From patchwork Fri Mar 15 14:35:55 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 13593537 X-Patchwork-Delegate: geert@linux-m68k.org Received: from relmlie5.idc.renesas.com (relmlor1.renesas.com [210.160.252.171]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 2211A37145; Fri, 15 Mar 2024 14:36:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=210.160.252.171 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513383; cv=none; b=l2MI08FfQNcJ4Mlo23S7T187WneR5Ifzsh+sRn0mn+5efOTM+PeIOBlpItxDmeBMesemDd3sA/Zk3eLnAYuwY615Cv3PlYj3hfgVJe1czS0vPX61QGznbPnukrTeLIbGQK7fcUtcJQBJnYfsFWnszHtHSEX8NKcNDgum1ekqmEM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513383; c=relaxed/simple; bh=2x1aC9o19gLgK+YXLsUZoQMQ1ZELG3SU5UOC7zlgy4s=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=P3yM6zSwGIwhe4D3/AMOJtdHeTLdg2I+ymAEdZaaIUM+ZGVt6+S/lVHn8WGG7DBLnjnWH//uCrNqjdlimdRceFcIzAm61RwQ4fSOILit7KrUHcud2TqcnEfHnVGZrDoszSd1ltrm27hvxdqPwNN1g2cQRw3/m53o+zPKZMmDPgM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com; spf=pass smtp.mailfrom=bp.renesas.com; arc=none smtp.client-ip=210.160.252.171 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bp.renesas.com X-IronPort-AV: E=Sophos;i="6.07,128,1708354800"; d="scan'208";a="197901593" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie5.idc.renesas.com with ESMTP; 15 Mar 2024 23:36:10 +0900 Received: from localhost.localdomain (unknown [10.226.93.102]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 85F10435BA56; Fri, 15 Mar 2024 23:36:06 +0900 (JST) From: Biju Das To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: Biju Das , Geert Uytterhoeven , Magnus Damm , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, Fabrizio Castro , linux-renesas-soc@vger.kernel.org, Prabhakar Mahadev Lad , Biju Das Subject: [PATCH v19 1/4] dt-bindings: pwm: Add RZ/G2L GPT binding Date: Fri, 15 Mar 2024 14:35:55 +0000 Message-Id: <20240315143558.221340-2-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> References: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> Precedence: bulk X-Mailing-List: linux-renesas-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add device tree bindings for the General PWM Timer (GPT). Signed-off-by: Biju Das Reviewed-by: Rob Herring --- v18->v19: * No change. v17->v18: * No change. v16->v17: * No change. v15->v16: * No change. v14->v15: * No change. v13->v14: * No change. v12->v13: * No change. v11->v12: * No change. v10->v11: * No change. v9->v10: * Updated the example gpt4: pwm@10048400-> gpt: pwm@10048000 * Keep Rb tag from Rob as the above change is trivial one. v8->v9: * Added Rb tag from Rob. v7->v8: * Removed Rb tags from Rob and Geert as it modelled as single GPT device handling multiple channels. * Updated description * Updated interrupts and interrupt-names properties * Updated example v6->v7: * No change. v5->v6: * No change. v4->v5: * No change. v3->v4: * No change. v2->v3: * Added Rb tag from Rob. v1->v2: * Added '|' after 'description:' to preserve formatting. * Removed description for pwm_cells as it is common property. * Changed the reg size in example from 0xa4->0x100 * Added Rb tag from Geert. RFC->v1: * Added Description * Removed comments from reg and clock --- .../bindings/pwm/renesas,rzg2l-gpt.yaml | 378 ++++++++++++++++++ 1 file changed, 378 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml diff --git a/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml b/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml new file mode 100644 index 000000000000..d9374144d82d --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml @@ -0,0 +1,378 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/renesas,rzg2l-gpt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L General PWM Timer (GPT) + +maintainers: + - Biju Das + +description: | + RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer + (GPT32E). It supports the following functions + * 32 bits x 8 channels. + * Up-counting or down-counting (saw waves) or up/down-counting + (triangle waves) for each counter. + * Clock sources independently selectable for each channel. + * Two I/O pins per channel. + * Two output compare/input capture registers per channel. + * For the two output compare/input capture registers of each channel, + four registers are provided as buffer registers and are capable of + operating as comparison registers when buffering is not in use. + * In output compare operation, buffer switching can be at crests or + troughs, enabling the generation of laterally asymmetric PWM waveforms. + * Registers for setting up frame cycles in each channel (with capability + for generating interrupts at overflow or underflow) + * Generation of dead times in PWM operation. + * Synchronous starting, stopping and clearing counters for arbitrary + channels. + * Starting, stopping, clearing and up/down counters in response to input + level comparison. + * Starting, clearing, stopping and up/down counters in response to a + maximum of four external triggers. + * Output pin disable function by dead time error and detected + short-circuits between output pins. + * A/D converter start triggers can be generated (GPT32E0 to GPT32E3) + * Enables the noise filter for input capture and external trigger + operation. + + The below pwm channels are supported. + pwm0 - GPT32E0.GTIOC0A channel + pwm1 - GPT32E0.GTIOC0B channel + pwm2 - GPT32E1.GTIOC1A channel + pwm3 - GPT32E1.GTIOC1B channel + pwm4 - GPT32E2.GTIOC2A channel + pwm5 - GPT32E2.GTIOC2B channel + pwm6 - GPT32E3.GTIOC3A channel + pwm7 - GPT32E3.GTIOC3B channel + pwm8 - GPT32E4.GTIOC4A channel + pwm9 - GPT32E4.GTIOC4B channel + pwm10 - GPT32E5.GTIOC5A channel + pwm11 - GPT32E5.GTIOC5B channel + pwm12 - GPT32E6.GTIOC6A channel + pwm13 - GPT32E6.GTIOC6B channel + pwm14 - GPT32E7.GTIOC7A channel + pwm15 - GPT32E7.GTIOC7B channel + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-gpt # RZ/G2{L,LC} + - renesas,r9a07g054-gpt # RZ/V2L + - const: renesas,rzg2l-gpt + + reg: + maxItems: 1 + + '#pwm-cells': + const: 2 + + interrupts: + items: + - description: GPT32E0.GTCCRA input capture/compare match + - description: GPT32E0.GTCCRB input capture/compare + - description: GPT32E0.GTCCRC compare match + - description: GPT32E0.GTCCRD compare match + - description: GPT32E0.GTCCRE compare match + - description: GPT32E0.GTCCRF compare match + - description: GPT32E0.GTADTRA compare match + - description: GPT32E0.GTADTRB compare match + - description: GPT32E0.GTCNT overflow/GTPR compare match + - description: GPT32E0.GTCNT underflow + - description: GPT32E1.GTCCRA input capture/compare match + - description: GPT32E1.GTCCRB input capture/compare + - description: GPT32E1.GTCCRC compare match + - description: GPT32E1.GTCCRD compare match + - description: GPT32E1.GTCCRE compare match + - description: GPT32E1.GTCCRF compare match + - description: GPT32E1.GTADTRA compare match + - description: GPT32E1.GTADTRB compare match + - description: GPT32E1.GTCNT overflow/GTPR compare match + - description: GPT32E1.GTCNT underflow + - description: GPT32E2.GTCCRA input capture/compare match + - description: GPT32E2.GTCCRB input capture/compare + - description: GPT32E2.GTCCRC compare match + - description: GPT32E2.GTCCRD compare match + - description: GPT32E2.GTCCRE compare match + - description: GPT32E2.GTCCRF compare match + - description: GPT32E2.GTADTRA compare match + - description: GPT32E2.GTADTRB compare match + - description: GPT32E2.GTCNT overflow/GTPR compare match + - description: GPT32E2.GTCNT underflow + - description: GPT32E3.GTCCRA input capture/compare match + - description: GPT32E3.GTCCRB input capture/compare + - description: GPT32E3.GTCCRC compare match + - description: GPT32E3.GTCCRD compare match + - description: GPT32E3.GTCCRE compare match + - description: GPT32E3.GTCCRF compare match + - description: GPT32E3.GTADTRA compare match + - description: GPT32E3.GTADTRB compare match + - description: GPT32E3.GTCNT overflow/GTPR compare match + - description: GPT32E3.GTCNT underflow + - description: GPT32E4.GTCCRA input capture/compare match + - description: GPT32E4.GTCCRB input capture/compare + - description: GPT32E4.GTCCRC compare match + - description: GPT32E4.GTCCRD compare match + - description: GPT32E4.GTCCRE compare match + - description: GPT32E4.GTCCRF compare match + - description: GPT32E4.GTADTRA compare match + - description: GPT32E4.GTADTRB compare match + - description: GPT32E4.GTCNT overflow/GTPR compare match + - description: GPT32E4.GTCNT underflow + - description: GPT32E5.GTCCRA input capture/compare match + - description: GPT32E5.GTCCRB input capture/compare + - description: GPT32E5.GTCCRC compare match + - description: GPT32E5.GTCCRD compare match + - description: GPT32E5.GTCCRE compare match + - description: GPT32E5.GTCCRF compare match + - description: GPT32E5.GTADTRA compare match + - description: GPT32E5.GTADTRB compare match + - description: GPT32E5.GTCNT overflow/GTPR compare match + - description: GPT32E5.GTCNT underflow + - description: GPT32E6.GTCCRA input capture/compare match + - description: GPT32E6.GTCCRB input capture/compare + - description: GPT32E6.GTCCRC compare match + - description: GPT32E6.GTCCRD compare match + - description: GPT32E6.GTCCRE compare match + - description: GPT32E6.GTCCRF compare match + - description: GPT32E6.GTADTRA compare match + - description: GPT32E6.GTADTRB compare match + - description: GPT32E6.GTCNT overflow/GTPR compare match + - description: GPT32E6.GTCNT underflow + - description: GPT32E7.GTCCRA input capture/compare match + - description: GPT32E7.GTCCRB input capture/compare + - description: GPT32E7.GTCCRC compare match + - description: GPT32E7.GTCCRD compare match + - description: GPT32E7.GTCCRE compare match + - description: GPT32E7.GTCCRF compare match + - description: GPT32E7.GTADTRA compare match + - description: GPT32E7.GTADTRB compare match + - description: GPT32E7.GTCNT overflow/GTPR compare match + - description: GPT32E7.GTCNT underflow + + interrupt-names: + items: + - const: ccmpa0 + - const: ccmpb0 + - const: cmpc0 + - const: cmpd0 + - const: cmpe0 + - const: cmpf0 + - const: adtrga0 + - const: adtrgb0 + - const: ovf0 + - const: unf0 + - const: ccmpa1 + - const: ccmpb1 + - const: cmpc1 + - const: cmpd1 + - const: cmpe1 + - const: cmpf1 + - const: adtrga1 + - const: adtrgb1 + - const: ovf1 + - const: unf1 + - const: ccmpa2 + - const: ccmpb2 + - const: cmpc2 + - const: cmpd2 + - const: cmpe2 + - const: cmpf2 + - const: adtrga2 + - const: adtrgb2 + - const: ovf2 + - const: unf2 + - const: ccmpa3 + - const: ccmpb3 + - const: cmpc3 + - const: cmpd3 + - const: cmpe3 + - const: cmpf3 + - const: adtrga3 + - const: adtrgb3 + - const: ovf3 + - const: unf3 + - const: ccmpa4 + - const: ccmpb4 + - const: cmpc4 + - const: cmpd4 + - const: cmpe4 + - const: cmpf4 + - const: adtrga4 + - const: adtrgb4 + - const: ovf4 + - const: unf4 + - const: ccmpa5 + - const: ccmpb5 + - const: cmpc5 + - const: cmpd5 + - const: cmpe5 + - const: cmpf5 + - const: adtrga5 + - const: adtrgb5 + - const: ovf5 + - const: unf5 + - const: ccmpa6 + - const: ccmpb6 + - const: cmpc6 + - const: cmpd6 + - const: cmpe6 + - const: cmpf6 + - const: adtrga6 + - const: adtrgb6 + - const: ovf6 + - const: unf6 + - const: ccmpa7 + - const: ccmpb7 + - const: cmpc7 + - const: cmpd7 + - const: cmpe7 + - const: cmpf7 + - const: adtrga7 + - const: adtrgb7 + - const: ovf7 + - const: unf7 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + +allOf: + - $ref: pwm.yaml# + +additionalProperties: false + +examples: + - | + #include + #include + + gpt: pwm@10048000 { + compatible = "renesas,r9a07g044-gpt", "renesas,rzg2l-gpt"; + reg = <0x10048000 0x800>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0", + "cmpe0", "cmpf0", "adtrga0", "adtrgb0", + "ovf0", "unf0", + "ccmpa1", "ccmpb1", "cmpc1", "cmpd1", + "cmpe1", "cmpf1", "adtrga1", "adtrgb1", + "ovf1", "unf1", + "ccmpa2", "ccmpb2", "cmpc2", "cmpd2", + "cmpe2", "cmpf2", "adtrga2", "adtrgb2", + "ovf2", "unf2", + "ccmpa3", "ccmpb3", "cmpc3", "cmpd3", + "cmpe3", "cmpf3", "adtrga3", "adtrgb3", + "ovf3", "unf3", + "ccmpa4", "ccmpb4", "cmpc4", "cmpd4", + "cmpe4", "cmpf4", "adtrga4", "adtrgb4", + "ovf4", "unf4", + "ccmpa5", "ccmpb5", "cmpc5", "cmpd5", + "cmpe5", "cmpf5", "adtrga5", "adtrgb5", + "ovf5", "unf5", + "ccmpa6", "ccmpb6", "cmpc6", "cmpd6", + "cmpe6", "cmpf6", "adtrga6", "adtrgb6", + "ovf6", "unf6", + "ccmpa7", "ccmpb7", "cmpc7", "cmpd7", + "cmpe7", "cmpf7", "adtrga7", "adtrgb7", + "ovf7", "unf7"; + clocks = <&cpg CPG_MOD R9A07G044_GPT_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_GPT_RST_C>; + #pwm-cells = <2>; + }; From patchwork Fri Mar 15 14:35:56 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 13593539 X-Patchwork-Delegate: geert@linux-m68k.org Received: from relmlie5.idc.renesas.com (relmlor1.renesas.com [210.160.252.171]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 5D75F37145; Fri, 15 Mar 2024 14:36:23 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=210.160.252.171 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513385; cv=none; b=gyWLKb9SHqfsQpyi/amm9wC7Pu8WQZIh0Ya/hB6Yn4RXDlH5hORDUJA9HRZWqNA/NswoGvCQQI+3LVYaI4TpbxzJ41RTWbJC63cTGpDH0XvTFMtS2yfHeGJYdx39Pn2Fxeh2RALUxXScvytePKVY0ouwMEDF0sLB6ksa4nUkPCU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513385; c=relaxed/simple; bh=zy9KGCSyKGkFhfSQnDv88uutMsJBfYRH3LuZ0rpvEpQ=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=OkDu1CR0ycG+nRqN495gE6ppP13IPqgA7h6KcTgXdRRVUkAf8goycyM/VyrTPVWnixAvhNci1l06qpgra9A6W+89pmj/uVxquwezx8ZshZNM9BgqwYr5jqiTp+kxow5m9mZjmB8yqsRKZIT2J9ueTIB2Y1X0jjWrV7XwB1lj1bs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com; spf=pass smtp.mailfrom=bp.renesas.com; arc=none smtp.client-ip=210.160.252.171 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bp.renesas.com X-IronPort-AV: E=Sophos;i="6.07,128,1708354800"; d="scan'208";a="197901601" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie5.idc.renesas.com with ESMTP; 15 Mar 2024 23:36:14 +0900 Received: from localhost.localdomain (unknown [10.226.93.102]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 04A98435BA56; Fri, 15 Mar 2024 23:36:10 +0900 (JST) From: Biju Das To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: Biju Das , Geert Uytterhoeven , Magnus Damm , Fabrizio Castro , linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Prabhakar Mahadev Lad , Biju Das Subject: [PATCH v19 2/4] dt-bindings: pwm: rzg2l-gpt: Document renesas,poegs property Date: Fri, 15 Mar 2024 14:35:56 +0000 Message-Id: <20240315143558.221340-3-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> References: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> Precedence: bulk X-Mailing-List: linux-renesas-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 RZ/G2L GPT IP supports output pin disable function by dead time error and detecting short-circuits between output pins. Add documentation for the optional property renesas,poegs to link a pair of GPT IOs with POEG. Signed-off-by: Biju Das Reviewed-by: Rob Herring --- v18->v19: * No change. v17->v18: * No change. v16->v17: * No change. v15->v16: * No change. v14->v15: * No change. v3->v14: * Add Rb tag from Rob. * Moved the patch from series[1] to here. [1] https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-biju.das.jz@bp.renesas.com/T/#t v2->v3: * Moved minItems/MaxItems one level up. v1->v2: * removed quotes from ref * Added maxItems and minItems for renesas,poegs property * Added enums for gpt index --- .../bindings/pwm/renesas,rzg2l-gpt.yaml | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml b/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml index d9374144d82d..957cf28b2c4c 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml @@ -245,6 +245,28 @@ properties: resets: maxItems: 1 + renesas,poegs: + minItems: 1 + maxItems: 8 + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to POEG instance that serves the output disable + - enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + An index identifying pair of GPT channels. + <0> : GPT channels 0 and 1 + <1> : GPT channels 2 and 3 + <2> : GPT channels 4 and 5 + <3> : GPT channels 6 and 7 + <4> : GPT channels 8 and 9 + <5> : GPT channels 10 and 11 + <6> : GPT channels 12 and 13 + <7> : GPT channels 14 and 15 + description: + A list of phandle and channel index pair tuples to the POEGs that handle the + output disable for the GPT channels. + required: - compatible - reg @@ -375,4 +397,5 @@ examples: power-domains = <&cpg>; resets = <&cpg R9A07G044_GPT_RST_C>; #pwm-cells = <2>; + renesas,poegs = <&poeggd 4>; }; From patchwork Fri Mar 15 14:35:57 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 13593540 X-Patchwork-Delegate: geert@linux-m68k.org Received: from relmlie5.idc.renesas.com (relmlor1.renesas.com [210.160.252.171]) by smtp.subspace.kernel.org (Postfix) with ESMTP id A6D8C335C0; Fri, 15 Mar 2024 14:36:24 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=210.160.252.171 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513388; cv=none; b=i/qVtY79afvaIs9QOutPLUtUHJgUDMJsuoeuPCz1vnepvV1A/Sk9GHbbX+cazoDu/aKEUOUjetFzhJBx9gLRDZXRNuvzaEIcHoGrQzcGc4DBPAs96VEVY91A/k5+YALAXXzJujOJXaC8KjMgjvLjlEp6eO6imntXdikokGi1xjU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513388; c=relaxed/simple; bh=S5bDpVNm0zSIb4MD3Q3/e/RPDPaojRX4eLzhmTokIRg=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=SOUK8Xsztsc/FvzBG9c5pWFVTLJs7TWaH/YSseDuivBeZgZG2/kCkX4bxdVB/FeYfmSvBspH2Rr3FlL0gHqRI2HQ6wCQ+yBPNfsshgYR15Rzf+q7d0IX2ntqn8tvNf4CbOfZ3R1ikqDUAoc/RVh7PPLu0M/sD5G0c7Il/yeQOLE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com; spf=pass smtp.mailfrom=bp.renesas.com; arc=none smtp.client-ip=210.160.252.171 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bp.renesas.com X-IronPort-AV: E=Sophos;i="6.07,128,1708354800"; d="scan'208";a="197901604" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie5.idc.renesas.com with ESMTP; 15 Mar 2024 23:36:18 +0900 Received: from localhost.localdomain (unknown [10.226.93.102]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 75237435BA4C; Fri, 15 Mar 2024 23:36:15 +0900 (JST) From: Biju Das To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Philipp Zabel Cc: Biju Das , Geert Uytterhoeven , Fabrizio Castro , Magnus Damm , linux-pwm@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Prabhakar Mahadev Lad , Biju Das Subject: [PATCH v19 3/4] pwm: Add support for RZ/G2L GPT Date: Fri, 15 Mar 2024 14:35:57 +0000 Message-Id: <20240315143558.221340-4-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> References: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> Precedence: bulk X-Mailing-List: linux-renesas-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer (GPT32E). It supports the following functions * 32 bits x 8 channels * Up-counting or down-counting (saw waves) or up/down-counting (triangle waves) for each counter. * Clock sources independently selectable for each channel * Two I/O pins per channel * Two output compare/input capture registers per channel * For the two output compare/input capture registers of each channel, four registers are provided as buffer registers and are capable of operating as comparison registers when buffering is not in use. * In output compare operation, buffer switching can be at crests or troughs, enabling the generation of laterally asymmetric PWM waveforms. * Registers for setting up frame cycles in each channel (with capability for generating interrupts at overflow or underflow) * Generation of dead times in PWM operation * Synchronous starting, stopping and clearing counters for arbitrary channels * Starting, stopping, clearing and up/down counters in response to input level comparison * Starting, clearing, stopping and up/down counters in response to a maximum of four external triggers * Output pin disable function by dead time error and detected short-circuits between output pins * A/D converter start triggers can be generated (GPT32E0 to GPT32E3) * Enables the noise filter for input capture and external trigger operation Add basic pwm support for RZ/G2L GPT driver by creating separate logical channels for each IOs. Signed-off-by: Biju Das --- v18->v19: * Replaced RZG2L_UP_COUNTING->RZG2L_GTUDDTYC_UP_COUNTING macro. * Aligned RZG2L_GET_CH and RZG2L_GET_CH_OFFS macro * Dropped chip and clk from struct rzg2l_gpt_chip as started using devm_pwmchip_alloc() and devm_clk_rate_exclusive_get() to replace it. * Replaced rate->rate_khz in struct rzg2l_gpt_chip and added a check in probe() to make sure rate is multiple of 1000. * Replaced container_of->pwmchip_get_drvdata() to get device data. * Added a check in rzg2l_gpt_disable() not to decrement enable_count if ch_en_bits is set by the probe. * Dropped rzg2l_gpt_mul_u64_u64_div_u64() * Simplified calculate_period_or_duty() using rate_khz * Simplified rzg2l_gpt_config() using min macro for calculating period and duty_cycle. * Added checks in rzg2l_gpt_config() to prevent second channel setting shared register. * Updated error handling rzg2l_gpt_apply() * Added local variable dev for &pdev->dev in probe() * Added local varibles rate, chip and clk in probe() * Dropped err_clk_rate_put label as started using devm_clk_rate_exclusive_get() * Replaced rzg2l_gpt->chip as data for devm_add_action_or_reset(). * Added error message for rate > 1GHz in probe. v17->v18: * Updated copyright from 2023->2024. * Added units.h for KILO macro. * Replaced RZG2L_GTCCR{A,B}->RZG2L_GTCCR(i) * Introduced macros RZG2L_GTIOR_{GTIOx,OxE} to handle subchannels. * Replaced RZG2L_IS_IOB()->rzg2l_gpt_subchannel() * Replaced the cache period->period_cycles. * Updated rzg2l_gpt_is_ch_enabled() to return early if counter is not running. * Updated calculate_period_or_duty() for avoiding overflows. * Updated rzg2l_gpt_calculate_pv_or_dc() with simplified calculation for DIV64_U64_ROUND_UP() and dropped the cast for U32_MAX in min_t. * Replaced mul_u64_u32_div->rzg2l_gpt_mul_u64_u64_div_u64() helper. * Dropped pm pointer from struct rzg2l_gpt_driver() and simplified clk handling in probe(). v16->v17: * Added ret = dev_err_probe() to avoid return success in probe(). * Dropped unneeded MODULE_ALIAS(). * Dropped .owner from struct rzg2l_gpt_ops. * Fixed build issue reported by kernel test robot by replacing DIV_ROUND_UP()->DIV64_U64_ROUND_UP() in rzg2l_gpt_calculate_pv_or_dc(). * Added max_val to struct rzg2l_gpt_chip to compute maximum period supported by the HW in probe() and limit its value in apply() to avoid 64-bit overflow with computation. * Added helper function calculate_period_or_duty() to avoid losing precision for smaller period/duty cycle values ((2^32 * 10^9 << 2) < 2^64), by not processing the rounded values. * Replaced mul_u64_u64_div_u64()->mul_u64_u32_div() as the former is giving warnings with CONFIG_PWM_DEBUG enabled for very high values. eg: echo "###### Medium setting 11000 sec = 3hours ##" echo 11000000000000 > /sys/class/pwm/$PWMCHIP/pwm${IO_1}/period echo 5500000000000 > /sys/class/pwm/$PWMCHIP/pwm${IO_1}/duty_cycle dumpgptreg echo "###### High setting##" echo 43980465100800 > /sys/class/pwm/$PWMCHIP/pwm${IO_1}/period echo 23980465100800 > /sys/class/pwm/$PWMCHIP/pwm${IO_1}/duty_cycle dumpgptreg with mul_u64_u32_div(): ###### Medium setting 11000 sec = 3hours ## Read at address 0x10048464 (0xffffb9426464): 0x400746FE Read at address 0x1004844C (0xffff8fdfb44c): 0x2003A37F Read at address 0x1004842C (0xffff9855b42c): 0x05000001 ###### High setting## Read at address 0x10048464 (0xffff9101b464): 0xFFFFFFFF Read at address 0x1004844C (0xffffaee0544c): 0x8B95AD77 Read at address 0x1004842C (0xffffbbc8a42c): 0x05000001 with mul_u64_u64_div_u64(): ###### Medium setting 11000 sec = 3hours ## Read at address 0x10048464 (0xffffb3185464): 0x400746FE Read at address 0x1004844C (0xffff81ebb44c): 0x2003A37F Read at address 0x1004842C (0xffff904fd42c): 0x05000001 ######[ 304.213944] pwm-rzg2l-gpt 10048000.pwm: .apply is not idempotent (ena=1 pol=0 5500000000000/43980352512000) -> (ena=1 pol=0 5500000000000/43980239923200) High setting## [ 304.230854] pwm-rzg2l-gpt 10048000.pwm: .apply is not idempotent (ena=1 pol=0 23980465100800/43980352512000) -> (ena=1 pol=0 23980465100800/43980239923200) Read at address 0x10048464 (0xffffb5bb3464): 0xFFFFAA19 Read at address 0x1004844C (0xffff99b8c44c): 0x8B95AD77 Read at address 0x1004842C (0xffffbba2342c): 0x05000001 v15->v16: * Replaced the macro DIV_ROUND_UP_ULL->DIV64_U64_ROUND_UP * Added DIV_ROUND_UP in rzg2l_gpt_calculate_pv_or_dc() to avoid loss of precision. * Replaced min->min_t() in rzg2l_gpt_calculate_pv_or_dc(). * Added a comment for rzg2l_gpt_config() * Replaced mul_u64_u32_div()->mul_u64_u64_div_u64() in rzg2l_gpt_config() * Fixed the logical condition related to counter stop in rzg2l_gpt_config(). * Dropped pm_runtime_resume_*() from rzg2l_gpt_config() as it is managed by rzg2l_gpt_apply(). * Moved pm_runtime_resume_*() from rzg2l_gpt_{en,dis}able() to rzg2l_gpt_apply(). v14->v15: * Added enable_count and ch_en_bits variables to struct rzg2l_gpt_chip based on feedback for pwm_mtu3 driver. * Updated copyright header and commit description by replacing "This patch adds"-> "Add" * Replaced macro RZG2L_GET_CH_INDEX->RZG2L_GET_CH and replaced ch_index->ch throughout * rzg2l_gpt_{enable,disable}() enables/disables PWM based on the enable_count. * Replaced pm_runtime_get_sync->pm_runtime_resume_and_get and propogated the error in rzg2l_gpt_get_state() and rzg2l_gpt_config() * Reduced variable scope in rzg2l_gpt_get_state() by moving most of variables inside the if statement. * Updated rzg2l_gpt_get_state() by moving duty > period check inside the top if block. * Added helper functions rzg2l_gpt_calculate_pv_or_dc()to simplify config. Also Improved the logic in rzg2l_gpt_calculate_pv_or_dc() by using min(period_or_duty_cycle >> (2 * prescale), (u64)U32_MAX); * Updated rzg2l_gpt_get_state() by moving duty > period check inside the top if block. * Simplified rzg2l_gpt_config() for updating registers * Dropped pm_runtime_get_sync() and used bitmap variable "ch_en_bits" to make balanced PM usage count in rzg2l_gpt_reset_assert_pm_disable() For case were unbind is called before apply where pwm is enabled by bootloader. * Added error check for clk_rate_exclusive_get() and clk_get_rate() in probe(). * Dropped prescale from struct rzg2l_gpt_chip. * Replaced of_match_ptr(rzg2l_gpt_of_table)->rzg2l_gpt_of_table in struct rzg2l_gpt_driver v13->v14: * Removed parenthesis for RZG2L_MAX_HW_CHANNELS and RZG2L_CHANNELS_PER_IO * Removed duty_cycle variable from struct rzg2l_gpt_chip and added comment for cache for prescale variable. * Fixed a bug in rzg2l_gpt_cntr_need_stop(). * Reordered rzg2l_gpt_config() just above apply() * Replaced pwm_is_enabled()->pwm->state.enabled in config * Replaced pm_runtime_resume_and_get with unconditional pm_runtime_get_sync() in config(). * Restored duty_cycle > period check in rzg2l_gpt_get_state(). * Added error check for clk_prepare_enable() in probe() and propagating error to the caller for pm_runtime_resume() * clk_get_rate() is called after enabling the clock and clk_rate_exclusive_get() * Simplified rzg2l_gpt_probe() by removing bitmap variables. * Added pm_runtime_idle() to suspend the device during probe. * Moved overflow condition check from config->probe(). * Simplified rzg2l_gpt_reset_assert_pm_disable(). v12->v13: * Replaced Kconfig dependency from ARCH_RENESAS->ARCH_RZG2L * Sorted #include alphabetically * Added a comment for mutex_lock to fix check patch warning * Replaced data type of duty_cycle from unsigned int->u32 as the maximum value stored is U32_MAX. * Improved rzg2l_gpt_config() by removing unwanted duty_cycle related code. * Improved rzg2l_gpt_get_state() by setting "val = rzg2l_gpt->duty_cycle[pwm->hwpwm];", and factor "tmp = NSEC_PER_SEC * (u64)val;" out of the if-statement. * Started using DEFINE_RUNTIME_DEV_PM_OPS(), and dropped __maybe_unused from the callbacks. v11->v12: * Added return code for get_state() * Cache duty cycle/prescale as the driver cannot read the current duty cycle/prescale from the hardware if the hardware is disabled. Cache the last programmed duty cycle/prescale value to return in that case. * Updated rzg2l_gpt_enable to enable the clocks. * Updated rzg2l_gpt_disable to disable the clocks. * Updated rzg2l_gpt_config() to cache duty cucle/prescale value * Updated rzg2l_gpt_get_state to use cached value of duty cycle/prescale,If the PWM is disabled. * Simplified rzg2l_gpt_apply() * Added comments in rzg2l_gpt_reset_assert_pm_disable() v10->v11: * Used bitmap_zero for initializing bitmap varable. * Fixed clock imbalance during remove for the case bootloader turning on PWM and module unload is called just after the boot. * Fixed over flow condition in get_state() for a prescale value of 2 & more. * Improved rzg2l_gpt_cntr_need_stop() based on prescale as it is the only runtime variable. * Added array for Cache variables state_period and prescale * Probe caches the prescale value set by the bootloader. * Updated rzg2l_gpt_config() to make use of array variables. v9->v10: * Updated the error handling in probe(), clk_disable_unprepare called on the error path. * Removed ch_en array and started using bitmask instead. v8->v9: * deassert after devm_clk_get() to avoid reset stays deasserted,in case clk_get() fails. * Removed ch_offs from struct rzg2l_gpt_chip and use macro instead. * Updated error handling in probe() v7->v8: * Modelled as single PWM device handling multiple channels * Replaced shared reset->devm_reset_control_get_exclusive() * Replaced iowrite32->writel and ioread32->readl * Updated prescale calculation * Added PM runtime callbacks * Updated PM handling and removed "pwm_enabled_by_bootloader" variable * Introduced rzg2l_gpt_is_ch_enabled for checking enable status on both IO's * Moved enable/disable output pins from config->enable/disable. * Added rzg2l_gpt_cntr_need_stop() for caching prescalar/mode values. v6->v7: * Added the comment for cacheing rzg2l_gpt->state_period. * Fixed boundary values for pv and dc. * Added comment for modifying mode, prescaler, timer counter and buffer enable registers. * Fixed buffer overflow in get_state() * Removed unnecessary assignment of state->period value in get_state(). * Fixed state->duty_cycle value in get_state(). * Added a limitation for disabling the channels. v5->v6: * Updated macros RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH and RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH with computation involving FIELD_PREP macro. * Removed struct rzg2l_gpt_phase and started using RZG2L_GTCCR macro for duty_offset. * replaced misnomer real_period->state_period. * Added handling for values >= (1024 << 32) for both period and duty cycle. * Added comments for pwm {en,dis}abled by bootloader during probe. v4->v5: * Added Hardware manual details * Replaced the comment GTCNT->Counter * Removed the macros RZG2L_GPT_IO_PER_CHANNEL and chip.npwm directly used in probe. * Removed the unsed macro RZG2L_GTPR_MAX_VALUE * Added driver prefix for the type name and the variable. * Initialization of per_channel data moved from request->probe. * Updated clr parameter for rzg2l_gpt_modify for Start count. * Started using mutex and usage_count for handling shared period and prescalar for the 2 channels. * Updated the comment cycle->period. * Removed clk_disable from rzg2l_gpt_reset_assert_pm_disable() * Replaced pc->rzg2l_gpt. * Updated prescale calculation. * Moved pm_runtime_{get_sync,put} from {request,free}->{enable,disable} * Removed platform_set_drvdata as it is unused * Removed the variable pwm_enabled_by_bootloader * Added dev_err_probe in various error paths in probe. * Added an error message, if devm_pwmchip_add() fails. v3->v4: * Changed the local variable type i from u16->u8 and prescaled_period_ cycles from u64->u32 in calculate_prescale(). * Replaced mul_u64_u64_div_u64()->mul_u64_u32_div() * Dropped the comma after the sentinel. * Add a variable to track pwm enabled by bootloader and added comments in probe(). * Removed unnecessary rzg2l_gpt_reset_assert_pm_disable() from probe. * Replaced devm_clk_get()->devm_clk_get_prepared() * Removed devm_clk_get_optional_enabled() v2->v3: * Updated limitation section * Added prefix "RZG2L_" for all macros * Modified prescale calculation * Removed pwm_set_chip_data * Updated comment related to modifying Mode and Prescaler * Updated setting of prescale value in rzg2l_gpt_config() * Removed else branch from rzg2l_gpt_get_state() * removed the err label from rzg2l_gpt_apply() * Added devm_clk_get_optional_enabled() to retain clk on status, in case bootloader turns on the clk of pwm. * Replaced devm_reset_control_get_exclusive->devm_reset_control_get_shared as single reset shared between 8 channels. v1->v2: * Added Limitations section * dropped "_MASK" from the define names. * used named initializer for struct phase * Added gpt_pwm_device into a flexible array member in rzg2l_gpt_chip * Revised the logic for prescale * Added .get_state callback * Improved error handling in rzg2l_gpt_apply * Removed .remove callback * Tested driver with PWM_DEBUG enabled RFC->V1: * Updated macros * replaced rzg2l_gpt_write_mask()->rzg2l_gpt_modify() * Added rzg2l_gpt_read() --- drivers/pwm/Kconfig | 11 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-rzg2l-gpt.c | 542 ++++++++++++++++++++++++++++++++++++ 3 files changed, 554 insertions(+) create mode 100644 drivers/pwm/pwm-rzg2l-gpt.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 4b956d661755..bf658bb472f5 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -513,6 +513,17 @@ config PWM_ROCKCHIP Generic PWM framework driver for the PWM controller found on Rockchip SoCs. +config PWM_RZG2L_GPT + tristate "Renesas RZ/G2L General PWM Timer support" + depends on ARCH_RZG2L || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the General PWM Timer controller found in Renesas + RZ/G2L like chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rzg2l-gpt. + config PWM_RZ_MTU3 tristate "Renesas RZ/G2L MTU3a PWM Timer support" depends on RZ_MTU3 diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index c5ec9e168ee7..50a6520363aa 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE) += pwm-raspberrypi-poe.o obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o +obj-$(CONFIG_PWM_RZG2L_GPT) += pwm-rzg2l-gpt.o obj-$(CONFIG_PWM_RZ_MTU3) += pwm-rz-mtu3.o obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o diff --git a/drivers/pwm/pwm-rzg2l-gpt.c b/drivers/pwm/pwm-rzg2l-gpt.c new file mode 100644 index 000000000000..8c88f5d536fc --- /dev/null +++ b/drivers/pwm/pwm-rzg2l-gpt.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2L General PWM Timer (GPT) driver + * + * Copyright (C) 2024 Renesas Electronics Corporation + * + * Hardware manual for this IP can be found here + * https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en + * + * Limitations: + * - Counter must be stopped before modifying Mode and Prescaler. + * - When PWM is disabled, the output is driven to inactive. + * - While the hardware supports both polarities, the driver (for now) + * only handles normal polarity. + * - When both channels are used, disabling the channel on one stops the + * other. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RZG2L_GTCR 0x2c +#define RZG2L_GTUDDTYC 0x30 +#define RZG2L_GTIOR 0x34 +#define RZG2L_GTBER 0x40 +#define RZG2L_GTCNT 0x48 +#define RZG2L_GTCCR(i) (0x4c + 4 * (i)) +#define RZG2L_GTPR 0x64 + +#define RZG2L_GTCR_CST BIT(0) +#define RZG2L_GTCR_MD GENMASK(18, 16) +#define RZG2L_GTCR_TPCS GENMASK(26, 24) + +#define RZG2L_GTCR_MD_SAW_WAVE_PWM_MODE FIELD_PREP(RZG2L_GTCR_MD, 0) + +#define RZG2L_GTUDDTYC_UP BIT(0) +#define RZG2L_GTUDDTYC_UDF BIT(1) +#define RZG2L_GTUDDTYC_UP_COUNTING (RZG2L_GTUDDTYC_UP | RZG2L_GTUDDTYC_UDF) + +#define RZG2L_GTIOR_GTIOA GENMASK(4, 0) +#define RZG2L_GTIOR_GTIOB GENMASK(20, 16) +#define RZG2L_GTIOR_GTIOx(a) ((a) ? RZG2L_GTIOR_GTIOB : RZG2L_GTIOR_GTIOA) +#define RZG2L_GTIOR_OAE BIT(8) +#define RZG2L_GTIOR_OBE BIT(24) +#define RZG2L_GTIOR_OxE(a) ((a) ? RZG2L_GTIOR_OBE : RZG2L_GTIOR_OAE) + +#define RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE 0x1b +#define RZG2L_GTIOR_GTIOA_OUT_HI_END_TOGGLE_CMP_MATCH \ + (RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE | RZG2L_GTIOR_OAE) +#define RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH \ + (FIELD_PREP(RZG2L_GTIOR_GTIOB, RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE) | RZG2L_GTIOR_OBE) + +#define RZG2L_GTIOR_GTIOx_OUT_HI_END_TOGGLE_CMP_MATCH(a) \ + ((a) ? RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH : \ + RZG2L_GTIOR_GTIOA_OUT_HI_END_TOGGLE_CMP_MATCH) + +#define RZG2L_MAX_HW_CHANNELS 8 +#define RZG2L_CHANNELS_PER_IO 2 +#define RZG2L_MAX_PWM_CHANNELS (RZG2L_MAX_HW_CHANNELS * RZG2L_CHANNELS_PER_IO) +#define RZG2L_MAX_SCALE_FACTOR 1024 + +#define RZG2L_GET_CH(a) ((a) / 2) + +#define RZG2L_GET_CH_OFFS(i) (0x100 * (i)) + +struct rzg2l_gpt_chip { + void __iomem *mmio; + struct reset_control *rstc; + struct mutex lock; /* lock to protect shared channel resources */ + unsigned long rate_khz; + u64 max_val; + u32 period_cycles[RZG2L_MAX_HW_CHANNELS]; + u32 user_count[RZG2L_MAX_HW_CHANNELS]; + u32 enable_count[RZG2L_MAX_HW_CHANNELS]; + DECLARE_BITMAP(ch_en_bits, RZG2L_MAX_PWM_CHANNELS); +}; + +static inline struct rzg2l_gpt_chip *to_rzg2l_gpt_chip(struct pwm_chip *chip) +{ + return pwmchip_get_drvdata(chip); +} + +static inline unsigned int rzg2l_gpt_subchannel(unsigned int hwpwm) +{ + return hwpwm & 0x1; +} + +static void rzg2l_gpt_write(struct rzg2l_gpt_chip *rzg2l_gpt, u32 reg, u32 data) +{ + writel(data, rzg2l_gpt->mmio + reg); +} + +static u32 rzg2l_gpt_read(struct rzg2l_gpt_chip *rzg2l_gpt, u32 reg) +{ + return readl(rzg2l_gpt->mmio + reg); +} + +static void rzg2l_gpt_modify(struct rzg2l_gpt_chip *rzg2l_gpt, u32 reg, u32 clr, + u32 set) +{ + rzg2l_gpt_write(rzg2l_gpt, reg, + (rzg2l_gpt_read(rzg2l_gpt, reg) & ~clr) | set); +} + +static u8 rzg2l_gpt_calculate_prescale(struct rzg2l_gpt_chip *rzg2l_gpt, + u64 period_cycles) +{ + u32 prescaled_period_cycles; + u8 prescale; + + prescaled_period_cycles = period_cycles >> 32; + if (prescaled_period_cycles >= 256) + prescale = 5; + else + prescale = (fls(prescaled_period_cycles) + 1) / 2; + + return prescale; +} + +static int rzg2l_gpt_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + u32 ch = RZG2L_GET_CH(pwm->hwpwm); + + mutex_lock(&rzg2l_gpt->lock); + rzg2l_gpt->user_count[ch]++; + mutex_unlock(&rzg2l_gpt->lock); + + return 0; +} + +static void rzg2l_gpt_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + u32 ch = RZG2L_GET_CH(pwm->hwpwm); + + mutex_lock(&rzg2l_gpt->lock); + rzg2l_gpt->user_count[ch]--; + mutex_unlock(&rzg2l_gpt->lock); +} + +static bool rzg2l_gpt_is_ch_enabled(struct rzg2l_gpt_chip *rzg2l_gpt, u8 hwpwm) +{ + u8 ch = RZG2L_GET_CH(hwpwm); + u32 offs = RZG2L_GET_CH_OFFS(ch); + u32 val; + + val = rzg2l_gpt_read(rzg2l_gpt, offs + RZG2L_GTCR); + if (!(val & RZG2L_GTCR_CST)) + return false; + + val = rzg2l_gpt_read(rzg2l_gpt, offs + RZG2L_GTIOR); + + return val & RZG2L_GTIOR_OxE(rzg2l_gpt_subchannel(hwpwm)); +} + +static int rzg2l_gpt_enable(struct rzg2l_gpt_chip *rzg2l_gpt, + struct pwm_device *pwm) +{ + u8 sub_ch = rzg2l_gpt_subchannel(pwm->hwpwm); + u32 val = RZG2L_GTIOR_GTIOx(sub_ch) | RZG2L_GTIOR_OxE(sub_ch); + u8 ch = RZG2L_GET_CH(pwm->hwpwm); + u32 offs = RZG2L_GET_CH_OFFS(ch); + + /* Enable pin output */ + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTIOR, val, + RZG2L_GTIOR_GTIOx_OUT_HI_END_TOGGLE_CMP_MATCH(sub_ch)); + + mutex_lock(&rzg2l_gpt->lock); + if (!rzg2l_gpt->enable_count[ch]) + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, 0, RZG2L_GTCR_CST); + + rzg2l_gpt->enable_count[ch]++; + mutex_unlock(&rzg2l_gpt->lock); + + return 0; +} + +static void rzg2l_gpt_disable(struct rzg2l_gpt_chip *rzg2l_gpt, + struct pwm_device *pwm) +{ + u8 sub_ch = rzg2l_gpt_subchannel(pwm->hwpwm); + u8 ch = RZG2L_GET_CH(pwm->hwpwm); + u32 offs = RZG2L_GET_CH_OFFS(ch); + + /* Disable pin output */ + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTIOR, RZG2L_GTIOR_OxE(sub_ch), 0); + + /* Stop count, Output low on GTIOCx pin when counting stops */ + mutex_lock(&rzg2l_gpt->lock); + /* Don't decrement, if ch_en_bits is set by the probe */ + if (!test_bit(pwm->hwpwm, rzg2l_gpt->ch_en_bits)) + rzg2l_gpt->enable_count[ch]--; + + if (!rzg2l_gpt->enable_count[ch]) + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, RZG2L_GTCR_CST, 0); + + mutex_unlock(&rzg2l_gpt->lock); + + /* + * Probe() set these bits, if pwm is enabled by bootloader. In such + * case, clearing the bits will avoid errors during unbind. + */ + if (test_bit(pwm->hwpwm, rzg2l_gpt->ch_en_bits)) + clear_bit(pwm->hwpwm, rzg2l_gpt->ch_en_bits); +} + +static u64 calculate_period_or_duty(struct rzg2l_gpt_chip *rzg2l_gpt, u32 val, u8 prescale) +{ + u64 tmp; + + tmp = (u64)val << (2 * prescale); + tmp *= USEC_PER_SEC; + + return DIV64_U64_ROUND_UP(tmp, rzg2l_gpt->rate_khz); +} + +static int rzg2l_gpt_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + int rc; + + rc = pm_runtime_resume_and_get(chip->dev); + if (rc) + return rc; + + state->enabled = rzg2l_gpt_is_ch_enabled(rzg2l_gpt, pwm->hwpwm); + if (state->enabled) { + u32 ch = RZG2L_GET_CH(pwm->hwpwm); + u32 offs = RZG2L_GET_CH_OFFS(ch); + u8 prescale; + u32 val; + + val = rzg2l_gpt_read(rzg2l_gpt, offs + RZG2L_GTCR); + prescale = FIELD_GET(RZG2L_GTCR_TPCS, val); + + val = rzg2l_gpt_read(rzg2l_gpt, offs + RZG2L_GTPR); + state->period = calculate_period_or_duty(rzg2l_gpt, val, prescale); + + val = rzg2l_gpt_read(rzg2l_gpt, + offs + RZG2L_GTCCR(rzg2l_gpt_subchannel(pwm->hwpwm))); + state->duty_cycle = calculate_period_or_duty(rzg2l_gpt, val, prescale); + if (state->duty_cycle > state->period) + state->duty_cycle = state->period; + } + + state->polarity = PWM_POLARITY_NORMAL; + pm_runtime_put(chip->dev); + + return 0; +} + +static u32 rzg2l_gpt_calculate_pv_or_dc(u64 period_or_duty_cycle, u8 prescale) +{ + return min_t(u64, (period_or_duty_cycle + (1 << (2 * prescale)) - 1) >> (2 * prescale), + U32_MAX); +} + +/* Caller holds the lock while calling rzg2l_gpt_config() */ +static int rzg2l_gpt_config(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + u64 period, duty_cycle, period_cycles, duty_cycles; + u8 ch = RZG2L_GET_CH(pwm->hwpwm); + u32 offs = RZG2L_GET_CH_OFFS(ch); + unsigned long pv, dc; + u8 prescale; + + /* Limit period/duty cycle to max value supported by the HW */ + period = min(state->period, rzg2l_gpt->max_val); + period_cycles = mul_u64_u64_div_u64(period, rzg2l_gpt->rate_khz, USEC_PER_SEC); + + /* + * GPT counter is shared by multiple channels, so prescale and period + * can NOT be modified when there are multiple channels in use with + * different settings. + */ + if (rzg2l_gpt->user_count[ch] > 1 && period_cycles < rzg2l_gpt->period_cycles[ch]) + return -EBUSY; + + prescale = rzg2l_gpt_calculate_prescale(rzg2l_gpt, period_cycles); + pv = rzg2l_gpt_calculate_pv_or_dc(period_cycles, prescale); + + duty_cycle = min(state->duty_cycle, rzg2l_gpt->max_val); + duty_cycles = mul_u64_u64_div_u64(duty_cycle, rzg2l_gpt->rate_khz, USEC_PER_SEC); + dc = rzg2l_gpt_calculate_pv_or_dc(duty_cycles, prescale); + + /* + * GPT counter is shared by multiple channels, we cache the period cycles + * from the first enabled channel and use the same value for both + * channels. + */ + rzg2l_gpt->period_cycles[ch] = period_cycles; + + /* + * Counter must be stopped before modifying mode, prescaler, timer + * counter and buffer enable registers. These registers are shared + * between both channels. So allow updating these registers only for the + * first enabled channel. + */ + if (rzg2l_gpt->enable_count[ch] <= 1) { + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, RZG2L_GTCR_CST, 0); + + /* GPT set operating mode (saw-wave up-counting) */ + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, RZG2L_GTCR_MD, + RZG2L_GTCR_MD_SAW_WAVE_PWM_MODE); + + /* Set count direction */ + rzg2l_gpt_write(rzg2l_gpt, offs + RZG2L_GTUDDTYC, RZG2L_GTUDDTYC); + + /* Select count clock */ + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, RZG2L_GTCR_TPCS, + FIELD_PREP(RZG2L_GTCR_TPCS, prescale)); + + /* Set period */ + rzg2l_gpt_write(rzg2l_gpt, offs + RZG2L_GTPR, pv); + } + + /* Set duty cycle */ + rzg2l_gpt_write(rzg2l_gpt, offs + RZG2L_GTCCR(rzg2l_gpt_subchannel(pwm->hwpwm)), + dc); + + if (rzg2l_gpt->enable_count[ch] <= 1) { + /* Set initial value for counter */ + rzg2l_gpt_write(rzg2l_gpt, offs + RZG2L_GTCNT, 0); + + /* Set no buffer operation */ + rzg2l_gpt_write(rzg2l_gpt, offs + RZG2L_GTBER, 0); + + /* Restart the counter after updating the registers */ + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTCR, + RZG2L_GTCR_CST, RZG2L_GTCR_CST); + } + + return 0; +} + +static int rzg2l_gpt_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + bool enabled = pwm->state.enabled; + int ret; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + if (!state->enabled) { + if (enabled) { + rzg2l_gpt_disable(rzg2l_gpt, pwm); + pm_runtime_put_sync(pwmchip_parent(chip)); + } + + return 0; + } + + if (!enabled) { + ret = pm_runtime_resume_and_get(pwmchip_parent(chip)); + if (ret) + return ret; + } + + mutex_lock(&rzg2l_gpt->lock); + ret = rzg2l_gpt_config(chip, pwm, state); + mutex_unlock(&rzg2l_gpt->lock); + if (ret) + goto err_pm_runtime_put; + + if (!enabled) { + ret = rzg2l_gpt_enable(rzg2l_gpt, pwm); + if (ret) + goto err_pm_runtime_put; + } + + return 0; + +err_pm_runtime_put: + pm_runtime_put_sync(pwmchip_parent(chip)); + return ret; +} + +static const struct pwm_ops rzg2l_gpt_ops = { + .request = rzg2l_gpt_request, + .free = rzg2l_gpt_free, + .get_state = rzg2l_gpt_get_state, + .apply = rzg2l_gpt_apply, +}; + +static void rzg2l_gpt_reset_assert_pm_disable(void *data) +{ + struct pwm_chip *chip = data; + struct rzg2l_gpt_chip *rzg2l_gpt = to_rzg2l_gpt_chip(chip); + u32 i; + + /* + * The below check is for making balanced PM usage count + * eg: boot loader is turning on PWM and probe increments the PM usage + * count. Before apply, if there is unbind/remove callback we need to + * decrement the PM usage count. + */ + for (i = 0; i < RZG2L_MAX_PWM_CHANNELS; i++) { + if (test_bit(i, rzg2l_gpt->ch_en_bits)) + pm_runtime_put(pwmchip_parent(chip)); + } + + pm_runtime_disable(pwmchip_parent(chip)); + reset_control_assert(rzg2l_gpt->rstc); +} + +static int rzg2l_gpt_probe(struct platform_device *pdev) +{ + struct rzg2l_gpt_chip *rzg2l_gpt; + struct device *dev = &pdev->dev; + struct pwm_chip *chip; + unsigned long rate; + struct clk *clk; + int ret; + u32 i; + + chip = devm_pwmchip_alloc(dev, RZG2L_MAX_PWM_CHANNELS, sizeof(*rzg2l_gpt)); + if (IS_ERR(chip)) + return PTR_ERR(chip); + rzg2l_gpt = to_rzg2l_gpt_chip(chip); + + rzg2l_gpt->mmio = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rzg2l_gpt->mmio)) + return PTR_ERR(rzg2l_gpt->mmio); + + rzg2l_gpt->rstc = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(rzg2l_gpt->rstc)) + return dev_err_probe(dev, PTR_ERR(rzg2l_gpt->rstc), + "get reset failed\n"); + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "cannot get clock\n"); + + ret = reset_control_deassert(rzg2l_gpt->rstc); + if (ret) + return dev_err_probe(dev, ret, "cannot deassert reset control\n"); + + pm_runtime_enable(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret) + goto err_reset; + + ret = devm_clk_rate_exclusive_get(dev, clk); + if (ret) + goto err_pm_put; + + rate = clk_get_rate(clk); + if (!rate) { + ret = dev_err_probe(dev, -EINVAL, "gpt clk rate is 0"); + goto err_pm_put; + } + + /* + * Refuse clk rates > 1 GHz to prevent overflow later for computing + * period and duty cycle. + */ + if (rate > NSEC_PER_SEC) { + ret = dev_err_probe(dev, -EINVAL, "gpt clk rate is > 1GHz"); + goto err_pm_put; + } + + /* + * Rate is in MHz and is always integer for peripheral clk + * 2^32 * 2^10 (prescalar) * 10^6 (rate_khz) < 2^64 + * So make sure rate is multiple of 1000. + */ + rzg2l_gpt->rate_khz = rate / KILO; + if (rzg2l_gpt->rate_khz * KILO != rate) { + ret = dev_err_probe(dev, -EINVAL, "rate is not multiple of 1000"); + goto err_pm_put; + } + + rzg2l_gpt->max_val = div64_u64((u64)U32_MAX * USEC_PER_SEC, + rzg2l_gpt->rate_khz) * RZG2L_MAX_SCALE_FACTOR; + + /* + * We need to keep the clock on, in case the bootloader has enabled the + * PWM and is running during probe(). + */ + for (i = 0; i < RZG2L_MAX_PWM_CHANNELS; i++) { + if (rzg2l_gpt_is_ch_enabled(rzg2l_gpt, i)) { + set_bit(i, rzg2l_gpt->ch_en_bits); + pm_runtime_get_sync(dev); + } + } + + pm_runtime_put(dev); + + mutex_init(&rzg2l_gpt->lock); + ret = devm_add_action_or_reset(dev, rzg2l_gpt_reset_assert_pm_disable, chip); + if (ret < 0) + return ret; + + chip->ops = &rzg2l_gpt_ops; + ret = devm_pwmchip_add(dev, chip); + if (ret) + return dev_err_probe(dev, ret, "failed to add PWM chip\n"); + + return 0; + +err_pm_put: + pm_runtime_put(dev); +err_reset: + pm_runtime_disable(dev); + reset_control_assert(rzg2l_gpt->rstc); + return ret; +} + +static const struct of_device_id rzg2l_gpt_of_table[] = { + { .compatible = "renesas,rzg2l-gpt", }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rzg2l_gpt_of_table); + +static struct platform_driver rzg2l_gpt_driver = { + .driver = { + .name = "pwm-rzg2l-gpt", + .of_match_table = rzg2l_gpt_of_table, + }, + .probe = rzg2l_gpt_probe, +}; +module_platform_driver(rzg2l_gpt_driver); + +MODULE_AUTHOR("Biju Das "); +MODULE_DESCRIPTION("Renesas RZ/G2L General PWM Timer (GPT) Driver"); +MODULE_LICENSE("GPL"); From patchwork Fri Mar 15 14:35:58 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 13593544 X-Patchwork-Delegate: geert@linux-m68k.org Received: from relmlie6.idc.renesas.com (relmlor2.renesas.com [210.160.252.172]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 540051E51A; Fri, 15 Mar 2024 14:36:29 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=210.160.252.172 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513392; cv=none; b=dIVwY05qPbiB656ceg5cS2W/RLCbj+vbMZIjbhFnOaEOsLIxYneCFgOYs9dvhAMOv3n77QcHUTW8QnlnwTXoNFn4p2VSnneeVJBVxoy5lehlJMAa47z6dU7Yt6Cvo7JtIwU5VGWBDEq+Y9Iag37834zF/2NwytC+fIn/2lvXhK8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710513392; c=relaxed/simple; bh=0d4uEUkVewJIRmr+A71TMkBGc07zJUapbM/PJ1tqLiM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=b6t8VPpZWv7zZRcH2E3M3cfngyukdfd46Z360m8DRXiFAKwGpMBbo1P0FpKA1PwjxNRFIpcAAS228wB3B+qGSl7WM1y1ua6AjMoncCh3yM7iguV6o0Aesltu6xmj3nlEK7xNARvQYAq9OQDKEvxLYuYhv5B8nKIwVA88aaQ3Xz8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com; spf=pass smtp.mailfrom=bp.renesas.com; arc=none smtp.client-ip=210.160.252.172 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=bp.renesas.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bp.renesas.com X-IronPort-AV: E=Sophos;i="6.07,128,1708354800"; d="scan'208";a="201844805" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie6.idc.renesas.com with ESMTP; 15 Mar 2024 23:36:22 +0900 Received: from localhost.localdomain (unknown [10.226.93.102]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 2488E435BA56; Fri, 15 Mar 2024 23:36:18 +0900 (JST) From: Biju Das To: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= Cc: Biju Das , Geert Uytterhoeven , Fabrizio Castro , Magnus Damm , linux-pwm@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Prabhakar Mahadev Lad , Biju Das Subject: [PATCH v19 4/4] pwm: rzg2l-gpt: Add support for gpt linking with poeg Date: Fri, 15 Mar 2024 14:35:58 +0000 Message-Id: <20240315143558.221340-5-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> References: <20240315143558.221340-1-biju.das.jz@bp.renesas.com> Precedence: bulk X-Mailing-List: linux-renesas-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The General PWM Timer (GPT) is capable of detecting "dead time error and short-circuits between output pins" and send Output disable request to poeg(Port Output Enable for GPT). Add support for linking poeg group with gpt, so that gpt can control the output disable function. Signed-off-by: Biju Das --- v18->v19: * No change v17->v18: * Moved bitpos near to the user. v16->v17: * No change v15->v16: * No change. v14->v15: * Updated commit description by replacing "This patch add"-> "Add". v3->v14: * Removed the parenthesis for RZG2L_MAX_POEG_GROUPS. * Renamed rzg2l_gpt_parse_properties()->rzg2l_gpt_poeg_init() as it not only parse the properties but also implements the needed register writes. * Added acomment here about the purpose of the function rzg2l_gpt_poeg_init() * Removed magic numbers from rzg2l_gpt_poeg_init() * Fixed resource leak in rzg2l_gpt_poeg_init(). * Moved the patch from series[1] to here [1] https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-biju.das.jz@bp.renesas.com/T/#t v2->v3: * Updated commit header and description * Added check for poeg group in rzg2l_gpt_parse_properties(). v1->v2: * Replaced id->poeg-id as per poeg bindings. This patch depend upon [1] [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221214132232.2835828-3-biju.das.jz@bp.renesas.com/ --- drivers/pwm/pwm-rzg2l-gpt.c | 82 +++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/drivers/pwm/pwm-rzg2l-gpt.c b/drivers/pwm/pwm-rzg2l-gpt.c index 8c88f5d536fc..3ac9cbbd6f74 100644 --- a/drivers/pwm/pwm-rzg2l-gpt.c +++ b/drivers/pwm/pwm-rzg2l-gpt.c @@ -32,6 +32,7 @@ #define RZG2L_GTCR 0x2c #define RZG2L_GTUDDTYC 0x30 #define RZG2L_GTIOR 0x34 +#define RZG2L_GTINTAD 0x38 #define RZG2L_GTBER 0x40 #define RZG2L_GTCNT 0x48 #define RZG2L_GTCCR(i) (0x4c + 4 * (i)) @@ -48,11 +49,17 @@ #define RZG2L_GTUDDTYC_UP_COUNTING (RZG2L_GTUDDTYC_UP | RZG2L_GTUDDTYC_UDF) #define RZG2L_GTIOR_GTIOA GENMASK(4, 0) +#define RZG2L_GTIOR_OADF GENMASK(10, 9) #define RZG2L_GTIOR_GTIOB GENMASK(20, 16) #define RZG2L_GTIOR_GTIOx(a) ((a) ? RZG2L_GTIOR_GTIOB : RZG2L_GTIOR_GTIOA) +#define RZG2L_GTIOR_OBDF GENMASK(26, 25) #define RZG2L_GTIOR_OAE BIT(8) #define RZG2L_GTIOR_OBE BIT(24) #define RZG2L_GTIOR_OxE(a) ((a) ? RZG2L_GTIOR_OBE : RZG2L_GTIOR_OAE) +#define RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE BIT(9) +#define RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE BIT(25) +#define RZG2L_GTIOR_PIN_DISABLE_SETTING \ + (RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE | RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE) #define RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE 0x1b #define RZG2L_GTIOR_GTIOA_OUT_HI_END_TOGGLE_CMP_MATCH \ @@ -64,6 +71,8 @@ ((a) ? RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH : \ RZG2L_GTIOR_GTIOA_OUT_HI_END_TOGGLE_CMP_MATCH) +#define RZG2L_GTINTAD_GRP_MASK GENMASK(25, 24) + #define RZG2L_MAX_HW_CHANNELS 8 #define RZG2L_CHANNELS_PER_IO 2 #define RZG2L_MAX_PWM_CHANNELS (RZG2L_MAX_HW_CHANNELS * RZG2L_CHANNELS_PER_IO) @@ -73,6 +82,9 @@ #define RZG2L_GET_CH_OFFS(i) (0x100 * (i)) +#define RZG2L_MAX_POEG_GROUPS 4 +#define RZG2L_LAST_POEG_GROUP 3 + struct rzg2l_gpt_chip { void __iomem *mmio; struct reset_control *rstc; @@ -83,6 +95,7 @@ struct rzg2l_gpt_chip { u32 user_count[RZG2L_MAX_HW_CHANNELS]; u32 enable_count[RZG2L_MAX_HW_CHANNELS]; DECLARE_BITMAP(ch_en_bits, RZG2L_MAX_PWM_CHANNELS); + DECLARE_BITMAP(poeg_gpt_link, RZG2L_MAX_POEG_GROUPS * RZG2L_MAX_HW_CHANNELS); }; static inline struct rzg2l_gpt_chip *to_rzg2l_gpt_chip(struct pwm_chip *chip) @@ -419,6 +432,74 @@ static void rzg2l_gpt_reset_assert_pm_disable(void *data) reset_control_assert(rzg2l_gpt->rstc); } +/* + * This function links a poeg group{A,B,C,D} with a gpt channel{0..7} and + * configure the pin for output disable. + */ +static void rzg2l_gpt_poeg_init(struct platform_device *pdev, + struct rzg2l_gpt_chip *rzg2l_gpt) +{ + struct of_phandle_args of_args; + unsigned int i; + u32 poeg_grp; + u32 bitpos; + int cells; + u32 offs; + int ret; + + cells = of_property_count_u32_elems(pdev->dev.of_node, "renesas,poegs"); + if (cells == -EINVAL) + return; + + cells >>= 1; + for (i = 0; i < cells; i++) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "renesas,poegs", 1, i, + &of_args); + if (ret) { + dev_err(&pdev->dev, + "Failed to parse 'renesas,poegs' property\n"); + return; + } + + if (of_args.args[0] >= RZG2L_MAX_HW_CHANNELS) { + dev_err(&pdev->dev, "Invalid channel %d >= %d\n", + of_args.args[0], RZG2L_MAX_HW_CHANNELS); + of_node_put(of_args.np); + return; + } + + if (!of_device_is_available(of_args.np)) { + /* It's fine to have a phandle to a non-enabled poeg. */ + of_node_put(of_args.np); + continue; + } + + if (!of_property_read_u32(of_args.np, "renesas,poeg-id", &poeg_grp)) { + offs = RZG2L_GET_CH_OFFS(of_args.args[0]); + if (poeg_grp > RZG2L_LAST_POEG_GROUP) { + dev_err(&pdev->dev, "Invalid poeg group %d > %d\n", + poeg_grp, RZG2L_LAST_POEG_GROUP); + of_node_put(of_args.np); + return; + } + + bitpos = of_args.args[0] + poeg_grp * RZG2L_MAX_HW_CHANNELS; + set_bit(bitpos, rzg2l_gpt->poeg_gpt_link); + + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTINTAD, + RZG2L_GTINTAD_GRP_MASK, + poeg_grp << 24); + + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTIOR, + RZG2L_GTIOR_OBDF | RZG2L_GTIOR_OADF, + RZG2L_GTIOR_PIN_DISABLE_SETTING); + } + + of_node_put(of_args.np); + } +} + static int rzg2l_gpt_probe(struct platform_device *pdev) { struct rzg2l_gpt_chip *rzg2l_gpt; @@ -500,6 +581,7 @@ static int rzg2l_gpt_probe(struct platform_device *pdev) } } + rzg2l_gpt_poeg_init(pdev, rzg2l_gpt); pm_runtime_put(dev); mutex_init(&rzg2l_gpt->lock);