From patchwork Mon Oct 7 06:10:19 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sibi Sankar X-Patchwork-Id: 13824114 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 89AC1CFB442 for ; Mon, 7 Oct 2024 06:26:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=iB0AI6hLDEK+MEnmfuuaBnzCQbs/s8jNuIuw+FIqfGk=; b=e/mH033a2c9xvv52eJPyNdj3wA u4rZE20litd+LJrVlBnev16+gAT/XlIqBZVcVyEJVuWTbapH9nA+vM9Ze3c1lJUt/UljYg1jvldxV EkEfEMLX2LlAos8gWYheTtIGEKCjx+LkNmoqQZthpnnZVM1d9kF7ZMZrB1c7hZZtufX1N7UogmdFn okTR7Hz4mO4kmKhPEMXwv1kyXBJRF1US5xeqVyVmTnycaThjX0zDRrMFGnvfUCLire3grw4eagxyp OEqNpE9iP5c986jZhVqv4QQB+VWrC3bXaCE6JfaVFo+mR86mlHfZZu/pIP3zmRU+VuoSHf4/8wm3/ lxlFnEAw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1sxhBk-00000001PfO-1Ab3; Mon, 07 Oct 2024 06:25:48 +0000 Received: from mx0b-0031df01.pphosted.com ([205.220.180.131]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1sxgxN-00000001NiC-1Fw8 for linux-arm-kernel@lists.infradead.org; Mon, 07 Oct 2024 06:10:58 +0000 Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4974SvFS024105; Mon, 7 Oct 2024 06:10:49 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= iB0AI6hLDEK+MEnmfuuaBnzCQbs/s8jNuIuw+FIqfGk=; b=GznUnUDZW3JOmnaV c+0zSHBaYYsXjLsdI8WNNXGhMBla7AHdqmkP4Ie0ICo14nMEXlv6X11D7hVxt/OV 8PtzzrJCSIe5Zpbl6m4wPRlAxgKpET3hrmLnIT/JvTUIbPwWeOCZjDsvi9+uaW7B +KmVDYZ+AaUIKIcYgAhlBxsR69aKAk43VCNLK/hjNxFZh0BML4seTB5SdZEJaRTB h9my9kIMqhRJBFygp7Ipm7HVscsxjOIb+TF8Jpj1PJ1XrkR/Pu7VPUDafygkd2aR udtAkjHQHSiMj0ABDga2YFx92Lud3XPsN7h0mqaB+qNWGO80jdpmC7dt2ikG3yI7 DVwhfQ== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 422xtb35n3-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 07 Oct 2024 06:10:48 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4976Alkm009204 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 7 Oct 2024 06:10:47 GMT Received: from hu-sibis-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 6 Oct 2024 23:10:42 -0700 From: Sibi Sankar To: , , , , , CC: , , , , , , , , Subject: [PATCH V4 1/5] dt-bindings: firmware: Document bindings for QCOM SCMI Generic Extension Date: Mon, 7 Oct 2024 11:40:19 +0530 Message-ID: <20241007061023.1978380-2-quic_sibis@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241007061023.1978380-1-quic_sibis@quicinc.com> References: <20241007061023.1978380-1-quic_sibis@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: olJh3G0kE16WGSuhFmmxu7epI8wpxwKp X-Proofpoint-GUID: olJh3G0kE16WGSuhFmmxu7epI8wpxwKp X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 spamscore=0 malwarescore=0 bulkscore=0 priorityscore=1501 clxscore=1015 phishscore=0 mlxscore=0 mlxlogscore=999 adultscore=0 lowpriorityscore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410070041 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20241006_231057_493866_A1B6A75E X-CRM114-Status: GOOD ( 19.16 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Document the various memory buses that can be monitored and scaled by the memory latency governor hosted by the QCOM SCMI Generic Extension Protocol v1.0. Signed-off-by: Sibi Sankar --- v3: * Restructure the bindings to mimic IMX [Christian] .../bindings/firmware/arm,scmi.yaml | 1 + .../bindings/firmware/qcom,scmi-memlat.yaml | 246 ++++++++++++++++++ .../dt-bindings/firmware/qcom,scmi-memlat.h | 22 ++ 3 files changed, 269 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml create mode 100644 include/dt-bindings/firmware/qcom,scmi-memlat.h diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 54d7d11bfed4..1d405f429168 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -24,6 +24,7 @@ description: | anyOf: - $ref: /schemas/firmware/nxp,imx95-scmi.yaml + - $ref: /schemas/firmware/qcom,scmi-memlat.yaml properties: $nodename: diff --git a/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml new file mode 100644 index 000000000000..0e8ea6dacd6a --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/qcom,scmi-memlat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SCMI Memory Bus nodes + +maintainers: + - Sibi Sankar + +description: + This binding describes the various memory buses that can be monitored and scaled + by memory latency governor running on the CPU Control Processor (SCMI controller). + +properties: + protocol@80: + $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node' + unevaluatedProperties: false + + properties: + reg: + const: 0x80 + + patternProperties: + '^memory-[0-9]$': + type: object + unevaluatedProperties: false + description: + The list of all memory buses that can be monitored and scaled by the + memory latency governor running on the SCMI controller. + + properties: + qcom,memory-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + Memory Bus Identifier + 0 = QCOM_MEM_TYPE_DDR + 1 = QCOM_MEM_TYPE_LLCC + 2 = QCOM_MEM_TYPE_DDR_QOS + + freq-table-hz: + items: + items: + - description: Minimum frequency of the memory bus in Hz + - description: Maximum frequency of the memory bus in Hz + + patternProperties: + '^monitor-[0-9]$': + type: object + unevaluatedProperties: false + description: + The list of all monitors detecting the memory latency bound workloads using + various counters. + + properties: + qcom,compute-type: + description: + Monitors of type compute perform bus dvfs based on a rudimentary CPU + frequency to memory frequency map. + type: boolean + + qcom,ipm-ceil: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Monitors having this property perform bus dvfs based on the same + rudimentary table but the scaling is performed only if the calculated + IPM (Instruction Per Misses) exceeds the given ceiling. + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + operating-points-v2: true + opp-table: + type: object + + required: + - cpus + - operating-points-v2 + + oneOf: + - required: [ 'qcom,compute-type' ] + - required: [ 'qcom,ipm-ceil' ] + + required: + - qcom,memory-type + - freq-table-hz + +additionalProperties: true + +examples: + - | + #include + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + protocol@80 { + reg = <0x80>; + + memory-0 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 <200000000 4224000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor0_opp_table>; + + memory0_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 547000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 768000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 1555000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 2092000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 3187000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + + monitor-1 { + qcom,compute-type; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor1_opp_table>; + + memory0_monitor1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 200000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 768000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 1555000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + }; + + memory-1 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 <300000000 1067000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory1_monitor0_opp_table>; + + memory1_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 300000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 466000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 600000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 806000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 933000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 1066000000>; + }; + }; + }; + }; + + memory-2 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 ; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory2_monitor0_opp_table>; + + memory2_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000>; + opp-level = ; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000>; + opp-level = ; + }; + }; + }; + }; + }; + }; + }; diff --git a/include/dt-bindings/firmware/qcom,scmi-memlat.h b/include/dt-bindings/firmware/qcom,scmi-memlat.h new file mode 100644 index 000000000000..7ae8d8d5623b --- /dev/null +++ b/include/dt-bindings/firmware/qcom,scmi-memlat.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H +#define __DT_BINDINGS_QCOM_SCMI_VENDOR + +/* Memory IDs */ +#define QCOM_MEM_TYPE_DDR 0x0 +#define QCOM_MEM_TYPE_LLCC 0x1 +#define QCOM_MEM_TYPE_DDR_QOS 0x2 + +/* + * QCOM_MEM_TYPE_DDR_QOS supports the following states. + * + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled + */ +#define QCOM_DDR_LEVEL_AUTO 0x0 +#define QCOM_DDR_LEVEL_PERF 0x1 + +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */ From patchwork Mon Oct 7 06:10:20 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sibi Sankar X-Patchwork-Id: 13824115 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 6EC7ACFB442 for ; Mon, 7 Oct 2024 06:27:13 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=tA6jcOHnq57p/t4iqww3OmqaZTdwxA3Ub0lz9Z7ShII=; b=JE7ACySN6N6tJAIhE+mTAlBK2b XVhkr1dFixKdzYZtfa+GNg0uCcvnEsUz1lwVmp+aGmhPzmUUz+PXTxchy0VZ1t/8w+lNdWsSu9o7p pVfIW/tRLyRFSaA3aiWtufFmEj8cnzY5LrEFtG1CKO1kpgD87ejBwluHle4iIaFuSt6jgoVW2WemR BMbtWGisZZ4k1/Eudmndx+6lR90LWzKMvcbkFWorFSufQPCtSLbgZQj6k8w+vjbmQPjDqg5IlBctB /VGrVUUoTgG+SIBNREHQB/i2a6nWrpyBL5WzJTmCJpOBYuy+nKDMQeSiC5asP7FmgwaB7AZ4gPa3t hmDg0T4w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1sxhCy-00000001Poh-2fE4; Mon, 07 Oct 2024 06:27:04 +0000 Received: from mx0b-0031df01.pphosted.com ([205.220.180.131]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1sxgxQ-00000001Nix-2Ijo for linux-arm-kernel@lists.infradead.org; Mon, 07 Oct 2024 06:11:01 +0000 Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4974SpSk019629; Mon, 7 Oct 2024 06:10:54 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= tA6jcOHnq57p/t4iqww3OmqaZTdwxA3Ub0lz9Z7ShII=; b=MybazCiV4JgQeKMd XIy/HHU32A42kxdTgYU2DPgHP5g82r0HIwcrbShg/bV7r2CrysFFTSn6htmCVqcp mkhP5I8GX0ofzCooYKoNVl22hZmgBul3RXTomhRZ5XL/XOtoPvvpGk2Rn1h2w0G/ j6qTP6tC+YR4T8sYxUCGFK9EsGXARbQAURmgCNw3AlctJMv+rHD/UPsCzd6nQBIz DhNEMpXHzh+eeaAQz64I1NBJVGWBzQdprxLRTrVqntv50Cl2gaa3KQNN8tvzDwLV Y1dkzzXDY5kJsXJ0UR4Ufrh5IbmWJT8H917IvMFHye+wqaJ7A6mNcDRfW+z+VcXi gdMTeQ== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 422xsnk5mm-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 07 Oct 2024 06:10:53 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4976Aqc4029352 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 7 Oct 2024 06:10:52 GMT Received: from hu-sibis-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 6 Oct 2024 23:10:47 -0700 From: Sibi Sankar To: , , , , , CC: , , , , , , , , Subject: [PATCH V4 2/5] firmware: arm_scmi: Add QCOM Generic Vendor Protocol documentation Date: Mon, 7 Oct 2024 11:40:20 +0530 Message-ID: <20241007061023.1978380-3-quic_sibis@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241007061023.1978380-1-quic_sibis@quicinc.com> References: <20241007061023.1978380-1-quic_sibis@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: nsa8l8YV22eDjLFTeYetAcr4d9TvlTOc X-Proofpoint-ORIG-GUID: nsa8l8YV22eDjLFTeYetAcr4d9TvlTOc X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 suspectscore=0 impostorscore=0 phishscore=0 adultscore=0 lowpriorityscore=0 mlxlogscore=999 clxscore=1015 malwarescore=0 priorityscore=1501 mlxscore=0 spamscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410070041 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20241006_231100_744459_08C2078A X-CRM114-Status: GOOD ( 16.60 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add QCOM System Control Management Interface (SCMI) Generic Vendor Extensions Protocol documentation. Signed-off-by: Sibi Sankar --- .../arm_scmi/vendors/qcom/qcom_generic.rst | 210 ++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst diff --git a/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst b/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst new file mode 100644 index 000000000000..1ee6dabaac23 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst @@ -0,0 +1,210 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +=============================================================================== +QCOM System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024, Qualcomm Innovation Center, Inc. All rights reserved. + +:Author: Sibi Sankar + +SCMI_GENERIC: System Control and Management Interface QCOM Generic Vendor Protocol +================================================================================== + +This protocol is intended as a generic way of exposing a number of Qualcomm +SoC specific features through a mixture of pre-determined algorithm string and +param_id pairs hosted on the SCMI controller. It implements an interface compliant +with the Arm SCMI Specification with additional vendor specific commands as +detailed below. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version |For this revision of the specification, this value must be | +| |0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bits[8] Set to 1. | +| |Bits[0] Set to 1. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |For all message id's the parameter has a value of 0. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_SET_PARAM +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is used to set various parameters supported by it. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the param_id and buf[] is parsed successfully | +| |by the chosen algorithm string. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches. | +| |INVALID_PARAMETERS: if the param_id and the buf[] passed | +| |is rejected by the algorithm string. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_GET_PARAM +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x11 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload and store of value for the specified | +| |param_id and algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the param_id and buf[] is parsed successfully | +| |by the chosen algorithm string and the result is copied | +| |into buf[]. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches. | +| |INVALID_PARAMETERS: if the param_id and the buf[] passed | +| |is rejected by the algorithm string. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_START_ACTIVITY +~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x12 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is generally used to start the activity performed by | +| |the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the activity performed by the algorithm string | +| |starts successfully. | +| |NOT_SUPPORTED: if the algorithm string does not have any. | +| |matches or if the activity is already running. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_STOP_ACTIVITY +~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x13 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is generally used to stop the activity performed by | +| |the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the activity performed by the algorithm string | +| |stops successfully. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches or if the activity isn't running. | ++------------------+-----------------------------------------------------------+ From patchwork Mon Oct 7 06:10:21 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sibi Sankar X-Patchwork-Id: 13824117 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 21B7ECFB442 for ; Mon, 7 Oct 2024 06:29:48 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=OjNrPOzYonHuniAB+wNmt2DvsJDDfx4msiAlqwSv0zM=; b=20hO//RCbIBKiBYfgtTOP7Ppdp y4OzK9Uu+P64C6U8PUXqsg9TeMOJuUIlscwIkV7aEIjA/BxIaJRrIfv0DK5aT3GbHuBNcrPVQh24A hg0CnL+k6hfRqIzbkK93Jqr1RRB64fzJBMhs5zyjL8pljYZo6aLW28jVGZE3ltIzjG84FYornz0DR TNKNxd3e7vKrSz3ymcqzTul8zPrhbrNzBqy1cZTcq2cbYEHAGl8KuaJ/qZOYZfrLhXw1IYTCv5LsO jQl1X2EheqHVdhtGhTDb4Azlc4Yjtf4J/0fJs8LimKzXhbS7ml27QxQGqvBfKm2bLXLA4cB4WlSAA 0j2pK6fw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1sxhFS-00000001QDt-311i; Mon, 07 Oct 2024 06:29:38 +0000 Received: from mx0a-0031df01.pphosted.com ([205.220.168.131]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1sxgxi-00000001Nni-3xYx for linux-arm-kernel@lists.infradead.org; Mon, 07 Oct 2024 06:11:21 +0000 Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4974Sns9015079; Mon, 7 Oct 2024 06:11:12 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= OjNrPOzYonHuniAB+wNmt2DvsJDDfx4msiAlqwSv0zM=; b=a8xAJPO8ArxGCj7l j96BL45nEZfT3smpBriVDYnJx7ohCtlk3ltIwnykDNM7xaE8oOKN0YC14w5tq2v1 alL9RBFJinuf+3wNjBj7e7vBiLlMzI5KYbuQAp4gxUU7I1oO2W0ppFt3/wrdn1/I foUy9fr6am0dOCgixvOyrv/xuMw0NH1MoAPshQ2l38ViJCxf7taBjgAsaV4G4VpJ cpiy9NKFEavM6AqC9ttdDFS+QdSHX11g6D+KQbGw28OruWN7Moj0aNbJS0bhf10k R3b3aNoU8mohaOMuVr4PHZS3xC5QHhyh9Oxf7rxYnCIj9avbNU9V/1eeJAjEl9dZ 8QBoRw== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 422xs735jp-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 07 Oct 2024 06:11:11 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4976AvZ9009300 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 7 Oct 2024 06:10:57 GMT Received: from hu-sibis-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 6 Oct 2024 23:10:52 -0700 From: Sibi Sankar To: , , , , , CC: , , , , , , , , , Amir Vajid Subject: [PATCH V4 3/5] firmware: arm_scmi: vendors: Add QCOM SCMI Generic Extensions Date: Mon, 7 Oct 2024 11:40:21 +0530 Message-ID: <20241007061023.1978380-4-quic_sibis@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241007061023.1978380-1-quic_sibis@quicinc.com> References: <20241007061023.1978380-1-quic_sibis@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: 4O-uGFOFMeoiMkXRwSJTgkEmUvTfhjgC X-Proofpoint-GUID: 4O-uGFOFMeoiMkXRwSJTgkEmUvTfhjgC X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 adultscore=0 suspectscore=0 priorityscore=1501 bulkscore=0 mlxlogscore=999 clxscore=1015 malwarescore=0 spamscore=0 lowpriorityscore=0 phishscore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410070042 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20241006_231119_031996_3E4246D6 X-CRM114-Status: GOOD ( 24.32 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The QCOM SCMI Generic Extensions Protocol provides a generic way of exposing a number of Qualcomm SoC specific features (like memory bus scaling) through a mixture of pre-determined algorithm strings and param_id pairs hosted on the SCMI controller. Co-developed-by: Shivnandan Kumar Signed-off-by: Shivnandan Kumar Co-developed-by: Ramakrishna Gottimukkula Signed-off-by: Ramakrishna Gottimukkula Co-developed-by: Amir Vajid Signed-off-by: Amir Vajid Signed-off-by: Sibi Sankar Reviewed-by: Cristian Marussi --- v3: * Pick up Rb tag and fixup/re-order elements of the vendor ops [Christian] * Follow naming convention and folder structure used by IMX * Add missing enum in the vendor protocol and fix documentation [Konrad] drivers/firmware/arm_scmi/Kconfig | 1 + drivers/firmware/arm_scmi/Makefile | 1 + .../firmware/arm_scmi/vendors/qcom/Kconfig | 15 ++ .../firmware/arm_scmi/vendors/qcom/Makefile | 2 + .../arm_scmi/vendors/qcom/qcom-generic-ext.c | 184 ++++++++++++++++++ include/linux/scmi_qcom_protocol.h | 39 ++++ 6 files changed, 242 insertions(+) create mode 100644 drivers/firmware/arm_scmi/vendors/qcom/Kconfig create mode 100644 drivers/firmware/arm_scmi/vendors/qcom/Makefile create mode 100644 drivers/firmware/arm_scmi/vendors/qcom/qcom-generic-ext.c create mode 100644 include/linux/scmi_qcom_protocol.h diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig index dabd874641d0..73128442d97b 100644 --- a/drivers/firmware/arm_scmi/Kconfig +++ b/drivers/firmware/arm_scmi/Kconfig @@ -71,6 +71,7 @@ config ARM_SCMI_DEBUG_COUNTERS source "drivers/firmware/arm_scmi/transports/Kconfig" source "drivers/firmware/arm_scmi/vendors/imx/Kconfig" +source "drivers/firmware/arm_scmi/vendors/qcom/Kconfig" endif #ARM_SCMI_PROTOCOL diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile index 9ac81adff567..58cf4d656cbb 100644 --- a/drivers/firmware/arm_scmi/Makefile +++ b/drivers/firmware/arm_scmi/Makefile @@ -12,6 +12,7 @@ scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y) obj-$(CONFIG_ARM_SCMI_PROTOCOL) += transports/ obj-$(CONFIG_ARM_SCMI_PROTOCOL) += vendors/imx/ +obj-$(CONFIG_ARM_SCMI_PROTOCOL) += vendors/qcom/ obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o diff --git a/drivers/firmware/arm_scmi/vendors/qcom/Kconfig b/drivers/firmware/arm_scmi/vendors/qcom/Kconfig new file mode 100644 index 000000000000..5dd9e8a6b75f --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom/Kconfig @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "ARM SCMI QCOM Vendor Protocols" + +config QCOM_SCMI_GENERIC_EXT + tristate "Qualcomm Technologies, Inc. Qcom SCMI vendor Protocol" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + help + The QCOM SCMI vendor protocol provides a generic way of exposing + a number of Qualcomm SoC specific features (like memory bus scaling) + through a mixture of pre-determined algorithm strings and param_id + pairs hosted on the SCMI controller. + + This driver defines/documents the message ID's used for this + communication and also exposes the operations used by the clients. +endmenu diff --git a/drivers/firmware/arm_scmi/vendors/qcom/Makefile b/drivers/firmware/arm_scmi/vendors/qcom/Makefile new file mode 100644 index 000000000000..6b98fabbebb8 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_QCOM_SCMI_GENERIC_EXT) += qcom-generic-ext.o diff --git a/drivers/firmware/arm_scmi/vendors/qcom/qcom-generic-ext.c b/drivers/firmware/arm_scmi/vendors/qcom/qcom-generic-ext.c new file mode 100644 index 000000000000..f7cd949161df --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom/qcom-generic-ext.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include + +#include "../../common.h" + +/** + * enum qcom_generic_ext_protocol_cmd - vendor specific commands supported by SCMI Qualcomm + * generic vendor protocol. + * + * This protocol is intended as a generic way of exposing a number of Qualcomm SoC + * specific features through a mixture of pre-determined algorithm string and param_id + * pairs hosted on the SCMI controller. + * + * The QCOM SCMI Vendor Protocol has the protocol id as 0x80 and vendor id set to + * Qualcomm and the implementation version set to 0x20000. The PROTOCOL_VERSION command + * returns version 1.0. + * + * @QCOM_SCMI_SET_PARAM: message_id: 0x10 is used to set the parameter of a specific algo_str + * hosted on QCOM SCMI Vendor Protocol. The tx len depends on the + * algo_str used. + * @QCOM_SCMI_GET_PARAM: message_id: 0x11 is used to get parameter information of a specific + * algo_str hosted on QCOM SCMI Vendor Protocol. The tx and rx len + * depends on the algo_str used. + * @QCOM_SCMI_START_ACTIVITY: message_id: 0x12 is used to start the activity performed by + * the algo_str. + * @QCOM_SCMI_STOP_ACTIVITY: message_id: 0x13 is used to stop a pre-existing activity + * performed by the algo_str. + */ +enum qcom_generic_ext_protocol_cmd { + QCOM_SCMI_SET_PARAM = 0x10, + QCOM_SCMI_GET_PARAM = 0x11, + QCOM_SCMI_START_ACTIVITY = 0x12, + QCOM_SCMI_STOP_ACTIVITY = 0x13, +}; + +/** + * struct qcom_scmi_msg - represents the various parameters to be populated + * for using the QCOM SCMI Vendor Protocol + * + * @ext_id: reserved, must be zero + * @algo_low: lower 32 bits of the algo_str + * @algo_high: upper 32 bits of the algo_str + * @param_id: serves as token message id to the specific algo_str + * @buf: serves as the payload to the specified param_id and algo_str pair + */ +struct qcom_scmi_msg { + __le32 ext_id; + __le32 algo_low; + __le32 algo_high; + __le32 param_id; + __le32 buf[]; +}; + +static int qcom_scmi_set_param(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_SET_PARAM, buf_len + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_get_param(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id, size_t rx_size) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_GET_PARAM, buf_len + sizeof(*msg), rx_size, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + memcpy(buf, t->rx.buf, t->rx.len); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_start_activity(const struct scmi_protocol_handle *ph, void *buf, + size_t buf_len, u64 algo_str, u32 param_id) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_START_ACTIVITY, buf_len + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static int qcom_scmi_stop_activity(const struct scmi_protocol_handle *ph, void *buf, + size_t buf_len, u64 algo_str, u32 param_id) +{ + struct scmi_xfer *t; + struct qcom_scmi_msg *msg; + int ret; + + ret = ph->xops->xfer_get_init(ph, QCOM_SCMI_STOP_ACTIVITY, buf_len + sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->algo_low = cpu_to_le32(lower_32_bits(algo_str)); + msg->algo_high = cpu_to_le32(upper_32_bits(algo_str)); + msg->param_id = cpu_to_le32(param_id); + + memcpy(msg->buf, buf, t->tx.len - sizeof(*msg)); + + ret = ph->xops->do_xfer(ph, t); + ph->xops->xfer_put(ph, t); + + return ret; +} + +static struct qcom_generic_ext_ops qcom_proto_ops = { + .set_param = qcom_scmi_set_param, + .get_param = qcom_scmi_get_param, + .start_activity = qcom_scmi_start_activity, + .stop_activity = qcom_scmi_stop_activity, +}; + +static int qcom_generic_ext_protocol_init(const struct scmi_protocol_handle *ph) +{ + u32 version; + + ph->xops->version_get(ph, &version); + + dev_info(ph->dev, "QCOM Generic Vendor Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + return 0; +} + +static const struct scmi_protocol qcom_generic_ext = { + .id = SCMI_PROTOCOL_QCOM_GENERIC, + .owner = THIS_MODULE, + .instance_init = &qcom_generic_ext_protocol_init, + .ops = &qcom_proto_ops, + .vendor_id = "Qualcomm", + .impl_ver = 0x20000, +}; +module_scmi_protocol(qcom_generic_ext); + +MODULE_DESCRIPTION("QCOM SCMI Generic Vendor protocol"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/scmi_qcom_protocol.h b/include/linux/scmi_qcom_protocol.h new file mode 100644 index 000000000000..8f82c42e566d --- /dev/null +++ b/include/linux/scmi_qcom_protocol.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * SCMI Message Protocol driver QCOM extension header + * + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _LINUX_SCMI_QCOM_PROTOCOL_H +#define _LINUX_SCMI_QCOM_PROTOCOL_H + +#include +#include +#include + +#define SCMI_PROTOCOL_QCOM_GENERIC 0x80 + +struct scmi_protocol_handle; + +/** + * struct qcom_generic_ext_ops - represents the various operations provided + * by QCOM Generic Vendor Protocol + * + * @set_param: set parameter specified by param_id and algo_str pair. + * @get_param: retrieve parameter specified by param_id and algo_str pair. + * @start_activity: initiate a specific activity defined by algo_str. + * @stop_activity: halt previously initiated activity defined by algo_str. + */ +struct qcom_generic_ext_ops { + int (*set_param)(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id); + int (*get_param)(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id, size_t rx_size); + int (*start_activity)(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id); + int (*stop_activity)(const struct scmi_protocol_handle *ph, void *buf, size_t buf_len, + u64 algo_str, u32 param_id); +}; + +#endif /* _LINUX_SCMI_QCOM_PROTOCOL_H */ From patchwork Mon Oct 7 06:10:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sibi Sankar X-Patchwork-Id: 13824116 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9F5D1CFB442 for ; Mon, 7 Oct 2024 06:28:34 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=9IP0VuH5eD8upeINPz2E2SQs4NgBBCYZvBXDFD+mDyw=; b=EZfYpfTcAYsGTwTlOyTG8YuCz6 H6gEBnLT7M98m5jttOzOkOTzwGrlR4nyTVHqjZEN1JL+ul8yWVNMztIVTzQ+4k5KEdQFXVIvmJERT caB0gvJi5jHeYUdfhiO3tOAQ1fcgi3rw+iVQ//sQ5NsQyHyszVGXOlcFf5NN5Yn3CWE87SM3GSuSu 3oEs8M88/H3sFTtmU8aFB+cIfA2eYPChVdeZLBlbFVGBPIAwhxQSpvXVZmPx+Ki6oM7MS0rSUrt+n +EbuMcmhO4+7kQ6B3HMRGJvyuBCl4le5F5HykjnrdHKTowxWtc5TuCcFWZDpgrKYbhUv6zqG13jH0 9XXk1h0A==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1sxhED-00000001Pyw-0aze; Mon, 07 Oct 2024 06:28:21 +0000 Received: from mx0b-0031df01.pphosted.com ([205.220.180.131]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1sxgxb-00000001Nl0-3bSz for linux-arm-kernel@lists.infradead.org; Mon, 07 Oct 2024 06:11:14 +0000 Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4974Sk9B026313; Mon, 7 Oct 2024 06:11:05 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 9IP0VuH5eD8upeINPz2E2SQs4NgBBCYZvBXDFD+mDyw=; b=jWd706J5pB/XKPW5 CTwExL9+B/NL5ZXIMCpV35Xd76japwjqIsoe0mkvMaHS9QHLTRGoki62zUkTJkWi Epf7twNYsnNJQ3Ed4cRJ2g9/tU6n85RMRH+6AHE4lBTFr2s/HKPCexDcmc3mKu5w E5qS6Ngl/F3wH7ga6LvvY4PF+DeBWWApI2BKgHJ+M1dF4roUUTUyjKzkb8mcQKYV Y+QlJD9MuAk21Zld9bMX7CCZHuK7uu+DYXQxLmHswDXuFbmvs0Cg4hZ7ZbYASduF VvaArcAHW/T2inFS7T7akmmYfIa6En6oSZe0ADkHc4lls5vfqcenbtHgfGfm/Osr K7KgmQ== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 422xu6b4pk-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 07 Oct 2024 06:11:04 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4976B39i029571 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 7 Oct 2024 06:11:03 GMT Received: from hu-sibis-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 6 Oct 2024 23:10:57 -0700 From: Sibi Sankar To: , , , , , CC: , , , , , , , , , Amir Vajid Subject: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor Date: Mon, 7 Oct 2024 11:40:22 +0530 Message-ID: <20241007061023.1978380-5-quic_sibis@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241007061023.1978380-1-quic_sibis@quicinc.com> References: <20241007061023.1978380-1-quic_sibis@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: tEZuKciGy8f_1KUch_IWYK0XWbKLK89t X-Proofpoint-ORIG-GUID: tEZuKciGy8f_1KUch_IWYK0XWbKLK89t X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 clxscore=1015 spamscore=0 mlxscore=0 malwarescore=0 suspectscore=0 mlxlogscore=999 impostorscore=0 priorityscore=1501 lowpriorityscore=0 phishscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410070041 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20241006_231112_064459_662309BB X-CRM114-Status: GOOD ( 28.81 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Introduce a client driver that uses the memlat algorithm string hosted on QCOM SCMI Generic Extension Protocol to detect memory latency workloads and control frequency/level of the various memory buses (DDR/LLCC/DDR_QOS). Co-developed-by: Shivnandan Kumar Signed-off-by: Shivnandan Kumar Co-developed-by: Ramakrishna Gottimukkula Signed-off-by: Ramakrishna Gottimukkula Co-developed-by: Amir Vajid Signed-off-by: Amir Vajid Signed-off-by: Sibi Sankar --- v3: * Add missing enum in the scmi memlat driver and fix documentation [Konrad] * Add checks for max memory and monitor [Shivnandan] * Fix typo from START_TIMER -> STOP_TIMER [Shivnandan] * Make populate_physical_mask func to void [Shivnandan] * Remove unecessary zero set [Shivnandan] * Use __free(device node) in init_cpufreq-memfreqmap [Christian/Konrad] * Use sdev->dev.of_node directly [Christian] * use return dev_err_probe in multiple places [Christian] drivers/soc/qcom/Kconfig | 12 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/qcom_scmi_memlat_client.c | 569 +++++++++++++++++++++ 3 files changed, 582 insertions(+) create mode 100644 drivers/soc/qcom/qcom_scmi_memlat_client.c diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 74b9121240f8..1b6dd40d69ea 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -295,4 +295,16 @@ config QCOM_PBS This module provides the APIs to the client drivers that wants to send the PBS trigger event to the PBS RAM. +config QCOM_SCMI_MEMLAT_CLIENT + tristate "Qualcomm Technologies Inc. SCMI client driver" + depends on QCOM_SCMI_GENERIC_EXT || COMPILE_TEST + help + This driver uses the MEMLAT (memory latency) algorithm string + hosted on QCOM SCMI Vendor Protocol to detect memory latency + workloads and control frequency/level of the various memory + buses (DDR/LLCC/DDR_QOS). + + This driver defines/documents the parameter IDs used while configuring + the memory buses. + endmenu diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index acbca2ab5cc2..28549bb141bc 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_QCOM_APR) += apr.o obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o +obj-$(CONFIG_QCOM_SCMI_MEMLAT_CLIENT) += qcom_scmi_memlat_client.o qcom_ice-objs += ice.o obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o obj-$(CONFIG_QCOM_PBS) += qcom-pbs.o diff --git a/drivers/soc/qcom/qcom_scmi_memlat_client.c b/drivers/soc/qcom/qcom_scmi_memlat_client.c new file mode 100644 index 000000000000..05198bf1f7ec --- /dev/null +++ b/drivers/soc/qcom/qcom_scmi_memlat_client.c @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEMLAT_ALGO_STR 0x4D454D4C4154 /* MEMLAT */ +#define INVALID_IDX 0xff +#define MAX_MEMORY_TYPES 3 +#define MAX_MONITOR_CNT 4 +#define MAX_NAME_LEN 20 +#define MAX_MAP_ENTRIES 7 +#define CPUCP_DEFAULT_SAMPLING_PERIOD_MS 4 +#define CPUCP_DEFAULT_FREQ_METHOD 1 + +/** + * enum scmi_memlat_protocol_cmd - parameter_ids supported by the "MEMLAT" algo_str hosted + * by the Qualcomm Generic Vendor Protocol on the SCMI controller. + * + * MEMLAT (Memory Latency) monitors the counters to detect memory latency bound workloads + * and scales the frequency/levels of the memory buses accordingly. + * + * @MEMLAT_SET_MEM_GROUP: initializes the frequency/level scaling functions for the memory bus. + * @MEMLAT_SET_MONITOR: configures the monitor to work on a specific memory bus. + * @MEMLAT_SET_COMMON_EV_MAP: set up common counters used to monitor the cpu frequency. + * @MEMLAT_SET_GRP_EV_MAP: set up any specific counters used to monitor the memory bus. + * @MEMLAT_IPM_CEIL: set the IPM (Instruction Per Misses) ceiling per monitor. + * @MEMLAT_SAMPLE_MS: set the sampling period for all the monitors. + * @MEMLAT_MON_FREQ_MAP: setup the cpufreq to memfreq map. + * @MEMLAT_SET_MIN_FREQ: set the max frequency of the memory bus. + * @MEMLAT_SET_MAX_FREQ: set the min frequency of the memory bus. + * @MEMLAT_START_TIMER: start all the monitors with the requested sampling period. + * @MEMLAT_STOP_TIMER: stop all the running monitors. + * @MEMLAT_SET_EFFECTIVE_FREQ_METHOD: set the method used to determine cpu frequency. + */ +enum scmi_memlat_protocol_cmd { + MEMLAT_SET_MEM_GROUP = 16, + MEMLAT_SET_MONITOR, + MEMLAT_SET_COMMON_EV_MAP, + MEMLAT_SET_GRP_EV_MAP, + MEMLAT_IPM_CEIL = 23, + MEMLAT_SAMPLE_MS = 31, + MEMLAT_MON_FREQ_MAP, + MEMLAT_SET_MIN_FREQ, + MEMLAT_SET_MAX_FREQ, + MEMLAT_START_TIMER = 36, + MEMLAT_STOP_TIMER, + MEMLAT_SET_EFFECTIVE_FREQ_METHOD = 39, +}; + +struct map_table { + u16 v1; + u16 v2; +}; + +struct map_param_msg { + u32 hw_type; + u32 mon_idx; + u32 nr_rows; + struct map_table tbl[MAX_MAP_ENTRIES]; +} __packed; + +struct node_msg { + u32 cpumask; + u32 hw_type; + u32 mon_type; + u32 mon_idx; + char mon_name[MAX_NAME_LEN]; +}; + +struct scalar_param_msg { + u32 hw_type; + u32 mon_idx; + u32 val; +}; + +enum common_ev_idx { + INST_IDX, + CYC_IDX, + CONST_CYC_IDX, + FE_STALL_IDX, + BE_STALL_IDX, + NUM_COMMON_EVS +}; + +enum grp_ev_idx { + MISS_IDX, + WB_IDX, + ACC_IDX, + NUM_GRP_EVS +}; + +#define EV_CPU_CYCLES 0 +#define EV_INST_RETIRED 2 +#define EV_L2_D_RFILL 5 + +struct ev_map_msg { + u32 num_evs; + u32 hw_type; + u32 cid[NUM_COMMON_EVS]; +}; + +struct cpufreq_memfreq_map { + unsigned int cpufreq_mhz; + unsigned int memfreq_khz; +}; + +struct scmi_monitor_info { + struct cpufreq_memfreq_map *freq_map; + char mon_name[MAX_NAME_LEN]; + u32 mon_idx; + u32 mon_type; + u32 ipm_ceil; + u32 mask; + u32 freq_map_len; +}; + +struct scmi_memory_info { + struct scmi_monitor_info *monitor[MAX_MONITOR_CNT]; + u32 hw_type; + int monitor_cnt; + u32 min_freq; + u32 max_freq; +}; + +struct scmi_memlat_info { + struct scmi_protocol_handle *ph; + const struct qcom_generic_ext_ops *ops; + struct scmi_memory_info *memory[MAX_MEMORY_TYPES]; + u32 cluster_info[NR_CPUS]; + int memory_cnt; +}; + +static int populate_cluster_info(u32 *cluster_info) +{ + char name[MAX_NAME_LEN]; + int i = 0; + + struct device_node *cn __free(device_node) = of_find_node_by_path("/cpus"); + if (!cn) + return -ENODEV; + + struct device_node *map __free(device_node) = of_get_child_by_name(cn, "cpu-map"); + if (!map) + return -ENODEV; + + do { + snprintf(name, sizeof(name), "cluster%d", i); + struct device_node *c __free(device_node) = of_get_child_by_name(map, name); + if (!c) + break; + + *(cluster_info + i) = of_get_child_count(c); + i++; + } while (1); + + return 0; +} + +static void populate_physical_mask(struct device_node *np, u32 *mask, u32 *cluster_info) +{ + struct device_node *dev_phandle __free(device_node); + int cpu, i = 0, physical_id; + + do { + dev_phandle = of_parse_phandle(np, "cpus", i++); + cpu = of_cpu_node_to_id(dev_phandle); + if (cpu != -ENODEV) { + physical_id = topology_core_id(cpu); + for (int j = 0; j < topology_cluster_id(cpu); j++) + physical_id += *(cluster_info + j); + *mask |= BIT(physical_id); + } + } while (dev_phandle); +} + +static struct cpufreq_memfreq_map *init_cpufreq_memfreq_map(struct device *dev, + struct scmi_memory_info *memory, + struct device_node *of_node, + u32 *cnt) +{ + struct device_node *tbl_np __free(device_node), *opp_np __free(device_node); + struct cpufreq_memfreq_map *tbl; + int ret, i = 0; + u32 level, len; + u64 rate; + + tbl_np = of_parse_phandle(of_node, "operating-points-v2", 0); + if (!tbl_np) + return ERR_PTR(-ENODEV); + + len = min(of_get_available_child_count(tbl_np), MAX_MAP_ENTRIES); + if (len == 0) + return ERR_PTR(-ENODEV); + + tbl = devm_kzalloc(dev, (len + 1) * sizeof(struct cpufreq_memfreq_map), + GFP_KERNEL); + if (!tbl) + return ERR_PTR(-ENOMEM); + + for_each_available_child_of_node(tbl_np, opp_np) { + ret = of_property_read_u64_index(opp_np, "opp-hz", 0, &rate); + if (ret < 0) + return ERR_PTR(ret); + + tbl[i].cpufreq_mhz = rate / HZ_PER_MHZ; + + if (memory->hw_type != QCOM_MEM_TYPE_DDR_QOS) { + ret = of_property_read_u64_index(opp_np, "opp-hz", 1, &rate); + if (ret < 0) + return ERR_PTR(ret); + + tbl[i].memfreq_khz = rate / HZ_PER_KHZ; + } else { + ret = of_property_read_u32(opp_np, "opp-level", &level); + if (ret < 0) + return ERR_PTR(ret); + + tbl[i].memfreq_khz = level; + } + + dev_dbg(dev, "Entry%d CPU:%u, Mem:%u\n", i, tbl[i].cpufreq_mhz, tbl[i].memfreq_khz); + i++; + } + *cnt = len; + + return tbl; +} + +static int process_scmi_memlat_of_node(struct scmi_device *sdev, struct scmi_memlat_info *info) +{ + struct scmi_monitor_info *monitor; + struct scmi_memory_info *memory; + char name[MAX_NAME_LEN]; + u64 memfreq[2]; + int ret; + + ret = populate_cluster_info(info->cluster_info); + if (ret < 0) { + dev_err_probe(&sdev->dev, ret, "failed to populate cluster info\n"); + goto err; + } + + of_node_get(sdev->dev.of_node); + do { + snprintf(name, sizeof(name), "memory-%d", info->memory_cnt); + struct device_node *memory_np __free(device_node) = + of_find_node_by_name(sdev->dev.of_node, name); + + if (!memory_np) + break; + + if (info->memory_cnt >= MAX_MEMORY_TYPES) + return dev_err_probe(&sdev->dev, -EINVAL, + "failed to parse unsupported memory type\n"); + + memory = devm_kzalloc(&sdev->dev, sizeof(*memory), GFP_KERNEL); + if (!memory) { + ret = -ENOMEM; + goto err; + } + + ret = of_property_read_u32(memory_np, "qcom,memory-type", &memory->hw_type); + if (ret) { + dev_err_probe(&sdev->dev, ret, "failed to read memory type\n"); + goto err; + } + + ret = of_property_read_u64_array(memory_np, "freq-table-hz", memfreq, 2); + if (ret && (ret != -EINVAL)) { + dev_err_probe(&sdev->dev, ret, "failed to read min/max freq\n"); + goto err; + } + + if (memory->hw_type != QCOM_MEM_TYPE_DDR_QOS) { + memory->min_freq = memfreq[0] / HZ_PER_KHZ; + memory->max_freq = memfreq[1] / HZ_PER_KHZ; + } else { + memory->min_freq = memfreq[0]; + memory->max_freq = memfreq[1]; + } + info->memory[info->memory_cnt++] = memory; + + do { + snprintf(name, sizeof(name), "monitor-%d", memory->monitor_cnt); + struct device_node *monitor_np __free(device_node) = + of_get_child_by_name(memory_np, name); + + if (!monitor_np) + break; + + if (memory->monitor_cnt >= MAX_MONITOR_CNT) + return dev_err_probe(&sdev->dev, -EINVAL, + "failed to parse unsupported monitor\n"); + + monitor = devm_kzalloc(&sdev->dev, sizeof(*monitor), GFP_KERNEL); + if (!monitor) { + ret = -ENOMEM; + goto err; + } + + monitor->mon_type = of_property_read_bool(monitor_np, "qcom,compute-type"); + if (!monitor->mon_type) { + ret = of_property_read_u32(monitor_np, "qcom,ipm-ceil", + &monitor->ipm_ceil); + if (ret) { + dev_err_probe(&sdev->dev, ret, + "failed to read IPM ceiling\n"); + goto err; + } + } + + /* + * Variants of the SoC having reduced number of cpus operate + * with the same number of logical cpus but the physical + * cpu disabled will differ between parts. Calculate the + * physical cpu number using cluster information instead. + */ + populate_physical_mask(monitor_np, &monitor->mask, info->cluster_info); + + monitor->freq_map = init_cpufreq_memfreq_map(&sdev->dev, memory, monitor_np, + &monitor->freq_map_len); + if (IS_ERR(monitor->freq_map)) { + dev_err_probe(&sdev->dev, PTR_ERR(monitor->freq_map), + "failed to populate cpufreq-memfreq map\n"); + goto err; + } + + strscpy(monitor->mon_name, name, sizeof(monitor->mon_name)); + monitor->mon_idx = memory->monitor_cnt; + + memory->monitor[memory->monitor_cnt++] = monitor; + } while (1); + + if (!memory->monitor_cnt) { + ret = -EINVAL; + dev_err_probe(&sdev->dev, ret, "failed to find monitor nodes\n"); + goto err; + } + } while (1); + + if (!info->memory_cnt) { + ret = -EINVAL; + dev_err_probe(&sdev->dev, ret, "failed to find memory nodes\n"); + } + +err: + of_node_put(sdev->dev.of_node); + + return ret; +} + +static int configure_cpucp_common_events(struct scmi_memlat_info *info) +{ + const struct qcom_generic_ext_ops *ops = info->ops; + u8 ev_map[NUM_COMMON_EVS]; + struct ev_map_msg msg; + + memset(ev_map, 0xFF, NUM_COMMON_EVS); + + msg.num_evs = NUM_COMMON_EVS; + msg.hw_type = INVALID_IDX; + msg.cid[INST_IDX] = EV_INST_RETIRED; + msg.cid[CYC_IDX] = EV_CPU_CYCLES; + msg.cid[CONST_CYC_IDX] = INVALID_IDX; + msg.cid[FE_STALL_IDX] = INVALID_IDX; + msg.cid[BE_STALL_IDX] = INVALID_IDX; + + return ops->set_param(info->ph, &msg, sizeof(msg), MEMLAT_ALGO_STR, + MEMLAT_SET_COMMON_EV_MAP); +} + +static int configure_cpucp_grp(struct device *dev, struct scmi_memlat_info *info, int memory_index) +{ + const struct qcom_generic_ext_ops *ops = info->ops; + struct scmi_memory_info *memory = info->memory[memory_index]; + struct ev_map_msg ev_msg; + u8 ev_map[NUM_GRP_EVS]; + struct node_msg msg; + int ret; + + msg.cpumask = 0; + msg.hw_type = memory->hw_type; + msg.mon_type = 0; + msg.mon_idx = 0; + ret = ops->set_param(info->ph, &msg, sizeof(msg), MEMLAT_ALGO_STR, MEMLAT_SET_MEM_GROUP); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to configure mem type %d\n", + memory->hw_type); + + memset(ev_map, 0xFF, NUM_GRP_EVS); + ev_msg.num_evs = NUM_GRP_EVS; + ev_msg.hw_type = memory->hw_type; + ev_msg.cid[MISS_IDX] = EV_L2_D_RFILL; + ev_msg.cid[WB_IDX] = INVALID_IDX; + ev_msg.cid[ACC_IDX] = INVALID_IDX; + ret = ops->set_param(info->ph, &ev_msg, sizeof(ev_msg), MEMLAT_ALGO_STR, + MEMLAT_SET_GRP_EV_MAP); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to configure event map for mem type %d\n", + memory->hw_type); + + return ret; +} + +static int configure_cpucp_mon(struct device *dev, struct scmi_memlat_info *info, + int memory_index, int monitor_index) +{ + const struct qcom_generic_ext_ops *ops = info->ops; + struct scmi_memory_info *memory = info->memory[memory_index]; + struct scmi_monitor_info *monitor = memory->monitor[monitor_index]; + struct scalar_param_msg scalar_msg; + struct map_param_msg map_msg; + struct node_msg msg; + int ret; + int i; + + msg.cpumask = monitor->mask; + msg.hw_type = memory->hw_type; + msg.mon_type = monitor->mon_type; + msg.mon_idx = monitor->mon_idx; + strscpy(msg.mon_name, monitor->mon_name, sizeof(msg.mon_name)); + ret = ops->set_param(info->ph, &msg, sizeof(msg), MEMLAT_ALGO_STR, MEMLAT_SET_MONITOR); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to configure monitor %s\n", + monitor->mon_name); + + scalar_msg.hw_type = memory->hw_type; + scalar_msg.mon_idx = monitor->mon_idx; + scalar_msg.val = monitor->ipm_ceil; + ret = ops->set_param(info->ph, &scalar_msg, sizeof(scalar_msg), MEMLAT_ALGO_STR, + MEMLAT_IPM_CEIL); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to set ipm ceil for %s\n", + monitor->mon_name); + + map_msg.hw_type = memory->hw_type; + map_msg.mon_idx = monitor->mon_idx; + map_msg.nr_rows = monitor->freq_map_len; + for (i = 0; i < monitor->freq_map_len; i++) { + map_msg.tbl[i].v1 = monitor->freq_map[i].cpufreq_mhz; + map_msg.tbl[i].v2 = monitor->freq_map[i].memfreq_khz; + } + ret = ops->set_param(info->ph, &map_msg, sizeof(map_msg), MEMLAT_ALGO_STR, + MEMLAT_MON_FREQ_MAP); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to configure freq_map for %s\n", + monitor->mon_name); + + scalar_msg.hw_type = memory->hw_type; + scalar_msg.mon_idx = monitor->mon_idx; + scalar_msg.val = memory->min_freq; + ret = ops->set_param(info->ph, &scalar_msg, sizeof(scalar_msg), MEMLAT_ALGO_STR, + MEMLAT_SET_MIN_FREQ); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to set min_freq for %s\n", + monitor->mon_name); + + scalar_msg.hw_type = memory->hw_type; + scalar_msg.mon_idx = monitor->mon_idx; + scalar_msg.val = memory->max_freq; + ret = ops->set_param(info->ph, &scalar_msg, sizeof(scalar_msg), MEMLAT_ALGO_STR, + MEMLAT_SET_MAX_FREQ); + if (ret < 0) + dev_err_probe(dev, ret, "failed to set max_freq for %s\n", monitor->mon_name); + + return ret; +} + +static int cpucp_memlat_init(struct scmi_device *sdev) +{ + const struct scmi_handle *handle = sdev->handle; + const struct qcom_generic_ext_ops *ops; + struct scmi_protocol_handle *ph; + struct scmi_memlat_info *info; + u32 cpucp_freq_method = CPUCP_DEFAULT_FREQ_METHOD; + u32 cpucp_sample_ms = CPUCP_DEFAULT_SAMPLING_PERIOD_MS; + int ret, i, j; + + if (!handle) + return -ENODEV; + + ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_QCOM_GENERIC, &ph); + if (IS_ERR(ops)) + return PTR_ERR(ops); + + info = devm_kzalloc(&sdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ret = process_scmi_memlat_of_node(sdev, info); + if (ret) + return ret; + + info->ph = ph; + info->ops = ops; + + /* Configure common events ids */ + ret = configure_cpucp_common_events(info); + if (ret < 0) + return dev_err_probe(&sdev->dev, ret, "failed to configure common events\n"); + + for (i = 0; i < info->memory_cnt; i++) { + /* Configure per group parameters */ + ret = configure_cpucp_grp(&sdev->dev, info, i); + if (ret < 0) + return ret; + + for (j = 0; j < info->memory[i]->monitor_cnt; j++) { + /* Configure per monitor parameters */ + ret = configure_cpucp_mon(&sdev->dev, info, i, j); + if (ret < 0) + return ret; + } + } + + /* Set loop sampling time */ + ret = ops->set_param(ph, &cpucp_sample_ms, sizeof(cpucp_sample_ms), MEMLAT_ALGO_STR, + MEMLAT_SAMPLE_MS); + if (ret < 0) + return dev_err_probe(&sdev->dev, ret, "failed to set sample_ms\n"); + + /* Set the effective cpu frequency calculation method */ + ret = ops->set_param(ph, &cpucp_freq_method, sizeof(cpucp_freq_method), MEMLAT_ALGO_STR, + MEMLAT_SET_EFFECTIVE_FREQ_METHOD); + if (ret < 0) + return dev_err_probe(&sdev->dev, ret, + "failed to set effective frequency calc method\n"); + + /* Start sampling and voting timer */ + ret = ops->start_activity(ph, NULL, 0, MEMLAT_ALGO_STR, MEMLAT_START_TIMER); + if (ret < 0) + dev_err_probe(&sdev->dev, ret, "failed to start memory group timer\n"); + + return ret; +} + +static int scmi_client_probe(struct scmi_device *sdev) +{ + return cpucp_memlat_init(sdev); +} + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_QCOM_GENERIC, "qcom-generic-ext" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver qcom_scmi_client_drv = { + .name = "scmi-qcom-generic-ext-memlat", + .probe = scmi_client_probe, + .id_table = scmi_id_table, +}; +module_scmi_driver(qcom_scmi_client_drv); + +MODULE_DESCRIPTION("QTI SCMI client driver"); +MODULE_LICENSE("GPL"); From patchwork Mon Oct 7 06:10:23 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sibi Sankar X-Patchwork-Id: 13824173 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 84BC6CFB442 for ; Mon, 7 Oct 2024 06:31:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=+XsnJmQ6qjXHSljaiwdTrTyOI6pTwJNl2FAkI9q3fwE=; b=px+7rBCHm4c87PGvLroCPZOytE ncddYe12mw09/lj57VJkfr6MM21GAqLCLFc1US8AvYINoSfsbKt96Vf4oZwdb2QMkoUSt8LcK3t7U P9LCHBZdgDzlGKfOu4/z5QP/Ctmqgo4i9DoCZdUFkyNADsgcfibWDWPh1yf/z3PKWgr4hrrTdFN7p wAiROiXHnpd6oXmGDH5lhG6SmeCrgH078PBdqoNYxdSjDy+vGxB6TQD1x5171zZ0+ie8WSnYFAZg8 CVjpP1KRrQshhzeJOuot0UsXGKWqRZIzrPZubtXbJjuzdmf23TZGsludb1gUreSH6zgLCPPcxd4i2 5gU3KLZw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1sxhGz-00000001Qwx-3cyU; Mon, 07 Oct 2024 06:31:13 +0000 Received: from mx0a-0031df01.pphosted.com ([205.220.168.131]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1sxgxj-00000001NoO-3lh5 for linux-arm-kernel@lists.infradead.org; Mon, 07 Oct 2024 06:11:22 +0000 Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4974SkCD026815; Mon, 7 Oct 2024 06:11:13 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= +XsnJmQ6qjXHSljaiwdTrTyOI6pTwJNl2FAkI9q3fwE=; b=lLU0qMYwt3vsj3dp BwR843t9iuSbDrILz1mm9EjwB95IDSh4K8h0+40KWSnyB6ckac+dGq8WRRu7pRhx 2f0ENQ7EQMDx40Jizrw0En9gH0V7+tEhaS7aBOwI6kfEXvWIvOFOf6cWpsieKbh1 75lKrS/kf3zxAfQBwdDeAvh8Grx8kfieWWcETpKwspPktS3JW/vZzX3hccmY+AU7 Q9VNDVcBrAKY/lQq1nSdkybXItM3h88M+k9Hol7jXtuzwEPCV8RGyoPvleLf8oGj c6N4v0XZ5D8JV9BxL6DCv9fum5ybZTeOn+dj6Fe4EsgDbauAYwc1V3GZDBhC3QFe xNmXBQ== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 422xq9u5me-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 07 Oct 2024 06:11:12 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4976B7dk015235 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 7 Oct 2024 06:11:08 GMT Received: from hu-sibis-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 6 Oct 2024 23:11:03 -0700 From: Sibi Sankar To: , , , , , CC: , , , , , , , , Subject: [PATCH V4 5/5] arm64: dts: qcom: x1e80100: Enable LLCC/DDR/DDR_QOS dvfs Date: Mon, 7 Oct 2024 11:40:23 +0530 Message-ID: <20241007061023.1978380-6-quic_sibis@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241007061023.1978380-1-quic_sibis@quicinc.com> References: <20241007061023.1978380-1-quic_sibis@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: WI3ajMQnc0E_pXSm-x2RF5CtWFpd5PyA X-Proofpoint-GUID: WI3ajMQnc0E_pXSm-x2RF5CtWFpd5PyA X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 phishscore=0 spamscore=0 lowpriorityscore=0 priorityscore=1501 impostorscore=0 bulkscore=0 suspectscore=0 malwarescore=0 adultscore=0 mlxlogscore=920 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410070042 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20241006_231120_074141_0AD05E39 X-CRM114-Status: GOOD ( 10.68 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Enable LLCC/DDR/DDR_QOS bus scaling through the QCOM SCMI Generic Extension protocol. Signed-off-by: Sibi Sankar --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 138 +++++++++++++++++++++++++ 1 file changed, 138 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index aec3ceb502f6..24ebccd8c124 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -325,6 +326,143 @@ scmi_dvfs: protocol@13 { reg = <0x13>; #power-domain-cells = <1>; }; + + scmi_vendor: protocol@80 { + reg = <0x80>; + + memory-0 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 <200000000 4224000000>; + + monitor-0 { + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 + &CPU7 &CPU8 &CPU9 &CPU10 &CPU11>; + qcom,ipm-ceil = <20000000>; + operating-points-v2 = <&memory0_monitor0_opp_table>; + + memory0_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 547000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 768000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 1555000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 2092000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 3187000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + + monitor-1 { + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 + &CPU7 &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor1_opp_table>; + qcom,compute-type; + + memory0_monitor1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 200000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 768000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 1555000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + }; + + memory-1 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 <300000000 1067000000>; + + monitor-0 { + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 + &CPU7 &CPU8 &CPU9 &CPU10 &CPU11>; + qcom,ipm-ceil = <20000000>; + operating-points-v2 = <&memory1_monitor0_opp_table>; + + memory1_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 300000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 466000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 600000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 806000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 933000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 1066000000>; + }; + }; + }; + }; + + memory-2 { + qcom,memory-type = ; + freq-table-hz = /bits/ 64 ; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 + &CPU7 &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory2_monitor0_opp_table>; + + memory2_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000>; + opp-level = ; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000>; + opp-level = ; + }; + }; + }; + }; + }; }; };