From patchwork Mon Jul 8 12:22:32 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726571 Received: from mail-lj1-f172.google.com (mail-lj1-f172.google.com [209.85.208.172]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A2BAB80624 for ; Mon, 8 Jul 2024 12:22:59 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.172 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441381; cv=none; b=QbauwtOJ301xdN2J/rmy4sHFyiK54GFCeN1VtxSwTFdRyGIvE21uIw8LGH7xNu7IfYuIWn28qCDAlMxuZwq0dC4EMVUruTxx9ZFP/KZLn8iPK08Mgcc8KTvpDHczFL7vf3PKWAL38CaZDRZ2KoVU2XBE/2N48FOgGIuh4nmzkRk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441381; c=relaxed/simple; bh=zdfsoAzyLAbSewXaL8pr+o+HVHsk0A6l8l6d96EVyr8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=HiaZPfkXe+p1++CBiwNq5vdDFCG0H77778lBSeUj19VbYFABWeIbc+W+vlAdk3VV0/x1wZ1hUlyERLR361HGgPNQwaAtheHpVYBMCpuqvqa2bRCT1mKJh4xelFgiPlPaPvbtwOyJ5+Se3igqOU/LlTrD2pPpWI/fPeVbbp4ZYBE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=Q/oWj3bK; arc=none smtp.client-ip=209.85.208.172 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="Q/oWj3bK" Received: by mail-lj1-f172.google.com with SMTP id 38308e7fff4ca-2eaae2a6dc1so56719571fa.0 for ; Mon, 08 Jul 2024 05:22:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441378; x=1721046178; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=PbLszSI/br9z0FG/eAMCh9e/nJJvaShjV+30v8TNl/U=; b=Q/oWj3bKCiKPckqHELh720Jig2MQETxY8RwxmOFm10uPs82rH00A/k+YI4TeXU9kuS jDWeWu847YZVv6gVXnOwQI2XfGm7u4XerevceId1DQQ9CdwsNVi9astNRA91/tT96+iR vs3pDXENd2g60yHKugLOqz3CktjXUfcU+k7jahFg0E8FX1ASxYkywahYyXdps1wKLoK5 ID8J/DFtZ+DCxHNrKHScKExQjpgpjzALyuf9ZJ4ZX6rX+O4bch4QxWq9mJ9kXjhlFMik 5QTB2NOEBrl9R5dry6/NEwJb+CSBMsztJEvox+TmkyxKPIfIvcG2mRM3A7qyqwtak9QY OS0g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441378; x=1721046178; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=PbLszSI/br9z0FG/eAMCh9e/nJJvaShjV+30v8TNl/U=; b=ZUENvZDbLbUJ2yBoP4MtGF3cKXtDxGIVGbB83CR53URAuWaO5jv0MyUi/cluTOpWtL OW45Bwm3LROS2mu8wZ1KzLbj2HEebfYhNWLGLbPHtZxqq7ir0Eq0YZM0l7f1VzSTrRYD u6/mLg2v62W7cYo0cOYArqVvAqaYiloJ0AacAonH1jV173BayW2mNUSeIym+lXEVZTi+ tMdBoflH0e6eQ6T3SGGaO3Ot3AYUUIB35PRHfJIQITku2NPy8LYy1hK3v5KPTLhA3ndR MvVzaT3y618hsmVsIijGXFt8tX9MpimwXfmrrnSge/E8HZ2Fs1vIz0YQhv9bg91YsK74 GbrA== X-Forwarded-Encrypted: i=1; AJvYcCX3bG4zYyV2ylHinaMRnnVcwz6ZvyQKu0sy/SLhby+jPO2D5gYcWwK2qWPURAXzmHw9V+9aMxSZmOG2Ah5CaOwtoSndTT+kK8sDYB2/PA== X-Gm-Message-State: AOJu0Yx/OJ6zjdZgdW8bK2WsiAl9NEX9EpeUpQfN8qM7xq0sGPvQGEbZ oqTSNV/Jh7kGw2YorVV1t+ZoYZJKWpVSfMeXxhf7fkVuNk1imO1ZG8zE+lfaUmo= X-Google-Smtp-Source: AGHT+IFn77trltQqWJUC7HwUwAV9/FoLFv40dOZn7MBfPPSTS8mslfo9giZi2I2GuxPjd5Q2CxipSw== X-Received: by 2002:a2e:891a:0:b0:2ee:4a67:3d82 with SMTP id 38308e7fff4ca-2ee8eda7b6amr103735721fa.28.1720441377480; Mon, 08 Jul 2024 05:22:57 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.22.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:22:57 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:32 +0200 Subject: [PATCH v15 01/10] MAINTAINERS: Include new Qualcomm CPR drivers in the file list Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-1-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=1035; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=zdfsoAzyLAbSewXaL8pr+o+HVHsk0A6l8l6d96EVyr8=; b=LpwqLXpJhzhQfa8V5wMBtIxnsqOXE/ulRmNbkCS+oEfoVwQUK1E//z2KbxitZfkiSCZH8wb+x 8M2euuAiPRACqG/MjCHRX/sPC9Xiys3gtAm9GuPfIP3GLvj6TvPw8fd X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Expand the Qualcomm Core Power Reduction section to include the files concerning CPR3+ support. Signed-off-by: Konrad Dybcio --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index dcb37b635f2c..f3e013a52c16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18687,14 +18687,15 @@ F: Documentation/accel/qaic/ F: drivers/accel/qaic/ F: include/uapi/drm/qaic_accel.h -QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER +QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVERS M: Bjorn Andersson M: Konrad Dybcio L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml -F: drivers/pmdomain/qcom/cpr.c +F: Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml +F: drivers/pmdomain/qcom/cpr*.c QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 M: Ilia Lin From patchwork Mon Jul 8 12:22:33 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726572 Received: from mail-ej1-f51.google.com (mail-ej1-f51.google.com [209.85.218.51]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C271981211 for ; Mon, 8 Jul 2024 12:23:01 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.51 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441383; cv=none; b=Md8CaB1Wbl7+pOj/br8pN/dChLcdgDDvMYn86x7tDPZbSCFKBiwtstlSoiESJmoegs5Ao45PhfsVPvSpNduZg8VKzlH2UbpWmfIPqHSvv2x7MbDqurRENtR6hTWSQmVHFGavx+LxOsix4s9spNjIJsjP/VUn5NUuhRt0w37Ie3Y= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441383; c=relaxed/simple; bh=YS331u/IScHChATk8p7aL3JRzn+3f0/zhE16HH8SRSg=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=eHSKjqStc95PFxMskrODcRi4Pz91CjFgnweGCHsMvGvTIeff+ZnnRdWzWIBqmI/GGzNq3goMkTadesH9WsdEKCPSBWnyV0H0lIgob3yM5gPU/xcJNxr10Gcrh4B9a5xYC1+J4pfQcEXRAf9FBfOl1kBDX1Yi/qo9HIWb5NLIbeY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=M/gIXr8W; arc=none smtp.client-ip=209.85.218.51 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="M/gIXr8W" Received: by mail-ej1-f51.google.com with SMTP id a640c23a62f3a-a75131ce948so465355566b.2 for ; Mon, 08 Jul 2024 05:23:01 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441380; x=1721046180; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=KuoGIEtLY+sG9K81klkUtIfsNH9bTZF+T0WBDkLiP+Y=; b=M/gIXr8WAFooNn7+uWmO8b2rRBTL4a7nYJmhoZUGMukLF9UfZ+sHiATOGF3z8Ykooq hCOs+FQyicG4eQIjFKd1JmB3WQUKwTN2DX4ySFgqEoELa4iKtWC4RPU6UKjO3eR2rfaO pI9m/qS9sK/GJ5KnT9rSckYd/2ffBTc5v5QN6UwHMhMdhmA2jt9TGonDAgQKUXWKzENv FGEvdLfdqETkgOzpEw9H1ilGJo6eYGUmdQoZ7ul0Yym3sQp2lWmvIPc1gKSeKxLyhiUD bXgfkIQX5nOqcRMPdkoDK8HN96X8IcH4kIKfx2RWF2Mp0wo51dGCam8ed+ImqPFsLwFF DNMA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441380; x=1721046180; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=KuoGIEtLY+sG9K81klkUtIfsNH9bTZF+T0WBDkLiP+Y=; b=FiooGG99jwDotySSAIEZ5QvyWfcpx/BWvugSiIBquRLqc/q1OyuaCqyiyG/NM9G37A IOU2LO3gjpPLywF7v9xsaMdWX0KYhOnMZb9/zyhit/M+JiJWPOWnSWBYlUQFreHop9Hg SrRCoAdVoW2qO+RtDtySPq8q0OEU5egccTqauSeBf1MfXHvql0TLY4MKQCdQ6ACC40AO vVQ+ZFc+v45YvNHfr9E1t4XPm2guOsvJmoiSnOBFJ0St3LAXOqlb2PZqceN3R6qLPW1K 5VMAdaXja62zoBwRs61jd+JslqZcbYho5sTWvwO6PYDwQHodPhF271OfCy31MF9p6FVg 2itA== X-Forwarded-Encrypted: i=1; AJvYcCU52bFKZTpREvJnNfQ9xk9WLUzbHEDG583jPOHniaE0bdRljOeUWU8hDsxI+JII/cM/ATzLr0x1imgLSglMQOliMYuU48JwoqXFTESZ2w== X-Gm-Message-State: AOJu0YzlVf5rMPSOsgqv91GquxLySPTiqBvQvKoCKAwObIM0rkyXhDaW omBvCFrVfC6VxyEj4dKIFsbOW4o0PM1XAq9tbW159OAPlhNDzIIbWii5WIQpW6A= X-Google-Smtp-Source: AGHT+IFsv0xnzPRSLt3WVV1W7Q5iYcFTyqb19d+OrVEXe8LFZ/SMKdneIgEa59nbjfQgeGZ1WzSZDQ== X-Received: by 2002:a17:906:b11:b0:a77:db36:1ccc with SMTP id a640c23a62f3a-a77db361dbcmr561338666b.24.1720441380037; Mon, 08 Jul 2024 05:23:00 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.22.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:22:59 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:33 +0200 Subject: [PATCH v15 02/10] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-2-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , Krzysztof Kozlowski X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=1573; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=YS331u/IScHChATk8p7aL3JRzn+3f0/zhE16HH8SRSg=; b=uNRqYMh/GkR9tuyunemDFYhU/xn9vIoAkwNKZTtZ5batuz+sXQqmlvlrnW0DwTRPo0MvR9slD 8EjaugTz36YDu9o6x6nZj536R7z0ZkcUzz5gAvMEgu6ZL9IiR5sv1Kk X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= CPR3 and newer can be fed per-OPP voltage adjustment values for both open- and closed-loop paths to make better decisions about settling on the final voltage offset target. Document these properties. Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Krzysztof Kozlowski Signed-off-by: Konrad Dybcio --- .../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml index a30ef93213c0..b203ea01b17a 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml @@ -34,6 +34,20 @@ patternProperties: minItems: 1 maxItems: 2 + qcom,opp-cloop-vadj: + description: | + An array of per-thread values representing the closed-loop + voltage adjustment value associated with this OPP node. + $ref: /schemas/types.yaml#/definitions/int32-array + maxItems: 2 + + qcom,opp-oloop-vadj: + description: | + An array of per-thread values representing the open-loop + voltage adjustment value associated with this OPP node. + $ref: /schemas/types.yaml#/definitions/int32-array + maxItems: 2 + required: - opp-level - qcom,opp-fuse-level From patchwork Mon Jul 8 12:22:34 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726573 Received: from mail-ed1-f51.google.com (mail-ed1-f51.google.com [209.85.208.51]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 73049839EB for ; Mon, 8 Jul 2024 12:23:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.51 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441386; cv=none; b=FVeE1R0ytWbxW4lubHRHqq3zpGkwUC8luhLAOb/4XlZqpW3qSWL8qkj+4Etn/WTxXDZj473LpfGh13FRcnvN2t/A3g8EDiF0WL3wluYkaoVU+KwA7AjDjDj6vc2wPZaxaEdSihallQEPmonrUv2cADLP7pwQKedE3G9E0n7aNYs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441386; c=relaxed/simple; bh=a9ltpCCByjdBmPwzY8NTJCgzDHbIcqn2UsHtrfrIUGg=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=VlBwn8c2KrxB/pyvgV9HE9M4npOQCdYylyGJlJWMeszQq5oorCwDSalcXg27yXkZ1df/BR1X1dmpFG6zdi1vqlbf2CEu8yX3K1P18LqiWMjLe+2RU/XVFQ0+BUCt6ju3988zMFUKupV2enN959L5mHsyoXGeYfXcjgvAmQ2m3Vw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=atM897Iu; arc=none smtp.client-ip=209.85.208.51 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="atM897Iu" Received: by mail-ed1-f51.google.com with SMTP id 4fb4d7f45d1cf-58b0dddab8cso5667578a12.0 for ; Mon, 08 Jul 2024 05:23:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441383; x=1721046183; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Cjsp7pSBAArMHdQni+W9ujHChM6z0PA2ajKmcUfUJMI=; b=atM897IudYcXRpsJMP5fjs3c369ZkOgXekJQmgp3/xcNiaf6+fIX4sGz8BYwl9xang J+0UkuDMAVicOuYMqivv826JMtc6mvCOxODEegsfyb/QZCwpy7QkLMHFYAP7fdKgvlpP sVnglHeNbqCzppUStFSCurg6Fu+Zh0QADbMej6TsmZMVfMG+y+MUPIXCz645WEZbLgwq Q7i7DpfWM90vzsWRvWD4sYgGVqBRgEk1mFkDtDy88vA2VaN/Om8xuP5sb5xq15v2ClHS nKLwHB3n9ilupSboujG/3R6hsMW6F8130tGuiKQsrW32Y0XlWjALAtPAcZytHCCTk8Qy p0Iw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441383; x=1721046183; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Cjsp7pSBAArMHdQni+W9ujHChM6z0PA2ajKmcUfUJMI=; b=KVZCQdh9lalMXuW0uLXHmRtkSijWwZCxaU3u2nsYEEZme9VE1hXulkrMdOkMKHuBAP WZ/pTAARRuZP+jT7bU1pGRPvVrTv49RRf8kZYoQAZQayl40RnOdnUMUZkvTFxg+1YsL6 e1PjP+3i8yDoEq5N+dK9Ym6NkLFV7tGth/RTMoeM/lc9sO+DdujZg6ru40qxJ2V7k8ZP c8ljuB5ExLTA0fwDceBhENfojRw8eU9XUBlj6Y6gi/n91T5dxIqjYKrNE8SrOws43JRH hLN9Id9fQuzznFoH70Dg4mW+pigf5XFviiLIHeeMpgZLvq2lHfK1JBdfLKklSZrdIjCl Uplw== X-Forwarded-Encrypted: i=1; AJvYcCWxwy+GqJcp0KhouJpHWoPpDO8Ne+O526LpHDG3ZMsp3NljkEWoAXwrdef1p6DhqMKxjk+is/NSm3nV7Kmn/JYf2Ec85zBAvUwP7hhJuw== X-Gm-Message-State: AOJu0Yzpin9FxQro28UjVs83EOcgcgwkjqrFwAnqiequHR2Imi0aic21 w8+zwKbZL/OxgT8oUBxTCdOD59s/ADmV/ovxvn4ynOz4iBXJfiwn7u2RF7vBst4= X-Google-Smtp-Source: AGHT+IEHOSOCSTQTCAKQiQAbeH62nSmAElW3TfCdMCd1bjLHPVzqzlCm2o+YDc+pjUO8cHDBRIdJFQ== X-Received: by 2002:a17:906:81d4:b0:a77:e0ed:8bb with SMTP id a640c23a62f3a-a77e0ed09bbmr414346166b.42.1720441382755; Mon, 08 Jul 2024 05:23:02 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:02 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:34 +0200 Subject: [PATCH v15 03/10] dt-bindings: opp: v2-qcom-level: Allow opp-shared Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-3-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=790; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=a9ltpCCByjdBmPwzY8NTJCgzDHbIcqn2UsHtrfrIUGg=; b=4vzsiflIbtRjRk3Rt4GJxG4C5hZHfbRBCjf34IdI2ymD5PPib4hhrTZp2N3seAJmS0shxegbs Tl8XZiHD6rgDV5ftBxlM3T4yJ18fAzZhMJVP26R4rhhHxEYzm3nZvPT X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Some devices may use a shared OPP table, such as separate CPR threads. Allow the table to be marked as such. Signed-off-by: Konrad Dybcio Acked-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml index b203ea01b17a..cc694b254a14 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml @@ -16,6 +16,8 @@ properties: compatible: const: operating-points-v2-qcom-level + opp-shared: true + patternProperties: '^opp-?[0-9]+$': type: object From patchwork Mon Jul 8 12:22:35 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726574 Received: from mail-lf1-f49.google.com (mail-lf1-f49.google.com [209.85.167.49]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 67A0C132108 for ; Mon, 8 Jul 2024 12:23:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.49 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441390; cv=none; b=MD6lTdsksNcJ8nyKDk39Hz4ZJbOWfjZdxrtvLezepOjiRN7jTe+QYh5Wk5qdjHlfS/Wb+Xmoi+bcQX+SvHpGuMj3SCE+D5Dm3hlssvi0z9thKbeT1uHeR2mhwlyBJF5IC4YwXyVFv/rPj7yWAC933VCCU1ZD9SRTmHBqtLM13Zo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441390; c=relaxed/simple; bh=Wmml6hetLnrK6osoIWlLKX4VBPJjFr4OuDi5tTldbY8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=QMWli6tMVX9iwos/mx77alwmkydV5mUhQ0M7bA0fIxnqI2nqaqBkpG3NE6q4cQoiQMt6Kr9Ii5Gd4Q/44KTviKcr7DSs4NRA5cfOr3pd8TY78tjwSkNLSeEytGLBXMInQL1qGomDBKv7axhW/UmbBMVjdUzK41WXoYeefk6XVjU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=y9zNjX6e; arc=none smtp.client-ip=209.85.167.49 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="y9zNjX6e" Received: by mail-lf1-f49.google.com with SMTP id 2adb3069b0e04-52ea929ea56so3916169e87.0 for ; Mon, 08 Jul 2024 05:23:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441386; x=1721046186; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=DE/7eJQHePQ4xKfVi2IWIe5SUccHU+P6ps3RrhqI1kM=; b=y9zNjX6edExK4Or8S6OhbN6NwEayf4xdCasA17sX0VzooeJ9KRs59ZQiii/wj3dRMo cUL4RXW0oI19RAOrdj3moYAgtSg3CnXKilldR1ST5FBw+syoi9gnRSYCaCwSzlVlT0rd 7/0c23oO5I1pSrHvLv7ByjMy7ZxXpHVu2ci9wU7n5lbtjxOweK01NzqTGhzL7cfjwWBf hhmssQQUpDsKGvvnxUBdVBSm+0pZcLPiyaUGMG6+yP3iHfy/tcCzO0wyn5k6Kvs7GsP+ 263I+a2bSHyMwD3Uc5wS6kbONrKV9aqvupY7mk49FiTJ8ji4qZjlCzbpxqugYfRobIcY 8xhQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441386; x=1721046186; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=DE/7eJQHePQ4xKfVi2IWIe5SUccHU+P6ps3RrhqI1kM=; b=ffyPCaaH+qhQh/rIPtFrTfzAWCLsjyZKTz11e5005vqZ2JI9RQUIbcA08dTmfLGYpD OdZDrkxLJ8z3lkPS2kfFjWMTNkTDLHg8vA0PxDpfRvU4K7nmtGzJ15VXZDNw3U8ryQlV SZa+kLC6Emtex594WVcugLaHaTodrxLiV8HeWXw7ayQUWaGViIHiqlpOw7bCE0NbBTfB 6jMuriEmqt/8Lj/mQKaideQ3SY9n/W8eocR4VJ3S8Q32VH155HHCZclL+1oopocSrSPi MOzecRKFiY2Ik/ZlvLPtQR/JAHgyDwyEBjBr0q+gdBSEgLqubYdZH2QLGbc/mnsWhx8S lMmQ== X-Forwarded-Encrypted: i=1; AJvYcCUzkTP94w0n+4Nr7ka06H1QgbC/KEbRz8MzPO0svc1bt7JZDiOv/zqyu2D134qBc+pr6W/qknx0jLosIClX3zRGC1qwZOoR0MLvsaWCww== X-Gm-Message-State: AOJu0YzMkqAWaGu/PLAyL0Gj5sJ3UG/xQML42FxF9CuM77UmW6odrjd6 9hhj7qlu3xlaVHRHUnCUwGnkT1ZRfsMjptO/Q0qZk+vD6KsXcIgfWz/ko47BmZE= X-Google-Smtp-Source: AGHT+IFc+McOteL5VPmGxgxqXitDP1GUotcOSNEdtZCvOApgh6hUobyU6tTMLc/kIfASGRM8FH86QQ== X-Received: by 2002:ac2:5e2a:0:b0:52c:d2ab:693a with SMTP id 2adb3069b0e04-52ea06a673cmr7841846e87.54.1720441385476; Mon, 08 Jul 2024 05:23:05 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:05 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:35 +0200 Subject: [PATCH v15 04/10] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3+ driver Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-4-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=10110; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=ik8RK9Ie3BviA6NfBk4NawRgtBhRWoEsNL3XFx2OwzU=; b=/AkYuekKkq1NvkIP7vtRP+2OUSs1dhl7gPczC+NJQn5b5fPAcypyjqD/BarQLzFnJOT+i72OC V0COe4cddCQCoBys2F0B7Wnqmp6gIp7WH3RdPLeOseQAmW8KYKgMkCX X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno Add the bindings for the Qualcomm CPR3+ hardware. Signed-off-by: AngeloGioacchino Del Regno [Konrad: Make binding check pass, some other changes] Signed-off-by: Konrad Dybcio --- .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 286 +++++++++++++++++++++ 1 file changed, 286 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml new file mode 100644 index 000000000000..2e6712aa1c58 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Core Power Reduction v3+ + +description: + CPR (Core Power Reduction) is a technology to reduce core power of a CPU + (or another device). Each OPP of a device corresponds to a "corner" that + has a range of valid voltages for a particular frequency. + The CPR monitors dynamic factors such as temperature, etc. and suggests + or (in the CPR-hardened case) applies voltage adjustments to save power + and meet silicon characteristic requirements for a given chip unit. + +maintainers: + - Konrad Dybcio + +properties: + compatible: + oneOf: + - const: qcom,cpr3 + - const: qcom,cpr4 + - items: + - enum: + - qcom,msm8998-cprh + - qcom,sdm630-cprh + - const: qcom,cprh + + reg: + items: + - description: Register space of the CPR controller0 + - description: Register space of the CPR controller1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: CPR reference clock + + vdd-supply: + description: Autonomous Phase Control (APC) or other power supply + + '#power-domain-cells': + const: 1 + + qcom,acc: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to syscon for writing ACC settings + + nvmem-cells: + description: Cells containing the fuse corners and revision data + maxItems: 32 + + nvmem-cell-names: + maxItems: 32 + + operating-points-v2: true + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - operating-points-v2 + - "#power-domain-cells" + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-cprh + then: + properties: + nvmem-cell-names: + items: + - const: cpr_speed_bin + - const: cpr_fuse_revision + - const: cpr0_quotient1 + - const: cpr0_quotient2 + - const: cpr0_quotient3 + - const: cpr0_quotient4 + - const: cpr0_quotient_offset2 + - const: cpr0_quotient_offset3 + - const: cpr0_quotient_offset4 + - const: cpr0_init_voltage1 + - const: cpr0_init_voltage2 + - const: cpr0_init_voltage3 + - const: cpr0_init_voltage4 + - const: cpr0_ring_osc1 + - const: cpr0_ring_osc2 + - const: cpr0_ring_osc3 + - const: cpr0_ring_osc4 + - const: cpr1_quotient1 + - const: cpr1_quotient2 + - const: cpr1_quotient3 + - const: cpr1_quotient4 + - const: cpr1_quotient_offset2 + - const: cpr1_quotient_offset3 + - const: cpr1_quotient_offset4 + - const: cpr1_init_voltage1 + - const: cpr1_init_voltage2 + - const: cpr1_init_voltage3 + - const: cpr1_init_voltage4 + - const: cpr1_ring_osc1 + - const: cpr1_ring_osc2 + - const: cpr1_ring_osc3 + - const: cpr1_ring_osc4 + +examples: + - | + #include + #include + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "perf"; + }; + + cpu@100 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x100>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "perf"; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + required-opps = <&cprh_opp3>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + required-opps = <&cprh_opp3>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cprh_opp_table: opp-table-cprh { + compatible = "operating-points-v2-qcom-level"; + + cprh_opp1: opp-1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp2: opp-2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp3: opp-3 { + opp-level = <3>; + qcom,opp-fuse-level = <2 3>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + }; + + apc_cprh: power-controller@179c8000 { + compatible = "qcom,msm8998-cprh", "qcom,cprh"; + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>; + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + + operating-points-v2 = <&cprh_opp_table>; + #power-domain-cells = <1>; + + nvmem-cells = <&cpr_efuse_speedbin>, + <&cpr_fuse_revision>, + <&cpr_quot0_pwrcl>, + <&cpr_quot1_pwrcl>, + <&cpr_quot2_pwrcl>, + <&cpr_quot3_pwrcl>, + <&cpr_quot_offset1_pwrcl>, + <&cpr_quot_offset2_pwrcl>, + <&cpr_quot_offset3_pwrcl>, + <&cpr_init_voltage0_pwrcl>, + <&cpr_init_voltage1_pwrcl>, + <&cpr_init_voltage2_pwrcl>, + <&cpr_init_voltage3_pwrcl>, + <&cpr_ro_sel0_pwrcl>, + <&cpr_ro_sel1_pwrcl>, + <&cpr_ro_sel2_pwrcl>, + <&cpr_ro_sel3_pwrcl>, + <&cpr_quot0_perfcl>, + <&cpr_quot1_perfcl>, + <&cpr_quot2_perfcl>, + <&cpr_quot3_perfcl>, + <&cpr_quot_offset1_perfcl>, + <&cpr_quot_offset2_perfcl>, + <&cpr_quot_offset3_perfcl>, + <&cpr_init_voltage0_perfcl>, + <&cpr_init_voltage1_perfcl>, + <&cpr_init_voltage2_perfcl>, + <&cpr_init_voltage3_perfcl>, + <&cpr_ro_sel0_perfcl>, + <&cpr_ro_sel1_perfcl>, + <&cpr_ro_sel2_perfcl>, + <&cpr_ro_sel3_perfcl>; + nvmem-cell-names = "cpr_speed_bin", + "cpr_fuse_revision", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_quotient4", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_quotient_offset4", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_init_voltage4", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_ring_osc4", + "cpr1_quotient1", + "cpr1_quotient2", + "cpr1_quotient3", + "cpr1_quotient4", + "cpr1_quotient_offset2", + "cpr1_quotient_offset3", + "cpr1_quotient_offset4", + "cpr1_init_voltage1", + "cpr1_init_voltage2", + "cpr1_init_voltage3", + "cpr1_init_voltage4", + "cpr1_ring_osc1", + "cpr1_ring_osc2", + "cpr1_ring_osc3", + "cpr1_ring_osc4"; + }; +... From patchwork Mon Jul 8 12:22:36 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726575 Received: from mail-ej1-f54.google.com (mail-ej1-f54.google.com [209.85.218.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F1E2D136673 for ; Mon, 8 Jul 2024 12:23:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.54 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441393; cv=none; b=uu0Nuy2BhxZ6eSb6d4RbMQVoGaJxkXx3AT61QoIPb7LFtFjEVFOikn2j0+78hUXxGVURAWOydkPlGyF5lHdpq7HvASTr9vyCN+0SWCCGCXCgWnQF83QRzaGsUPf5J0HkNUUInAWo9uuMtp2UavaVv6/18c640lEwBakFImPYWi4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441393; c=relaxed/simple; bh=Q+VAlLYMOp5MIY79Q0WvgVnHLERzyd0bCxr6A8Ekaz4=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=hC1LEOOSQeiVhm8Ucd9SrVt62KNrGkqZwvQNK6Qw6cBik5POdfo/jnHOWjDGcG3CnvRFICW0z2TDVe6wVOWnXlreDgvg6uGCmMxUCdz6WbvKy4o1u44iip8u5+E9PuYlWHdMvnNOypGX0x2dVYKf7G4yuUJ7bTFdA743CKUN8Hw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=BYBv4P9Z; arc=none smtp.client-ip=209.85.218.54 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="BYBv4P9Z" Received: by mail-ej1-f54.google.com with SMTP id a640c23a62f3a-a77d9217e6fso276608866b.2 for ; Mon, 08 Jul 2024 05:23:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441388; x=1721046188; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=EZgBD3gVYnXHHXpR/VnzgqG/v0qlZBpDJ/jzd7M4/Fk=; b=BYBv4P9ZNUDZ+qL0vVSkhuSXn1/zP22QiI1EMt/nVqNuawD+lIsBZPWA/0XgJluS4n ho9AzTl8o5C2xGZs/3VYQ+DONjdyTLVNEv9+It9Jy52/QypWpUwhsgI8TEvOJUbdTXTz 9D2m64g3JD0BTzxAeWj/t1olvHhnRcaB2ejak6NpYQRa662CQKralzu2LRO4961UJh0+ 7Nflqq5JM97kIWBCcNCPCIQObRRJ+gC0x0f3qo57a7+fgZrHL7oSOaJFJO9lmh4+n0MW ptrojdJDHtlEPAUbv0CmszVxtEfTid/NG76qE/GNAwqju8Q8LDgSuiV4489HP0of5j97 MACg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441388; x=1721046188; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=EZgBD3gVYnXHHXpR/VnzgqG/v0qlZBpDJ/jzd7M4/Fk=; b=MHfCyVF12HMCMJGELMKN5oOn4miXL0EX9rWW37u8cIx+UUKxtJpSp5WAPASDL45kxX xxbF5lkEtpVITokQex6D1vujLkZNSU5hufgB5+AyI0ecO8qNlG775KOc7i66qN6DVL0F 2I5lAfs3NBmEH5Gq/rK6dalnVF6nS+8ysRZStxu66y/ofmkc/qhi1DmCxdGPc5ZEeOvn 1zLgXVFelDulGmJZY8QPLgOzwKBMnNKlb5Hpei3KmTcPkOHLWLsNId3rbpz4iTIUAVkN MQCbZLJK83ff8iRqpjyATid1y8zTIIsFZslt2cKO2vgXqmlaBMBe3izBbl7CHPn/Ie5l Kffw== X-Forwarded-Encrypted: i=1; AJvYcCXZE0/06HCTIMWfLTom10PdRDn1e9tTGGSQYFaN/hPZUQ85yi1n1366nfrLHNpjMmjQ9/0/6gPlMRi2+j4/VDGkrkjU+987TbsrQeUlkw== X-Gm-Message-State: AOJu0Yz/pa47kdWMELXVnysM5pzf1WmU790JO33w1KOiN4H57yrD8USw oyCtx8t8Ru3j67BFqQ0DW7xyPMIv4Z2IGISN9OTz9kTcEzqbsb9zAsQhzuQtJio= X-Google-Smtp-Source: AGHT+IG1kn1FW35D/OzeCSWmKpkLtaDyUgB6S3DQOLLArEZCxLJ9RhvxQo0zo9/2VOIc3CuT5CyAZA== X-Received: by 2002:a17:906:fa0e:b0:a72:8d2f:859c with SMTP id a640c23a62f3a-a77ba48deb1mr743889966b.33.1720441388190; Mon, 08 Jul 2024 05:23:08 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:07 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:36 +0200 Subject: [PATCH v15 05/10] soc: qcom: cpr: Move common functions to new file Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-5-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=27721; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=IojHsI6SZCn84cVTAQ3F2sdHAC66AjT5sC7QtbU/Jxk=; b=PGbgD1JkGAmUt7EDqL0du8LjUVqmOkUms06N9NhiCXrox0XDxIbcLFYcR3Ds5lwohXOuoARY+ S0PEWxs2A9kAGkP4BbnPxBVwe5rX3EbAp9eIXA8LAtwzsVgNGdu9T+8 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno In preparation for implementing a new driver that will be handling CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new file. Update cpr_get_fuses in preparation for CPR3 implementation, change parameters where necessary to not take cpr.c private data structures. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, apply review comments, improve msg, split] Signed-off-by: Konrad Dybcio --- drivers/pmdomain/qcom/Makefile | 2 +- drivers/pmdomain/qcom/cpr-common.c | 350 +++++++++++++++++++++++++++++++++ drivers/pmdomain/qcom/cpr-common.h | 103 ++++++++++ drivers/pmdomain/qcom/cpr.c | 384 ++----------------------------------- 4 files changed, 475 insertions(+), 364 deletions(-) diff --git a/drivers/pmdomain/qcom/Makefile b/drivers/pmdomain/qcom/Makefile index 403dfc5af095..b28c8d9128c4 100644 --- a/drivers/pmdomain/qcom/Makefile +++ b/drivers/pmdomain/qcom/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o diff --git a/drivers/pmdomain/qcom/cpr-common.c b/drivers/pmdomain/qcom/cpr-common.c new file mode 100644 index 000000000000..ea85f6b4bef8 --- /dev/null +++ b/drivers/pmdomain/qcom/cpr-common.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpr-common.h" + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners) +{ + struct fuse_corner *end = fuse_corner + num_fuse_corners; + u32 data; + int ret; + + for (; fuse_corner < end; fuse_corner++, cpr_fuse++) { + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data); + if (ret) + return ret; + fuse_corner->ring_osc_idx = data; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx); + +static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, + int step_volt, const char *init_v_efuse, + struct device *dev) +{ + int steps, uV; + u32 bits = 0; + int ret; + + ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits); + if (ret) + return ret; + + steps = bits & ~BIT(init_v_width - 1); + /* Not two's complement.. instead highest bit is sign bit */ + if (bits & BIT(init_v_width - 1)) + steps = -steps; + + uV = ref_uV + steps * step_size_uV; + + return DIV_ROUND_UP(uV, step_volt) * step_volt; +} + +const struct cpr_fuse *cpr_get_fuses(struct device *dev, + unsigned int num_fuse_corners) +{ + struct cpr_fuse *fuses; + int i; + + fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL); + if (!fuses) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < num_fuse_corners; i++) { + char tbuf[32]; + + snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); + fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].ring_osc) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); + fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].init_voltage) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_quotient%d", i + 1); + fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); + fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient_offset) + return ERR_PTR(-ENOMEM); + } + + return fuses; +} +EXPORT_SYMBOL_GPL(cpr_get_fuses); + +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step) +{ + int uV, ret; + + /* Populate uV */ + uV = cpr_read_fuse_uV(init_v_width, init_v_step, + fdata->ref_uV, step_volt, + cpr_fuse->init_voltage, dev); + if (uV < 0) + return uV; + + /* + * Update SoC voltages: platforms might choose a different + * regulators than the one used to characterize the algorithms + * (ie, init_voltage_step). + */ + fdata->min_uV = roundup(fdata->min_uV, step_volt); + fdata->max_uV = roundup(fdata->max_uV, step_volt); + + fuse_corner->min_uV = fdata->min_uV; + fuse_corner->max_uV = fdata->max_uV; + fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV); + + /* Populate target quotient by scaling */ + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot); + if (ret) + return ret; + + fuse_corner->quot *= fdata->quot_scale; + fuse_corner->quot += fdata->quot_offset; + fuse_corner->quot += fdata->quot_adjust; + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_fuse_common); + +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners) +{ + unsigned long rate; + struct corner *iter, *corner; + const struct corner *end; + unsigned int i = 0; + + if (!cpu_clk) { + dev_err(dev, "cannot get rate from NULL clk\n"); + return -EINVAL; + } + + end = &corners[num_corners - 1]; + rate = clk_get_rate(cpu_clk); + + /* + * Some bootloaders set a CPU clock frequency that is not defined + * in the OPP table. When running at an unlisted frequency, + * cpufreq_online() will change to the OPP which has the lowest + * frequency, at or above the unlisted frequency. + * Since cpufreq_online() always "rounds up" in the case of an + * unlisted frequency, this function always "rounds down" in case + * of an unlisted frequency. That way, when cpufreq_online() + * triggers the first ever call to cpr_set_performance_state(), + * it will correctly determine the direction as UP. + */ + for (iter = corners; iter <= end; iter++) { + if (iter->freq > rate) + break; + i++; + if (iter->freq == rate) { + corner = iter; + break; + } + if (iter->freq < rate) + corner = iter; + } + + if (!corner) { + dev_err(dev, "boot up corner not found\n"); + return -EINVAL; + } + + dev_dbg(dev, "boot up perf state: %u\n", i); + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_find_initial_corner); + +unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) +{ + struct device_node *np; + unsigned int fuse_corner = 0; + + np = dev_pm_opp_get_of_node(opp); + if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) + pr_err("%s: missing 'qcom,opp-fuse-level' property\n", + __func__); + + of_node_put(np); + + return fuse_corner; +} +EXPORT_SYMBOL_GPL(cpr_get_fuse_corner); + +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev) +{ + u64 rate = 0; + struct device_node *ref_np; + struct device_node *desc_np; + struct device_node *child_np = NULL; + struct device_node *child_req_np = NULL; + + desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!desc_np) + return 0; + + ref_np = dev_pm_opp_get_of_node(ref); + if (!ref_np) + goto out_ref; + + do { + of_node_put(child_req_np); + child_np = of_get_next_available_child(desc_np, child_np); + child_req_np = of_parse_phandle(child_np, "required-opps", 0); + } while (child_np && child_req_np != ref_np); + + if (child_np && child_req_np == ref_np) + of_property_read_u64(child_np, "opp-hz", &rate); + + of_node_put(child_req_np); + of_node_put(child_np); + of_node_put(ref_np); +out_ref: + of_node_put(desc_np); + + return (unsigned long) rate; +} +EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req); + +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner) +{ + u32 quot_diff = 0; + unsigned long freq_diff; + int scaling; + const struct fuse_corner *fuse, *prev_fuse; + int ret; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + if (quot_offset) { + ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, "_diff); + if (ret) + return ret; + + quot_diff *= fdata->quot_offset_scale; + quot_diff += fdata->quot_offset_adjust; + } else { + quot_diff = fuse->quot - prev_fuse->quot; + } + + freq_diff = fuse->max_freq - prev_fuse->max_freq; + freq_diff /= 1000000; /* Convert to MHz */ + scaling = 1000 * quot_diff / freq_diff; + return min(scaling, fdata->max_quot_scale); +} +EXPORT_SYMBOL_GPL(cpr_calculate_scaling); + +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata) +{ + unsigned long f_high, f_low, f_diff; + int uV_high, uV_low, uV; + u64 temp, temp_limit; + const struct fuse_corner *fuse, *prev_fuse; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + f_high = fuse->max_freq; + f_low = prev_fuse->max_freq; + uV_high = fuse->uV; + uV_low = prev_fuse->uV; + f_diff = fuse->max_freq - corner->freq; + + /* + * Don't interpolate in the wrong direction. This could happen + * if the adjusted fuse voltage overlaps with the previous fuse's + * adjusted voltage. + */ + if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) + return corner->uV; + + temp = f_diff * (uV_high - uV_low); + temp = div64_ul(temp, f_high - f_low); + + /* + * max_volt_scale has units of uV/MHz while freq values + * have units of Hz. Divide by 1000000 to convert to. + */ + temp_limit = f_diff * fdata->max_volt_scale; + do_div(temp_limit, 1000000); + + uV = uV_high - min(temp, temp_limit); + return roundup(uV, step_volt); +} +EXPORT_SYMBOL_GPL(cpr_interpolate); + +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f) +{ + int ret; + + ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV); + if (!ret) { + dev_err(dev, "min uV: %d not supported by regulator\n", + f->min_uV); + return -EINVAL; + } + + ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV); + if (!ret) { + dev_err(dev, "max uV: %d not supported by regulator\n", + f->max_uV); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints); + +MODULE_DESCRIPTION("Core Power Reduction (CPR) common"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pmdomain/qcom/cpr-common.h b/drivers/pmdomain/qcom/cpr-common.h new file mode 100644 index 000000000000..1f2ebf9394cf --- /dev/null +++ b/drivers/pmdomain/qcom/cpr-common.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include +#include + +enum voltage_change_dir { + NO_CHANGE, + DOWN, + UP, +}; + +struct cpr_fuse { + char *ring_osc; + char *init_voltage; + char *quotient; + char *quotient_offset; +}; + +struct fuse_corner_data { + int ref_uV; + int max_uV; + int min_uV; + int max_volt_scale; + int max_quot_scale; + /* fuse quot */ + int quot_offset; + int quot_scale; + int quot_adjust; + /* fuse quot_offset */ + int quot_offset_scale; + int quot_offset_adjust; +}; + +struct fuse_corner { + int min_uV; + int max_uV; + int uV; + int quot; + int step_quot; + const struct reg_sequence *accs; + int num_accs; + unsigned long max_freq; + u8 ring_osc_idx; +}; + +struct corner { + int min_uV; + int max_uV; + int uV; + int last_uV; + int quot_adjust; + u32 save_ctl; + u32 save_irq; + unsigned long freq; + struct fuse_corner *fuse_corner; +}; + +struct corner_data { + unsigned int fuse_corner; + unsigned long freq; +}; + +struct acc_desc { + unsigned int enable_reg; + u32 enable_mask; + + struct reg_sequence *config; + struct reg_sequence *settings; + int num_regs_per_fuse; +}; + +struct cpr_acc_desc { + const struct cpr_desc *cpr_desc; + const struct acc_desc *acc_desc; +}; + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners); +const struct cpr_fuse *cpr_get_fuses(struct device *dev, + unsigned int num_fuse_corners); +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step); +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev); +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner); +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata); +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f); diff --git a/drivers/pmdomain/qcom/cpr.c b/drivers/pmdomain/qcom/cpr.c index c64e84a27cc7..5c83f0c26b29 100644 --- a/drivers/pmdomain/qcom/cpr.c +++ b/drivers/pmdomain/qcom/cpr.c @@ -25,6 +25,8 @@ #include #include +#include "cpr-common.h" + /* Register Offsets for RB-CPR and Bit Definitions */ /* RBCPR Version Register */ @@ -123,45 +125,12 @@ #define FUSE_REVISION_UNKNOWN (-1) -enum voltage_change_dir { - NO_CHANGE, - DOWN, - UP, -}; - -struct cpr_fuse { - char *ring_osc; - char *init_voltage; - char *quotient; - char *quotient_offset; -}; - -struct fuse_corner_data { - int ref_uV; - int max_uV; - int min_uV; - int max_volt_scale; - int max_quot_scale; - /* fuse quot */ - int quot_offset; - int quot_scale; - int quot_adjust; - /* fuse quot_offset */ - int quot_offset_scale; - int quot_offset_adjust; -}; - struct cpr_fuses { int init_voltage_step; int init_voltage_width; struct fuse_corner_data *fuse_corner_data; }; -struct corner_data { - unsigned int fuse_corner; - unsigned long freq; -}; - struct cpr_desc { unsigned int num_fuse_corners; int min_diff_quot; @@ -183,44 +152,6 @@ struct cpr_desc { bool reduce_to_corner_uV; }; -struct acc_desc { - unsigned int enable_reg; - u32 enable_mask; - - struct reg_sequence *config; - struct reg_sequence *settings; - int num_regs_per_fuse; -}; - -struct cpr_acc_desc { - const struct cpr_desc *cpr_desc; - const struct acc_desc *acc_desc; -}; - -struct fuse_corner { - int min_uV; - int max_uV; - int uV; - int quot; - int step_quot; - const struct reg_sequence *accs; - int num_accs; - unsigned long max_freq; - u8 ring_osc_idx; -}; - -struct corner { - int min_uV; - int max_uV; - int uV; - int last_uV; - int quot_adjust; - u32 save_ctl; - u32 save_irq; - unsigned long freq; - struct fuse_corner *fuse_corner; -}; - struct cpr_drv { unsigned int num_corners; unsigned int ref_clk_khz; @@ -800,50 +731,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain, return ret; } -static int -cpr_populate_ring_osc_idx(struct cpr_drv *drv) -{ - struct fuse_corner *fuse = drv->fuse_corners; - struct fuse_corner *end = fuse + drv->desc->num_fuse_corners; - const struct cpr_fuse *fuses = drv->cpr_fuses; - u32 data; - int ret; - - for (; fuse < end; fuse++, fuses++) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data); - if (ret) - return ret; - fuse->ring_osc_idx = data; - } - - return 0; -} - -static int cpr_read_fuse_uV(const struct cpr_desc *desc, - const struct fuse_corner_data *fdata, - const char *init_v_efuse, - int step_volt, - struct cpr_drv *drv) -{ - int step_size_uV, steps, uV; - u32 bits = 0; - int ret; - - ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits); - if (ret) - return ret; - - steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1); - /* Not two's complement.. instead highest bit is sign bit */ - if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1)) - steps = -steps; - - step_size_uV = desc->cpr_fuses.init_voltage_step; - - uV = fdata->ref_uV + steps * step_size_uV; - return DIV_ROUND_UP(uV, step_volt) * step_volt; -} - static int cpr_fuse_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -853,7 +740,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) unsigned int step_volt; struct fuse_corner_data *fdata; struct fuse_corner *fuse, *end; - int uV; const struct reg_sequence *accs; int ret; @@ -869,23 +755,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) fdata = desc->cpr_fuses.fuse_corner_data; for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) { - /* - * Update SoC voltages: platforms might choose a different - * regulators than the one used to characterize the algorithms - * (ie, init_voltage_step). - */ - fdata->min_uV = roundup(fdata->min_uV, step_volt); - fdata->max_uV = roundup(fdata->max_uV, step_volt); + ret = cpr_populate_fuse_common(drv->dev, fdata, fuses, + fuse, step_volt, + desc->cpr_fuses.init_voltage_width, + desc->cpr_fuses.init_voltage_step); + if (ret) + return ret; - /* Populate uV */ - uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage, - step_volt, drv); - if (uV < 0) - return uV; - fuse->min_uV = fdata->min_uV; - fuse->max_uV = fdata->max_uV; - fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV); + fuse->step_quot = desc->step_quot[fuse->ring_osc_idx]; if (fuse == end) { /* @@ -923,25 +801,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) else if (fuse->uV < fuse->min_uV) fuse->uV = fuse->min_uV; - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->min_uV, - fuse->min_uV); - if (!ret) { - dev_err(drv->dev, - "min uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->min_uV, i); - return -EINVAL; - } - - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->max_uV, - fuse->max_uV); - if (!ret) { - dev_err(drv->dev, - "max uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->max_uV, i); - return -EINVAL; - } + ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse); + if (ret) + return ret; dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n", @@ -952,126 +814,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) return 0; } -static int cpr_calculate_scaling(const char *quot_offset, - struct cpr_drv *drv, - const struct fuse_corner_data *fdata, - const struct corner *corner) -{ - u32 quot_diff = 0; - unsigned long freq_diff; - int scaling; - const struct fuse_corner *fuse, *prev_fuse; - int ret; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - if (quot_offset) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, "_diff); - if (ret) - return ret; - - quot_diff *= fdata->quot_offset_scale; - quot_diff += fdata->quot_offset_adjust; - } else { - quot_diff = fuse->quot - prev_fuse->quot; - } - - freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; - return min(scaling, fdata->max_quot_scale); -} - -static int cpr_interpolate(const struct corner *corner, int step_volt, - const struct fuse_corner_data *fdata) -{ - unsigned long f_high, f_low, f_diff; - int uV_high, uV_low, uV; - u64 temp, temp_limit; - const struct fuse_corner *fuse, *prev_fuse; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - f_high = fuse->max_freq; - f_low = prev_fuse->max_freq; - uV_high = fuse->uV; - uV_low = prev_fuse->uV; - f_diff = fuse->max_freq - corner->freq; - - /* - * Don't interpolate in the wrong direction. This could happen - * if the adjusted fuse voltage overlaps with the previous fuse's - * adjusted voltage. - */ - if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) - return corner->uV; - - temp = f_diff * (uV_high - uV_low); - temp = div64_ul(temp, f_high - f_low); - - /* - * max_volt_scale has units of uV/MHz while freq values - * have units of Hz. Divide by 1000000 to convert to. - */ - temp_limit = f_diff * fdata->max_volt_scale; - do_div(temp_limit, 1000000); - - uV = uV_high - min(temp, temp_limit); - return roundup(uV, step_volt); -} - -static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) -{ - struct device_node *np; - unsigned int fuse_corner = 0; - - np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); - - of_node_put(np); - - return fuse_corner; -} - -static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev) -{ - u64 rate = 0; - struct device_node *ref_np; - struct device_node *desc_np; - struct device_node *child_np = NULL; - struct device_node *child_req_np = NULL; - - desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (!desc_np) - return 0; - - ref_np = dev_pm_opp_get_of_node(ref); - if (!ref_np) - goto out_ref; - - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); - child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); - - of_node_put(child_req_np); - of_node_put(child_np); - of_node_put(ref_np); -out_ref: - of_node_put(desc_np); - - return (unsigned long) rate; -} - static int cpr_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -1185,7 +927,7 @@ static int cpr_corner_init(struct cpr_drv *drv) corner->uV = fuse->uV; if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) { - scaling = cpr_calculate_scaling(quot_offset, drv, + scaling = cpr_calculate_scaling(drv->dev, quot_offset, fdata, corner); if (scaling < 0) return scaling; @@ -1223,47 +965,6 @@ static int cpr_corner_init(struct cpr_drv *drv) return 0; } -static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv) -{ - const struct cpr_desc *desc = drv->desc; - struct cpr_fuse *fuses; - int i; - - fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners, - sizeof(struct cpr_fuse), - GFP_KERNEL); - if (!fuses) - return ERR_PTR(-ENOMEM); - - for (i = 0; i < desc->num_fuse_corners; i++) { - char tbuf[32]; - - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); - fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].ring_osc) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); - fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].init_voltage) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); - fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].quotient) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); - fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].quotient_offset) - return ERR_PTR(-ENOMEM); - } - - return fuses; -} - static void cpr_set_loop_allowed(struct cpr_drv *drv) { drv->loop_disabled = false; @@ -1295,54 +996,6 @@ static int cpr_init_parameters(struct cpr_drv *drv) return 0; } -static int cpr_find_initial_corner(struct cpr_drv *drv) -{ - unsigned long rate; - const struct corner *end; - struct corner *iter; - unsigned int i = 0; - - if (!drv->cpu_clk) { - dev_err(drv->dev, "cannot get rate from NULL clk\n"); - return -EINVAL; - } - - end = &drv->corners[drv->num_corners - 1]; - rate = clk_get_rate(drv->cpu_clk); - - /* - * Some bootloaders set a CPU clock frequency that is not defined - * in the OPP table. When running at an unlisted frequency, - * cpufreq_online() will change to the OPP which has the lowest - * frequency, at or above the unlisted frequency. - * Since cpufreq_online() always "rounds up" in the case of an - * unlisted frequency, this function always "rounds down" in case - * of an unlisted frequency. That way, when cpufreq_online() - * triggers the first ever call to cpr_set_performance_state(), - * it will correctly determine the direction as UP. - */ - for (iter = drv->corners; iter <= end; iter++) { - if (iter->freq > rate) - break; - i++; - if (iter->freq == rate) { - drv->corner = iter; - break; - } - if (iter->freq < rate) - drv->corner = iter; - } - - if (!drv->corner) { - dev_err(drv->dev, "boot up corner not found\n"); - return -EINVAL; - } - - dev_dbg(drv->dev, "boot up perf state: %u\n", i); - - return 0; -} - static const struct cpr_desc qcs404_cpr_desc = { .num_fuse_corners = 3, .min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF, @@ -1524,7 +1177,8 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, if (ret) goto unlock; - ret = cpr_find_initial_corner(drv); + ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners, + drv->num_corners); if (ret) goto unlock; @@ -1609,6 +1263,7 @@ static int cpr_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct cpr_drv *drv; + const struct cpr_desc *desc; int irq, ret; const struct cpr_acc_desc *data; struct device_node *np; @@ -1624,6 +1279,7 @@ static int cpr_probe(struct platform_device *pdev) drv->dev = dev; drv->desc = data->cpr_desc; drv->acc_desc = data->acc_desc; + desc = drv->desc; drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners, sizeof(*drv->fuse_corners), @@ -1663,11 +1319,13 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv); + drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); - ret = cpr_populate_ring_osc_idx(drv); + ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners, + drv->cpr_fuses, + desc->num_fuse_corners); if (ret) return ret; From patchwork Mon Jul 8 12:22:37 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726576 Received: from mail-ej1-f53.google.com (mail-ej1-f53.google.com [209.85.218.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1B773136E30 for ; Mon, 8 Jul 2024 12:23:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.53 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441393; cv=none; b=f49HrHTrrVr67ztoL3JDdMcLR1GxDeM9iGkVhqn4VSt0HKAjD07drbO7nDlYRFkyyFv4+TrA7dVeMpKVVwiN6+6M5M6BLGP9f/RbpVm12ykB8NRQ4zaAB/Pqi77cLA0C/k7yfAvfWC2yvLwAb/ITnaruymzgELKtOH2Qoh4G2gI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441393; c=relaxed/simple; bh=lFhFm8XkOz5Bskd3D5+xaH3dSN5OhtVheagJNvAQMPQ=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=RJbIBB0viJ8oaWngVxZtjx0D2t/i96n5Ran+Sv/bnshU9xjC54VcxIq4IXzToag5OvYc2T26KfwHxpYk3FbU4/opGWhklBTRB2Rgatnz1ZdX+5+zSOQk2h50zpaWKsBwHTjp7TBBaeRrKCDYa2uez7TQhg5F1u9kZ3FsiGhadps= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=ExEiBYs5; arc=none smtp.client-ip=209.85.218.53 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="ExEiBYs5" Received: by mail-ej1-f53.google.com with SMTP id a640c23a62f3a-a689ad8d1f6so414816566b.2 for ; Mon, 08 Jul 2024 05:23:11 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441390; x=1721046190; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=G1uTwXH469EZcpo+8MN3uCbZzqBdHjB+YY0ngrC8PfI=; b=ExEiBYs5gOA+1F78aNQih8+kOiJjznrm29dTDmYneXcDG/QGJbhexi2eEumI+vn447 o6cWOBn9O2vXgTLrgp5NGCaeimlPnK21hatWSZaB/5RpbgGNwq3vyBstLTTJGqgbD/1G Zti9YIeM1E/IXNETxKu88ha+zU63mt0Pq/V+yj+UjW+BCqc7FRte9qDLlsnsOh24fmKm lg7lt5aPad/siS44zja0JaUdjp0FBBdEcLgsx7Q4uonW67/Liie4qWbl9SX5pye1Fe6c ZiYzCZXDLTueC0pZA1U1curYXti1AgdubAPm7O4G56eqo5oR25dUIvYWLzafguC++83N 5PxA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441390; x=1721046190; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=G1uTwXH469EZcpo+8MN3uCbZzqBdHjB+YY0ngrC8PfI=; b=HY1vEn1akmzA+YSDMYpL7QbMdu4QA4638COJBkQrxFEs1A0kg8zG8zf68saf4Ed2PT vuhrcsHTd5pvBNosobdQNbB1IlOcMs2+xjhWgZ5pMupIR/IS/W8C66QyId0ei3vwa+8P qs+SuN+I8MZ1OfDQ+u0BWAzvRQfxDmBggsnXrBwoafLNgfMfAwmq0zohAH2kRIIP9MDa wca13ZteVg6RXLA57aIZPsPRC2Dn4AM4BFpENSSsApfa5gryIV9N89Km7w9Y5Sjkr9lh IWtxttMvgqVC2sXGc7YUnd20CCkiUhYDEgxwmlZcLFYUjSO2DTg3smXLDP8wO/QAoqO2 pzIg== X-Forwarded-Encrypted: i=1; AJvYcCXW0xH7LBIVPFtZAQZ9BrHhZNSNmlIVybyZDM6o/JTUOwuK/QoWWuSVcWp4VqpMGwqqREHSfk6+8MfjAgeOh76+ZRedpddpDrvX8kmEQQ== X-Gm-Message-State: AOJu0YxoTSy3Ba+snuxywDNQFe7m6bgRWP5oQyfUhJAKDCT17BrUsQJb yCFuGvOGfL0/hRksBrph0q+4VbTRLm9RkeSrmcKPqW36JgDE6Jo5oLyLjakyTts= X-Google-Smtp-Source: AGHT+IEzrIE8nTDCnmlFyNmQLCQDmburyEgzq+VfZPoE2qFHfdKrbEcZLGwxoqFHstrY2KSjFmvBDg== X-Received: by 2002:a17:907:7212:b0:a77:cf9d:f498 with SMTP id a640c23a62f3a-a77cf9df683mr672501166b.40.1720441390300; Mon, 08 Jul 2024 05:23:10 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:10 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:37 +0200 Subject: [PATCH v15 06/10] soc: qcom: cpr-common: Add support for flat fuse adjustment Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-6-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=2082; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=FEkMInUlFGjcpdQZXJiXJbXnI1fSzwAHTqwD5lohyQc=; b=NK+iXcizWrvtLUoUHu/vS0S0kTwc1u4mGLBKv+flCXlPGC3SJ5V91qAvPd1I7NOa5WZEltNRB zQe4a73aENsAHL/qm2+6U71S9C0Oqb7IKxclklhO20xqMzrg8/TpLad X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno CPR3 makes use of post-calculation flat value adjustments. Add the necessary bits to the common functions to support it. Signed-off-by: AngeloGioacchino Del Regno [Konrad: separate this patch out of a bigger one] Signed-off-by: Konrad Dybcio --- drivers/pmdomain/qcom/cpr-common.c | 9 ++++++--- drivers/pmdomain/qcom/cpr-common.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/pmdomain/qcom/cpr-common.c b/drivers/pmdomain/qcom/cpr-common.c index ea85f6b4bef8..44c681bbbf13 100644 --- a/drivers/pmdomain/qcom/cpr-common.c +++ b/drivers/pmdomain/qcom/cpr-common.c @@ -49,7 +49,7 @@ int cpr_populate_ring_osc_idx(struct device *dev, EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx); static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, - int step_volt, const char *init_v_efuse, + int adj, int step_volt, const char *init_v_efuse, struct device *dev) { int steps, uV; @@ -67,6 +67,9 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, uV = ref_uV + steps * step_size_uV; + /* Apply open-loop fixed adjustments to fused values */ + uV += adj; + return DIV_ROUND_UP(uV, step_volt) * step_volt; } @@ -119,8 +122,8 @@ int cpr_populate_fuse_common(struct device *dev, /* Populate uV */ uV = cpr_read_fuse_uV(init_v_width, init_v_step, - fdata->ref_uV, step_volt, - cpr_fuse->init_voltage, dev); + fdata->ref_uV, fdata->volt_oloop_adjust, + step_volt, cpr_fuse->init_voltage, dev); if (uV < 0) return uV; diff --git a/drivers/pmdomain/qcom/cpr-common.h b/drivers/pmdomain/qcom/cpr-common.h index 1f2ebf9394cf..0aa227617d2f 100644 --- a/drivers/pmdomain/qcom/cpr-common.h +++ b/drivers/pmdomain/qcom/cpr-common.h @@ -22,6 +22,7 @@ struct fuse_corner_data { int ref_uV; int max_uV; int min_uV; + int volt_oloop_adjust; int max_volt_scale; int max_quot_scale; /* fuse quot */ From patchwork Mon Jul 8 12:22:38 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726577 Received: from mail-ej1-f50.google.com (mail-ej1-f50.google.com [209.85.218.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 887A113A87E for ; Mon, 8 Jul 2024 12:23:14 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.50 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441396; cv=none; b=Djt2ng2Hr0nJ8C4x5oAdC+pwQioyXpHsX4Ef4LVBngH3DHDf6vu086mHLZ10dX+MecTa/6ZazFfERJAXjcAzHvPtRT7d4xcSlcMuta8bLS2f6iVUeolg5yOZGaiN2gEVqt+ZG5g8NGspi5bOALRQfkny5GNegeYM5vUUZ0tr0G4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441396; c=relaxed/simple; bh=S4/6dqVzCQ55H+jEzo18/eSt3/yhBjBw+Vgvf5+K9HA=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=IfF9VXQ0yNnn3A7xXyPOCmVOoMWOIvKTViaJwmEO9Fztdqh3Aj06uGTpvg5M7tFS/16OpSGWMVBZBUKsMyhlmH8Eejb0lb0oKhD7q14eW4K1+8Io2FhhtK534EzBkkGoe4Ya1d0nFd3Lnd3bhTOmj+JI87icnCqtWVhUBwsEnSo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=hi7/S844; arc=none smtp.client-ip=209.85.218.50 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="hi7/S844" Received: by mail-ej1-f50.google.com with SMTP id a640c23a62f3a-a7527afa23cso478279866b.2 for ; Mon, 08 Jul 2024 05:23:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441393; x=1721046193; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=JS6pi0mbZ0HVf65HjWjlZ5m8NQ5AsGtLpzqZjXxkjCQ=; b=hi7/S8443ET0GeYaRrO34NlP7gPKm8FIxVbGmOSki0bNdU5gQEa7r2Boo1hAiHDGK8 ihu/XLIkF9gSoEFreor/C0dX4TNaQ2kjVisiGoEgIbWNPizaAOrn7DqaadmMsWWYdOVC 7JSvn66BZnSvv6PxzaKls8Go8bZdn+fx/4aN+Rm0DJ8JKgU++2LC9eIGCDlL9hsJHvzw DBjA1m4amhIIBWUB0qjtwga7pWd8NijWC/WXIjIBG+ixh7n3ZIYnYlcaJoH7ykeoY+O1 K2uo2/k4jRjspaby15RXl2/LNxTuBr47fSzlukoVKvHjE88Iz+bM8t836F0LLWgWRWNG waWg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441393; x=1721046193; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=JS6pi0mbZ0HVf65HjWjlZ5m8NQ5AsGtLpzqZjXxkjCQ=; b=aXOGTD5k71TrEQA4Rg5Khz6Sbkk/EG+TbC/7wxCc/QdWEyfvhcJSaWsltQdtpuBrRX jTygsZQc1Ay7JQBOXyyK30cvFSVttuz6SGcauoLmuFXlaQdGwVoCMdXZj5GyylRGfHzw jy6Jnk9dxJ069mQ/RcM+HxbIi4aGN12blmqtNR39rMH6niQqPB1/LinhEp02unUFWsu2 jt9GL/izqDpQnGOyIWOMVfiOB5V/PxbmQNfVZ8dEF3lf6oSXL4fieWO1TdN8DjOVpVKm GryMAaqQX2VUn1RBGzbZ8L6r1zal8ufOX0FAmk/PrDAljEoZdnlDx4YogLeWeTY/hIgS Z7kg== X-Forwarded-Encrypted: i=1; AJvYcCUhAQAX0nX4DUmC4cOu2FaBJpnF2NmBdbKndbb7fIVPNJ3lL+lp0WeRa5jy9k2lbCIIIGresoXlihZYx1KvBxgIHjj7GdsAm4IZEMHfgg== X-Gm-Message-State: AOJu0Ywmp2+hr56sf24Hy2BJLtAq0n0uKeOZaKmteUlDPaA3A3iaASaU P73u7CkyvGL/y1VSIySAKBuuVc40m64+vack/NaN+uAuZLng5sVTt0GeqkMiaBI= X-Google-Smtp-Source: AGHT+IEqCM5zd4aXRr5or3PDC2PLi11dRi2QzgmCl8YdBcyy4aTB4fLnWFVBxZOXWniNk5yrvjX17g== X-Received: by 2002:a17:906:24ce:b0:a77:e1fb:7df4 with SMTP id a640c23a62f3a-a77e1fb7f9cmr411901866b.13.1720441392984; Mon, 08 Jul 2024 05:23:12 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.10 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:12 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:38 +0200 Subject: [PATCH v15 07/10] soc: qcom: cpr: Use u64 for frequency Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-7-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=4791; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=S4/6dqVzCQ55H+jEzo18/eSt3/yhBjBw+Vgvf5+K9HA=; b=JNg8MhX1IceKVwxNHOoyy/y2U2abJGJALs6cO2umKguYPDeKiU5SIgPNlLiFqqrhT+D8Q5X0S YUib4hKDlVUB3JPKtjezGFNVSiTsbqXuj8tonaXAcrQaYCfFnPtDSX2 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= 32 bits is not enough for over-2.changeGHz frequencies. Move all variables that operate on Hz to u64 to avoid overflows. Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Konrad Dybcio --- drivers/pmdomain/qcom/cpr-common.c | 13 +++++++------ drivers/pmdomain/qcom/cpr-common.h | 9 ++++----- drivers/pmdomain/qcom/cpr.c | 8 ++++---- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/pmdomain/qcom/cpr-common.c b/drivers/pmdomain/qcom/cpr-common.c index 44c681bbbf13..3e3a4a61cfde 100644 --- a/drivers/pmdomain/qcom/cpr-common.c +++ b/drivers/pmdomain/qcom/cpr-common.c @@ -218,7 +218,7 @@ unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) } EXPORT_SYMBOL_GPL(cpr_get_fuse_corner); -unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, +u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev) { u64 rate = 0; @@ -250,7 +250,7 @@ unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, out_ref: of_node_put(desc_np); - return (unsigned long) rate; + return rate; } EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req); @@ -260,7 +260,7 @@ int cpr_calculate_scaling(struct device *dev, const struct corner *corner) { u32 quot_diff = 0; - unsigned long freq_diff; + u64 freq_diff; int scaling; const struct fuse_corner *fuse, *prev_fuse; int ret; @@ -280,8 +280,9 @@ int cpr_calculate_scaling(struct device *dev, } freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; + freq_diff = div_u64(freq_diff, 1000000); /* Convert to MHz */ + scaling = 1000 * quot_diff; + do_div(scaling, freq_diff); return min(scaling, fdata->max_quot_scale); } EXPORT_SYMBOL_GPL(cpr_calculate_scaling); @@ -289,7 +290,7 @@ EXPORT_SYMBOL_GPL(cpr_calculate_scaling); int cpr_interpolate(const struct corner *corner, int step_volt, const struct fuse_corner_data *fdata) { - unsigned long f_high, f_low, f_diff; + u64 f_high, f_low, f_diff; int uV_high, uV_low, uV; u64 temp, temp_limit; const struct fuse_corner *fuse, *prev_fuse; diff --git a/drivers/pmdomain/qcom/cpr-common.h b/drivers/pmdomain/qcom/cpr-common.h index 0aa227617d2f..1b2fa344eb09 100644 --- a/drivers/pmdomain/qcom/cpr-common.h +++ b/drivers/pmdomain/qcom/cpr-common.h @@ -42,7 +42,7 @@ struct fuse_corner { int step_quot; const struct reg_sequence *accs; int num_accs; - unsigned long max_freq; + u64 max_freq; u8 ring_osc_idx; }; @@ -54,13 +54,13 @@ struct corner { int quot_adjust; u32 save_ctl; u32 save_irq; - unsigned long freq; + u64 freq; struct fuse_corner *fuse_corner; }; struct corner_data { unsigned int fuse_corner; - unsigned long freq; + u64 freq; }; struct acc_desc { @@ -92,8 +92,7 @@ int cpr_populate_fuse_common(struct device *dev, int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, struct corner *corners, int num_corners); u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); -unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev); +u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev); int cpr_calculate_scaling(struct device *dev, const char *quot_offset, const struct fuse_corner_data *fdata, diff --git a/drivers/pmdomain/qcom/cpr.c b/drivers/pmdomain/qcom/cpr.c index 5c83f0c26b29..b2e6e6eaae73 100644 --- a/drivers/pmdomain/qcom/cpr.c +++ b/drivers/pmdomain/qcom/cpr.c @@ -826,8 +826,8 @@ static int cpr_corner_init(struct cpr_drv *drv) struct corner_data *cdata; const struct fuse_corner_data *fdata; bool apply_scaling; - unsigned long freq_diff, freq_diff_mhz; - unsigned long freq; + unsigned long freq_diff_mhz; + u64 freq, freq_diff; int step_volt = regulator_get_linear_step(drv->vdd_apc); struct dev_pm_opp *opp; @@ -866,7 +866,7 @@ static int cpr_corner_init(struct cpr_drv *drv) cdata[level - 1].freq = freq; fuse = &drv->fuse_corners[fnum]; - dev_dbg(drv->dev, "freq: %lu level: %u fuse level: %u\n", + dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n", freq, dev_pm_opp_get_level(opp) - 1, fnum); if (freq > fuse->max_freq) fuse->max_freq = freq; @@ -940,7 +940,7 @@ static int cpr_corner_init(struct cpr_drv *drv) if (apply_scaling) { freq_diff = fuse->max_freq - corner->freq; - freq_diff_mhz = freq_diff / 1000000; + freq_diff_mhz = (u32)div_u64(freq_diff, 1000000); corner->quot_adjust = scaling * freq_diff_mhz / 1000; corner->uV = cpr_interpolate(corner, step_volt, fdata); From patchwork Mon Jul 8 12:22:39 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726578 Received: from mail-ej1-f43.google.com (mail-ej1-f43.google.com [209.85.218.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C15A713B792 for ; Mon, 8 Jul 2024 12:23:16 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.43 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441399; cv=none; b=PdtQFYD0IFblePbeaCxRaNVaXcYGZaCsONx4K7HjZunTkiEVOwApJpu60ZZxsxSChfwZXfvURqQ0lcSQuVhUhXq3omqMivGU0h7vCsRElohBgqo7AC9G8AmKiE1NUJyXFbRYIvxKWqNzcURqiWQMGmwIVZ8B0Q7mt4aJhbaEo8g= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441399; c=relaxed/simple; bh=4GFe15MMplZISD2mRKRIGTrlhVdPcnPi6hg96zSRZoE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=PmfqI2OtZpQ+N6j77hwyKC47R6/+f/7Y+wgvzpGZDMzdPCkhIwDr3d0KuLhCyA8NADUiE30DuMnv17moLnB9cZ1iJYk2+Tbb4OGez795tDaLl+Wb4saLg+HhxjOnsj30ZxfuMUgl2mm8GtwFTHZsuHPP8Tff4F4AQi2mRbYziq4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=VOjJDF8o; arc=none smtp.client-ip=209.85.218.43 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="VOjJDF8o" Received: by mail-ej1-f43.google.com with SMTP id a640c23a62f3a-a77c9d3e593so311424166b.0 for ; Mon, 08 Jul 2024 05:23:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441395; x=1721046195; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=sMYtsmrWmpra2TO4Mu5yog2tiXr5havv6xPG/BMSews=; b=VOjJDF8oVeWEqDMzQgH/Vm+Ou1vimSrehjCQKdV+j/LzzwGTDx9C2OJO6nhpQ17y4Z 6eRDmlFDp2zvS1gNdCgCpw8pr7j2DS1TL83NVUV4ySMFp7xssxnTpSt702v6QQ02rFoG hN9LeoqL/h5fA9pwVc97zmrpCeSAC0a/ImK5Y3YFiBZ3gfWUdI/pLRL3qhC3DPCfuFRq m+rylCxwV7Obciki2FhiuyNaT92s3eZo8aEOxesK/R4xcmcBQ7q0mxosZkBHn0WIgl64 HOMJLSjQa9a7jKNNN7tjbO9DMRgdTQMyaOLSJ9V4WBEGE9frx/YroCfKDRxBnpotTUSm 2xnQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441395; x=1721046195; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=sMYtsmrWmpra2TO4Mu5yog2tiXr5havv6xPG/BMSews=; b=FloCirNeh2CKNuClVW8pzEvw8CDssJvnu1/+h3Yk0YFs8R/j2y0EmD2I7dRHJsHfLA 0dxN3JIHa92XhlHO3CT4eKENLgLpKuoEC1eTltdJVMaZEydMch7Q152Tj1BR0KsaXcmQ LLHnAIcACRCRrXu0klGGV0S458uQA+cHT0hYQd++aDN9E+U6V6yQfcNhwwH1gGG4Kskz tv/7jclz1U/cZOZkj18GyiYpr9/AZlmW4/VHlwT3P2IAPM7MLMHKZs7pSqfwNjhtfIcN syHdP/ODrqk/0l/bOR17Psyq5q0nQ7T9yJe3T0N40aPj6qPAtc3MTYNcYowQ2WhwH/Ih wnPQ== X-Forwarded-Encrypted: i=1; AJvYcCWY/ldU/kUZ3tyxFCyaAz2amEqZcWchsMdkxTD5OlGpM07e7uNvqtqB7U5r30ha7hpY7h+INboJaUQqzlESY1UuyckZBzctdOI6/4X69A== X-Gm-Message-State: AOJu0YyQdQrNwfwNtfld1AfTMspCO7de+aUb/FF8Ms6DL6eyWB/G2TNN DEWShPtUa5U4Ywl2+WaNbbNic2DG8X6jwE1PU0WUZZiPZ7nD1emVi2lVyZknjps= X-Google-Smtp-Source: AGHT+IEQaZ79JDmlucwfNuLT9gh+vSxm1knKqmZGZ2z3D+cWhJoBD0Auw9q3oQRpPHMtRiPG371X4A== X-Received: by 2002:a17:907:3f8b:b0:a72:8fc7:ef7f with SMTP id a640c23a62f3a-a77ba72c6camr845528366b.65.1720441395134; Mon, 08 Jul 2024 05:23:15 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:14 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:39 +0200 Subject: [PATCH v15 08/10] soc: qcom: cpr-common: Add threads support Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-8-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=6371; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=R3yGeSgRjC51yaphFTSAoby0H8mBl+gtp/QxV8bmOsY=; b=A+jP0/5BMkKY8RDg2GPX0zR6ICkcO7W5/MFwC85A3taeme0Zan2dFEccMJ5Rgq34Z0gvSgB97 yskZLO8DsIYDqdAdHHr6Cjg8RvSAYuDic9iRvbtFnokuEX7fwwYsBAn X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno Add support for parsing per-CPR-thread data in preparation for introducing CPR3+ support. Signed-off-by: AngeloGioacchino Del Regno [Konrad: separate this patch out of a bigger one] Signed-off-by: Konrad Dybcio --- drivers/pmdomain/qcom/cpr-common.c | 42 +++++++++++++++++++++++--------------- drivers/pmdomain/qcom/cpr-common.h | 8 ++++++-- drivers/pmdomain/qcom/cpr.c | 4 ++-- 3 files changed, 33 insertions(+), 21 deletions(-) diff --git a/drivers/pmdomain/qcom/cpr-common.c b/drivers/pmdomain/qcom/cpr-common.c index 3e3a4a61cfde..9001dccd4d95 100644 --- a/drivers/pmdomain/qcom/cpr-common.c +++ b/drivers/pmdomain/qcom/cpr-common.c @@ -73,35 +73,42 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, return DIV_ROUND_UP(uV, step_volt) * step_volt; } -const struct cpr_fuse *cpr_get_fuses(struct device *dev, +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, unsigned int num_fuse_corners) { struct cpr_fuse *fuses; - int i; + char cpr_name[11]; /* length of "cpr" + length of UINT_MAX (7) + \0 */ + unsigned int i; fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL); if (!fuses) return ERR_PTR(-ENOMEM); + /* Support legacy bindings */ + if (tid == UINT_MAX) + snprintf(cpr_name, sizeof(cpr_name), "cpr"); + else + snprintf(cpr_name, sizeof(cpr_name), "cpr%d", tid); + for (i = 0; i < num_fuse_corners; i++) { - char tbuf[32]; + char tbuf[50]; - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_ring_osc%d", cpr_name, i + 1); fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].ring_osc) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_init_voltage%d", cpr_name, i + 1); fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].init_voltage) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_quotient%d", cpr_name, i + 1); fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].quotient) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_quotient_offset%d", cpr_name, i + 1); fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].quotient_offset) return ERR_PTR(-ENOMEM); @@ -202,15 +209,15 @@ int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, } EXPORT_SYMBOL_GPL(cpr_find_initial_corner); -unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) +unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid) { struct device_node *np; unsigned int fuse_corner = 0; np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); + if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fuse_corner)) + pr_err("%s: missing 'qcom,opp-fuse-level[%u]' property\n", + __func__, tid); of_node_put(np); @@ -235,15 +242,16 @@ u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, if (!ref_np) goto out_ref; - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); + for_each_available_child_of_node(desc_np, child_np) { child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); + if (child_np && child_req_np == ref_np) { + of_property_read_u64(child_np, "opp-hz", &rate); + goto out; + } + } +out: of_node_put(child_req_np); of_node_put(child_np); of_node_put(ref_np); diff --git a/drivers/pmdomain/qcom/cpr-common.h b/drivers/pmdomain/qcom/cpr-common.h index 1b2fa344eb09..2c5bb81ab713 100644 --- a/drivers/pmdomain/qcom/cpr-common.h +++ b/drivers/pmdomain/qcom/cpr-common.h @@ -22,6 +22,9 @@ struct fuse_corner_data { int ref_uV; int max_uV; int min_uV; + int range_uV; + /* fuse volt: closed/open loop */ + int volt_cloop_adjust; int volt_oloop_adjust; int max_volt_scale; int max_quot_scale; @@ -55,6 +58,7 @@ struct corner { u32 save_ctl; u32 save_irq; u64 freq; + bool is_open_loop; struct fuse_corner *fuse_corner; }; @@ -81,7 +85,7 @@ int cpr_populate_ring_osc_idx(struct device *dev, struct fuse_corner *fuse_corner, const struct cpr_fuse *cpr_fuse, int num_fuse_corners); -const struct cpr_fuse *cpr_get_fuses(struct device *dev, +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, unsigned int num_fuse_corners); int cpr_populate_fuse_common(struct device *dev, struct fuse_corner_data *fdata, @@ -91,7 +95,7 @@ int cpr_populate_fuse_common(struct device *dev, int init_v_step); int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, struct corner *corners, int num_corners); -u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid); u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev); int cpr_calculate_scaling(struct device *dev, const char *quot_offset, diff --git a/drivers/pmdomain/qcom/cpr.c b/drivers/pmdomain/qcom/cpr.c index b2e6e6eaae73..25856cf721ae 100644 --- a/drivers/pmdomain/qcom/cpr.c +++ b/drivers/pmdomain/qcom/cpr.c @@ -851,7 +851,7 @@ static int cpr_corner_init(struct cpr_drv *drv) opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level); if (IS_ERR(opp)) return -EINVAL; - fc = cpr_get_fuse_corner(opp); + fc = cpr_get_fuse_corner(opp, 0); if (!fc) { dev_pm_opp_put(opp); return -EINVAL; @@ -1319,7 +1319,7 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners); + drv->cpr_fuses = cpr_get_fuses(drv->dev, UINT_MAX, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); From patchwork Mon Jul 8 12:22:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726580 Received: from mail-ej1-f48.google.com (mail-ej1-f48.google.com [209.85.218.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EFDCB13D29A for ; Mon, 8 Jul 2024 12:23:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441406; cv=none; b=id2c5PZJ5YariZOqDYzjdYMVhTrd/JQG4eBkWp9amAAMBIE6uWmITDwJmNpf4Y1NnIV6K/A9C2rZDCfvq/N1Irs4SKNji74KZYEpxzjqFKuZbaqJ8P4PxEbGpNkCkZw0HCIvnL0E93MbOC3VqxMNT3yE4BDlFIKCQQy+bZg+t6g= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441406; c=relaxed/simple; bh=8f+Avvl78SnDiitolRTTKslSwoLCwNyhAatenjYcyx4=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=lTakA9gEQo2crA7eIrRr4JE2Y0I8381ONT0sOZYMEqu+Nd3EOMzmSlnYhRYi2zDrLTStIhA2jvL9L1yeTRZSqeMiCzjlU76gZeUrAk56joCESkTlzQlLBXSqSpfQyHAb5NmQDZpBq2DYo7UaMtizjcBMBgJBCqnmkSgxtHlt3FE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=I6rHCy7M; arc=none smtp.client-ip=209.85.218.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="I6rHCy7M" Received: by mail-ej1-f48.google.com with SMTP id a640c23a62f3a-a77c2d89af8so412235966b.2 for ; Mon, 08 Jul 2024 05:23:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441398; x=1721046198; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=4kV4SOhkp5Atk9qtt7BkpvubLR0ogoJ/EFvXbL8rvVo=; b=I6rHCy7MFbuH7qW+GSzQq5/WN7boQxUOu/+OCLMWnkLa+71grBu2OOUyK2bdr93FVd s3v3B5GGaA9w4nYGCNTB8c7PnMDjpzEVP7E/93GPO01Nh152nS79dGzfqfg26ChVcRrB pF33maC6IbG9J/PYP23wZ2chIyFDYDJAjY1OlXyHzFt2M+1QgbuOmZWBAPWTbXVqVGMU K8Pn2hx1bDmc4lwtNHET5XPjD5uGZ0iXhmVoC305GRz+2iEtiyzYPvcI2BQSRgt8ycT8 YyqPbtuWpx+tr29RWqZO/otiQ9OtITq0/sQdFekvAb4HwKi9qywRobBL4zOmWA7zny3/ tLPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441398; x=1721046198; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=4kV4SOhkp5Atk9qtt7BkpvubLR0ogoJ/EFvXbL8rvVo=; b=fnfQhkRq/m+mqHVmXTZhdp4tUxotPNYLTD6cAuZH4GbOSmbiyOLGHsbPFzZwyjAb8v LPLVZ34OZ6Vh8PSy+KzGBXSq8b9LXumMP5BkVEVhTpGuV+15VZbiafcv+CnfYgKpvMaY 3a++JNwGgmDVU1BXQOEK7UK5fuAWDjE2KDVyi4XXOgHWjGyKSSWUZLsNlv+sSwXUP0zV YRvmnpv3BowQovMH8qL3XbAGs09FYvmdBILBTRjCre4e0VeyBkETovLJ9qQs2nqEn0fS iLwaQsyk0rUJjwHlBjBX/5bPED0UlWymOV9E4NshXL1/4sTYrVxslkO2gjZdYezHeXXR ysoA== X-Forwarded-Encrypted: i=1; AJvYcCWpcdqZGT4d6y/yFuePKlHvc59CHYmG6EMNhb9m0DPYHAf2hx1ExIWiReBggiU2OR8TgzjBQbG5u0PYow5gkbff6NjowpPfyDHuU/eBeQ== X-Gm-Message-State: AOJu0Yx8cm+eFU7WmDeBI4z94OBxGL6/hmOJjy64FPjBW20FudKwjd8h XwDJyM/JnV4H2NY8ChhhY+NzfshHeMb57qUcHJ0hz5USTPzfdGoTdRmsnYgvG5I= X-Google-Smtp-Source: AGHT+IErFL/mBb3yY0UkPPJVz3HphKzFNa3aNjLgnoCf9+cLPfRUsOttFlIwmb0zGXDSFeN4jAkRLQ== X-Received: by 2002:a17:906:34d3:b0:a77:b8d4:ae6e with SMTP id a640c23a62f3a-a77ba46872fmr729770466b.23.1720441397736; Mon, 08 Jul 2024 05:23:17 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:17 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:40 +0200 Subject: [PATCH v15 09/10] soc: qcom: Add a driver for CPR3+ Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-9-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=89526; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=Yr7y6EWBRTzTDdNbpDztcoyenNq1KQcfLYUafSvY+nY=; b=AUwKUf5HuS1N+OaZh+WCmqHAJRtjNlqmgJAm54pirHbKZevYbGvSh3jeWAm2RfGDnNS/ECW3I LT7y5xeq34LC87FsL67ZO31j9U81+R5iLaYfzAxQwJ8dKh2ufQ/g2ap X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno Introduce a new driver (based on qcom-cpr for CPRv1 IP) for the newer Qualcomm Core Power Reduction hardware, known downstream as CPR[34h] (h for hardened). In these new CPR versions, support for various new features was introduced. That includes: * voltage reduction for the GPU * security hardening * a new way of controlling CPU DVFS, based on internal communication between CPRh and Operating State Manager MCUs. The CPR v3, v4 and CPRh are present in a broad range of SoCs, from the mid-range to the high end ones including, but not limited to: MSM8953/8996/8998 and SDM630/636/660/845. Note that to reduce the giant review and testing matrix of the driver, this patch (admittedly, somewhat confusingly but for good reasons) omits support for CPR*3* specifically, which is otherwise quite straightforward to add. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, a whole lot of cleanup/fixes] Signed-off-by: Konrad Dybcio --- drivers/pmdomain/qcom/Kconfig | 22 + drivers/pmdomain/qcom/Makefile | 4 +- drivers/pmdomain/qcom/cpr-common.h | 2 + drivers/pmdomain/qcom/cpr3.c | 2711 ++++++++++++++++++++++++++++++++++++ include/soc/qcom/cpr.h | 17 + 5 files changed, 2755 insertions(+), 1 deletion(-) diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig index 3d3948eabef0..f7ab4e57fec4 100644 --- a/drivers/pmdomain/qcom/Kconfig +++ b/drivers/pmdomain/qcom/Kconfig @@ -1,9 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only menu "Qualcomm PM Domains" +config QCOM_CPR_COMMON + tristate + config QCOM_CPR tristate "QCOM Core Power Reduction (CPR) support" depends on ARCH_QCOM && HAS_IOMEM + select QCOM_CPR_COMMON select PM_OPP select REGMAP help @@ -17,6 +21,24 @@ config QCOM_CPR To compile this driver as a module, choose M here: the module will be called qcom-cpr +config QCOM_CPR3 + tristate "QCOM Core Power Reduction (CPR v3/v4/Hardened) support" + depends on ARCH_QCOM && HAS_IOMEM + select QCOM_CPR_COMMON + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on a broad + variety of Qualcomm SoCs like MSM8996, MSM8998, SDM630, SDM660, + SDM845 and others. + + This driver populates OPP tables and makes adjustments to them + based on feedback from the CPR hardware. If you want to do CPU + and/or GPU frequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr3 + config QCOM_RPMHPD tristate "Qualcomm RPMh Power domain driver" depends on QCOM_RPMH && QCOM_COMMAND_DB diff --git a/drivers/pmdomain/qcom/Makefile b/drivers/pmdomain/qcom/Makefile index b28c8d9128c4..d59fac580525 100644 --- a/drivers/pmdomain/qcom/Makefile +++ b/drivers/pmdomain/qcom/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o +obj-$(CONFIG_QCOM_CPR_COMMON) += cpr-common.o +obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR3) += cpr3.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o diff --git a/drivers/pmdomain/qcom/cpr-common.h b/drivers/pmdomain/qcom/cpr-common.h index 2c5bb81ab713..17f55bbc4a11 100644 --- a/drivers/pmdomain/qcom/cpr-common.h +++ b/drivers/pmdomain/qcom/cpr-common.h @@ -65,6 +65,8 @@ struct corner { struct corner_data { unsigned int fuse_corner; u64 freq; + int oloop_vadj; + int cloop_vadj; }; struct acc_desc { diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c new file mode 100644 index 000000000000..de24973978b7 --- /dev/null +++ b/drivers/pmdomain/qcom/cpr3.c @@ -0,0 +1,2711 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2019 Linaro Limited + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpr-common.h" + +#define CPR3_RO_COUNT 16 +#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0) + +/* CPR3 registers */ +#define CPR3_REG_CPR_VERSION 0x0 +#define CPRH_CPR_VERSION_4P5 0x40050000 + +#define CPR3_REG_CPR_CTL 0x4 +#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0) +#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1) +#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6) + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0 + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1 + #define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2 + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3 +#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9) + +#define CPR3_REG_CPR_STATUS 0x8 +#define CPR3_CPR_STATUS_BUSY_MASK BIT(0) + +/* + * This register is not present on controllers that support HW closed-loop + * except CPR4 APSS controller. + */ +#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC + +#define CPR3_REG_CPR_STEP_QUOT 0x14 +#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0) +#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6) +#define CPRH_DELTA_QUOT_STEP_FACTOR 4 + +#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro)) +#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor)) + +#define CPR3_REG_CONT_CMD 0x800 +#define CPR3_CONT_CMD_ACK 0x1 +#define CPR3_CONT_CMD_NACK 0x0 + +#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread)) +#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0) +#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4) +#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8) +#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13) + +#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread)) + +#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread)) +#define CPR3_RESULT0_BUSY_MASK BIT(0) +#define CPR3_RESULT0_STEP_DN_MASK BIT(1) +#define CPR3_RESULT0_STEP_UP_MASK BIT(2) +#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3) +#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8) +#define CPR3_RESULT0_NEG_MASK BIT(20) + +#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread)) +#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0) +#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12) +#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24) +#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28) + +#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread)) +#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0) +#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6) +#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16) +#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24) + +#define CPR3_REG_IRQ_EN 0x81C +#define CPR3_REG_IRQ_CLEAR 0x820 +#define CPR3_REG_IRQ_STATUS 0x824 +#define CPR3_IRQ_UP BIT(3) +#define CPR3_IRQ_MID BIT(2) +#define CPR3_IRQ_DOWN BIT(1) +#define CPR3_IRQ_ALL (CPR3_IRQ_UP | CPR3_IRQ_MID | CPR3_IRQ_DOWN) + +#define CPR3_REG_TARGET_QUOT(thread, ro) (0x840 + 0x440 * (thread) + 0x4 * (ro)) + +/* CPR4 controller specific registers and bit definitions */ +#define CPR4_REG_CPR_TIMER_CLAMP 0x10 +#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27) + +#define CPR4_REG_MISC 0x700 +#define CPR4_MISC_RESET_STEP_QUOT_LOOP_EN BIT(2) +#define CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN BIT(3) + +#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4 +#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0) +#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0 +#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5) +#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5 + +#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8 +#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18) +#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT 18 + +#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8 +#define CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN BIT(4) +#define CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN BIT(7) +#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK GENMASK(16, 12) +#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT 12 + +#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread)) +#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31) +#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0) + +/* CPRh controller specific registers and bit definitions */ +#define __CPRH_REG_CORNER(rbase, tbase, tid, cnum) (rbase + (tbase * tid) + (0x4 * cnum)) +#define CPRH_REG_CORNER(d, t, c) __CPRH_REG_CORNER(d->reg_corner, d->reg_corner_tid, t, c) + +#define CPRH_CTL_OSM_ENABLED BIT(0) +#define CPRH_CTL_BASE_VOLTAGE_MASK GENMASK(10, 1) +#define CPRH_CTL_BASE_VOLTAGE_SHIFT 1 +#define CPRH_CTL_MODE_SWITCH_DELAY_MASK GENMASK(24, 17) +#define CPRH_CTL_MODE_SWITCH_DELAY_SHIFT 17 +#define CPRH_CTL_VOLTAGE_MULTIPLIER_MASK GENMASK(28, 25) +#define CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT 25 + +#define CPRH_CORNER_INIT_VOLTAGE_MASK GENMASK(7, 0) +#define CPRH_CORNER_FLOOR_VOLTAGE_MASK GENMASK(15, 8) +#define CPRH_CORNER_QUOT_DELTA_MASK GENMASK(24, 16) +#define CPRH_CORNER_RO_SEL_MASK GENMASK(28, 25) +#define CPRH_CORNER_CPR_CL_DISABLE BIT(29) + +#define CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE 255 +#define CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE 255 +#define CPRH_CORNER_QUOT_DELTA_MAX_VALUE 511 + +enum cpr_type { + CTRL_TYPE_CPR4, + CTRL_TYPE_CPRH, + CTRL_TYPE_MAX, +}; + +/* + * struct cpr_thread_desc - CPR Thread-specific parameters + * + * @controller_id: Identifier of the CPR controller expected by the HW + * @hw_tid: Identifier of the CPR thread expected by the HW + * @ro_scaling_factor: Scaling factor for each ring oscillator entry + * @ro_scaling_factor_common: Whether the ro_scaling_factor value is common for all fuses + * @init_voltage_step: Voltage in uV for number of steps read from fuse array + * @init_voltage_width: Bit-width of the voltage read from the fuse array + * @sensor_range_start: First sensor ID used by a thread + * @sensor_range_end: Last sensor ID used by a thread + * @step_quot_init_min: Minimum achievable step quotient for this corner + * @step_quot_init_max: Maximum achievable step quotient for this corner + * @num_fuse_corners: Number of valid entries in fuse_corner_data + * @fuse_corner_data: Parameters for calculation of each fuse corner + */ +struct cpr_thread_desc { + u8 controller_id; + u8 hw_tid; + const int (*ro_scaling_factor)[CPR3_RO_COUNT]; + bool ro_scaling_factor_common; + int init_voltage_step; + int init_voltage_width; + u8 sensor_range_start; + u8 sensor_range_end; + u8 step_quot_init_min; + u8 step_quot_init_max; + unsigned int num_fuse_corners; + struct fuse_corner_data *fuse_corner_data; +}; + +/* + * struct cpr_desc - Driver instance-wide CPR parameters + * + * @cpr_type: Type (base version) of the CPR controller + * @num_threads: Max. number of threads supported by this controller + * @timer_delay_us: Loop delay time in uS + * @timer_updn_delay_us: Voltage after-up/before-down delay time in uS + * @timer_cons_up: Wait between consecutive up requests in uS + * @timer_cons_down: Wait between consecutive down requests in uS + * @up_threshold: Generic corner up threshold + * @down_threshold: Generic corner down threshold + * @idle_clocks: CPR Sensor: idle timer in cpr clocks unit + * @count_mode: CPR Sensor: counting mode + * @count_repeat: CPR Sensor: number of times to repeat reading + * @gcnt_us: CPR measurement interval in uS + * @vreg_step_fixed: Regulator voltage per step (if vreg unusable) + * @vreg_step_up_limit: Num. of steps up at once before re-measuring sensors + * @vreg_step_down_limit: Num. of steps dn at once before re-measuring sensors + * @vdd_settle_time_us: Settling timer to account for one VDD supply step + * @corner_settle_time_us: Settle time for corner switch request + * @mem_acc_threshold: Memory Accelerator (MEM-ACC) voltage threshold + * @apm_threshold: Array Power Mux (APM) voltage threshold + * @apm_crossover: Array Power Mux (APM) corner crossover voltage + * @apm_hysteresis: Hysteresis for APM V-threshold related calculations + * @cpr_base_voltage: Safety: Absolute minimum voltage (uV) on this CPR + * @cpr_max_voltage: Safety: Absolute maximum voltage (uV) on this CPR + * @pd_throttle_val: CPR Power Domain throttle during voltage switch + * @threads: Array containing "CPR Thread" specific parameters + * @reduce_to_fuse_uV: Reduce corner max volts (if higher) to fuse ceiling + * @reduce_to_corner_uV: Reduce corner max volts (if higher) to corner ceil. + * @hw_closed_loop_en: Enable CPR HW Closed-Loop voltage auto-adjustment + */ +struct cpr_desc { + enum cpr_type cpr_type; + unsigned int num_threads; + unsigned int timer_delay_us; + u8 timer_updn_delay_us; + u8 timer_cons_up; + u8 timer_cons_down; + u8 up_threshold; + u8 down_threshold; + u8 idle_clocks; + u8 count_mode; + u8 count_repeat; + u8 gcnt_us; + u16 vreg_step_fixed; + u8 vreg_step_up_limit; + u8 vreg_step_down_limit; + u8 vdd_settle_time_us; + u8 corner_settle_time_us; + int mem_acc_threshold; + int apm_threshold; + int apm_crossover; + int apm_hysteresis; + u32 cpr_base_voltage; + u32 cpr_max_voltage; + u32 pd_throttle_val; + + const struct cpr_thread_desc **threads; + bool reduce_to_fuse_uV; + bool reduce_to_corner_uV; + bool hw_closed_loop_en; +}; + +struct cpr_drv; +struct cpr_thread { + int num_corners; + int id; + bool enabled; + void __iomem *base; + struct clk *cpu_clk; + struct corner *corner; + struct corner *corners; + struct fuse_corner *fuse_corners; + struct cpr_drv *drv; + struct cpr_ext_data ext_data; + struct generic_pm_domain pd; + struct device *attached_cpu_dev; + struct work_struct restart_work; + bool restarting; + + const struct cpr_fuse *cpr_fuses; + const struct cpr_thread_desc *desc; +}; + +struct cpr_drv { + int irq; + unsigned int ref_clk_khz; + struct device *dev; + struct mutex lock; + struct regulator *vreg; + struct regmap *tcsr; + u32 gcnt; + u32 speed_bin; + u32 fusing_rev; + u32 last_uV; + u32 cpr_hw_rev; + u32 reg_corner; + u32 reg_corner_tid; + u32 reg_ctl; + u32 reg_status; + int fuse_level_set; + int extra_corners; + unsigned int vreg_step; + bool enabled; + + struct cpr_thread *threads; + struct genpd_onecell_data cell_data; + + const struct cpr_desc *desc; + const struct acc_desc *acc_desc; + struct dentry *debugfs; +}; + +/** + * cpr_get_corner_post_vadj() - Get corner post-voltage adjustment values + * @opp: Pointer to the corresponding OPP struct + * @tid: CPR thread ID + * @open_loop: Pointer to the closed-loop adjustment value + * @closed_loop: Pointer to the open-loop adjustment value + * + * Return: 0 on success, negative errno on failure + */ +static int cpr_get_corner_post_vadj(struct dev_pm_opp *opp, u32 tid, + s32 *open_loop, s32 *closed_loop) +{ + struct device_node *np; + int ret; + + /* + * There is no of_property_read_s32_index, so we just store the + * result into a s32 variable. After all, the OF API is doing + * the exact same for of_property_read_s32... + */ + np = dev_pm_opp_get_of_node(opp); + + ret = of_property_read_u32_index(np, "qcom,opp-oloop-vadj", + tid, open_loop); + if (ret) + goto out; + + ret = of_property_read_u32_index(np, "qcom,opp-cloop-vadj", + tid, closed_loop); + +out: + of_node_put(np); + return ret; +} + +static void cpr_write(struct cpr_thread *thread, u32 offset, u32 value) +{ + writel(value, thread->base + offset); +} + +static u32 cpr_read(struct cpr_thread *thread, u32 offset) +{ + return readl(thread->base + offset); +} + +static void +cpr_masked_write(struct cpr_thread *thread, u32 offset, u32 mask, u32 value) +{ + u32 val; + + val = readl(thread->base + offset); + val &= ~mask; + val |= value & mask; + writel(val, thread->base + offset); +} + +static void cpr_irq_clr(struct cpr_thread *thread) +{ + cpr_write(thread, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_ALL); +} + +static void cpr_irq_clr_nack(struct cpr_thread *thread) +{ + cpr_irq_clr(thread); + cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK); +} + +static void cpr_irq_clr_ack(struct cpr_thread *thread) +{ + cpr_irq_clr(thread); + cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_ACK); +} + +static void cpr_irq_set(struct cpr_thread *thread, u32 int_bits) +{ + /* On CPR-hardened, interrupts are managed by and on firmware */ + if (thread->drv->desc->cpr_type == CTRL_TYPE_CPRH) + return; + + cpr_write(thread, CPR3_REG_IRQ_EN, int_bits); +} + +/** + * cpr_ctl_enable() - Enable CPR thread + * @thread: Structure holding CPR thread-specific parameters + */ +static void cpr_ctl_enable(struct cpr_thread *thread) +{ + if (thread->drv->enabled && !thread->restarting) { + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, + CPR3_CPR_CTL_LOOP_EN_MASK); + } +} + +/** + * cpr_ctl_disable() - Disable CPR thread + * @thread: Structure holding CPR thread-specific parameters + */ +static void cpr_ctl_disable(struct cpr_thread *thread) +{ + const struct cpr_desc *desc = thread->drv->desc; + + if (desc->cpr_type != CTRL_TYPE_CPRH) { + cpr_irq_set(thread, 0); + cpr_irq_clr(thread); + } + + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, 0); +} + +/** + * cpr_ctl_is_enabled() - Check if thread is enabled + * @thread: Structure holding CPR thread-specific parameters + * + * Return: true if the CPR is enabled, false if it is disabled. + */ +static bool cpr_ctl_is_enabled(struct cpr_thread *thread) +{ + u32 reg_val; + + reg_val = cpr_read(thread, CPR3_REG_CPR_CTL); + return reg_val & CPR3_CPR_CTL_LOOP_EN_MASK; +} + +/** + * cpr_check_any_thread_busy() - Check if HW is done processing + * @thread: Structure holding CPR thread-specific parameters + * + * Return: true if the CPR is busy, false if it is ready. + */ +static bool cpr_check_any_thread_busy(struct cpr_thread *thread) +{ + int i; + + for (i = 0; i < thread->drv->desc->num_threads; i++) + if (cpr_read(thread, CPR3_REG_RESULT0(i)) & + CPR3_RESULT0_BUSY_MASK) + return true; + + return false; +} + +static void cpr_restart_worker(struct work_struct *work) +{ + struct cpr_thread *thread = container_of(work, struct cpr_thread, + restart_work); + struct cpr_drv *drv = thread->drv; + int i; + + mutex_lock(&drv->lock); + + thread->restarting = true; + cpr_ctl_disable(thread); + disable_irq(drv->irq); + + mutex_unlock(&drv->lock); + + for (i = 0; i < 20; i++) { + u32 cpr_status = cpr_read(thread, CPR3_REG_CPR_STATUS); + u32 ctl = cpr_read(thread, CPR3_REG_CPR_CTL); + + if ((cpr_status & CPR3_CPR_STATUS_BUSY_MASK) && + !(ctl & CPR3_CPR_CTL_LOOP_EN_MASK)) + break; + + udelay(10); + } + + cpr_irq_clr(thread); + + for (i = 0; i < 20; i++) { + u32 status = cpr_read(thread, CPR3_REG_IRQ_STATUS); + + if (!(status & CPR3_IRQ_ALL)) + break; + udelay(10); + } + + mutex_lock(&drv->lock); + + thread->restarting = false; + enable_irq(drv->irq); + cpr_ctl_enable(thread); + + mutex_unlock(&drv->lock); +} + +/** + * cpr_corner_restore() - Restore saved corner level + * @thread: Structure holding CPR thread-specific parameters + * @corner: Structure holding the saved corner level + */ +static void cpr_corner_restore(struct cpr_thread *thread, + struct corner *corner) +{ + const struct cpr_thread_desc *tdesc = thread->desc; + struct fuse_corner *fuse = corner->fuse_corner; + struct cpr_drv *drv = thread->drv; + u32 ro_sel = fuse->ring_osc_idx; + + cpr_write(thread, CPR3_REG_GCNT(ro_sel), drv->gcnt); + + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), + CPR3_RO_MASK & ~BIT(ro_sel)); + + cpr_write(thread, CPR3_REG_TARGET_QUOT(tdesc->hw_tid, ro_sel), + fuse->quot - corner->quot_adjust); + + if (drv->desc->cpr_type == CTRL_TYPE_CPR4) + cpr_masked_write(thread, + CPR4_REG_CPR_MASK_THREAD(tdesc->hw_tid), + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, 0); + + thread->corner = corner; + corner->last_uV = corner->uV; +} + +/** + * cpr_set_acc() - Set fuse level to the mem-acc + * @drv: Main driver structure + * @f: Fuse level + */ +static void cpr_set_acc(struct cpr_drv *drv, int f) +{ + const struct acc_desc *desc = drv->acc_desc; + struct reg_sequence *s = desc->settings; + int n = desc->num_regs_per_fuse; + + if (!drv->tcsr) + return; + + if (!s || f == drv->fuse_level_set) + return; + + regmap_multi_reg_write(drv->tcsr, s + (n * f), n); + drv->fuse_level_set = f; +} + +/** + * cpr_commit_state() - Set the newly requested voltage + * @thread: Structure holding CPR thread-specific parameters + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_commit_state(struct cpr_thread *thread) +{ + int min_uV = 0, max_uV = 0, new_uV = 0, fuse_level = 0; + struct cpr_drv *drv = thread->drv; + enum voltage_change_dir dir; + u32 next_irqmask = 0; + int ret, i; + + /* On CPRhardened, control states are managed in firmware */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + return 0; + + for (i = 0; i < drv->desc->num_threads; i++) { + struct cpr_thread *t = &drv->threads[i]; + + if (!t->corner) + continue; + + fuse_level = max(fuse_level, + (int) (t->corner->fuse_corner - + &t->fuse_corners[0])); + + max_uV = max(max_uV, t->corner->max_uV); + min_uV = max(min_uV, t->corner->min_uV); + new_uV = max(new_uV, t->corner->last_uV); + } + dev_vdbg(drv->dev, "%s: new uV: %d, last uV: %d\n", + __func__, new_uV, drv->last_uV); + + /* + * Safety measure: if the voltage is out of the globally allowed + * range, then go out and warn the user. + * This should *never* happen. + */ + if (new_uV > drv->desc->cpr_max_voltage || + new_uV < drv->desc->cpr_base_voltage) { + dev_warn(drv->dev, "Voltage (%u uV) out of range.", new_uV); + return -EINVAL; + } + + if (new_uV == drv->last_uV || fuse_level == drv->fuse_level_set) + goto out; + + dir = fuse_level > drv->fuse_level_set ? UP : DOWN; + + if (dir == DOWN) + cpr_set_acc(drv, fuse_level); + + dev_vdbg(drv->dev, "setting voltage: %d\n", new_uV); + + ret = regulator_set_voltage(drv->vreg, new_uV, new_uV); + if (ret) { + dev_err_ratelimited(drv->dev, "failed to set voltage %d: %d\n", new_uV, ret); + return ret; + } + + if (dir == UP) + cpr_set_acc(drv, fuse_level); + + drv->last_uV = new_uV; +out: + if (new_uV > min_uV) + next_irqmask |= CPR3_IRQ_DOWN; + if (new_uV < max_uV) + next_irqmask |= CPR3_IRQ_UP; + + cpr_irq_set(thread, next_irqmask); + + return 0; +} + +static unsigned int cpr_get_cur_perf_state(struct cpr_thread *thread) +{ + return thread->corner ? thread->corner - thread->corners + 1 : 0; +} + +/** + * cpr_scale() - Calculate new voltage for the received direction + * @thread: Structure holding CPR thread-specific parameters + * @dir: Enumeration for voltage change direction + * + * The CPR scales one by one: this function calculates the new + * voltage to set when a voltage-UP or voltage-DOWN request comes + * and stores it into the per-thread structure that gets passed. + */ +static void cpr_scale(struct cpr_thread *thread, enum voltage_change_dir dir) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_thread_desc *tdesc = thread->desc; + u32 val, error_steps; + int last_uV, new_uV; + struct corner *corner; + + if (dir != UP && dir != DOWN) + return; + + corner = thread->corner; + val = cpr_read(thread, CPR3_REG_RESULT0(tdesc->hw_tid)); + error_steps = FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, val); + + last_uV = corner->last_uV; + + if (dir == UP) { + if (!(val & CPR3_RESULT0_STEP_UP_MASK)) + return; + + /* Calculate new voltage */ + new_uV = last_uV + drv->vreg_step; + new_uV = min(new_uV, corner->max_uV); + + dev_vdbg(drv->dev, "[T%u] UP - new_uV=%d last_uV=%d p-state=%u st=%u\n", + thread->id, new_uV, last_uV, + cpr_get_cur_perf_state(thread), error_steps); + } else { + if (!(val & CPR3_RESULT0_STEP_DN_MASK)) + return; + + /* Calculate new voltage */ + new_uV = last_uV - drv->vreg_step; + new_uV = max(new_uV, corner->min_uV); + dev_vdbg(drv->dev, "[T%u] DOWN - new_uV=%d last_uV=%d p-state=%u st=%u\n", + thread->id, new_uV, last_uV, + cpr_get_cur_perf_state(thread), error_steps); + } + corner->last_uV = new_uV; +} + +/** + * cpr_irq_handler() - Handle CPR3/CPR4 status interrupts + * @irq: Number of the interrupt + * @dev: Pointer to the cpr_thread structure + * + * Handle the interrupts coming from non-hardened CPR HW as to get + * an ok to scale voltages immediately, or to pass error status to + * the hardware (either success/ACK or failure/NACK). + * + * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled. + */ +static irqreturn_t cpr_irq_handler(int irq, void *dev) +{ + struct cpr_thread *thread = dev; + struct cpr_drv *drv = thread->drv; + irqreturn_t ret = IRQ_HANDLED; + int i, rc; + enum voltage_change_dir dir = NO_CHANGE; + u32 val; + + guard(mutex)(&drv->lock); + + val = cpr_read(thread, CPR3_REG_IRQ_STATUS); + + dev_vdbg(drv->dev, "IRQ_STATUS = 0x%x\n", val); + + if (!cpr_ctl_is_enabled(thread)) { + dev_vdbg(drv->dev, "CPR is disabled\n"); + return IRQ_NONE; + } else if (cpr_check_any_thread_busy(thread)) { + cpr_irq_clr_nack(thread); + dev_dbg(drv->dev, "CPR measurement is not ready\n"); + } else { + /* + * Following sequence of handling is as per each IRQ's + * priority + */ + if (val & CPR3_IRQ_UP) + dir = UP; + else if (val & CPR3_IRQ_DOWN) + dir = DOWN; + + if (dir != NO_CHANGE) { + for (i = 0; i < drv->desc->num_threads; i++) { + thread = &drv->threads[i]; + cpr_scale(thread, dir); + } + + rc = cpr_commit_state(thread); + if (rc) + cpr_irq_clr_nack(thread); + else + cpr_irq_clr_ack(thread); + } else if (val & CPR3_IRQ_MID) { + dev_dbg(drv->dev, "IRQ occurred for Mid Flag\n"); + } else { + dev_warn(drv->dev, "IRQ occurred for unknown flag (%#08x)\n", val); + schedule_work(&thread->restart_work); + } + } + + return ret; +} + +static int cpr_switch(struct cpr_drv *drv) +{ + bool enabled = false; + int i, ret; + + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + return 0; + + for (i = 0; i < drv->desc->num_threads && !enabled; i++) + enabled = drv->threads[i].enabled; + + dev_vdbg(drv->dev, "%s: enabled = %d\n", __func__, enabled); + + if (enabled == drv->enabled) + return 0; + + if (enabled) { + ret = regulator_enable(drv->vreg); + if (ret) + return ret; + + drv->enabled = enabled; + + for (i = 0; i < drv->desc->num_threads; i++) + if (drv->threads[i].corner) + break; + + if (i < drv->desc->num_threads) { + cpr_irq_clr(&drv->threads[i]); + + cpr_commit_state(&drv->threads[i]); + cpr_ctl_enable(&drv->threads[i]); + } + } else { + for (i = 0; i < drv->desc->num_threads && !enabled; i++) + cpr_ctl_disable(&drv->threads[i]); + + drv->enabled = enabled; + + ret = regulator_disable(drv->vreg); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * cpr_enable() - Enables a CPR thread + * @thread: Structure holding CPR thread-specific parameters + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_enable(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + + dev_dbg(drv->dev, "Enabling thread %d\n", thread->id); + + guard(mutex)(&drv->lock); + + thread->enabled = true; + + return cpr_switch(thread->drv); +} + +/** + * cpr_disable() - Disables a CPR thread + * @thread: Structure holding CPR thread-specific parameters + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_disable(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + + dev_dbg(drv->dev, "Disabling thread %d\n", thread->id); + + guard(mutex)(&drv->lock); + + thread->enabled = false; + + return cpr_switch(thread->drv); +} + +/** + * cpr_configure() - Configure main HW parameters + * @thread: Structure holding CPR thread-specific parameters + * + * This function configures the main CPR hardware parameters, such as + * internal timers (and delays), sensor ownerships, activates and/or + * deactivates cpr-threads and others, as one sequence for all of the + * versions supported in this driver. By design, the function may + * return a success earlier if the sequence for "a previous version" + * has ended. + * + * Context: The CPR must be clocked before calling this function! + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_configure(struct cpr_thread *thread) +{ + const struct cpr_thread_desc *tdesc = thread->desc; + struct cpr_drv *drv = thread->drv; + const struct cpr_desc *desc = drv->desc; + u32 val; + int i; + + /* Disable interrupt and CPR */ + cpr_irq_set(thread, 0); + cpr_write(thread, CPR3_REG_CPR_CTL, 0); + + /* Init and save gcnt */ + drv->gcnt = drv->ref_clk_khz * desc->gcnt_us; + do_div(drv->gcnt, 1000); + + /* Program the delay count for the timer */ + val = drv->ref_clk_khz * desc->timer_delay_us; + do_div(val, 1000); + + cpr_write(thread, CPR3_REG_CPR_TIMER_AUTO_CONT, val); + + dev_dbg(drv->dev, "Timer count: %#0x (for %d us)\n", val, + desc->timer_delay_us); + + /* Program the control register */ + val = FIELD_PREP(CPR3_CPR_CTL_IDLE_CLOCKS_MASK, desc->idle_clocks) | + FIELD_PREP(CPR3_CPR_CTL_COUNT_MODE_MASK, desc->count_mode) | + FIELD_PREP(CPR3_CPR_CTL_COUNT_REPEAT_MASK, desc->count_repeat); + cpr_write(thread, CPR3_REG_CPR_CTL, val); + + /* Configure CPR default step quotients */ + val = FIELD_PREP(CPR3_CPR_STEP_QUOT_MIN_MASK, tdesc->step_quot_init_min) | + FIELD_PREP(CPR3_CPR_STEP_QUOT_MAX_MASK, tdesc->step_quot_init_max); + + cpr_write(thread, CPR3_REG_CPR_STEP_QUOT, val); + + /* Configure the CPR sensor ownership (always on thread 0) */ + for (i = tdesc->sensor_range_start; i < tdesc->sensor_range_end; i++) + cpr_write(thread, CPR3_REG_SENSOR_OWNER(i), 0); + + /* Program Consecutive Up & Down */ + val = FIELD_PREP(CPR3_THRESH_CONS_DOWN_MASK, desc->timer_cons_down) | + FIELD_PREP(CPR3_THRESH_CONS_UP_MASK, desc->timer_cons_up) | + FIELD_PREP(CPR3_THRESH_DOWN_THRESH_MASK, desc->down_threshold) | + FIELD_PREP(CPR3_THRESH_UP_THRESH_MASK, desc->up_threshold); + cpr_write(thread, CPR3_REG_THRESH(tdesc->hw_tid), val); + + /* Mask all ring oscillators for all threads initially */ + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), CPR3_RO_MASK); + + /* HW Closed-loop control */ + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN, + desc->hw_closed_loop_en ? + CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN : 0); + + /* Additional configuration for CPR4 and beyond */ + if (desc->cpr_type < CTRL_TYPE_CPR4) + return 0; + + /* Disable threads initially only on non-hardened CPR4 */ + if (desc->cpr_type == CTRL_TYPE_CPR4) + cpr_masked_write(thread, CPR4_REG_CPR_MASK_THREAD(1), + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); + + if (tdesc->hw_tid > 0) + cpr_masked_write(thread, CPR4_REG_MISC, + CPR4_MISC_RESET_STEP_QUOT_LOOP_EN | + CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN, + CPR4_MISC_RESET_STEP_QUOT_LOOP_EN | + CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN); + + val = drv->vreg_step; + do_div(val, 1000); + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK, + val << CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT); + + cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT, + CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK, + desc->vreg_step_down_limit << + CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT); + + cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT, + CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK, + desc->vreg_step_up_limit << + CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT); + + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN, + CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN); + + if (tdesc->hw_tid > 0) + cpr_masked_write(thread, CPR4_REG_CPR_TIMER_CLAMP, + CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN, + CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN); + + /* Settling timer to account for one VDD supply step */ + if (desc->vdd_settle_time_us > 0) { + u32 m = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK; + u32 s = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT; + + cpr_masked_write(thread, CPR4_REG_MARGIN_TEMP_CORE_TIMERS, + m, desc->vdd_settle_time_us << s); + } + + /* Additional configuration for CPR-hardened */ + if (desc->cpr_type != CTRL_TYPE_CPRH) + return 0; + + /* Settling timer to account for one corner-switch request */ + if (desc->corner_settle_time_us > 0) + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_MODE_SWITCH_DELAY_MASK, + desc->corner_settle_time_us << + CPRH_CTL_MODE_SWITCH_DELAY_SHIFT); + + /* Base voltage and multiplier values for CPRh internal calculations */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_BASE_VOLTAGE_MASK, + (DIV_ROUND_UP(desc->cpr_base_voltage, + drv->vreg_step) << + CPRH_CTL_BASE_VOLTAGE_SHIFT)); + + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_VOLTAGE_MULTIPLIER_MASK, + DIV_ROUND_UP(drv->vreg_step, 1000) << + CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT); + + return 0; +} + +static int cprh_dummy_set_performance_state(struct generic_pm_domain *domain, + unsigned int state) +{ + return 0; +} + +static int cpr_set_performance_state(struct generic_pm_domain *domain, + unsigned int state) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + struct corner *corner, *end; + int ret = 0; + + guard(mutex)(&drv->lock); + + dev_dbg(drv->dev, "setting perf state: %u (prev state: %u thread: %u)\n", + state, cpr_get_cur_perf_state(thread), thread->id); + + /* + * Determine new corner we're going to. + * Remove one since lowest performance state is 1. + */ + corner = thread->corners + state - 1; + end = &thread->corners[thread->num_corners - 1]; + if (corner > end || corner < thread->corners) + return -EINVAL; + + cpr_ctl_disable(thread); + + cpr_irq_clr(thread); + if (thread->corner != corner) + cpr_corner_restore(thread, corner); + + ret = cpr_commit_state(thread); + if (ret) + return ret; + + cpr_ctl_enable(thread); + + dev_dbg(drv->dev, "set perf state %u on thread %u\n", state, thread->id); + + return ret; +} + +/** + * cpr3_adjust_quot - Adjust the closed-loop quotients + * @ring_osc_factor: Ring oscillator adjustment factor + * @volt_closed_loop: Closed-loop voltage adjustment factor + * + * Calculates the quotient adjustment factor based on closed-loop + * quotients and ring oscillator factor. + * + * Return: Adjusted quotient + */ +static int cpr3_adjust_quot(int ring_osc_factor, int volt_closed_loop) +{ + s64 temp = (s64)ring_osc_factor * volt_closed_loop; + + return (int)div_s64(temp, 1000000); +} + +/** + * cpr_fuse_corner_init() - Calculate fuse corner table + * @thread: Structure holding CPR thread-specific parameters + * + * This function populates the fuse corners table by reading the + * values from the fuses, eventually adjusting them with a fixed + * per-corner offset and doing basic checks about them being + * supported by the regulator that is assigned to this CPR - if + * it is available (on CPR-Hardened, there is no usable vreg, as + * that is protected by the hypervisor). + * + * Return: Zero for success, negative number on error + */ +static int cpr_fuse_corner_init(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_thread_desc *desc = thread->desc; + const struct cpr_fuse *cpr_fuse = thread->cpr_fuses; + struct fuse_corner_data *fdata; + struct fuse_corner *fuse, *prev_fuse, *end; + int i, ret; + + /* Populate fuse_corner members */ + fuse = thread->fuse_corners; + prev_fuse = &fuse[0]; + end = &fuse[desc->num_fuse_corners - 1]; + fdata = desc->fuse_corner_data; + + for (i = 0; fuse <= end; fuse++, cpr_fuse++, i++, fdata++) { + int sf_idx = desc->ro_scaling_factor_common ? 0 : i; + int factor = desc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx]; + + ret = cpr_populate_fuse_common(drv->dev, fdata, cpr_fuse, + fuse, drv->vreg_step, + desc->init_voltage_width, + desc->init_voltage_step); + if (ret) + return ret; + + /* + * Adjust the fuse quot with per-fuse-corner closed-loop + * voltage adjustment parameters. + */ + fuse->quot += cpr3_adjust_quot(factor, fdata->volt_cloop_adjust); + + /* CPRh: no regulator access... */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + goto skip_pvs_restrict; + + /* Re-check if corner voltage range is supported by regulator */ + ret = cpr_check_vreg_constraints(drv->dev, drv->vreg, fuse); + if (ret) + return ret; + +skip_pvs_restrict: + if (fuse->uV < prev_fuse->uV) + fuse->uV = prev_fuse->uV; + prev_fuse = fuse; + dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%u quot %d\n", + i, fuse->min_uV, fuse->uV, fuse->max_uV, + fuse->ring_osc_idx, fuse->quot); + + /* Check if constraints are valid */ + if (fuse->uV < fuse->min_uV || fuse->uV > fuse->max_uV) { + dev_err(drv->dev, "fuse corner %d: Bad voltage range.\n", i); + return -EINVAL; + } + } + + return 0; +} + +static void cpr3_restrict_corner(struct corner *corner, int threshold, + int hysteresis, int step) +{ + if (threshold > corner->min_uV && threshold <= corner->max_uV) { + if (corner->uV >= threshold) { + corner->min_uV = max(corner->min_uV, + threshold - hysteresis); + if (corner->min_uV > corner->uV) + corner->uV = corner->min_uV; + } else { + corner->max_uV = threshold; + corner->max_uV -= step; + } + } +} + +/* + * cprh_corner_adjust_opps() - Set voltage on each CPU OPP table entry + * + * On CPR-Hardened, the voltage level is controlled internally through + * the OSM hardware: in order to initialize the latter, we have to + * communicate the voltage to its driver, so that it will be able to + * write the right parameters (as they have to be set both on the CPRh + * and on the OSM) on it. + * This function is called only for CPRh. + * + * Return: Zero for success, negative number for error. + */ +static int cprh_corner_adjust_opps(struct cpr_thread *thread) +{ + struct corner *corner = thread->corners; + struct cpr_drv *drv = thread->drv; + int i, ret; + + for (i = 0; i < thread->num_corners; i++) { + ret = dev_pm_opp_adjust_voltage(thread->attached_cpu_dev, + corner[i].freq, + corner[i].uV, + corner[i].min_uV, + corner[i].max_uV); + if (ret) + break; + + dev_dbg(drv->dev, "OPP voltage adjusted for %llu Hz, %d uV\n", + corner[i].freq, corner[i].uV); + } + + /* If we couldn't adjust voltage for all corners, something went wrong */ + if (i < thread->num_corners) + return -EINVAL; + + return ret; +} + +/** + * cpr3_corner_init() - Calculate and set-up corners for the CPR HW + * @thread: Structure holding CPR thread-specific parameters + * + * This function calculates all the corner parameters by comparing + * and interpolating the values read from the various set-points + * read from the fuses (also called "fuse corners") to generate and + * program to the CPR a lookup table that describes each voltage + * step, mapped to a performance level (or corner number). + * + * It also programs other essential parameters on the CPR and - if + * we are dealing with CPR-Hardened, it will also enable the internal + * interface between the Operating State Manager (OSM) and the CPRh + * in order to achieve CPU DVFS. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_corner_init(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_desc *desc = drv->desc; + const struct cpr_thread_desc *tdesc = thread->desc; + const struct cpr_fuse *fuses = thread->cpr_fuses; + int i, ret, total_corners, extra_corners, level, scaling = 0; + unsigned int fnum, fc; + const char *quot_offset; + const struct fuse_corner_data *fdata; + struct fuse_corner *fuse, *prev_fuse; + struct corner *corner, *prev_corner, *end; + struct corner_data *cdata; + struct dev_pm_opp *opp; + u32 ring_osc_mask = CPR3_RO_MASK, min_quotient = U32_MAX; + u64 freq; + + corner = thread->corners; + prev_corner = &thread->corners[0]; + end = &corner[thread->num_corners - 1]; + + cdata = devm_kcalloc(drv->dev, thread->num_corners + drv->extra_corners, + sizeof(struct corner_data), GFP_KERNEL); + if (!cdata) + return -ENOMEM; + + for (level = 1; level <= thread->num_corners; level++) { + opp = dev_pm_opp_find_level_exact(&thread->pd.dev, level); + if (IS_ERR(opp)) + return -EINVAL; + + fc = cpr_get_fuse_corner(opp, thread->id); + if (!fc) { + dev_pm_opp_put(opp); + return -EINVAL; + } + fnum = fc - 1; + + freq = cpr_get_opp_hz_for_req(opp, thread->attached_cpu_dev); + if (!freq) { + thread->num_corners = max(level - 1, 0); + end = &thread->corners[thread->num_corners - 1]; + break; + } + + ret = cpr_get_corner_post_vadj(opp, thread->id, + &cdata[level - 1].oloop_vadj, + &cdata[level - 1].cloop_vadj); + if (ret) { + dev_pm_opp_put(opp); + return ret; + } + + cdata[level - 1].fuse_corner = fnum; + cdata[level - 1].freq = freq; + + fuse = &thread->fuse_corners[fnum]; + dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n", + freq, dev_pm_opp_get_level(opp) - 1, fnum); + if (freq > fuse->max_freq) + fuse->max_freq = freq; + dev_pm_opp_put(opp); + + /* + * Make sure that the frequencies in the table are in ascending + * order, as this is critical for the algorithm to work. + */ + if (cdata[level - 2].freq > freq) { + dev_err(drv->dev, "Frequency table not in ascending order.\n"); + return -EINVAL; + } + } + + if (thread->num_corners < 2) { + dev_err(drv->dev, "need at least 2 OPPs to use CPR\n"); + return -EINVAL; + } + + /* + * Get the quotient adjustment scaling factor, according to: + * + * scaling = min(1000 * (QUOT(corner_N) - QUOT(corner_N-1)) + * / (freq(corner_N) - freq(corner_N-1)), max_factor) + * + * QUOT(corner_N): quotient read from fuse for fuse corner N + * QUOT(corner_N-1): quotient read from fuse for fuse corner (N - 1) + * freq(corner_N): max frequency in MHz supported by fuse corner N + * freq(corner_N-1): max frequency in MHz supported by fuse corner + * (N - 1) + * + * Then walk through the corners mapped to each fuse corner + * and calculate the quotient adjustment for each one using the + * following formula: + * + * quot_adjust = (freq_max - freq_corner) * scaling / 1000 + * + * freq_max: max frequency in MHz supported by the fuse corner + * freq_corner: frequency in MHz corresponding to the corner + * scaling: calculated from above equation + * + * + * + + + * | v | + * q | f c o | f c + * u | c l | c + * o | f t | f + * t | c a | c + * | c f g | c f + * | e | + * +--------------- +---------------- + * 0 1 2 3 4 5 6 0 1 2 3 4 5 6 + * corner corner + * + * c = corner + * f = fuse corner + * + */ + for (i = 0; corner <= end; corner++, i++) { + int ro_fac, sf_idx, vadj, prev_quot; + u64 freq_diff_mhz; + + fnum = cdata[i].fuse_corner; + fdata = &tdesc->fuse_corner_data[fnum]; + quot_offset = fuses[fnum].quotient_offset; + fuse = &thread->fuse_corners[fnum]; + ring_osc_mask &= (u16)(~BIT(fuse->ring_osc_idx)); + if (fnum) + prev_fuse = &thread->fuse_corners[fnum - 1]; + else + prev_fuse = NULL; + + corner->fuse_corner = fuse; + corner->freq = cdata[i].freq; + corner->uV = fuse->uV; + + if (prev_fuse) { + if (prev_fuse->ring_osc_idx == fuse->ring_osc_idx) + quot_offset = NULL; + + scaling = cpr_calculate_scaling(drv->dev, quot_offset, + fdata, corner); + if (scaling < 0) + return scaling; + + freq_diff_mhz = fuse->max_freq - corner->freq; + do_div(freq_diff_mhz, 1000000); /* now in MHz */ + + corner->quot_adjust = scaling * freq_diff_mhz; + do_div(corner->quot_adjust, 1000); + + /* Fine-tune QUOT (closed-loop) based on fixed values */ + sf_idx = tdesc->ro_scaling_factor_common ? 0 : fnum; + ro_fac = tdesc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx]; + vadj = cdata[i].cloop_vadj; + corner->quot_adjust -= cpr3_adjust_quot(ro_fac, vadj); + dev_vdbg(drv->dev, "Quot fine-tuning to %d for post-vadj=%d\n", + corner->quot_adjust, vadj); + + /* + * Make sure that we scale (up) monotonically. + * P.S.: Fuse quots can never be descending. + */ + prev_quot = prev_corner->fuse_corner->quot; + prev_quot -= prev_corner->quot_adjust; + if (fuse->quot - corner->quot_adjust < prev_quot) { + int new_adj = prev_corner->fuse_corner->quot; + + new_adj -= fuse->quot; + dev_vdbg(drv->dev, "Monotonic increase forced: %d->%d\n", + corner->quot_adjust, new_adj); + corner->quot_adjust = new_adj; + } + + corner->uV = cpr_interpolate(corner, + drv->vreg_step, fdata); + } + /* Negative fuse quotients are nonsense. */ + if (fuse->quot < corner->quot_adjust) + return -EINVAL; + + min_quotient = min(min_quotient, + (u32)(fuse->quot - corner->quot_adjust)); + + /* Fine-tune voltages (open-loop) based on fixed values */ + corner->uV += cdata[i].oloop_vadj; + dev_dbg(drv->dev, "Voltage fine-tuning to %d for post-vadj=%d\n", + corner->uV, cdata[i].oloop_vadj); + + corner->max_uV = fuse->max_uV; + corner->min_uV = fuse->min_uV; + corner->uV = clamp(corner->uV, corner->min_uV, corner->max_uV); + dev_vdbg(drv->dev, "Clamped after interpolation: [%d %d %d]\n", + corner->min_uV, corner->uV, corner->max_uV); + + /* Make sure that we scale monotonically here, too. */ + if (corner->uV < prev_corner->uV) + corner->uV = prev_corner->uV; + + corner->last_uV = corner->uV; + + /* Reduce the ceiling voltage if needed */ + if (desc->reduce_to_corner_uV && corner->uV < corner->max_uV) + corner->max_uV = corner->uV; + else if (desc->reduce_to_fuse_uV && fuse->uV < corner->max_uV) + corner->max_uV = max(corner->min_uV, fuse->uV); + + corner->min_uV = max(corner->max_uV - fdata->range_uV, + corner->min_uV); + + /* + * Adjust per-corner floor and ceiling voltages so that + * they do not overlap the memory Array Power Mux (APM) + * nor the Memory Accelerator (MEM-ACC) threshold voltages. + */ + if (desc->apm_threshold) + cpr3_restrict_corner(corner, desc->apm_threshold, + desc->apm_hysteresis, + drv->vreg_step); + if (desc->mem_acc_threshold) + cpr3_restrict_corner(corner, desc->mem_acc_threshold, + 0, drv->vreg_step); + + prev_corner = corner; + dev_dbg(drv->dev, "corner %d: [%d %d %d] scaling %d quot %d\n", i, + corner->min_uV, corner->uV, corner->max_uV, scaling, + fuse->quot - corner->quot_adjust); + } + + /* Additional setup for CPRh only */ + if (desc->cpr_type != CTRL_TYPE_CPRH) + return 0; + + /* If the OPPs can't be adjusted, programming the CPRh is useless */ + ret = cprh_corner_adjust_opps(thread); + if (ret) { + dev_err(drv->dev, "Cannot adjust CPU OPP voltages: %d\n", ret); + return ret; + } + + total_corners = thread->num_corners; + extra_corners = drv->extra_corners; + + /* If the APM extra corner exists, add it now. */ + if (desc->apm_crossover && desc->apm_threshold && extra_corners) { + /* Program the APM crossover corner on the CPR-Hardened */ + thread->corners[total_corners].uV = desc->apm_crossover; + thread->corners[total_corners].min_uV = desc->apm_crossover; + thread->corners[total_corners].max_uV = desc->apm_crossover; + thread->corners[total_corners].is_open_loop = true; + + /* + * We have calculated the APM parameters for this clock plan: + * make the APM *threshold* available to external callers. + * The crossover is used only internally in the CPR. + */ + thread->ext_data.apm_threshold_uV = desc->apm_threshold; + + dev_dbg(drv->dev, "corner %d (APM): [%d %d %d] Open-Loop\n", + total_corners, desc->apm_crossover, + desc->apm_crossover, desc->apm_crossover); + + total_corners++; + extra_corners--; + } + + if (desc->mem_acc_threshold && extra_corners) { + /* Program the Memory Accelerator threshold corner to CPRh */ + thread->corners[total_corners].uV = desc->mem_acc_threshold; + thread->corners[total_corners].min_uV = desc->mem_acc_threshold; + thread->corners[total_corners].max_uV = desc->mem_acc_threshold; + thread->corners[total_corners].is_open_loop = true; + + /* + * We have calculated a mem-acc threshold for this clock plan: + * make it available to external callers. + */ + thread->ext_data.mem_acc_threshold_uV = desc->mem_acc_threshold; + + dev_dbg(drv->dev, "corner %d (MEMACC): [%d %d %d] Open-Loop\n", + total_corners, desc->mem_acc_threshold, + desc->mem_acc_threshold, desc->mem_acc_threshold); + + total_corners++; + extra_corners--; + } + + /* + * If there are any extra corners left, it means that even though we + * expect to fill in both APM and MEM-ACC crossovers, one couldn't + * satisfy requirements, which means that the specified parameters + * are wrong: in this case, inform the user and bail out, otherwise + * if we go on writing the (invalid) table to the CPR-Hardened, the + * hardware (in this case, the CPU) will surely freeze and crash. + */ + if (unlikely(extra_corners)) { + dev_err(drv->dev, "APM/MEM-ACC corners: bad parameters.\n"); + return -EINVAL; + } + /* Reassign extra_corners, as we have to exclude delta_quot for them */ + extra_corners = drv->extra_corners; + + /* Disable the interface between OSM and CPRh */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_OSM_ENABLED, 0); + + /* Program the GCNT before unmasking ring oscillator(s) */ + for (i = 0; i < CPR3_RO_COUNT; i++) { + if (!(ring_osc_mask & BIT(i))) { + cpr_write(thread, CPR3_REG_GCNT(i), drv->gcnt); + dev_vdbg(drv->dev, "RO%d gcnt=%d\n", i, drv->gcnt); + } + } + + /* + * Unmask the ring oscillator(s) that we're going to use: it seems + * to be mandatory to do this *before* sending the rest of the + * CPRhardened specific configuration. + */ + dev_dbg(drv->dev, "Unmasking ring oscillators with mask 0x%x\n", ring_osc_mask); + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), ring_osc_mask); + + /* Setup minimum quotients for ring oscillators */ + for (i = 0; i < CPR3_RO_COUNT; i++) { + u32 tgt_quot_reg = CPR3_REG_TARGET_QUOT(tdesc->hw_tid, i); + u32 tgt_quot_val = 0; + + if (!(ring_osc_mask & BIT(i))) + tgt_quot_val = min_quotient; + + cpr_write(thread, tgt_quot_reg, tgt_quot_val); + dev_vdbg(drv->dev, "Programmed min quotient %u for Ring Oscillator %d\n", + tgt_quot_val, tgt_quot_reg); + } + + for (i = 0; i < total_corners; i++) { + int volt_oloop_steps, volt_floor_steps, delta_quot_steps; + int ring_osc; + u32 val; + + fnum = cdata[i].fuse_corner; + fuse = &thread->fuse_corners[fnum]; + + val = thread->corners[i].uV - desc->cpr_base_voltage; + volt_oloop_steps = DIV_ROUND_UP(val, drv->vreg_step); + + val = thread->corners[i].min_uV - desc->cpr_base_voltage; + volt_floor_steps = DIV_ROUND_UP(val, drv->vreg_step); + + /* + * If we are accessing corners that are not used as + * an active DCVS set-point, then always select RO 0 + * and zero out the delta quotient. + */ + if (i >= thread->num_corners) { + ring_osc = 0; + delta_quot_steps = 0; + } else { + ring_osc = fuse->ring_osc_idx; + val = fuse->quot - thread->corners[i].quot_adjust; + val -= min_quotient; + delta_quot_steps = DIV_ROUND_UP(val, + CPRH_DELTA_QUOT_STEP_FACTOR); + } + + if (volt_oloop_steps > CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE || + volt_floor_steps > CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE || + delta_quot_steps > CPRH_CORNER_QUOT_DELTA_MAX_VALUE) { + dev_err(drv->dev, "Invalid cfg: oloop=%d, floor=%d, delta=%d\n", + volt_oloop_steps, volt_floor_steps, + delta_quot_steps); + return -EINVAL; + } + /* Green light: Go, Go, Go! */ + + /* Set number of open-loop steps */ + val = FIELD_PREP(CPRH_CORNER_INIT_VOLTAGE_MASK, volt_oloop_steps); + + /* Set number of floor voltage steps */ + val |= FIELD_PREP(CPRH_CORNER_FLOOR_VOLTAGE_MASK, volt_floor_steps); + + /* Set number of target quotient delta steps */ + val |= FIELD_PREP(CPRH_CORNER_QUOT_DELTA_MASK, delta_quot_steps); + + /* Select ring oscillator for this corner */ + val |= FIELD_PREP(CPRH_CORNER_RO_SEL_MASK, ring_osc); + + /* Open loop corner is usually APM/ACC crossover */ + if (thread->corners[i].is_open_loop) { + dev_dbg(drv->dev, "Disabling Closed-Loop on corner %d\n", i); + val |= CPRH_CORNER_CPR_CL_DISABLE; + } + cpr_write(thread, CPRH_REG_CORNER(drv, tdesc->hw_tid, i), val); + + dev_dbg(drv->dev, "steps [%d]: open-loop %d, floor %d, delta_quot %d\n", + i, volt_oloop_steps, volt_floor_steps, + delta_quot_steps); + } + + /* YAY! Setup is done! Enable the internal loop to start CPR. */ + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, + CPR3_CPR_CTL_LOOP_EN_MASK); + + /* + * All the writes are going through before enabling internal + * communication between the OSM and the CPRh controllers + * because we are never using relaxed accessors, but should + * we use them, it would be critical to issue a barrier here, + * otherwise there is a high risk of hardware lockups due to + * under-voltage for the selected CPU clock. + * + * Please note that the CPR-hardened gets set-up in Linux but + * then gets actually used in firmware (and only by the OSM); + * after handing it off we will have no more control on it. + */ + + /* Enable the interface between OSM and CPRh */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_OSM_ENABLED, + CPRH_CTL_OSM_ENABLED); + + /* On success, free cdata manually */ + devm_kfree(drv->dev, cdata); + + return 0; +} + +/** + * cpr3_init_parameters() - Initialize CPR global parameters + * @drv: Main driver structure + * + * Initial "integrity" checks and setup for the thread-independent parameters. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_init_parameters(struct cpr_drv *drv) +{ + const struct cpr_desc *desc = drv->desc; + struct clk *clk; + + clk = devm_clk_get(drv->dev, NULL); + if (IS_ERR(clk)) { + dev_err(drv->dev, "Couldn't get the reference clock: %ld\n", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + drv->ref_clk_khz = clk_get_rate(clk); + do_div(drv->ref_clk_khz, 1000); + + /* On CPRh this clock is not always-on... */ + if (desc->cpr_type == CTRL_TYPE_CPRH) + clk_prepare_enable(clk); + else + devm_clk_put(drv->dev, clk); + + /* + * Read the CPR version register only from CPR3 onwards: + * this is needed to get the additional register offsets. + * + * Note: When threaded, even if multi-controller, there + * is no chance to have different versions at the + * same time in the same domain, so it is safe to + * check this only on the first controller/thread. + */ + drv->cpr_hw_rev = cpr_read(&drv->threads[0], CPR3_REG_CPR_VERSION); + dev_dbg(drv->dev, "CPR hardware revision: 0x%x\n", drv->cpr_hw_rev); + + if (drv->cpr_hw_rev >= CPRH_CPR_VERSION_4P5) { + drv->reg_corner = 0x3500; + drv->reg_corner_tid = 0xa0; + drv->reg_ctl = 0x3a80; + drv->reg_status = 0x3a84; + } else { + drv->reg_corner = 0x3a00; + drv->reg_corner_tid = 0; + drv->reg_ctl = 0x3aa0; + drv->reg_status = 0x3aa4; + } + + dev_dbg(drv->dev, "up threshold = %u, down threshold = %u\n", + desc->up_threshold, desc->down_threshold); + + return 0; +} + +/** + * cpr3_find_initial_corner() - Finds boot-up p-state and enables CPR + * @thread: Structure holding CPR thread-specific parameters + * + * Differently from CPRv1, from CPRv3 onwards when we successfully find + * the target boot-up performance state, we must refresh the HW + * immediately to guarantee system stability and to avoid overheating + * during the boot process, thing that would more likely happen without + * this driver doing its job. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_find_initial_corner(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + struct corner *corner; + int uV, idx; + + idx = cpr_find_initial_corner(drv->dev, thread->cpu_clk, + thread->corners, + thread->num_corners); + if (idx < 0) + return idx; + + cpr_ctl_disable(thread); + + corner = &thread->corners[idx]; + cpr_corner_restore(thread, corner); + + uV = regulator_get_voltage(drv->vreg); + uV = clamp(uV, corner->min_uV, corner->max_uV); + + corner->last_uV = uV; + if (!drv->last_uV) + drv->last_uV = uV; + + cpr_commit_state(thread); + thread->enabled = true; + cpr_switch(drv); + + return 0; +} + +static const int msm8998_gold_scaling_factor[][CPR3_RO_COUNT] = { + [0] = { + 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631, + 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655 + }, + [1] = { + 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631, + 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655 + }, + [2] = { + 2603, 2755, 2676, 2777, 2573, 2685, 2465, 2610, + 2312, 2423, 2243, 3104, 3022, 3036, 2740, 2303 + }, + [3] = { + 1901, 2016, 2096, 2228, 2034, 2161, 2077, 2188, + 1565, 1870, 1925, 2235, 2205, 2413, 1762, 1478 + } +}; + +static const int msm8998_silver_scaling_factor[][CPR3_RO_COUNT] = { + [0] = { + 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553, + 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945 + }, + [1] = { + 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553, + 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945 + }, + [2] = { + 2391, 2550, 2483, 2638, 2382, 2564, 2259, 2555, + 2766, 3041, 2988, 2935, 2873, 2688, 2013, 2784 + }, + [3] = { + 2066, 2153, 2300, 2434, 2220, 2386, 2288, 2465, + 2028, 2511, 2487, 2734, 2554, 2117, 1892, 2377 + } +}; + +static const struct cpr_thread_desc msm8998_thread_gold = { + .controller_id = 1, + .hw_tid = 0, + .ro_scaling_factor = msm8998_gold_scaling_factor, + .sensor_range_start = 0, + .sensor_range_end = 9, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 9, + .step_quot_init_max = 14, + .num_fuse_corners = 4, + .fuse_corner_data = (struct fuse_corner_data[]){ + [0] = { + .ref_uV = 756000, + .max_uV = 828000, + .min_uV = 568000, + .range_uV = 32000, + .volt_cloop_adjust = 0, + .volt_oloop_adjust = 8000, + .max_volt_scale = 4, + .max_quot_scale = 10, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [1] = { + .ref_uV = 756000, + .max_uV = 900000, + .min_uV = 624000, + .range_uV = 32000, + .volt_cloop_adjust = 0, + .volt_oloop_adjust = 0, + .max_volt_scale = 320, + .max_quot_scale = 350, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [2] = { + .ref_uV = 828000, + .max_uV = 952000, + .min_uV = 632000, + .range_uV = 32000, + .volt_cloop_adjust = 12000, + .volt_oloop_adjust = 12000, + .max_volt_scale = 620, + .max_quot_scale = 750, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [3] = { + .ref_uV = 1056000, + .max_uV = 1136000, + .min_uV = 772000, + .range_uV = 40000, + .volt_cloop_adjust = 50000, + .volt_oloop_adjust = 52000, + .max_volt_scale = 580, + .max_quot_scale = 1040, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_thread_desc msm8998_thread_silver = { + .controller_id = 0, + .hw_tid = 0, + .ro_scaling_factor = msm8998_silver_scaling_factor, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 11, + .step_quot_init_max = 12, + .num_fuse_corners = 4, + .fuse_corner_data = (struct fuse_corner_data[]){ + [0] = { + .ref_uV = 688000, + .max_uV = 828000, + .min_uV = 568000, + .range_uV = 32000, + .volt_cloop_adjust = 20000, + .volt_oloop_adjust = 40000, + .max_volt_scale = 4, + .max_quot_scale = 10, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [1] = { + .ref_uV = 756000, + .max_uV = 900000, + .min_uV = 632000, + .range_uV = 32000, + .volt_cloop_adjust = 26000, + .volt_oloop_adjust = 24000, + .max_volt_scale = 500, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [2] = { + .ref_uV = 828000, + .max_uV = 952000, + .min_uV = 664000, + .range_uV = 32000, + .volt_cloop_adjust = 12000, + .volt_oloop_adjust = 12000, + .max_volt_scale = 280, + .max_quot_scale = 650, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + + }, + [3] = { + .ref_uV = 1056000, + .max_uV = 1056000, + .min_uV = 772000, + .range_uV = 40000, + .volt_cloop_adjust = 30000, + .volt_oloop_adjust = 30000, + .max_volt_scale = 430, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_desc msm8998_cpr_desc = { + .cpr_type = CTRL_TYPE_CPRH, + .num_threads = 2, + .mem_acc_threshold = 852000, + .apm_threshold = 800000, + .apm_crossover = 880000, + .apm_hysteresis = 0, + .cpr_base_voltage = 352000, + .cpr_max_voltage = 1200000, + .timer_delay_us = 5000, + .timer_cons_up = 0, + .timer_cons_down = 2, + .up_threshold = 2, + .down_threshold = 2, + .idle_clocks = 15, + .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN, + .count_repeat = 14, + .gcnt_us = 1, + .vreg_step_fixed = 4000, + .vreg_step_up_limit = 1, + .vreg_step_down_limit = 1, + .vdd_settle_time_us = 34, + .corner_settle_time_us = 6, + .reduce_to_corner_uV = true, + .hw_closed_loop_en = true, + .threads = (const struct cpr_thread_desc *[]) { + &msm8998_thread_silver, + &msm8998_thread_gold, + }, +}; + +static const struct cpr_acc_desc msm8998_cpr_acc_desc = { + .cpr_desc = &msm8998_cpr_desc, +}; + +static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = { + /* Same RO factors for all fuse corners */ + { + 4040, 3230, 0, 2210, 2560, 2450, 2230, 2220, + 2410, 2300, 2560, 2470, 1600, 3120, 2620, 2280 + } +}; + +static const int sdm630_silver_scaling_factor[][CPR3_RO_COUNT] = { + /* Same RO factors for all fuse corners */ + { + 3600, 3600, 3830, 2430, 2520, 2700, 1790, 1760, + 1970, 1880, 2110, 2010, 2510, 4900, 4370, 4780, + } +}; + +static const struct cpr_thread_desc sdm630_thread_gold = { + .controller_id = 0, + .hw_tid = 0, + .ro_scaling_factor = sdm630_gold_scaling_factor, + .ro_scaling_factor_common = true, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 12, + .step_quot_init_max = 14, + .num_fuse_corners = 5, + .fuse_corner_data = (struct fuse_corner_data[]){ + [0] = { + .ref_uV = 644000, + .max_uV = 724000, + .min_uV = 588000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 15000, + .max_volt_scale = 10, + .max_quot_scale = 300, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [1] = { + .ref_uV = 788000, + .max_uV = 788000, + .min_uV = 652000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 5000, + .max_volt_scale = 320, + .max_quot_scale = 275, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [2] = { + .ref_uV = 868000, + .max_uV = 868000, + .min_uV = 712000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 5000, + .max_volt_scale = 350, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [3] = { + .ref_uV = 988000, + .max_uV = 988000, + .min_uV = 784000, + .range_uV = 66000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 868, + .max_quot_scale = 980, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [4] = { + .ref_uV = 1068000, + .max_uV = 1068000, + .min_uV = 844000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 868, + .max_quot_scale = 980, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_thread_desc sdm630_thread_silver = { + .controller_id = 1, + .hw_tid = 0, + .ro_scaling_factor = sdm630_silver_scaling_factor, + .ro_scaling_factor_common = true, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 12, + .step_quot_init_max = 14, + .num_fuse_corners = 3, + .fuse_corner_data = (struct fuse_corner_data[]){ + [0] = { + .ref_uV = 644000, + .max_uV = 724000, + .min_uV = 588000, + .range_uV = 32000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 10, + .max_quot_scale = 360, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [1] = { + .ref_uV = 788000, + .max_uV = 788000, + .min_uV = 652000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 500, + .max_quot_scale = 550, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + [2] = { + .ref_uV = 1068000, + .max_uV = 1068000, + .min_uV = 800000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 2370, + .max_quot_scale = 550, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_desc sdm630_cpr_desc = { + .cpr_type = CTRL_TYPE_CPRH, + .num_threads = 2, + .apm_threshold = 872000, + .apm_crossover = 872000, + .apm_hysteresis = 20000, + .cpr_base_voltage = 400000, + .cpr_max_voltage = 1300000, + .timer_delay_us = 5000, + .timer_cons_up = 0, + .timer_cons_down = 2, + .up_threshold = 2, + .down_threshold = 2, + .idle_clocks = 15, + .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN, + .count_repeat = 14, + .gcnt_us = 1, + .vreg_step_fixed = 4000, + .vreg_step_up_limit = 1, + .vreg_step_down_limit = 1, + .vdd_settle_time_us = 34, + .corner_settle_time_us = 5, + .reduce_to_corner_uV = true, + .hw_closed_loop_en = true, + .threads = (const struct cpr_thread_desc *[]) { + &sdm630_thread_gold, + &sdm630_thread_silver, + }, +}; + +static const struct cpr_acc_desc sdm630_cpr_acc_desc = { + .cpr_desc = &sdm630_cpr_desc, +}; + +static int cpr_power_off(struct generic_pm_domain *domain) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + + return cpr_disable(thread); +} + +static int cpr_power_on(struct generic_pm_domain *domain) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + + return cpr_enable(thread); +} + +static void cpr_pd_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + + guard(mutex)(&drv->lock); + + dev_dbg(drv->dev, "detach callback for: %s\n", dev_name(dev)); + thread->attached_cpu_dev = NULL; +} + +static int cpr_pd_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + const struct acc_desc *acc_desc = drv->acc_desc; + bool cprh_opp_remove_table = false; + int ret = 0; + + guard(mutex)(&drv->lock); + + dev_dbg(drv->dev, "attach callback for: %s\n", dev_name(dev)); + + /* + * This driver only supports scaling voltage for a CPU cluster + * where all CPUs in the cluster share a single regulator. + * Therefore, save the struct device pointer only for the first + * CPU device that gets attached. There is no need to do any + * additional initialization when further CPUs get attached. + * This is not an error condition. + */ + if (thread->attached_cpu_dev) + return 0; + + /* + * cpr_scale_voltage() requires the direction (if we are changing + * to a higher or lower OPP). The first time + * cpr_set_performance_state() is called, there is no previous + * performance state defined. Therefore, we call + * cpr_find_initial_corner() that gets the CPU clock frequency + * set by the bootloader, so that we can determine the direction + * the first time cpr_set_performance_state() is called. + */ + thread->cpu_clk = devm_clk_get(dev, NULL); + if (drv->desc->cpr_type != CTRL_TYPE_CPRH && IS_ERR(thread->cpu_clk)) { + ret = PTR_ERR(thread->cpu_clk); + if (ret != -EPROBE_DEFER) + dev_err(drv->dev, "could not get cpu clk: %d\n", ret); + return ret; + } + thread->attached_cpu_dev = dev; + + /* + * We are exporting the APM and MEM-ACC thresholds to the caller; + * while APM is necessary in the CPU CPR case, MEM-ACC may not be, + * depending on the SoC and on fuses. + * Initialize both to an invalid value, so that the caller can check + * if they got calculated or read from fuses in this driver. + */ + thread->ext_data.apm_threshold_uV = -1; + thread->ext_data.mem_acc_threshold_uV = -1; + dev_set_drvdata(thread->attached_cpu_dev, &thread->ext_data); + + dev_dbg(drv->dev, "using cpu clk from: %s\n", + dev_name(thread->attached_cpu_dev)); + + /* + * Everything related to (virtual) corners has to be initialized + * here, when attaching to the power domain, since we need to know + * the maximum frequency for each fuse corner, and this is only + * available after the cpufreq driver has attached to us. + * The reason for this is that we need to know the highest + * frequency associated with each fuse corner. + */ + ret = dev_pm_opp_get_opp_count(&thread->pd.dev); + if (ret < 0) { + dev_err(drv->dev, "could not get OPP count\n"); + thread->attached_cpu_dev = NULL; + return ret; + } + thread->num_corners = ret; + + thread->corners = devm_kcalloc(drv->dev, + thread->num_corners + + drv->extra_corners, + sizeof(*thread->corners), + GFP_KERNEL); + if (!thread->corners) + return -ENOMEM; + + /* + * If we are on CPR-Hardened we have to make sure that the attached + * device has a OPP table installed, as we're going to modify it here + * with our calculations based on qfprom values. + */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) { + ret = dev_pm_opp_of_add_table(dev); + if (ret && ret != -EEXIST) { + dev_err(drv->dev, "Cannot add table: %d\n", ret); + return ret; + } + cprh_opp_remove_table = true; + } + + ret = cpr3_corner_init(thread); + if (ret) { + /* + * If we are on CPRh and we reached an error condition, we installed + * the OPP table but we haven't done any setup on it, nor we ever will. + * In order to leave a clean state, remove the table. + */ + if (cprh_opp_remove_table) + dev_pm_opp_of_remove_table(thread->attached_cpu_dev); + + return dev_err_probe(dev, ret, "Couldn't initialize corners\n"); + } + + if (drv->desc->cpr_type != CTRL_TYPE_CPRH) { + ret = cpr3_find_initial_corner(thread); + if (ret) + return dev_err_probe(dev, ret, "Couldn't find initial corner\n"); + + if (acc_desc && acc_desc->config) + regmap_multi_reg_write(drv->tcsr, acc_desc->config, + acc_desc->num_regs_per_fuse); + + /* Enable ACC if required */ + if (acc_desc && acc_desc->enable_mask) + regmap_set_bits(drv->tcsr, acc_desc->enable_reg, + acc_desc->enable_mask); + } + dev_info(drv->dev, "thread %d initialized with %u OPPs\n", + thread->id, thread->num_corners); + + return ret; +} + +static int cpr3_debug_info_show(struct seq_file *s, void *unused) +{ + struct cpr_thread *thread = s->private; + struct fuse_corner *fuse = thread->fuse_corners; + struct corner *corner = thread->corners; + u32 tid = thread->desc->hw_tid; + u32 ctl, irq_status, reg; + unsigned int i; + + if (thread->drv->desc->cpr_type != CTRL_TYPE_CPRH) { + seq_printf(s, "current_volt = %d uV\n", thread->drv->last_uV); + seq_printf(s, "requested voltage: %d uV\n", thread->corner->last_uV); + } + + irq_status = cpr_read(thread, CPR3_REG_IRQ_STATUS); + seq_printf(s, "irq_status = 0x%x\n", irq_status); + + ctl = cpr_read(thread, CPR3_REG_CPR_CTL); + seq_printf(s, "cpr_ctl = 0x%x\n", ctl); + + seq_printf(s, "thread %d - hw tid: %u - enabled: %d:\n", + thread->id, thread->desc->hw_tid, thread->enabled); + seq_printf(s, "%d corners, derived from %d fuse corners\n", + thread->num_corners, thread->desc->num_fuse_corners); + + + /* The corners have not been initialized yet. */ + if (!thread->num_corners) + return 0; + + for (i = 0; i < thread->num_corners; i++, corner++) + seq_printf(s, "corner %d - uV=[%d %d %d] quot=%d freq=%llu\n", + i, corner->min_uV, corner->uV, corner->max_uV, + corner->quot_adjust, corner->freq); + + for (i = 0; i < thread->desc->num_fuse_corners; i++, fuse++) + seq_printf(s, "fuse %d - uV=[%d %d %d] quot=%d freq=%llu\n", + i, fuse->min_uV, fuse->uV, fuse->max_uV, + fuse->quot, corner->freq); + + reg = cpr_read(thread, CPR3_REG_RESULT0(tid)); + seq_printf(s, "cpr_result_0 = 0x%x\n [", reg); + seq_printf(s, "busy = %lu, ", FIELD_GET(CPR3_RESULT0_BUSY_MASK, reg)); + seq_printf(s, "step_dn = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_DN_MASK, reg)); + seq_printf(s, "step_up = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_UP_MASK, reg)); + seq_printf(s, "error_steps = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, reg)); + seq_printf(s, "error = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_MASK, reg)); + seq_printf(s, "negative = %lu", FIELD_GET(CPR3_RESULT0_NEG_MASK, reg)); + seq_puts(s, "]\n"); + + reg = cpr_read(thread, CPR3_REG_RESULT1(tid)); + seq_printf(s, "cpr_result_1 = 0x%x\n [", reg); + seq_printf(s, "quot_min = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MIN_MASK, reg)); + seq_printf(s, "quot_max = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MAX_MASK, reg)); + seq_printf(s, "ro_min = %lu, ", FIELD_GET(CPR3_RESULT1_RO_MIN_MASK, reg)); + seq_printf(s, "ro_max = %lu", FIELD_GET(CPR3_RESULT1_RO_MAX_MASK, reg)); + seq_puts(s, "]\n"); + + reg = cpr_read(thread, CPR3_REG_RESULT2(tid)); + seq_printf(s, "cpr_result_2 = 0x%x\n [", reg); + seq_printf(s, "qout_step_min = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MIN_MASK, reg)); + seq_printf(s, "qout_step_max = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MAX_MASK, reg)); + seq_printf(s, "sensor_min = %lu, ", FIELD_GET(CPR3_RESULT2_SENSOR_MIN_MASK, reg)); + seq_printf(s, "sensor_max = %lu", FIELD_GET(CPR3_RESULT2_SENSOR_MAX_MASK, reg)); + seq_puts(s, "]\n"); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(cpr3_debug_info); + +static void cpr3_debugfs_init(struct cpr_drv *drv) +{ + int i; + + drv->debugfs = debugfs_create_dir("qcom_cpr3", NULL); + + for (i = 0; i < drv->desc->num_threads; i++) { + char buf[50]; + + snprintf(buf, sizeof(buf), "thread%d", i); + + debugfs_create_file(buf, 0444, drv->debugfs, &drv->threads[i], + &cpr3_debug_info_fops); + } +} + +/** + * cpr_thread_init() - Initialize CPR thread related parameters + * @drv: Main driver structure + * @tid: Thread ID + * + * Return: Zero for success, negative number on error + */ +static int cpr_thread_init(struct cpr_drv *drv, int tid) +{ + const struct cpr_desc *desc = drv->desc; + const struct cpr_thread_desc *tdesc = desc->threads[tid]; + struct cpr_thread *thread = &drv->threads[tid]; + bool pd_registered = false; + int ret, i; + + thread->id = tid; + thread->drv = drv; + thread->desc = tdesc; + thread->fuse_corners = devm_kcalloc(drv->dev, + tdesc->num_fuse_corners + + drv->extra_corners, + sizeof(*thread->fuse_corners), + GFP_KERNEL); + if (!thread->fuse_corners) + return -ENOMEM; + + thread->cpr_fuses = cpr_get_fuses(drv->dev, tid, + tdesc->num_fuse_corners); + if (IS_ERR(thread->cpr_fuses)) + return PTR_ERR(thread->cpr_fuses); + + ret = cpr_populate_ring_osc_idx(thread->drv->dev, thread->fuse_corners, + thread->cpr_fuses, + tdesc->num_fuse_corners); + if (ret) + return ret; + + ret = cpr_fuse_corner_init(thread); + if (ret) + return ret; + + thread->pd.name = devm_kasprintf(drv->dev, GFP_KERNEL, + "%s_thread%d", + drv->dev->of_node->full_name, + thread->id); + if (!thread->pd.name) + return -EINVAL; + + thread->pd.power_off = cpr_power_off; + thread->pd.power_on = cpr_power_on; + thread->pd.attach_dev = cpr_pd_attach_dev; + thread->pd.detach_dev = cpr_pd_detach_dev; + + /* CPR-Hardened performance states are managed in firmware */ + if (desc->cpr_type == CTRL_TYPE_CPRH) + thread->pd.set_performance_state = cprh_dummy_set_performance_state; + else + thread->pd.set_performance_state = cpr_set_performance_state; + + /* Anything later than CPR1 must be always-on for now */ + thread->pd.flags = GENPD_FLAG_ALWAYS_ON; + + drv->cell_data.domains[tid] = &thread->pd; + + ret = pm_genpd_init(&thread->pd, NULL, false); + if (ret < 0) + goto fail; + else + pd_registered = true; + + /* On CPRhardened, the interrupts are managed in firmware */ + if (desc->cpr_type != CTRL_TYPE_CPRH) { + INIT_WORK(&thread->restart_work, cpr_restart_worker); + + ret = devm_request_threaded_irq(drv->dev, drv->irq, + NULL, cpr_irq_handler, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING, + "cpr", drv); + if (ret) + goto fail; + } + + return 0; + +fail: + /* Unregister all previously registered genpds */ + for (i = tid - pd_registered; i >= 0; i--) + pm_genpd_remove(&drv->threads[i].pd); + + return ret; +} + +/** + * cpr3_resources_init() - Initialize resources used by this driver + * @pdev: Platform device + * @drv: Main driver structure + * + * Return: Zero for success, negative number on error + */ +static int cpr3_resources_init(struct platform_device *pdev, + struct cpr_drv *drv) +{ + const struct cpr_desc *desc = drv->desc; + struct cpr_thread *threads = drv->threads; + unsigned int i; + u8 cid_mask = 0; + + /* + * Here, we are accounting for the following usecases: + * - One controller + * - One or multiple threads on the same iospace + * + * - Multiple controllers + * - Each controller has its own iospace and each + * may have one or multiple threads in their + * parent controller's iospace + * + * Then, to avoid complicating the code for no reason, + * this also needs a mandatory order in the list of + * threads which implies that all of them from the same + * controllers are specified sequentially. As an example: + * + * C0-T0, C0-T1...C0-Tn, C1-T0, C1-T1...C1-Tn + */ + for (i = 0; i < desc->num_threads; i++) { + u8 cid = desc->threads[i]->controller_id; + + if (cid_mask & BIT(cid)) { + if (desc->threads[i - 1]->controller_id != cid) { + dev_err(drv->dev, "Bad threads order. Please fix!\n"); + return -EINVAL; + } + threads[i].base = threads[i - 1].base; + continue; + } + threads[i].base = devm_platform_ioremap_resource(pdev, cid); + if (IS_ERR(threads[i].base)) + return PTR_ERR(threads[i].base); + cid_mask |= BIT(cid); + } + return 0; +} + +static int cpr_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cpr_drv *drv; + const struct cpr_desc *desc; + const struct cpr_acc_desc *data; + struct device_node *np; + unsigned int i; + int ret; + + data = of_device_get_match_data(dev); + if (!data || !data->cpr_desc) + return dev_err_probe(dev, -EINVAL, "Couldn't get match data\n"); + + desc = data->cpr_desc; + + /* CPRh disallows MEM-ACC access from the HLOS */ + if (!(data->acc_desc || desc->cpr_type == CTRL_TYPE_CPRH)) + return dev_err_probe(dev, -EINVAL, "Invalid ACC data\n"); + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + drv->dev = dev; + drv->desc = desc; + drv->threads = devm_kcalloc(dev, desc->num_threads, + sizeof(*drv->threads), GFP_KERNEL); + if (!drv->threads) + return -ENOMEM; + + drv->cell_data.num_domains = desc->num_threads; + drv->cell_data.domains = devm_kcalloc(drv->dev, + drv->cell_data.num_domains, + sizeof(*drv->cell_data.domains), + GFP_KERNEL); + if (!drv->cell_data.domains) + return -ENOMEM; + + mutex_init(&drv->lock); + + if (data->acc_desc) { + drv->acc_desc = data->acc_desc; + + np = of_parse_phandle(dev->of_node, "qcom,acc", 0); + if (!np) + return dev_err_probe(dev, -ENODEV, "Couldn't get ACC phandle\n"); + + drv->tcsr = syscon_node_to_regmap(np); + of_node_put(np); + if (IS_ERR(drv->tcsr)) + return dev_err_probe(dev, PTR_ERR(drv->tcsr), + "Couldn't get regmap from ACC\n"); + } + + ret = cpr3_resources_init(pdev, drv); + if (ret) + return dev_err_probe(dev, ret, "Couldn't initialize CPR resources\n"); + + drv->irq = platform_get_irq_optional(pdev, 0); + if (desc->cpr_type != CTRL_TYPE_CPRH && drv->irq < 0) + return dev_err_probe(dev, -EINVAL, "Couldn't get IRQ\n"); + + /* On CPRhardened, vreg access it not allowed */ + drv->vreg = devm_regulator_get_optional(dev, "vdd"); + if (desc->cpr_type != CTRL_TYPE_CPRH && IS_ERR(drv->vreg)) + return dev_err_probe(dev, PTR_ERR(drv->vreg), "Couldn't get regulator\n"); + + /* + * On at least CPRhardened, vreg is unaccessible and there is no + * way to read linear step from that regulator, hence it is hardcoded + * in the driver; + * When the vreg_step is not declared in the cpr data (or is zero), + * then having access to the vreg regulator is mandatory, as this + * will be retrieved through the regulator API. + */ + if (desc->vreg_step_fixed) + drv->vreg_step = desc->vreg_step_fixed; + else + drv->vreg_step = regulator_get_linear_step(drv->vreg); + + if (!drv->vreg_step) + return dev_err_probe(dev, -EINVAL, "Couldn't get regulator step\n"); + + /* + * Initialize fuse corners, since it simply depends + * on data in efuses. + * Everything related to (virtual) corners has to be + * initialized after attaching to the power domain, + * since it depends on the CPU's OPP table. + */ + ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &drv->fusing_rev); + if (ret) + return dev_err_probe(dev, ret, "Couldn't get revision fuse\n"); + + ret = nvmem_cell_read_variable_le_u32(dev, "cpr_speed_bin", &drv->speed_bin); + if (ret) + return dev_err_probe(dev, ret, "Couldn't get speedbin fuse\n"); + + /* + * Some SoCs require extra corners for MEM-ACC or APM: if + * the related parameters have been specified, then reserve + * a corner for the APM and/or MEM-ACC crossover, used by + * OSM and CPRh HW to set the supply voltage during the APM + * and/or MEM-ACC switch routine. + */ + if (desc->cpr_type == CTRL_TYPE_CPRH) { + if (desc->apm_crossover && desc->apm_hysteresis >= 0) + drv->extra_corners++; + + if (desc->mem_acc_threshold) + drv->extra_corners++; + } + + /* Initialize all threads */ + for (i = 0; i < desc->num_threads; i++) { + ret = cpr_thread_init(drv, i); + if (ret) + return dev_err_probe(dev, ret, "Couldn't initialize CPR threads\n"); + } + + /* Initialize global parameters */ + ret = cpr3_init_parameters(drv); + if (ret) + goto unreg_genpd; + + /* Write initial configuration on all threads */ + for (i = 0; i < desc->num_threads; i++) { + ret = cpr_configure(&drv->threads[i]); + if (ret) + goto unreg_genpd; + } + + ret = of_genpd_add_provider_onecell(dev->of_node, &drv->cell_data); + if (ret) + goto unreg_genpd; + + platform_set_drvdata(pdev, drv); + cpr3_debugfs_init(drv); + + return 0; + +unreg_genpd: + /* Clean up genpds */ + for (i = desc->num_threads - 1; i >= 0; i--) + pm_genpd_remove(&drv->threads[i].pd); + + return dev_err_probe(dev, ret, "Error initializing CPR\n"); +} + +static void cpr_remove(struct platform_device *pdev) +{ + struct cpr_drv *drv = platform_get_drvdata(pdev); + int i; + + of_genpd_del_provider(pdev->dev.of_node); + + for (i = 0; i < drv->desc->num_threads; i++) { + cpr_ctl_disable(&drv->threads[i]); + cpr_irq_set(&drv->threads[i], 0); + pm_genpd_remove(&drv->threads[i].pd); + } + + debugfs_remove_recursive(drv->debugfs); +} + +static const struct of_device_id cpr3_match_table[] = { + { .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc }, + { .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc }, + { } +}; +MODULE_DEVICE_TABLE(of, cpr3_match_table); + +static struct platform_driver cpr3_driver = { + .probe = cpr_probe, + .remove = cpr_remove, + .driver = { + .name = "qcom-cpr3", + .of_match_table = cpr3_match_table, + }, +}; +module_platform_driver(cpr3_driver) + +MODULE_DESCRIPTION("Core Power Reduction (CPR) v3/v4 driver"); +MODULE_LICENSE("GPL"); diff --git a/include/soc/qcom/cpr.h b/include/soc/qcom/cpr.h new file mode 100644 index 000000000000..2ba4324d18f6 --- /dev/null +++ b/include/soc/qcom/cpr.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2019 Linaro Limited + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +#ifndef __CPR_H__ +#define __CPR_H__ + +struct cpr_ext_data { + int mem_acc_threshold_uV; + int apm_threshold_uV; +}; + +#endif /* __CPR_H__ */ From patchwork Mon Jul 8 12:22:41 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13726579 Received: from mail-lf1-f44.google.com (mail-lf1-f44.google.com [209.85.167.44]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3892813DBAC for ; Mon, 8 Jul 2024 12:23:23 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.44 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441405; cv=none; b=soF6NghfK/gdOR7FHR9V9HDPkBfwihW6spuhqkL6uk2wrj3HUHxmqKseRuTbTLtfiWDsdw5bP7I5kxRf0mbGogVlO2gcqLlQRjZOB7TPtnB5MFt1HZe9IW4rMDUSoWEVL58JE4hmPMy0fQReoYt2IayqiM2JVl1GkSdy9DaS8+c= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720441405; c=relaxed/simple; bh=U5O4I1BycNTZgBsVof/ETOs7kY/AKAUuAG5BawDgWe4=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=RXQs624Wlrg4W9y28OIMoBeXHrOum+K7Lc6xRl++PwOvE5Bvt61zwgIq7xBQdaGomX9fNkTwinC6sfxP9kPO3S+A835i3RIyUJaZLSyICiS//3FHU5DIyb9yh6tDgC5N/DDClTHjWbmWKQqgHzVY+TNw9b0YXTOBj5TskQlKKI4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=IAhC7/JH; arc=none smtp.client-ip=209.85.167.44 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="IAhC7/JH" Received: by mail-lf1-f44.google.com with SMTP id 2adb3069b0e04-52ea5dc3c66so4788295e87.3 for ; Mon, 08 Jul 2024 05:23:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1720441401; x=1721046201; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=PjDUABUK3xx+ytWh0W8WQWs64uvDq8uBEyIiDbivdvU=; b=IAhC7/JHAr/inh1sdYS6/PbnifAxQg8A9fOJDTVV1HPo8MdamuYws/w8e/ubsqSOHj Fc6Q18tka3c5E+t9Dh/zU6uH2fgZWJmMfYuTyUk5IpqG/7EUeOSe9K9D7VHN4nKu4bpl wQMBzcZpFB8hV/No0tRGXCJYAFjj457HL6lzAM1LtBYKv/rtN/J8kMhtgtr1PzBQ1hFP +RngQjTlxKqCTMzKZZtMKfI8RwY5+3AjzT05zevgeL6v9SuNlLEJVaTuxHIzcWG0bLKv h5sU1X+4CEhVQXW5/xcGx/KfSdNRjZiqHoNli7DneML87gJI20xwBZ8WLmnynfYHjPBs +oxA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720441401; x=1721046201; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=PjDUABUK3xx+ytWh0W8WQWs64uvDq8uBEyIiDbivdvU=; b=kzj3PboU82UIbpGs0G9zkVq0gCoWrCdIoOA1gb2TITHjXRhA0gUCzWfHTwH2+RwT9Y TD9wWR7yDAjchUxzBUlw+9KsSomCtPvFbqZLCpAktsbMniOD2mfhj3J/dNeTTemZ1APx df1oATpfCfhoHUr2v9WkgYXnBRQn/RAZMinK09uGHye0/0Cvyj4FMCCQXzo3xGvAlFBz bUe2H0SIc/se9cN6hgT2+L9vxOQi9WembE62DlCORYbnAlEhTxeohcxKX4+23kISsSd3 10+l3lR3RY6nh3KI73t+nBfCvnsxUb9yMh9Fz4H7OQlokiE1o/tRHAbV4sXn4EaWQJO9 gYdg== X-Forwarded-Encrypted: i=1; AJvYcCWcDhyS7VJsa/mZ8Azuu9XuNpAYJ31XAsEZSJrDg87C6s6C+DhwVjkcPAks3EZwSl4dc3qq57rDewfHaDOal9gkIwAPMf2/CtRQECcojg== X-Gm-Message-State: AOJu0YxAwZ5El0nDceff7Y9HBz9wR9LnEG1uHvyBny5wnnE1YvIJDZ1m Q5DHVZR/UbWpxZ7HjuNgK2qpu4PS19/afPNbctbhMauvzpb0PeuhDa3WnqzjH+k= X-Google-Smtp-Source: AGHT+IF6aJUScrnUHLCSNDQgFomku9MLgY24W6AhtGmQFuzrXH91AuQAefQTBlXfrNEwpU80dUhwZQ== X-Received: by 2002:ac2:4ed0:0:b0:52e:9904:71e with SMTP id 2adb3069b0e04-52ea062ac85mr9529332e87.28.1720441400257; Mon, 08 Jul 2024 05:23:20 -0700 (PDT) Received: from [192.168.105.194] (078088045245.garwolin.vectranet.pl. [78.88.45.245]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a77e52ccf19sm208983666b.147.2024.07.08.05.23.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 Jul 2024 05:23:19 -0700 (PDT) From: Konrad Dybcio Date: Mon, 08 Jul 2024 14:22:41 +0200 Subject: [PATCH v15 10/10] arm64: dts: qcom: msm8998: Configure CPRh Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240708-topic-cpr3h-v15-10-5bc8b8936489@linaro.org> References: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> In-Reply-To: <20240708-topic-cpr3h-v15-0-5bc8b8936489@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson , Rob Herring , Krzysztof Kozlowski Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , Varadarajan Narayanan , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720441372; l=20951; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=5x045ydwpU33EuZqCL8pyoFFUMu40vCZUOwz6198gVg=; b=kkazzRzQyJWRsKW5GK0NpfpbvemhnkGDteMxIazt4gVJGx/j2BXubtAK5oH9dwU+T2gFE/j/7 8XVDWurZAznAn2mvzcOdl8XxUokmQElOtinAuAMkfXJwIRjJOa4EwR+ X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= From: AngeloGioacchino Del Regno Now that the CPR v3/v4/Hardened is ready, enable it on MSM8998. [Konrad: separate from adding cpufreq, sort nodes, use lowercase hex, update for driver changes] Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 760 ++++++++++++++++++++++++++++++++++ 1 file changed, 760 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3c94d823a514..f966d37ac0d5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -144,6 +144,10 @@ CPU0: cpu@0 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "perf"; + L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -159,6 +163,9 @@ CPU1: cpu@1 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "perf"; }; CPU2: cpu@2 { @@ -169,6 +176,9 @@ CPU2: cpu@2 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "perf"; }; CPU3: cpu@3 { @@ -179,6 +189,9 @@ CPU3: cpu@3 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "perf"; }; CPU4: cpu@100 { @@ -189,6 +202,10 @@ CPU4: cpu@100 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "perf"; + L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -204,6 +221,9 @@ CPU5: cpu@101 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "perf"; }; CPU6: cpu@102 { @@ -214,6 +234,9 @@ CPU6: cpu@102 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "perf"; }; CPU7: cpu@103 { @@ -224,6 +247,9 @@ CPU7: cpu@103 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "perf"; }; cpu-map { @@ -317,6 +343,491 @@ scm { }; }; + cprh_opp_table: opp-table-cprh { + compatible = "operating-points-v2-qcom-level"; + opp-shared; + + cprh_opp1: opp-1 { + opp-level = <1>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp2: opp-2 { + opp-level = <2>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp3: opp-3 { + opp-level = <3>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp4: opp-4 { + opp-level = <4>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp5: opp-5 { + opp-level = <5>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp6: opp-6 { + opp-level = <6>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp7: opp-7 { + opp-level = <7>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp8: opp-8 { + opp-level = <8>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp9: opp-9 { + opp-level = <9>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp10: opp-10 { + opp-level = <10>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp11: opp-11 { + opp-level = <11>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp12: opp-12 { + opp-level = <12>; + qcom,opp-fuse-level = <3 2>; + qcom,opp-cloop-vadj = <(-10000) (-10000)>; + qcom,opp-oloop-vadj = <(-12000) (-8000)>; + }; + + cprh_opp13: opp-13 { + opp-level = <13>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-11000) (-10000)>; + qcom,opp-oloop-vadj = <(-16000) (-16000)>; + }; + + cprh_opp14: opp-14 { + opp-level = <14>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-12000) (-11000)>; + qcom,opp-oloop-vadj = <(-16000) (-12000)>; + }; + + cprh_opp15: opp-15 { + opp-level = <15>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-13000) (-12000)>; + qcom,opp-oloop-vadj = <(-12000) (-16000)>; + }; + + cprh_opp16: opp-16 { + opp-level = <16>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-14000) (-12000)>; + qcom,opp-oloop-vadj = <(-12000) (-16000)>; + }; + + cprh_opp17: opp-17 { + opp-level = <17>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-14000) (-13000)>; + qcom,opp-oloop-vadj = <(-16000) (-12000)>; + }; + + cprh_opp18: opp-18 { + opp-level = <18>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-15000) (-14000)>; + qcom,opp-oloop-vadj = <(-16000) (-16000)>; + }; + + cprh_opp19: opp-19 { + opp-level = <19>; + qcom,opp-fuse-level = <4 3>; + qcom,opp-cloop-vadj = <(-21000) (-14000)>; + qcom,opp-oloop-vadj = <(-20000) (-16000)>; + }; + + cprh_opp20: opp-20 { + opp-level = <20>; + qcom,opp-fuse-level = <4 3>; + qcom,opp-cloop-vadj = <(-24000) (-15000)>; + qcom,opp-oloop-vadj = <(-24000) (-16000)>; + }; + + cprh_opp21: opp-21 { + opp-level = <21>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <(-26000) (-16000)>; + qcom,opp-oloop-vadj = <(-28000) (-24000)>; + }; + + cprh_opp22: opp-22 { + opp-level = <22>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <(-28000) (-16000)>; + qcom,opp-oloop-vadj = <(-28000) (-16000)>; + }; + + cprh_opp23: opp-23 { + opp-level = <23>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-17000)>; + qcom,opp-oloop-vadj = <0 (-20000)>; + }; + + cprh_opp24: opp-24 { + opp-level = <24>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-15000)>; + qcom,opp-oloop-vadj = <0 (-16000)>; + }; + + cprh_opp25: opp-25 { + opp-level = <25>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-14000)>; + qcom,opp-oloop-vadj = <0 (-12000)>; + }; + + cprh_opp26: opp-26 { + opp-level = <26>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-27000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp27: opp-27 { + opp-level = <27>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-27000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp28: opp-28 { + opp-level = <28>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp29: opp-29 { + opp-level = <29>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp30: opp-30 { + opp-level = <30>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + required-opps = <&cprh_opp22>; + }; + + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + required-opps = <&cprh_opp21>; + }; + + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + required-opps = <&cprh_opp20>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + required-opps = <&cprh_opp19>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&cprh_opp18>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + required-opps = <&cprh_opp17>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cprh_opp16>; + }; + + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + required-opps = <&cprh_opp15>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cprh_opp14>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + required-opps = <&cprh_opp13>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cprh_opp12>; + }; + + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + required-opps = <&cprh_opp11>; + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + required-opps = <&cprh_opp10>; + }; + + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + required-opps = <&cprh_opp9>; + }; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + required-opps = <&cprh_opp8>; + }; + + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + required-opps = <&cprh_opp7>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + required-opps = <&cprh_opp6>; + }; + + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + required-opps = <&cprh_opp5>; + }; + + opp-518400000 { + opp-hz = /bits/ 64 <518400000>; + required-opps = <&cprh_opp4>; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + required-opps = <&cprh_opp3>; + }; + + opp-364800000 { + opp-hz = /bits/ 64 <364800000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + required-opps = <&cprh_opp30>; + }; + + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + required-opps = <&cprh_opp29>; + }; + + opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + required-opps = <&cprh_opp28>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + required-opps = <&cprh_opp27>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + required-opps = <&cprh_opp26>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + required-opps = <&cprh_opp25>; + }; + + opp-2035200000 { + opp-hz = /bits/ 64 <2035200000>; + required-opps = <&cprh_opp24>; + }; + + opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + required-opps = <&cprh_opp23>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + required-opps = <&cprh_opp22>; + }; + + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + required-opps = <&cprh_opp21>; + }; + + opp-1728000000 { + opp-hz = /bits/ 64 <1728000000>; + required-opps = <&cprh_opp20>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + required-opps = <&cprh_opp19>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + required-opps = <&cprh_opp18>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&cprh_opp17>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + required-opps = <&cprh_opp16>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + required-opps = <&cprh_opp15>; + }; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + required-opps = <&cprh_opp14>; + }; + + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + required-opps = <&cprh_opp13>; + }; + + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + required-opps = <&cprh_opp12>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + required-opps = <&cprh_opp11>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + required-opps = <&cprh_opp10>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + required-opps = <&cprh_opp9>; + }; + + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + required-opps = <&cprh_opp8>; + }; + + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + required-opps = <&cprh_opp7>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + required-opps = <&cprh_opp6>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&cprh_opp5>; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + required-opps = <&cprh_opp4>; + }; + + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + required-opps = <&cprh_opp3>; + }; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + dsi_opp_table: opp-table-dsi { compatible = "operating-points-v2"; @@ -852,6 +1363,174 @@ qfprom: qfprom@784000 { #address-cells = <1>; #size-cells = <1>; + cpr_efuse_speedbin: speedbin@133 { + reg = <0x133 0x8>; + bits = <5 3>; + }; + + cpr_fuse_revision: cpr-fusing-rev@13e { + reg = <0x13e 0x1>; + bits = <3 3>; + }; + + /* CPR Ring Oscillator: Power Cluster */ + cpr_ro_sel3_pwrcl: rosel3-pwrcl@218 { + reg = <0x218 0x1>; + bits = <0 4>; + }; + + cpr_ro_sel2_pwrcl: rosel2-pwrcl@218 { + reg = <0x218 0x1>; + bits = <4 4>; + }; + + cpr_ro_sel1_pwrcl: rosel1-pwrcl@219 { + reg = <0x219 0x1>; + bits = <0 4>; + }; + + cpr_ro_sel0_pwrcl: rosel0-pwrcl@219 { + reg = <0x219 0x1>; + bits = <4 4>; + }; + + /* CPR Init Voltage: Power Cluster */ + cpr_init_voltage3_pwrcl: ivolt3-pwrcl@21a { + reg = <0x21a 0x1>; + bits = <0 6>; + }; + + cpr_init_voltage2_pwrcl: ivolt2-pwrcl@21a { + reg = <0x21a 0x2>; + bits = <6 6>; + }; + + cpr_init_voltage1_pwrcl: ivolt1-pwrcl@21b { + reg = <0x21b 0x2>; + bits = <4 6>; + }; + + cpr_init_voltage0_pwrcl: ivolt0-pwrcl@21c { + reg = <0x21c 0x1>; + bits = <2 6>; + }; + + /* CPR Target Quotients: Power Cluster */ + cpr_quot3_pwrcl: quot3-pwrcl@21d { + reg = <0x21d 0x3>; + bits = <6 12>; + }; + + cpr_quot2_pwrcl: quot2-pwrcl@21f { + reg = <0x21f 0x2>; + bits = <2 11>; + }; + + cpr_quot1_pwrcl: quot1-pwrcl@220 { + reg = <0x220 0x3>; + bits = <6 12>; + }; + + cpr_quot0_pwrcl: quot0-pwrcl@222 { + reg = <0x222 0x2>; + bits = <2 12>; + }; + + /* CPR Quotient Offsets: Power Cluster */ + cpr_quot_offset3_pwrcl: qoff3-pwrcl@226 { + reg = <0x226 0x1>; + bits = <1 7>; + }; + + cpr_quot_offset2_pwrcl: qoff2-pwrcl@227 { + reg = <0x227 0x1>; + bits = <0 7>; + }; + + cpr_quot_offset1_pwrcl: qoff1-pwrcl@227 { + reg = <0x227 0x2>; + bits = <7 6>; + }; + + /* CPR Ring Oscillator: Performance Cluster */ + cpr_ro_sel3_perfcl: rosel3-perfcl@229 { + reg = <0x229 0x2>; + bits = <6 4>; + }; + + cpr_ro_sel2_perfcl: rosel2-perfcl@22a { + reg = <0x22a 0x1>; + bits = <2 4>; + }; + + cpr_ro_sel1_perfcl: rosel1-perfcl@22a { + reg = <0x22a 0x2>; + bits = <6 4>; + }; + + cpr_ro_sel0_perfcl: rosel0-perfcl@22b { + reg = <0x22b 0x1>; + bits = <2 4>; + }; + + /* CPR Init Voltage: Performance Cluster */ + cpr_init_voltage3_perfcl: ivolt3-perfcl@22b { + reg = <0x22b 0x2>; + bits = <6 6>; + }; + + cpr_init_voltage2_perfcl: ivolt2-perfcl@22c { + reg = <0x22c 0x2>; + bits = <4 6>; + }; + + cpr_init_voltage1_perfcl: ivolt1-perfcl@22d { + reg = <0x22d 0x1>; + bits = <2 6>; + }; + + cpr_init_voltage0_perfcl: ivolt0-perfcl@22e { + reg = <0x22e 0x1>; + bits = <0 6>; + }; + + /* CPR Target Quotients: Performance Cluster */ + cpr_quot3_perfcl: quot3-perfcl@22f { + reg = <0x22f 0x2>; + bits = <4 11>; + }; + + cpr_quot2_perfcl: quot2-perfcl@231 { + reg = <0x231 0x2>; + bits = <0 12>; + }; + + cpr_quot1_perfcl: quot1-perfcl@232 { + reg = <0x232 0x2>; + bits = <4 12>; + }; + + cpr_quot0_perfcl: quot0-perfcl@234 { + reg = <0x234 0x2>; + bits = <0 12>; + }; + + /* CPR Quotient Offsets: Performance Cluster */ + cpr_quot_offset3_perfcl: qoff3-perfcl@237 { + reg = <0x237 0x2>; + bits = <7 6>; + }; + + cpr_quot_offset2_perfcl: qoff2-perfcl@238 { + reg = <0x238 0x2>; + bits = <6 7>; + }; + + cpr_quot_offset1_perfcl: qoff1-perfcl@239 { + reg = <0x239 0x1>; + bits = <5 3>; + }; + qusb2_hstx_trim: hstx-trim@23a { reg = <0x23a 0x1>; bits = <0 4>; @@ -3137,6 +3816,87 @@ frame@17928000 { }; }; + apc_cprh: power-controller@179c8000 { + compatible = "qcom,msm8998-cprh", "qcom,cprh"; + reg = <0x179c8000 0x4000>, + <0x179c4000 0x4000>; + + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + + /* Set the CPR clock here, it needs to match XO */ + assigned-clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&cprh_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX_AO>; + #power-domain-cells = <1>; + + nvmem-cells = <&cpr_efuse_speedbin>, + <&cpr_fuse_revision>, + <&cpr_quot0_pwrcl>, + <&cpr_quot1_pwrcl>, + <&cpr_quot2_pwrcl>, + <&cpr_quot3_pwrcl>, + <&cpr_quot_offset1_pwrcl>, + <&cpr_quot_offset2_pwrcl>, + <&cpr_quot_offset3_pwrcl>, + <&cpr_init_voltage0_pwrcl>, + <&cpr_init_voltage1_pwrcl>, + <&cpr_init_voltage2_pwrcl>, + <&cpr_init_voltage3_pwrcl>, + <&cpr_ro_sel0_pwrcl>, + <&cpr_ro_sel1_pwrcl>, + <&cpr_ro_sel2_pwrcl>, + <&cpr_ro_sel3_pwrcl>, + <&cpr_quot0_perfcl>, + <&cpr_quot1_perfcl>, + <&cpr_quot2_perfcl>, + <&cpr_quot3_perfcl>, + <&cpr_quot_offset1_perfcl>, + <&cpr_quot_offset2_perfcl>, + <&cpr_quot_offset3_perfcl>, + <&cpr_init_voltage0_perfcl>, + <&cpr_init_voltage1_perfcl>, + <&cpr_init_voltage2_perfcl>, + <&cpr_init_voltage3_perfcl>, + <&cpr_ro_sel0_perfcl>, + <&cpr_ro_sel1_perfcl>, + <&cpr_ro_sel2_perfcl>, + <&cpr_ro_sel3_perfcl>; + nvmem-cell-names = "cpr_speed_bin", + "cpr_fuse_revision", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_quotient4", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_quotient_offset4", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_init_voltage4", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_ring_osc4", + "cpr1_quotient1", + "cpr1_quotient2", + "cpr1_quotient3", + "cpr1_quotient4", + "cpr1_quotient_offset2", + "cpr1_quotient_offset3", + "cpr1_quotient_offset4", + "cpr1_init_voltage1", + "cpr1_init_voltage2", + "cpr1_init_voltage3", + "cpr1_init_voltage4", + "cpr1_ring_osc1", + "cpr1_ring_osc2", + "cpr1_ring_osc3", + "cpr1_ring_osc4"; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x17a00000 0x10000>, /* GICD */