From patchwork Wed Jan 15 22:46:05 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sasha Finkelstein via B4 Relay X-Patchwork-Id: 13941002 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EB0FD1D9350; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; cv=none; b=nXW+IOtHnXfH7AE5AOvU/36WSuWzRgDoEtIxHUkRkYJ00RnDh3UKCCptuFOLAOJJmempQIUXLhYcuNnAH4aHBNyDRg7cTHOohbRbDEAxHeFiE5aB4zqSXQqcbUGvt0P5h4+lR8pBUoxJD/giyF+Q7I2jay+XRcnoJDcRFPmke1w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; c=relaxed/simple; bh=4mqO9fFAzT1FG6ss/NQO1jdCRuZdLW3O8dLx4waQ6Qc=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=rvdhjuQMCs4Pl1l1sgVZSpK90MywUrjhlDTvm3ZA+jEoKgFZ5cdPxhp/8JwMHjQcqJC+RStBKzl6FDBWOT0wu2p9aEtR+0GKy25O8afuRo3Q2QLK48qzFpF/kB5XDVMED9gg9Mc6faQxue25xq54s8i0OdTfL6WsH3bMFjc/mdM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=Fb9cX4jY; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="Fb9cX4jY" Received: by smtp.kernel.org (Postfix) with ESMTPS id 90D3CC4CEE2; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1736981172; bh=4mqO9fFAzT1FG6ss/NQO1jdCRuZdLW3O8dLx4waQ6Qc=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=Fb9cX4jYuI1Ty0wV5s0B7MAx2pGlHky766tXx4NbmQZ7sylbi9848bzIFm7pa+lPR OfRWCQDbdc6ca6HGzI/S3oLEzLv6/NmSLrf7efMZDj9XHDrZhu133xSP84Nq81k8ld ES0CLE+ZWIKZwBl6IAiTatyM1ilAxhdg2ING4AYv9KgOGScwHONEJcNuDFuYxTxImf tEMfY5PGOE+e0l6Iqf0kW5TkBJ7ymNwg4VxBwd1bbpRfoJTOPRqn7Rj7CMln+DI13O 012n5eczoogbLBa4DKBjZMfLnfqDOdLS9iGpbyDIVcG2hvhUlxmHVYlTBASk2f3ytM uDUZUbsWUtHew== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 78D9BC02185; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) From: Sasha Finkelstein via B4 Relay Date: Wed, 15 Jan 2025 23:46:05 +0100 Subject: [PATCH v4 1/4] dt-bindings: input: touchscreen: Add Z2 controller Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20250115-z2-v4-1-d7361ab16ba0@gmail.com> References: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> In-Reply-To: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> To: Hector Martin , Sven Peter , Alyssa Rosenzweig , Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg Cc: asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sasha Finkelstein , Krzysztof Kozlowski , Neal Gompa X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1736981170; l=2558; i=fnkl.kernel@gmail.com; s=20241124; h=from:subject:message-id; bh=WsWmSiIz/nvoXKk6dP9ylONnNigrsJDQdxWpfEhh4J8=; b=T05gQQb3NMpNcGc0WCYSF4OHLQmO7PepWjlGFkyX/eFuO/KD2nqdhTS0IBEBOtc4+CFW26S1S wpUgmtrTFzgBCjzwnbhA8ElpS3Ku7G//m0GXgWM07q3riUae6ydRgxN X-Developer-Key: i=fnkl.kernel@gmail.com; a=ed25519; pk=aSkp1PdZ+eF4jpMO6oLvz/YfT5XkBUneWwyhQrOgmsU= X-Endpoint-Received: by B4 Relay for fnkl.kernel@gmail.com/20241124 with auth_id=283 X-Original-From: Sasha Finkelstein Reply-To: fnkl.kernel@gmail.com From: Sasha Finkelstein Add bindings for touchscreen controllers attached using the Z2 protocol. Those are present in most Apple devices. Reviewed-by: Krzysztof Kozlowski Reviewed-by: Neal Gompa Signed-off-by: Sasha Finkelstein --- .../input/touchscreen/apple,z2-multitouch.yaml | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml new file mode 100644 index 0000000000000000000000000000000000000000..402ca6bffd3473a1a889ced7890e9836e6a76e45 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple touchscreens attached using the Z2 protocol + +maintainers: + - Sasha Finkelstein + +description: A series of touschscreen controllers used in Apple products + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - apple,j293-touchbar + - apple,j493-touchbar + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + firmware-name: + maxItems: 1 + + apple,z2-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4096 + description: + Calibration blob supplied by the bootloader + +required: + - compatible + - interrupts + - reset-gpios + - firmware-name + - touchscreen-size-x + - touchscreen-size-y + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + }; + }; + +... From patchwork Wed Jan 15 22:46:06 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sasha Finkelstein via B4 Relay X-Patchwork-Id: 13941003 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EB060161321; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; cv=none; b=jaKpyEQb0PcNbcGGOvulsc2UNIfA6+SD3oMvOjWzCJxLB4/AwDPv1bXnfXoNQhErAAxvXG9anvtHAewQYB3MAyrp0bu19hw2sVTP1iEzDPUCnQT99Vb7tSGtYnepUh+zJ5aZJk0UhyR3sBX0dFy6eO2stOPC3tlHIKc9ebt/a/I= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; c=relaxed/simple; bh=dLRXYHpaUy1k4To1S+AMp8RCzOtLlwgu5P7jxOUWIeM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=IiHl+Q6dnW9p7OMtAdY5mpYzyZTjwQRShxOPzkHgY7914Etbdh1wG2RGtyMnGPdKz4cl9Bc9TOt+I2lwUejfn6QksHaD64zC/1+k0K7EEQx/gt6ZZReac6HEpKEoGbIYpOl2QK4p0c5Plqj2JPUkynQKGzkmPU+MVbakzUsMY+U= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=gM5qtJ1F; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="gM5qtJ1F" Received: by smtp.kernel.org (Postfix) with ESMTPS id A5832C4CEE5; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1736981172; bh=dLRXYHpaUy1k4To1S+AMp8RCzOtLlwgu5P7jxOUWIeM=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=gM5qtJ1F5Nn8Yz2RxpDQPOYhYe2gkjJWEkoSUYckY+J7CxRIHi9lXk8zIipnGtDh+ oTHnhOIyMnJgNdk+yqFwwk7TQIRxugTVOncEYjNbMw078Rd+IaVIVPSi51YGPvnKV0 OmyDi7ALDrNqUqu6xm3gOVleim/aKTl0IXpsdCpsVCIScdDuEIYTzkIVYYkqTxrFAV omyhF+0uZhMSyVfmbHxY5hpPpvC+LCQfisIR5azATwMC3q6js+FNfuKFp2ecfFAkJn bzC6MCNB3SUpDkYwJuxgdKFxn5cWTxVNBIPwf2ghT8C23TsJlKI90zywKH9AXjFEgw uO3D1xZfUgpoA== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9116DC02180; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) From: Sasha Finkelstein via B4 Relay Date: Wed, 15 Jan 2025 23:46:06 +0100 Subject: [PATCH v4 2/4] input: apple_z2: Add a driver for Apple Z2 touchscreens Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20250115-z2-v4-2-d7361ab16ba0@gmail.com> References: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> In-Reply-To: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> To: Hector Martin , Sven Peter , Alyssa Rosenzweig , Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg Cc: asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sasha Finkelstein , Janne Grunau , Neal Gompa X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1736981170; l=15768; i=fnkl.kernel@gmail.com; s=20241124; h=from:subject:message-id; bh=93QMpNoVeVx64bXDds/UkIGKjo9AaHoBKTBBUP6jpdU=; b=HbGIDPSh2tVHEAbIWVXuZ5sB8U26O13XAPecEFvsujuF5EKQt5/lX5q6ubGS4oJzBqntFNUFT l6C+cmZvKyzDnZQuHU4WWMoBGXmuYM1luXnbsEEvbCUemfk9HstFSzv X-Developer-Key: i=fnkl.kernel@gmail.com; a=ed25519; pk=aSkp1PdZ+eF4jpMO6oLvz/YfT5XkBUneWwyhQrOgmsU= X-Endpoint-Received: by B4 Relay for fnkl.kernel@gmail.com/20241124 with auth_id=283 X-Original-From: Sasha Finkelstein Reply-To: fnkl.kernel@gmail.com From: Sasha Finkelstein Adds a driver for Apple touchscreens using the Z2 protocol. Signed-off-by: Janne Grunau Reviewed-by: Neal Gompa Signed-off-by: Sasha Finkelstein --- drivers/input/touchscreen/Kconfig | 13 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/apple_z2.c | 454 +++++++++++++++++++++++++++++++++++ 3 files changed, 468 insertions(+) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1a03de7fcfa66c0f60768be17d776a79e36e570e..6c885cc58f323b3628538d41460248f8ab1dbf7d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -103,6 +103,19 @@ config TOUCHSCREEN_ADC To compile this driver as a module, choose M here: the module will be called resistive-adc-touch.ko. +config TOUCHSCREEN_APPLE_Z2 + tristate "Apple Z2 touchscreens" + default ARCH_APPLE + depends on SPI + help + Say Y here if you have an Apple device with + a touchscreen or a touchbar. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called apple_z2. + config TOUCHSCREEN_AR1021_I2C tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 82bc837ca01e2ee18c5e9c578765d55ef9fab6d4..97a025c6a3770fb80255246eb63c11688ebd79eb 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADC) += resistive-adc-touch.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o +obj-$(CONFIG_TOUCHSCREEN_APPLE_Z2) += apple_z2.o obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o diff --git a/drivers/input/touchscreen/apple_z2.c b/drivers/input/touchscreen/apple_z2.c new file mode 100644 index 0000000000000000000000000000000000000000..4a5ea252961a727e9fc1f8f335d0fb36f3263415 --- /dev/null +++ b/drivers/input/touchscreen/apple_z2.c @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Apple Z2 touchscreen driver + * + * Copyright (C) The Asahi Linux Contributors + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define APPLE_Z2_NUM_FINGERS_OFFSET 16 +#define APPLE_Z2_FINGERS_OFFSET 24 +#define APPLE_Z2_TOUCH_STARTED 3 +#define APPLE_Z2_TOUCH_MOVED 4 +#define APPLE_Z2_CMD_READ_INTERRUPT_DATA 0xEB +#define APPLE_Z2_HBPP_CMD_BLOB 0x3001 +#define APPLE_Z2_FW_MAGIC 0x5746325A +#define LOAD_COMMAND_INIT_PAYLOAD 0 +#define LOAD_COMMAND_SEND_BLOB 1 +#define LOAD_COMMAND_SEND_CALIBRATION 2 +#define CAL_PROP_NAME "apple,z2-cal-blob" + +struct apple_z2 { + struct spi_device *spidev; + struct gpio_desc *reset_gpio; + struct input_dev *input_dev; + struct completion boot_irq; + bool booted; + int index_parity; + struct touchscreen_properties props; + const char *fw_name; + u8 *tx_buf; + u8 *rx_buf; +}; + +struct apple_z2_finger { + u8 finger; + u8 state; + __le16 unknown2; + __le16 abs_x; + __le16 abs_y; + __le16 rel_x; + __le16 rel_y; + __le16 tool_major; + __le16 tool_minor; + __le16 orientation; + __le16 touch_major; + __le16 touch_minor; + __le16 unused[2]; + __le16 pressure; + __le16 multi; +} __packed; + +struct apple_z2_hbpp_blob_hdr { + __le16 cmd; + __le16 len; + __le32 addr; + __le16 checksum; +}; + +struct apple_z2_fw_hdr { + __le32 magic; + __le32 version; +}; + +struct apple_z2_read_interrupt_cmd { + u8 cmd; + u8 counter; + u8 unused[12]; + __le16 checksum; +}; + +static void apple_z2_parse_touches(struct apple_z2 *z2, char *msg, size_t msg_len) +{ + int i; + int nfingers; + int slot; + int slot_valid; + struct apple_z2_finger *fingers; + + if (msg_len <= APPLE_Z2_NUM_FINGERS_OFFSET) + return; + nfingers = msg[APPLE_Z2_NUM_FINGERS_OFFSET]; + fingers = (struct apple_z2_finger *)(msg + APPLE_Z2_FINGERS_OFFSET); + for (i = 0; i < nfingers; i++) { + slot = input_mt_get_slot_by_key(z2->input_dev, fingers[i].finger); + if (slot < 0) { + dev_warn(&z2->spidev->dev, "unable to get slot for finger\n"); + continue; + } + slot_valid = fingers[i].state == APPLE_Z2_TOUCH_STARTED || + fingers[i].state == APPLE_Z2_TOUCH_MOVED; + input_mt_slot(z2->input_dev, slot); + if (!input_mt_report_slot_state(z2->input_dev, MT_TOOL_FINGER, slot_valid)) + continue; + touchscreen_report_pos(z2->input_dev, &z2->props, le16_to_cpu(fingers[i].abs_x), + le16_to_cpu(fingers[i].abs_y), true); + input_report_abs(z2->input_dev, ABS_MT_WIDTH_MAJOR, + le16_to_cpu(fingers[i].tool_major)); + input_report_abs(z2->input_dev, ABS_MT_WIDTH_MINOR, + le16_to_cpu(fingers[i].tool_minor)); + input_report_abs(z2->input_dev, ABS_MT_ORIENTATION, + le16_to_cpu(fingers[i].orientation)); + input_report_abs(z2->input_dev, ABS_MT_TOUCH_MAJOR, + le16_to_cpu(fingers[i].touch_major)); + input_report_abs(z2->input_dev, ABS_MT_TOUCH_MINOR, + le16_to_cpu(fingers[i].touch_minor)); + } + input_mt_sync_frame(z2->input_dev); + input_sync(z2->input_dev); +} + +static int apple_z2_read_packet(struct apple_z2 *z2) +{ + struct apple_z2_read_interrupt_cmd *len_cmd = (void *)z2->tx_buf; + struct spi_transfer xfer; + int error; + size_t pkt_len; + + memset(&xfer, 0, sizeof(xfer)); + len_cmd->cmd = APPLE_Z2_CMD_READ_INTERRUPT_DATA; + len_cmd->counter = z2->index_parity + 1; + len_cmd->checksum = + cpu_to_le16(APPLE_Z2_CMD_READ_INTERRUPT_DATA + len_cmd->counter); + z2->index_parity = !z2->index_parity; + xfer.tx_buf = z2->tx_buf; + xfer.rx_buf = z2->rx_buf; + xfer.len = sizeof(*len_cmd); + + error = spi_sync_transfer(z2->spidev, &xfer, 1); + if (error) + return error; + + pkt_len = (get_unaligned_le16(z2->rx_buf + 1) + 8) & (-4); + + error = spi_read(z2->spidev, z2->rx_buf, pkt_len); + if (error) + return error; + + apple_z2_parse_touches(z2, z2->rx_buf + 5, pkt_len - 5); + + return 0; +} + +static irqreturn_t apple_z2_irq(int irq, void *data) +{ + struct spi_device *spi = data; + struct apple_z2 *z2 = spi_get_drvdata(spi); + + if (unlikely(!z2->booted)) + complete(&z2->boot_irq); + else + apple_z2_read_packet(z2); + + return IRQ_HANDLED; +} + +static int apple_z2_build_cal_blob(struct apple_z2 *z2, u32 address, size_t cal_size, char *data) +{ + u16 len_words = (cal_size + 3) / 4; + size_t hdr_size = sizeof(struct apple_z2_hbpp_blob_hdr); + u32 checksum = 0; + u16 checksum_hdr = 0; + int i; + struct apple_z2_hbpp_blob_hdr *hdr; + int error; + + hdr = (struct apple_z2_hbpp_blob_hdr *)data; + hdr->cmd = cpu_to_le16(APPLE_Z2_HBPP_CMD_BLOB); + hdr->len = cpu_to_le16(len_words); + hdr->addr = cpu_to_le32(address); + + for (i = 2; i < 8; i++) + checksum_hdr += data[i]; + + hdr->checksum = cpu_to_le16(checksum_hdr); + error = device_property_read_u8_array(&z2->spidev->dev, CAL_PROP_NAME, + data + hdr_size, cal_size); + if (error) + return error; + + for (i = 0; i < cal_size; i++) + checksum += data[i + hdr_size]; + + put_unaligned_le32(checksum, data + cal_size + hdr_size); + return 0; +} + +static int apple_z2_send_firmware_blob(struct apple_z2 *z2, const char *data, u32 size, bool init) +{ + struct spi_message msg; + struct spi_transfer blob_xfer, ack_xfer; + int error; + + z2->tx_buf[0] = 0x1a; + z2->tx_buf[1] = 0xa1; + + spi_message_init(&msg); + memset(&blob_xfer, 0, sizeof(blob_xfer)); + memset(&ack_xfer, 0, sizeof(ack_xfer)); + + blob_xfer.tx_buf = data; + blob_xfer.len = size; + blob_xfer.bits_per_word = init ? 8 : 16; + spi_message_add_tail(&blob_xfer, &msg); + + ack_xfer.tx_buf = z2->tx_buf; + ack_xfer.len = 2; + spi_message_add_tail(&ack_xfer, &msg); + + reinit_completion(&z2->boot_irq); + error = spi_sync(z2->spidev, &msg); + if (error) + return error; + + /* Irq only happens sometimes, but the thing boots reliably nonetheless */ + wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20)); + + return 0; +} + +static int apple_z2_upload_firmware(struct apple_z2 *z2) +{ + const struct apple_z2_fw_hdr *fw_hdr; + size_t fw_idx = sizeof(struct apple_z2_fw_hdr); + int error; + u32 load_cmd; + u32 size; + u32 address; + char *data; + bool init; + size_t cal_size; + + const struct firmware *fw __free(firmware) = NULL; + error = request_firmware(&fw, z2->fw_name, &z2->spidev->dev); + if (error) { + dev_err(&z2->spidev->dev, "unable to load firmware"); + return error; + } + + fw_hdr = (const struct apple_z2_fw_hdr *)fw->data; + if (le32_to_cpu(fw_hdr->magic) != APPLE_Z2_FW_MAGIC || le32_to_cpu(fw_hdr->version) != 1) { + dev_err(&z2->spidev->dev, "invalid firmware header"); + return -EINVAL; + } + + /* + * This will interrupt the upload half-way if the file is malformed + * As the device has no non-volatile storage to corrupt, and gets reset + * on boot anyway, this is fine. + */ + while (fw_idx < fw->size) { + if (fw->size - fw_idx < 8) { + dev_err(&z2->spidev->dev, "firmware malformed"); + return -EINVAL; + } + + load_cmd = le32_to_cpu(*(__le32 *)(fw->data + fw_idx)); + fw_idx += sizeof(u32); + if (load_cmd == LOAD_COMMAND_INIT_PAYLOAD || load_cmd == LOAD_COMMAND_SEND_BLOB) { + size = le32_to_cpu(*(__le32 *)(fw->data + fw_idx)); + fw_idx += sizeof(u32); + if (fw->size - fw_idx < size) { + dev_err(&z2->spidev->dev, "firmware malformed"); + return -EINVAL; + } + init = load_cmd == LOAD_COMMAND_INIT_PAYLOAD; + error = apple_z2_send_firmware_blob(z2, fw->data + fw_idx, + size, init); + if (error) + return error; + fw_idx += size; + } else if (load_cmd == LOAD_COMMAND_SEND_CALIBRATION) { + address = le32_to_cpu(*(u32 *)(fw->data + fw_idx)); + fw_idx += sizeof(u32); + cal_size = device_property_count_u8(&z2->spidev->dev, CAL_PROP_NAME); + if (cal_size != 0) { + size = cal_size + sizeof(struct apple_z2_hbpp_blob_hdr) + 4; + data = kzalloc(size, GFP_KERNEL); + error = apple_z2_build_cal_blob(z2, address, cal_size, data); + if (!error) + error = apple_z2_send_firmware_blob(z2, data, size, 16); + kfree(data); + if (error) + return error; + } + } else { + dev_err(&z2->spidev->dev, "firmware malformed"); + return -EINVAL; + } + if (fw_idx % 4 != 0) + fw_idx += 4 - (fw_idx % 4); + } + + + z2->booted = true; + apple_z2_read_packet(z2); + return 0; +} + +static int apple_z2_boot(struct apple_z2 *z2) +{ + int timeout; + int error; + + reinit_completion(&z2->boot_irq); + enable_irq(z2->spidev->irq); + gpiod_set_value(z2->reset_gpio, 0); + timeout = wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20)); + if (timeout == 0) + return -ETIMEDOUT; + + error = apple_z2_upload_firmware(z2); + if (error) { + gpiod_set_value(z2->reset_gpio, 1); + disable_irq(z2->spidev->irq); + } + return error; +} + +static int apple_z2_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct apple_z2 *z2; + int error; + + z2 = devm_kzalloc(dev, sizeof(*z2), GFP_KERNEL); + if (!z2) + return -ENOMEM; + + z2->tx_buf = devm_kzalloc(dev, sizeof(struct apple_z2_read_interrupt_cmd), GFP_KERNEL); + z2->rx_buf = devm_kzalloc(dev, 4096, GFP_KERNEL); + if (!z2->tx_buf || !z2->rx_buf) + return -ENOMEM; + + z2->spidev = spi; + init_completion(&z2->boot_irq); + spi_set_drvdata(spi, z2); + + /* Reset the device on boot */ + z2->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(z2->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(z2->reset_gpio), "unable to get reset"); + + error = devm_request_threaded_irq(dev, z2->spidev->irq, NULL, + apple_z2_irq, IRQF_ONESHOT | IRQF_NO_AUTOEN, + "apple-z2-irq", spi); + if (error) + return dev_err_probe(dev, z2->spidev->irq, "unable to request irq"); + + error = device_property_read_string(dev, "firmware-name", &z2->fw_name); + if (error) + return dev_err_probe(dev, error, "unable to get firmware name"); + + z2->input_dev = devm_input_allocate_device(dev); + if (!z2->input_dev) + return -ENOMEM; + z2->input_dev->name = (char *)spi_get_device_id(spi)->driver_data; + z2->input_dev->phys = "apple_z2"; + z2->input_dev->id.bustype = BUS_SPI; + + /* Allocate the axes before setting from DT */ + input_set_abs_params(z2->input_dev, ABS_MT_POSITION_X, 0, 0, 0, 0); + input_set_abs_params(z2->input_dev, ABS_MT_POSITION_Y, 0, 0, 0, 0); + touchscreen_parse_properties(z2->input_dev, true, &z2->props); + input_abs_set_res(z2->input_dev, ABS_MT_POSITION_X, 100); + input_abs_set_res(z2->input_dev, ABS_MT_POSITION_Y, 100); + input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MAJOR, 0, 65535, 0, 0); + input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MINOR, 0, 65535, 0, 0); + input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MAJOR, 0, 65535, 0, 0); + input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MINOR, 0, 65535, 0, 0); + input_set_abs_params(z2->input_dev, ABS_MT_ORIENTATION, -32768, 32767, 0, 0); + + input_set_drvdata(z2->input_dev, z2); + + error = input_mt_init_slots(z2->input_dev, 256, INPUT_MT_DIRECT); + if (error) + return dev_err_probe(dev, error, "unable to initialize multitouch slots"); + + error = input_register_device(z2->input_dev); + if (error) + return dev_err_probe(dev, error, "unable to register input device"); + + /* Wait for device reset to finish */ + usleep_range(5000, 10000); + error = apple_z2_boot(z2); + if (error) + return error; + return 0; +} + +static void apple_z2_shutdown(struct spi_device *spi) +{ + struct apple_z2 *z2 = spi_get_drvdata(spi); + + disable_irq(z2->spidev->irq); + gpiod_direction_output(z2->reset_gpio, 1); + z2->booted = false; +} + +static int apple_z2_suspend(struct device *dev) +{ + apple_z2_shutdown(to_spi_device(dev)); + return 0; +} + +static int apple_z2_resume(struct device *dev) +{ + struct apple_z2 *z2 = spi_get_drvdata(to_spi_device(dev)); + + return apple_z2_boot(z2); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(apple_z2_pm, apple_z2_suspend, apple_z2_resume); + +static const struct of_device_id apple_z2_of_match[] = { + { .compatible = "apple,j293-touchbar" }, + { .compatible = "apple,j493-touchbar" }, + {}, +}; +MODULE_DEVICE_TABLE(of, apple_z2_of_match); + +static struct spi_device_id apple_z2_of_id[] = { + { .name = "j293-touchbar", .driver_data = (kernel_ulong_t)"MacBookPro17,1 Touch Bar" }, + { .name = "j493-touchbar", .driver_data = (kernel_ulong_t)"Mac14,7 Touch Bar" }, + {} +}; +MODULE_DEVICE_TABLE(spi, apple_z2_of_id); + +static struct spi_driver apple_z2_driver = { + .driver = { + .name = "apple-z2", + .pm = pm_sleep_ptr(&apple_z2_pm), + .of_match_table = apple_z2_of_match, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = apple_z2_of_id, + .probe = apple_z2_probe, + .remove = apple_z2_shutdown, +}; + +module_spi_driver(apple_z2_driver); + +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("apple/dfrmtfw-*.bin"); +MODULE_DESCRIPTION("Apple Z2 touchscreens driver"); From patchwork Wed Jan 15 22:46:07 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sasha Finkelstein via B4 Relay X-Patchwork-Id: 13941004 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EB1551DB366; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; cv=none; b=DDd1MZ5xI8F+cJ5F6wmOT6ewVl/53DPZNNwdfz+1gCxj1YX36iTI4kwgVvJ6U5qxZlFy+sGwIjew7ClAOCjTON0OsTgsYuukcXygdkGpARgySyxgHScbSt3sD2C5rOlavzWTbaNwJ+4eIm8MB+8uKtbMWfJlQA/GzBiUNx0/x70= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; c=relaxed/simple; bh=HiVlpf6z0LthxCYAXVLZSIRNAH9pkFfwLEq5L8sEy8k=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=XJO1xNq+Pa2ab7uXXo+LVLGVwgkNMTq5gd5+QxUASN90nMu6yglOhTms40t2y6OJkbDrSv9f99oWdzXexidQ8BptUOLPazXKIIhc7m2QT9jTH/OJ7tCGD/mN3FzIqXam5ZnZN45HTSckRhhoJ5ywyXRUqHmRZ59Z/ykZdlyY1RM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=uC3SpVgp; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="uC3SpVgp" Received: by smtp.kernel.org (Postfix) with ESMTPS id B255AC4CEE7; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1736981172; bh=HiVlpf6z0LthxCYAXVLZSIRNAH9pkFfwLEq5L8sEy8k=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=uC3SpVgpFOg5ryTC77BcpKIffTIgNGHXWFIWp5L0FjGiY2qcr8dHRbFQXR862eSud gmvsRUKv9ZUtW2z2mYKUmq0A5Az4hdUr8JiQbn0mHBVURrAC8phz1Mn0zgdgL8zU/r QHNmjiuFlX57U8nT+IYXsv4dC8JrJtK6cMXjwGfhgpES/P+EMZC3mdrbVFKbJ2rHvV CFi8FyxuOGRIW2V3ZhEQRBirXPdmuQK45Ot9ZPzZduiEqVLfMrf1bGe3tDM4nTH9Ff q1DAMdZZHfTqwPePtYspGG9x+6a4rcQePfrtocvqw5ZQLS31VcVxQpiLCsb1pxb7pA fOFFHP54UMUdQ== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id A47F5C02187; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) From: Sasha Finkelstein via B4 Relay Date: Wed, 15 Jan 2025 23:46:07 +0100 Subject: [PATCH v4 3/4] arm64: dts: apple: Add touchbar digitizer nodes Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20250115-z2-v4-3-d7361ab16ba0@gmail.com> References: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> In-Reply-To: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> To: Hector Martin , Sven Peter , Alyssa Rosenzweig , Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg Cc: asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sasha Finkelstein , Janne Grunau , Neal Gompa X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1736981170; l=5193; i=fnkl.kernel@gmail.com; s=20241124; h=from:subject:message-id; bh=1gxPgxCLDO2GbcY7Z6AYrb9Le2GWgwKoXaZMJOLVIKw=; b=KiYtF52VlIsVRla8h4TiT7rEUccy8ZgXgQY7XRQky9ZC3t3FBXA2Hm2WnUoLzOugUD8cboxMe Fhv74WNHQF7AAiDmvf6IWndpAVJlBfnOBBqshYPV/fuHUgir25/sHSh X-Developer-Key: i=fnkl.kernel@gmail.com; a=ed25519; pk=aSkp1PdZ+eF4jpMO6oLvz/YfT5XkBUneWwyhQrOgmsU= X-Endpoint-Received: by B4 Relay for fnkl.kernel@gmail.com/20241124 with auth_id=283 X-Original-From: Sasha Finkelstein Reply-To: fnkl.kernel@gmail.com From: Sasha Finkelstein Adds device tree entries for the touchbar digitizer Co-developed-by: Janne Grunau Signed-off-by: Janne Grunau Reviewed-by: Neal Gompa Signed-off-by: Sasha Finkelstein --- arch/arm64/boot/dts/apple/t8103-j293.dts | 27 +++++++++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 19 +++++++++++++++++++ arch/arm64/boot/dts/apple/t8112-j493.dts | 23 +++++++++++++++++++++++ arch/arm64/boot/dts/apple/t8112.dtsi | 14 ++++++++++++++ 4 files changed, 83 insertions(+) diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 56b0c67bfcda321b60c621de092643017693ff91..0a93d3891c23da8b8c77dce64001caacb69ee140 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -17,6 +17,14 @@ / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ + aliases { + touchbar0 = &touchbar0; + }; + led-controller { compatible = "pwm-leds"; led-0 { @@ -49,3 +57,22 @@ &i2c4 { &fpwm1 { status = "okay"; }; + +&spi0 { + cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>; + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 9b0dad6b618444ac6b1c9735c50cccfc3965f947..dc72aae3844bf33579f623f0b01abc7de4033af4 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -326,6 +326,13 @@ clkref: clock-ref { clock-output-names = "clkref"; }; + clk_200m: clock-200m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "clk_200m"; + }; + /* * This is a fabulated representation of the input clock * to NCO since we don't know the true clock tree. @@ -441,6 +448,18 @@ fpwm1: pwm@235044000 { status = "disabled"; }; + spi0: spi@235100000 { + compatible = "apple,t8103-spi", "apple,spi"; + reg = <0x2 0x35100000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = ; + clocks = <&clk_200m>; + power-domains = <&ps_spi0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; /* only used in J293 */ + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts index 0ad908349f55406783942735a2e9dad54cda00ec..045bd0716cb7d20c1379ebc1e3ff7f4d0dddc179 100644 --- a/arch/arm64/boot/dts/apple/t8112-j493.dts +++ b/arch/arm64/boot/dts/apple/t8112-j493.dts @@ -17,8 +17,13 @@ / { compatible = "apple,j493", "apple,t8112", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M2, 2022)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ aliases { bluetooth0 = &bluetooth0; + touchbar0 = &touchbar0; wifi0 = &wifi0; }; @@ -67,3 +72,21 @@ &i2c4 { &fpwm1 { status = "okay"; }; + +&spi3 { + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j493-touchbar"; + reg = <0>; + spi-max-frequency = <8000000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j493.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi index 1666e6ab250bc0be9b8318e3c8fc903ccd3f3760..bb6c9e769c65330a32a3c7aa2f074c1f63e195fd 100644 --- a/arch/arm64/boot/dts/apple/t8112.dtsi +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -467,6 +467,20 @@ fpwm1: pwm@235044000 { status = "disabled"; }; + spi3: spi@23510c000 { + compatible = "apple,t8112-spi", "apple,spi"; + reg = <0x2 0x3510c000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = ; + clocks = <&clkref>; + pinctrl-0 = <&spi3_pins>; + pinctrl-names = "default"; + power-domains = <&ps_spi3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; /* only used in J493 */ + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>; From patchwork Wed Jan 15 22:46:08 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sasha Finkelstein via B4 Relay X-Patchwork-Id: 13941005 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5D4361DD87D; Wed, 15 Jan 2025 22:46:13 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; cv=none; b=czSMSO89UGZq3RjhO4R8hM6xoe+dSMQqtdFtELPH7cOLqSOjGH6ja2q7T4CsGSPASNsJkcqvWuLTS9EzO1wkhfBenN/nlbKAoM/ZYvXNzqtPtEas5LztOZHHx2PM/ZP97N6DTycHzbhh6Uc2rBLlO01/FHY86lqbj3GNy47+ouI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736981173; c=relaxed/simple; bh=mfzps7MrY/bcz2UOrFkJP6HwpcWdEzOi6VXm2UtiSLM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=HTWBjIQa35I2SuWh7Jx7a+CZUDSudKcZXcTl4HKna/ggiKPloII4wDEioQWqBc71baYC33A/UtTVVUHri8E8RZQA6ZxwXH84tUXLypkNV0cWUZ0XrHwMtAFVgHFAJtgeBUSeEtf+dB1Fo4Un1usw/VVnheBSq6nNimD73OHCSWk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=uyTzjWpd; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="uyTzjWpd" Received: by smtp.kernel.org (Postfix) with ESMTPS id CB044C4AF0E; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1736981172; bh=mfzps7MrY/bcz2UOrFkJP6HwpcWdEzOi6VXm2UtiSLM=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=uyTzjWpdC5SB7jXP4WHm60MmDCUZJyPhf9ctjTPiPuypXzFowfNIPkvyldO5uf6XX YbFtpz3IE5Dw1UEehGaYecwPPTUPHLC3rGIdlXbwVicjqwo+CwRaiK148EOfeCqXSS LLS6ofC1OFpJN2Ql1yZtI9VGrgwGmX+vEx0xNQbVXy37aS9HxzvCbqP9XT7DOE6L+A fxF/l9hnFzhXJ35uAOkgFVUOYPCKJxymiHFVKty6w2mIbsfxgzAjcfmQbS9Zm8p+ZC pXdSUnV65zbb2Ar59GN+KmMDhzpRVigYNEJv6qNhYrfX0elbVXRrg4x+2Odj7X6Iue 49w5/8UH4AP1A== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id B93C4C02185; Wed, 15 Jan 2025 22:46:12 +0000 (UTC) From: Sasha Finkelstein via B4 Relay Date: Wed, 15 Jan 2025 23:46:08 +0100 Subject: [PATCH v4 4/4] MAINTAINERS: Add entries for Apple Z2 touchscreen driver Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20250115-z2-v4-4-d7361ab16ba0@gmail.com> References: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> In-Reply-To: <20250115-z2-v4-0-d7361ab16ba0@gmail.com> To: Hector Martin , Sven Peter , Alyssa Rosenzweig , Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg Cc: asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sasha Finkelstein , Neal Gompa X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1736981170; l=1260; i=fnkl.kernel@gmail.com; s=20241124; h=from:subject:message-id; bh=DolVP44jd1KXaKyL604wEY81MMwwSbO5gUWo7+wphsY=; b=XlRk+bLP9zEGiCp9eJLiEMa05qHY5eHk0W5DNCv7FcaOdlW1QLmRgMgO2apg7DUctcOuZtl7p i0r0nBjdRVHB2/YAZGEfpwWUhtwBdaNfvKkTTF5+fcAup8RX8Byxn88 X-Developer-Key: i=fnkl.kernel@gmail.com; a=ed25519; pk=aSkp1PdZ+eF4jpMO6oLvz/YfT5XkBUneWwyhQrOgmsU= X-Endpoint-Received: by B4 Relay for fnkl.kernel@gmail.com/20241124 with auth_id=283 X-Original-From: Sasha Finkelstein Reply-To: fnkl.kernel@gmail.com From: Sasha Finkelstein Add the MAINTAINERS entries for the driver Reviewed-by: Neal Gompa Signed-off-by: Sasha Finkelstein --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a87ddad78e26f28ffd0f3433560d6db1518f9f95..8b3776eb748e128f87c44886b117e0652447fb37 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2191,6 +2191,7 @@ F: Documentation/devicetree/bindings/clock/apple,nco.yaml F: Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml F: Documentation/devicetree/bindings/dma/apple,admac.yaml F: Documentation/devicetree/bindings/i2c/apple,i2c.yaml +F: Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml F: Documentation/devicetree/bindings/interrupt-controller/apple,* F: Documentation/devicetree/bindings/iommu/apple,dart.yaml F: Documentation/devicetree/bindings/iommu/apple,sart.yaml @@ -2211,6 +2212,7 @@ F: drivers/dma/apple-admac.c F: drivers/pmdomain/apple/ F: drivers/i2c/busses/i2c-pasemi-core.c F: drivers/i2c/busses/i2c-pasemi-platform.c +F: drivers/input/touchscreen/apple_z2.c F: drivers/iommu/apple-dart.c F: drivers/iommu/io-pgtable-dart.c F: drivers/irqchip/irq-apple-aic.c