From patchwork Fri Feb 23 13:37:28 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Ceclan, Dumitru" X-Patchwork-Id: 13569100 Received: from mail-ej1-f45.google.com (mail-ej1-f45.google.com [209.85.218.45]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 020357AE6E; Fri, 23 Feb 2024 13:38:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.45 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695487; cv=none; b=fLFQWj9y3Je9gx8SysFrsr8BCy9f/1zkJ9JRrbzvt12zcNUqOoYdwA3jXBG51L0k3u9Km0FcyNb4aCRoKluwPEei29biddmLAh652Zfm8CtVho7BcaQR9AqG4ISRZbmtaRTHL+ZpReIb17Xz8jH4OEVXqRgsdrMAVbwoxeqAQ34= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695487; c=relaxed/simple; bh=5ieuGD931HGPK6rLXZGzOee73cDPA9R58arcB59nvCg=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version:Content-Type; b=TbyymG8Wqutwt46jKgO54baUty8iTAVWJSchCXACL55urLggB5b29p3rccN6j6ORh51OaSqteU+Yaz/1DD3+KHyO8TqS5IT1yba+xASL0oNtOGNXzIkL9P2YYzkeUx/rXDMOtUxzMsLRUCkUGcOpLr6wqNGT6j802WJbD7Qc+kU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=QsA924Ru; arc=none smtp.client-ip=209.85.218.45 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="QsA924Ru" Received: by mail-ej1-f45.google.com with SMTP id a640c23a62f3a-a3f48422fb6so123011966b.3; Fri, 23 Feb 2024 05:38:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1708695483; x=1709300283; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=7xWo64HPyceyCrU5fgBBH7VbC2lBdca093uyLG+HM+8=; b=QsA924RuxRvKfoPiNMpSyusFqfnrAUzWlrRRS52ueegWJONGUiMqWgwhEUlEUo9oRa Krn8IMrEaIoi5mWUKehfVMVIf+cdjCs0rOCR1YbhZwoxcnwJE/MxyXWTLZJOWkEjBt4Q LM0hxqmasrIEjOHgLQR1R/eEL6e3EQmuS7jD7wtp/Ust/rgD616fN3va+r0YQaQtIILU 1gUSBaGiFaua90u3Pr38xOABCpzB9Ow0NRcxMSQHcoPEuc1GLvS57clj7+K18iKTz2/6 ygCvnGXWBhnDXXYAvf1UniTz51v22UrFDJIVsArkFBzJOtrc3jYpaxp0BbpXtasIqgrX IV1Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1708695483; x=1709300283; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=7xWo64HPyceyCrU5fgBBH7VbC2lBdca093uyLG+HM+8=; b=eVj7sUfMBI4mfBlr2jqocEPXZitJwcp5O9RUNkdiEeIHUDq8iGXNDdVowOKjGhAPqP 9kew72zLjDhvC6zKtOTuK3acQQPAmH0vheBQB6JuxGqjNrDo48Aj02rGWg9CAXhNaPSJ hhR5k/U+Pa+mlnWI50cq/TehbxUibpYJhdx+FTXkCkkcNzZezgwPRr2YbhY/5ymFto/h iqHbNgGx9nCCWp9yLKF5R+vjy3phK/am1JWbbWZPLSKHKjhm5UltY4Irb9Z1DGqS8VHQ zKxXEYE5s4zSlIjvMPRAt7pLlGNhCyFjqC+dEor4cAYHzcIFOWnHNngvkV1IZhJaODMw wBQg== X-Forwarded-Encrypted: i=1; AJvYcCUHnYFo3ikLl7K0FouLUlzhznV209nV9eP/FiIfKc4eMmqRvMvrCxlL2O6XiqmdbtVoE6vg0XLnT/qTYIpBl1+N4mAbUc2MllpKAxkLBYyrXBRU9moNRWQdg2awIN/O6Wg0bH/oeznkZjbTbJ9dJd21bcv0z0/tOUM9PUFQ1G5tQdPMVepp5HbH71Qj8n6kpSl0foNqxuO6f1rfhOK6FrQ= X-Gm-Message-State: AOJu0YykzVjha6PHgP1t++0qy7zn5ZbhmLKwG0eXJFHCyDH8krDU5UNL ujaJlb+7gcGUCofuLoYk0LW0lU/bt1mX/nk9pA6JPf2VBoEJjqLJ X-Google-Smtp-Source: AGHT+IHSuJ0k6vRbHvVLRXkmiDeKhDXRdviKQl0ehB5fsFZRrRWY4C9VF4pdHPAiWswO8XQvXd7kRg== X-Received: by 2002:a17:906:2608:b0:a3e:c680:ee3a with SMTP id h8-20020a170906260800b00a3ec680ee3amr1365827ejc.30.1708695482674; Fri, 23 Feb 2024 05:38:02 -0800 (PST) Received: from HYB-hhAwRlzzMZb.ad.analog.com ([83.103.132.21]) by smtp.gmail.com with ESMTPSA id h11-20020a17090634cb00b00a3d7bcfb9a1sm6911429ejb.128.2024.02.23.05.38.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 23 Feb 2024 05:38:02 -0800 (PST) From: Dumitru Ceclan To: Cc: linus.walleij@linaro.org, brgl@bgdev.pl, andy@kernel.org, linux-gpio@vger.kernel.org, Lars-Peter Clausen , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Michael Walle , Andy Shevchenko , Arnd Bergmann , ChiaEn Wu , Niklas Schnelle , =?utf-8?q?Leonard_G=C3=B6hrs?= , Mike Looijmans , Haibo Chen , Hugo Villeneuve , David Lechner , Ceclan Dumitru , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dumitru Ceclan , Conor Dooley Subject: [PATCH v15 1/3] dt-bindings: adc: add AD7173 Date: Fri, 23 Feb 2024 15:37:28 +0200 Message-ID: <20240223133758.9787-1-mitrutzceclan@gmail.com> X-Mailer: git-send-email 2.42.0 Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The AD7173 family offer a complete integrated Sigma-Delta ADC solution which can be used in high precision, low noise single channel applications or higher speed multiplexed applications. The Sigma-Delta ADC is intended primarily for measurement of signals close to DC but also delivers outstanding performance with input bandwidths out to ~10kHz. Reviewed-by: Conor Dooley Signed-off-by: Dumitru Ceclan --- V14->V15 V13->V14 - Refer in descriptions of the avdd-supply as AVDD1 in concordance to datasheet - Fix typo - Place interrupts descriptions separately for each item - Restrict max channel reg to 3 for models AD717x-2 V12->V13 - Remove adi,clock-select - Update avdd and avdd2 supply descriptions - Update adi,reference-select description to suggest that it is referenced to avss - Make clocks/clock-names and clock-controller mutually exclusive V11->V12 - Drop "binding", describe hardware in binding description - Rename refin and refin2 to vref and vref2 - Add better description to external references to better show that the voltage value that needs to be specified is the difference between the positive and negative reference pins - Add optional clocks properties - Add optional adi,clock-select property - Add option for second interrupt, error - Add description to interrupts V10->V11 - Fix example warning: '#gpio-cells' is a dependency of 'gpio-controller' - Add description to #gpio-cells property V9->V10 - Fix dt_binding_check type warning from adi,reference-select V8->v9 - Add gpio-controller and "#gpio-cells" properties - Add missing avdd2 and iovdd supplies - Add string type to reference-select V7->V8 - include missing fix from V6 V6->V7 V5->V6 - Moved global required property to proper placement V4 -> V5 - Use string enum instead of integers for "adi,reference-select" - Fix conditional checking in regards to compatible V3 -> V4 - include supply attributes - add channel attribute for selecting conversion reference V2 -> V3 - remove redundant descriptions - use referenced 'bipolar' property - remove newlines from example V1 -> V2 .../bindings/iio/adc/adi,ad7173.yaml | 246 ++++++++++++++++++ 1 file changed, 246 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml new file mode 100644 index 000000000000..36f16a325bc5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7173 ADC + +maintainers: + - Ceclan Dumitru + +description: | + Analog Devices AD717x ADC's: + The AD717x family offer a complete integrated Sigma-Delta ADC solution which + can be used in high precision, low noise single channel applications + (Life Science measurements) or higher speed multiplexed applications + (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended + primarily for measurement of signals close to DC but also delivers + outstanding performance with input bandwidths out to ~10kHz. + + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf + +properties: + compatible: + enum: + - adi,ad7172-2 + - adi,ad7173-8 + - adi,ad7175-2 + - adi,ad7176-2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: | + Ready: multiplexed with SPI data out. While SPI CS is low, + can be used to indicate the completion of a conversion. + + - description: | + Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR, + and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. + Therefore, the ERROR pin indicates that an error has occurred. + + interrupt-names: + minItems: 1 + items: + - const: rdy + - const: err + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 20000000 + + gpio-controller: + description: Marks the device node as a GPIO controller. + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies + GPIO flags, as defined in . + + vref-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref) specified here must be the voltage difference between the + REF+ and REF- pins: Vref = (REF+) - (REF-). + + vref2-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref2) specified here must be the voltage difference between the + REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-). + + avdd-supply: + description: Avdd supply, can be used as reference for conversion. + This supply is referenced to AVSS, voltage specified here + represents (AVDD1 - AVSS). + + avdd2-supply: + description: Avdd2 supply, used as the input to the internal voltage regulator. + This supply is referenced to AVSS, voltage specified here + represents (AVDD2 - AVSS). + + iovdd-supply: + description: iovdd supply, used for the chip digital interface. + + clocks: + maxItems: 1 + description: | + Optional external clock source. Can include one clock source: external + clock or external crystal. + + clock-names: + enum: + - ext-clk + - xtal + + '#clock-cells': + const: 0 + +patternProperties: + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + diff-channels: + items: + minimum: 0 + maximum: 31 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + vref : REF+ /REF− + vref2 : REF2+ /REF2− + refout-avss: REFOUT/AVSS (Internal reference) + avdd : AVDD /AVSS + + External reference ref2 only available on ad7173-8. + If not specified, internal reference used. + $ref: /schemas/types.yaml#/definitions/string + enum: + - vref + - vref2 + - refout-avss + - avdd + default: refout-avss + + required: + - reg + - diff-channels + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + not: + contains: + const: adi,ad7173-8 + then: + properties: + vref2-supply: false + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,reference-select: + enum: + - vref + - refout-avss + - avdd + reg: + maximum: 3 + + - if: + anyOf: + - required: [clock-names] + - required: [clocks] + then: + properties: + '#clock-cells': false + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7173-8"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + vref-supply = <&dummy_regulator>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = "vref"; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + }; + + channel@2 { + reg = <2>; + bipolar; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + bipolar; + diff-channels = <6 7>; + }; + + channel@4 { + reg = <4>; + diff-channels = <8 9>; + adi,reference-select = "avdd"; + }; + }; + }; From patchwork Fri Feb 23 13:37:29 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ceclan, Dumitru" X-Patchwork-Id: 13569101 Received: from mail-ed1-f50.google.com (mail-ed1-f50.google.com [209.85.208.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C433C7EF04; Fri, 23 Feb 2024 13:38:06 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.50 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695488; cv=none; b=OaiBUMtIvdrCoge4NOWHkHLAKn1d20+HIO3IOz++NFRQRo4OXYqVRZmaeHkQUaSdTTwT6JlR8E3/odv6nDW1Q21B8XIspY7yMHJWie0Uu74Hte7R2epnvS8nVTOG0IkwpPJvzpy3837lVkWtzpx6I9u9vT+lo3aIglcaepOq6YQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695488; c=relaxed/simple; bh=rwgTv0+tt8DmkwbCCq7IVVH09nh6DvQW2NolmCLxYCI=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=fjqpiflG/B0ARHHrlEIFntdZaEmHstWXw8aSrRk8SBBFRlsFLQIUi88pokOZ0x2ymY3n+fe/sbGBIL3FTIEAfm1IaDXEs/OZsubMD/6Q4SWkHFammV1A3gT2sD4EMGG/tVZDtYwuJBTVcYB7pzhqfh0kCGQrFMDcSwW/z7RSpyo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=OywzuOoN; arc=none smtp.client-ip=209.85.208.50 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="OywzuOoN" Received: by mail-ed1-f50.google.com with SMTP id 4fb4d7f45d1cf-563fe793e1cso1060128a12.3; Fri, 23 Feb 2024 05:38:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1708695485; x=1709300285; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=FVYh8Pt1sI9DwV8YnQvT559pSivGGSaGIJgfdzNNlQA=; b=OywzuOoN48Ndobq7Pk6FbHRhsU89Ks6iCKfBkw44mc/qaX9HN+DWTWar+XqMlVQOaf QnWLID/XkCgxXxM8k9g/Gvvx4GDG1vIsRKYiXhtnDgEpvOCichDvL8Pc7Q8AcontlOkj nMcrhhVJ6rvv2qnR1DSl7uIC4ef3Xr8vglw40HcAHV5W5vJGyrc+qVcydxvV6r8nZi92 zo70e6qmcxJf/D8ZsmE7qY+ZmTxnK637kGy2iDKG4E6hkjyPDpK9aDkLAzznwjebcVH4 qkd0w/lGyyUJRrTYYcFemn4qoUpm9B3p6Nqpra8M2rDpUWa+InLEtcixHcGqBd7XLYCK M1QQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1708695485; x=1709300285; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=FVYh8Pt1sI9DwV8YnQvT559pSivGGSaGIJgfdzNNlQA=; b=iu6nLoiD6WvYy/j97uUyb48DvI3NH9P+91qtxNNanFDlqBtv1nDxdX+kYo/HtRAgrV /2L63jdk9/tbAP6/Fm/oZ24heqUCqwob6hfROMVAC3piN0c76PnRJS316Ln/A4gttbEF 4tkBKbDo4UrXhsIVCSR3nccmIFUIXj+hSULnMZkC6NDq7km9yrG3OVnqh0amWJnSndox /Co9R8BlUUmJ6eIr9DyqB8HcberIRB7l1PoyPUCijK3quqcxNutG7Y6sN2CvncDRCmaH 0JPMET3lSXEaLyn3w39IJKoM6MtMpEEMGgaqCoXT0lob0vdDMJyYos/+0DFDCRvRUpHS TkkQ== X-Forwarded-Encrypted: i=1; AJvYcCWnGfFgJPOq1CVZWVNptgKmeU0rMDKFpND9Hn/FRnhVBeXCwQSTwqv/iuf2uSmvqSLWvdSMsCR5sl7bGbG2dU8NWPa2k5RLrmSRVAP+gN2NWekvt1um90HucoxGob2t6V4OzQsPz3bB3ekxeRtkKPOEhU6g600zVo4oeRDN6x1M3EN0BkVTgV0/bXXeczYuZX8FKsaXs4dIWmQdFwZQeN0= X-Gm-Message-State: AOJu0YyxUBhbTFwIZJQV0IcjzTk8RWDqEWnmrlf0EHnkfxKxZiYZ8uZK RA5RKA1ExoKxDYxkmyWHOtj4ammXw9t+dGt4+biIAjN1OboVIXL9LwENKqxlB54Llw== X-Google-Smtp-Source: AGHT+IGN80GLzTdjf2dyxzlonrvB6WR0vGG7AF0Ag8OpGawTvTcRyjKhjMpjJiWHmavw7bfrdOtG9g== X-Received: by 2002:a17:906:802:b0:a3d:a63f:2db0 with SMTP id e2-20020a170906080200b00a3da63f2db0mr1302630ejd.28.1708695484688; Fri, 23 Feb 2024 05:38:04 -0800 (PST) Received: from HYB-hhAwRlzzMZb.ad.analog.com ([83.103.132.21]) by smtp.gmail.com with ESMTPSA id h11-20020a17090634cb00b00a3d7bcfb9a1sm6911429ejb.128.2024.02.23.05.38.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 23 Feb 2024 05:38:04 -0800 (PST) From: Dumitru Ceclan To: Cc: linus.walleij@linaro.org, brgl@bgdev.pl, andy@kernel.org, linux-gpio@vger.kernel.org, Lars-Peter Clausen , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Michael Walle , Andy Shevchenko , Arnd Bergmann , ChiaEn Wu , Niklas Schnelle , =?utf-8?q?Leonard_G=C3=B6hrs?= , Mike Looijmans , Haibo Chen , Hugo Villeneuve , David Lechner , Ceclan Dumitru , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dumitru Ceclan Subject: [PATCH v15 2/3] iio: adc: ad_sigma_delta: Add optional irq selection Date: Fri, 23 Feb 2024 15:37:29 +0200 Message-ID: <20240223133758.9787-2-mitrutzceclan@gmail.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20240223133758.9787-1-mitrutzceclan@gmail.com> References: <20240223133758.9787-1-mitrutzceclan@gmail.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add optional irq_num attribute to ad_sigma_delta_info structure for selecting the used interrupt line for ADC's conversion completion. Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko --- V15->V14 - Uppercase ADC acronym in commit message - Rename irq_num to irq_line, change type to int V13->V14 - Invert logic checking the presence of the optional irq_num attribute V1->V12 drivers/iio/adc/ad_sigma_delta.c | 23 ++++++++++++++--------- include/linux/iio/adc/ad_sigma_delta.h | 3 +++ 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index 7e2192870743..03c170b638a8 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -222,11 +222,11 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta, goto out; sigma_delta->irq_dis = false; - enable_irq(sigma_delta->spi->irq); + enable_irq(sigma_delta->irq_line); timeout = wait_for_completion_timeout(&sigma_delta->completion, 2 * HZ); if (timeout == 0) { sigma_delta->irq_dis = true; - disable_irq_nosync(sigma_delta->spi->irq); + disable_irq_nosync(sigma_delta->irq_line); ret = -EIO; } else { ret = 0; @@ -295,7 +295,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev, ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE); sigma_delta->irq_dis = false; - enable_irq(sigma_delta->spi->irq); + enable_irq(sigma_delta->irq_line); ret = wait_for_completion_interruptible_timeout( &sigma_delta->completion, HZ); @@ -315,7 +315,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev, out: if (!sigma_delta->irq_dis) { - disable_irq_nosync(sigma_delta->spi->irq); + disable_irq_nosync(sigma_delta->irq_line); sigma_delta->irq_dis = true; } @@ -396,7 +396,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev) goto err_unlock; sigma_delta->irq_dis = false; - enable_irq(sigma_delta->spi->irq); + enable_irq(sigma_delta->irq_line); return 0; @@ -414,7 +414,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev) wait_for_completion_timeout(&sigma_delta->completion, HZ); if (!sigma_delta->irq_dis) { - disable_irq_nosync(sigma_delta->spi->irq); + disable_irq_nosync(sigma_delta->irq_line); sigma_delta->irq_dis = true; } @@ -516,7 +516,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p) irq_handled: iio_trigger_notify_done(indio_dev->trig); sigma_delta->irq_dis = false; - enable_irq(sigma_delta->spi->irq); + enable_irq(sigma_delta->irq_line); return IRQ_HANDLED; } @@ -586,9 +586,9 @@ static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_de sigma_delta->irq_dis = true; /* the IRQ core clears IRQ_DISABLE_UNLAZY flag when freeing an IRQ */ - irq_set_status_flags(sigma_delta->spi->irq, IRQ_DISABLE_UNLAZY); + irq_set_status_flags(sigma_delta->irq_line, IRQ_DISABLE_UNLAZY); - ret = devm_request_irq(dev, sigma_delta->spi->irq, + ret = devm_request_irq(dev, sigma_delta->irq_line, ad_sd_data_rdy_trig_poll, sigma_delta->info->irq_flags | IRQF_NO_AUTOEN, indio_dev->name, @@ -668,6 +668,11 @@ int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev, } } + if (info->irq_line) + sigma_delta->irq_line = info->irq_line; + else + sigma_delta->irq_line = spi->irq; + iio_device_set_drvdata(indio_dev, sigma_delta); return 0; diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h index 7852f6c9a714..576eb617939d 100644 --- a/include/linux/iio/adc/ad_sigma_delta.h +++ b/include/linux/iio/adc/ad_sigma_delta.h @@ -45,6 +45,7 @@ struct iio_dev; * @data_reg: Address of the data register, if 0 the default address of 0x3 will * be used. * @irq_flags: flags for the interrupt used by the triggered buffer + * @irq_line: IRQ for reading conversions. If 0, spi->irq will be used * @num_slots: Number of sequencer slots */ struct ad_sigma_delta_info { @@ -60,6 +61,7 @@ struct ad_sigma_delta_info { unsigned int data_reg; unsigned long irq_flags; unsigned int num_slots; + int irq_line; }; /** @@ -87,6 +89,7 @@ struct ad_sigma_delta { unsigned int active_slots; unsigned int current_slot; unsigned int num_slots; + int irq_line; bool status_appended; /* map slots to channels in order to know what to expect from devices */ unsigned int *slots; From patchwork Fri Feb 23 13:37:30 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ceclan, Dumitru" X-Patchwork-Id: 13569102 Received: from mail-ed1-f47.google.com (mail-ed1-f47.google.com [209.85.208.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 398D47F7E0; Fri, 23 Feb 2024 13:38:08 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.47 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695493; cv=none; b=Ld0xpLJStHN/wpggEa5krxCmp42uGvgNHh1INA8b6fiVOe01281nCw0a94j3jZZqQL6wRdXZdg5iBspIrpmpT9edMTL/yspK6VZXls9/lhdngdlGj8nN9E/tuZ/rxLepYcyPEC8uQa3tD8y6zObfWYuh82wG8geFcOs7mrrH09o= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708695493; c=relaxed/simple; bh=ssPm+xw7Qddn2ApTRVMqS/AOF1bv+SwG2togBb1AEm4=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=hdNMBM/0EcaZLsIl3RmNyuyQ5gGPNnrLQIEDLT/VAmmMOoBjMXnqx2vDg3pxn0tJ/ct1gAOOMatArpWlya3n4xcT9ckuKpfBC/i7kezCuOMOs1MveUsNnHxDgPsehXVACXdGZfyvx/JmWs3GwY2PiBP/BHHKoWZoy9S/PfYHxxU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=m0pAtIEu; arc=none smtp.client-ip=209.85.208.47 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="m0pAtIEu" Received: by mail-ed1-f47.google.com with SMTP id 4fb4d7f45d1cf-55f50cf2021so1173229a12.1; Fri, 23 Feb 2024 05:38:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1708695487; x=1709300287; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=7+av0nOtwR1wh948lh2kvl3A2jFTBhLL5tgPsxCdZGU=; b=m0pAtIEupPML2K8uS7Vqf+XN3gbZh/AjDlbeTBeHRFkcfe8wd2TZALUGZZDQIQDyWf L+/ix1tqQ7nIlgZVln3aVD6HRQi1drMQcr6fuGSij4xohGP5xlY6J834rXrkEQFWoe2r s8pxEuPecNUWFYaimTP7wwDLcRpCcCovKOZlEvDz/WnfgSjafRcSLDjbj49rzKW7a/l+ xte49jEgvyr61yjlPULgdU1aEGi7PrtMzH62TxthRQPt2l/yAh3OBghe5uBmJPBgGCbC h4+NGm7pV0BVynQ0yGJFz6Gtau0LAo7PtUtp+DCr1FWoV4rPHutP+WM7Z/4BDuTHOrN9 ivRg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1708695487; x=1709300287; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=7+av0nOtwR1wh948lh2kvl3A2jFTBhLL5tgPsxCdZGU=; b=mrwMY2xYG0//6XuN0Qijba8sQVgwK1mLBI0ErWlz9rlf53p4da1o4Kip9WxiQGKzx5 SZEQ7StXimNPnCXbNjKyyUUE/wg0o79wffmZhKANr9mquYh72dbT4UK4GVTs7KtCo3RX WsYGZ2sokTbbXqw+cNe3SoBzD+P6sdITjYzh8Tl67F4Z6tRczbG6ZR3BbJtLcs3psXDH yhP5KEviK8gQAV63l2KELF8Jgz7hRYBuXhehfXol5YELRDroeSfQctkiqLTyQPqS5BoM /tpnKHtUq7gUEqX9TCyBhmCVTEynDLeN3Yy0WT8IeZVW7kH8CwrT/N4xHzuS5F5JW7ru GUCw== X-Forwarded-Encrypted: i=1; AJvYcCVG41IACdeJ+iHHx6K52qpaRamLvKDbh/EgkmYrTHuZeirAWdA3pu+hSkaV/6h/xm3Z0hClEAFukpS0O/6tJu2E7oxa2IrqyjB2cQjMFxss2mfnO6rNBovYMwTKADoKXrfyZ+ZUz3aKKkkq8iruPC/zdtuM0CTWZvDhn46j6nztEhuN9kwnLc/F+Efinog4yrjEtFrEOPfdOjMZW234e04= X-Gm-Message-State: AOJu0YyxeCMF/IY414Am7WiRMh/PST8JC2IbOJWQsuaW/B16SdfIeyy+ XGlH0/UPqAA4a6WFIgCOoigJbzk8OfN1ad5T5/dISU36LD/FfXmX X-Google-Smtp-Source: AGHT+IEiI9PQdy7wIp+26lDQk7cV8oY9T4J8Ljf8JqCQYivP273h0FUho9p6oT3B7HIQgh27x70U6A== X-Received: by 2002:a17:906:693:b0:a3f:6466:bbcd with SMTP id u19-20020a170906069300b00a3f6466bbcdmr1260799ejb.69.1708695486932; Fri, 23 Feb 2024 05:38:06 -0800 (PST) Received: from HYB-hhAwRlzzMZb.ad.analog.com ([83.103.132.21]) by smtp.gmail.com with ESMTPSA id h11-20020a17090634cb00b00a3d7bcfb9a1sm6911429ejb.128.2024.02.23.05.38.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 23 Feb 2024 05:38:06 -0800 (PST) From: Dumitru Ceclan To: Cc: linus.walleij@linaro.org, brgl@bgdev.pl, andy@kernel.org, linux-gpio@vger.kernel.org, Lars-Peter Clausen , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Michael Walle , Andy Shevchenko , Arnd Bergmann , ChiaEn Wu , Niklas Schnelle , =?utf-8?q?Leonard_G=C3=B6hrs?= , Mike Looijmans , Haibo Chen , Hugo Villeneuve , David Lechner , Ceclan Dumitru , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dumitru Ceclan Subject: [PATCH v15 3/3] iio: adc: ad7173: add AD7173 driver Date: Fri, 23 Feb 2024 15:37:30 +0200 Message-ID: <20240223133758.9787-3-mitrutzceclan@gmail.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20240223133758.9787-1-mitrutzceclan@gmail.com> References: <20240223133758.9787-1-mitrutzceclan@gmail.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The AD7173 family offer a complete integrated Sigma-Delta ADC solution which can be used in high precision, low noise single channel applications or higher speed multiplexed applications. The Sigma-Delta ADC is intended primarily for measurement of signals close to DC but also delivers outstanding performance with input bandwidths out to ~10kHz. Reviewed-by: Andy Shevchenko Reviewed-by: Michael Walle # for gpio-regmap Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa --- V14-> V15 - Use local var for dev instead of &st->sd.spi->dev - Use sizeof(*st->config_cnts) - Use device_property_match_property_string() - ENODATA error when no channels are specified V13-> V14 - Update year copyright range - Drop the ad_sigma_delta_info.irq_flags assigment - Use spi_setup() after spi mode assigment - Check IS_ENABLED(CONFIG_COMMON_CLK) for clk registering, drop fwnode NULL check - Rename variable fwnode V12-> V13 - Add precursor patch for new irq_num attribute in ad_sigma_delta_info and ad_sigma_delta structs - Split *_fw_parse_channel_config() into *_channel_config and *_device_config - Reorder probe calls to ad_sd_init to use correctly the optional irq_num attribute - Require in probe interrupt named "rdy" to be present - If external clock not present, register clk provider - If external clock present, get clock and enable - Add constants, strings for clock selections V11-> V12 - rename refin, refin2 to vref, vref2 V10-> V11 V9 -> V10 V8 -> V9 - Add '(x)' to some macro's definition to reduce NO of checks - Use reg 0 constant definition in debug_reg_access() - Rename channels_st_priv_arr to chans_st_arr - Remove unnecessary u32 cast from read_raw() - Compute read_raw() offset instead of constant - Add offset comments to data rate arrays - Removed redundant newline in _parse_channel_config() V7 -> V8 - remove Kconfig commas - reorder include <...gpio/regmap.h> - GPO12_DATA(x) from BIT(x) -> BIT(x+0) - use the same pointer to dev in ad7173_setup() - rewrite temp channel read_raw scale for better readability - add comment to explain temp channel offset - follow multi-line comment style - change ref_sel type to signed int - use fwnode_property_match_property_string() V6 -> V7 - format Kconfig supported models using '-' - include types.h instead of stddef.h - change device_info->num_gpios type to u8 - reorder fields in ad7173_state, place ad_sigma_delta - reorder fields in ad7173_device_info, group by type - add default case in read_raw() - rename ad7173_debug() to ad7173_debug_reg_access() - remove explicit u8 cast - remove return 0; for offset in read_raw() - add '\n' to error messages - reorder probe variables -> reversed xmas tree - remove redundant inner commas in of_match and id_table - simplify selected reference code by setting default value and ignoring fwnode_property_read_string() error - use match_string() for finding selected reference - err on no channels specified - add missing fwnode_handle_put(child) on err return branches - remove spi_set_drvdata() from probe - remove offset variable from find_live_config(), not used - add comment showing a generic LRU implementation might be used if one will exist - MISC: add blank line to chanel_config struct, trailing comma ref_sel_str[], remove blank line in update_scan_mode(), add spaces around '/' V5->V6 V4 -> V5 - List Kconfig supported models one per line - Include and - Remove bits.h and kernel.h include - Add spaces before '\' on multi-line definitions - Change constant definition name from "..._MICROV" to "..._uV" - Change ad7173_channel_config attributes order for grouping by type - Remove redundant {} in ad7173_gpio_init() - Add array with reference select strings - Change parsing of device tree adi,reference-select from integer to string - Change indentation for ad7173_find_live_config() header - Use struct_group() in config struct - Use offsetofend() and sizeof_field() in ad7173_find_live_config() - Split line on logic operator in ad7173_find_live_config() at configs comparison - Use IDA for config slots allocation - Reverse xmas tree order for probe local variables - Use BIT() for computing bipolar channels offset - Change (MICRO/MILLI) to MILLI in read_raw for integer part of sampling frequency - MISC: remove blank line, use 0 value dirrectly, one line statement devm_kcalloc() V3 -> V4 - cleaned up includes - add ad7173_gpio_disable(), include to devm actions - remove iio_device_claim_direct_mode() from update_scan_mode() - always set differential iio_chan attribute to true, retain bipolar info only in private struct - store multiple regulators in state for voltage references - compute read_raw offset depending on channel used reference - configure channel setup using selected reference - add ad7173_get_ref_voltage_milli() - clean up ad7173_fw_sparse_channel_config() changing array access of channel structs to pointers - retain chip name in st->info structure - use spi_device_get_match_data() in probe V2 -> V3 - change Kconfig GPIO_REGMAP and REGMAP_SPI to be conditioned by GPIOLIB - cast chip info to (kernel_ulong_t) to suppress warnings - adjust copyright year to reflect the out-of-tree history - remove unused sysfs and trigger header files - clean up defined macros by using FIELD_PREP( ) inline - use DECLARE_BITMAP( ) for defiining cfg_slots_status - use clear/set _bit instead of assign_bit - rename state field regmap to reg_gpiocon_regmap to better represent usage - replace container_of( ) usages to ad_sigma_delta_to_ad7173( ) - improve readability of sampling frequency conversion in write_raw( ) specifying conversion from Micro to Milli - use iio_device_claim_direct_mode( ) correctly in write_raw( ) - flip logic in write_raw( ) to reduce line length - pass only state struct to gpio_init function - remove else branch at end of probe - remove comma after list terminator for of_match and id_table arrays - clarify write_raw( ) realbits 32 bit size check in a comment - change parsed fw property 'adi,bipolar' to 'bipolar' to matched referenced adc.yaml - use reg_set_base for gpio regmap xlate V1 -> V2 - keep original out-of-tree AD7173 naming - remove gpio_cleanup - handle 32bit realbits offset case - use iio_device_claim_direct_mode, drop own mutex - use dev_err_probe - cleanup headers include - use GENMASK() and FIELD_PREP() - use HZ_PER_MHZ - change #ifdef GPIOLIB to if( IS_ENABLED(CONFIG_GPIOLIB)) - use gpio-regmap - change boolean flag in info struct to number of gpios - NIH memset64 - use struct pointers for config comparison - use spi_write_then_read for ADC reset - use stack allocated buffer for reset - define constant for reset sequence size - use kcalloc instead of kzalloc - change of naming to fw of dt parse function - change de-referencing chain to local variable dev in multiple locations - drop write_raw_get_fmt - add driver private data to spi_device_id table - use fsleep() instead of usleep_range() - put config value inline - align read/write raw arguments - remove zeroed values from channel templates structure - define constants for temperature sensor positive and negative inputs - always enable temperature channel - configure spi clock phase and polarity from driver misc changes (test bit, return disable all, indentation fix, change statements to single line) drivers/iio/adc/Kconfig | 17 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7173.c | 1104 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 1122 insertions(+) create mode 100644 drivers/iio/adc/ad7173.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 3b73c509bd68..c32054afdfc4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -70,6 +70,23 @@ config AD7124 To compile this driver as a module, choose M here: the module will be called ad7124. +config AD7173 + tristate "Analog Devices AD7173 driver" + depends on SPI_MASTER + select AD_SIGMA_DELTA + select GPIO_REGMAP if GPIOLIB + select REGMAP_SPI if GPIOLIB + help + Say yes here to build support for Analog Devices AD7173 and similar ADC + Currently supported models: + - AD7172-2 + - AD7173-8 + - AD7175-2 + - AD7176-2 + + To compile this driver as a module, choose M here: the module will be + called ad7173. + config AD7192 tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" depends on SPI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d2fda54a3259..dd4210a3634f 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_AD7091R) += ad7091r-base.o obj-$(CONFIG_AD7091R5) += ad7091r5.o obj-$(CONFIG_AD7091R8) += ad7091r8.o obj-$(CONFIG_AD7124) += ad7124.o +obj-$(CONFIG_AD7173) += ad7173.o obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7280) += ad7280a.o diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c new file mode 100644 index 000000000000..3dde473cf859 --- /dev/null +++ b/drivers/iio/adc/ad7173.c @@ -0,0 +1,1104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD7172-2/AD7173-8/AD7175-2/AD7176-2 SPI ADC driver + * Copyright (C) 2015, 2024 Analog Devices, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#define AD7173_REG_COMMS 0x00 +#define AD7173_REG_ADC_MODE 0x01 +#define AD7173_REG_INTERFACE_MODE 0x02 +#define AD7173_REG_CRC 0x03 +#define AD7173_REG_DATA 0x04 +#define AD7173_REG_GPIO 0x06 +#define AD7173_REG_ID 0x07 +#define AD7173_REG_CH(x) (0x10 + (x)) +#define AD7173_REG_SETUP(x) (0x20 + (x)) +#define AD7173_REG_FILTER(x) (0x28 + (x)) +#define AD7173_REG_OFFSET(x) (0x30 + (x)) +#define AD7173_REG_GAIN(x) (0x38 + (x)) + +#define AD7173_RESET_LENGTH BITS_TO_BYTES(64) + +#define AD7173_CH_ENABLE BIT(15) +#define AD7173_CH_SETUP_SEL_MASK GENMASK(14, 12) +#define AD7173_CH_SETUP_AINPOS_MASK GENMASK(9, 5) +#define AD7173_CH_SETUP_AINNEG_MASK GENMASK(4, 0) + +#define AD7173_CH_ADDRESS(pos, neg) \ + (FIELD_PREP(AD7173_CH_SETUP_AINPOS_MASK, pos) | \ + FIELD_PREP(AD7173_CH_SETUP_AINNEG_MASK, neg)) +#define AD7173_AIN_TEMP_POS 17 +#define AD7173_AIN_TEMP_NEG 18 + +#define AD7172_ID 0x00d0 +#define AD7173_ID 0x30d0 +#define AD7175_ID 0x0cd0 +#define AD7176_ID 0x0c90 +#define AD7173_ID_MASK GENMASK(15, 4) + +#define AD7173_ADC_MODE_REF_EN BIT(15) +#define AD7173_ADC_MODE_SING_CYC BIT(13) +#define AD7173_ADC_MODE_MODE_MASK GENMASK(6, 4) +#define AD7173_ADC_MODE_CLOCKSEL_MASK GENMASK(3, 2) +#define AD7173_ADC_MODE_CLOCKSEL_INT 0x0 +#define AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT 0x1 +#define AD7173_ADC_MODE_CLOCKSEL_EXT 0x2 +#define AD7173_ADC_MODE_CLOCKSEL_XTAL 0x3 + +#define AD7173_GPIO_PDSW BIT(14) +#define AD7173_GPIO_OP_EN2_3 BIT(13) +#define AD7173_GPIO_MUX_IO BIT(12) +#define AD7173_GPIO_SYNC_EN BIT(11) +#define AD7173_GPIO_ERR_EN BIT(10) +#define AD7173_GPIO_ERR_DAT BIT(9) +#define AD7173_GPIO_GP_DATA3 BIT(7) +#define AD7173_GPIO_GP_DATA2 BIT(6) +#define AD7173_GPIO_IP_EN1 BIT(5) +#define AD7173_GPIO_IP_EN0 BIT(4) +#define AD7173_GPIO_OP_EN1 BIT(3) +#define AD7173_GPIO_OP_EN0 BIT(2) +#define AD7173_GPIO_GP_DATA1 BIT(1) +#define AD7173_GPIO_GP_DATA0 BIT(0) + +#define AD7173_GPO12_DATA(x) BIT((x) + 0) +#define AD7173_GPO23_DATA(x) BIT((x) + 4) +#define AD7173_GPO_DATA(x) ((x) < 2 ? AD7173_GPO12_DATA(x) : AD7173_GPO23_DATA(x)) + +#define AD7173_INTERFACE_DATA_STAT BIT(6) +#define AD7173_INTERFACE_DATA_STAT_EN(x) \ + FIELD_PREP(AD7173_INTERFACE_DATA_STAT, x) + +#define AD7173_SETUP_BIPOLAR BIT(12) +#define AD7173_SETUP_AREF_BUF_MASK GENMASK(11, 10) +#define AD7173_SETUP_AIN_BUF_MASK GENMASK(9, 8) + +#define AD7173_SETUP_REF_SEL_MASK GENMASK(5, 4) +#define AD7173_SETUP_REF_SEL_AVDD1_AVSS 0x3 +#define AD7173_SETUP_REF_SEL_INT_REF 0x2 +#define AD7173_SETUP_REF_SEL_EXT_REF2 0x1 +#define AD7173_SETUP_REF_SEL_EXT_REF 0x0 +#define AD7173_VOLTAGE_INT_REF_uV 2500000 +#define AD7173_TEMP_SENSIIVITY_uV_per_C 477 + +#define AD7173_FILTER_ODR0_MASK GENMASK(5, 0) +#define AD7173_MAX_CONFIGS 8 + +enum ad7173_ids { + ID_AD7172_2, + ID_AD7173_8, + ID_AD7175_2, + ID_AD7176_2, +}; + +struct ad7173_device_info { + const unsigned int *sinc5_data_rates; + unsigned int num_sinc5_data_rates; + unsigned int num_channels; + unsigned int num_configs; + unsigned int num_inputs; + unsigned int clock; + unsigned int id; + char *name; + bool has_temp; + u8 num_gpios; +}; + +struct ad7173_channel_config { + u8 cfg_slot; + bool live; + + /* Following fields are used to compare equality. */ + struct_group(config_props, + bool bipolar; + bool input_buf; + u8 odr; + u8 ref_sel; + ); +}; + +struct ad7173_channel { + unsigned int chan_reg; + unsigned int ain; + struct ad7173_channel_config cfg; +}; + +struct ad7173_state { + struct ad_sigma_delta sd; + const struct ad7173_device_info *info; + struct ad7173_channel *channels; + struct regulator_bulk_data regulators[3]; + unsigned int adc_mode; + unsigned int interface_mode; + unsigned int num_channels; + struct ida cfg_slots_status; + unsigned long long config_usage_counter; + unsigned long long *config_cnts; + struct clk *ext_clk; + struct clk_hw int_clk_hw; +#if IS_ENABLED(CONFIG_GPIOLIB) + struct regmap *reg_gpiocon_regmap; + struct gpio_regmap *gpio_regmap; +#endif +}; + +static const unsigned int ad7173_sinc5_data_rates[] = { + 6211000, 6211000, 6211000, 6211000, 6211000, 6211000, 5181000, 4444000, /* 0-7 */ + 3115000, 2597000, 1007000, 503800, 381000, 200300, 100500, 59520, /* 8-15 */ + 49680, 20010, 16333, 10000, 5000, 2500, 1250, /* 16-22 */ +}; + +static const unsigned int ad7175_sinc5_data_rates[] = { + 50000000, 41667000, 31250000, 27778000, /* 0-3 */ + 20833000, 17857000, 12500000, 10000000, /* 4-7 */ + 5000000, 2500000, 1000000, 500000, /* 8-11 */ + 397500, 200000, 100000, 59920, /* 12-15 */ + 49960, 20000, 16666, 10000, /* 16-19 */ + 5000, /* 20 */ +}; + +static const struct ad7173_device_info ad7173_device_info[] = { + [ID_AD7172_2] = { + .name = "ad7172-2", + .id = AD7172_ID, + .num_inputs = 5, + .num_channels = 4, + .num_configs = 4, + .num_gpios = 2, + .has_temp = true, + .clock = 2 * HZ_PER_MHZ, + .sinc5_data_rates = ad7173_sinc5_data_rates, + .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates), + }, + [ID_AD7173_8] = { + .name = "ad7173-8", + .id = AD7173_ID, + .num_inputs = 17, + .num_channels = 16, + .num_configs = 8, + .num_gpios = 4, + .has_temp = true, + .clock = 2 * HZ_PER_MHZ, + .sinc5_data_rates = ad7173_sinc5_data_rates, + .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates), + }, + [ID_AD7175_2] = { + .name = "ad7175-2", + .id = AD7175_ID, + .num_inputs = 5, + .num_channels = 4, + .num_configs = 4, + .num_gpios = 2, + .has_temp = true, + .clock = 16 * HZ_PER_MHZ, + .sinc5_data_rates = ad7175_sinc5_data_rates, + .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), + }, + [ID_AD7176_2] = { + .name = "ad7176-2", + .id = AD7176_ID, + .num_inputs = 5, + .num_channels = 4, + .num_configs = 4, + .num_gpios = 2, + .has_temp = false, + .clock = 16 * HZ_PER_MHZ, + .sinc5_data_rates = ad7175_sinc5_data_rates, + .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), + }, +}; + +static const char *const ad7173_ref_sel_str[] = { + [AD7173_SETUP_REF_SEL_EXT_REF] = "vref", + [AD7173_SETUP_REF_SEL_EXT_REF2] = "vref2", + [AD7173_SETUP_REF_SEL_INT_REF] = "refout-avss", + [AD7173_SETUP_REF_SEL_AVDD1_AVSS] = "avdd", +}; + +static const char *const ad7173_clk_sel[] = { + "ext-clk", "xtal" +}; + +#if IS_ENABLED(CONFIG_GPIOLIB) + +static const struct regmap_range ad7173_range_gpio[] = { + regmap_reg_range(AD7173_REG_GPIO, AD7173_REG_GPIO), +}; + +static const struct regmap_access_table ad7173_access_table = { + .yes_ranges = ad7173_range_gpio, + .n_yes_ranges = ARRAY_SIZE(ad7173_range_gpio), +}; + +static const struct regmap_config ad7173_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .rd_table = &ad7173_access_table, + .wr_table = &ad7173_access_table, + .read_flag_mask = BIT(6), +}; + +static int ad7173_mask_xlate(struct gpio_regmap *gpio, unsigned int base, + unsigned int offset, unsigned int *reg, + unsigned int *mask) +{ + *mask = AD7173_GPO_DATA(offset); + *reg = base; + return 0; +} + +static void ad7173_gpio_disable(void *data) +{ + struct ad7173_state *st = data; + unsigned int mask; + + mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3; + regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, ~mask); +} + +static int ad7173_gpio_init(struct ad7173_state *st) +{ + struct gpio_regmap_config gpio_regmap = {}; + struct device *dev = &st->sd.spi->dev; + unsigned int mask; + int ret; + + st->reg_gpiocon_regmap = devm_regmap_init_spi(st->sd.spi, &ad7173_regmap_config); + ret = PTR_ERR_OR_ZERO(st->reg_gpiocon_regmap); + if (ret) + return dev_err_probe(dev, ret, "Unable to init regmap\n"); + + mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3; + regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, mask); + + ret = devm_add_action_or_reset(dev, ad7173_gpio_disable, st); + if (ret) + return ret; + + gpio_regmap.parent = dev; + gpio_regmap.regmap = st->reg_gpiocon_regmap; + gpio_regmap.ngpio = st->info->num_gpios; + gpio_regmap.reg_set_base = AD7173_REG_GPIO; + gpio_regmap.reg_mask_xlate = ad7173_mask_xlate; + + st->gpio_regmap = devm_gpio_regmap_register(dev, &gpio_regmap); + ret = PTR_ERR_OR_ZERO(st->gpio_regmap); + if (ret) + return dev_err_probe(dev, ret, "Unable to init gpio-regmap\n"); + + return 0; +} + +#endif /* CONFIG_GPIOLIB */ + +static struct ad7173_state *ad_sigma_delta_to_ad7173(struct ad_sigma_delta *sd) +{ + return container_of(sd, struct ad7173_state, sd); +} + +static struct ad7173_state *clk_hw_to_ad7173(struct clk_hw *hw) +{ + return container_of(hw, struct ad7173_state, int_clk_hw); +} + +static void ad7173_ida_destroy(void *data) +{ + struct ad7173_state *st = data; + + ida_destroy(&st->cfg_slots_status); +} + +static void ad7173_reset_usage_cnts(struct ad7173_state *st) +{ + memset64(st->config_cnts, 0, st->info->num_configs); + st->config_usage_counter = 0; +} + +static struct ad7173_channel_config * +ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg) +{ + struct ad7173_channel_config *cfg_aux; + ptrdiff_t cmp_size; + int i; + + cmp_size = sizeof_field(struct ad7173_channel_config, config_props); + for (i = 0; i < st->num_channels; i++) { + cfg_aux = &st->channels[i].cfg; + + if (cfg_aux->live && + !memcmp(&cfg->config_props, &cfg_aux->config_props, cmp_size)) + return cfg_aux; + } + return NULL; +} + +/* Could be replaced with a generic LRU implementation */ +static int ad7173_free_config_slot_lru(struct ad7173_state *st) +{ + int i, lru_position = 0; + + for (i = 1; i < st->info->num_configs; i++) + if (st->config_cnts[i] < st->config_cnts[lru_position]) + lru_position = i; + + for (i = 0; i < st->num_channels; i++) + if (st->channels[i].cfg.cfg_slot == lru_position) + st->channels[i].cfg.live = false; + + ida_free(&st->cfg_slots_status, lru_position); + return ida_alloc(&st->cfg_slots_status, GFP_KERNEL); +} + +/* Could be replaced with a generic LRU implementation */ +static int ad7173_load_config(struct ad7173_state *st, + struct ad7173_channel_config *cfg) +{ + unsigned int config; + int free_cfg_slot, ret; + + free_cfg_slot = ida_alloc_range(&st->cfg_slots_status, 0, + st->info->num_configs - 1, GFP_KERNEL); + if (free_cfg_slot < 0) + free_cfg_slot = ad7173_free_config_slot_lru(st); + + cfg->cfg_slot = free_cfg_slot; + config = FIELD_PREP(AD7173_SETUP_REF_SEL_MASK, cfg->ref_sel); + + if (cfg->bipolar) + config |= AD7173_SETUP_BIPOLAR; + + if (cfg->input_buf) + config |= AD7173_SETUP_AIN_BUF_MASK; + + ret = ad_sd_write_reg(&st->sd, AD7173_REG_SETUP(free_cfg_slot), 2, config); + if (ret) + return ret; + + return ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(free_cfg_slot), 2, + AD7173_FILTER_ODR0_MASK & cfg->odr); +} + +static int ad7173_config_channel(struct ad7173_state *st, int addr) +{ + struct ad7173_channel_config *cfg = &st->channels[addr].cfg; + struct ad7173_channel_config *live_cfg; + int ret; + + if (!cfg->live) { + live_cfg = ad7173_find_live_config(st, cfg); + if (live_cfg) { + cfg->cfg_slot = live_cfg->cfg_slot; + } else { + ret = ad7173_load_config(st, cfg); + if (ret) + return ret; + cfg->live = true; + } + } + + if (st->config_usage_counter == U64_MAX) + ad7173_reset_usage_cnts(st); + + st->config_usage_counter++; + st->config_cnts[cfg->cfg_slot] = st->config_usage_counter; + + return 0; +} + +static int ad7173_set_channel(struct ad_sigma_delta *sd, unsigned int channel) +{ + struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd); + unsigned int val; + int ret; + + ret = ad7173_config_channel(st, channel); + if (ret) + return ret; + + val = AD7173_CH_ENABLE | + FIELD_PREP(AD7173_CH_SETUP_SEL_MASK, st->channels[channel].cfg.cfg_slot) | + st->channels[channel].ain; + + return ad_sd_write_reg(&st->sd, AD7173_REG_CH(channel), 2, val); +} + +static int ad7173_set_mode(struct ad_sigma_delta *sd, + enum ad_sigma_delta_mode mode) +{ + struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd); + + st->adc_mode &= ~AD7173_ADC_MODE_MODE_MASK; + st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_MODE_MASK, mode); + + return ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 2, st->adc_mode); +} + +static int ad7173_append_status(struct ad_sigma_delta *sd, bool append) +{ + struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd); + unsigned int interface_mode = st->interface_mode; + int ret; + + interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append); + ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode); + if (ret) + return ret; + + st->interface_mode = interface_mode; + + return 0; +} + +static int ad7173_disable_all(struct ad_sigma_delta *sd) +{ + struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd); + int ret; + int i; + + for (i = 0; i < st->num_channels; i++) { + ret = ad_sd_write_reg(sd, AD7173_REG_CH(i), 2, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +static struct ad_sigma_delta_info ad7173_sigma_delta_info = { + .set_channel = ad7173_set_channel, + .append_status = ad7173_append_status, + .disable_all = ad7173_disable_all, + .set_mode = ad7173_set_mode, + .has_registers = true, + .addr_shift = 0, + .read_mask = BIT(6), + .status_ch_mask = GENMASK(3, 0), + .data_reg = AD7173_REG_DATA, +}; + +static int ad7173_setup(struct iio_dev *indio_dev) +{ + struct ad7173_state *st = iio_priv(indio_dev); + struct device *dev = &st->sd.spi->dev; + u8 buf[AD7173_RESET_LENGTH]; + unsigned int id; + int ret; + + /* reset the serial interface */ + memset(buf, 0xff, AD7173_RESET_LENGTH); + ret = spi_write_then_read(st->sd.spi, buf, sizeof(buf), NULL, 0); + if (ret < 0) + return ret; + + /* datasheet recommends a delay of at least 500us after reset */ + fsleep(500); + + ret = ad_sd_read_reg(&st->sd, AD7173_REG_ID, 2, &id); + if (ret) + return ret; + + id &= AD7173_ID_MASK; + if (id != st->info->id) + dev_warn(dev, "Unexpected device id: 0x%04X, expected: 0x%04X\n", + id, st->info->id); + + st->adc_mode |= AD7173_ADC_MODE_SING_CYC; + st->interface_mode = 0x0; + + st->config_usage_counter = 0; + st->config_cnts = devm_kcalloc(dev, st->info->num_configs, + sizeof(*st->config_cnts), GFP_KERNEL); + if (!st->config_cnts) + return -ENOMEM; + + /* All channels are enabled by default after a reset */ + return ad7173_disable_all(&st->sd); +} + +static unsigned int ad7173_get_ref_voltage_milli(struct ad7173_state *st, + u8 reference_select) +{ + int vref; + + switch (reference_select) { + case AD7173_SETUP_REF_SEL_EXT_REF: + vref = regulator_get_voltage(st->regulators[0].consumer); + break; + + case AD7173_SETUP_REF_SEL_EXT_REF2: + vref = regulator_get_voltage(st->regulators[1].consumer); + break; + + case AD7173_SETUP_REF_SEL_INT_REF: + vref = AD7173_VOLTAGE_INT_REF_uV; + break; + + case AD7173_SETUP_REF_SEL_AVDD1_AVSS: + vref = regulator_get_voltage(st->regulators[2].consumer); + break; + + default: + return -EINVAL; + } + + if (vref < 0) + return vref; + + return vref / (MICRO / MILLI); +} + +static int ad7173_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ad7173_state *st = iio_priv(indio_dev); + struct ad7173_channel *ch = &st->channels[chan->address]; + unsigned int reg; + u64 temp; + int ret; + + switch (info) { + case IIO_CHAN_INFO_RAW: + ret = ad_sigma_delta_single_conversion(indio_dev, chan, val); + if (ret < 0) + return ret; + + /* disable channel after single conversion */ + ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(chan->address), 2, 0); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + temp = AD7173_VOLTAGE_INT_REF_uV * MILLI; + temp /= AD7173_TEMP_SENSIIVITY_uV_per_C; + *val = temp; + *val2 = chan->scan_type.realbits; + } else { + *val = ad7173_get_ref_voltage_milli(st, ch->cfg.ref_sel); + *val2 = chan->scan_type.realbits - !!(ch->cfg.bipolar); + } + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + /* 0 Kelvin -> raw sample */ + temp = -ABSOLUTE_ZERO_MILLICELSIUS; + temp *= AD7173_TEMP_SENSIIVITY_uV_per_C; + temp <<= chan->scan_type.realbits; + temp = DIV_U64_ROUND_CLOSEST(temp, + AD7173_VOLTAGE_INT_REF_uV * + MILLI); + *val = -temp; + } else { + *val = -BIT(chan->scan_type.realbits - 1); + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + reg = st->channels[chan->address].cfg.odr; + + *val = st->info->sinc5_data_rates[reg] / MILLI; + *val2 = (st->info->sinc5_data_rates[reg] % MILLI) * (MICRO / MILLI); + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int ad7173_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ad7173_state *st = iio_priv(indio_dev); + struct ad7173_channel_config *cfg; + unsigned int freq, i, reg; + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + freq = val * MILLI + val2 / MILLI; + for (i = 0; i < st->info->num_sinc5_data_rates - 1; i++) + if (freq >= st->info->sinc5_data_rates[i]) + break; + + cfg = &st->channels[chan->address].cfg; + cfg->odr = i; + + if (!cfg->live) + break; + + ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, ®); + if (ret) + break; + reg &= ~AD7173_FILTER_ODR0_MASK; + reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i); + ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, reg); + break; + + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + return ret; +} + +static int ad7173_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ad7173_state *st = iio_priv(indio_dev); + int i, ret; + + for (i = 0; i < indio_dev->num_channels; i++) { + if (test_bit(i, scan_mask)) + ret = ad7173_set_channel(&st->sd, i); + else + ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(i), 2, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +static int ad7173_debug_reg_access(struct iio_dev *indio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct ad7173_state *st = iio_priv(indio_dev); + u8 reg_size; + + if (reg == AD7173_REG_COMMS) + reg_size = 1; + else if (reg == AD7173_REG_CRC || reg == AD7173_REG_DATA || + reg >= AD7173_REG_OFFSET(0)) + reg_size = 3; + else + reg_size = 2; + + if (readval) + return ad_sd_read_reg(&st->sd, reg, reg_size, readval); + + return ad_sd_write_reg(&st->sd, reg, reg_size, writeval); +} + +static const struct iio_info ad7173_info = { + .read_raw = &ad7173_read_raw, + .write_raw = &ad7173_write_raw, + .debugfs_reg_access = &ad7173_debug_reg_access, + .validate_trigger = ad_sd_validate_trigger, + .update_scan_mode = ad7173_update_scan_mode, +}; + +static const struct iio_chan_spec ad7173_channel_template = { + .type = IIO_VOLTAGE, + .indexed = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_BE, + }, +}; + +static const struct iio_chan_spec ad7173_temp_iio_channel_template = { + .type = IIO_TEMP, + .indexed = 1, + .channel = AD7173_AIN_TEMP_POS, + .channel2 = AD7173_AIN_TEMP_NEG, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_BE, + }, +}; + +static void ad7173_disable_regulators(void *data) +{ + struct ad7173_state *st = data; + + regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators); +} + +static void ad7173_clk_disable_unprepare(void *clk) +{ + clk_disable_unprepare(clk); +} + +static unsigned long ad7173_sel_clk(struct ad7173_state *st, + unsigned int clk_sel) +{ + int ret; + + st->adc_mode &= !AD7173_ADC_MODE_CLOCKSEL_MASK; + st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, clk_sel); + ret = ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 0x2, st->adc_mode); + + return ret; +} + +static unsigned long ad7173_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ad7173_state *st = clk_hw_to_ad7173(hw); + + return st->info->clock / HZ_PER_KHZ; +} + +static int ad7173_clk_output_is_enabled(struct clk_hw *hw) +{ + struct ad7173_state *st = clk_hw_to_ad7173(hw); + u32 clk_sel; + + clk_sel = FIELD_GET(AD7173_ADC_MODE_CLOCKSEL_MASK, st->adc_mode); + return clk_sel == AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT; +} + +static int ad7173_clk_output_prepare(struct clk_hw *hw) +{ + struct ad7173_state *st = clk_hw_to_ad7173(hw); + + return ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT); +} + +static void ad7173_clk_output_unprepare(struct clk_hw *hw) +{ + struct ad7173_state *st = clk_hw_to_ad7173(hw); + + ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT); +} + +static const struct clk_ops ad7173_int_clk_ops = { + .recalc_rate = ad7173_clk_recalc_rate, + .is_enabled = ad7173_clk_output_is_enabled, + .prepare = ad7173_clk_output_prepare, + .unprepare = ad7173_clk_output_unprepare, +}; + +static int ad7173_register_clk_provider(struct iio_dev *indio_dev) +{ + struct ad7173_state *st = iio_priv(indio_dev); + struct device *dev = indio_dev->dev.parent; + struct fwnode_handle *fwnode = dev_fwnode(dev); + struct clk_init_data init = {}; + int ret; + + if (!IS_ENABLED(CONFIG_COMMON_CLK)) + return 0; + + init.name = fwnode_get_name(fwnode); + init.ops = &ad7173_int_clk_ops; + + st->int_clk_hw.init = &init; + ret = devm_clk_hw_register(dev, &st->int_clk_hw); + if (ret) + return ret; + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &st->int_clk_hw); +} + +static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) +{ + struct ad7173_channel *chans_st_arr, *chan_st_priv; + struct ad7173_state *st = iio_priv(indio_dev); + struct device *dev = indio_dev->dev.parent; + struct iio_chan_spec *chan_arr, *chan; + unsigned int ain[2], chan_index = 0; + struct fwnode_handle *child; + int ref_sel, ret; + + if (st->info->has_temp) { + chan_arr[chan_index] = ad7173_temp_iio_channel_template; + chan_st_priv = &chans_st_arr[chan_index]; + chan_st_priv->ain = + AD7173_CH_ADDRESS(chan_arr[chan_index].channel, chan_arr[chan_index].channel2); + chan_st_priv->cfg.bipolar = false; + chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF; + st->adc_mode |= AD7173_ADC_MODE_REF_EN; + + chan_index++; + } + + device_for_each_child_node(dev, child) { + chan = &chan_arr[chan_index]; + chan_st_priv = &chans_st_arr[chan_index]; + ret = fwnode_property_read_u32_array(child, "diff-channels", + ain, ARRAY_SIZE(ain)); + if (ret) { + fwnode_handle_put(child); + return ret; + } + + if (ain[0] >= st->info->num_inputs || + ain[1] >= st->info->num_inputs) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, + "Input pin number out of range for pair (%d %d).\n", + ain[0], ain[1]); + } + + ret = fwnode_property_match_property_string(child, + "adi,reference-select", + ad7173_ref_sel_str, + ARRAY_SIZE(ad7173_ref_sel_str)); + if (ret < 0) + ref_sel = AD7173_SETUP_REF_SEL_INT_REF; + else + ref_sel = ret; + + if (ref_sel == AD7173_SETUP_REF_SEL_EXT_REF2 && + st->info->id != AD7173_ID) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, "External reference 2 is only available on ad7173-8\n"); + } + + ret = ad7173_get_ref_voltage_milli(st, ref_sel); + if (ret < 0) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, + "Cannot use reference %u\n", ref_sel); + } + if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF) + st->adc_mode |= AD7173_ADC_MODE_REF_EN; + chan_st_priv->cfg.ref_sel = ref_sel; + + *chan = ad7173_channel_template; + chan->address = chan_index; + chan->scan_index = chan_index; + chan->channel = ain[0]; + chan->channel2 = ain[1]; + chan->differential = true; + + chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]); + chan_st_priv->chan_reg = chan_index; + chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.odr = 0; + + chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar"); + if (chan_st_priv->cfg.bipolar) + chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET); + + chan_index++; + } + return 0; +} + +static int ad7173_fw_parse_device_config(struct iio_dev *indio_dev) +{ + struct ad7173_state *st = iio_priv(indio_dev); + struct device *dev = indio_dev->dev.parent; + unsigned int num_channels; + int ret; + + st->regulators[0].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF]; + st->regulators[1].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF2]; + st->regulators[2].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_AVDD1_AVSS]; + + /* + * If a regulator is not available, it will be set to a dummy regulator. + * Each channel reference is checked with regulator_get_voltage() before + * setting attributes so if any channel uses a dummy supply the driver + * probe will fail. + */ + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators), + st->regulators); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable regulators\n"); + + ret = devm_add_action_or_reset(dev, ad7173_disable_regulators, st); + if (ret) + return dev_err_probe(dev, ret, + "Failed to add regulators disable action\n"); + + ret = device_property_match_property_string(dev, "clock-names", + ad7173_clk_sel, + ARRAY_SIZE(ad7173_clk_sel)); + if (ret < 0) { + st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, AD7173_ADC_MODE_CLOCKSEL_INT); + ad7173_register_clk_provider(indio_dev); + } else { + st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, AD7173_ADC_MODE_CLOCKSEL_EXT + ret); + st->ext_clk = devm_clk_get(dev, ad7173_clk_sel[ret]); + if (IS_ERR(st->ext_clk)) + return dev_err_probe(dev, PTR_ERR(st->ext_clk), + "Failed to get external clock\n"); + + ret = clk_prepare_enable(st->ext_clk); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable external clock\n"); + + ret = devm_add_action_or_reset(dev, ad7173_clk_disable_unprepare, + st->ext_clk); + if (ret) + return ret; + } + + ret = fwnode_irq_get_byname(dev_fwnode(dev), "rdy"); + if (ret < 0) + return dev_err_probe(dev, ret, "Interrupt 'rdy' is required\n"); + + ad7173_sigma_delta_info.irq_line = ret; + + num_channels = device_get_child_node_count(dev); + + if (st->info->has_temp) + num_channels++; + + if (num_channels == 0) + return dev_err_probe(dev, -ENODATA, "No channels specified\n"); + st->num_channels = num_channels; + + indio_dev->channels = devm_kcalloc(dev, sizeof(*indio_dev->channels), + num_channels, GFP_KERNEL); + if (!indio_dev->channels) + return -ENOMEM; + + st->channels = devm_kcalloc(dev, num_channels, sizeof(*st->channels), + GFP_KERNEL); + if (!st->channels) + return -ENOMEM; + + indio_dev->num_channels = num_channels; + return ad7173_fw_parse_channel_config(indio_dev); +} + +static int ad7173_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct ad7173_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->info = spi_get_device_match_data(spi); + if (!st->info) + return -ENODEV; + + ida_init(&st->cfg_slots_status); + ret = devm_add_action_or_reset(dev, ad7173_ida_destroy, st); + if (ret) + return ret; + + indio_dev->name = st->info->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &ad7173_info; + + spi->mode = SPI_MODE_3; + spi_setup(spi); + + ad7173_sigma_delta_info.num_slots = st->info->num_configs; + ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7173_sigma_delta_info); + if (ret) + return ret; + + ret = ad7173_fw_parse_device_config(indio_dev); + if (ret) + return ret; + + ret = devm_ad_sd_setup_buffer_and_trigger(dev, indio_dev); + if (ret) + return ret; + + ret = ad7173_setup(indio_dev); + if (ret) + return ret; + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + return ret; + + if (IS_ENABLED(CONFIG_GPIOLIB)) + return ad7173_gpio_init(st); + + return 0; +} + +static const struct of_device_id ad7173_of_match[] = { + { .compatible = "adi,ad7172-2", + .data = &ad7173_device_info[ID_AD7172_2]}, + { .compatible = "adi,ad7173-8", + .data = &ad7173_device_info[ID_AD7173_8]}, + { .compatible = "adi,ad7175-2", + .data = &ad7173_device_info[ID_AD7175_2]}, + { .compatible = "adi,ad7176-2", + .data = &ad7173_device_info[ID_AD7176_2]}, + { } +}; +MODULE_DEVICE_TABLE(of, ad7173_of_match); + +static const struct spi_device_id ad7173_id_table[] = { + { "ad7172-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7172_2]}, + { "ad7173-8", (kernel_ulong_t)&ad7173_device_info[ID_AD7173_8]}, + { "ad7175-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7175_2]}, + { "ad7176-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7176_2]}, + { } +}; +MODULE_DEVICE_TABLE(spi, ad7173_id_table); + +static struct spi_driver ad7173_driver = { + .driver = { + .name = "ad7173", + .of_match_table = ad7173_of_match, + }, + .probe = ad7173_probe, + .id_table = ad7173_id_table, +}; +module_spi_driver(ad7173_driver); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_AUTHOR("Dumitru Ceclan "); +MODULE_DESCRIPTION("Analog Devices AD7172/AD7173/AD7175/AD7176 ADC driver"); +MODULE_LICENSE("GPL");