From patchwork Wed May 29 06:02:44 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Richard Zhu X-Patchwork-Id: 13677908 Received: from inva021.nxp.com (inva021.nxp.com [92.121.34.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 307D715F3F3 for ; Wed, 29 May 2024 06:18:44 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=92.121.34.21 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716963526; cv=none; b=Qu5r3l8cmBz5AHgeVUPmLDuZmfgmSZTyKSjhQ0Bxnj5OPpdJabopqBbR4ffsPaIpYZXTHYn2MUd7nKDItGgXoWI3eZczKjMLNIBDoqTfUeJt9NjIO+zY9h63x6USQP+6Qx1OgNTut3uxQG8Bd0iSC6bUWCvpSDSiurlvMaB/hCw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716963526; c=relaxed/simple; bh=Oawm5VsMDX5Q/shtm5IIpqGKOBJ57pu5FT1YaKQD7fM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References; b=GEEANfTPp60TriuoxMRfp/2odN6c/uGsuImmg2ZC44SQwFUzcFqMaK4JpIk0VviV5Te2ZBK1rzpsiNL2kMA1fDP3GpihfG5PmTPdiMra3q2OWPvFd/Nl5MRTKYPd1VgW3Qr8PFj0S86F3/WMYNJ3+aAlm8NHyTCDRDH7/HxPPWY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; arc=none smtp.client-ip=92.121.34.21 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id AA2F820151F; Wed, 29 May 2024 08:18:36 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 22DFC201529; Wed, 29 May 2024 08:18:36 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id 2974B181D0E3; Wed, 29 May 2024 14:18:34 +0800 (+08) From: Richard Zhu To: conor@kernel.org, vkoul@kernel.org, kishon@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, frank.li@nxp.com, conor+dt@kernel.org Cc: hongxing.zhu@nxp.com, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, imx@lists.linux.dev Subject: [PATCH v7 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding Date: Wed, 29 May 2024 14:02:44 +0800 Message-Id: <1716962565-2084-2-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1716962565-2084-1-git-send-email-hongxing.zhu@nxp.com> References: <1716962565-2084-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk X-Mailing-List: imx@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding. Introduce one HSIO configuration 'fsl,hsio-cfg', which need be set at initialization according to board design. Signed-off-by: Richard Zhu Reviewed-by: Conor Dooley --- .../bindings/phy/fsl,imx8qm-hsio.yaml | 164 ++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml new file mode 100644 index 000000000000..147bbfd2cd5f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY + +maintainers: + - Richard Zhu + +properties: + compatible: + enum: + - fsl,imx8qm-hsio + - fsl,imx8qxp-hsio + reg: + items: + - description: Base address and length of the PHY block + - description: HSIO control and status registers(CSR) of the PHY + - description: HSIO CSR of the controller bound to the PHY + - description: HSIO CSR for MISC + + reg-names: + items: + - const: reg + - const: phy + - const: ctrl + - const: misc + + "#phy-cells": + const: 3 + description: + The first defines lane index. + The second defines the type of the PHY refer to the include phy.h. + The third defines the controller index, indicated which controller + is bound to the lane. + + clocks: + minItems: 5 + maxItems: 14 + + clock-names: + minItems: 5 + maxItems: 14 + + fsl,hsio-cfg: + description: | + Specifies the use case of the HSIO module in the hardware design. + Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be + confiured as following three use cases. + +---------------------------------------+ + | | i.MX8QM | + |------------------|--------------------| + | | Lane0| Lane1| Lane2| + |------------------|------|------|------| + | pciea-x2-sata | PCIEA| PCIEA| SATA | + |------------------|------|------|------| + | pciea-x2-pcieb | PCIEA| PCIEA| PCIEB| + |------------------|------|------|------| + | pciea-pcieb-sata | PCIEA| PCIEB| SATA | + +---------------------------------------+ + $ref: /schemas/types.yaml#/definitions/string + enum: [ pciea-x2-sata, pciea-x2-pcieb, pciea-pcieb-sata] + default: pciea-pcieb-sata + + fsl,refclk-pad-mode: + description: + Specifies the mode of the refclk pad used. INPUT(PHY refclock is + provided externally via the refclk pad) or OUTPUT(PHY refclock is + derived from SoC internal source and provided on the refclk pad). + This property not exists means unused(PHY refclock is derived from + SoC internal source). + $ref: /schemas/types.yaml#/definitions/string + enum: [ input, output, unused ] + default: unused + + power-domains: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - reg-names + - "#phy-cells" + - clocks + - clock-names + - fsl,hsio-cfg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: apb_pclk0 + - const: phy0_crr + - const: ctl0_crr + - const: misc_crr + power-domains: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: pclk1 + - const: apb_pclk0 + - const: apb_pclk1 + - const: pclk2 + - const: epcs_tx + - const: epcs_rx + - const: apb_pclk2 + - const: phy0_crr + - const: phy1_crr + - const: ctl0_crr + - const: ctl1_crr + - const: ctl2_crr + - const: misc_crr + power-domains: + minItems: 2 + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + phy@5f1a0000 { + compatible = "fsl,imx8qxp-hsio"; + reg = <0x5f1a0000 0x10000>, + <0x5f120000 0x10000>, + <0x5f140000 0x10000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_4>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + #phy-cells = <3>; + fsl,hsio-cfg = "pciea-pcieb-sata"; + fsl,refclk-pad-mode = "input"; + }; +... From patchwork Wed May 29 06:02:45 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Richard Zhu X-Patchwork-Id: 13677909 Received: from inva021.nxp.com (inva021.nxp.com [92.121.34.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 31C1415B124 for ; Wed, 29 May 2024 06:18:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=92.121.34.21 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716963527; cv=none; b=CTYo/p4d4ADR9tNewSzavh9sEvP93jyUclrtsffdgE2pPIg8yVME8bIVs1u0amVIVaqqn/cE3fxGUCll7z6lw5i+t/03ThtfQTTmv1jv/LHEJ06xtRnDHLu1H8wnftJ5sbc8wSZ59dhAy1B+XbzKmUL4veoYWv74C6wfCXP9JDw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716963527; c=relaxed/simple; bh=md3h4hG+qxeS2K+eBZ+Aizj11Eme2ThLDHvUpXWehg8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References; b=Hu2etduxPWYOpqmyAAA/dFzFDV0cs281euhtacqf3Q8LudbGndDUro8YJjCsCDhzDMrWE7MSbhcgyYjE2zA+DNyBHQTCx58cIeRARHRkd7wGGS5RR+TY7hMbLpYriueetTvy9yY57z1x9Li/PRqkrw2CDc7maZ8X1gO+KmkmAkI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; arc=none smtp.client-ip=92.121.34.21 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id F1EE6201531; Wed, 29 May 2024 08:18:37 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 68FF020063B; Wed, 29 May 2024 08:18:37 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id 6B63D1820F76; Wed, 29 May 2024 14:18:35 +0800 (+08) From: Richard Zhu To: conor@kernel.org, vkoul@kernel.org, kishon@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, frank.li@nxp.com, conor+dt@kernel.org Cc: hongxing.zhu@nxp.com, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, imx@lists.linux.dev Subject: [PATCH v7 2/2] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support Date: Wed, 29 May 2024 14:02:45 +0800 Message-Id: <1716962565-2084-3-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1716962565-2084-1-git-send-email-hongxing.zhu@nxp.com> References: <1716962565-2084-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk X-Mailing-List: imx@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: Add i.MX8QM HSIO PHY driver support. i.MX8QM HSIO has three lane PHY instances, and can be bound to the following controllers in the different use cases listed in below table. - two lanes capable PCIEA controller. - one lane PCIEB controller. - AHCI SATA controller. i.MX8QM HSIO PHYs support the following use cases. +----------------------------------------------------+ | | Lane0| Lane1| Lane2| |-------------------------------|------|------|------| | use case 1: PCIEAX2SATA | PCIEA| PCIEA| SATA | |-------------------------------|------|------|------| | use case 2: PCIEAX2PCIEB | PCIEA| PCIEA| PCIEB| |-------------------------------|------|------|------| | use case 3: PCIEAPCIEBSATA | PCIEA| PCIEB| SATA | +----------------------------------------------------+ Signed-off-by: Richard Zhu Reviewed-by: Frank Li --- drivers/phy/freescale/Kconfig | 9 +- drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8qm-hsio.c | 610 ++++++++++++++++++++ 3 files changed, 619 insertions(+), 1 deletion(-) create mode 100644 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig index 45aaaea14fb4..dcd9acff6d01 100644 --- a/drivers/phy/freescale/Kconfig +++ b/drivers/phy/freescale/Kconfig @@ -35,12 +35,19 @@ config PHY_FSL_IMX8M_PCIE Enable this to add support for the PCIE PHY as found on i.MX8M family of SOCs. +config PHY_FSL_IMX8QM_HSIO + tristate "Freescale i.MX8QM HSIO PHY" + depends on OF && HAS_IOMEM + select GENERIC_PHY + help + Enable this to add support for the HSIO PHY as found on + i.MX8QM family of SOCs. + config PHY_FSL_SAMSUNG_HDMI_PHY tristate "Samsung HDMI PHY support" depends on OF && HAS_IOMEM && COMMON_CLK help Enable this to add support for the Samsung HDMI PHY in i.MX8MP. - endif config PHY_FSL_LYNX_28G diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile index c4386bfdb853..658eac7d0a62 100644 --- a/drivers/phy/freescale/Makefile +++ b/drivers/phy/freescale/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o +obj-$(CONFIG_PHY_FSL_IMX8QM_HSIO) += phy-fsl-imx8qm-hsio.o obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c new file mode 100644 index 000000000000..dcf9c45ff5d6 --- /dev/null +++ b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c @@ -0,0 +1,610 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MAX_NUM_LANE 3 +#define LANE_NUM_CLKS 5 + +/* Parameters for the waiting for PCIe PHY PLL to lock */ +#define PHY_INIT_WAIT_USLEEP_MAX 10 +#define PHY_INIT_WAIT_TIMEOUT (1000 * PHY_INIT_WAIT_USLEEP_MAX) + +/* i.MX8Q HSIO registers */ +#define HSIO_CTRL0 0x0 +#define HSIO_APB_RSTN_0 BIT(0) +#define HSIO_APB_RSTN_1 BIT(1) +#define HSIO_PIPE_RSTN_0_MASK GENMASK(25, 24) +#define HSIO_PIPE_RSTN_1_MASK GENMASK(27, 26) +#define HSIO_MODE_MASK GENMASK(20, 17) +#define HSIO_MODE_PCIE 0x0 +#define HSIO_MODE_SATA 0x4 +#define HSIO_DEVICE_TYPE_MASK GENMASK(27, 24) +#define HSIO_EPCS_TXDEEMP BIT(5) +#define HSIO_EPCS_TXDEEMP_SEL BIT(6) +#define HSIO_EPCS_PHYRESET_N BIT(7) +#define HSIO_RESET_N BIT(12) + +#define HSIO_IOB_RXENA BIT(0) +#define HSIO_IOB_TXENA BIT(1) +#define HSIO_IOB_A_0_TXOE BIT(2) +#define HSIO_IOB_A_0_M1M0_2 BIT(4) +#define HSIO_IOB_A_0_M1M0_MASK GENMASK(4, 3) +#define HSIO_PHYX1_EPCS_SEL BIT(12) +#define HSIO_PCIE_AB_SELECT BIT(13) + +#define HSIO_PHY_STS0 0x4 +#define HSIO_LANE0_TX_PLL_LOCK BIT(4) +#define HSIO_LANE1_TX_PLL_LOCK BIT(12) + +#define HSIO_CTRL2 0x8 +#define HSIO_LTSSM_ENABLE BIT(4) +#define HSIO_BUTTON_RST_N BIT(21) +#define HSIO_PERST_N BIT(22) +#define HSIO_POWER_UP_RST_N BIT(23) + +#define HSIO_PCIE_STS0 0xc +#define HSIO_PM_REQ_CORE_RST BIT(19) + +#define HSIO_REG48_PMA_STATUS 0x30 +#define HSIO_REG48_PMA_RDY BIT(7) + +struct imx_hsio_drvdata { + int lane_num; +}; + +struct imx_hsio_lane { + u32 ctrl_index; + u32 ctrl_off; + u32 idx; + u32 phy_off; + u32 phy_type; + const char * const *clk_names; + struct clk_bulk_data clks[LANE_NUM_CLKS]; + struct imx_hsio_priv *priv; + struct phy *phy; + enum phy_mode phy_mode; +}; + +struct imx_hsio_priv { + void __iomem *base; + struct device *dev; + struct mutex lock; + const char *hsio_cfg; + const char *refclk_pad; + u32 open_cnt; + struct regmap *phy; + struct regmap *ctrl; + struct regmap *misc; + const struct imx_hsio_drvdata *drvdata; + struct imx_hsio_lane lane[MAX_NUM_LANE]; +}; + +static const char * const lan0_pcie_clks[] = {"apb_pclk0", "pclk0", "ctl0_crr", + "phy0_crr", "misc_crr"}; +static const char * const lan1_pciea_clks[] = {"apb_pclk1", "pclk1", "ctl0_crr", + "phy0_crr", "misc_crr"}; +static const char * const lan1_pcieb_clks[] = {"apb_pclk1", "pclk1", "ctl1_crr", + "phy0_crr", "misc_crr"}; +static const char * const lan2_pcieb_clks[] = {"apb_pclk2", "pclk2", "ctl1_crr", + "phy1_crr", "misc_crr"}; +static const char * const lan2_sata_clks[] = {"pclk2", "epcs_tx", "epcs_rx", + "phy1_crr", "misc_crr"}; + +static const struct regmap_config regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int imx_hsio_init(struct phy *phy) +{ + int ret, i; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + struct device *dev = priv->dev; + + /* Assign clocks refer to different modes */ + switch (lane->phy_type) { + case PHY_TYPE_PCIE: + lane->phy_mode = PHY_MODE_PCIE; + if (lane->ctrl_index == 0) { /* PCIEA */ + lane->ctrl_off = 0; + lane->phy_off = 0; + + for (i = 0; i < LANE_NUM_CLKS; i++) { + if (lane->idx == 0) + lane->clks[i].id = lan0_pcie_clks[i]; + else + lane->clks[i].id = lan1_pciea_clks[i]; + } + } else { /* PCIEB */ + if (lane->idx == 0) { /* i.MX8QXP */ + lane->ctrl_off = 0; + lane->phy_off = 0; + } else { + /* + * On i.MX8QM, only second or third lane can be + * bound to PCIEB. + */ + lane->ctrl_off = SZ_64K; + if (lane->idx == 1) + lane->phy_off = 0; + else /* the third lane is bound to PCIEB */ + lane->phy_off = SZ_64K; + } + + for (i = 0; i < LANE_NUM_CLKS; i++) { + if (lane->idx == 1) + lane->clks[i].id = lan1_pcieb_clks[i]; + else if (lane->idx == 2) + lane->clks[i].id = lan2_pcieb_clks[i]; + else /* i.MX8QXP only has PCIEB, idx is 0 */ + lane->clks[i].id = lan0_pcie_clks[i]; + } + } + break; + case PHY_TYPE_SATA: + /* On i.MX8QM, only the third lane can be bound to SATA */ + lane->phy_mode = PHY_MODE_SATA; + lane->ctrl_off = SZ_128K; + lane->phy_off = SZ_64K; + + for (i = 0; i < LANE_NUM_CLKS; i++) + lane->clks[i].id = lan2_sata_clks[i]; + break; + default: + return -EINVAL; + } + + /* Fetch clocks and enable them */ + ret = devm_clk_bulk_get(dev, LANE_NUM_CLKS, lane->clks); + if (ret) + return ret; + ret = clk_bulk_prepare_enable(LANE_NUM_CLKS, lane->clks); + if (ret) + return ret; + + /* allow the clocks to stabilize */ + usleep_range(200, 500); + return 0; +} + +static int imx_hsio_exit(struct phy *phy) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + + clk_bulk_disable_unprepare(LANE_NUM_CLKS, lane->clks); + + return 0; +} + +static void imx_hsio_pcie_phy_resets(struct phy *phy) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + regmap_clear_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_BUTTON_RST_N); + regmap_clear_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_PERST_N); + regmap_clear_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_POWER_UP_RST_N); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_BUTTON_RST_N); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_PERST_N); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_POWER_UP_RST_N); + + if (lane->idx == 1) { + regmap_set_bits(priv->phy, lane->phy_off + HSIO_CTRL0, + HSIO_APB_RSTN_1); + regmap_set_bits(priv->phy, lane->phy_off + HSIO_CTRL0, + HSIO_PIPE_RSTN_1_MASK); + } else { + regmap_set_bits(priv->phy, lane->phy_off + HSIO_CTRL0, + HSIO_APB_RSTN_0); + regmap_set_bits(priv->phy, lane->phy_off + HSIO_CTRL0, + HSIO_PIPE_RSTN_0_MASK); + } +} + +static void imx_hsio_sata_phy_resets(struct phy *phy) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + /* clear PHY RST, then set it */ + regmap_clear_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_PHYRESET_N); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_PHYRESET_N); + + /* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */ + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, HSIO_RESET_N); + udelay(1); + regmap_clear_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_RESET_N); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, HSIO_RESET_N); +} + +static void imx_hsio_configure_clk_pad(struct phy *phy) +{ + bool pll = false; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + if (strncmp(priv->refclk_pad, "output", 6) == 0) { + pll = true; + regmap_update_bits(priv->misc, HSIO_CTRL0, + HSIO_IOB_A_0_TXOE | HSIO_IOB_A_0_M1M0_MASK, + HSIO_IOB_A_0_TXOE | HSIO_IOB_A_0_M1M0_2); + } else { + regmap_update_bits(priv->misc, HSIO_CTRL0, + HSIO_IOB_A_0_TXOE | HSIO_IOB_A_0_M1M0_MASK, + 0); + } + + regmap_update_bits(priv->misc, HSIO_CTRL0, HSIO_IOB_RXENA, + pll ? 0 : HSIO_IOB_RXENA); + regmap_update_bits(priv->misc, HSIO_CTRL0, HSIO_IOB_TXENA, + pll ? HSIO_IOB_TXENA : 0); +} + +static void imx_hsio_pre_set(struct phy *phy) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + if (strncmp(priv->hsio_cfg, "pciea-x2-pcieb", 14) == 0) { + regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PCIE_AB_SELECT); + } else if (strncmp(priv->hsio_cfg, "pciea-x2-sata", 13) == 0) { + regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PHYX1_EPCS_SEL); + } else if (strncmp(priv->hsio_cfg, "pciea-pcieb-sata", 16) == 0) { + regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PCIE_AB_SELECT); + regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PHYX1_EPCS_SEL); + } + + imx_hsio_configure_clk_pad(phy); +} + +static int imx_hsio_pcie_power_on(struct phy *phy) +{ + int ret; + u32 val, addr, cond; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + imx_hsio_pcie_phy_resets(phy); + + /* Toggle apb_pclk to make sure PM_REQ_CORE_RST is cleared. */ + clk_disable_unprepare(lane->clks[0].clk); + mdelay(1); + ret = clk_prepare_enable(lane->clks[0].clk); + if (ret) { + dev_err(priv->dev, "unable to enable phy apb_pclk\n"); + return ret; + } + + addr = lane->ctrl_off + HSIO_PCIE_STS0; + cond = HSIO_PM_REQ_CORE_RST; + ret = regmap_read_poll_timeout(priv->ctrl, addr, val, + (val & cond) == 0, + PHY_INIT_WAIT_USLEEP_MAX, + PHY_INIT_WAIT_TIMEOUT); + if (ret) + dev_err(priv->dev, "HSIO_PM_REQ_CORE_RST is set\n"); + return ret; +} + +static int imx_hsio_sata_power_on(struct phy *phy) +{ + int ret; + u32 val, cond; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + regmap_set_bits(priv->phy, lane->phy_off + HSIO_CTRL0, HSIO_APB_RSTN_0); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_TXDEEMP); + regmap_set_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_TXDEEMP_SEL); + + imx_hsio_sata_phy_resets(phy); + + cond = HSIO_REG48_PMA_RDY; + ret = read_poll_timeout(readb, val, ((val & cond) == cond), + PHY_INIT_WAIT_USLEEP_MAX, + PHY_INIT_WAIT_TIMEOUT, false, + priv->base + HSIO_REG48_PMA_STATUS); + if (ret) + dev_err(priv->dev, "PHY calibration is timeout\n"); + else + dev_dbg(priv->dev, "PHY calibration is done\n"); + + return ret; +} + +static int imx_hsio_power_on(struct phy *phy) +{ + int ret; + u32 val, cond; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + scoped_guard(mutex, &priv->lock) { + if (!priv->open_cnt) + imx_hsio_pre_set(phy); + priv->open_cnt++; + } + + if (lane->phy_mode == PHY_MODE_PCIE) + ret = imx_hsio_pcie_power_on(phy); + else /* SATA */ + ret = imx_hsio_sata_power_on(phy); + if (ret) + return ret; + + /* Polling to check the PHY is ready or not. */ + if (lane->idx == 1) + cond = HSIO_LANE1_TX_PLL_LOCK; + else + /* + * Except the phy_off, the bit-offset of lane2 is same to lane0. + * Merge the lane0 and lane2 bit-operations together. + */ + cond = HSIO_LANE0_TX_PLL_LOCK; + + ret = regmap_read_poll_timeout(priv->phy, lane->phy_off + HSIO_PHY_STS0, + val, ((val & cond) == cond), + PHY_INIT_WAIT_USLEEP_MAX, + PHY_INIT_WAIT_TIMEOUT); + if (ret) { + dev_err(priv->dev, "IMX8Q PHY%d PLL lock timeout\n", lane->idx); + return ret; + } + dev_dbg(priv->dev, "IMX8Q PHY%d PLL is locked\n", lane->idx); + + return ret; +} + +static int imx_hsio_power_off(struct phy *phy) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + scoped_guard(mutex, &priv->lock) { + priv->open_cnt--; + if (priv->open_cnt == 0) { + regmap_clear_bits(priv->misc, HSIO_CTRL0, + HSIO_PCIE_AB_SELECT); + regmap_clear_bits(priv->misc, HSIO_CTRL0, + HSIO_PHYX1_EPCS_SEL); + + if (lane->phy_mode == PHY_MODE_PCIE) { + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL2, + HSIO_BUTTON_RST_N); + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL2, + HSIO_PERST_N); + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL2, + HSIO_POWER_UP_RST_N); + } else { + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_TXDEEMP); + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL0, + HSIO_EPCS_TXDEEMP_SEL); + regmap_clear_bits(priv->ctrl, + lane->ctrl_off + HSIO_CTRL0, + HSIO_RESET_N); + } + + if (lane->idx == 1) { + regmap_clear_bits(priv->phy, + lane->phy_off + HSIO_CTRL0, + HSIO_APB_RSTN_1); + regmap_clear_bits(priv->phy, + lane->phy_off + HSIO_CTRL0, + HSIO_PIPE_RSTN_1_MASK); + } else { + /* + * Except the phy_off, the bit-offset of lane2 is same + * to lane0. Merge the lane0 and lane2 bit-operations + * together. + */ + regmap_clear_bits(priv->phy, + lane->phy_off + HSIO_CTRL0, + HSIO_APB_RSTN_0); + regmap_clear_bits(priv->phy, + lane->phy_off + HSIO_CTRL0, + HSIO_PIPE_RSTN_0_MASK); + } + } + } + + return 0; +} + +static int imx_hsio_set_mode(struct phy *phy, enum phy_mode mode, + int submode) +{ + u32 val; + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + if (lane->phy_mode != mode) + return -EINVAL; + + val = (mode == PHY_MODE_PCIE) ? HSIO_MODE_PCIE : HSIO_MODE_SATA; + val = FIELD_PREP(HSIO_MODE_MASK, val); + regmap_update_bits(priv->phy, lane->phy_off + HSIO_CTRL0, + HSIO_MODE_MASK, val); + + switch (submode) { + case PHY_MODE_PCIE_RC: + val = FIELD_PREP(HSIO_DEVICE_TYPE_MASK, PCI_EXP_TYPE_ROOT_PORT); + break; + case PHY_MODE_PCIE_EP: + val = FIELD_PREP(HSIO_DEVICE_TYPE_MASK, PCI_EXP_TYPE_ENDPOINT); + break; + default: /* Support only PCIe EP and RC now. */ + return 0; + } + if (submode) + regmap_update_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL0, + HSIO_DEVICE_TYPE_MASK, val); + + return 0; +} + +static int imx_hsio_set_speed(struct phy *phy, int speed) +{ + struct imx_hsio_lane *lane = phy_get_drvdata(phy); + struct imx_hsio_priv *priv = lane->priv; + + regmap_update_bits(priv->ctrl, lane->ctrl_off + HSIO_CTRL2, + HSIO_LTSSM_ENABLE, + speed ? HSIO_LTSSM_ENABLE : 0); + return 0; +} + +static const struct phy_ops imx_hsio_ops = { + .init = imx_hsio_init, + .exit = imx_hsio_exit, + .power_on = imx_hsio_power_on, + .power_off = imx_hsio_power_off, + .set_mode = imx_hsio_set_mode, + .set_speed = imx_hsio_set_speed, + .owner = THIS_MODULE, +}; + +static const struct imx_hsio_drvdata imx8qxp_hsio_drvdata = { + .lane_num = 0x1, +}; + +static const struct imx_hsio_drvdata imx8qm_hsio_drvdata = { + .lane_num = 0x3, +}; + +static const struct of_device_id imx_hsio_of_match[] = { + {.compatible = "fsl,imx8qm-hsio", .data = &imx8qm_hsio_drvdata}, + {.compatible = "fsl,imx8qxp-hsio", .data = &imx8qxp_hsio_drvdata}, + { }, +}; +MODULE_DEVICE_TABLE(of, imx_hsio_of_match); + +static struct phy *imx_hsio_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct imx_hsio_priv *priv = dev_get_drvdata(dev); + int idx = args->args[0]; + int phy_type = args->args[1]; + int ctrl_index = args->args[2]; + + if (idx < 0 || idx >= priv->drvdata->lane_num) + return ERR_PTR(-EINVAL); + priv->lane[idx].idx = idx; + priv->lane[idx].phy_type = phy_type; + priv->lane[idx].ctrl_index = ctrl_index; + + return priv->lane[idx].phy; +} + +static int imx_hsio_probe(struct platform_device *pdev) +{ + int i; + void __iomem *off; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct imx_hsio_priv *priv; + struct phy_provider *provider; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = &pdev->dev; + priv->drvdata = of_device_get_match_data(dev); + + /* Get HSIO configuration mode */ + if (of_property_read_string(np, "fsl,hsio-cfg", &priv->hsio_cfg)) + priv->hsio_cfg = "pciea-pcieb-sata"; + /* Get PHY refclk pad mode */ + if (of_property_read_string(np, "fsl,refclk-pad-mode", + &priv->refclk_pad)) + priv->refclk_pad = NULL; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + off = devm_platform_ioremap_resource_byname(pdev, "phy"); + priv->phy = devm_regmap_init_mmio(dev, off, ®map_config); + if (IS_ERR(priv->phy)) + return dev_err_probe(dev, PTR_ERR(priv->phy), + "unable to find phy csr registers\n"); + + off = devm_platform_ioremap_resource_byname(pdev, "ctrl"); + priv->ctrl = devm_regmap_init_mmio(dev, off, ®map_config); + if (IS_ERR(priv->ctrl)) + return dev_err_probe(dev, PTR_ERR(priv->ctrl), + "unable to find ctrl csr registers\n"); + + off = devm_platform_ioremap_resource_byname(pdev, "misc"); + priv->misc = devm_regmap_init_mmio(dev, off, ®map_config); + if (IS_ERR(priv->misc)) + return dev_err_probe(dev, PTR_ERR(priv->misc), + "unable to find misc csr registers\n"); + + for (i = 0; i < priv->drvdata->lane_num; i++) { + struct imx_hsio_lane *lane = &priv->lane[i]; + struct phy *phy; + + phy = devm_phy_create(&pdev->dev, NULL, &imx_hsio_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + lane->priv = priv; + lane->phy = phy; + lane->idx = i; + phy_set_drvdata(phy, lane); + } + + dev_set_drvdata(dev, priv); + dev_set_drvdata(&pdev->dev, priv); + + provider = devm_of_phy_provider_register(&pdev->dev, imx_hsio_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver imx_hsio_driver = { + .probe = imx_hsio_probe, + .driver = { + .name = "imx8qm-hsio-phy", + .of_match_table = imx_hsio_of_match, + } +}; +module_platform_driver(imx_hsio_driver); + +MODULE_DESCRIPTION("FSL IMX8QM HSIO SERDES PHY driver"); +MODULE_LICENSE("GPL");