From patchwork Tue Nov 28 13:25:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13471145 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="mEHNKLHv" Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B9D84D62; Tue, 28 Nov 2023 05:25:40 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPA id 9B55C60009; Tue, 28 Nov 2023 13:25:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1701177939; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=SyiaO9HgdrBqhU0Gl75fcW5E9j4W4iTYn9rQ8vzYLtw=; b=mEHNKLHvpMEBrVPjvuLnpr9/e6rrIdH2WDf4tKGvf0Gnu7dHZosNCT3J0XK8LB6oe5EnuJ IhwL+QY4MyPv3Ky5X+3vdgHUD4rvGEt2ATH+cprwsiu/B4kGaAkkCSLUqLb9b6bltwXJ80 VtJN/OhyP7Yf7vosKS5+ljpUG37f/SGmu1fasPJi9JBTj5Sgby7vipwi5laLy8zKL8w89z RSgcjuk8ZUF+fMa/ZK9SQi82J1Z6mkMUqx1xUCwQyPY3Z4gbH+7TTy6fjNGrngqmmyJIuD hFeTJRELyaDVxQQ4WJ6lOiq2Rrs6laaAIJaZWr/ZF9IreEP8bxwThjDz6a1jZw== From: Herve Codina To: Herve Codina , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Andrew Lunn , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Linus Walleij , Liam Girdwood , Mark Brown Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Christophe Leroy , Thomas Petazzoni Subject: [PATCH 1/5] net: wan: Add framer framework support Date: Tue, 28 Nov 2023 14:25:30 +0100 Message-ID: <20231128132534.258459-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231128132534.258459-1-herve.codina@bootlin.com> References: <20231128132534.258459-1-herve.codina@bootlin.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: herve.codina@bootlin.com X-Patchwork-Delegate: kuba@kernel.org A framer is a component in charge of an E1/T1 line interface. Connected usually to a TDM bus, it converts TDM frames to/from E1/T1 frames. It also provides information related to the E1/T1 line. The framer framework provides a set of APIs for the framer drivers (framer provider) to create/destroy a framer and APIs for the framer users (framer consumer) to obtain a reference to the framer, and use the framer. This basic implementation provides a framer abstraction for: - power on/off the framer - get the framer status (line state) - be notified on framer status changes - get/set the framer configuration Signed-off-by: Herve Codina Reviewed-by: Christophe Leroy Acked-by: Jakub Kicinski --- drivers/net/wan/Kconfig | 2 + drivers/net/wan/Makefile | 2 + drivers/net/wan/framer/Kconfig | 25 + drivers/net/wan/framer/Makefile | 6 + drivers/net/wan/framer/framer-core.c | 882 +++++++++++++++++++++++++ include/linux/framer/framer-provider.h | 194 ++++++ include/linux/framer/framer.h | 205 ++++++ 7 files changed, 1316 insertions(+) create mode 100644 drivers/net/wan/framer/Kconfig create mode 100644 drivers/net/wan/framer/Makefile create mode 100644 drivers/net/wan/framer/framer-core.c create mode 100644 include/linux/framer/framer-provider.h create mode 100644 include/linux/framer/framer.h diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index dcb069dde66b..7dda87756d3f 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -95,6 +95,8 @@ config HDLC_X25 comment "X.25/LAPB support is disabled" depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y +source "drivers/net/wan/framer/Kconfig" + config PCI200SYN tristate "Goramo PCI200SYN support" depends on HDLC && PCI diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 5bec8fae47f8..8119b49d1da9 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -14,6 +14,8 @@ obj-$(CONFIG_HDLC_FR) += hdlc_fr.o obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o obj-$(CONFIG_HDLC_X25) += hdlc_x25.o +obj-y += framer/ + obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_LAPBETHER) += lapbether.o diff --git a/drivers/net/wan/framer/Kconfig b/drivers/net/wan/framer/Kconfig new file mode 100644 index 000000000000..57fe7ba6aa37 --- /dev/null +++ b/drivers/net/wan/framer/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# FRAMER +# + +menuconfig FRAMER + tristate "Framer Subsystem" + help + A framer is a component in charge of an E1/T1 line interface. + Connected usually to a TDM bus, it converts TDM frames to/from E1/T1 + frames. It also provides information related to the E1/T1 line. + Used with HDLC, the network can be reached through the E1/T1 line. + + This framework is designed to provide a generic interface for framer + devices present in the kernel. This layer will have the generic + API by which framer drivers can create framer using the framer + framework and framer users can obtain reference to the framer. + All the users of this framework should select this config. + +if FRAMER + +config GENERIC_FRAMER + bool + +endif # FRAMER diff --git a/drivers/net/wan/framer/Makefile b/drivers/net/wan/framer/Makefile new file mode 100644 index 000000000000..78dbd8e563d0 --- /dev/null +++ b/drivers/net/wan/framer/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the framer drivers. +# + +obj-$(CONFIG_GENERIC_FRAMER) += framer-core.o diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c new file mode 100644 index 000000000000..c04dc88bda6c --- /dev/null +++ b/drivers/net/wan/framer/framer-core.c @@ -0,0 +1,882 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Generic Framer framework. + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct class *framer_class; +static DEFINE_MUTEX(framer_provider_mutex); +static LIST_HEAD(framer_provider_list); +static DEFINE_IDA(framer_ida); + +#define dev_to_framer(a) (container_of((a), struct framer, dev)) + +int framer_pm_runtime_get(struct framer *framer) +{ + int ret; + + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + ret = pm_runtime_get(&framer->dev); + if (ret < 0 && ret != -EINPROGRESS) + pm_runtime_put_noidle(&framer->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_get); + +int framer_pm_runtime_get_sync(struct framer *framer) +{ + int ret; + + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + ret = pm_runtime_get_sync(&framer->dev); + if (ret < 0) + pm_runtime_put_sync(&framer->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_get_sync); + +int framer_pm_runtime_put(struct framer *framer) +{ + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + return pm_runtime_put(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_put); + +int framer_pm_runtime_put_sync(struct framer *framer) +{ + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + return pm_runtime_put_sync(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_put_sync); + +/** + * framer_init - framer internal initialization before framer operation + * @framer: the framer returned by framer_get() + * + * Used to allow framer's driver to perform framer internal initialization, + * such as PLL block powering, clock initialization or anything that's + * is required by the framer to perform the start of operation. + * Must be called before framer_power_on(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_init(struct framer *framer) +{ + bool start_polling = false; + int ret; + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + return ret; + ret = 0; /* Override possible ret == -EOPNOTSUPP */ + + mutex_lock(&framer->mutex); + if (framer->power_count > framer->init_count) + dev_warn(&framer->dev, "framer_power_on was called before framer init\n"); + + if (framer->init_count == 0) { + if (framer->ops->init) { + ret = framer->ops->init(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer init failed --> %d\n", ret); + goto out; + } + } + if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) + start_polling = true; + } + ++framer->init_count; + +out: + mutex_unlock(&framer->mutex); + + if (!ret && start_polling) { + ret = framer_get_status(framer, &framer->prev_status); + if (ret < 0) { + dev_warn(&framer->dev, "framer get status failed --> %d\n", ret); + /* Will be retried on polling_work */ + ret = 0; + } + queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ); + } + + framer_pm_runtime_put(framer); + return ret; +} +EXPORT_SYMBOL_GPL(framer_init); + +/** + * framer_exit - Framer internal un-initialization + * @framer: the framer returned by framer_get() + * + * Must be called after framer_power_off(). + */ +int framer_exit(struct framer *framer) +{ + int ret; + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + return ret; + ret = 0; /* Override possible ret == -EOPNOTSUPP */ + + mutex_lock(&framer->mutex); + --framer->init_count; + if (framer->init_count == 0) { + if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) { + mutex_unlock(&framer->mutex); + cancel_delayed_work_sync(&framer->polling_work); + mutex_lock(&framer->mutex); + } + + if (framer->ops->exit) + framer->ops->exit(framer); + } + + mutex_unlock(&framer->mutex); + framer_pm_runtime_put(framer); + return ret; +} +EXPORT_SYMBOL_GPL(framer_exit); + +/** + * framer_power_on - Enable the framer and enter proper operation + * @framer: the framer returned by framer_get() + * + * Must be called after framer_init(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_power_on(struct framer *framer) +{ + int ret; + + if (framer->pwr) { + ret = regulator_enable(framer->pwr); + if (ret) + return ret; + } + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + goto err_pm_sync; + + mutex_lock(&framer->mutex); + if (framer->power_count == 0 && framer->ops->power_on) { + ret = framer->ops->power_on(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer poweron failed --> %d\n", ret); + goto err_pwr_on; + } + } + ++framer->power_count; + mutex_unlock(&framer->mutex); + return 0; + +err_pwr_on: + mutex_unlock(&framer->mutex); + framer_pm_runtime_put_sync(framer); +err_pm_sync: + if (framer->pwr) + regulator_disable(framer->pwr); + return ret; +} +EXPORT_SYMBOL_GPL(framer_power_on); + +/** + * framer_power_off - Disable the framer. + * @framer: the framer returned by framer_get() + * + * Must be called before framer_exit(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_power_off(struct framer *framer) +{ + int ret; + + mutex_lock(&framer->mutex); + if (framer->power_count == 1 && framer->ops->power_off) { + ret = framer->ops->power_off(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret); + mutex_unlock(&framer->mutex); + return ret; + } + } + --framer->power_count; + mutex_unlock(&framer->mutex); + framer_pm_runtime_put(framer); + + if (framer->pwr) + regulator_disable(framer->pwr); + + return 0; +} +EXPORT_SYMBOL_GPL(framer_power_off); + +/** + * framer_get_status() - Gets the framer status + * @framer: the framer returned by framer_get() + * @status: the status to retrieve + * + * Used to get the framer status. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_get_status(struct framer *framer, struct framer_status *status) +{ + int ret; + + if (!framer->ops->get_status) + return -EOPNOTSUPP; + + /* Be sure to have known values (struct padding and future extensions) */ + memset(status, 0, sizeof(*status)); + + mutex_lock(&framer->mutex); + ret = framer->ops->get_status(framer, status); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_get_status); + +/** + * framer_set_config() - Sets the framer configuration + * @framer: the framer returned by framer_get() + * @config: the configuration to set + * + * Used to set the framer configuration. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_set_config(struct framer *framer, const struct framer_config *config) +{ + int ret; + + if (!framer->ops->set_config) + return -EOPNOTSUPP; + + mutex_lock(&framer->mutex); + ret = framer->ops->set_config(framer, config); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_set_config); + +/** + * framer_get_config() - Gets the framer configuration + * @framer: the framer returned by framer_get() + * @config: the configuration to retrieve + * + * Used to get the framer configuration. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_get_config(struct framer *framer, struct framer_config *config) +{ + int ret; + + if (!framer->ops->get_config) + return -EOPNOTSUPP; + + mutex_lock(&framer->mutex); + ret = framer->ops->get_config(framer, config); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_get_config); + +static void framer_polling_work(struct work_struct *work) +{ + struct framer *framer = container_of(work, struct framer, polling_work.work); + struct framer_status status; + int ret; + + ret = framer_get_status(framer, &status); + if (ret) { + dev_err(&framer->dev, "polling, get status failed (%d)\n", ret); + goto end; + } + if (memcmp(&framer->prev_status, &status, sizeof(status))) { + blocking_notifier_call_chain(&framer->notifier_list, + FRAMER_EVENT_STATUS, NULL); + memcpy(&framer->prev_status, &status, sizeof(status)); + } + +end: + /* Re-schedule task in 1 sec */ + queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ); +} + +/** + * framer_notifier_register() - Registers a notifier + * @framer: the framer returned by framer_get() + * @nb: the notifier block to register + * + * Used to register a notifier block on framer events. framer_init() must have + * been called on the framer. + * The available framer events are present in enum framer_events. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_notifier_register(struct framer *framer, struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&framer->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(framer_notifier_register); + +/** + * framer_notifier_unregister() - Unregisters a notifier + * @framer: the framer returned by framer_get() + * @nb: the notifier block to unregister + * + * Used to unregister a notifier block. framer_init() must have + * been called on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&framer->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(framer_notifier_unregister); + +static struct framer_provider *framer_provider_of_lookup(const struct device_node *node) +{ + struct framer_provider *framer_provider; + + list_for_each_entry(framer_provider, &framer_provider_list, list) { + if (device_match_of_node(framer_provider->dev, node)) + return framer_provider; + } + + return ERR_PTR(-EPROBE_DEFER); +} + +static struct framer *framer_of_get_from_provider(struct of_phandle_args *args) +{ + struct framer_provider *framer_provider; + struct framer *framer; + + mutex_lock(&framer_provider_mutex); + framer_provider = framer_provider_of_lookup(args->np); + if (IS_ERR(framer_provider) || !try_module_get(framer_provider->owner)) { + framer = ERR_PTR(-EPROBE_DEFER); + goto end; + } + + framer = framer_provider->of_xlate(framer_provider->dev, args); + + module_put(framer_provider->owner); + +end: + mutex_unlock(&framer_provider_mutex); + + return framer; +} + +static struct framer *framer_of_get_byphandle(struct device_node *np, const char *propname, + int index) +{ + struct of_phandle_args args; + struct framer *framer; + int ret; + + ret = of_parse_phandle_with_optional_args(np, propname, "#framer-cells", index, &args); + if (ret) + return ERR_PTR(-ENODEV); + + if (!of_device_is_available(args.np)) { + framer = ERR_PTR(-ENODEV); + goto out_node_put; + } + + framer = framer_of_get_from_provider(&args); + +out_node_put: + of_node_put(args.np); + + return framer; +} + +static struct framer *framer_of_get_byparent(struct device_node *np, int index) +{ + struct of_phandle_args args; + struct framer *framer; + + args.np = of_get_parent(np); + args.args_count = 1; + args.args[0] = index; + + while (args.np) { + framer = framer_of_get_from_provider(&args); + if (IS_ERR(framer) && PTR_ERR(framer) != -EPROBE_DEFER) { + args.np = of_get_next_parent(args.np); + continue; + } + of_node_put(args.np); + return framer; + } + + return ERR_PTR(-ENODEV); +} + +/** + * framer_get() - lookup and obtain a reference to a framer. + * @dev: device that requests the framer + * @con_id: name of the framer from device's point of view + * + * Returns the framer driver, after getting a refcount to it; or + * -ENODEV if there is no such framer. The caller is responsible for + * calling framer_put() to release that count. + */ +struct framer *framer_get(struct device *dev, const char *con_id) +{ + struct framer *framer = ERR_PTR(-ENODEV); + struct device_link *link; + int ret; + + if (dev->of_node) { + if (con_id) + framer = framer_of_get_byphandle(dev->of_node, con_id, 0); + else + framer = framer_of_get_byparent(dev->of_node, 0); + } + + if (IS_ERR(framer)) + return framer; + + get_device(&framer->dev); + + if (!try_module_get(framer->ops->owner)) { + ret = -EPROBE_DEFER; + goto err_put_device; + } + + link = device_link_add(dev, &framer->dev, DL_FLAG_STATELESS); + if (!link) { + dev_err(dev, "failed to create device_link to %s\n", dev_name(&framer->dev)); + ret = -EPROBE_DEFER; + goto err_module_put; + } + + return framer; + +err_module_put: + module_put(framer->ops->owner); +err_put_device: + put_device(&framer->dev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(framer_get); + +/** + * framer_put() - release the framer + * @dev: device that wants to release this framer + * @framer: the framer returned by framer_get() + * + * Releases a refcount the caller received from framer_get(). + */ +void framer_put(struct device *dev, struct framer *framer) +{ + device_link_remove(dev, &framer->dev); + + module_put(framer->ops->owner); + put_device(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_put); + +static void devm_framer_put(struct device *dev, void *res) +{ + struct framer *framer = *(struct framer **)res; + + framer_put(dev, framer); +} + +/** + * devm_framer_get() - lookup and obtain a reference to a framer. + * @dev: device that requests this framer + * @con_id: name of the framer from device's point of view + * + * Gets the framer using framer_get(), and associates a device with it using + * devres. On driver detach, framer_put() function is invoked on the devres + * data, then, devres data is freed. + */ +struct framer *devm_framer_get(struct device *dev, const char *con_id) +{ + struct framer **ptr, *framer; + + ptr = devres_alloc(devm_framer_put, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer = framer_get(dev, con_id); + if (!IS_ERR(framer)) { + *ptr = framer; + devres_add(dev, ptr); + } else { + devres_free(ptr); + return framer; + } + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_get); + +/** + * devm_framer_optional_get() - lookup and obtain a reference to an optional + * framer. + * @dev: device that requests this framer + * @con_id: name of the framer from device's point of view + * + * Same as devm_framer_get() except that if the framer does not exist, it is not + * considered an error and -ENODEV will not be returned. Instead the NULL framer + * is returned. + */ +struct framer *devm_framer_optional_get(struct device *dev, const char *con_id) +{ + struct framer *framer = devm_framer_get(dev, con_id); + + if (PTR_ERR(framer) == -ENODEV) + framer = NULL; + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_optional_get); + +static void framer_notify_status_work(struct work_struct *work) +{ + struct framer *framer = container_of(work, struct framer, notify_status_work); + + blocking_notifier_call_chain(&framer->notifier_list, FRAMER_EVENT_STATUS, NULL); +} + +void framer_notify_status_change(struct framer *framer) +{ + /* Can be called from atomic context -> just schedule a task to call + * blocking notifiers + */ + queue_work(system_power_efficient_wq, &framer->notify_status_work); +} +EXPORT_SYMBOL_GPL(framer_notify_status_change); + +/** + * framer_create() - create a new framer + * @dev: device that is creating the new framer + * @node: device node of the framer. default to dev->of_node. + * @ops: function pointers for performing framer operations + * + * Called to create a framer using framer framework. + */ +struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + struct framer *framer; + int ret; + int id; + + /* get_status() is mandatory if the provider ask for polling status */ + if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status)) + return ERR_PTR(-EINVAL); + + framer = kzalloc(sizeof(*framer), GFP_KERNEL); + if (!framer) + return ERR_PTR(-ENOMEM); + + id = ida_alloc(&framer_ida, GFP_KERNEL); + if (id < 0) { + dev_err(dev, "unable to get id\n"); + ret = id; + goto free_framer; + } + + device_initialize(&framer->dev); + mutex_init(&framer->mutex); + INIT_WORK(&framer->notify_status_work, framer_notify_status_work); + INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work); + BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list); + + framer->dev.class = framer_class; + framer->dev.parent = dev; + framer->dev.of_node = node ? node : dev->of_node; + framer->id = id; + framer->ops = ops; + + ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id); + if (ret) + goto put_dev; + + /* framer-supply */ + framer->pwr = regulator_get_optional(&framer->dev, "framer"); + if (IS_ERR(framer->pwr)) { + ret = PTR_ERR(framer->pwr); + if (ret == -EPROBE_DEFER) + goto put_dev; + + framer->pwr = NULL; + } + + ret = device_add(&framer->dev); + if (ret) + goto put_dev; + + if (pm_runtime_enabled(dev)) { + pm_runtime_enable(&framer->dev); + pm_runtime_no_callbacks(&framer->dev); + } + + return framer; + +put_dev: + put_device(&framer->dev); /* calls framer_release() which frees resources */ + return ERR_PTR(ret); + +free_framer: + kfree(framer); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(framer_create); + +/** + * framer_destroy() - destroy the framer + * @framer: the framer to be destroyed + * + * Called to destroy the framer. + */ +void framer_destroy(struct framer *framer) +{ + /* polling_work should already be stopped but if framer_exit() was not + * called (bug), here it's the last time to do that ... + */ + cancel_delayed_work_sync(&framer->polling_work); + cancel_work_sync(&framer->notify_status_work); + pm_runtime_disable(&framer->dev); + device_unregister(&framer->dev); /* calls framer_release() which frees resources */ +} +EXPORT_SYMBOL_GPL(framer_destroy); + +static void devm_framer_destroy(struct device *dev, void *res) +{ + struct framer *framer = *(struct framer **)res; + + framer_destroy(framer); +} + +/** + * devm_framer_create() - create a new framer + * @dev: device that is creating the new framer + * @node: device node of the framer + * @ops: function pointers for performing framer operations + * + * Creates a new framer device adding it to the framer class. + * While at that, it also associates the device with the framer using devres. + * On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + struct framer **ptr, *framer; + + ptr = devres_alloc(devm_framer_destroy, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer = framer_create(dev, node, ops); + if (!IS_ERR(framer)) { + *ptr = framer; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_create); + +/** + * framer_provider_simple_of_xlate() - returns the framer instance from framer provider + * @dev: the framer provider device + * @args: of_phandle_args (not used here) + * + * Intended to be used by framer provider for the common case where #framer-cells is + * 0. For other cases where #framer-cells is greater than '0', the framer provider + * should provide a custom of_xlate function that reads the *args* and returns + * the appropriate framer. + */ +struct framer *framer_provider_simple_of_xlate(struct device *dev, struct of_phandle_args *args) +{ + struct class_dev_iter iter; + struct framer *framer; + + class_dev_iter_init(&iter, framer_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + framer = dev_to_framer(dev); + if (args->np != framer->dev.of_node) + continue; + + class_dev_iter_exit(&iter); + return framer; + } + + class_dev_iter_exit(&iter); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(framer_provider_simple_of_xlate); + +/** + * __framer_provider_of_register() - create/register framer provider with the framework + * @dev: struct device of the framer provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain framer instance from framer provider + * + * Creates struct framer_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the framer instance from + * framer provider. + */ +struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct framer_provider *framer_provider; + + framer_provider = kzalloc(sizeof(*framer_provider), GFP_KERNEL); + if (!framer_provider) + return ERR_PTR(-ENOMEM); + + framer_provider->dev = dev; + framer_provider->owner = owner; + framer_provider->of_xlate = of_xlate; + + of_node_get(framer_provider->dev->of_node); + + mutex_lock(&framer_provider_mutex); + list_add_tail(&framer_provider->list, &framer_provider_list); + mutex_unlock(&framer_provider_mutex); + + return framer_provider; +} +EXPORT_SYMBOL_GPL(__framer_provider_of_register); + +/** + * framer_provider_of_unregister() - unregister framer provider from the framework + * @framer_provider: framer provider returned by framer_provider_of_register() + * + * Removes the framer_provider created using framer_provider_of_register(). + */ +void framer_provider_of_unregister(struct framer_provider *framer_provider) +{ + mutex_lock(&framer_provider_mutex); + list_del(&framer_provider->list); + mutex_unlock(&framer_provider_mutex); + + of_node_put(framer_provider->dev->of_node); + kfree(framer_provider); +} +EXPORT_SYMBOL_GPL(framer_provider_of_unregister); + +static void devm_framer_provider_of_unregister(struct device *dev, void *res) +{ + struct framer_provider *framer_provider = *(struct framer_provider **)res; + + framer_provider_of_unregister(framer_provider); +} + +/** + * __devm_framer_provider_of_register() - create/register framer provider with + * the framework + * @dev: struct device of the framer provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain framer instance from framer provider + * + * Creates struct framer_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the framer instance from + * framer provider. While at that, it also associates the device with the + * framer provider using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + */ +struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct framer_provider **ptr, *framer_provider; + + ptr = devres_alloc(devm_framer_provider_of_unregister, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer_provider = __framer_provider_of_register(dev, owner, of_xlate); + if (!IS_ERR(framer_provider)) { + *ptr = framer_provider; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return framer_provider; +} +EXPORT_SYMBOL_GPL(__devm_framer_provider_of_register); + +/** + * framer_release() - release the framer + * @dev: the dev member within framer + * + * When the last reference to the device is removed, it is called + * from the embedded kobject as release method. + */ +static void framer_release(struct device *dev) +{ + struct framer *framer; + + framer = dev_to_framer(dev); + regulator_put(framer->pwr); + ida_free(&framer_ida, framer->id); + kfree(framer); +} + +static int __init framer_core_init(void) +{ + framer_class = class_create("framer"); + if (IS_ERR(framer_class)) { + pr_err("failed to create framer class (%pe)\n", framer_class); + return PTR_ERR(framer_class); + } + + framer_class->dev_release = framer_release; + + return 0; +} +device_initcall(framer_core_init); diff --git a/include/linux/framer/framer-provider.h b/include/linux/framer/framer-provider.h new file mode 100644 index 000000000000..782cd5fc83d5 --- /dev/null +++ b/include/linux/framer/framer-provider.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Generic framer profider header file + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ + +#ifndef __DRIVERS_PROVIDER_FRAMER_H +#define __DRIVERS_PROVIDER_FRAMER_H + +#include +#include +#include + +#define FRAMER_FLAG_POLL_STATUS BIT(0) + +/** + * struct framer_ops - set of function pointers for performing framer operations + * @init: operation to be performed for initializing the framer + * @exit: operation to be performed while exiting + * @power_on: powering on the framer + * @power_off: powering off the framer + * @flags: OR-ed flags (FRAMER_FLAG_*) to ask for core functionality + * - @FRAMER_FLAG_POLL_STATUS: + * Ask the core to perform a polling to get the framer status and + * notify consumers on change. + * The framer should call @framer_notify_status_change() when it + * detects a status change. This is usually done using interrupts. + * If the framer cannot detect this change, it can ask the core for + * a status polling. The core will call @get_status() periodically + * and, on change detected, it will notify the consumer. + * the @get_status() + * @owner: the module owner containing the ops + */ +struct framer_ops { + int (*init)(struct framer *framer); + void (*exit)(struct framer *framer); + int (*power_on)(struct framer *framer); + int (*power_off)(struct framer *framer); + + /** + * @get_status: + * + * Optional. + * + * Used to get the framer status. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*get_status)(struct framer *framer, struct framer_status *status); + + /** + * @set_config: + * + * Optional. + * + * Used to set the framer configuration. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*set_config)(struct framer *framer, const struct framer_config *config); + + /** + * @get_config: + * + * Optional. + * + * Used to get the framer configuration. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*get_config)(struct framer *framer, struct framer_config *config); + + u32 flags; + struct module *owner; +}; + +/** + * struct framer_provider - represents the framer provider + * @dev: framer provider device + * @children: can be used to override the default (dev->of_node) child node + * @owner: the module owner having of_xlate + * @list: to maintain a linked list of framer providers + * @of_xlate: function pointer to obtain framer instance from framer pointer + */ +struct framer_provider { + struct device *dev; + struct module *owner; + struct list_head list; + struct framer * (*of_xlate)(struct device *dev, + struct of_phandle_args *args); +}; + +static inline void framer_set_drvdata(struct framer *framer, void *data) +{ + dev_set_drvdata(&framer->dev, data); +} + +static inline void *framer_get_drvdata(struct framer *framer) +{ + return dev_get_drvdata(&framer->dev); +} + +#if IS_ENABLED(CONFIG_GENERIC_FRAMER) + +/* Create and destroy a framer */ +struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops); +void framer_destroy(struct framer *framer); + +/* devm version */ +struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops); + +struct framer *framer_provider_simple_of_xlate(struct device *dev, + struct of_phandle_args *args); + +struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)); + +void framer_provider_of_unregister(struct framer_provider *framer_provider); + +struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)); + +void framer_notify_status_change(struct framer *framer); + +#else /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */ + +static inline struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void framer_destroy(struct framer *framer) +{ +} + +/* devm version */ +static inline struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer *framer_provider_simple_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_provider_of_unregister(struct framer_provider *framer_provider) +{ +} + +static inline struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_notify_status_change(struct framer *framer) +{ +} + +#endif /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */ + +#define framer_provider_of_register(dev, xlate) \ + __framer_provider_of_register((dev), THIS_MODULE, (xlate)) + +#define devm_framer_provider_of_register(dev, xlate) \ + __devm_framer_provider_of_register((dev), THIS_MODULE, (xlate)) + +#endif /* __DRIVERS_PROVIDER_FRAMER_H */ diff --git a/include/linux/framer/framer.h b/include/linux/framer/framer.h new file mode 100644 index 000000000000..9a9b88962c29 --- /dev/null +++ b/include/linux/framer/framer.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Generic framer header file + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ + +#ifndef __DRIVERS_FRAMER_H +#define __DRIVERS_FRAMER_H + +#include +#include +#include +#include +#include +#include + +/** + * enum framer_iface - Framer interface + * @FRAMER_IFACE_E1: E1 interface + * @FRAMER_IFACE_T1: T1 interface + */ +enum framer_iface { + FRAMER_IFACE_E1, + FRAMER_IFACE_T1, +}; + +/** + * enum framer_clock_type - Framer clock type + * @FRAMER_CLOCK_EXT: External clock + * @FRAMER_CLOCK_INT: Internal clock + */ +enum framer_clock_type { + FRAMER_CLOCK_EXT, + FRAMER_CLOCK_INT, +}; + +/** + * struct framer_config - Framer configuration + * @iface: Framer line interface + * @clock_type: Framer clock type + * @line_clock_rate: Framer line clock rate + */ +struct framer_config { + enum framer_iface iface; + enum framer_clock_type clock_type; + unsigned long line_clock_rate; +}; + +/** + * struct framer_status - Framer status + * @link_is_on: Framer link state. true, the link is on, false, the link is off. + */ +struct framer_status { + bool link_is_on; +}; + +/** + * enum framer_event - Event available for notification + * @FRAMER_EVENT_STATUS: Event notified on framer_status changes + */ +enum framer_event { + FRAMER_EVENT_STATUS, +}; + +/** + * struct framer - represents the framer device + * @dev: framer device + * @id: id of the framer device + * @ops: function pointers for performing framer operations + * @mutex: mutex to protect framer_ops + * @init_count: used to protect when the framer is used by multiple consumers + * @power_count: used to protect when the framer is used by multiple consumers + * @pwr: power regulator associated with the framer + * @notify_status_work: work structure used for status notifications + * @notifier_list: notifier list used for notifications + * @polling_work: delayed work structure used for the polling task + * @prev_status: previous read status used by the polling task to detect changes + */ +struct framer { + struct device dev; + int id; + const struct framer_ops *ops; + struct mutex mutex; /* Protect framer */ + int init_count; + int power_count; + struct regulator *pwr; + struct work_struct notify_status_work; + struct blocking_notifier_head notifier_list; + struct delayed_work polling_work; + struct framer_status prev_status; +}; + +#if IS_ENABLED(CONFIG_GENERIC_FRAMER) +int framer_pm_runtime_get(struct framer *framer); +int framer_pm_runtime_get_sync(struct framer *framer); +int framer_pm_runtime_put(struct framer *framer); +int framer_pm_runtime_put_sync(struct framer *framer); +int framer_init(struct framer *framer); +int framer_exit(struct framer *framer); +int framer_power_on(struct framer *framer); +int framer_power_off(struct framer *framer); +int framer_get_status(struct framer *framer, struct framer_status *status); +int framer_get_config(struct framer *framer, struct framer_config *config); +int framer_set_config(struct framer *framer, const struct framer_config *config); +int framer_notifier_register(struct framer *framer, struct notifier_block *nb); +int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb); + +struct framer *framer_get(struct device *dev, const char *con_id); +void framer_put(struct device *dev, struct framer *framer); + +struct framer *devm_framer_get(struct device *dev, const char *con_id); +struct framer *devm_framer_optional_get(struct device *dev, const char *con_id); +#else +static inline int framer_pm_runtime_get(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_get_sync(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_put(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_put_sync(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_init(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_exit(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_power_on(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_power_off(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_get_status(struct framer *framer, struct framer_status *status) +{ + return -ENOSYS; +} + +static inline int framer_get_config(struct framer *framer, struct framer_config *config) +{ + return -ENOSYS; +} + +static inline int framer_set_config(struct framer *framer, const struct framer_config *config) +{ + return -ENOSYS; +} + +static inline int framer_notifier_register(struct framer *framer, + struct notifier_block *nb) +{ + return -ENOSYS; +} + +static inline int framer_notifier_unregister(struct framer *framer, + struct notifier_block *nb) +{ + return -ENOSYS; +} + +struct framer *framer_get(struct device *dev, const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_put(struct device *dev, struct framer *framer) +{ +} + +static inline struct framer *devm_framer_get(struct device *dev, const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer *devm_framer_optional_get(struct device *dev, const char *con_id) +{ + return NULL; +} + +#endif + +#endif /* __DRIVERS_FRAMER_H */ From patchwork Tue Nov 28 13:25:31 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13471142 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="Qr0NjEMM" Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C8ADB10D7; Tue, 28 Nov 2023 05:25:41 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPA id 9F59A6000B; Tue, 28 Nov 2023 13:25:39 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1701177940; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=psebKNsdqvnIQUttY1jWFp3xKW3lCnuxbNEJnK1Je/k=; b=Qr0NjEMMNYTl2PtLGDw+zeqbPV5V2Lvh1UdE+jKgtj9Clvrp1rgxLkVHyQ0qDJQmcPi7ge so8FzaKcUQsSCp+mzUm/xvjU2/w2h/0ZHXZIHnpOu6YRTzAysbIuBhdBRSxEU+NZ/PbvIZ dlrroG3MK+ngKnh7Z+SqkZYSCBmdzaTD8H/18//5P9bczVH8x7j2rPbXaK6f0dvfKh5FKK wF1CqeXV/fkXXsKVPQJpEuTuAfLs96S044O2U0yvaXesreVC8Odf5KjWNMGy6ylknQAyy+ GGfXGOU3yy9p25sAoNzBweFmWirTGIh89ggQe9S/9Y7SSF+lCgn/O0nWLIpkKA== From: Herve Codina To: Herve Codina , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Andrew Lunn , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Linus Walleij , Liam Girdwood , Mark Brown Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Christophe Leroy , Thomas Petazzoni , Rob Herring Subject: [PATCH 2/5] dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer Date: Tue, 28 Nov 2023 14:25:31 +0100 Message-ID: <20231128132534.258459-3-herve.codina@bootlin.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231128132534.258459-1-herve.codina@bootlin.com> References: <20231128132534.258459-1-herve.codina@bootlin.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: herve.codina@bootlin.com X-Patchwork-Delegate: kuba@kernel.org The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. Signed-off-by: Herve Codina Reviewed-by: Christophe Leroy Reviewed-by: Rob Herring --- .../bindings/net/lantiq,pef2256.yaml | 213 ++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/lantiq,pef2256.yaml diff --git a/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml new file mode 100644 index 000000000000..7da8370e2468 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq PEF2256 + +maintainers: + - Herve Codina + +description: + The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and + line interface component designed to fulfill all required interfacing between + an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. + +properties: + compatible: + items: + - const: lantiq,pef2256 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master Clock + - description: System Clock Receive + - description: System Clock Transmit + + clock-names: + items: + - const: mclk + - const: sclkr + - const: sclkx + + interrupts: + maxItems: 1 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + patternProperties: + '-pins$': + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ] + + function: + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS, + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT, + GPI, GPOH, GPOL ] + + required: + - pins + - function + + lantiq,data-rate-bps: + enum: [2048000, 4096000, 8192000, 16384000] + default: 2048000 + description: + Data rate (bit per seconds) on the system highway. + + lantiq,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + lantiq,channel-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit + time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000 + bit/s, the data (all 32 8-bit) present in the frame are interleave with + unused time-slots. The lantiq,channel-phase property allows to set the + correct alignment of the interleave mechanism. + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and + lantiq,channel-phase = 2, the interleave schema with unused time-slots + (nu) and used time-slots (XX) for TSi is + nu nu XX nu nu nu XX nu nu nu XX nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the + interleave schema is + nu XX nu nu nu XX nu nu nu XX nu nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and + lantiq,channel-phase = 1, the interleave schema is + nu XX nu XX nu XX + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + +patternProperties: + '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$': + type: object + $ref: /schemas/sound/dai-common.yaml + unevaluatedProperties: false + description: + Codec provided by the pef2256. This codec allows to use some of the PCM + system highway time-slots as audio channels to transport audio data over + the E1/T1/J1 lines. + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the sound card node for + sub-nodes that involve the codec. The codec uses 8-bit time-slots. + 'dai-tdm-tdm-slot-with' must be set to 8. + The tx and rx masks define the pef2256 time-slots assigned to the codec. + + properties: + compatible: + const: lantiq,pef2256-codec + + '#sound-dai-cells': + const: 0 + + required: + - compatible + - '#sound-dai-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + + pef2256: framer@2000000 { + compatible = "lantiq,pef2256"; + reg = <0x2000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&intc>; + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>; + clock-names = "mclk", "sclkr", "sclkx"; + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + lantiq,data-rate-bps = <4096000>; + + pinctrl { + pef2256_rpa_sypr: rpa-pins { + pins = "RPA"; + function = "SYPR"; + }; + pef2256_xpa_sypx: xpa-pins { + pins = "XPA"; + function = "SYPX"; + }; + }; + + pef2256_codec0: codec-0 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_0"; + }; + + pef2256_codec1: codec-1 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */ + reg = <0>; + cpu { + sound-dai = <&cpu_dai1>; + }; + codec { + sound-dai = <&pef2256_codec0>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 1, 2, 3, 4 */ + dai-tdm-slot-tx-mask = <0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 1 1 1 1>; + }; + }; + simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */ + reg = <1>; + cpu { + sound-dai = <&cpu_dai2>; + }; + codec { + sound-dai = <&pef2256_codec1>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 5, 6, 7, 8 */ + dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>; + }; + }; + }; From patchwork Tue Nov 28 13:25:32 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13471146 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="brWmS8Kk" Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D7E0C10DC; Tue, 28 Nov 2023 05:25:42 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPA id ACE0F6000A; Tue, 28 Nov 2023 13:25:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1701177941; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=348tsoAj0beBYL7sp+zp5PGhXipyRS0wt+ukTG8ipPU=; b=brWmS8KkSBtbdhsYJr+mVc8XmrdaGONy+l/tvLqutVIu2iuOmltllWuk+5eobhvpuKeDzC F4zYcNxAIJIOGxMzSm+QWJgJOWlDaROPcVAuRaABJjWi3P7cctGmctFyscv5JzKpQR5p5q fdZAf9sJ2saG5FWnOsBjHPPJ1Txt4X7F2ZSob34ji38C1TxB3bLmlURFn1H90alG0/zooY MMZoWNS9/doBteOh0YNJXcGJ62WN8RSMhS12A8tdzdzZujwQgwTcSyR3ecf1H76uDYSjh1 bJWPi3aLOfRZUyYV57MpwIDq+BpGqV6+CtrmDMXQr6VIfxPt/ObOb46NrKTY2Q== From: Herve Codina To: Herve Codina , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Andrew Lunn , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Linus Walleij , Liam Girdwood , Mark Brown Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Christophe Leroy , Thomas Petazzoni Subject: [PATCH 3/5] net: wan: framer: Add support for the Lantiq PEF2256 framer Date: Tue, 28 Nov 2023 14:25:32 +0100 Message-ID: <20231128132534.258459-4-herve.codina@bootlin.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231128132534.258459-1-herve.codina@bootlin.com> References: <20231128132534.258459-1-herve.codina@bootlin.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: herve.codina@bootlin.com X-Patchwork-Delegate: kuba@kernel.org The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. Signed-off-by: Herve Codina Reviewed-by: Christophe Leroy Reviewed-by: Linus Walleij Acked-by: Jakub Kicinski --- drivers/net/wan/framer/Kconfig | 17 + drivers/net/wan/framer/Makefile | 1 + drivers/net/wan/framer/pef2256/Makefile | 8 + drivers/net/wan/framer/pef2256/pef2256-regs.h | 250 +++++ drivers/net/wan/framer/pef2256/pef2256.c | 880 ++++++++++++++++++ include/linux/framer/pef2256.h | 31 + 6 files changed, 1187 insertions(+) create mode 100644 drivers/net/wan/framer/pef2256/Makefile create mode 100644 drivers/net/wan/framer/pef2256/pef2256-regs.h create mode 100644 drivers/net/wan/framer/pef2256/pef2256.c create mode 100644 include/linux/framer/pef2256.h diff --git a/drivers/net/wan/framer/Kconfig b/drivers/net/wan/framer/Kconfig index 57fe7ba6aa37..dc83caef9485 100644 --- a/drivers/net/wan/framer/Kconfig +++ b/drivers/net/wan/framer/Kconfig @@ -22,4 +22,21 @@ if FRAMER config GENERIC_FRAMER bool +config FRAMER_PEF2256 + tristate "Lantiq PEF2256" + depends on OF + depends on HAS_IOMEM + select GENERIC_FRAMER + select MFD_CORE + select REGMAP_MMIO + help + Enable support for the Lantiq PEF2256 (FALC56) framer. + The PEF2256 is a framer and line interface between analog E1/T1/J1 + line and a digital PCM bus. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called framer-pef2256. + endif # FRAMER diff --git a/drivers/net/wan/framer/Makefile b/drivers/net/wan/framer/Makefile index 78dbd8e563d0..3403f2b14534 100644 --- a/drivers/net/wan/framer/Makefile +++ b/drivers/net/wan/framer/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_GENERIC_FRAMER) += framer-core.o +obj-$(CONFIG_FRAMER_PEF2256) += pef2256/ diff --git a/drivers/net/wan/framer/pef2256/Makefile b/drivers/net/wan/framer/pef2256/Makefile new file mode 100644 index 000000000000..f4d1208dd8a4 --- /dev/null +++ b/drivers/net/wan/framer/pef2256/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the pef2256 driver. +# + +obj-$(CONFIG_FRAMER_PEF2256) += framer-pef2256.o + +framer-pef2256-objs := pef2256.o diff --git a/drivers/net/wan/framer/pef2256/pef2256-regs.h b/drivers/net/wan/framer/pef2256/pef2256-regs.h new file mode 100644 index 000000000000..5d3183c91714 --- /dev/null +++ b/drivers/net/wan/framer/pef2256/pef2256-regs.h @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PEF2256 registers definition + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ +#ifndef __PEF2256_REGS_H__ +#define __PEF2256_REGS_H__ + +#include "linux/bitfield.h" + +/* Command Register */ +#define PEF2256_CMDR 0x02 +#define PEF2256_CMDR_RRES BIT(6) +#define PEF2256_CMDR_XRES BIT(4) +#define PEF2256_CMDR_SRES BIT(0) + +/* Interrupt Mask Register 0..5 */ +#define PEF2256_IMR0 0x14 +#define PEF2256_IMR1 0x15 +#define PEF2256_IMR2 0x16 +#define PEF2256_IMR3 0x17 +#define PEF2256_IMR4 0x18 +#define PEF2256_IMR5 0x19 + +/* Framer Mode Register 0 */ +#define PEF2256_FMR0 0x1C +#define PEF2256_FMR0_XC_MASK GENMASK(7, 6) +#define PEF2256_FMR0_XC_NRZ FIELD_PREP_CONST(PEF2256_FMR0_XC_MASK, 0x0) +#define PEF2256_FMR0_XC_CMI FIELD_PREP_CONST(PEF2256_FMR0_XC_MASK, 0x1) +#define PEF2256_FMR0_XC_AMI FIELD_PREP_CONST(PEF2256_FMR0_XC_MASK, 0x2) +#define PEF2256_FMR0_XC_HDB3 FIELD_PREP_CONST(PEF2256_FMR0_XC_MASK, 0x3) +#define PEF2256_FMR0_RC_MASK GENMASK(5, 4) +#define PEF2256_FMR0_RC_NRZ FIELD_PREP_CONST(PEF2256_FMR0_RC_MASK, 0x0) +#define PEF2256_FMR0_RC_CMI FIELD_PREP_CONST(PEF2256_FMR0_RC_MASK, 0x1) +#define PEF2256_FMR0_RC_AMI FIELD_PREP_CONST(PEF2256_FMR0_RC_MASK, 0x2) +#define PEF2256_FMR0_RC_HDB3 FIELD_PREP_CONST(PEF2256_FMR0_RC_MASK, 0x3) + +/* Framer Mode Register 1 */ +#define PEF2256_FMR1 0x1D +#define PEF2256_FMR1_XFS BIT(3) +#define PEF2256_FMR1_ECM BIT(2) +/* SSD is defined on 2 bits. The other bit is on SIC1 register */ +#define PEF2256_FMR1_SSD_MASK GENMASK(1, 1) +#define PEF2256_FMR1_SSD_2048 FIELD_PREP_CONST(PEF2256_FMR1_SSD_MASK, 0x0) +#define PEF2256_FMR1_SSD_4096 FIELD_PREP_CONST(PEF2256_FMR1_SSD_MASK, 0x1) +#define PEF2256_FMR1_SSD_8192 FIELD_PREP_CONST(PEF2256_FMR1_SSD_MASK, 0x0) +#define PEF2256_FMR1_SSD_16384 FIELD_PREP_CONST(PEF2256_FMR1_SSD_MASK, 0x1) + +/* Framer Mode Register 2 */ +#define PEF2256_FMR2 0x1E +#define PEF2256_FMR2_RFS_MASK GENMASK(7, 6) +#define PEF2256_FMR2_RFS_DOUBLEFRAME FIELD_PREP_CONST(PEF2256_FMR2_RFS_MASK, 0x0) +#define PEF2256_FMR2_RFS_CRC4_MULTIFRAME FIELD_PREP_CONST(PEF2256_FMR2_RFS_MASK, 0x2) +#define PEF2256_FMR2_RFS_AUTO_MULTIFRAME FIELD_PREP_CONST(PEF2256_FMR2_RFS_MASK, 0x3) +#define PEF2256_FMR2_AXRA BIT(1) + +/* Transmit Service Word */ +#define PEF2256_XSW 0x20 +#define PEF2256_XSW_XSIS BIT(7) +#define PEF2256_XSW_XTM BIT(6) +#define PEF2256_XSW_XY_MASK GENMASK(5, 0) +#define PEF2256_XSW_XY(_v) FIELD_PREP(PEF2256_XSW_XY_MASK, _v) + +/* Transmit Spare Bits */ +#define PEF2256_XSP 0x21 +#define PEF2256_XSP_XSIF BIT(2) + +/* Transmit Control 0..1 */ +#define PEF2256_XC0 0x22 +#define PEF2256_XC1 0x23 + +/* Receive Control 0 */ +#define PEF2256_RC0 0x24 +#define PEF2256_RC0_SWD BIT(7) +#define PEF2256_RC0_ASY4 BIT(6) + +/* Receive Control 1 */ +#define PEF2256_RC1 0x25 + +/* Transmit Pulse Mask 0..1 */ +#define PEF2256_XPM0 0x26 +#define PEF2256_XPM1 0x27 + +/* Transmit Pulse Mask 2 */ +#define PEF2256_XPM2 0x28 +#define PEF2256_XPM2_XLT BIT(6) + +/* Transparent Service Word Mask */ +#define PEF2256_TSWM 0x29 + +/* Line Interface Mode 0 */ +#define PEF2256_LIM0 0x36 +#define PEF2256_2X_LIM0_BIT3 BIT(3) /* v2.x, described as a forced '1' bit */ +#define PEF2256_LIM0_MAS BIT(0) + +/* Line Interface Mode 1 */ +#define PEF2256_LIM1 0x37 +#define PEF2256_12_LIM1_RIL_MASK GENMASK(6, 4) +#define PEF2256_12_LIM1_RIL_910 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x0) +#define PEF2256_12_LIM1_RIL_740 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x1) +#define PEF2256_12_LIM1_RIL_590 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x2) +#define PEF2256_12_LIM1_RIL_420 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x3) +#define PEF2256_12_LIM1_RIL_320 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x4) +#define PEF2256_12_LIM1_RIL_210 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x5) +#define PEF2256_12_LIM1_RIL_160 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x6) +#define PEF2256_12_LIM1_RIL_100 FIELD_PREP_CONST(PEF2256_12_LIM1_RIL_MASK, 0x7) +#define PEF2256_2X_LIM1_RIL_MASK GENMASK(6, 4) +#define PEF2256_2X_LIM1_RIL_2250 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x0) +#define PEF2256_2X_LIM1_RIL_1100 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x1) +#define PEF2256_2X_LIM1_RIL_600 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x2) +#define PEF2256_2X_LIM1_RIL_350 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x3) +#define PEF2256_2X_LIM1_RIL_210 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x4) +#define PEF2256_2X_LIM1_RIL_140 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x5) +#define PEF2256_2X_LIM1_RIL_100 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x6) +#define PEF2256_2X_LIM1_RIL_50 FIELD_PREP_CONST(PEF2256_2X_LIM1_RIL_MASK, 0x7) + +/* Pulse Count Detection */ +#define PEF2256_PCD 0x38 + + /* Pulse Count Recovery */ +#define PEF2256_PCR 0x39 + + /* Line Interface Mode 2 */ +#define PEF2256_LIM2 0x3A +#define PEF2256_LIM2_SLT_MASK GENMASK(5, 4) +#define PEF2256_LIM2_SLT_THR55 FIELD_PREP_CONST(PEF2256_LIM2_SLT_MASK, 0x0) +#define PEF2256_LIM2_SLT_THR67 FIELD_PREP_CONST(PEF2256_LIM2_SLT_MASK, 0x1) +#define PEF2256_LIM2_SLT_THR50 FIELD_PREP_CONST(PEF2256_LIM2_SLT_MASK, 0x2) +#define PEF2256_LIM2_SLT_THR45 FIELD_PREP_CONST(PEF2256_LIM2_SLT_MASK, 0x3) +#define PEF2256_LIM2_ELT BIT(2) + +/* System Interface Control 1 */ +#define PEF2256_SIC1 0x3E +#define PEF2256_SIC1_SSC_MASK (BIT(7) | BIT(3)) +#define PEF2256_SIC1_SSC_2048 (0) +#define PEF2256_SIC1_SSC_4096 BIT(3) +#define PEF2256_SIC1_SSC_8192 BIT(7) +#define PEF2256_SIC1_SSC_16384 (BIT(7) | BIT(3)) +/* SSD is defined on 2 bits. The other bit is on FMR1 register */ +#define PEF2256_SIC1_SSD_MASK GENMASK(6, 6) +#define PEF2256_SIC1_SSD_2048 FIELD_PREP_CONST(PEF2256_SIC1_SSD_MASK, 0x0) +#define PEF2256_SIC1_SSD_4096 FIELD_PREP_CONST(PEF2256_SIC1_SSD_MASK, 0x0) +#define PEF2256_SIC1_SSD_8192 FIELD_PREP_CONST(PEF2256_SIC1_SSD_MASK, 0x1) +#define PEF2256_SIC1_SSD_16384 FIELD_PREP_CONST(PEF2256_SIC1_SSD_MASK, 0x1) +#define PEF2256_SIC1_RBS_MASK GENMASK(5, 4) +#define PEF2256_SIC1_RBS_2FRAMES FIELD_PREP_CONST(PEF2256_SIC1_RBS_MASK, 0x0) +#define PEF2256_SIC1_RBS_1FRAME FIELD_PREP_CONST(PEF2256_SIC1_RBS_MASK, 0x1) +#define PEF2256_SIC1_RBS_96BITS FIELD_PREP_CONST(PEF2256_SIC1_RBS_MASK, 0x2) +#define PEF2256_SIC1_RBS_BYPASS FIELD_PREP_CONST(PEF2256_SIC1_RBS_MASK, 0x3) +#define PEF2256_SIC1_XBS_MASK GENMASK(1, 0) +#define PEF2256_SIC1_XBS_BYPASS FIELD_PREP_CONST(PEF2256_SIC1_XBS_MASK, 0x0) +#define PEF2256_SIC1_XBS_1FRAME FIELD_PREP_CONST(PEF2256_SIC1_XBS_MASK, 0x1) +#define PEF2256_SIC1_XBS_2FRAMES FIELD_PREP_CONST(PEF2256_SIC1_XBS_MASK, 0x2) +#define PEF2256_SIC1_XBS_96BITS FIELD_PREP_CONST(PEF2256_SIC1_XBS_MASK, 0x3) + +/* System Interface Control 2 */ +#define PEF2256_SIC2 0x3F +#define PEF2256_SIC2_SICS_MASK GENMASK(3, 1) +#define PEF2256_SIC2_SICS(_v) FIELD_PREP(PEF2256_SIC2_SICS_MASK, _v) + +/* System Interface Control 3 */ +#define PEF2256_SIC3 0x40 +#define PEF2256_SIC3_RTRI BIT(5) +#define PEF2256_SIC3_RESX BIT(3) +#define PEF2256_SIC3_RESR BIT(2) + +/* Clock Mode Register 1 */ +#define PEF2256_CMR1 0x44 +#define PEF2256_CMR1_RS_MASK GENMASK(5, 4) +#define PEF2256_CMR1_RS_DPLL FIELD_PREP_CONST(PEF2256_CMR1_RS_MASK, 0x0) +#define PEF2256_CMR1_RS_DPLL_LOS_HIGH FIELD_PREP_CONST(PEF2256_CMR1_RS_MASK, 0x1) +#define PEF2256_CMR1_RS_DCOR_2048 FIELD_PREP_CONST(PEF2256_CMR1_RS_MASK, 0x2) +#define PEF2256_CMR1_RS_DCOR_8192 FIELD_PREP_CONST(PEF2256_CMR1_RS_MASK, 0x3) +#define PEF2256_CMR1_DCS BIT(3) + +/* Clock Mode Register 2 */ +#define PEF2256_CMR2 0x45 +#define PEF2256_CMR2_DCOXC BIT(5) + +/* Global Configuration Register */ +#define PEF2256_GCR 0x46 +#define PEF2256_GCR_SCI BIT(6) +#define PEF2256_GCR_ECMC BIT(4) + +/* Port Configuration 5 */ +#define PEF2256_PC5 0x84 +#define PEF2256_PC5_CRP BIT(0) + +/* Global Port Configuration 1 */ +#define PEF2256_GPC1 0x85 +#define PEF2256_GPC1_CSFP_MASK GENMASK(7, 5) +#define PEF2256_GPC1_CSFP_SEC_IN_HIGH FIELD_PREP_CONST(PEF2256_GPC1_CSFP_MASK, 0x0) +#define PEF2256_GPC1_CSFP_SEC_OUT_HIGH FIELD_PREP_CONST(PEF2256_GPC1_CSFP_MASK, 0x1) +#define PEF2256_GPC1_CSFP_FSC_OUT_HIGH FIELD_PREP_CONST(PEF2256_GPC1_CSFP_MASK, 0x2) +#define PEF2256_GPC1_CSFP_FSC_OUT_LOW FIELD_PREP_CONST(PEF2256_GPC1_CSFP_MASK, 0x3) + +/* Port Configuration 6 */ +#define PEF2256_PC6 0x86 + +/* Global Counter Mode n=1..8 */ +#define PEF2256_GCM(_n) (0x92 + (_n) - 1) +#define PEF2256_GCM1 0x92 +#define PEF2256_GCM2 0x93 +#define PEF2256_GCM3 0x94 +#define PEF2256_GCM4 0x95 +#define PEF2256_GCM5 0x96 +#define PEF2256_GCM6 0x97 +#define PEF2256_GCM7 0x98 +#define PEF2256_GCM8 0x99 + +/* Version Status Register */ +#define PEF2256_VSTR 0x4A +#define PEF2256_VSTR_VERSION_12 0x00 +#define PEF2256_VSTR_VERSION_21 0x10 +#define PEF2256_VSTR_VERSION_2x 0x05 + +/* Framer Receive Status 0 */ +#define PEF2256_FRS0 0x4C +#define PEF2256_FRS0_LOS BIT(7) +#define PEF2256_FRS0_AIS BIT(6) + +/* Interrupt Status Register 0..5 */ +#define PEF2256_ISR(_n) (0x68 + (_n)) +#define PEF2256_ISR0 0x68 +#define PEF2256_ISR1 0x69 +#define PEF2256_ISR2 0x6A +#define PEF2256_ISR3 0x6B +#define PEF2256_ISR4 0x6C +#define PEF2256_ISR5 0x6D + +/* Global Interrupt Status */ +#define PEF2256_GIS 0x6E +#define PEF2256_GIS_ISR(_n) BIT(_n) + +/* Wafer Identification Register */ +#define PEF2256_WID 0xEC +#define PEF2256_12_WID_MASK GENMASK(1, 0) +#define PEF2256_12_WID_VERSION_12 FIELD_PREP_CONST(PEF2256_12_WID_MASK, 0x3) +#define PEF2256_2X_WID_MASK GENMASK(7, 6) +#define PEF2256_2X_WID_VERSION_21 FIELD_PREP_CONST(PEF2256_2X_WID_MASK, 0x0) +#define PEF2256_2X_WID_VERSION_22 FIELD_PREP_CONST(PEF2256_2X_WID_MASK, 0x1) + +/* IMR2/ISR2 Interrupts common bits */ +#define PEF2256_INT2_AIS BIT(3) +#define PEF2256_INT2_LOS BIT(2) + +#endif /* __PEF2256_REGS_H__ */ diff --git a/drivers/net/wan/framer/pef2256/pef2256.c b/drivers/net/wan/framer/pef2256/pef2256.c new file mode 100644 index 000000000000..4f81053ee4f0 --- /dev/null +++ b/drivers/net/wan/framer/pef2256/pef2256.c @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PEF2256 also known as FALC56 driver + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pef2256-regs.h" + +enum pef2256_frame_type { + PEF2256_FRAME_E1_DOUBLEFRAME, + PEF2256_FRAME_E1_CRC4_MULTIFRAME, + PEF2256_FRAME_E1_AUTO_MULTIFRAME, + PEF2256_FRAME_T1J1_4FRAME, + PEF2256_FRAME_T1J1_12FRAME, + PEF2256_FRAME_T1J1_24FRAME, + PEF2256_FRAME_T1J1_72FRAME, +}; + +struct pef2256 { + struct device *dev; + struct regmap *regmap; + enum pef2256_version version; + struct clk *mclk; + struct clk *sclkr; + struct clk *sclkx; + struct gpio_desc *reset_gpio; + unsigned long sysclk_rate; + u32 data_rate; + bool is_tx_falling_edge; + bool is_subordinate; + enum pef2256_frame_type frame_type; + u8 channel_phase; + atomic_t carrier; + struct framer *framer; +}; + +static u8 pef2256_read8(struct pef2256 *pef2256, int offset) +{ + int val; + + regmap_read(pef2256->regmap, offset, &val); + return val; +} + +static void pef2256_write8(struct pef2256 *pef2256, int offset, u8 val) +{ + regmap_write(pef2256->regmap, offset, val); +} + +static void pef2256_clrbits8(struct pef2256 *pef2256, int offset, u8 clr) +{ + regmap_clear_bits(pef2256->regmap, offset, clr); +} + +static void pef2256_setbits8(struct pef2256 *pef2256, int offset, u8 set) +{ + regmap_set_bits(pef2256->regmap, offset, set); +} + +static void pef2256_clrsetbits8(struct pef2256 *pef2256, int offset, u8 clr, u8 set) +{ + regmap_update_bits(pef2256->regmap, offset, clr | set, set); +} + +enum pef2256_version pef2256_get_version(struct pef2256 *pef2256) +{ + enum pef2256_version version = PEF2256_VERSION_UNKNOWN; + u8 vstr, wid; + + vstr = pef2256_read8(pef2256, PEF2256_VSTR); + wid = pef2256_read8(pef2256, PEF2256_WID); + + switch (vstr) { + case PEF2256_VSTR_VERSION_12: + if ((wid & PEF2256_12_WID_MASK) == PEF2256_12_WID_VERSION_12) + version = PEF2256_VERSION_1_2; + break; + case PEF2256_VSTR_VERSION_2x: + switch (wid & PEF2256_2X_WID_MASK) { + case PEF2256_2X_WID_VERSION_21: + version = PEF2256_VERSION_2_1; + break; + case PEF2256_2X_WID_VERSION_22: + version = PEF2256_VERSION_2_2; + break; + } + break; + case PEF2256_VSTR_VERSION_21: + version = PEF2256_VERSION_2_1; + break; + } + + if (version == PEF2256_VERSION_UNKNOWN) + dev_err(pef2256->dev, "Unknown version (0x%02x, 0x%02x)\n", vstr, wid); + + return version; +} +EXPORT_SYMBOL_GPL(pef2256_get_version); + +enum pef2256_gcm_config_item { + PEF2256_GCM_CONFIG_1544000 = 0, + PEF2256_GCM_CONFIG_2048000, + PEF2256_GCM_CONFIG_8192000, + PEF2256_GCM_CONFIG_10000000, + PEF2256_GCM_CONFIG_12352000, + PEF2256_GCM_CONFIG_16384000, +}; + +struct pef2256_gcm_config { + u8 gcm_12[6]; + u8 gcm_2x[8]; +}; + +static const struct pef2256_gcm_config pef2256_gcm_configs[] = { + [PEF2256_GCM_CONFIG_1544000] = { + .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x00, 0x15}, + .gcm_2x = {0x00, 0x15, 0x00, 0x08, 0x00, 0x3F, 0x9C, 0xDF}, + }, + [PEF2256_GCM_CONFIG_2048000] = { + .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x00, 0x10}, + .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x2F, 0xDB, 0xDF}, + }, + [PEF2256_GCM_CONFIG_8192000] = { + .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x03, 0x10}, + .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x0B, 0xDB, 0xDF}, + }, + [PEF2256_GCM_CONFIG_10000000] = { + .gcm_12 = {0x90, 0x51, 0x81, 0x8F, 0x04, 0x10}, + .gcm_2x = {0x40, 0x1B, 0x3D, 0x0A, 0x00, 0x07, 0xC9, 0xDC}, + }, + [PEF2256_GCM_CONFIG_12352000] = { + .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x07, 0x15}, + .gcm_2x = {0x00, 0x19, 0x00, 0x08, 0x01, 0x0A, 0x98, 0xDA}, + }, + [PEF2256_GCM_CONFIG_16384000] = { + .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x07, 0x10}, + .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x01, 0x0B, 0xDB, 0xDF}, + }, +}; + +static int pef2256_setup_gcm(struct pef2256 *pef2256) +{ + enum pef2256_gcm_config_item item; + unsigned long mclk_rate; + const u8 *gcm; + int i, count; + + mclk_rate = clk_get_rate(pef2256->mclk); + switch (mclk_rate) { + case 1544000: + item = PEF2256_GCM_CONFIG_1544000; + break; + case 2048000: + item = PEF2256_GCM_CONFIG_2048000; + break; + case 8192000: + item = PEF2256_GCM_CONFIG_8192000; + break; + case 10000000: + item = PEF2256_GCM_CONFIG_10000000; + break; + case 12352000: + item = PEF2256_GCM_CONFIG_12352000; + break; + case 16384000: + item = PEF2256_GCM_CONFIG_16384000; + break; + default: + dev_err(pef2256->dev, "Unsupported v2.x MCLK rate %lu\n", mclk_rate); + return -EINVAL; + } + + BUILD_BUG_ON(item >= ARRAY_SIZE(pef2256_gcm_configs)); + + if (pef2256->version == PEF2256_VERSION_1_2) { + gcm = pef2256_gcm_configs[item].gcm_12; + count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_12); + } else { + gcm = pef2256_gcm_configs[item].gcm_2x; + count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_2x); + } + + for (i = 0; i < count; i++) + pef2256_write8(pef2256, PEF2256_GCM(i + 1), *(gcm + i)); + + return 0; +} + +static int pef2256_setup_e1_line(struct pef2256 *pef2256) +{ + u8 fmr1, fmr2; + + /* RCLK output : DPLL clock, DCO-X enabled, DCO-X internal ref clock */ + pef2256_write8(pef2256, PEF2256_CMR1, 0x00); + + /* SCLKR selected, SCLKX selected, + * receive synchro pulse sourced by SYPR, + * transmit synchro pulse sourced by SYPX, + * DCO-X center frequency enabled + */ + pef2256_write8(pef2256, PEF2256_CMR2, PEF2256_CMR2_DCOXC); + + if (pef2256->is_subordinate) { + /* select RCLK source = 2M, disable switching from RCLK to SYNC */ + pef2256_clrsetbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_RS_MASK, + PEF2256_CMR1_RS_DCOR_2048 | PEF2256_CMR1_DCS); + } + + /* slave mode, local loop off, mode short-haul + * In v2.x, bit3 is a forced 1 bit in the datasheet -> Need to be set. + */ + if (pef2256->version == PEF2256_VERSION_1_2) + pef2256_write8(pef2256, PEF2256_LIM0, 0x00); + else + pef2256_write8(pef2256, PEF2256_LIM0, PEF2256_2X_LIM0_BIT3); + + /* "master" mode */ + if (!pef2256->is_subordinate) + pef2256_setbits8(pef2256, PEF2256_LIM0, PEF2256_LIM0_MAS); + + /* analog interface selected, remote loop off */ + pef2256_write8(pef2256, PEF2256_LIM1, 0x00); + + /* receive input threshold = 0,21V */ + if (pef2256->version == PEF2256_VERSION_1_2) + pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_12_LIM1_RIL_MASK, + PEF2256_12_LIM1_RIL_210); + else + pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_2X_LIM1_RIL_MASK, + PEF2256_2X_LIM1_RIL_210); + + /* transmit pulse mask, default value from datasheet + * transmit line in normal operation + */ + if (pef2256->version == PEF2256_VERSION_1_2) + pef2256_write8(pef2256, PEF2256_XPM0, 0x7B); + else + pef2256_write8(pef2256, PEF2256_XPM0, 0x9C); + pef2256_write8(pef2256, PEF2256_XPM1, 0x03); + pef2256_write8(pef2256, PEF2256_XPM2, 0x00); + + /* HDB3 coding, no alarm simulation */ + pef2256_write8(pef2256, PEF2256_FMR0, PEF2256_FMR0_XC_HDB3 | PEF2256_FMR0_RC_HDB3); + + /* E1, frame format, 2 Mbit/s system data rate, no AIS + * transmission to remote end or system interface, payload loop + * off, transmit remote alarm on + */ + fmr1 = 0x00; + fmr2 = PEF2256_FMR2_AXRA; + switch (pef2256->frame_type) { + case PEF2256_FRAME_E1_DOUBLEFRAME: + fmr2 |= PEF2256_FMR2_RFS_DOUBLEFRAME; + break; + case PEF2256_FRAME_E1_CRC4_MULTIFRAME: + fmr1 |= PEF2256_FMR1_XFS; + fmr2 |= PEF2256_FMR2_RFS_CRC4_MULTIFRAME; + break; + case PEF2256_FRAME_E1_AUTO_MULTIFRAME: + fmr1 |= PEF2256_FMR1_XFS; + fmr2 |= PEF2256_FMR2_RFS_AUTO_MULTIFRAME; + break; + default: + dev_err(pef2256->dev, "Unsupported frame type %d\n", pef2256->frame_type); + return -EINVAL; + } + pef2256_clrsetbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_XFS, fmr1); + pef2256_write8(pef2256, PEF2256_FMR2, fmr2); + + if (!pef2256->is_subordinate) { + /* SEC input, active high */ + pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_SEC_IN_HIGH); + } else { + /* FSC output, active high */ + pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_FSC_OUT_HIGH); + } + + /* SCLKR, SCLKX, RCLK configured to inputs, + * XFMS active low, CLK1 and CLK2 pin configuration + */ + pef2256_write8(pef2256, PEF2256_PC5, 0x00); + pef2256_write8(pef2256, PEF2256_PC6, 0x00); + + /* port RCLK is output */ + pef2256_setbits8(pef2256, PEF2256_PC5, PEF2256_PC5_CRP); + + return 0; +} + +static void pef2256_setup_e1_los(struct pef2256 *pef2256) +{ + /* detection of LOS alarm = 176 pulses (ie (10 + 1) * 16) */ + pef2256_write8(pef2256, PEF2256_PCD, 10); + /* recovery of LOS alarm = 22 pulses (ie 21 + 1) */ + pef2256_write8(pef2256, PEF2256_PCR, 21); + /* E1 default for the receive slicer threshold */ + pef2256_write8(pef2256, PEF2256_LIM2, PEF2256_LIM2_SLT_THR50); + if (pef2256->is_subordinate) { + /* Loop-timed */ + pef2256_setbits8(pef2256, PEF2256_LIM2, PEF2256_LIM2_ELT); + } +} + +static int pef2256_setup_e1_system(struct pef2256 *pef2256) +{ + u8 sic1, fmr1; + + /* 2.048 MHz system clocking rate, receive buffer 2 frames, transmit + * buffer bypass, data sampled and transmitted on the falling edge of + * SCLKR/X, automatic freeze signaling, data is active in the first + * channel phase + */ + pef2256_write8(pef2256, PEF2256_SIC1, 0x00); + pef2256_write8(pef2256, PEF2256_SIC2, 0x00); + pef2256_write8(pef2256, PEF2256_SIC3, 0x00); + + if (pef2256->is_subordinate) { + /* transmit buffer size = 2 frames, transparent mode */ + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_XBS_MASK, + PEF2256_SIC1_XBS_2FRAMES); + } + + if (pef2256->version != PEF2256_VERSION_1_2) { + /* during inactive channel phase switch RDO/RSIG into tri-state */ + pef2256_setbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RTRI); + } + + if (pef2256->is_tx_falling_edge) { + /* falling edge sync pulse transmit, rising edge sync pulse receive */ + pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESX, PEF2256_SIC3_RESR); + } else { + /* rising edge sync pulse transmit, falling edge sync pulse receive */ + pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESR, PEF2256_SIC3_RESX); + } + + /* transmit offset counter (XCO10..0) = 4 */ + pef2256_write8(pef2256, PEF2256_XC0, 0); + pef2256_write8(pef2256, PEF2256_XC1, 4); + /* receive offset counter (RCO10..0) = 4 */ + pef2256_write8(pef2256, PEF2256_RC0, 0); + pef2256_write8(pef2256, PEF2256_RC1, 4); + + /* system clock rate */ + switch (pef2256->sysclk_rate) { + case 2048000: + sic1 = PEF2256_SIC1_SSC_2048; + break; + case 4096000: + sic1 = PEF2256_SIC1_SSC_4096; + break; + case 8192000: + sic1 = PEF2256_SIC1_SSC_8192; + break; + case 16384000: + sic1 = PEF2256_SIC1_SSC_16384; + break; + default: + dev_err(pef2256->dev, "Unsupported sysclk rate %lu\n", pef2256->sysclk_rate); + return -EINVAL; + } + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSC_MASK, sic1); + + /* data clock rate */ + switch (pef2256->data_rate) { + case 2048000: + fmr1 = PEF2256_FMR1_SSD_2048; + sic1 = PEF2256_SIC1_SSD_2048; + break; + case 4096000: + fmr1 = PEF2256_FMR1_SSD_4096; + sic1 = PEF2256_SIC1_SSD_4096; + break; + case 8192000: + fmr1 = PEF2256_FMR1_SSD_8192; + sic1 = PEF2256_SIC1_SSD_8192; + break; + case 16384000: + fmr1 = PEF2256_FMR1_SSD_16384; + sic1 = PEF2256_SIC1_SSD_16384; + break; + default: + dev_err(pef2256->dev, "Unsupported data rate %u\n", pef2256->data_rate); + return -EINVAL; + } + pef2256_clrsetbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_SSD_MASK, fmr1); + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSD_MASK, sic1); + + /* channel phase */ + pef2256_clrsetbits8(pef2256, PEF2256_SIC2, PEF2256_SIC2_SICS_MASK, + PEF2256_SIC2_SICS(pef2256->channel_phase)); + + return 0; +} + +static void pef2256_setup_e1_signaling(struct pef2256 *pef2256) +{ + /* All bits of the transmitted service word are cleared */ + pef2256_write8(pef2256, PEF2256_XSW, PEF2256_XSW_XY(0x1F)); + + /* CAS disabled and clear spare bit values */ + pef2256_write8(pef2256, PEF2256_XSP, 0x00); + + if (pef2256->is_subordinate) { + /* transparent mode */ + pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XTM); + } + + /* Si-Bit, Spare bit For International, FAS word */ + pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XSIS); + pef2256_setbits8(pef2256, PEF2256_XSP, PEF2256_XSP_XSIF); + + /* no transparent mode active */ + pef2256_write8(pef2256, PEF2256_TSWM, 0x00); +} + +static void pef2256_setup_e1_errors(struct pef2256 *pef2256) +{ + /* error counter latched every 1s */ + pef2256_setbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_ECM); + + /* error counter mode COFA */ + pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_ECMC); + + /* errors in service words have no influence */ + pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_SWD); + + /* 4 consecutive incorrect FAS causes loss of sync */ + pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_ASY4); +} + +static int pef2256_setup_e1(struct pef2256 *pef2256) +{ + int ret; + + /* Setup, Master clocking mode (GCM8..1) */ + ret = pef2256_setup_gcm(pef2256); + if (ret) + return ret; + + /* Select E1 mode */ + pef2256_write8(pef2256, PEF2256_FMR1, 0x00); + + /* internal second timer, power on */ + pef2256_write8(pef2256, PEF2256_GCR, 0x00); + + /* Setup line interface */ + ret = pef2256_setup_e1_line(pef2256); + if (ret) + return ret; + + /* Setup Loss-of-signal detection and recovery */ + pef2256_setup_e1_los(pef2256); + + /* Setup system interface */ + ret = pef2256_setup_e1_system(pef2256); + if (ret) + return ret; + + /* Setup signaling */ + pef2256_setup_e1_signaling(pef2256); + + /* Setup errors counters and condition */ + pef2256_setup_e1_errors(pef2256); + + /* status changed interrupt at both up and down */ + pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_SCI); + + /* Clear any ISR2 pending interrupts and unmask needed interrupts */ + pef2256_read8(pef2256, PEF2256_ISR2); + pef2256_clrbits8(pef2256, PEF2256_IMR2, PEF2256_INT2_LOS | PEF2256_INT2_AIS); + + /* reset lines */ + pef2256_write8(pef2256, PEF2256_CMDR, PEF2256_CMDR_RRES | PEF2256_CMDR_XRES); + return 0; +} + +static void pef2256_isr_default_handler(struct pef2256 *pef2256, u8 nbr, u8 isr) +{ + dev_warn_ratelimited(pef2256->dev, "ISR%u: 0x%02x not handled\n", nbr, isr); +} + +static bool pef2256_is_carrier_on(struct pef2256 *pef2256) +{ + u8 frs0; + + frs0 = pef2256_read8(pef2256, PEF2256_FRS0); + return !(frs0 & (PEF2256_FRS0_LOS | PEF2256_FRS0_AIS)); +} + +static void pef2256_isr2_handler(struct pef2256 *pef2256, u8 nbr, u8 isr) +{ + bool carrier; + + if (isr & (PEF2256_INT2_LOS | PEF2256_INT2_AIS)) { + carrier = pef2256_is_carrier_on(pef2256); + if (atomic_xchg(&pef2256->carrier, carrier) != carrier) + framer_notify_status_change(pef2256->framer); + } +} + +static irqreturn_t pef2256_irq_handler(int irq, void *priv) +{ + static void (*pef2256_isr_handler[])(struct pef2256 *, u8, u8) = { + [0] = pef2256_isr_default_handler, + [1] = pef2256_isr_default_handler, + [2] = pef2256_isr2_handler, + [3] = pef2256_isr_default_handler, + [4] = pef2256_isr_default_handler, + [5] = pef2256_isr_default_handler + }; + struct pef2256 *pef2256 = (struct pef2256 *)priv; + u8 gis; + u8 isr; + u8 n; + + gis = pef2256_read8(pef2256, PEF2256_GIS); + + for (n = 0; n < ARRAY_SIZE(pef2256_isr_handler); n++) { + if (gis & PEF2256_GIS_ISR(n)) { + isr = pef2256_read8(pef2256, PEF2256_ISR(n)); + pef2256_isr_handler[n](pef2256, n, isr); + } + } + + return IRQ_HANDLED; +} + +static int pef2256_check_rates(struct pef2256 *pef2256, unsigned long sysclk_rate, + unsigned long data_rate) +{ + unsigned long rate; + + switch (sysclk_rate) { + case 2048000: + case 4096000: + case 8192000: + case 16384000: + break; + default: + dev_err(pef2256->dev, "Unsupported system clock rate %lu\n", sysclk_rate); + return -EINVAL; + } + + for (rate = data_rate; rate <= data_rate * 4; rate *= 2) { + if (rate == sysclk_rate) + return 0; + } + dev_err(pef2256->dev, "Unsupported data rate %lu with system clock rate %lu\n", + data_rate, sysclk_rate); + return -EINVAL; +} + +static int pef2556_of_parse(struct pef2256 *pef2256, struct device_node *np) +{ + int ret; + + pef2256->data_rate = 2048000; + ret = of_property_read_u32(np, "lantiq,data-rate-bps", &pef2256->data_rate); + if (ret && ret != -EINVAL) { + dev_err(pef2256->dev, "%pOF: failed to read lantiq,data-rate-bps\n", np); + return ret; + } + + ret = pef2256_check_rates(pef2256, pef2256->sysclk_rate, pef2256->data_rate); + if (ret) + return ret; + + pef2256->is_tx_falling_edge = of_property_read_bool(np, "lantiq,clock-falling-edge"); + + pef2256->channel_phase = 0; + ret = of_property_read_u8(np, "lantiq,channel-phase", &pef2256->channel_phase); + if (ret && ret != -EINVAL) { + dev_err(pef2256->dev, "%pOF: failed to read lantiq,channel-phase\n", + np); + return ret; + } + if (pef2256->channel_phase >= pef2256->sysclk_rate / pef2256->data_rate) { + dev_err(pef2256->dev, "%pOF: Invalid lantiq,channel-phase %u\n", + np, pef2256->channel_phase); + return -EINVAL; + } + + return 0; +} + +static const struct regmap_config pef2256_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .max_register = 0xff, +}; + +static const struct mfd_cell pef2256_devs[] = { + { .name = "lantiq-pef2256-pinctrl", }, +}; + +static int pef2256_add_audio_devices(struct pef2256 *pef2256) +{ + const char *compatible = "lantiq,pef2256-codec"; + struct mfd_cell *audio_devs; + struct device_node *np; + unsigned int count = 0; + unsigned int i; + int ret; + + for_each_available_child_of_node(pef2256->dev->of_node, np) { + if (of_device_is_compatible(np, compatible)) + count++; + } + + if (!count) + return 0; + + audio_devs = kcalloc(count, sizeof(*audio_devs), GFP_KERNEL); + if (!audio_devs) + return -ENOMEM; + + for (i = 0; i < count; i++) { + audio_devs[i].name = "framer-codec"; + audio_devs[i].of_compatible = compatible; + audio_devs[i].id = i; + } + + ret = mfd_add_devices(pef2256->dev, 0, audio_devs, count, NULL, 0, NULL); + kfree(audio_devs); + return ret; +} + +static int pef2256_framer_get_status(struct framer *framer, struct framer_status *status) +{ + struct pef2256 *pef2256 = framer_get_drvdata(framer); + + status->link_is_on = !!atomic_read(&pef2256->carrier); + return 0; +} + +static int pef2256_framer_set_config(struct framer *framer, const struct framer_config *config) +{ + struct pef2256 *pef2256 = framer_get_drvdata(framer); + + if (config->iface != FRAMER_IFACE_E1) { + dev_err(pef2256->dev, "Only E1 line is currently supported\n"); + return -EOPNOTSUPP; + } + + switch (config->clock_type) { + case FRAMER_CLOCK_EXT: + pef2256->is_subordinate = true; + break; + case FRAMER_CLOCK_INT: + pef2256->is_subordinate = false; + break; + default: + return -EINVAL; + } + + /* Apply the new settings */ + return pef2256_setup_e1(pef2256); +} + +static int pef2256_framer_get_config(struct framer *framer, struct framer_config *config) +{ + struct pef2256 *pef2256 = framer_get_drvdata(framer); + + config->iface = FRAMER_IFACE_E1; + config->clock_type = pef2256->is_subordinate ? FRAMER_CLOCK_EXT : FRAMER_CLOCK_INT; + config->line_clock_rate = 2048000; + return 0; +} + +static const struct framer_ops pef2256_framer_ops = { + .owner = THIS_MODULE, + .get_status = pef2256_framer_get_status, + .get_config = pef2256_framer_get_config, + .set_config = pef2256_framer_set_config, +}; + +static int pef2256_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + unsigned long sclkr_rate, sclkx_rate; + struct framer_provider *framer_provider; + struct pef2256 *pef2256; + const char *version_txt; + void __iomem *iomem; + int ret; + int irq; + + pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL); + if (!pef2256) + return -ENOMEM; + + pef2256->dev = &pdev->dev; + atomic_set(&pef2256->carrier, 0); + + pef2256->is_subordinate = true; + pef2256->frame_type = PEF2256_FRAME_E1_DOUBLEFRAME; + + iomem = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(iomem)) + return PTR_ERR(iomem); + + pef2256->regmap = devm_regmap_init_mmio(&pdev->dev, iomem, + &pef2256_regmap_config); + if (IS_ERR(pef2256->regmap)) { + dev_err(&pdev->dev, "Failed to initialise Regmap (%ld)\n", + PTR_ERR(pef2256->regmap)); + return PTR_ERR(pef2256->regmap); + } + + pef2256->mclk = devm_clk_get_enabled(&pdev->dev, "mclk"); + if (IS_ERR(pef2256->mclk)) + return PTR_ERR(pef2256->mclk); + + pef2256->sclkr = devm_clk_get_enabled(&pdev->dev, "sclkr"); + if (IS_ERR(pef2256->sclkr)) + return PTR_ERR(pef2256->sclkr); + + pef2256->sclkx = devm_clk_get_enabled(&pdev->dev, "sclkx"); + if (IS_ERR(pef2256->sclkx)) + return PTR_ERR(pef2256->sclkx); + + /* Both SCLKR (receive) and SCLKX (transmit) must have the same rate, + * stored as sysclk_rate. + * The exact value will be checked at pef2256_check_rates() + */ + sclkr_rate = clk_get_rate(pef2256->sclkr); + sclkx_rate = clk_get_rate(pef2256->sclkx); + if (sclkr_rate != sclkx_rate) { + dev_err(pef2256->dev, "clk rate mismatch. sclkr %lu Hz, sclkx %lu Hz\n", + sclkr_rate, sclkx_rate); + return -EINVAL; + } + pef2256->sysclk_rate = sclkr_rate; + + /* Reset the component. The MCLK clock must be active during reset */ + pef2256->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pef2256->reset_gpio)) + return PTR_ERR(pef2256->reset_gpio); + if (pef2256->reset_gpio) { + gpiod_set_value_cansleep(pef2256->reset_gpio, 1); + usleep_range(10, 20); + gpiod_set_value_cansleep(pef2256->reset_gpio, 0); + usleep_range(10, 20); + } + + pef2256->version = pef2256_get_version(pef2256); + switch (pef2256->version) { + case PEF2256_VERSION_1_2: + version_txt = "1.2"; + break; + case PEF2256_VERSION_2_1: + version_txt = "2.1"; + break; + case PEF2256_VERSION_2_2: + version_txt = "2.2"; + break; + default: + return -ENODEV; + } + dev_info(pef2256->dev, "Version %s detected\n", version_txt); + + ret = pef2556_of_parse(pef2256, np); + if (ret) + return ret; + + /* Create the framer. It can be used on interrupts */ + pef2256->framer = devm_framer_create(pef2256->dev, NULL, &pef2256_framer_ops); + if (IS_ERR(pef2256->framer)) + return PTR_ERR(pef2256->framer); + + framer_set_drvdata(pef2256->framer, pef2256); + + /* Disable interrupts */ + pef2256_write8(pef2256, PEF2256_IMR0, 0xff); + pef2256_write8(pef2256, PEF2256_IMR1, 0xff); + pef2256_write8(pef2256, PEF2256_IMR2, 0xff); + pef2256_write8(pef2256, PEF2256_IMR3, 0xff); + pef2256_write8(pef2256, PEF2256_IMR4, 0xff); + pef2256_write8(pef2256, PEF2256_IMR5, 0xff); + + /* Clear any pending interrupts */ + pef2256_read8(pef2256, PEF2256_ISR0); + pef2256_read8(pef2256, PEF2256_ISR1); + pef2256_read8(pef2256, PEF2256_ISR2); + pef2256_read8(pef2256, PEF2256_ISR3); + pef2256_read8(pef2256, PEF2256_ISR4); + pef2256_read8(pef2256, PEF2256_ISR5); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + ret = devm_request_irq(pef2256->dev, irq, pef2256_irq_handler, 0, "pef2256", pef2256); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, pef2256); + + ret = mfd_add_devices(pef2256->dev, 0, pef2256_devs, + ARRAY_SIZE(pef2256_devs), NULL, 0, NULL); + if (ret) { + dev_err(pef2256->dev, "add devices failed (%d)\n", ret); + return ret; + } + + ret = pef2256_setup_e1(pef2256); + if (ret) + return ret; + + framer_provider = devm_framer_provider_of_register(pef2256->dev, + framer_provider_simple_of_xlate); + if (IS_ERR(framer_provider)) + return PTR_ERR(framer_provider); + + /* Add audio devices */ + ret = pef2256_add_audio_devices(pef2256); + if (ret < 0) { + dev_err(pef2256->dev, "add audio devices failed (%d)\n", ret); + return ret; + } + + return 0; +} + +static int pef2256_remove(struct platform_device *pdev) +{ + struct pef2256 *pef2256 = platform_get_drvdata(pdev); + + /* Disable interrupts */ + pef2256_write8(pef2256, PEF2256_IMR0, 0xff); + pef2256_write8(pef2256, PEF2256_IMR1, 0xff); + pef2256_write8(pef2256, PEF2256_IMR2, 0xff); + pef2256_write8(pef2256, PEF2256_IMR3, 0xff); + pef2256_write8(pef2256, PEF2256_IMR4, 0xff); + pef2256_write8(pef2256, PEF2256_IMR5, 0xff); + + return 0; +} + +static const struct of_device_id pef2256_id_table[] = { + { .compatible = "lantiq,pef2256" }, + {} /* sentinel */ +}; +MODULE_DEVICE_TABLE(of, pef2256_id_table); + +static struct platform_driver pef2256_driver = { + .driver = { + .name = "lantiq-pef2256", + .of_match_table = pef2256_id_table, + }, + .probe = pef2256_probe, + .remove = pef2256_remove, +}; +module_platform_driver(pef2256_driver); + +struct regmap *pef2256_get_regmap(struct pef2256 *pef2256) +{ + return pef2256->regmap; +} +EXPORT_SYMBOL_GPL(pef2256_get_regmap); + +MODULE_AUTHOR("Herve Codina "); +MODULE_DESCRIPTION("PEF2256 driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/framer/pef2256.h b/include/linux/framer/pef2256.h new file mode 100644 index 000000000000..71d80af58c40 --- /dev/null +++ b/include/linux/framer/pef2256.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PEF2256 consumer API + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ +#ifndef __PEF2256_H__ +#define __PEF2256_H__ + +#include + +struct pef2256; +struct regmap; + +/* Retrieve the PEF2256 regmap */ +struct regmap *pef2256_get_regmap(struct pef2256 *pef2256); + +/* PEF2256 hardware versions */ +enum pef2256_version { + PEF2256_VERSION_UNKNOWN, + PEF2256_VERSION_1_2, + PEF2256_VERSION_2_1, + PEF2256_VERSION_2_2, +}; + +/* Get the PEF2256 hardware version */ +enum pef2256_version pef2256_get_version(struct pef2256 *pef2256); + +#endif /* __PEF2256_H__ */ From patchwork Tue Nov 28 13:25:33 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13471144 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="ZQzrWe8g" Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 089A0D6D; Tue, 28 Nov 2023 05:25:43 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPA id BE2D360012; Tue, 28 Nov 2023 13:25:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1701177942; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=iz5RkQI72ReqQg+DnAWOxEWoMh6xNEzC8hBZwSS9GQA=; b=ZQzrWe8grm7HQDIiCcz/o/Iw64VgEQ7+jUKqjTnKLVQC7RH6LKSRnD6fCJcGdLCM/JAdtQ C/11yG7c46rdTq+Anwqya9fND79XFiYZebR1FBlgriF3yQdbEN6XIIGY9Abp6e4fgZ7+qL gi2uC32B8cAA5hb1iKHMhGzXlkrdYhkm5btt/5+/x2G5pU8WHYjJpAF5nHZTNdzz7hKUQt VYUd0b+YcsLHK6oPDMwARW8qMUj0FiNE087NYJ/rae7iGeqg7hB534gFMFc1KLGbKCxHPO RpzVTPZMXLmg0YsU8Fl5sOBA9rr/nVPo9bBj3thaVydfVEsmdQ8UBjyuevclgA== From: Herve Codina To: Herve Codina , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Andrew Lunn , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Linus Walleij , Liam Girdwood , Mark Brown Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Christophe Leroy , Thomas Petazzoni Subject: [PATCH 4/5] pinctrl: Add support for the Lantic PEF2256 pinmux Date: Tue, 28 Nov 2023 14:25:33 +0100 Message-ID: <20231128132534.258459-5-herve.codina@bootlin.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231128132534.258459-1-herve.codina@bootlin.com> References: <20231128132534.258459-1-herve.codina@bootlin.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: herve.codina@bootlin.com The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. This kind of component can be found in old telecommunication system. It was used to digital transmission of many simultaneous telephone calls by time-division multiplexing. Also using HDLC protocol, WAN networks can be reached through the framer. This pinmux support handles the pin muxing part (pins RP(A..D) and pins XP(A..D)) of the PEF2256. Signed-off-by: Herve Codina Reviewed-by: Christophe Leroy Reviewed-by: Linus Walleij --- drivers/pinctrl/Kconfig | 15 ++ drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-pef2256.c | 358 ++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-pef2256.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1de4e1edede0..b11144bb448c 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -366,6 +366,21 @@ config PINCTRL_PALMAS open drain configuration for the Palmas series devices like TPS65913, TPS80036 etc. +config PINCTRL_PEF2256 + tristate "Lantiq PEF2256 (FALC56) pin controller driver" + depends on OF && FRAMER_PEF2256 + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + This option enables the pin controller support for the Lantiq PEF2256 + framer, also known as FALC56. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pinctrl-pef2256. + config PINCTRL_PIC32 bool "Microchip PIC32 pin controller driver" depends on OF diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 37575deb7a69..7ac5d59c83e7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o obj-$(CONFIG_PINCTRL_MLXBF3) += pinctrl-mlxbf3.o obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o +obj-$(CONFIG_PINCTRL_PEF2256) += pinctrl-pef2256.o obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o diff --git a/drivers/pinctrl/pinctrl-pef2256.c b/drivers/pinctrl/pinctrl-pef2256.c new file mode 100644 index 000000000000..868ea33bec3c --- /dev/null +++ b/drivers/pinctrl/pinctrl-pef2256.c @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PEF2256 also known as FALC56 driver + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Port Configuration 1..4 */ +#define PEF2256_PC1 0x80 +#define PEF2256_PC2 0x81 +#define PEF2256_PC3 0x82 +#define PEF2256_PC4 0x83 +#define PEF2256_12_PC_RPC_MASK GENMASK(6, 4) +#define PEF2256_12_PC_RPC_SYPR FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x0) +#define PEF2256_12_PC_RPC_RFM FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x1) +#define PEF2256_12_PC_RPC_RFMB FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x2) +#define PEF2256_12_PC_RPC_RSIGM FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x3) +#define PEF2256_12_PC_RPC_RSIG FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x4) +#define PEF2256_12_PC_RPC_DLR FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x5) +#define PEF2256_12_PC_RPC_FREEZE FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x6) +#define PEF2256_12_PC_RPC_RFSP FIELD_PREP_CONST(PEF2256_12_PC_RPC_MASK, 0x7) +#define PEF2256_12_PC_XPC_MASK GENMASK(4, 0) +#define PEF2256_12_PC_XPC_SYPX FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x0) +#define PEF2256_12_PC_XPC_XFMS FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x1) +#define PEF2256_12_PC_XPC_XSIG FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x2) +#define PEF2256_12_PC_XPC_TCLK FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x3) +#define PEF2256_12_PC_XPC_XMFB FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x4) +#define PEF2256_12_PC_XPC_XSIGM FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x5) +#define PEF2256_12_PC_XPC_DLX FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x6) +#define PEF2256_12_PC_XPC_XCLK FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x7) +#define PEF2256_12_PC_XPC_XLT FIELD_PREP_CONST(PEF2256_12_PC_XPC_MASK, 0x8) +#define PEF2256_2X_PC_RPC_MASK GENMASK(7, 4) +#define PEF2256_2X_PC_RPC_SYPR FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x0) +#define PEF2256_2X_PC_RPC_RFM FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x1) +#define PEF2256_2X_PC_RPC_RFMB FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x2) +#define PEF2256_2X_PC_RPC_RSIGM FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x3) +#define PEF2256_2X_PC_RPC_RSIG FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x4) +#define PEF2256_2X_PC_RPC_DLR FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x5) +#define PEF2256_2X_PC_RPC_FREEZE FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x6) +#define PEF2256_2X_PC_RPC_RFSP FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x7) +#define PEF2256_2X_PC_RPC_GPI FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0x9) +#define PEF2256_2X_PC_RPC_GPOH FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0xa) +#define PEF2256_2X_PC_RPC_GPOL FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0xb) +#define PEF2256_2X_PC_RPC_LOS FIELD_PREP_CONST(PEF2256_2X_PC_RPC_MASK, 0xc) +#define PEF2256_2X_PC_XPC_MASK GENMASK(3, 0) +#define PEF2256_2X_PC_XPC_SYPX FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x0) +#define PEF2256_2X_PC_XPC_XFMS FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x1) +#define PEF2256_2X_PC_XPC_XSIG FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x2) +#define PEF2256_2X_PC_XPC_TCLK FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x3) +#define PEF2256_2X_PC_XPC_XMFB FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x4) +#define PEF2256_2X_PC_XPC_XSIGM FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x5) +#define PEF2256_2X_PC_XPC_DLX FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x6) +#define PEF2256_2X_PC_XPC_XCLK FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x7) +#define PEF2256_2X_PC_XPC_XLT FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x8) +#define PEF2256_2X_PC_XPC_GPI FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0x9) +#define PEF2256_2X_PC_XPC_GPOH FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0xa) +#define PEF2256_2X_PC_XPC_GPOL FIELD_PREP_CONST(PEF2256_2X_PC_XPC_MASK, 0xb) + +struct pef2256_pinreg_desc { + int offset; + u8 mask; +}; + +struct pef2256_function_desc { + const char *name; + const char * const*groups; + unsigned int ngroups; + u8 func_val; +}; + +struct pef2256_pinctrl { + struct device *dev; + struct regmap *regmap; + enum pef2256_version version; + struct pinctrl_desc pctrl_desc; + const struct pef2256_function_desc *functions; + unsigned int nfunctions; +}; + +static int pef2256_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + /* We map 1 group <-> 1 pin */ + return pef2256->pctrl_desc.npins; +} + +static const char *pef2256_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + /* We map 1 group <-> 1 pin */ + return pef2256->pctrl_desc.pins[selector].name; +} + +static int pef2256_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector, + const unsigned int **pins, + unsigned int *num_pins) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + /* We map 1 group <-> 1 pin */ + *pins = &pef2256->pctrl_desc.pins[selector].number; + *num_pins = 1; + + return 0; +} + +static const struct pinctrl_ops pef2256_pctlops = { + .get_groups_count = pef2256_get_groups_count, + .get_group_name = pef2256_get_group_name, + .get_group_pins = pef2256_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +static int pef2256_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + return pef2256->nfunctions; +} + +static const char *pef2256_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + return pef2256->functions[selector].name; +} + +static int pef2256_get_function_groups(struct pinctrl_dev *pctldev, unsigned int selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + + *groups = pef2256->functions[selector].groups; + *num_groups = pef2256->functions[selector].ngroups; + return 0; +} + +static int pef2256_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector, + unsigned int group_selector) +{ + struct pef2256_pinctrl *pef2256 = pinctrl_dev_get_drvdata(pctldev); + const struct pef2256_pinreg_desc *pinreg_desc; + u8 func_val; + + /* We map 1 group <-> 1 pin */ + pinreg_desc = pef2256->pctrl_desc.pins[group_selector].drv_data; + func_val = pef2256->functions[func_selector].func_val; + + return regmap_update_bits(pef2256->regmap, pinreg_desc->offset, + pinreg_desc->mask, func_val); +} + +static const struct pinmux_ops pef2256_pmxops = { + .get_functions_count = pef2256_get_functions_count, + .get_function_name = pef2256_get_function_name, + .get_function_groups = pef2256_get_function_groups, + .set_mux = pef2256_set_mux, +}; + +#define PEF2256_PINCTRL_PIN(_number, _name, _offset, _mask) { \ + .number = _number, \ + .name = _name, \ + .drv_data = &(struct pef2256_pinreg_desc) { \ + .offset = _offset, \ + .mask = _mask, \ + }, \ +} + +static const struct pinctrl_pin_desc pef2256_v12_pins[] = { + PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_12_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_12_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_12_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_12_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_12_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_12_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_12_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_12_PC_XPC_MASK), +}; + +static const struct pinctrl_pin_desc pef2256_v2x_pins[] = { + PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_2X_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_2X_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_2X_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_2X_PC_RPC_MASK), + PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_2X_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_2X_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_2X_PC_XPC_MASK), + PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_2X_PC_XPC_MASK), +}; + +static const char *const pef2256_rp_groups[] = { "RPA", "RPB", "RPC", "RPD" }; +static const char *const pef2256_xp_groups[] = { "XPA", "XPB", "XPC", "XPD" }; +static const char *const pef2256_all_groups[] = { "RPA", "RPB", "RPC", "RPD", + "XPA", "XPB", "XPC", "XPD" }; + +#define PEF2256_FUNCTION(_name, _func_val, _groups) { \ + .name = _name, \ + .groups = _groups, \ + .ngroups = ARRAY_SIZE(_groups), \ + .func_val = _func_val, \ +} + +static const struct pef2256_function_desc pef2256_v2x_functions[] = { + PEF2256_FUNCTION("SYPR", PEF2256_2X_PC_RPC_SYPR, pef2256_rp_groups), + PEF2256_FUNCTION("RFM", PEF2256_2X_PC_RPC_RFM, pef2256_rp_groups), + PEF2256_FUNCTION("RFMB", PEF2256_2X_PC_RPC_RFMB, pef2256_rp_groups), + PEF2256_FUNCTION("RSIGM", PEF2256_2X_PC_RPC_RSIGM, pef2256_rp_groups), + PEF2256_FUNCTION("RSIG", PEF2256_2X_PC_RPC_RSIG, pef2256_rp_groups), + PEF2256_FUNCTION("DLR", PEF2256_2X_PC_RPC_DLR, pef2256_rp_groups), + PEF2256_FUNCTION("FREEZE", PEF2256_2X_PC_RPC_FREEZE, pef2256_rp_groups), + PEF2256_FUNCTION("RFSP", PEF2256_2X_PC_RPC_RFSP, pef2256_rp_groups), + PEF2256_FUNCTION("LOS", PEF2256_2X_PC_RPC_LOS, pef2256_rp_groups), + + PEF2256_FUNCTION("SYPX", PEF2256_2X_PC_XPC_SYPX, pef2256_xp_groups), + PEF2256_FUNCTION("XFMS", PEF2256_2X_PC_XPC_XFMS, pef2256_xp_groups), + PEF2256_FUNCTION("XSIG", PEF2256_2X_PC_XPC_XSIG, pef2256_xp_groups), + PEF2256_FUNCTION("TCLK", PEF2256_2X_PC_XPC_TCLK, pef2256_xp_groups), + PEF2256_FUNCTION("XMFB", PEF2256_2X_PC_XPC_XMFB, pef2256_xp_groups), + PEF2256_FUNCTION("XSIGM", PEF2256_2X_PC_XPC_XSIGM, pef2256_xp_groups), + PEF2256_FUNCTION("DLX", PEF2256_2X_PC_XPC_DLX, pef2256_xp_groups), + PEF2256_FUNCTION("XCLK", PEF2256_2X_PC_XPC_XCLK, pef2256_xp_groups), + PEF2256_FUNCTION("XLT", PEF2256_2X_PC_XPC_XLT, pef2256_xp_groups), + + PEF2256_FUNCTION("GPI", PEF2256_2X_PC_RPC_GPI | PEF2256_2X_PC_XPC_GPI, + pef2256_all_groups), + PEF2256_FUNCTION("GPOH", PEF2256_2X_PC_RPC_GPOH | PEF2256_2X_PC_XPC_GPOH, + pef2256_all_groups), + PEF2256_FUNCTION("GPOL", PEF2256_2X_PC_RPC_GPOL | PEF2256_2X_PC_XPC_GPOL, + pef2256_all_groups), +}; + +static const struct pef2256_function_desc pef2256_v12_functions[] = { + PEF2256_FUNCTION("SYPR", PEF2256_12_PC_RPC_SYPR, pef2256_rp_groups), + PEF2256_FUNCTION("RFM", PEF2256_12_PC_RPC_RFM, pef2256_rp_groups), + PEF2256_FUNCTION("RFMB", PEF2256_12_PC_RPC_RFMB, pef2256_rp_groups), + PEF2256_FUNCTION("RSIGM", PEF2256_12_PC_RPC_RSIGM, pef2256_rp_groups), + PEF2256_FUNCTION("RSIG", PEF2256_12_PC_RPC_RSIG, pef2256_rp_groups), + PEF2256_FUNCTION("DLR", PEF2256_12_PC_RPC_DLR, pef2256_rp_groups), + PEF2256_FUNCTION("FREEZE", PEF2256_12_PC_RPC_FREEZE, pef2256_rp_groups), + PEF2256_FUNCTION("RFSP", PEF2256_12_PC_RPC_RFSP, pef2256_rp_groups), + + PEF2256_FUNCTION("SYPX", PEF2256_12_PC_XPC_SYPX, pef2256_xp_groups), + PEF2256_FUNCTION("XFMS", PEF2256_12_PC_XPC_XFMS, pef2256_xp_groups), + PEF2256_FUNCTION("XSIG", PEF2256_12_PC_XPC_XSIG, pef2256_xp_groups), + PEF2256_FUNCTION("TCLK", PEF2256_12_PC_XPC_TCLK, pef2256_xp_groups), + PEF2256_FUNCTION("XMFB", PEF2256_12_PC_XPC_XMFB, pef2256_xp_groups), + PEF2256_FUNCTION("XSIGM", PEF2256_12_PC_XPC_XSIGM, pef2256_xp_groups), + PEF2256_FUNCTION("DLX", PEF2256_12_PC_XPC_DLX, pef2256_xp_groups), + PEF2256_FUNCTION("XCLK", PEF2256_12_PC_XPC_XCLK, pef2256_xp_groups), + PEF2256_FUNCTION("XLT", PEF2256_12_PC_XPC_XLT, pef2256_xp_groups), +}; + +static int pef2256_register_pinctrl(struct pef2256_pinctrl *pef2256) +{ + struct pinctrl_dev *pctrl; + + pef2256->pctrl_desc.name = dev_name(pef2256->dev); + pef2256->pctrl_desc.owner = THIS_MODULE; + pef2256->pctrl_desc.pctlops = &pef2256_pctlops; + pef2256->pctrl_desc.pmxops = &pef2256_pmxops; + if (pef2256->version == PEF2256_VERSION_1_2) { + pef2256->pctrl_desc.pins = pef2256_v12_pins; + pef2256->pctrl_desc.npins = ARRAY_SIZE(pef2256_v12_pins); + pef2256->functions = pef2256_v12_functions; + pef2256->nfunctions = ARRAY_SIZE(pef2256_v12_functions); + } else { + pef2256->pctrl_desc.pins = pef2256_v2x_pins; + pef2256->pctrl_desc.npins = ARRAY_SIZE(pef2256_v2x_pins); + pef2256->functions = pef2256_v2x_functions; + pef2256->nfunctions = ARRAY_SIZE(pef2256_v2x_functions); + } + + pctrl = devm_pinctrl_register(pef2256->dev, &pef2256->pctrl_desc, pef2256); + if (IS_ERR(pctrl)) + return dev_err_probe(pef2256->dev, PTR_ERR(pctrl), + "pinctrl driver registration failed\n"); + + return 0; +} + +static void pef2256_reset_pinmux(struct pef2256_pinctrl *pef2256) +{ + u8 val; + /* + * Reset values cannot be used. + * They define the SYPR/SYPX pin mux for all the RPx and XPx pins and + * Only one pin can be muxed to SYPR and one pin can be muxed to SYPX. + * Choose here an other reset value. + */ + if (pef2256->version == PEF2256_VERSION_1_2) + val = PEF2256_12_PC_XPC_XCLK | PEF2256_12_PC_RPC_RFSP; + else + val = PEF2256_2X_PC_XPC_GPI | PEF2256_2X_PC_RPC_GPI; + + regmap_write(pef2256->regmap, PEF2256_PC1, val); + regmap_write(pef2256->regmap, PEF2256_PC2, val); + regmap_write(pef2256->regmap, PEF2256_PC3, val); + regmap_write(pef2256->regmap, PEF2256_PC4, val); +} + +static int pef2256_pinctrl_probe(struct platform_device *pdev) +{ + struct pef2256_pinctrl *pef2256_pinctrl; + struct pef2256 *pef2256; + int ret; + + pef2256_pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pef2256_pinctrl), GFP_KERNEL); + if (!pef2256_pinctrl) + return -ENOMEM; + + device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent)); + + pef2256 = dev_get_drvdata(pdev->dev.parent); + + pef2256_pinctrl->dev = &pdev->dev; + pef2256_pinctrl->regmap = pef2256_get_regmap(pef2256); + pef2256_pinctrl->version = pef2256_get_version(pef2256); + + platform_set_drvdata(pdev, pef2256_pinctrl); + + pef2256_reset_pinmux(pef2256_pinctrl); + ret = pef2256_register_pinctrl(pef2256_pinctrl); + if (ret) + return ret; + + return 0; +} + +static struct platform_driver pef2256_pinctrl_driver = { + .driver = { + .name = "lantiq-pef2256-pinctrl", + }, + .probe = pef2256_pinctrl_probe, +}; +module_platform_driver(pef2256_pinctrl_driver); + +MODULE_AUTHOR("Herve Codina "); +MODULE_DESCRIPTION("PEF2256 pin controller driver"); +MODULE_LICENSE("GPL"); From patchwork Tue Nov 28 13:25:34 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13471143 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="ZHH+oPqk" Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ED6E0DA; Tue, 28 Nov 2023 05:25:44 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPA id CB86C60003; Tue, 28 Nov 2023 13:25:42 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1701177943; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=n9MGtTd8XXzFKz9pLqFK27LE2yY8oTJdvvi1+jcO4EM=; b=ZHH+oPqkvylLDl6sE4sM+u3jOkb1yvZgd9pTWo0Bm3mOZYlN4/YgfukondWQf1zNdHQ+5U 0X388m4rZLlVMIiVY1dgjDO+Y0pQ4MliFKQCT+0gdMtlMomm2hDNDYc7DYB66cCnSFA68W aUuRt1jZvkcPpeCqOGVuIhYHyYMZI/0jQd5CqIfRBZZkgkYaTa/nIbXJJ3EHBdxM8UBbn3 N9CiKwx1yqjAhS06VPCWbnm+himK1Z1hYo6fOLBTSUGHlYp/R2qQT2qdC2X0zP/qzYCORZ i51pgqcWJHMSywlCVcb4Szui/ZP7+bIQslZFwTWW6r6gLrGjOt3kpWVDrSdUVA== From: Herve Codina To: Herve Codina , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Andrew Lunn , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Linus Walleij , Liam Girdwood , Mark Brown Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Christophe Leroy , Thomas Petazzoni Subject: [PATCH 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry Date: Tue, 28 Nov 2023 14:25:34 +0100 Message-ID: <20231128132534.258459-6-herve.codina@bootlin.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231128132534.258459-1-herve.codina@bootlin.com> References: <20231128132534.258459-1-herve.codina@bootlin.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: herve.codina@bootlin.com After contributing the driver, add myself as the maintainer for the Lantiq PEF2256 driver. Signed-off-by: Herve Codina Reviewed-by: Christophe Leroy --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..1e3f4f34ce69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12028,6 +12028,14 @@ S: Maintained F: arch/mips/lantiq F: drivers/soc/lantiq +LANTIQ PEF2256 DRIVER +M: Herve Codina +S: Maintained +F: Documentation/devicetree/bindings/net/lantiq,pef2256.yaml +F: drivers/net/wan/framer/pef2256/ +F: drivers/pinctrl/pinctrl-pef2256.c +F: include/linux/framer/pef2256.h + LASI 53c700 driver for PARISC M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org