From patchwork Thu Dec 21 12:28:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501777 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 368DBC35274 for ; Thu, 21 Dec 2023 12:30:08 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 14B4B10E368; Thu, 21 Dec 2023 12:30:07 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by gabe.freedesktop.org (Postfix) with ESMTPS id 1689D10E378 for ; Thu, 21 Dec 2023 12:30:00 +0000 (UTC) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL8jmp9012041; Thu, 21 Dec 2023 13:29:44 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=wAIVUm7V9taORVR8870mPd+pd5ISYdF2B1dtf5GRRcM=; b=Pa GWNHDXB5Vt/DAgoCLOc1N0/3qJczcw8uqM5c3beox1b8VQEeJCxSE1VthQImjiIA Ltg5amjelWCY76L+bGWKTcg7DhVul4fBnjCVLFhd4iaaIZVIns1/ERl0LvpkTyax 5kf/v780uB33m9fzjeN+BYcPMrOMqY+xT3bJCPq0YEMiPxmIeUjRNVKjFAZRURr+ +WeYXPLJl+od99Wdil+vxDIDSM8dim2JdT9PSdsmVfamJdidVQ7iP0rrXMhPzekf rLfGf0R/SlsnjgNQjlJR0nQu8IdiAYBbsm70K86cXokzrg3EPtIzg2wtWNauHR2K N8xbglVL6OcUlcVpADqw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v13nhq55d-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:29:44 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 65DFB100053; Thu, 21 Dec 2023 13:29:42 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 82EFA208006; Thu, 21 Dec 2023 13:29:41 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:29:40 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 1/8] dt-bindings: panel: lvds: Append edt, etml0700z9ndha in panel-lvds Date: Thu, 21 Dec 2023 13:28:36 +0100 Message-ID: <20231221122843.418650-2-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> References: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" List EDT ETML0700Z9NDHA in the LVDS panel enumeration. Signed-off-by: Raphael Gallais-Pou --- Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 9f1016551e0b..3fb24393529c 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -42,6 +42,8 @@ properties: - auo,b101ew05 # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel - chunghwa,claa070wp03xg + # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel + - edt,etml0700z9ndha # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - hannstar,hsd101pww2 # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel From patchwork Thu Dec 21 12:28:37 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501778 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 02B50C35274 for ; Thu, 21 Dec 2023 12:30:13 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 2996710E378; Thu, 21 Dec 2023 12:30:13 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by gabe.freedesktop.org (Postfix) with ESMTPS id 647E110E6AB for ; Thu, 21 Dec 2023 12:30:03 +0000 (UTC) Received: from pps.filterd (m0369458.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL8YIDr028789; Thu, 21 Dec 2023 13:29:46 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=xJ81R9NAdDJJiqPYazGrWf5dZ1/fmMyctvdLKM1z2P0=; b=nZ YdRje7xbq5Ki0glAOqYQP/3/+tMdRO0DbtczBILnRbAXC0z2G7xPGH9STomR2mW1 BbWeIJg98kI7bS17JjukNNt1/4sc6m4e1H/UonO+t2gFQkbsJR9kVG3R/ybHdsAn jklAGTUhgtprtp/ouBpwq8VYXqwAMuTycKvLnHh09Fg3Vty0NWucqnv0h9boR8ei GmStFt1VeHK37lbXBTRMqOP0Mh1/88Cdcczp8BVpKXndq7cEklqsATExnRf5vCFz evlzVlB4gJAVMmv4uCDuxMb2otZaV3zcS0KCXsrGA19NjgQMbl1i+yptS6vd3Mup k0YeQYSdiOI10EdwSpLQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v4hyh99k6-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:29:45 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 4B35110005F; Thu, 21 Dec 2023 13:29:44 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 3EB8D208006; Thu, 21 Dec 2023 13:29:44 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:29:43 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 2/8] dt-bindings: display: add dt-bindings for STM32 LVDS device Date: Thu, 21 Dec 2023 13:28:37 +0100 Message-ID: <20231221122843.418650-3-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> References: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Add dt-binding file for "st,stm32-lvds" compatible. Signed-off-by: Raphael Gallais-Pou --- .../bindings/display/st,stm32-lvds.yaml | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-lvds.yaml diff --git a/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml new file mode 100644 index 000000000000..d72c9088133c --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 LVDS Display Interface Transmitter + +maintainers: + - Raphael Gallais-Pou + - Yannick Fertre + +description: | + The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the + LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC) + onto the LVDS PHY. + + It regroups three sub blocks: + - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input + pixels onto the data lanes of the PHY + - LVDS PHY: parallelize the data and drives the LVDS data lanes + - LVDS wrapper: handles top-level settings + + The LVDS controller driver supports the following high-level features: + - FDP-Link-I and OpenLDI (v0.95) protocols + - Single-Link or Dual-Link operation + - Single-Display or Double-Display (with the same content duplicated on both) + - Flexible Bit-Mapping, including JEIDA and VESA + - RGB888 or RGB666 output + - Synchronous design, with one input pixel per clock cycle + +properties: + "#clock-cells": + const: 0 + + compatible: + const: st,stm32-lvds + + reg: + maxItems: 1 + + clocks: + items: + - description: APB peripheral clock + - description: Reference clock for the internal PLL + + clock-names: + items: + - const: pclk + - const: ref + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + LVDS input port node, connected to the LTDC RGB output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + LVDS output port node, connected to a panel or bridge input port. + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - ports + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + lvds: lvds@48060000 { + #clock-cells = <0>; + compatible = "st,stm32-lvds"; + reg = <0x48060000 0x2000>; + clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>; + clock-names = "pclk", "ref"; + resets = <&rcc LVDS_R>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out0: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + +... From patchwork Thu Dec 21 12:28:38 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501780 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 11FF9C35274 for ; Thu, 21 Dec 2023 12:30:21 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 38ABC10E666; Thu, 21 Dec 2023 12:30:20 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by gabe.freedesktop.org (Postfix) with ESMTPS id 2B94C10E666 for ; Thu, 21 Dec 2023 12:30:13 +0000 (UTC) Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL8CpxS025683; Thu, 21 Dec 2023 13:29:53 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-type:content-transfer-encoding; s= selector1; bh=86yepIwXHm4ntwht35V68kcONgssTMOMrEHKykYkE6w=; b=aG 8AjUDRjkw7m2jR4rO6jRAFOqAM/bp4BU9vh2wXp+If6vfUyHTEvi1tyT2WNzIZT6 i6bdajESvrdTc34fCw540YkIyHs5umRTnpbwmjj8z5vi/XcOMUCJDKf5W8+fJfh+ NxV435I1Eku5WcU/TzMFRb0CBO/f+JXR8Lv8tfGi805EcwU0iaLQ+y/WJ9NnCsmm 19WZI/d0z7HM2azmhdWWHpeIscb2c3lXFiCIL1S9kjomoGWZxs4fhvc6IBZ8UGtM evnP1QSJf+VGSXIFlxWREpbPlz+oPRKiX7JLEmLr8XMJ3MR27/1ModCzElYfm99C w6/R1NB5gh6SESWIAyWg== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v14427gkw-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:29:53 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 4E8CB100053; Thu, 21 Dec 2023 13:29:49 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 4266123C699; Thu, 21 Dec 2023 13:29:49 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:29:46 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 3/8] drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver Date: Thu, 21 Dec 2023 13:28:38 +0100 Message-ID: <20231221122843.418650-4-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> References: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" The Low-Voltage Differential Signaling (LVDS) Display Interface Transmitter handles the LVDS protocol: it maps the pixels received from the upstream Pixel-DMA LCD-TFT Display Controller (LTDC) onto the LVDS PHY. It regroups three sub blocks: * LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input pixels onto the data lanes of the PHY * LVDS PHY: parallelize the data and drives the LVDS data lanes * LVDS wrapper: handles top-level settings The LVDS controller driver supports the following high-level features: * FDP-Link-I and OpenLDI (v0.95) protocols * Single-Link or Dual-Link operation * Single-Display or Double-Display (with the same content duplicated on both) * Flexible Bit-Mapping, including JEIDA and VESA * RGB888 or RGB666 output * Synchronous design, with one input pixel per clock cycle Signed-off-by: Raphael Gallais-Pou --- drivers/gpu/drm/stm/Kconfig | 11 + drivers/gpu/drm/stm/Makefile | 2 + drivers/gpu/drm/stm/lvds.c | 1226 ++++++++++++++++++++++++++++++++++ 3 files changed, 1239 insertions(+) create mode 100644 drivers/gpu/drm/stm/lvds.c diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig index fa49cde43bb2..9627814d027c 100644 --- a/drivers/gpu/drm/stm/Kconfig +++ b/drivers/gpu/drm/stm/Kconfig @@ -20,3 +20,14 @@ config DRM_STM_DSI select DRM_DW_MIPI_DSI help Choose this option for MIPI DSI support on STMicroelectronics SoC. + +config DRM_STM_LVDS + tristate "STMicroelectronics LVDS Display Interface Transmitter DRM driver" + depends on DRM_STM + help + Enable support for LVDS encoders on STMicroelectronics SoC. + The STM LVDS is a bridge which serialize pixel stream onto + a LVDS protocol. + + To compile this driver as a module, choose M here: the module will be + called lvds. diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile index 4df5caf01f35..ad740d6175a6 100644 --- a/drivers/gpu/drm/stm/Makefile +++ b/drivers/gpu/drm/stm/Makefile @@ -5,4 +5,6 @@ stm-drm-y := \ obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o +obj-$(CONFIG_DRM_STM_LVDS) += lvds.o + obj-$(CONFIG_DRM_STM) += stm-drm.o diff --git a/drivers/gpu/drm/stm/lvds.c b/drivers/gpu/drm/stm/lvds.c new file mode 100644 index 000000000000..f01490939ab5 --- /dev/null +++ b/drivers/gpu/drm/stm/lvds.c @@ -0,0 +1,1226 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + * Author(s): Raphaël GALLAIS-POU for STMicroelectronics. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* LVDS Host registers */ +#define LVDS_CR 0x0000 /* configuration register */ +#define LVDS_DMLCR0 0x0004 /* data mapping lsb configuration register 0 */ +#define LVDS_DMMCR0 0x0008 /* data mapping msb configuration register 0 */ +#define LVDS_DMLCR1 0x000C /* data mapping lsb configuration register 1 */ +#define LVDS_DMMCR1 0x0010 /* data mapping msb configuration register 1 */ +#define LVDS_DMLCR2 0x0014 /* data mapping lsb configuration register 2 */ +#define LVDS_DMMCR2 0x0018 /* data mapping msb configuration register 2 */ +#define LVDS_DMLCR3 0x001C /* data mapping lsb configuration register 3 */ +#define LVDS_DMMCR3 0x0020 /* data mapping msb configuration register 3 */ +#define LVDS_DMLCR4 0x0024 /* data mapping lsb configuration register 4 */ +#define LVDS_DMMCR4 0x0028 /* data mapping msb configuration register 4 */ +#define LVDS_CDL1CR 0x002C /* channel distrib link 1 configuration register */ +#define LVDS_CDL2CR 0x0030 /* channel distrib link 2 configuration register */ + +#define CDL1CR_DEFAULT 0x04321 /* Default value for CDL1CR */ +#define CDL2CR_DEFAULT 0x59876 /* Default value for CDL2CR */ + +#define LVDS_DMLCR(bit) (LVDS_DMLCR0 + 0x8 * (bit)) +#define LVDS_DMMCR(bit) (LVDS_DMMCR0 + 0x8 * (bit)) + +/* LVDS Wrapper registers */ +#define LVDS_WCLKCR 0x11B0 /* Wrapper clock control register */ + +#define LVDS_HWCFGR 0x1FF0 /* HW configuration register */ +#define LVDS_VERR 0x1FF4 /* Version register */ +#define LVDS_IPIDR 0x1FF8 /* Identification register */ +#define LVDS_SIDR 0x1FFC /* Size Identification register */ + +/* Bitfield description */ +#define CR_LVDSEN BIT(0) /* LVDS PHY Enable */ +#define CR_HSPOL BIT(1) /* Horizontal Synchronization Polarity */ +#define CR_VSPOL BIT(2) /* Vertical Synchronization Polarity */ +#define CR_DEPOL BIT(3) /* Data Enable Polarity */ +#define CR_CI BIT(4) /* Control Internal (software controlled bit) */ +#define CR_LKMOD BIT(5) /* Link Mode, for both Links */ +#define CR_LKPHA BIT(6) /* Link Phase, for both Links */ +#define CR_LK1POL GENMASK(20, 16) /* Link-1 output Polarity */ +#define CR_LK2POL GENMASK(25, 21) /* Link-2 output Polarity */ + +#define DMMCRx_MAP0 GENMASK(4, 0) /* Mapping for bit 0 of datalane x */ +#define DMMCRx_MAP1 GENMASK(9, 5) /* Mapping for bit 1 of datalane x */ +#define DMMCRx_MAP2 GENMASK(14, 10) /* Mapping for bit 2 of datalane x */ +#define DMMCRx_MAP3 GENMASK(19, 15) /* Mapping for bit 3 of datalane x */ +#define DMLCRx_MAP4 GENMASK(4, 0) /* Mapping for bit 4 of datalane x */ +#define DMLCRx_MAP5 GENMASK(9, 5) /* Mapping for bit 5 of datalane x */ +#define DMLCRx_MAP6 GENMASK(14, 10) /* Mapping for bit 6 of datalane x */ + +#define CDLCRx_DISTR0 GENMASK(3, 0) /* Channel distribution for lane 0 */ +#define CDLCRx_DISTR1 GENMASK(7, 4) /* Channel distribution for lane 1 */ +#define CDLCRx_DISTR2 GENMASK(11, 8) /* Channel distribution for lane 2 */ +#define CDLCRx_DISTR3 GENMASK(15, 12) /* Channel distribution for lane 3 */ +#define CDLCRx_DISTR4 GENMASK(19, 16) /* Channel distribution for lane 4 */ + +#define PHY_GCR_BIT_CLK_OUT BIT(0) /* BIT clock enable */ +#define PHY_GCR_LS_CLK_OUT BIT(4) /* LS clock enable */ +#define PHY_GCR_DP_CLK_OUT BIT(8) /* DP clock enable */ +#define PHY_GCR_RSTZ BIT(24) /* LVDS PHY digital reset */ +#define PHY_GCR_DIV_RSTN BIT(25) /* Output divider reset */ +#define PHY_SCR_TX_EN BIT(16) /* Transmission mode enable */ +/* Current mode driver enable */ +#define PHY_CMCR_CM_EN_DL (BIT(28) | BIT(20) | BIT(12) | BIT(4)) +#define PHY_CMCR_CM_EN_DL4 BIT(4) +/* Bias enable */ +#define PHY_BCR1_EN_BIAS_DL (BIT(16) | BIT(12) | BIT(8) | BIT(4) | BIT(0)) +#define PHY_BCR2_BIAS_EN BIT(28) +/* Voltage mode driver enable */ +#define PHY_BCR3_VM_EN_DL (BIT(16) | BIT(12) | BIT(8) | BIT(4) | BIT(0)) +#define PHY_DCR_POWER_OK BIT(12) +#define PHY_CFGCR_EN_DIG_DL GENMASK(4, 0) /* LVDS PHY digital lane enable */ +#define PHY_PLLCR1_PLL_EN BIT(0) /* LVDS PHY PLL enable */ +#define PHY_PLLCR1_EN_SD BIT(1) /* LVDS PHY PLL sigma-delta signal enable */ +#define PHY_PLLCR1_EN_TWG BIT(2) /* LVDS PHY PLL triangular wave generator enable */ +#define PHY_PLLCR1_DIV_EN BIT(8) /* LVDS PHY PLL dividers enable */ +#define PHY_PLLCR2_NDIV GENMASK(25, 16) /* NDIV mask value */ +#define PHY_PLLCR2_BDIV GENMASK(9, 0) /* BDIV mask value */ +#define PHY_PLLSR_PLL_LOCK BIT(0) /* LVDS PHY PLL lock status */ +#define PHY_PLLSDCR1_MDIV GENMASK(9, 0) /* MDIV mask value */ +#define PHY_PLLTESTCR_TDIV GENMASK(25, 16) /* TDIV mask value */ +#define PHY_PLLTESTCR_CLK_EN BIT(0) /* Test clock enable */ +#define PHY_PLLTESTCR_EN BIT(8) /* Test divider output enable */ + +#define WCLKCR_SECND_CLKPIX_SEL BIT(0) /* Pixel clock selection */ +#define WCLKCR_SRCSEL BIT(8) /* Source selection for the pixel clock */ + +/* Sleep & timeout for pll lock/unlock */ +#define SLEEP_US 1000 +#define TIMEOUT_US 200000 + +/* + * The link phase defines whether an ODD pixel is carried over together with + * the next EVEN pixel or together with the previous EVEN pixel. + * + * LVDS_DUAL_LINK_EVEN_ODD_PIXELS (LKPHA = 0) + * + * ,--------. ,--------. ,--------. ,--------. ,---------. + * | ODD LK \/ PIXEL 3 \/ PIXEL 1 \/ PIXEL' 1 \/ PIXEL' 3 | + * | EVEN LK /\ PIXEL 2 /\ PIXEL' 0 /\ PIXEL' 2 /\ PIXEL' 4 | + * `--------' `--------' `--------' `--------' `---------' + * + * LVDS_DUAL_LINK_ODD_EVEN_PIXELS (LKPHA = 1) + * + * ,--------. ,--------. ,--------. ,--------. ,---------. + * | ODD LK \/ PIXEL 3 \/ PIXEL 1 \/ PIXEL' 1 \/ PIXEL' 3 | + * | EVEN LK /\ PIXEL 4 /\ PIXEL 2 /\ PIXEL' 0 /\ PIXEL' 2 | + * `--------' `--------' `--------' `--------' `---------' + * + */ +enum lvds_link_type { + LVDS_SINGLE_LINK_PRIMARY = 0, + LVDS_SINGLE_LINK_SECONDARY, + LVDS_DUAL_LINK_EVEN_ODD_PIXELS, + LVDS_DUAL_LINK_ODD_EVEN_PIXELS, +}; + +enum lvds_pixel { + PIX_R_0 = 0, + PIX_R_1, + PIX_R_2, + PIX_R_3, + PIX_R_4, + PIX_R_5, + PIX_R_6, + PIX_R_7, + PIX_G_0, + PIX_G_1, + PIX_G_2, + PIX_G_3, + PIX_G_4, + PIX_G_5, + PIX_G_6, + PIX_G_7, + PIX_B_0, + PIX_B_1, + PIX_B_2, + PIX_B_3, + PIX_B_4, + PIX_B_5, + PIX_B_6, + PIX_B_7, + PIX_H_S, + PIX_V_S, + PIX_D_E, + PIX_C_E, + PIX_C_I, + PIX_TOG, + PIX_ONE, + PIX_ZER, +}; + +struct phy_reg_offsets { + u32 GCR; /* Global Control Register */ + u32 CMCR1; /* Current Mode Control Register 1 */ + u32 CMCR2; /* Current Mode Control Register 2 */ + u32 SCR; /* Serial Control Register */ + u32 BCR1; /* Bias Control Register 1 */ + u32 BCR2; /* Bias Control Register 2 */ + u32 BCR3; /* Bias Control Register 3 */ + u32 MPLCR; /* Monitor PLL Lock Control Register */ + u32 DCR; /* Debug Control Register */ + u32 SSR1; /* Spare Status Register 1 */ + u32 CFGCR; /* Configuration Control Register */ + u32 PLLCR1; /* PLL_MODE 1 Control Register */ + u32 PLLCR2; /* PLL_MODE 2 Control Register */ + u32 PLLSR; /* PLL Status Register */ + u32 PLLSDCR1; /* PLL_SD_1 Control Register */ + u32 PLLSDCR2; /* PLL_SD_2 Control Register */ + u32 PLLTWGCR1;/* PLL_TWG_1 Control Register */ + u32 PLLTWGCR2;/* PLL_TWG_2 Control Register */ + u32 PLLCPCR; /* PLL_CP Control Register */ + u32 PLLTESTCR;/* PLL_TEST Control Register */ +}; + +struct lvds_phy_info { + u32 base; + struct phy_reg_offsets ofs; +}; + +static struct lvds_phy_info lvds_phy_16ff_primary = { + .base = 0x1000, + .ofs = { + .GCR = 0x0, + .CMCR1 = 0xC, + .CMCR2 = 0x10, + .SCR = 0x20, + .BCR1 = 0x2C, + .BCR2 = 0x30, + .BCR3 = 0x34, + .MPLCR = 0x64, + .DCR = 0x84, + .SSR1 = 0x88, + .CFGCR = 0xA0, + .PLLCR1 = 0xC0, + .PLLCR2 = 0xC4, + .PLLSR = 0xC8, + .PLLSDCR1 = 0xCC, + .PLLSDCR2 = 0xD0, + .PLLTWGCR1 = 0xD4, + .PLLTWGCR2 = 0xD8, + .PLLCPCR = 0xE0, + .PLLTESTCR = 0xE8, + } +}; + +static struct lvds_phy_info lvds_phy_16ff_secondary = { + .base = 0x1100, + .ofs = { + .GCR = 0x0, + .CMCR1 = 0xC, + .CMCR2 = 0x10, + .SCR = 0x20, + .BCR1 = 0x2C, + .BCR2 = 0x30, + .BCR3 = 0x34, + .MPLCR = 0x64, + .DCR = 0x84, + .SSR1 = 0x88, + .CFGCR = 0xA0, + .PLLCR1 = 0xC0, + .PLLCR2 = 0xC4, + .PLLSR = 0xC8, + .PLLSDCR1 = 0xCC, + .PLLSDCR2 = 0xD0, + .PLLTWGCR1 = 0xD4, + .PLLTWGCR2 = 0xD8, + .PLLCPCR = 0xE0, + .PLLTESTCR = 0xE8, + } +}; + +struct stm_lvds { + void __iomem *base; + struct device *dev; + struct clk *pclk; /* APB peripheral clock */ + struct clk *pllref_clk; /* Reference clock for the internal PLL */ + struct clk_hw lvds_ck_px; /* Pixel clock */ + u32 pixel_clock_rate; /* Pixel clock rate */ + + struct lvds_phy_info *primary; + struct lvds_phy_info *secondary; + + struct drm_bridge lvds_bridge; + struct drm_bridge *next_bridge; + struct drm_connector connector; + struct drm_encoder *encoder; + struct drm_panel *panel; + + u32 hw_version; + u32 link_type; +}; + +#define bridge_to_stm_lvds(b) \ + container_of(b, struct stm_lvds, lvds_bridge) + +#define connector_to_stm_lvds(c) \ + container_of(c, struct stm_lvds, connector) + +#define lvds_is_dual_link(lvds) \ + ({ \ + typeof(lvds) __lvds = (lvds); \ + __lvds == LVDS_DUAL_LINK_EVEN_ODD_PIXELS || \ + __lvds == LVDS_DUAL_LINK_ODD_EVEN_PIXELS; \ + }) + +static inline void lvds_write(struct stm_lvds *lvds, u32 reg, u32 val) +{ + writel(val, lvds->base + reg); +} + +static inline u32 lvds_read(struct stm_lvds *lvds, u32 reg) +{ + return readl(lvds->base + reg); +} + +static inline void lvds_set(struct stm_lvds *lvds, u32 reg, u32 mask) +{ + lvds_write(lvds, reg, lvds_read(lvds, reg) | mask); +} + +static inline void lvds_clear(struct stm_lvds *lvds, u32 reg, u32 mask) +{ + lvds_write(lvds, reg, lvds_read(lvds, reg) & ~mask); +} + +/* + * Expected JEIDA-RGB888 data to be sent in LSB format + * bit6 ............................bit0 + * CHAN0 {ONE, ONE, ZERO, ZERO, ZERO, ONE, ONE} + * CHAN1 {G2, R7, R6, R5, R4, R3, R2} + * CHAN2 {B3, B2, G7, G6, G5, G4, G3} + * CHAN3 {DE, VS, HS, B7, B6, B5, B4} + * CHAN4 {CE, B1, B0, G1, G0, R1, R0} + */ +enum lvds_pixel lvds_bitmap_jeida_rgb888[5][7] = { + { PIX_ONE, PIX_ONE, PIX_ZER, PIX_ZER, PIX_ZER, PIX_ONE, PIX_ONE }, + { PIX_G_2, PIX_R_7, PIX_R_6, PIX_R_5, PIX_R_4, PIX_R_3, PIX_R_2 }, + { PIX_B_3, PIX_B_2, PIX_G_7, PIX_G_6, PIX_G_5, PIX_G_4, PIX_G_3 }, + { PIX_D_E, PIX_V_S, PIX_H_S, PIX_B_7, PIX_B_6, PIX_B_5, PIX_B_4 }, + { PIX_C_E, PIX_B_1, PIX_B_0, PIX_G_1, PIX_G_0, PIX_R_1, PIX_R_0 } +}; + +/* + * Expected VESA-RGB888 data to be sent in LSB format + * bit6 ............................bit0 + * CHAN0 {ONE, ONE, ZERO, ZERO, ZERO, ONE, ONE} + * CHAN1 {G0, R5, R4, R3, R2, R1, R0} + * CHAN2 {B1, B0, G5, G4, G3, G2, G1} + * CHAN3 {DE, VS, HS, B5, B4, B3, B2} + * CHAN4 {CE, B7, B6, G7, G6, R7, R6} + */ +enum lvds_pixel lvds_bitmap_vesa_rgb888[5][7] = { + { PIX_ONE, PIX_ONE, PIX_ZER, PIX_ZER, PIX_ZER, PIX_ONE, PIX_ONE }, + { PIX_G_0, PIX_R_5, PIX_R_4, PIX_R_3, PIX_R_2, PIX_R_1, PIX_R_0 }, + { PIX_B_1, PIX_B_0, PIX_G_5, PIX_G_4, PIX_G_3, PIX_G_2, PIX_G_1 }, + { PIX_D_E, PIX_V_S, PIX_H_S, PIX_B_5, PIX_B_4, PIX_B_3, PIX_B_2 }, + { PIX_C_E, PIX_B_7, PIX_B_6, PIX_G_7, PIX_G_6, PIX_R_7, PIX_R_6 } +}; + +/* + * Clocks and PHY related functions + */ +static int lvds_pll_enable(struct stm_lvds *lvds, struct lvds_phy_info *phy) +{ + struct drm_device *drm = lvds->lvds_bridge.dev; + u32 lvds_gcr; + int val, ret; + + /* + * PLL lock timing control for the monitor unmask after startup (pll_en) + * Adjusted value so that the masking window is opened at start-up + */ + lvds_write(lvds, phy->base + phy->ofs.MPLCR, (0x200 - 0x160) << 16); + + /* Enable bias */ + lvds_write(lvds, phy->base + phy->ofs.BCR2, PHY_BCR2_BIAS_EN); + + /* Enable DP, LS, BIT clock output */ + lvds_gcr = PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT; + lvds_set(lvds, phy->base + phy->ofs.GCR, lvds_gcr); + + /* Power up all output dividers */ + lvds_set(lvds, phy->base + phy->ofs.PLLTESTCR, PHY_PLLTESTCR_EN); + lvds_set(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_DIV_EN); + + /* Set PHY in serial transmission mode */ + lvds_set(lvds, phy->base + phy->ofs.SCR, PHY_SCR_TX_EN); + + /* Enable the LVDS PLL & wait for its lock */ + lvds_set(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_PLL_EN); + ret = readl_poll_timeout_atomic(lvds->base + phy->base + phy->ofs.PLLSR, + val, val & PHY_PLLSR_PLL_LOCK, + SLEEP_US, TIMEOUT_US); + if (ret) + drm_err(drm, "!TIMEOUT! waiting PLL, let's continue\n"); + + /* WCLKCR_SECND_CLKPIX_SEL is for dual link */ + lvds_write(lvds, LVDS_WCLKCR, WCLKCR_SECND_CLKPIX_SEL); + + lvds_set(lvds, phy->ofs.PLLTESTCR, PHY_PLLTESTCR_CLK_EN); + + return ret; +} + +static int pll_get_clkout_khz(int clkin_khz, int bdiv, int mdiv, int ndiv) +{ + int divisor = ndiv * bdiv; + + /* Prevents from division by 0 */ + if (!divisor) + return 0; + + return clkin_khz * mdiv / divisor; +} + +#define TDIV 70 +#define NDIV_MIN 2 +#define NDIV_MAX 6 +#define BDIV_MIN 2 +#define BDIV_MAX 6 +#define MDIV_MIN 1 +#define MDIV_MAX 1023 + +static int lvds_pll_get_params(struct stm_lvds *lvds, + unsigned int clkin_khz, unsigned int clkout_khz, + unsigned int *bdiv, unsigned int *mdiv, unsigned int *ndiv) +{ + int delta, best_delta; /* all in khz */ + int i, o, n; + + /* Early checks preventing division by 0 & odd results */ + if (clkin_khz <= 0 || clkout_khz <= 0) + return -EINVAL; + + best_delta = 1000000; /* big started value (1000000khz) */ + + for (i = NDIV_MIN; i <= NDIV_MAX; i++) { + for (o = BDIV_MIN; o <= BDIV_MAX; o++) { + n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz); + /* Check ndiv according to vco range */ + if (n < MDIV_MIN || n > MDIV_MAX) + continue; + /* Check if new delta is better & saves parameters */ + delta = pll_get_clkout_khz(clkin_khz, i, n, o) - clkout_khz; + if (delta < 0) + delta = -delta; + if (delta < best_delta) { + *ndiv = i; + *mdiv = n; + *bdiv = o; + best_delta = delta; + } + /* fast return in case of "perfect result" */ + if (!delta) + return 0; + } + } + + return 0; +} + +static void lvds_pll_config(struct stm_lvds *lvds, struct lvds_phy_info *phy) +{ + unsigned int pll_in_khz, bdiv = 0, mdiv = 0, ndiv = 0; + struct clk_hw *hwclk; + int multiplier; + + /* + * The LVDS PHY includes a low power low jitter high performance and + * highly configuration Phase Locked Loop supporting integer and + * fractional multiplication ratios and Spread Spectrum Clocking. In + * integer mode, the only software supported feature for now, the PLL is + * made of a pre-divider NDIV, a feedback multiplier MDIV, followed by + * several post-dividers, each one with a specific application. + * + * ,------. ,-----. ,-----. + * Fref --> | NDIV | -Fpdf-> | PFD | --> | VCO | --------> Fvco + * `------' ,-> | | `-----' | + * | `-----' | + * | ,------. | + * `-------- | MDIV | <-----' + * `------' + * + * From the output of the VCO, the clock can be optionally extracted on + * the RCC clock observer, with a divider TDIV, for testing purpose, or + * is passed through a programmable post-divider BDIV. Finally, the + * frequency can be divided further with two fixed dividers. + * + * ,--------. + * ,-----> | DP div | ----------------> Fdp + * ,------. | `--------' + * Fvco --> | BDIV | ------------------------------------> Fbit + * | `------' ,------. | + * `-------------> | TDIV | --.---------------------> ClkObs + * '------' | ,--------. + * `--> | LS div | ------> Fls + * '--------' + * + * The LS and DP clock dividers operate at a fixed ratio of 7 and 3.5 + * respectively with regards to fbit. LS divider converts the bit clock + * to a pixel clock per lane per clock sample (Fls). This is useful + * when used to generate a dot clock for the display unit RGB output, + * and DP divider is. + */ + + hwclk = __clk_get_hw(lvds->pllref_clk); + if (!hwclk) + return; + + pll_in_khz = clk_hw_get_rate(hwclk) / 1000; + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + lvds_pll_get_params(lvds, pll_in_khz, + lvds->pixel_clock_rate * 7 / 1000 / multiplier, + &bdiv, &mdiv, &ndiv); + + /* Set BDIV, MDIV and NDIV */ + lvds_write(lvds, phy->base + phy->ofs.PLLCR2, ndiv << 16); + lvds_set(lvds, phy->base + phy->ofs.PLLCR2, bdiv); + lvds_write(lvds, phy->base + phy->ofs.PLLSDCR1, mdiv); + + /* Hardcode TDIV as dynamic values are not yet implemented */ + lvds_write(lvds, phy->base + phy->ofs.PLLTESTCR, TDIV << 16); + + /* + * For now, PLL just needs to be in integer mode + * Fractional and spread spectrum clocking are not yet implemented + * + * PLL integer mode: + * - PMRY_PLL_TWG_STEP = PMRY_PLL_SD_INT_RATIO + * - EN_TWG = 0 + * - EN_SD = 0 + * - DOWN_SPREAD = 0 + * + * PLL fractional mode: + * - EN_TWG = 0 + * - EN_SD = 1 + * - DOWN_SPREAD = 0 + * + * Spread Spectrum Clocking + * - EN_TWG = 1 + * - EN_SD = 1 + */ + + /* Disable TWG and SD */ + lvds_clear(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_EN_TWG | PHY_PLLCR1_EN_SD); + + /* Power up bias and PLL dividers */ + lvds_set(lvds, phy->base + phy->ofs.DCR, PHY_DCR_POWER_OK); + lvds_set(lvds, phy->base + phy->ofs.CMCR1, PHY_CMCR_CM_EN_DL); + lvds_set(lvds, phy->base + phy->ofs.CMCR2, PHY_CMCR_CM_EN_DL4); + + /* Set up voltage mode */ + lvds_set(lvds, phy->base + phy->ofs.PLLCPCR, 0x1); + lvds_set(lvds, phy->base + phy->ofs.BCR3, PHY_BCR3_VM_EN_DL); + lvds_set(lvds, phy->base + phy->ofs.BCR1, PHY_BCR1_EN_BIAS_DL); + /* Enable digital datalanes */ + lvds_set(lvds, phy->base + phy->ofs.CFGCR, PHY_CFGCR_EN_DIG_DL); +} + +static int lvds_pixel_clk_enable(struct clk_hw *hw) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + struct drm_device *drm = lvds->lvds_bridge.dev; + struct lvds_phy_info *phy; + int ret; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(drm, "Failed to enable lvds peripheral clk\n"); + return ret; + } + + ret = clk_prepare_enable(lvds->pllref_clk); + if (ret) { + drm_err(drm, "Failed to enable lvds reference clk\n"); + clk_disable_unprepare(lvds->pclk); + return ret; + } + + /* In case we are operating in dual link the second PHY is set before the primary PHY. */ + if (lvds->secondary) { + phy = lvds->secondary; + + /* Release LVDS PHY from reset mode */ + lvds_set(lvds, phy->base + phy->ofs.GCR, PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + lvds_pll_config(lvds, phy); + + ret = lvds_pll_enable(lvds, phy); + if (ret) { + drm_err(drm, "Failed to enable secondary PHY PLL: %d\n", ret); + return ret; + } + } + + if (lvds->primary) { + phy = lvds->primary; + + /* Release LVDS PHY from reset mode */ + lvds_set(lvds, phy->base + phy->ofs.GCR, PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + lvds_pll_config(lvds, phy); + + ret = lvds_pll_enable(lvds, phy); + if (ret) { + drm_err(drm, "Failed to enable primary PHY PLL: %d\n", ret); + return ret; + } + } + + return 0; +} + +static void lvds_pixel_clk_disable(struct clk_hw *hw) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + + /* + * For each PHY: + * Disable DP, LS, BIT clock outputs + * Shutdown the PLL + * Assert LVDS PHY in reset mode + */ + + if (lvds->primary) { + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.GCR, + (PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT)); + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.PLLCR1, + PHY_PLLCR1_PLL_EN); + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.GCR, + PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + } + + if (lvds->secondary) { + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.GCR, + (PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT)); + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.PLLCR1, + PHY_PLLCR1_PLL_EN); + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.GCR, + PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + } + + clk_disable_unprepare(lvds->pllref_clk); + clk_disable_unprepare(lvds->pclk); +} + +static unsigned long lvds_pixel_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + struct drm_device *drm = lvds->lvds_bridge.dev; + unsigned int pll_in_khz, bdiv, mdiv, ndiv; + int ret, multiplier, pll_out_khz; + u32 val; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(drm, "Failed to enable lvds peripheral clk\n"); + return 0; + } + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + val = lvds_read(lvds, lvds->primary->base + lvds->primary->ofs.PLLCR2); + drm_dbg(drm, "val = %08x\n", val); + + ndiv = (val & PHY_PLLCR2_NDIV) >> 16; + bdiv = (val & PHY_PLLCR2_BDIV) >> 0; + + mdiv = (unsigned int)lvds_read(lvds, + lvds->primary->base + lvds->primary->ofs.PLLSDCR1); + + pll_in_khz = (unsigned int)(parent_rate / 1000); + + /* Compute values if not yet accessible */ + if (val == 0 || mdiv == 0) { + lvds_pll_get_params(lvds, pll_in_khz, + lvds->pixel_clock_rate * 7 / 1000 / multiplier, + &bdiv, &mdiv, &ndiv); + } + + pll_out_khz = pll_get_clkout_khz(pll_in_khz, bdiv, mdiv, ndiv); + drm_dbg(drm, "ndiv %d , bdiv %d, mdiv %d, pll_out_khz %d\n", + ndiv, bdiv, mdiv, pll_out_khz); + + /* + * 1/7 because for each pixel in 1 lane there is 7 bits + * We want pixclk, not bitclk + */ + lvds->pixel_clock_rate = pll_out_khz * 1000 * multiplier / 7; + + clk_disable_unprepare(lvds->pclk); + + return (unsigned long)lvds->pixel_clock_rate; +} + +static long lvds_pixel_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + unsigned int pll_in_khz, bdiv = 0, mdiv = 0, ndiv = 0; + const struct drm_connector *connector; + const struct drm_display_mode *mode; + int multiplier; + + connector = &lvds->connector; + if (!connector) + return -EINVAL; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return -EINVAL; + } + + mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + pll_in_khz = (unsigned int)(*parent_rate / 1000); + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + lvds_pll_get_params(lvds, pll_in_khz, mode->clock * 7 / multiplier, &bdiv, &mdiv, &ndiv); + + /* + * 1/7 because for each pixel in 1 lane there is 7 bits + * We want pixclk, not bitclk + */ + lvds->pixel_clock_rate = (unsigned long)pll_get_clkout_khz(pll_in_khz, bdiv, mdiv, ndiv) + * 1000 * multiplier / 7; + + return lvds->pixel_clock_rate; +} + +static const struct clk_ops lvds_pixel_clk_ops = { + .enable = lvds_pixel_clk_enable, + .disable = lvds_pixel_clk_disable, + .recalc_rate = lvds_pixel_clk_recalc_rate, + .round_rate = lvds_pixel_clk_round_rate, +}; + +static const struct clk_init_data clk_data = { + .name = "clk_pix_lvds", + .ops = &lvds_pixel_clk_ops, + .parent_names = (const char * []) {"ck_ker_lvdsphy"}, + .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, +}; + +static void lvds_pixel_clk_unregister(void *data) +{ + struct stm_lvds *lvds = data; + + of_clk_del_provider(lvds->dev->of_node); + clk_hw_unregister(&lvds->lvds_ck_px); +} + +static int lvds_pixel_clk_register(struct stm_lvds *lvds) +{ + struct device_node *node = lvds->dev->of_node; + int ret; + + lvds->lvds_ck_px.init = &clk_data; + + /* set the rate by default at 148500000 */ + lvds->pixel_clock_rate = 148500000; + + ret = clk_hw_register(lvds->dev, &lvds->lvds_ck_px); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, + &lvds->lvds_ck_px); + if (ret) + clk_hw_unregister(&lvds->lvds_ck_px); + + return ret; +} + +/* + * Host configuration related + */ +static void lvds_config_data_mapping(struct stm_lvds *lvds) +{ + struct drm_device *drm = lvds->lvds_bridge.dev; + const struct drm_display_info *info; + enum lvds_pixel (*bitmap)[7]; + u32 lvds_dmlcr, lvds_dmmcr; + int i; + + info = &(&lvds->connector)->display_info; + if (!info->num_bus_formats || !info->bus_formats) { + drm_warn(drm, "No LVDS bus format reported\n"); + return; + } + + switch (info->bus_formats[0]) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: /* VESA-RGB666 */ + drm_warn(drm, "Pixel format with data mapping not yet supported.\n"); + return; + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: /* VESA-RGB888 */ + bitmap = lvds_bitmap_vesa_rgb888; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: /* JEIDA-RGB888 */ + bitmap = lvds_bitmap_jeida_rgb888; + break; + default: + drm_warn(drm, "Unsupported LVDS bus format 0x%04x\n", info->bus_formats[0]); + return; + } + + /* Set bitmap for each lane */ + for (i = 0; i < 5; i++) { + lvds_dmlcr = ((bitmap[i][0]) + + (bitmap[i][1] << 5) + + (bitmap[i][2] << 10) + + (bitmap[i][3] << 15)); + lvds_dmmcr = ((bitmap[i][4]) + + (bitmap[i][5] << 5) + + (bitmap[i][6] << 10)); + + lvds_write(lvds, LVDS_DMLCR(i), lvds_dmlcr); + lvds_write(lvds, LVDS_DMMCR(i), lvds_dmmcr); + } +} + +static void lvds_config_mode(struct stm_lvds *lvds) +{ + u32 bus_flags, lvds_cr = 0, lvds_cdl1cr = 0, lvds_cdl2cr = 0; + const struct drm_display_mode *mode; + const struct drm_connector *connector; + + connector = &lvds->connector; + if (!connector) + return; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return; + } + + bus_flags = connector->display_info.bus_flags; + mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + lvds_clear(lvds, LVDS_CR, CR_LKMOD); + lvds_clear(lvds, LVDS_CDL1CR, CDLCRx_DISTR0 | CDLCRx_DISTR1 | CDLCRx_DISTR2 | + CDLCRx_DISTR3 | CDLCRx_DISTR4); + lvds_clear(lvds, LVDS_CDL2CR, CDLCRx_DISTR0 | CDLCRx_DISTR1 | CDLCRx_DISTR2 | + CDLCRx_DISTR3 | CDLCRx_DISTR4); + + /* Set channel distribution */ + if (lvds->primary) + lvds_cdl1cr = CDL1CR_DEFAULT; + + if (lvds->secondary) { + lvds_cr |= CR_LKMOD; + lvds_cdl2cr = CDL2CR_DEFAULT; + } + + /* Set signal polarity */ + if (bus_flags & DRM_BUS_FLAG_DE_LOW) + lvds_cr |= CR_DEPOL; + + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_cr |= CR_HSPOL; + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_cr |= CR_VSPOL; + + switch (lvds->link_type) { + case LVDS_DUAL_LINK_EVEN_ODD_PIXELS: /* LKPHA = 0 */ + lvds_cr &= ~CR_LKPHA; + break; + case LVDS_DUAL_LINK_ODD_EVEN_PIXELS: /* LKPHA = 1 */ + lvds_cr |= CR_LKPHA; + break; + default: + drm_notice(lvds->lvds_bridge.dev, "No phase precised, setting default\n"); + lvds_cr &= ~CR_LKPHA; + break; + } + + /* Write config to registers */ + lvds_set(lvds, LVDS_CR, lvds_cr); + lvds_write(lvds, LVDS_CDL1CR, lvds_cdl1cr); + lvds_write(lvds, LVDS_CDL2CR, lvds_cdl2cr); +} + +static int lvds_connector_get_modes(struct drm_connector *connector) +{ + struct stm_lvds *lvds = connector_to_stm_lvds(connector); + + return drm_panel_get_modes(lvds->panel, connector); +} + +static int lvds_connector_atomic_check(struct drm_connector *connector, + struct drm_atomic_state *state) +{ + const struct drm_display_mode *panel_mode; + struct drm_connector_state *conn_state; + struct drm_crtc_state *crtc_state; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (!conn_state) + return -EINVAL; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return -EINVAL; + } + + if (!conn_state->crtc) + return -EINVAL; + + panel_mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + /* We're not allowed to modify the resolution. */ + crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (crtc_state->mode.hdisplay != panel_mode->hdisplay || + crtc_state->mode.vdisplay != panel_mode->vdisplay) + return -EINVAL; + + /* The flat panel mode is fixed, just copy it to the adjusted mode. */ + drm_mode_copy(&crtc_state->adjusted_mode, panel_mode); + + return 0; +} + +static const struct drm_connector_helper_funcs lvds_conn_helper_funcs = { + .get_modes = lvds_connector_get_modes, + .atomic_check = lvds_connector_atomic_check, +}; + +static const struct drm_connector_funcs lvds_conn_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int lvds_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + struct drm_connector *connector = &lvds->connector; + struct drm_encoder *encoder = bridge->encoder; + int ret; + + if (!bridge->encoder) { + drm_err(bridge->dev, "Parent encoder object not found\n"); + return -ENODEV; + } + + /* Set the encoder type as caller does not know it */ + bridge->encoder->encoder_type = DRM_MODE_ENCODER_LVDS; + + /* No cloning support */ + bridge->encoder->possible_clones = 0; + + /* If we have a next bridge just attach it. */ + if (lvds->next_bridge) + return drm_bridge_attach(bridge->encoder, lvds->next_bridge, + bridge, flags); + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + drm_err(bridge->dev, "Fix bridge driver to make connector optional!"); + return -EINVAL; + } + + /* Otherwise if we have a panel, create a connector. */ + if (!lvds->panel) + return 0; + + ret = drm_connector_init(bridge->dev, connector, + &lvds_conn_funcs, DRM_MODE_CONNECTOR_LVDS); + if (ret < 0) + return ret; + + drm_connector_helper_add(connector, &lvds_conn_helper_funcs); + + ret = drm_connector_attach_encoder(connector, encoder); + + return ret; +} + +static void lvds_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *state = old_bridge_state->base.state; + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + struct drm_connector_state *conn_state; + struct drm_connector *connector; + int ret; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(bridge->dev, "Failed to enable lvds peripheral clk\n"); + return; + } + + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); + if (!connector) + return; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (!conn_state) + return; + + lvds_config_mode(lvds); + + /* Set Data Mapping */ + lvds_config_data_mapping(lvds); + + /* Turn the output on. */ + lvds_set(lvds, LVDS_CR, CR_LVDSEN); + + if (lvds->panel) { + drm_panel_prepare(lvds->panel); + drm_panel_enable(lvds->panel); + } +} + +static void lvds_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + + if (lvds->panel) { + drm_panel_disable(lvds->panel); + drm_panel_unprepare(lvds->panel); + } + + /* Disable LVDS module */ + lvds_clear(lvds, LVDS_CR, CR_LVDSEN); + + clk_disable_unprepare(lvds->pclk); +} + +static const struct drm_bridge_funcs lvds_bridge_funcs = { + .attach = lvds_attach, + .atomic_enable = lvds_atomic_enable, + .atomic_disable = lvds_atomic_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, +}; + +static int lvds_probe(struct platform_device *pdev) +{ + struct device_node *port1, *port2, *remote; + struct device *dev = &pdev->dev; + struct reset_control *rstc; + struct stm_lvds *lvds; + int ret, dual_link; + + dev_dbg(dev, "Probing LVDS driver...\n"); + + lvds = devm_kzalloc(dev, sizeof(*lvds), GFP_KERNEL); + if (!lvds) + return -ENOMEM; + + lvds->dev = dev; + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, + &lvds->panel, &lvds->next_bridge); + if (ret) { + dev_err_probe(dev, ret, "Panel not found\n"); + return ret; + } + + lvds->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(lvds->base)) { + ret = PTR_ERR(lvds->base); + dev_err(dev, "Unable to get regs %d\n", ret); + return ret; + } + + lvds->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(lvds->pclk)) { + ret = PTR_ERR(lvds->pclk); + dev_err(dev, "Unable to get peripheral clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__); + return ret; + } + + rstc = devm_reset_control_get_exclusive(dev, NULL); + + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + goto err_lvds_probe; + } + + reset_control_assert(rstc); + usleep_range(10, 20); + reset_control_deassert(rstc); + + port1 = of_graph_get_port_by_id(dev->of_node, 1); + port2 = of_graph_get_port_by_id(dev->of_node, 2); + dual_link = drm_of_lvds_get_dual_link_pixel_order(port1, port2); + + switch (dual_link) { + case DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS: + lvds->link_type = LVDS_DUAL_LINK_ODD_EVEN_PIXELS; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = &lvds_phy_16ff_secondary; + break; + case DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS: + lvds->link_type = LVDS_DUAL_LINK_EVEN_ODD_PIXELS; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = &lvds_phy_16ff_secondary; + break; + case -EINVAL: + /* + * drm_of_lvds_get_dual_pixel_order returns 4 possible values. + * In the case where the returned value is an error, it can be + * either ENODEV or EINVAL. Seeing the structure of this + * function, EINVAL means that either port1 or port2 is not + * present in the device tree. + * In that case, the lvds panel can be a single link panel, or + * there is a semantical error in the device tree code. + */ + remote = of_get_next_available_child(port1, NULL); + if (remote) { + if (of_graph_get_remote_endpoint(remote)) { + lvds->link_type = LVDS_SINGLE_LINK_PRIMARY; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = NULL; + } else { + ret = -EINVAL; + } + + of_node_put(remote); + } + + remote = of_get_next_available_child(port2, NULL); + if (remote) { + if (of_graph_get_remote_endpoint(remote)) { + lvds->link_type = LVDS_SINGLE_LINK_SECONDARY; + lvds->primary = NULL; + lvds->secondary = &lvds_phy_16ff_secondary; + } else { + ret = (ret == -EINVAL) ? -EINVAL : 0; + } + + of_node_put(remote); + } + break; + default: + ret = -EINVAL; + goto err_lvds_probe; + } + of_node_put(port1); + of_node_put(port2); + + lvds->pllref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(lvds->pllref_clk)) { + ret = PTR_ERR(lvds->pllref_clk); + dev_err(dev, "Unable to get reference clock: %d\n", ret); + goto err_lvds_probe; + } + + ret = lvds_pixel_clk_register(lvds); + if (ret) { + dev_err(dev, "Failed to register LVDS pixel clock: %d\n", ret); + goto err_lvds_probe; + } + + lvds->lvds_bridge.funcs = &lvds_bridge_funcs; + lvds->lvds_bridge.of_node = dev->of_node; + lvds->hw_version = lvds_read(lvds, LVDS_VERR); + + dev_info(dev, "version 0x%02x initialized\n", lvds->hw_version); + + drm_bridge_add(&lvds->lvds_bridge); + + platform_set_drvdata(pdev, lvds); + + clk_disable_unprepare(lvds->pclk); + + return 0; + +err_lvds_probe: + clk_disable_unprepare(lvds->pclk); + + return ret; +} + +static int lvds_remove(struct platform_device *pdev) +{ + struct stm_lvds *lvds = platform_get_drvdata(pdev); + + lvds_pixel_clk_unregister(lvds); + + drm_bridge_remove(&lvds->lvds_bridge); + + return 0; +} + +static const struct of_device_id lvds_dt_ids[] = { + { + .compatible = "st,stm32-lvds", + .data = NULL + }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, lvds_dt_ids); + +static struct platform_driver lvds_platform_driver = { + .probe = lvds_probe, + .remove = lvds_remove, + .driver = { + .name = "stm32-display-lvds", + .owner = THIS_MODULE, + .of_match_table = lvds_dt_ids, + }, +}; + +module_platform_driver(lvds_platform_driver); + +MODULE_AUTHOR("Raphaël Gallais-Pou "); +MODULE_AUTHOR("Philippe Cornu "); +MODULE_AUTHOR("Yannick Fertre "); +MODULE_DESCRIPTION("STMicroelectronics LVDS Display Interface Transmitter DRM driver"); +MODULE_LICENSE("GPL"); From patchwork Thu Dec 21 12:28:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501779 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 4B91EC46CD3 for ; Thu, 21 Dec 2023 12:30:15 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 7090910E6AB; Thu, 21 Dec 2023 12:30:13 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by gabe.freedesktop.org (Postfix) with ESMTPS id C702F10E378 for ; Thu, 21 Dec 2023 12:30:11 +0000 (UTC) Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL91QIS020448; Thu, 21 Dec 2023 13:29:54 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=B5wcMGFh4CoqzFZs1z1bofbkFA+Gq4yfIFxfUXbmg0w=; b=KH CJ1BvsOmo2hZjg+eTlF3NZro65o0DPAYmJ5s58NnctVMokk0T8PRCSxgEMqwgkhG R7yNGbfX/VloQPcCJ476IWIE08TljR7r59d57DXGuySsjwKJdD/TETA92H2RXS8c bRC6AUCQmcP4KVHyReDGvRPfDaK02vworhxiUuaqV2euAA5gWKouYBcoAGTblxkG klkVD7PHfwDZVF+sk8Jy/UDy/NFqqITqPZIYZhiLZTDM9tZVzYYuaucIxuoEJ1yk FDtjq8xafthmTAJL598MwiUch4qPpidB25bX7JkmX1iMxyj06cJtvMKuRPQskhfw 1hb7lJLIbMo8x2FifqyQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v14427gm1-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:29:53 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 28B7A10005F; Thu, 21 Dec 2023 13:29:51 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 1D6A923C699; Thu, 21 Dec 2023 13:29:51 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:29:50 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 4/8] drm/stm: ltdc: implement bus clock Date: Thu, 21 Dec 2023 13:28:39 +0100 Message-ID: <20231221122843.418650-5-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> References: <20231221122843.418650-1-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" From: Yannick Fertre The latest hardware version of the LTDC presents the addition of a bus clock, which contains the global configuration registers and the interrupt register. Signed-off-by: Yannick Fertre --- drivers/gpu/drm/stm/ltdc.c | 8 ++++++++ drivers/gpu/drm/stm/ltdc.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c index 5576fdae4962..67064f47a4cb 100644 --- a/drivers/gpu/drm/stm/ltdc.c +++ b/drivers/gpu/drm/stm/ltdc.c @@ -1896,6 +1896,8 @@ void ltdc_suspend(struct drm_device *ddev) DRM_DEBUG_DRIVER("\n"); clk_disable_unprepare(ldev->pixel_clk); + if (ldev->bus_clk) + clk_disable_unprepare(ldev->bus_clk); } int ltdc_resume(struct drm_device *ddev) @@ -1910,6 +1912,12 @@ int ltdc_resume(struct drm_device *ddev) DRM_ERROR("failed to enable pixel clock (%d)\n", ret); return ret; } + if (ldev->bus_clk) { + if (clk_prepare_enable(ldev->bus_clk)) { + DRM_ERROR("Unable to prepare bus clock\n"); + return -ENODEV; + } + } return 0; } diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h index 9d488043ffdb..155d8e4a7c6b 100644 --- a/drivers/gpu/drm/stm/ltdc.h +++ b/drivers/gpu/drm/stm/ltdc.h @@ -44,6 +44,7 @@ struct ltdc_device { void __iomem *regs; struct regmap *regmap; struct clk *pixel_clk; /* lcd pixel clock */ + struct clk *bus_clk; /* bus clock */ struct mutex err_lock; /* protecting error_status */ struct ltdc_caps caps; u32 irq_status; From patchwork Thu Dec 21 12:30:34 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501781 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D8AB4C35274 for ; Thu, 21 Dec 2023 12:31:39 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 4125710E33E; Thu, 21 Dec 2023 12:31:39 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by gabe.freedesktop.org (Postfix) with ESMTPS id 15F7710E33E for ; Thu, 21 Dec 2023 12:31:37 +0000 (UTC) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL8lG7H012122; Thu, 21 Dec 2023 13:31:20 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding:content-type; s=selector1; bh=taptUeW ufNXHyemueP2x8NUNC0EjLHeC6TmVKFcUkU4=; b=U8VvYhpUpd/NLziemRido/T /XsbHkSOg9M78/aStLHKEMma7XByzjU+7UWKzjsoJQCEzHZPreFfFIsMw5UHrWVt jR2tDkcWshduOq4JcLaTkylMaCLV5s9tT/wO2D2lCVCK9F+kL45ddbz3xQntnxnI ULCVxmaPPFXEYAOypfQpBjetUfFAFoHaymLI8QCT0oHTCqFGpmNeHFYrnErhdAgE aCT+8DYGKcFmb0xEzofXkaPW+gFikrxoWbC9VpM+5IHKqyowigQ5KmWuQfBo7867 +Vt8wG6P1M5LapDDdvwZgfdvam5LvhwSEFLlgm91cMEOYlaBV/iopi+ORuQ/dPQ= = Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v13nhq5cm-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:31:19 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 4F4AC100053; Thu, 21 Dec 2023 13:31:18 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 431962747C2; Thu, 21 Dec 2023 13:31:18 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:31:15 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 5/8] drm/stm: ltdc: add lvds pixel clock Date: Thu, 21 Dec 2023 13:30:34 +0100 Message-ID: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" The STM32MP25x display subsystem presents a mux which feeds the loopback pixel clock of the current bridge in use into the LTDC. This mux is only accessible through sysconfig registers which is not yet available in the STM32MP25x common clock framework. While waiting for a complete update of the clock framework, this would allow to use the LVDS. Signed-off-by: Raphael Gallais-Pou Signed-off-by: Yannick Fertre --- drivers/gpu/drm/stm/ltdc.c | 18 ++++++++++++++++++ drivers/gpu/drm/stm/ltdc.h | 1 + 2 files changed, 19 insertions(+) diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c index 67064f47a4cb..1cf9f16e56cc 100644 --- a/drivers/gpu/drm/stm/ltdc.c +++ b/drivers/gpu/drm/stm/ltdc.c @@ -838,6 +838,12 @@ ltdc_crtc_mode_valid(struct drm_crtc *crtc, int target_max = target + CLK_TOLERANCE_HZ; int result; + if (ldev->lvds_clk) { + result = clk_round_rate(ldev->lvds_clk, target); + DRM_DEBUG_DRIVER("lvds pixclk rate target %d, available %d\n", + target, result); + } + result = clk_round_rate(ldev->pixel_clk, target); DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result); @@ -1898,6 +1904,8 @@ void ltdc_suspend(struct drm_device *ddev) clk_disable_unprepare(ldev->pixel_clk); if (ldev->bus_clk) clk_disable_unprepare(ldev->bus_clk); + if (ldev->lvds_clk) + clk_disable_unprepare(ldev->lvds_clk); } int ltdc_resume(struct drm_device *ddev) @@ -1918,6 +1926,12 @@ int ltdc_resume(struct drm_device *ddev) return -ENODEV; } } + if (ldev->lvds_clk) { + if (clk_prepare_enable(ldev->lvds_clk)) { + DRM_ERROR("Unable to prepare lvds clock\n"); + return -ENODEV; + } + } return 0; } @@ -1989,6 +2003,10 @@ int ltdc_load(struct drm_device *ddev) } } + ldev->lvds_clk = devm_clk_get(dev, "lvds"); + if (IS_ERR(ldev->lvds_clk)) + ldev->lvds_clk = NULL; + rstc = devm_reset_control_get_exclusive(dev, NULL); mutex_init(&ldev->err_lock); diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h index 155d8e4a7c6b..662650a0fae2 100644 --- a/drivers/gpu/drm/stm/ltdc.h +++ b/drivers/gpu/drm/stm/ltdc.h @@ -44,6 +44,7 @@ struct ltdc_device { void __iomem *regs; struct regmap *regmap; struct clk *pixel_clk; /* lcd pixel clock */ + struct clk *lvds_clk; /* lvds pixel clock */ struct clk *bus_clk; /* bus clock */ struct mutex err_lock; /* protecting error_status */ struct ltdc_caps caps; From patchwork Thu Dec 21 12:30:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501782 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BD0B3C35274 for ; Thu, 21 Dec 2023 12:31:45 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 0309110E365; Thu, 21 Dec 2023 12:31:45 +0000 (UTC) Received: from mx08-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by gabe.freedesktop.org (Postfix) with ESMTPS id A9CA710E365 for ; Thu, 21 Dec 2023 12:31:40 +0000 (UTC) Received: from pps.filterd (m0369457.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BLB0O4f023358; Thu, 21 Dec 2023 13:31:24 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=Nsa2H5miBl9akiMiWy7Ow+OggKNKlHu8xqBbyIslAYs=; b=gv gNSaoUjsjiUUId1Vnh9nz3oHoX5hASULFtEeA8AcblY+8aJgUitlTKIQniuawxvu qroWXKs41yxDL9jr41cje2CDJI9tIjPGjO7ltnyp2yGNyd/A956ySbM6KLYBQNzd 508TvQFK2imUqUAm5D2DaSY44UK58lPwiRBT7rF+idDajHCO+0Qa7a31BApEatDQ nzzYKSR1NWgu2zw+WL1gOHEt+acXqt0mIuS53Zb7xX/uD7G/fkHL8zfNXXIAhHoV sssTM0svSxvntlluqS6ZwhQiTMnkjZtcMbwHFaPaPVT3Yizy7TeF7q+/03BhI9Rh NnCyobxcLdMioZ056ttg== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v3q810nns-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:31:24 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6EEA0100053; Thu, 21 Dec 2023 13:31:22 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 63E4F2747C4; Thu, 21 Dec 2023 13:31:22 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:31:19 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 6/8] arm64: dts: st: add ltdc support on stm32mp251 Date: Thu, 21 Dec 2023 13:30:35 +0100 Message-ID: <20231221123037.418851-7-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> References: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" The LCD-TFT Display Controller (LTDC) handles display composition, scaling and rotation. It provides a parallel digital RGB flow to be used by display interfaces. Signed-off-by: Raphael Gallais-Pou --- arch/arm64/boot/dts/st/stm32mp251.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 93bc8a8908ce..064077e98dfd 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -212,6 +212,18 @@ i2c8: i2c@46040000 { status = "disabled"; }; + ltdc: display-controller@48010000 { + compatible = "st,stm32-ltdc"; + reg = <0x48010000 0x400>; + st,syscon = <&syscfg>; + interrupts = , + ; + clocks = <&rcc CK_BUS_LTDC>, <&rcc CK_KER_LTDC>; + clock-names = "bus", "lcd"; + resets = <&rcc LTDC_R>; + status = "disabled"; + }; + sdmmc1: mmc@48220000 { compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00353180>; From patchwork Thu Dec 21 12:30:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501783 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 484FDC46CD3 for ; Thu, 21 Dec 2023 12:31:46 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 7225210E69C; Thu, 21 Dec 2023 12:31:45 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by gabe.freedesktop.org (Postfix) with ESMTPS id 02D7710E365 for ; Thu, 21 Dec 2023 12:31:41 +0000 (UTC) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BL96pjJ012155; Thu, 21 Dec 2023 13:31:26 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=33mIaakNjgGmTpsio7WUgBiZQuAUgZtT5Gp6IIaAPWw=; b=ms AWdJtCB3oyulGMALHC3STcUGYUsJ9F8FdNQAb1lfmpZpqKTWfrLUIUirxnILW/5w nCqFvgYYgaXgEMQ19brrs0AFUmGokPWTp2MR1L1Q8SDsrYh1A8xy1noumUcHOAMF MqIYfAd+oakJIWV8di0hO04m9TA40Z7C4HwDLjh7FYcfkJ9jxZUW4lrLP45bbrfR KvnTJhPBw0cd6SkfEkjPjWxglGICpeZMmrdHTOO04EiZHOpl3lc7Xw5my0dZGFdk 4ICDGVarBGf1g5/YVSbhfDx9G8KpjO6k/Ks8OXjwt3+U+rylQmMqBXHzS5M7Y+Xs 8xTEmV19dwSBKj0HwJQQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v13nhq5d3-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:31:26 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 4EBA0100053; Thu, 21 Dec 2023 13:31:25 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 42D292747C5; Thu, 21 Dec 2023 13:31:25 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:31:24 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 7/8] arm64: dts: st: add lvds support on stm32mp253 Date: Thu, 21 Dec 2023 13:30:36 +0100 Message-ID: <20231221123037.418851-8-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> References: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" This patch adds LVDS support on stm32mp253. The LVDS is used on STM32MP2 as a display interface. LVDS PLL clock is binded to the LTDC input clock. Signed-off-by: Raphael Gallais-Pou --- arch/arm64/boot/dts/st/stm32mp253.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi index af48e82efe8a..bcc605e502de 100644 --- a/arch/arm64/boot/dts/st/stm32mp253.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi @@ -21,3 +21,20 @@ arm-pmu { interrupt-affinity = <&cpu0>, <&cpu1>; }; }; + +<dc { + clocks = <&rcc CK_BUS_LTDC>, <&rcc CK_KER_LTDC>, <&lvds 0>; + clock-names = "bus", "lcd", "lvds"; +}; + +&rifsc { + lvds: lvds@48060000 { + #clock-cells = <0>; + compatible = "st,stm32-lvds"; + reg = <0x48060000 0x2000>; + clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>; + clock-names = "pclk", "ref"; + resets = <&rcc LVDS_R>; + status = "disabled"; + }; +}; From patchwork Thu Dec 21 12:30:37 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13501784 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 55DBCC35274 for ; Thu, 21 Dec 2023 12:31:53 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 6D1AD10E6A9; Thu, 21 Dec 2023 12:31:52 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by gabe.freedesktop.org (Postfix) with ESMTPS id 6DDDC10E365 for ; Thu, 21 Dec 2023 12:31:44 +0000 (UTC) Received: from pps.filterd (m0288072.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 3BLCVIVF026219; Thu, 21 Dec 2023 13:31:31 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= selector1; bh=f+RuX/Eia9uR2MHJdZssTap6bVCpuc5frqUe4l82QhE=; b=2h ahOQz5JifuxVoA0OYdFj/Ue+3k4I8L8jDuYDD+UXKwQJTsNMtjPWKax1HXf1ZQ+c oTPwx6VD22ERWODSXMSNZWFiVKfnSaLuqqaRhS3Bcc5r/3uT/sfMXmmR+mDu29/n DNFBpgjKlW0/oonS5T3tETbFSNVAc1RTE5xz1ee2OAExdrecK/2C/u9e7aktmBIQ M1lbDUSARjCOgKt226SLup3TxD7k+0AZyiH4RNVsLn5l88gsRPehW1RUdhSJzK3J BFZ8LGkFxSjaNK0IqciaIJlIKM73vUxNf8C6Aj/lt8xnvHaEV3esiiGmlNjFRmRo +3TVE5NVp73BXPiGZXWA== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3v126m7ywe-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 21 Dec 2023 13:31:31 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 8C93C10005F; Thu, 21 Dec 2023 13:31:29 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 820AA2747C5; Thu, 21 Dec 2023 13:31:29 +0100 (CET) Received: from localhost (10.252.25.159) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 21 Dec 2023 13:31:27 +0100 From: Raphael Gallais-Pou To: Laurent Pinchart , Neil Armstrong , Jessica Zhang , Sam Ravnborg , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Philipp Zabel , Lad Prabhakar , Thierry Reding Subject: [PATCH v1 8/8] arm64: dts: st: add display support on stm32mp257f-ev Date: Thu, 21 Dec 2023 13:30:37 +0100 Message-ID: <20231221123037.418851-9-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> References: <20231221123037.418851-6-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.25.159] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-21_05,2023-12-20_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" This patch enables the following IPs on stm32mp257f-ev : * LTDC * LVDS * WSVGA LVDS panel (1024x600) * Panel backlight * Ilitek touchescreen Signed-off-by: Raphael Gallais-Pou --- arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 0ea8e69bfb3d..ca2da988d91c 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -29,6 +29,43 @@ memory@80000000 { reg = <0x0 0x80000000 0x1 0x0>; }; + panel_lvds: panel-lvds { + compatible = "edt,etml0700z9ndha", "panel-lvds"; + enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>; + backlight = <&panel_lvds_backlight>; + status = "okay"; + + width-mm = <156>; + height-mm = <92>; + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <54000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <150>; + hback-porch = <150>; + hsync-len = <21>; + vfront-porch = <24>; + vback-porch = <24>; + vsync-len = <21>; + }; + + port { + lvds_panel_in: endpoint { + remote-endpoint = <&lvds_out0>; + }; + }; + }; + + panel_lvds_backlight: panel-lvds-backlight { + compatible = "gpio-backlight"; + gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; + default-on; + default-brightness-level = <0>; + status = "okay"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -63,6 +100,15 @@ &i2c2 { i2c-scl-falling-time-ns = <13>; clock-frequency = <400000>; status = "okay"; + + ili2511: ili2511@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpioi>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>; + status = "okay"; + }; }; &i2c8 { @@ -75,6 +121,39 @@ &i2c8 { status = "disabled"; }; +<dc { + status = "okay"; + + port { + ltdc_ep0_out: endpoint { + remote-endpoint = <&lvds_in>; + }; + }; +}; + +&lvds { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out0: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a>;