -> 500 us - 3 -> 1 ms - 4 -> 5 ms - 5 -> 10 ms - 6 -> 50 ms - 7 -> 100 ms -- st,fraction-z : Length of the fractional part in z (recommended is 7) - (fraction-z ([0..7]) = Count of the fractional part) -- st,i-drive : current limit value of the touchscreen drivers - 0 -> 20 mA (typical 35mA max) - 1 -> 50 mA (typical 80 mA max) - -Optional properties common with MFD (deprecated): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 124 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal - 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - -Node should be child node of stmpe node to which it belongs. - -Note that common ADC settings of stmpe_touchscreen (child) will take precedence -over the settings done in MFD. - -Example: - -stmpe811@41 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; - interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; - /* Common ADC settings */ - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - }; - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml new file mode 100644 index 000000000000..b77cc3f3075d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a417193..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - };