From patchwork Wed Nov 15 18:56:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Radhey Shyam Pandey X-Patchwork-Id: 13457231 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=amd.com header.i=@amd.com header.b="mooNw/q9" Received: from NAM11-BN8-obe.outbound.protection.outlook.com (mail-bn8nam11on2040.outbound.protection.outlook.com [40.107.236.40]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9C524BB; Wed, 15 Nov 2023 10:57:18 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=HgJoRJSn/qTaCC9HmMdXks0qs7cyJ842H2Ny6oe40L0JrlIvLJdJxIffG0m2MPRCDfMgSVA/sXRFWeIQPFaIHWyFD3MFksiDfiKHOSju3VbNYSJTqlkZKH3RNQ+a7HVO2ixCudh0OxoN38QxfGZfRG+1nuwvQPsUj7REy3ZGKIq0WXmdY9Q1olZriJCJOud/qZJCUHjT3DgLPmCEUID0olFjH/iFNr4AZJFANlCmjVD/i1qtPiKkbepOLlGjz4wHatDRVi0Nztc9RIRAQtu/Fuh0LQbJuxPQ76YCX0RR6cxzF9pyUkGgJhBCbMI2a/6P2I4rqSB0SLSpOfY0zii3GQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=GCeq9rYC60MvE27UBiXBedCCgAAHf07j36Ar1CRR1Hk=; b=C9lqBa6yQYgDecesu3IPa6rGAHryHdI9qyyKhUiqz44jsUOutH9WyDvXQL1wf9v6Q1cqprSEXbAzy/JbWM5eHrHwDpzRQ9A5X+wjoeFSVKqYx0sGC17vI7XCj3yXmyyeQHoibTehwiY/4/dJg96giVVXGFEHZjMXE8deVGWENQ8d4Xn0iBXH8y90m/mjqBw0egOmOdZ6ZVEKVH5kL0a6IWfM3KHG8PHm0l6eIyN9Q/HyX2qP/R12KDvcfY58PPt1ac4JA8YbKT3Wwji8slQYhj1OS5FZycJu5W+3m7WTVxTHsPKWW2Zx31QB1JX/vAXHs/AcM1rJJTO+QdbhNX/PMg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=davemloft.net smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=GCeq9rYC60MvE27UBiXBedCCgAAHf07j36Ar1CRR1Hk=; b=mooNw/q9UdNwRHbgwLw+aUXitvYQY7DvnQ4EvS6foalhWu1sNyKJ4IemtBE/vyP4LROtHGKEK0kZ3ySOQiNASZ+ERw446UpFzHxLPTmF0BvFa2Ar6+wr1yPYxaBoaPwZmj/Olj1xSBuZKT9oYG1wysPnTo8a+AUTUPtCb2FzFpc= Received: from BL6PEPF00013E03.NAMP222.PROD.OUTLOOK.COM (2603:10b6:22e:400:0:1001:0:1b) by SA1PR12MB6775.namprd12.prod.outlook.com (2603:10b6:806:25a::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7002.20; Wed, 15 Nov 2023 18:57:15 +0000 Received: from MN1PEPF0000F0DE.namprd04.prod.outlook.com (2a01:111:f403:f901::) by BL6PEPF00013E03.outlook.office365.com (2603:1036:903:4::4) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.19 via Frontend Transport; Wed, 15 Nov 2023 18:57:14 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB03.amd.com; pr=C Received: from SATLEXMB03.amd.com (165.204.84.17) by MN1PEPF0000F0DE.mail.protection.outlook.com (10.167.242.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.7002.20 via Frontend Transport; Wed, 15 Nov 2023 18:57:14 +0000 Received: from SATLEXMB08.amd.com (10.181.40.132) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 12:57:13 -0600 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB08.amd.com (10.181.40.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 10:57:13 -0800 Received: from xhdradheys41.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2507.32 via Frontend Transport; Wed, 15 Nov 2023 12:57:09 -0600 From: Radhey Shyam Pandey To: , , , , , , , , , , , CC: , , , Subject: [PATCH net-next v9 1/3] dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support Date: Thu, 16 Nov 2023 00:26:51 +0530 Message-ID: <1700074613-1977070-2-git-send-email-radhey.shyam.pandey@amd.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> References: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: MN1PEPF0000F0DE:EE_|SA1PR12MB6775:EE_ X-MS-Office365-Filtering-Correlation-Id: e8bb6ddf-06e7-462f-4291-08dbe60cae5f X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17;CTRY:US;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:SATLEXMB03.amd.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230031)(4636009)(376002)(39860400002)(396003)(136003)(346002)(230173577357003)(230273577357003)(230922051799003)(1800799009)(82310400011)(64100799003)(186009)(451199024)(40470700004)(46966006)(36840700001)(8936002)(8676002)(7416002)(4326008)(5660300002)(40460700003)(6636002)(110136005)(70206006)(316002)(70586007)(54906003)(921008)(2906002)(36756003)(41300700001)(47076005)(36860700001)(26005)(2616005)(83380400001)(81166007)(40480700001)(336012)(426003)(356005)(82740400003)(86362001)(6666004)(478600001)(36900700001);DIR:OUT;SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Nov 2023 18:57:14.1594 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: e8bb6ddf-06e7-462f-4291-08dbe60cae5f X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB03.amd.com] X-MS-Exchange-CrossTenant-AuthSource: MN1PEPF0000F0DE.namprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SA1PR12MB6775 X-Patchwork-Delegate: kuba@kernel.org Xilinx 1G/2.5G Ethernet Subsystem provides 32-bit AXI4-Stream buses to move transmit and receive Ethernet data to and from the subsystem. These buses are designed to be used with an AXI Direct Memory Access(DMA) IP or AXI Multichannel Direct Memory Access (MCDMA) IP core, AXI4-Stream Data FIFO, or any other custom logic in any supported device. Primary high-speed DMA data movement between system memory and stream target is through the AXI4 Read Master to AXI4 memory-mapped to stream (MM2S) Master, and AXI stream to memory-mapped (S2MM) Slave to AXI4 Write Master. AXI DMA/MCDMA enables channel of data movement on both MM2S and S2MM paths in scatter/gather mode. AXI DMA has two channels where as MCDMA has 16 Tx and 16 Rx channels. To uniquely identify each channel use 'chan' suffix. Depending on the usecase AXI ethernet driver can request any combination of multichannel DMA channels using generic dmas, dma-names properties. Example: dma-names = tx_chan0, rx_chan0, tx_chan1, rx_chan1; Signed-off-by: Radhey Shyam Pandey Reviewed-by: Krzysztof Kozlowski --- Changes for v9: - None Changes for v8: - None Changes for v7: - None Changes for v6: - Added Krzysztof reviewed-by tag. Changes for v5: - Modified commit description to remove dmaengine framework references and instead describe how axiethernet IP uses DMA channels. - Fix "^[tr]x_chan[0-9]|1[0-5]$" -> "^[tr]x_chan([0-9]|1[0-5])$" - Drop generic dmas description. - Use amd.com email address. Changes for v4: - Updated commit description about tx/rx channels name. - Removed "dt-bindings" and "dmaengine" strings in subject. - Extended dmas and dma-names to support MCDMA channel names. - Remove "driver" from commit message. - Use pattern/regex for dma-names property. Changes for v3: - Reverted reg and interrupts property to support backward compatibility. - Moved dmas and dma-names properties from Required properties. Changes for v2: - None. --- .../bindings/net/xlnx,axi-ethernet.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml index 1d33d80af11c..bbe89ea9590c 100644 --- a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -122,6 +122,20 @@ properties: and "phy-handle" should point to an external PHY if exists. maxItems: 1 + dmas: + minItems: 2 + maxItems: 32 + description: TX and RX DMA channel phandle + + dma-names: + items: + pattern: "^[tr]x_chan([0-9]|1[0-5])$" + description: + Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel + Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel + minItems: 2 + maxItems: 32 + required: - compatible - interrupts @@ -143,6 +157,8 @@ examples: clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; phy-mode = "mii"; reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + dmas = <&xilinx_dma 0>, <&xilinx_dma 1>; + dma-names = "tx_chan0", "rx_chan0"; xlnx,rxcsum = <0x2>; xlnx,rxmem = <0x800>; xlnx,txcsum = <0x2>; From patchwork Wed Nov 15 18:56:52 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Radhey Shyam Pandey X-Patchwork-Id: 13457232 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=amd.com header.i=@amd.com header.b="j7l9+w5C" Received: from NAM11-BN8-obe.outbound.protection.outlook.com (mail-bn8nam11on2040.outbound.protection.outlook.com [40.107.236.40]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5882B98; Wed, 15 Nov 2023 10:57:25 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=c+RixhPMEH5/E8f3rgQsQWgygFhf967DHp5AmV/RX8sQa2N0+RmzyTJByTfPimvFhbnBZqSPSVnqy2YT7NlSWRyOq3CiGFIOz4hTvTazlmpp1n+EGz7DlBTlfe/RVUf1/z7uQrNofq9h7r6jYF7dQTSd+TqV02KY6B3cgW3fK9ciF5a0FEwnX0ZClegAQ2jGTIwe6vv8S700s5DnO4ws2jk1/DAVs6os4E9Rtz6dMiBaeprw7UGFshmsNwzkzUuxYcP7MM/+bpfQB8MQrUKC1TzyQnqjMPP5qPq6WHTTfCvK5PoqPoMjDS31cKPyLPtQkStAIt+2m4xnE5RumW/gRQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=HcbRRdxprSVwE+2U8ptxeubeWc/95/tEROJs7itvBEk=; b=eY+WJWiWQclOCCZhaWos1rW3S/Muz6VWJuYjVw7sxPR1aDMnc3i9+cXY8cXyIWg3YwsScLprfVNatkCKI+afspKI3TChbMc5vKmgu5k1IvNQLNWgdJV9d28GGCsx5gX7j9P+mV6qJcDriSpUtJQFcj40wwxJK0WyS6apccD+zh/wIgQPMdr4OzFBLsI6lFSMB5Y4AJsonQSf8gYWz6/djS5tu7F/TMEfo+cr2lLbtYZjz8NxnnQtXh8XIxOIomj47k5LLRpYVrHH6nrhDVnCUUhQ2kkP91cAEpXhFM8RAjAV0Cs+hkhl2ysnC1MTddlLP350JKRnn9twU38J3LP1Aw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=davemloft.net smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=HcbRRdxprSVwE+2U8ptxeubeWc/95/tEROJs7itvBEk=; b=j7l9+w5CDKaLKPtfrt7gfbwhqQWWsYKnzSY5xMDME45wQDMAqH7J02hPMU6n3wRf6sdEADESkNigGWVweGpsqtVepfNQ49PXG2VVlaadv96gC6A5Ulb4oEFgtutXGnNsqE5LFHxXFkcEPrLBYWzcAnaetYgp4gxLK81FEL7dOqM= Received: from MN2PR18CA0004.namprd18.prod.outlook.com (2603:10b6:208:23c::9) by DM4PR12MB5913.namprd12.prod.outlook.com (2603:10b6:8:66::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6977.31; Wed, 15 Nov 2023 18:57:19 +0000 Received: from BL02EPF0001A108.namprd05.prod.outlook.com (2603:10b6:208:23c:cafe::f6) by MN2PR18CA0004.outlook.office365.com (2603:10b6:208:23c::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7002.18 via Frontend Transport; Wed, 15 Nov 2023 18:57:19 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by BL02EPF0001A108.mail.protection.outlook.com (10.167.241.138) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.7002.19 via Frontend Transport; Wed, 15 Nov 2023 18:57:18 +0000 Received: from SATLEXMB08.amd.com (10.181.40.132) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 12:57:18 -0600 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB08.amd.com (10.181.40.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 10:57:17 -0800 Received: from xhdradheys41.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2507.32 via Frontend Transport; Wed, 15 Nov 2023 12:57:13 -0600 From: Radhey Shyam Pandey To: , , , , , , , , , , , CC: , , , , Sarath Babu Naidu Gaddam Subject: [PATCH net-next v9 2/3] net: axienet: Preparatory changes for dmaengine support Date: Thu, 16 Nov 2023 00:26:52 +0530 Message-ID: <1700074613-1977070-3-git-send-email-radhey.shyam.pandey@amd.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> References: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: BL02EPF0001A108:EE_|DM4PR12MB5913:EE_ X-MS-Office365-Filtering-Correlation-Id: 55afe3b0-5b3d-41e3-e19b-08dbe60cb0fd X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17;CTRY:US;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:SATLEXMB04.amd.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230031)(4636009)(376002)(136003)(346002)(396003)(39860400002)(230922051799003)(64100799003)(1800799009)(451199024)(186009)(82310400011)(36840700001)(40470700004)(46966006)(356005)(40480700001)(81166007)(6666004)(83380400001)(36860700001)(47076005)(82740400003)(8936002)(426003)(40460700003)(336012)(2616005)(41300700001)(5660300002)(7416002)(2906002)(30864003)(86362001)(70586007)(8676002)(36756003)(921008)(70206006)(54906003)(316002)(110136005)(4326008)(6636002)(26005)(478600001)(36900700001);DIR:OUT;SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Nov 2023 18:57:18.6012 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 55afe3b0-5b3d-41e3-e19b-08dbe60cb0fd X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: BL02EPF0001A108.namprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM4PR12MB5913 X-Patchwork-Delegate: kuba@kernel.org From: Sarath Babu Naidu Gaddam The axiethernet driver has inbuilt dma programming. In order to add dmaengine support and make it's integration seamless the current axidma inbuilt programming code is put under use_dmaengine check. It also performs minor code reordering to minimize conditional use_dmaengine checks and there is no functional change. It uses "dmas" property to identify whether it should use a dmaengine framework or inbuilt axidma programming. Signed-off-by: Sarath Babu Naidu Gaddam Signed-off-by: Radhey Shyam Pandey --- Changes for v9: - None Changes for v8: - Remove spurious new line and inline attribute from axienet_init_legacy_dma(). - Drop indirection for xmit() func. For dmaengine flow have separate netdev_ops. Changes for v7: - None Changes for v6: - None Changes for v5: - Fix git apply failure due to commit f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9 Changes for v4: - Renamed has_dmas to use_dmaegine. - Removed the AXIENET_USE_DMA. - Changed the start_xmit_** functions description. Changes for v3: - New patch --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 + .../net/ethernet/xilinx/xilinx_axienet_main.c | 284 ++++++++++-------- 2 files changed, 162 insertions(+), 124 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 575ff9de8985..3ead0bac597b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -435,6 +435,7 @@ struct axidma_bd { * @coalesce_usec_rx: IRQ coalesce delay for RX * @coalesce_count_tx: Store the irq coalesce on TX side. * @coalesce_usec_tx: IRQ coalesce delay for TX + * @use_dmaengine: flag to check dmaengine framework usage. */ struct axienet_local { struct net_device *ndev; @@ -499,6 +500,7 @@ struct axienet_local { u32 coalesce_usec_rx; u32 coalesce_count_tx; u32 coalesce_usec_tx; + u8 use_dmaengine; }; /** diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 82d0d44b2b02..188b03e86263 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -589,10 +589,6 @@ static int axienet_device_reset(struct net_device *ndev) struct axienet_local *lp = netdev_priv(ndev); int ret; - ret = __axienet_device_reset(lp); - if (ret) - return ret; - lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; lp->options |= XAE_OPTION_VLAN; lp->options &= (~XAE_OPTION_JUMBO); @@ -606,11 +602,17 @@ static int axienet_device_reset(struct net_device *ndev) lp->options |= XAE_OPTION_JUMBO; } - ret = axienet_dma_bd_init(ndev); - if (ret) { - netdev_err(ndev, "%s: descriptor allocation failed\n", - __func__); - return ret; + if (!lp->use_dmaengine) { + ret = __axienet_device_reset(lp); + if (ret) + return ret; + + ret = axienet_dma_bd_init(ndev); + if (ret) { + netdev_err(ndev, "%s: descriptor allocation failed\n", + __func__); + return ret; + } } axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); @@ -1125,41 +1127,21 @@ static irqreturn_t axienet_eth_irq(int irq, void *_ndev) static void axienet_dma_err_handler(struct work_struct *work); /** - * axienet_open - Driver open routine. - * @ndev: Pointer to net_device structure + * axienet_init_legacy_dma - init the dma legacy code. + * @ndev: Pointer to net_device structure * * Return: 0, on success. - * non-zero error value on failure + * non-zero error value on failure + * + * This is the dma initialization code. It also allocates interrupt + * service routines, enables the interrupt lines and ISR handling. * - * This is the driver open routine. It calls phylink_start to start the - * PHY device. - * It also allocates interrupt service routines, enables the interrupt lines - * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer - * descriptors are initialized. */ -static int axienet_open(struct net_device *ndev) +static int axienet_init_legacy_dma(struct net_device *ndev) { int ret; struct axienet_local *lp = netdev_priv(ndev); - dev_dbg(&ndev->dev, "axienet_open()\n"); - - /* When we do an Axi Ethernet reset, it resets the complete core - * including the MDIO. MDIO must be disabled before resetting. - * Hold MDIO bus lock to avoid MDIO accesses during the reset. - */ - axienet_lock_mii(lp); - ret = axienet_device_reset(ndev); - axienet_unlock_mii(lp); - - ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); - if (ret) { - dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret); - return ret; - } - - phylink_start(lp->phylink); - /* Enable worker thread for Axi DMA error handling */ INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler); @@ -1193,13 +1175,61 @@ static int axienet_open(struct net_device *ndev) err_tx_irq: napi_disable(&lp->napi_tx); napi_disable(&lp->napi_rx); - phylink_stop(lp->phylink); - phylink_disconnect_phy(lp->phylink); cancel_work_sync(&lp->dma_err_task); dev_err(lp->dev, "request_irq() failed\n"); return ret; } +/** + * axienet_open - Driver open routine. + * @ndev: Pointer to net_device structure + * + * Return: 0, on success. + * non-zero error value on failure + * + * This is the driver open routine. It calls phylink_start to start the + * PHY device. + * It also allocates interrupt service routines, enables the interrupt lines + * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer + * descriptors are initialized. + */ +static int axienet_open(struct net_device *ndev) +{ + int ret; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "%s\n", __func__); + + /* When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. MDIO must be disabled before resetting. + * Hold MDIO bus lock to avoid MDIO accesses during the reset. + */ + axienet_lock_mii(lp); + ret = axienet_device_reset(ndev); + axienet_unlock_mii(lp); + + ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); + if (ret) { + dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret); + return ret; + } + + phylink_start(lp->phylink); + + if (!lp->use_dmaengine) { + ret = axienet_init_legacy_dma(ndev); + if (ret) + goto err_phy; + } + + return 0; + +err_phy: + phylink_stop(lp->phylink); + phylink_disconnect_phy(lp->phylink); + return ret; +} + /** * axienet_stop - Driver stop routine. * @ndev: Pointer to net_device structure @@ -1216,8 +1246,10 @@ static int axienet_stop(struct net_device *ndev) dev_dbg(&ndev->dev, "axienet_close()\n"); - napi_disable(&lp->napi_tx); - napi_disable(&lp->napi_rx); + if (!lp->use_dmaengine) { + napi_disable(&lp->napi_tx); + napi_disable(&lp->napi_rx); + } phylink_stop(lp->phylink); phylink_disconnect_phy(lp->phylink); @@ -1225,18 +1257,18 @@ static int axienet_stop(struct net_device *ndev) axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); - axienet_dma_stop(lp); + if (!lp->use_dmaengine) { + axienet_dma_stop(lp); + cancel_work_sync(&lp->dma_err_task); + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + axienet_dma_bd_release(ndev); + } axienet_iow(lp, XAE_IE_OFFSET, 0); - cancel_work_sync(&lp->dma_err_task); - if (lp->eth_irq > 0) free_irq(lp->eth_irq, ndev); - free_irq(lp->tx_irq, ndev); - free_irq(lp->rx_irq, ndev); - - axienet_dma_bd_release(ndev); return 0; } @@ -1412,14 +1444,16 @@ static void axienet_ethtools_get_regs(struct net_device *ndev, data[29] = axienet_ior(lp, XAE_FMI_OFFSET); data[30] = axienet_ior(lp, XAE_AF0_OFFSET); data[31] = axienet_ior(lp, XAE_AF1_OFFSET); - data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); - data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); - data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET); - data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET); - data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); - data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); - data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET); - data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET); + if (!lp->use_dmaengine) { + data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); + data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET); + data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET); + data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); + data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET); + data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET); + } } static void @@ -1880,9 +1914,6 @@ static int axienet_probe(struct platform_device *pdev) u64_stats_init(&lp->rx_stat_sync); u64_stats_init(&lp->tx_stat_sync); - netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll); - netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll); - lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk"); if (!lp->axi_clk) { /* For backward compatibility, if named AXI clock is not present, @@ -2008,80 +2039,85 @@ static int axienet_probe(struct platform_device *pdev) goto cleanup_clk; } - /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ - np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); - if (np) { - struct resource dmares; + if (!of_find_property(pdev->dev.of_node, "dmas", NULL)) { + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); - ret = of_address_to_resource(np, 0, &dmares); - if (ret) { - dev_err(&pdev->dev, - "unable to get DMA resource\n"); + if (np) { + struct resource dmares; + + ret = of_address_to_resource(np, 0, &dmares); + if (ret) { + dev_err(&pdev->dev, + "unable to get DMA resource\n"); + of_node_put(np); + goto cleanup_clk; + } + lp->dma_regs = devm_ioremap_resource(&pdev->dev, + &dmares); + lp->rx_irq = irq_of_parse_and_map(np, 1); + lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); + lp->eth_irq = platform_get_irq_optional(pdev, 0); + } else { + /* Check for these resources directly on the Ethernet node. */ + lp->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); + lp->rx_irq = platform_get_irq(pdev, 1); + lp->tx_irq = platform_get_irq(pdev, 0); + lp->eth_irq = platform_get_irq_optional(pdev, 2); + } + if (IS_ERR(lp->dma_regs)) { + dev_err(&pdev->dev, "could not map DMA regs\n"); + ret = PTR_ERR(lp->dma_regs); + goto cleanup_clk; + } + if (lp->rx_irq <= 0 || lp->tx_irq <= 0) { + dev_err(&pdev->dev, "could not determine irqs\n"); + ret = -ENOMEM; goto cleanup_clk; } - lp->dma_regs = devm_ioremap_resource(&pdev->dev, - &dmares); - lp->rx_irq = irq_of_parse_and_map(np, 1); - lp->tx_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); - lp->eth_irq = platform_get_irq_optional(pdev, 0); - } else { - /* Check for these resources directly on the Ethernet node. */ - lp->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); - lp->rx_irq = platform_get_irq(pdev, 1); - lp->tx_irq = platform_get_irq(pdev, 0); - lp->eth_irq = platform_get_irq_optional(pdev, 2); - } - if (IS_ERR(lp->dma_regs)) { - dev_err(&pdev->dev, "could not map DMA regs\n"); - ret = PTR_ERR(lp->dma_regs); - goto cleanup_clk; - } - if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { - dev_err(&pdev->dev, "could not determine irqs\n"); - ret = -ENOMEM; - goto cleanup_clk; - } - /* Reset core now that clocks are enabled, prior to accessing MDIO */ - ret = __axienet_device_reset(lp); - if (ret) - goto cleanup_clk; + /* Reset core now that clocks are enabled, prior to accessing MDIO */ + ret = __axienet_device_reset(lp); + if (ret) + goto cleanup_clk; + + /* Autodetect the need for 64-bit DMA pointers. + * When the IP is configured for a bus width bigger than 32 bits, + * writing the MSB registers is mandatory, even if they are all 0. + * We can detect this case by writing all 1's to one such register + * and see if that sticks: when the IP is configured for 32 bits + * only, those registers are RES0. + * Those MSB registers were introduced in IP v7.1, which we check first. + */ + if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) { + void __iomem *desc = lp->dma_regs + XAXIDMA_TX_CDESC_OFFSET + 4; - /* Autodetect the need for 64-bit DMA pointers. - * When the IP is configured for a bus width bigger than 32 bits, - * writing the MSB registers is mandatory, even if they are all 0. - * We can detect this case by writing all 1's to one such register - * and see if that sticks: when the IP is configured for 32 bits - * only, those registers are RES0. - * Those MSB registers were introduced in IP v7.1, which we check first. - */ - if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) { - void __iomem *desc = lp->dma_regs + XAXIDMA_TX_CDESC_OFFSET + 4; - - iowrite32(0x0, desc); - if (ioread32(desc) == 0) { /* sanity check */ - iowrite32(0xffffffff, desc); - if (ioread32(desc) > 0) { - lp->features |= XAE_FEATURE_DMA_64BIT; - addr_width = 64; - dev_info(&pdev->dev, - "autodetected 64-bit DMA range\n"); - } iowrite32(0x0, desc); + if (ioread32(desc) == 0) { /* sanity check */ + iowrite32(0xffffffff, desc); + if (ioread32(desc) > 0) { + lp->features |= XAE_FEATURE_DMA_64BIT; + addr_width = 64; + dev_info(&pdev->dev, + "autodetected 64-bit DMA range\n"); + } + iowrite32(0x0, desc); + } + } + if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) { + dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit archecture\n"); + ret = -EINVAL; + goto cleanup_clk; } - } - if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) { - dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit archecture\n"); - ret = -EINVAL; - goto cleanup_clk; - } - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width)); - if (ret) { - dev_err(&pdev->dev, "No suitable DMA available\n"); - goto cleanup_clk; + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width)); + if (ret) { + dev_err(&pdev->dev, "No suitable DMA available\n"); + goto cleanup_clk; + } + netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll); + netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll); } /* Check for Ethernet core IRQ (optional) */ @@ -2099,8 +2135,8 @@ static int axienet_probe(struct platform_device *pdev) } lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; - lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC; lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; + lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC; lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC; ret = axienet_mdio_setup(lp); From patchwork Wed Nov 15 18:56:53 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Radhey Shyam Pandey X-Patchwork-Id: 13457233 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=amd.com header.i=@amd.com header.b="3YKviFB3" Received: from NAM12-BN8-obe.outbound.protection.outlook.com (mail-bn8nam12on2051.outbound.protection.outlook.com [40.107.237.51]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1F9FCDC; Wed, 15 Nov 2023 10:57:29 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=WibMDIKWkPz6BVNmHVnFugUMFIkG81Vc8z1OqJOBpYzG2jrpUmIsopuT427g6wo8rGuv2+/It7e2+2fRJoctNHlvSLPyme92uNKRbmjmSSFejMrTV23pjgT8JAGuxy4BpRuFj/TBL/osn73kb3yXMz+1FnXGOJEzWODOexEOlYTFAmILi3A+IVR31KhTxP628JHv8YjiZNFQDnEbw7hLrdNKfmrqXrR4VRtHPLs4DNj9Kx2W3bzc9tXOXe8ky/uKf/kBvoAC1rhGVVbTOEgRLt2bO991MqwgJx5OseWkyxatH1I/EpVvxXttUxOGI/tMSQwsS5APi+rIzCFSLj0knw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=3UMcTflwaSmjLaYRDQePXOhsnGSlfZHfbgmKzKtUays=; b=NQjrumRXFXMNeecZAXbrhMVCd7Zk0bGIUHw/RK/W8r6086pXVmXuz5udsefUbZkZOP90Q4td3NlqGO7OQFoP+nICfUWa3EugFBLfAsYHArGvaNEqzsA6Lli6I6Keb/21WqcFwEd9CjJAfw6aP7L/yeME59Ripl5P9fs2LvT/ypmfhnnMoALlanVyAyxCIyKK02QT+PTrG0H3jMo8Z1y1ofSIulsAdfG1nYsfttGeiYFFAxlNf9jiRbEtLtPXx8YmXgm+VQU2z6arxCH6+zqEo+5FFpCV/eQZ5xmmSVJZUdWQ7wC+lZbyNYXmMd4dblj5w0n9O2ZO6pieH4XBjlYJbg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=davemloft.net smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=3UMcTflwaSmjLaYRDQePXOhsnGSlfZHfbgmKzKtUays=; b=3YKviFB3DwXGjchqR2rh9eZyxyDSn1mzrYsMViQCfNdzEKeyOnpsA/N09vwo6Cvwza/35wMVHSz90U/2kDYuYpwCFM3U0tH3QgJW1iaaflVhWSpSUaDWuCoxAkExeKdFXtEg+aGSevWgU/GIIZ09NVRbsBhUoJk2VskmN13Uh5Y= Received: from BL1PR13CA0310.namprd13.prod.outlook.com (2603:10b6:208:2c1::15) by PH7PR12MB6763.namprd12.prod.outlook.com (2603:10b6:510:1ad::8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7002.17; Wed, 15 Nov 2023 18:57:23 +0000 Received: from MN1PEPF0000F0E3.namprd04.prod.outlook.com (2603:10b6:208:2c1:cafe::ae) by BL1PR13CA0310.outlook.office365.com (2603:10b6:208:2c1::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7002.17 via Frontend Transport; Wed, 15 Nov 2023 18:57:23 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB03.amd.com; pr=C Received: from SATLEXMB03.amd.com (165.204.84.17) by MN1PEPF0000F0E3.mail.protection.outlook.com (10.167.242.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.7002.20 via Frontend Transport; Wed, 15 Nov 2023 18:57:22 +0000 Received: from SATLEXMB08.amd.com (10.181.40.132) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 12:57:22 -0600 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB08.amd.com (10.181.40.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.32; Wed, 15 Nov 2023 10:57:22 -0800 Received: from xhdradheys41.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2507.32 via Frontend Transport; Wed, 15 Nov 2023 12:57:18 -0600 From: Radhey Shyam Pandey To: , , , , , , , , , , , CC: , , , Subject: [PATCH net-next v9 3/3] net: axienet: Introduce dmaengine support Date: Thu, 16 Nov 2023 00:26:53 +0530 Message-ID: <1700074613-1977070-4-git-send-email-radhey.shyam.pandey@amd.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> References: <1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: MN1PEPF0000F0E3:EE_|PH7PR12MB6763:EE_ X-MS-Office365-Filtering-Correlation-Id: 9f53490c-1991-4219-552b-08dbe60cb38e X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17;CTRY:US;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:SATLEXMB03.amd.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230031)(4636009)(136003)(396003)(346002)(39860400002)(376002)(230922051799003)(64100799003)(451199024)(186009)(1800799009)(82310400011)(36840700001)(46966006)(40470700004)(356005)(40460700003)(921008)(36756003)(426003)(336012)(2906002)(30864003)(26005)(83380400001)(81166007)(82740400003)(47076005)(36860700001)(86362001)(41300700001)(7416002)(2616005)(5660300002)(478600001)(40480700001)(70586007)(6636002)(316002)(54906003)(70206006)(110136005)(6666004)(8676002)(8936002)(4326008)(36900700001);DIR:OUT;SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Nov 2023 18:57:22.8565 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 9f53490c-1991-4219-552b-08dbe60cb38e X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB03.amd.com] X-MS-Exchange-CrossTenant-AuthSource: MN1PEPF0000F0E3.namprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH7PR12MB6763 X-Patchwork-Delegate: kuba@kernel.org Add dmaengine framework to communicate with the xilinx DMAengine driver(AXIDMA). Axi ethernet driver uses separate channels for transmit and receive. Add support for these channels to handle TX and RX with skb and appropriate callbacks. Also add axi ethernet core interrupt for dmaengine framework support. The dmaengine framework was extended for metadata API support. However it still needs further enhancements to make it well suited for ethernet usecases. The ethernet features i.e ethtool set/get of DMA IP properties, ndo_poll_controller,(mentioned in TODO) are not supported and it requires follow-up discussions. dmaengine support has a dependency on xilinx_dma as it uses xilinx_vdma_channel_set_config() API to reset the DMA IP which internally reset MAC prior to accessing MDIO. Benchmark with netperf: xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t TCP_STREAM MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.02 886.69 xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t UDP_STREAM MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 65507 10.00 15851 0 830.66 212992 10.00 15851 830.66 Signed-off-by: Radhey Shyam Pandey --- Changes for v9: - Use the reverse x-mas tree order. - In axienet_start_xmit_dmaengine() create drop_skb label to reuse exit error handling. - Implement advance stopping and waking netdev queues and update perf numbers in commit description. - Make axienet_start_xmit_dmaengine() return void. Changes for v8: - Use dev_consume_skb_any() in transmit callback. - Fix queue stop logic in _xmit_dmaengine(). - Fix skb leak in _xmit_dmaengine() error path. - In dmaengine tx path use dma_device pointer to call prep_slave_sg. - In rx submit use rate limiting for mapping errors and fix error handling. - Revert dev_err_probe from _init_dmaengine(). - Remove unnecessary new line after call to _init_dmaengine(). - Move free_irq(lp->eth_irq) to error path. - Have separate netdev_ops for dmaengine flow. - Improve axienet_dma_tx_cb and axienet_rx_submit_desc documentation. Changes for v7: - Fix comment spaces. - In xmit use correct XAE_FEATURE_PARTIAL_TX_CSUM define. - Rename app to app_metadata. - Switch to __netif_rx. - In axienet_rx_submit_desc() add mapping error handling. Changes for v6: - Rename struct axi_skbuff to skbuf_dma_descriptor and removed __packed attribute. - Drop kmem_cache implementation and switch to using ring buffers. - Remove __inline from axienet_init_dmaengine(). - Name labels after the target. - Add error check for platform_get_irq_optional(). - Fix double space and no empty lines between call and its error check. Changes for v5: - Switch to amd.com email - Modified commit description. Remove lore link, mention reset API, add performance numbers. - Fix kmem_cache resource leak on stop. - Use dmaengine_terminate_sync instead of deprecated dmaengine_terminate_all API. Changes for v4: - Remove the AXIENET_USE_DMA. - Add dev_err_probe for dma_request_chan error handling. - Add kmem_cache_destroy for create in axienet_setup_dma_chan. - Add XILINX_DMA dependency in ethernet drier Kconfig file. - move setup_dma_channel to init_dmaengine func - Remove unlikely if (unlikely(ret < 0)) - if (ret == 0) to if (!ret) - Rename DMA_MEM_TO_DEV to DMA_TO_DEVICE - Remove else check for lp->use_dmaengine = 1; in the probe. Changes in V3: - New patch for dmaengine framework support. --- drivers/net/ethernet/xilinx/Kconfig | 1 + drivers/net/ethernet/xilinx/xilinx_axienet.h | 33 ++ .../net/ethernet/xilinx/xilinx_axienet_main.c | 393 +++++++++++++++++- 3 files changed, 425 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 0014729b8865..35d96c633a33 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -26,6 +26,7 @@ config XILINX_EMACLITE config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" depends on HAS_IOMEM + depends on XILINX_DMA select PHYLINK help This driver supports the 10/100/1000 Ethernet from Xilinx for the diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 3ead0bac597b..807ead678551 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -14,6 +14,7 @@ #include #include #include +#include /* Packet size info */ #define XAE_HDR_SIZE 14 /* Size of Ethernet header */ @@ -378,6 +379,22 @@ struct axidma_bd { #define XAE_NUM_MISC_CLOCKS 3 +/** + * struct skbuf_dma_descriptor - skb for each dma descriptor + * @sgl: Pointer for sglist. + * @desc: Pointer to dma descriptor. + * @dma_address: dma address of sglist. + * @skb: Pointer to SKB transferred using DMA + * @sg_len: number of entries in the sglist. + */ +struct skbuf_dma_descriptor { + struct scatterlist sgl[MAX_SKB_FRAGS + 1]; + struct dma_async_tx_descriptor *desc; + dma_addr_t dma_address; + struct sk_buff *skb; + int sg_len; +}; + /** * struct axienet_local - axienet private per device data * @ndev: Pointer for net_device to which it will be attached. @@ -436,6 +453,14 @@ struct axidma_bd { * @coalesce_count_tx: Store the irq coalesce on TX side. * @coalesce_usec_tx: IRQ coalesce delay for TX * @use_dmaengine: flag to check dmaengine framework usage. + * @tx_chan: TX DMA channel. + * @rx_chan: RX DMA channel. + * @tx_skb_ring: Pointer to TX skb ring buffer array. + * @rx_skb_ring: Pointer to RX skb ring buffer array. + * @tx_ring_head: TX skb ring buffer head index. + * @tx_ring_tail: TX skb ring buffer tail index. + * @rx_ring_head: RX skb ring buffer head index. + * @rx_ring_tail: RX skb ring buffer tail index. */ struct axienet_local { struct net_device *ndev; @@ -501,6 +526,14 @@ struct axienet_local { u32 coalesce_count_tx; u32 coalesce_usec_tx; u8 use_dmaengine; + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; + struct skbuf_dma_descriptor **tx_skb_ring; + struct skbuf_dma_descriptor **rx_skb_ring; + int tx_ring_head; + int tx_ring_tail; + int rx_ring_head; + int rx_ring_tail; }; /** diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 188b03e86263..7d8e22929385 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -38,6 +38,11 @@ #include #include #include +#include +#include +#include +#include +#include #include "xilinx_axienet.h" @@ -47,6 +52,9 @@ #define TX_BD_NUM_MIN (MAX_SKB_FRAGS + 1) #define TX_BD_NUM_MAX 4096 #define RX_BD_NUM_MAX 4096 +#define DMA_NUM_APP_WORDS 5 +#define LEN_APP 4 +#define RX_BUF_NUM_DEFAULT 128 /* Must be shorter than length of ethtool_drvinfo.driver field to fit */ #define DRIVER_NAME "xaxienet" @@ -55,6 +63,8 @@ #define AXIENET_REGS_N 40 +static void axienet_rx_submit_desc(struct net_device *ndev); + /* Match table for of_platform binding */ static const struct of_device_id axienet_of_match[] = { { .compatible = "xlnx,axi-ethernet-1.00.a", }, @@ -120,6 +130,16 @@ static struct axienet_option axienet_options[] = { {} }; +static struct skbuf_dma_descriptor *axienet_get_rx_desc(struct axienet_local *lp, int i) +{ + return lp->rx_skb_ring[i & (RX_BUF_NUM_DEFAULT - 1)]; +} + +static struct skbuf_dma_descriptor *axienet_get_tx_desc(struct axienet_local *lp, int i) +{ + return lp->tx_skb_ring[i & (TX_BD_NUM_MAX - 1)]; +} + /** * axienet_dma_in32 - Memory mapped Axi DMA register read * @lp: Pointer to axienet local structure @@ -727,6 +747,128 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp, return 0; } +/** + * axienet_dma_tx_cb - DMA engine callback for TX channel. + * @data: Pointer to the axienet_local structure. + * @result: error reporting through dmaengine_result. + * This function is called by dmaengine driver for TX channel to notify + * that the transmit is done. + */ +static void axienet_dma_tx_cb(void *data, const struct dmaengine_result *result) +{ + struct skbuf_dma_descriptor *skbuf_dma; + struct axienet_local *lp = data; + struct netdev_queue *txq; + int len; + + skbuf_dma = axienet_get_tx_desc(lp, lp->tx_ring_tail++); + len = skbuf_dma->skb->len; + txq = skb_get_tx_queue(lp->ndev, skbuf_dma->skb); + u64_stats_update_begin(&lp->tx_stat_sync); + u64_stats_add(&lp->tx_bytes, len); + u64_stats_add(&lp->tx_packets, 1); + u64_stats_update_end(&lp->tx_stat_sync); + dma_unmap_sg(lp->dev, skbuf_dma->sgl, skbuf_dma->sg_len, DMA_TO_DEVICE); + dev_consume_skb_any(skbuf_dma->skb); + netif_txq_completed_wake(txq, 1, len, + CIRC_SPACE(lp->tx_ring_head, lp->tx_ring_tail, TX_BD_NUM_MAX), + 2 * MAX_SKB_FRAGS); +} + +/** + * axienet_start_xmit_dmaengine - Starts the transmission. + * @skb: sk_buff pointer that contains data to be Txed. + * @ndev: Pointer to net_device structure. + * + * Return: NETDEV_TX_OK on success or any non space errors. + * NETDEV_TX_BUSY when free element in TX skb ring buffer + * is not available. + * + * This function is invoked to initiate transmission. The + * function sets the skbs, register dma callback API and submit + * the dma transaction. + * Additionally if checksum offloading is supported, + * it populates AXI Stream Control fields with appropriate values. + */ +static netdev_tx_t +axienet_start_xmit_dmaengine(struct sk_buff *skb, struct net_device *ndev) +{ + struct dma_async_tx_descriptor *dma_tx_desc = NULL; + struct axienet_local *lp = netdev_priv(ndev); + u32 app_metadata[DMA_NUM_APP_WORDS] = {0}; + struct skbuf_dma_descriptor *skbuf_dma; + struct dma_device *dma_dev; + struct netdev_queue *txq; + u32 csum_start_off; + u32 csum_index_off; + int sg_len; + int ret; + + dma_dev = lp->tx_chan->device; + sg_len = skb_shinfo(skb)->nr_frags + 1; + if (CIRC_SPACE(lp->tx_ring_head, lp->tx_ring_tail, TX_BD_NUM_MAX) <= sg_len) { + netif_stop_queue(ndev); + if (net_ratelimit()) + netdev_warn(ndev, "TX ring unexpectedly full\n"); + return NETDEV_TX_BUSY; + } + + skbuf_dma = axienet_get_tx_desc(lp, lp->tx_ring_head); + if (!skbuf_dma) + goto xmit_error_drop_skb; + + lp->tx_ring_head++; + sg_init_table(skbuf_dma->sgl, sg_len); + ret = skb_to_sgvec(skb, skbuf_dma->sgl, 0, skb->len); + if (ret < 0) + goto xmit_error_drop_skb; + + ret = dma_map_sg(lp->dev, skbuf_dma->sgl, sg_len, DMA_TO_DEVICE); + if (!ret) + goto xmit_error_drop_skb; + + /* Fill up app fields for checksum */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { + /* Tx Full Checksum Offload Enabled */ + app_metadata[0] |= 2; + } else if (lp->features & XAE_FEATURE_PARTIAL_TX_CSUM) { + csum_start_off = skb_transport_offset(skb); + csum_index_off = csum_start_off + skb->csum_offset; + /* Tx Partial Checksum Offload Enabled */ + app_metadata[0] |= 1; + app_metadata[1] = (csum_start_off << 16) | csum_index_off; + } + } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + app_metadata[0] |= 2; /* Tx Full Checksum Offload Enabled */ + } + + dma_tx_desc = dma_dev->device_prep_slave_sg(lp->tx_chan, skbuf_dma->sgl, + sg_len, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT, (void *)app_metadata); + if (!dma_tx_desc) + goto xmit_error_unmap_sg; + + skbuf_dma->skb = skb; + skbuf_dma->sg_len = sg_len; + dma_tx_desc->callback_param = lp; + dma_tx_desc->callback_result = axienet_dma_tx_cb; + dmaengine_submit(dma_tx_desc); + dma_async_issue_pending(lp->tx_chan); + txq = skb_get_tx_queue(lp->ndev, skb); + netdev_tx_sent_queue(txq, skb->len); + netif_txq_maybe_stop(txq, CIRC_SPACE(lp->tx_ring_head, lp->tx_ring_tail, TX_BD_NUM_MAX), + MAX_SKB_FRAGS + 1, 2 * MAX_SKB_FRAGS); + + return NETDEV_TX_OK; + +xmit_error_unmap_sg: + dma_unmap_sg(lp->dev, skbuf_dma->sgl, sg_len, DMA_TO_DEVICE); +xmit_error_drop_skb: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + /** * axienet_tx_poll - Invoked once a transmit is completed by the * Axi DMA Tx channel. @@ -893,6 +1035,42 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/** + * axienet_dma_rx_cb - DMA engine callback for RX channel. + * @data: Pointer to the skbuf_dma_descriptor structure. + * @result: error reporting through dmaengine_result. + * This function is called by dmaengine driver for RX channel to notify + * that the packet is received. + */ +static void axienet_dma_rx_cb(void *data, const struct dmaengine_result *result) +{ + struct skbuf_dma_descriptor *skbuf_dma; + size_t meta_len, meta_max_len, rx_len; + struct axienet_local *lp = data; + struct sk_buff *skb; + u32 *app_metadata; + + skbuf_dma = axienet_get_rx_desc(lp, lp->rx_ring_tail++); + skb = skbuf_dma->skb; + app_metadata = dmaengine_desc_get_metadata_ptr(skbuf_dma->desc, &meta_len, + &meta_max_len); + dma_unmap_single(lp->dev, skbuf_dma->dma_address, lp->max_frm_size, + DMA_FROM_DEVICE); + /* TODO: Derive app word index programmatically */ + rx_len = (app_metadata[LEN_APP] & 0xFFFF); + skb_put(skb, rx_len); + skb->protocol = eth_type_trans(skb, lp->ndev); + skb->ip_summed = CHECKSUM_NONE; + + __netif_rx(skb); + u64_stats_update_begin(&lp->rx_stat_sync); + u64_stats_add(&lp->rx_packets, 1); + u64_stats_add(&lp->rx_bytes, rx_len); + u64_stats_update_end(&lp->rx_stat_sync); + axienet_rx_submit_desc(lp->ndev); + dma_async_issue_pending(lp->rx_chan); +} + /** * axienet_rx_poll - Triggered by RX ISR to complete the BD processing. * @napi: Pointer to NAPI structure. @@ -1126,6 +1304,144 @@ static irqreturn_t axienet_eth_irq(int irq, void *_ndev) static void axienet_dma_err_handler(struct work_struct *work); +/** + * axienet_rx_submit_desc - Submit the rx descriptors to dmaengine. + * allocate skbuff, map the scatterlist and obtain a descriptor + * and then add the callback information and submit descriptor. + * + * @ndev: net_device pointer + * + */ +static void axienet_rx_submit_desc(struct net_device *ndev) +{ + struct dma_async_tx_descriptor *dma_rx_desc = NULL; + struct axienet_local *lp = netdev_priv(ndev); + struct skbuf_dma_descriptor *skbuf_dma; + struct sk_buff *skb; + dma_addr_t addr; + + skbuf_dma = axienet_get_rx_desc(lp, lp->rx_ring_head); + if (!skbuf_dma) + return; + + lp->rx_ring_head++; + skb = netdev_alloc_skb(ndev, lp->max_frm_size); + if (!skb) + return; + + sg_init_table(skbuf_dma->sgl, 1); + addr = dma_map_single(lp->dev, skb->data, lp->max_frm_size, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(lp->dev, addr))) { + if (net_ratelimit()) + netdev_err(ndev, "DMA mapping error\n"); + goto rx_submit_err_free_skb; + } + sg_dma_address(skbuf_dma->sgl) = addr; + sg_dma_len(skbuf_dma->sgl) = lp->max_frm_size; + dma_rx_desc = dmaengine_prep_slave_sg(lp->rx_chan, skbuf_dma->sgl, + 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma_rx_desc) + goto rx_submit_err_unmap_skb; + + skbuf_dma->skb = skb; + skbuf_dma->dma_address = sg_dma_address(skbuf_dma->sgl); + skbuf_dma->desc = dma_rx_desc; + dma_rx_desc->callback_param = lp; + dma_rx_desc->callback_result = axienet_dma_rx_cb; + dmaengine_submit(dma_rx_desc); + + return; + +rx_submit_err_unmap_skb: + dma_unmap_single(lp->dev, addr, lp->max_frm_size, DMA_FROM_DEVICE); +rx_submit_err_free_skb: + dev_kfree_skb(skb); +} + +/** + * axienet_init_dmaengine - init the dmaengine code. + * @ndev: Pointer to net_device structure + * + * Return: 0, on success. + * non-zero error value on failure + * + * This is the dmaengine initialization code. + */ +static int axienet_init_dmaengine(struct net_device *ndev) +{ + struct axienet_local *lp = netdev_priv(ndev); + struct skbuf_dma_descriptor *skbuf_dma; + int i, ret; + + lp->tx_chan = dma_request_chan(lp->dev, "tx_chan0"); + if (IS_ERR(lp->tx_chan)) { + dev_err(lp->dev, "No Ethernet DMA (TX) channel found\n"); + return PTR_ERR(lp->tx_chan); + } + + lp->rx_chan = dma_request_chan(lp->dev, "rx_chan0"); + if (IS_ERR(lp->rx_chan)) { + ret = PTR_ERR(lp->rx_chan); + dev_err(lp->dev, "No Ethernet DMA (RX) channel found\n"); + goto err_dma_release_tx; + } + + lp->tx_ring_tail = 0; + lp->tx_ring_head = 0; + lp->rx_ring_tail = 0; + lp->rx_ring_head = 0; + lp->tx_skb_ring = kcalloc(TX_BD_NUM_MAX, sizeof(*lp->tx_skb_ring), + GFP_KERNEL); + if (!lp->tx_skb_ring) { + ret = -ENOMEM; + goto err_dma_release_rx; + } + for (i = 0; i < TX_BD_NUM_MAX; i++) { + skbuf_dma = kzalloc(sizeof(*skbuf_dma), GFP_KERNEL); + if (!skbuf_dma) { + ret = -ENOMEM; + goto err_free_tx_skb_ring; + } + lp->tx_skb_ring[i] = skbuf_dma; + } + + lp->rx_skb_ring = kcalloc(RX_BUF_NUM_DEFAULT, sizeof(*lp->rx_skb_ring), + GFP_KERNEL); + if (!lp->rx_skb_ring) { + ret = -ENOMEM; + goto err_free_tx_skb_ring; + } + for (i = 0; i < RX_BUF_NUM_DEFAULT; i++) { + skbuf_dma = kzalloc(sizeof(*skbuf_dma), GFP_KERNEL); + if (!skbuf_dma) { + ret = -ENOMEM; + goto err_free_rx_skb_ring; + } + lp->rx_skb_ring[i] = skbuf_dma; + } + /* TODO: Instead of BD_NUM_DEFAULT use runtime support */ + for (i = 0; i < RX_BUF_NUM_DEFAULT; i++) + axienet_rx_submit_desc(ndev); + dma_async_issue_pending(lp->rx_chan); + + return 0; + +err_free_rx_skb_ring: + for (i = 0; i < RX_BUF_NUM_DEFAULT; i++) + kfree(lp->rx_skb_ring[i]); + kfree(lp->rx_skb_ring); +err_free_tx_skb_ring: + for (i = 0; i < TX_BD_NUM_MAX; i++) + kfree(lp->tx_skb_ring[i]); + kfree(lp->tx_skb_ring); +err_dma_release_rx: + dma_release_channel(lp->rx_chan); +err_dma_release_tx: + dma_release_channel(lp->tx_chan); + return ret; +} + /** * axienet_init_legacy_dma - init the dma legacy code. * @ndev: Pointer to net_device structure @@ -1216,7 +1532,19 @@ static int axienet_open(struct net_device *ndev) phylink_start(lp->phylink); - if (!lp->use_dmaengine) { + if (lp->use_dmaengine) { + /* Enable interrupts for Axi Ethernet core (if defined) */ + if (lp->eth_irq > 0) { + ret = request_irq(lp->eth_irq, axienet_eth_irq, IRQF_SHARED, + ndev->name, ndev); + if (ret) + goto err_phy; + } + + ret = axienet_init_dmaengine(ndev); + if (ret < 0) + goto err_free_eth_irq; + } else { ret = axienet_init_legacy_dma(ndev); if (ret) goto err_phy; @@ -1224,6 +1552,9 @@ static int axienet_open(struct net_device *ndev) return 0; +err_free_eth_irq: + if (lp->eth_irq > 0) + free_irq(lp->eth_irq, ndev); err_phy: phylink_stop(lp->phylink); phylink_disconnect_phy(lp->phylink); @@ -1243,6 +1574,7 @@ static int axienet_open(struct net_device *ndev) static int axienet_stop(struct net_device *ndev) { struct axienet_local *lp = netdev_priv(ndev); + int i; dev_dbg(&ndev->dev, "axienet_close()\n"); @@ -1263,6 +1595,21 @@ static int axienet_stop(struct net_device *ndev) free_irq(lp->tx_irq, ndev); free_irq(lp->rx_irq, ndev); axienet_dma_bd_release(ndev); + } else { + dmaengine_terminate_sync(lp->tx_chan); + dmaengine_synchronize(lp->tx_chan); + dmaengine_terminate_sync(lp->rx_chan); + dmaengine_synchronize(lp->rx_chan); + + for (i = 0; i < TX_BD_NUM_MAX; i++) + kfree(lp->tx_skb_ring[i]); + kfree(lp->tx_skb_ring); + for (i = 0; i < RX_BUF_NUM_DEFAULT; i++) + kfree(lp->rx_skb_ring[i]); + kfree(lp->rx_skb_ring); + + dma_release_channel(lp->rx_chan); + dma_release_channel(lp->tx_chan); } axienet_iow(lp, XAE_IE_OFFSET, 0); @@ -1365,6 +1712,18 @@ static const struct net_device_ops axienet_netdev_ops = { #endif }; +static const struct net_device_ops axienet_netdev_dmaengine_ops = { + .ndo_open = axienet_open, + .ndo_stop = axienet_stop, + .ndo_start_xmit = axienet_start_xmit_dmaengine, + .ndo_get_stats64 = axienet_get_stats64, + .ndo_change_mtu = axienet_change_mtu, + .ndo_set_mac_address = netdev_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_eth_ioctl = axienet_ioctl, + .ndo_set_rx_mode = axienet_set_multicast_list, +}; + /** * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information. * @ndev: Pointer to net_device structure @@ -1897,7 +2256,6 @@ static int axienet_probe(struct platform_device *pdev) SET_NETDEV_DEV(ndev, &pdev->dev); ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ ndev->features = NETIF_F_SG; - ndev->netdev_ops = &axienet_netdev_ops; ndev->ethtool_ops = &axienet_ethtool_ops; /* MTU range: 64 - 9000 */ @@ -2118,8 +2476,39 @@ static int axienet_probe(struct platform_device *pdev) } netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll); netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll); + } else { + struct xilinx_vdma_config cfg; + struct dma_chan *tx_chan; + + lp->eth_irq = platform_get_irq_optional(pdev, 0); + if (lp->eth_irq < 0 && lp->eth_irq != -ENXIO) { + ret = lp->eth_irq; + goto cleanup_clk; + } + tx_chan = dma_request_chan(lp->dev, "tx_chan0"); + if (IS_ERR(tx_chan)) { + ret = PTR_ERR(tx_chan); + dev_err_probe(lp->dev, ret, "No Ethernet DMA (TX) channel found\n"); + goto cleanup_clk; + } + + cfg.reset = 1; + /* As name says VDMA but it has support for DMA channel reset */ + ret = xilinx_vdma_channel_set_config(tx_chan, &cfg); + if (ret < 0) { + dev_err(&pdev->dev, "Reset channel failed\n"); + dma_release_channel(tx_chan); + goto cleanup_clk; + } + + dma_release_channel(tx_chan); + lp->use_dmaengine = 1; } + if (lp->use_dmaengine) + ndev->netdev_ops = &axienet_netdev_dmaengine_ops; + else + ndev->netdev_ops = &axienet_netdev_ops; /* Check for Ethernet core IRQ (optional) */ if (lp->eth_irq <= 0) dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");